Extraordinary design of the walls of the bathhouse and dressing room. Design of a dressing room inside a small bathhouse: best design tips

home

Information Security

Selection of finishing materials - PVC panels, lining, block house

When choosing materials for finishing a steam room, it is also necessary to take into account not only the decorative component, but also the properties that a particular material has. I'll probably start with PVC panels. Among their positive aspects we can highlight relatively low price, as well as ease of installation. If we add to this a huge range of colors, as well as moisture resistance, then the material may seem ideal. Unfortunately, rarely does anyone decide to decorate their dressing room with it, because plastic will not create that unique aroma natural wood, which is capable of immersing a person leaving the steam room in an atmosphere of comfort and peace. Among other things, PVC panels are quite vulnerable to mechanical damage, and are also capable of conducting too much heat. This option should be considered only in case of serious financial constraints.

The next material to consider is lining. It gives the room a pleasant appearance and warmth, and also fills it with incredible aromas that promote calm and help restore strength. It should be noted that decorating walls with clapboard is a rather labor-intensive task that requires special care and attention, but at the same time it can be done with your own hands.

The third option for finishing the dressing room is a block house. Perhaps it has the greatest number of positive aspects. Let me start by saying that it is completely environmentally friendly. The fact is that it is made exclusively from high-quality wood, which has previously undergone a drying process in several stages.

When we're talking about about the block house from coniferous species wood, this is a guarantee of high quality material. This finishing makes it possible to ensure the correct microclimate in the dressing room. It is advisable not to use a block house made of deciduous trees for the same purposes, since it is characterized by increased hardness, which in the case of a bathhouse is not a relevant requirement. The block house provides a natural level of waterproofing and resistance to decay processes due to the presence of natural resins in its composition.

The block house can withstand external influences of varying levels of intensity without losing its original appearance.

Installation work step by step Once the choice of material has been made, you can proceed to the installation stage. I will tell you in more detail about how to decorate a dressing room using clapboard. It all starts with the fact that the ceiling and walls are sheathed with slats in increments of forty centimeters, determining the horizontal or vertical position of the boards during finishing. A layer of insulation, for example, felt or mineral wool, can be laid between the slats. This will ensure required level

warmth in the dressing room.

To create a vapor barrier layer, you can attach foil over the insulation.

The first board is installed using self-tapping screws with clamps, which make it possible to hide the attachment point from prying eyes. The next board should be installed with the existing tongue and groove, thus filling the ceiling and all the walls, after which the room becomes completely finished with wood, which makes it an excellent place for quality relaxation.

Floors in the waiting room The process of finishing floors in dressing rooms must take into account the fact that the room is different increased level humidity, which can cause rotting, which can only be prevented by high-quality waterproofing and properly arranged water drainage. It's best if flooring will be from natural materials

. Perhaps even with insulation or a built-in “warm floor” system.

Perhaps the easiest way to create floors in this type of room is to go with the earthen version. Unfortunately, under constant exposure to moisture, they can become ordinary dirt, since the soil will allow water to pass through in any case. Therefore, a more optimal option is a clay floor, which allows a minimum amount of moisture to pass through.

Successful design solutions

Fortunately, the internal type of finishing of the dressing room is by no means limited to the standard set of actions affecting the aspect of insulation and cladding. In order for your stay in the bathhouse to be as comfortable and enjoyable as possible, the dressing room must be thought out to the smallest detail. Often, the classic style of a Russian bathhouse is used to decorate this room, creating an authentic atmosphere and special comfort.

How to finish a dressing room - an overview of types

The main purpose of the dressing room is to retain air from the street, which helps maintain the temperature inside the bathhouse. How to finish the dressing room?

How to cover a waiting room with clapboard to get a comfortable room

How to line a dressing room with clapboard, which is designed not only to protect against cold air entering the steam room, but also serves as a relaxation room. In it you can undress and prepare for the sacrament of bath procedures, and then relax over a leisurely conversation with a cup of tea in your hands.

Building a dressing room with your own hands can bring joy to the owners, and if you finish it yourself, the dressing room will acquire a unique style, as in the photo, and will receive the necessary insulation. Is it possible to imagine a Russian bathhouse without a dressing room?

Getting a warm dressing room is not so easy. Its decoration, which makes this room one of the most important in the bathhouse, requires certain skills and abilities.

Beginning of work

It is difficult to imagine a bathhouse without heating, but it is better to do it with the help of professionals, including the dressing room. You can tackle wall cladding yourself; the video in this article will help you follow the master step by step.

The thermal insulation of the dressing room must be approached very conscientiously.

Strict requirements are imposed on the insulation:

The material must be moisture resistant, inorganic, fireproof and environmentally friendly.
As a rule, foiled polyethylene is used for insulation; liquid glass is used much less often. Foil polyethylene levels out temperature changes when moving from the street to the dressing room and from the dressing room to the steam room.
How to line a bathhouse with clapboard to get additional thermal insulation? Exterior decoration plays a role here. It can be made not only from lining, but also from other materials.
Polystyrene foam, polyurethane foam, mineral wool, glass wool, and extruded polystyrene foam are used as insulation.
Behind last years The material has gained momentum and popularity, aptly nicknamed by the people “special insulation for the dressing room,” which can be conveniently installed independently and is available in convenient packages.
The insulation has the property of maintaining temperature, which provides a comfortable atmosphere inside the room, and the walls of the dressing room can be insulated with it very easily.
A finished dressing room cannot do without free air circulation; this is an indispensable condition that prevents the accumulation of condensation.
The absence of condensation will prevent the processes of rotting of wooden log products, and the correct installation of heating will contribute to its safety and long-term operation.
How to line a bathhouse with clapboard video will allow you to follow the whole process with your own eyes, because the dressing room should be beautiful and warm.

How to line a bathhouse with clapboard to get the best possible result worries many.
Professionals answer this question and give recommendations.
When finishing the dressing room, do not leave a single gap.
The calculation of the size of the room area is carried out according to the principle of 1.3 m² per person, which avoids crowding and unnecessary stuffiness.
The dressing room should provide containers for shoes and necessary small items, without which bath procedures are indispensable.
Place comfortable seats, hang harvested or grown food on the walls. own plot herbs that are good for health.
Coal and firewood should not be dumped in bulk in front of the stove; boxes are suitable for them, which are easily made using carpentry tools.
Elementary logic and your own desires will tell you whether you can limit yourself to these tips or go even further in arranging the dressing room.

Are windows needed in the dressing room?

Many owners will definitely answer that they are not needed, believing that they worsen the thermal characteristics of the room.

Experts and instructions recommend not to give up natural light:

It is important to install reliable double-glazed windows with good insulation outside, inside and insulated window slopes.
The window sill is installed from the floor at a distance of one and a half meters.
There is no need to have plastic windows in the dressing room.
Manufacturers produce high-quality double-glazed windows in wooden frames.

Attention: To obtain the desired result, a double-glazed window is selected; the window is made non-opening to avoid drafts.

How to cover a bathhouse with clapboard video allows you to understand that you can’t do without ventilation and exhaust in the dressing room, and in the entire bathhouse room as a whole, even if it’s a pity to violate the integrity of the finish.
A properly executed ventilation system allows you not only to enjoy bathing procedures, but also to preserve the wood long years, which is facilitated by drying, ventilation and the creation of a thermal regime.
Ventilation regulates air exchange, providing both inflow fresh air, and the outflow of moist, exhaust air.
Here we need to return again to the question of the need for a window in the dressing room.
Windows and doors have always been sources of natural ventilation, and the supply of fresh air and the removal of humid air is carried out through special vents cut into the mass itself and closed with sliding plugs.

Vent plug

They are made in small sizes, 15 x 20 cm, the bottom one serves for air flow and is located no higher than 50 cm from the floor and closer to the firebox.
To release waste, humid air an outlet is made on the opposite wall to the steam room, 2 meters from the floor.

Attention: Forced ventilation is ensured by installing a fan in the exhaust hole, which accelerates the removal of moist air.

It follows from this that a small window can be made in the bathhouse, and a full-fledged window opening can be provided in the dressing room?

Insulation of the main components of the dressing room

The floor can be considered the basis of the dressing room, answering the question of how to line a bathhouse with clapboard to get a cozy, warm room.
It can be noted here that there is a misconception not to worry about this problem. Many owners are ready to buy any wood as long as the price is right.
“The greedy pays twice” and any wood can ruin all your deepest desires.
The humidity in the dressing room is somewhat lower than the steam room, but the wood for the floors must be chosen based on this feature, that is, not subject to rotting processes - oak, larch.
Experts do not recommend pouring the floor of the waiting room with concrete. Imagine your steamed body running out into a dressing room with a cold floor.
You can hear objections from knowledgeable craftsmen who suggest throwing a rug under your feet.
And yet, the appropriate temperature must be in all rooms of the bathhouse, which is largely ensured by heated floors.
How to cover a bathhouse with clapboard video presents the sequence of work after laying the floor in the dressing room, insulating it and correspondingly treating it with an antiseptic.
A good start to work, and quality materials provide half the job; the rest, carried out taking into account the features and nuances, ensures a positive result of the final work.
The correct choice of wood for cladding or tongue and groove boards plays an important role. Of course, you can argue that the material on the walls is not as susceptible to moisture as on the floor, but condensation? Where will it go before it dries?
How to place the lining on the walls is a matter of taste. The traditional technique involves a vertical arrangement; less often, owners choose a horizontal or diagonal arrangement of boards. Recently, the method of laying overlapping lining has gained popularity.
How to cover a dressing room with clapboard for an aesthetic appearance?

It’s also not a question, here the owner is a gentleman, choosing between coniferous or deciduous trees. It is important to choose the right wood treatment so that it can stand for a long time in a hot and humid room with temperature changes.

The desired effect cannot be achieved without an insulated door, because heat has the ability to flow through the cracks of the doorway.
The process of insulating a door is not so complicated that it requires inviting outside specialists. You need to stock up on timber, a sheet of plywood and insulation. A beam is placed around the perimeter of the door, the resulting space is laid with insulation and covered with plywood on top.

The final chord of the dressing room

How to fix the lining in a bathhouse on the ceiling and walls, and most importantly, with what and in what way? Installation of lining on insulated wooden walls is carried out taking into account a certain technology.

The lining is brought into the dressing room and left for a day to get used to the microclimate.
Someone attaches the bars to the wall with self-cuts in increments of 50 cm, then uses a construction stapler to attach foil polystyrene foam to the bars and walls. Others simply fix this material on the walls, paying special attention to corners and joints.
The resulting structure is covered with clapboard, the installation of which begins from top to bottom.
To answer the question of how to fix the lining in a bathhouse, there are 4 ways:

Through fastening with nails into wood or screws into concrete or brick. It can be classified as simple and quick methods, but with drawbacks. Nails driven flush into a board become hot and rust over time.
Hidden fastening with screws for those who cannot stand the look of orderly rows of nail heads.

Then a hole is drilled for the screw with a depth greater than the thickness of the head. The cut itself is screwed in, and the hole is masked with a wooden spike and sanded.

Invisible fastening with nails that does not interfere with the aesthetic perception of the room. However, this work requires skills, because a thin groove is easily pricked with nails and you can ruin more than one board product if you don’t have experience.
Experts recommend using hidden fastening with clamps. It does not take much time, does not require any experience or skills, and does not spoil the appearance of the resulting surface.

It remains to provide a waiting room sunlight, A modern technologies They allow you to maintain the temperature in the dressing room and push the issue of window size into the background, and think about the interior.

Based on the fact that the room is intended for relaxation, preference is given to the classic style of the Russian bathhouse in the design. The owners of many bathhouses are moving away from accepted stereotypes, and then the interior becomes a platform for fantasy.

Features of dressing room finishing

To do good bath, it must have a steam room and a dressing room. If there is a lot of information about the steam room, then such an issue as finishing the dressing room is often not given due attention.

The dressing room can serve not only for storing bath accessories, but also as a relaxation room.

The dressing room is of great importance, since it serves not only for changing clothes, but also as a place to relax. Therefore, special attention must be paid to its arrangement. If you decorate this room correctly, select furniture for the dressing room, then you will have a cozy place where you can relax, take a breath, drink tea, just relax and chat with friends.

What is the dressing room used for?

The main purpose of this room is to prevent cold air from entering the steam room.

To make the bathhouse modern and cozy, most often this room is made spacious. And to keep it warm and comfortable, you need to insulate the dressing room.

Depending on the size of the dressing room, not only a locker room is made in it, but also a table, benches, and other furniture are installed, which allows you to comfortably spend time between visits to the steam room.

To ensure optimal temperature conditions in the dressing room, you can install a fireplace.

Each owner makes the design of the waiting room to his own taste. If bright lighting is not needed in the steam room, then here bright light is necessary and it is better that it be natural. Therefore, it is worth considering the arrangement of windows. In this case, you need to install quality windows so that they do not allow additional cold into the room.

It will be necessary to decide how to insulate the dressing room, since it should be comfortable, and it should not let cold air into the steam room. Properly performed thermal insulation of the dressing room will make your stay in it pleasant and cozy.

To ensure optimal temperature conditions in the dressing room, you can install a fireplace (electric or wood-burning). This solution will not only heat the room, but also give it comfort. If the dressing area is large, you can install a sofa, armchairs, a massage table and other interior items. It all depends on your desires and capabilities.

Interior decoration

If you did wooden sauna, then the walls are usually not decorated inside. The wood already looks beautiful, all you have to do is impregnate it with special compounds to protect it from moisture and extend its service life; all this can be done with your own hands.

If you use an old building for a bathhouse or made it out of brick, then you will need to carry out its interior decoration.

Scheme of a bathhouse with a large dressing room.

The bathhouse and dressing room are rooms that often experience high humidity. This must be taken into account when choosing finishing material. Despite the rather difficult conditions, various materials can be used to decorate the inside of the dressing room.

If you choose the right texture and combination of colors, then you can make any design for the specified room, decorate it in both the classical style and in the modern style or any other.

Just finishing the walls will not be enough. Great importance has the right selection of accessories, such as wicker lamps, rattan furniture Perfect for arranging a dressing room.

The walls of the room can be sheathed, for example, with a block house, clapboard, PVC panels. If you decide to use plastic panels, then they cannot be installed on the wall adjacent to the steam room.

The floor in the dressing room is most often covered with ceramic tiles, as this is a durable and beautiful material that is not afraid high humidity. When choosing it, preference should be given to tiles that are not afraid of temperature changes, have an anti-slip coating and can withstand heavy loads. Use linoleum, laminate or other synthetic materials This is not possible, because at high temperatures and humidity they will quickly fail. In addition, they are environmentally unsafe.

To create an optimal microclimate and a cozy environment, wood is considered the best material for finishing both the steam room and the dressing room.

Application of PVC panels and paint

Installation PVC wall panels in the dressing room.

PVC wall panels are low cost and have a wide selection color solutions, which makes them quite popular materials for finishing dressing rooms.

Anyone can install House master. To do this, you must first install the frame, but if the walls are wooden and smooth, you can mount such panels without a frame.

The only inconvenience when installing PVC panels is that they cannot be installed on the wall adjacent to the steam room, since high temperatures will lead to their rapid failure. In addition, at high temperatures they can release substances harmful to health.

You can simply paint the walls; rubber-based paint is perfect for this. It is suitable for covering any surface and tolerates high humidity well.

It is applied, like regular paint, to a clean and smooth surface. This should be done using a roller or brush; You can also use a spray gun, but it is suitable for large rooms. To strengthen the surface, you can coat it with a special primer before applying paint.

Cladding with block house or clapboard

If you have made a large room for the dressing room, then a material such as a block house is perfect for wall decoration. This material imitates natural walls from logs. The larger the radius of curvature, the more natural it looks. The width of the panels varies from 90 to 260 mm.

Decorating the walls with a block house in the dressing room.

For installation of this material you need to make the sheathing first. Be sure to take into account that in this case the room will be reduced by the width of the timber used for the sheathing and the thickness of the panels themselves, which is 13-50 mm.

If you install the block house yourself, the most problems will arise with joining the panels in the corners. In this case, each panel will need to be cut individually, because it is not always possible to make a room with right angles. There will also be difficulties when joining with window and door openings. To avoid problems with wiring, it can be made open. In this case, the wires are hidden in special channels.

Very popular material For finishing the dressing room there is lining. Most often they use wooden lining, which looks great, has an affordable price and its installation can be done by yourself. The planks must be installed in a horizontal position so that moisture does not remain in the seams.

You can purchase lining of various thicknesses, it is available from 11 to 22 mm; The best option for finishing the walls in the dressing room is considered to be a material with a thickness of 14-16 mm. The type of wood from which the panels are made is selected individually, based on your preferences and financial capabilities.

Scheme of wall insulation in the dressing room.

If the walls are smooth, then installation can be carried out without lathing. But this happens very rarely, so they usually do lathing. The pitch between the vertical bars is 60-100 mm. The presence of grooves and tongues makes the installation of this material simple and quick, and the joint will have high density and reliability.

The difference between eurolining and regular lining is that on its back side there are special channels through which excess moisture. This allows you to get rid of the formation of condensation on the walls.

Various types of wood can be used to make a lining or block house:

oak - has high water resistance, its smell helps reduce blood pressure;
Canadian cedar - releases antibacterial substances, treats respiratory diseases, improves immunity;
linden - raises tone, adds strength;
aspen - relieves anxiety, calms the nerves;
larch - prevents colds and helps reduce blood pressure;
pine - renders bactericidal effect, increases immunity.

Is it worth treating wooden surfaces?

Today, experts do not have a clear opinion on this issue. If some point out that after impregnation of wood with special compounds, its service life increases, then others note that evaporation from chemical compositions negatively affect human health.

Whether or not to process wooden finishing elements, each owner must decide for himself. Most often, the wood in the steam room is not treated in any way, but special compounds are used for this in the dressing room.

Such impregnations allow the formation of a film on the surface of the wood, which prevents the growth of fungus and mold, and thus increases the service life of wooden elements.

If you decide to process the lining, then you need to do this once before installing the panels, and a second time after their installation. To ensure maximum protection of the wooden surface, treatment with such compounds should be carried out 2 times a year.

Since people go to the bathhouse not only to wash themselves, but also to gain health, one must approach the arrangement of all its premises responsibly and carefully. At the same time, it is necessary to choose the material not only on the basis of price, but also taking into account the quality and environmental safety. Only in this case, after visiting the bathhouse, you will gain health, vigor and strength.

Do-it-yourself dressing room decoration

To make a good bathhouse, it must have a steam room and a dressing room. If there is a lot of information about the steam room, then such an issue as finishing the dressing room is often not given due attention.

Do-it-yourself dressing room for a bath: construction, insulation and finishing

A functional bathhouse, equipped with everything necessary for health procedures, is the object of desire of many land owners.

The dressing room in the bathhouse is an important part of the structure, which not only prevents the cold from penetrating into the steam room, but also allows you to fully enjoy your bathing holiday.

What is the dressing room used for?

A properly equipped dressing room can become a full-fledged functional room in any bathhouse. As a rule, it is located between the steam room and the sink, so it is used:

for protection from cold and drafts penetrating indoors;
for relaxation after procedures before visiting the washing room or swimming pool;
for a change of linen and clothes that you can hang comfortably and not worry about them getting wet;
for leisure time in a warm, friendly atmosphere.

If ready sauna is not equipped with a dressing room, then you can expand the building quickly and economically. Considering in more detail the question of how to make a dressing room, it is recommended to choose a frame construction method.

The main advantages of the method are:

ease of erecting a frame with minimal foundation costs;
speed of construction;
a wide selection of materials for interior and exterior design;
high heat capacity of the structure.

How to attach a small dressing room to a bathhouse using frame technology?

Construction of the foundation for the dressing room

Before the start of construction work, a working scheme is selected and the size of the waiting room is determined. The area of the room is calculated according to to the following principle: 1.35 sq. m for 1 person. The width of the dressing room must be at least 100 cm, the length is arbitrary.

For frame structure A lightweight foundation is suitable - pile or shallow.

How to build a shallow foundation? The work is performed as follows:

They draw up plans for construction.
Prepare a trench with the required parameters: depth 55 cm, width 35 cm.
The foundation base is filled with fine sand, compacted, and wetted.
Formwork is made from boards according to the dimensions of the foundation.
Install a reinforcing base under the foundation.
Fill the formwork with concrete mixture.
The concrete base is dried and protected with a waterproofing layer of roofing felt.

Construction of frame structure

Before installing a wooden structure, all elements are carefully treated with protective and antiseptic compounds for wood.

Assembly is performed in the following sequence:

Installation bottom trim from bars with a cross section of 10 × 10 cm.
Installation of corner posts, checking the correct installation of each element using a level.
Installation of intermediate racks in 80 cm increments.
Making the top trim from bars with a section of 8 × 8 cm.
Installation in external corners bracing strips to increase the rigidity of the finished structure.
Fixing floor joists from unedged boards.
Installation of elements under openings for doors and windows.
The internal lining of the finished structure is made of membrane material, which provides protection from the penetration of wind and moisture.
External wall cladding.

Installation of a ventilation system in the dressing room

Ventilation in the dressing room is important element, which will ensure the necessary inflow and outflow of air in the room. This is required to maintain a favorable climate inside the bathhouse and maintain optimal heat transfer conditions.

The ventilation ducts for the dressing room are arranged as follows:

At a distance of 55 cm from the stove firebox we make a small hole measuring 16 × 21 cm.
We prepare a wooden damper of the required size and attach a bar with a handle to the front side.
On the side opposite the ventilation duct, we make another hole of the same size at a height of 200 cm from the floor level.
We equip the second hole with a similar damper.

flaps for ventilation ducts must always be closed.

How to insulate a dressing room correctly in order to maintain the required temperature between the steam room and other functional rooms? In this case, all surfaces are subject to insulation: walls, ceiling and floor.

Features of floor insulation

Functional sauna with warm dressing room is equipped with a base that is resistant to high humidity.

To make a warm wooden floor, it is enough to install expensive heating systems - water or electric. An affordable option is to use inert floor insulation materials - cotton wool and extruded foam.

Work on thermal insulation of the floor is carried out according to the following algorithm:

We install beams for the rough foundation on wooden logs.
We cover the beams with a membrane for vapor barrier.
We lay insulating material under the joists and secure it tightly to the frame.
We overlap the waterproofing and secure it with construction staples using a stapler. We protect the connecting joints with metallized tape.

The wooden base under the floor is treated with antiseptic compounds to prevent possible rotting and destruction of the wood.

Specifics of ceiling insulation

An insulated ceiling reduces heat losses and provides a comfortable indoor microclimate. Basalt wool is used to insulate the surface. Additionally, work is being carried out to vapor barrier the ceiling.

The insulation process is carried out as follows:

A layer of insulating basalt wool is laid between the ceiling beams.
Polyethylene on a foil base is overlapped over the insulation. Thin strips are used for fixing to the beams.
The connecting joints are covered with tape.

If the attic space is not used during the operation of the bathhouse, then the ceiling surface in the dressing room can be covered with flooring. Sawdust, clay or expanded clay chips are suitable as a thermal insulation base.

Subtleties of wall insulation

For internal insulation of the walls of a log dressing room, foil foam or mineral wool is used.

All work on internal wall insulation is carried out in the following sequence:

Installation of membrane vapor barrier on wall structures.
Installation of wooden sheathing from bars with a cross-section of 5 × 5 cm, observing a step of 55 cm. Before installation, all elements of the sheathing are carefully treated with antiseptic compounds.
Mineral wool flooring between the sheathing elements.
Laying polystyrene foam on a foil base and fixing it to the sheathing using staples and a construction stapler.

The next stage is connecting communications and laying electrical wiring in a plastic corrugation.

After completing the insulation work, you can begin interior decoration premises. The traditional interior of the dressing room involves the use of natural materials - wooden lining or tongue and groove boards. Do not forget that the design of the dressing room should be combined with general style design of other bath rooms.

Decorative floor finishing

The next stage in arranging the dressing room is tiling the floor. Moisture-resistant wood species such as larch, oak and cedar are suitable for finishing. Before starting work, all materials are treated with antiseptic impregnation to prevent rotting and destruction of wood fibers.

The work is performed in the following order:

Lathing bars are mounted on the waterproofing layer, observing a step of 40 cm.
The lining is processed fire retardant compounds for wood.
The board is installed on the sheathing using the “tenon and groove” type and secured with self-tapping screws near the walls.
A protective rubber coating is laid on top of the lining.

What to do if you need to paint the floor in the dressing room, which is lined with wooden paneling? In this case, colorless varnishes and stains are used, which protect the coating from premature wear and damage.

Decorative finishing of ceiling and walls

To begin with, the ceiling surface is decorated with wooden lining, observing the technological gaps between the insulating layer and the finishing.

Sheathing is carried out as follows:

A control lathing is installed on the ceiling surface to secure the lining.
Mount the initial element against the front door using a small nail at an angle (45 degrees).
Check the level and install the following elements.
Bars up to 4 cm thick are fixed to the insulating layer.
The lining is installed on the walls, starting from the far corner, using a hidden method.
After installation is completed, the trim and baseboard strips are installed.

Important! The finishing of the dressing room allows for vertical, horizontal or diagonal installation of the lining.

Interior and exterior decoration dressing room should harmoniously complement each other. In the constructed dressing room structure, it is enough to perform external caulking, sanding and treating the wood with special protective compounds.

The final stage of arranging a dressing room in a log bath is the arrangement of furniture and decorative elements. The harmonious interior of the dressing room promotes maximum relaxation and comfortable rest.

The traditional interior for the dressing room is designed in the Russian style, which involves the use of floor or wall hanger, shoe rack or cabinet, mirror, table, benches, sofa, household appliances and dishes.

To get a complete interior, designers recommend using decorative elements made from natural materials - wood, stone and textiles.

Do-it-yourself dressing room for a bath: construction, insulation and finishing

What’s interesting is that there was never a waiting room in a Russian bathhouse: people entered the steam room straight from the cold, and dived into a snowdrift after a good heat, as soon as they opened the door. But now, when the interior and layout of the bathhouse have become much more complex, it is no longer possible to do without this room. After all, it protects the relaxation room, swimming pool and boiler room from excessive steam and high humidity, which always breaks through from under the steam room door. It is the dressing room that serves as the link between all the rooms of the bathhouse and allows you to heat the stove not in the steam room itself. And it is the waiting room, oddly enough, that creates the first impression of the bathhouse - after all, it is the first place people enter. That is why special attention needs to be paid to its arrangement. A beautiful photos The dressing rooms that we have collected for you show that you can approach this matter with ingenuity and soul!

In the dressing room they traditionally undress, put their things, an external heat exchanger and a boiler are installed here, brooms hang here and even a samovar is placed. How does the interior of a regular dressing room differ from a full-fledged rest room? Despite the fact that these two concepts are often confused, the dressing room and the guest room are different rooms.

Basically, they differ in size and area, and secondly, the rest room is always separated, has its own niche, so to speak, and the dressing room is a walk-through room. It always has at least three doors, noticeable engineering systems, sockets and switches are installed. In essence, this is a technical room, which, due to its purpose, is not at all prohibited from being stylish and cozy.

Dressing room interior design styles

Naturally, since the bathhouse is Russian, the Russian style is welcome in it. And it’s not difficult to customize the design of the dressing room to suit it: bundles of bagels, drying fragrant brooms, a huge samovar, a wooden trestle bed or wicker furniture, bast shoes on the walls and carved Russian bears on the doors. It will be difficult to distinguish between the dressing room and the entryway to the hut.

For those for whom the most important thing is comfort, you can forget about conventions and furnish it at home: a lot of fabric and decor, cute curtains on the window, soft sofa and paintings, and, of course, a good built-in hood in the ceiling, so that all this does not rot from moisture in a month.

It is worth noting that the yacht style is the most popular for bath complexes. It is simply ideal for those rooms in which cold metal and soft fabric, plastic structures and warm wood are forced to combine. The most traditional design of dressing rooms with their appliances and checkered curtains! And, since there is such source material, all that remains is to stylize it to complete the image:

If possible, noticeable metal parts and walls should be chromed - this will be the brightest accent of yacht design.
Adding fur to textiles is an important element of this style. Those. fur throws on the sofa, a bear skin on the floor or a stretched out wolf on the wall.
The technical part, like the door to the boiler room or some levers, can and should be highlighted - but in harmonious combination with the interior of the dressing room.
On the floor - a red carpet, which is not particularly afraid of moisture, or a floor made of a good strong board.
Lining is the best fit as a finishing material in this style - oak is perfect.
Both the decor and furniture are only the same as for a yacht – moisture-resistant and durable!

And finally, bright elements of marine decor: shells, fishing nets instead of curtains, themed decorations, a real anchor and beautiful metal inscriptions on all doors. Similar solutions can be seen in some glossy photos of the interior of the dressing room and its detailing - it looks very, very solid. More chic and shine - behind the doors is the captain's cabin!

Finishing materials and stylized furniture

Initially, only benches were placed in the dressing room, and the walls were not decorated with anything - just a log house. Today, even in a miniature bathhouse with a small area, everyone wants to achieve maximum comfort. And all because the functional purpose of the steam room has long ago changed: they no longer come here just to wash and do laundry; on the contrary, a Russian man will spend his last money on building a bathhouse and going there every weekend with a large group of friends. This is stress relief! Therefore, the dressing room no longer serves only as a wardrobe or hallway - if it is impossible to build a full-fledged rest room, comfort can be achieved in it using all available methods.

The most popular finishing for dressing rooms is stone (although the latter can be seen more and more often only in photos than in life). Moreover, now you can use pine lining of the lowest class - there is no such heat in this room, the resin will not flow, and the knots with their resin pockets look like decor. The only thing is that you need to process the paneling here twice, like in a washing room (there is still humidity in the dressing room), and still refuse the birch.

Rattan wicker furniture is also especially good - it doesn’t take up much space, it’s inexpensive, and it’s easy to care for. Only then you will also have to get rid of the humid air modern methods- the same ventilation or a special air dryer.

As for the design of dressing room furniture specifically, the so-called “” is in great demand - benches and a table of rough design, ornate natural patterns, carved forest elements on wood, a mirror and paintings framed by driftwood painted with dark varnish. The style of the goblin in the dressing room gives the impression that you have just entered some forest house and now a fairy tale is about to begin. Cute and quite Russian style.

How to introduce the Russian spirit into a bathhouse?

But the fact that this is still a bathhouse will always be reminded by the enveloping warmth in the dressing room and specific aromas: birch brooms under the ceiling, the smells of pine and fir, aroma oils in jars and beautiful stylized shelves and lamps, with spectacular wood carvings and antique vintage design.

An integral attribute is the smell of freshly brewed herbal tea, with spices, prepared using a special technology. None electric kettles! It's even dangerous. But an old Russian samovar will create its own special atmosphere of comfort: it was not without reason that it was once made so that you could wait an hour for boiling water. After all, this is a whole ceremony, a long process from splitting the splinters to arranging the cups, which takes place in leisurely conversations, jokes and exchange of news. Today people come to the bathhouse to rest and relax after a week of work - there is nowhere to rush, time stops here and there is no place for vanity. The interior should also be conducive to this.

It is important to pay attention in the waiting room: the lighting here is traditionally soft, slightly dimmed and setting you in a relaxed mood. After all, a person, having opened the doors to the bathhouse, must feel that all the fuss, problems and tension will have to be left behind the threshold, thrown into the nearest snowdrift, and here he has come to rest his soul and body (and if he comes from the street into bright light and a cold tiled floor - the sensations will be akin to being in an operating room). They themselves are one of the central elements of design; they need to be selected with soul, and it is better to give preference to noble vintage and unpretentious simplicity than technological metal monsters.

And most importantly, the waiting room should really be warm. There is a fire playing in the stove screen, there is a slight smell of smoke that breaks free with each stack of firewood, and from behind the door in the steam room lively, satisfied voices of vacationers are heard. It’s not without reason that they say – to wash yourself in a bathhouse, it’s like being born again!

So, the construction of the bathhouse is completed, which means we can begin the most interesting part - the interior design, which is advisable to start with the dressing room - the main room for relaxation. There are many options for interior decoration: the design will depend solely on your desires and limitless possibilities irrepressible imagination. Remember, carefully thought-out filling of the room, from which the bathhouse actually begins, will help create ideal conditions for a comfortable pastime. If you’re planning to set up a dressing room, the photo selection presented in this article will help you do it competently and tastefully.

Dressing up the dressing room

Before you start directly thinking through the interior, you should understand the functions of the room. Its main purpose is to prevent cold air from entering the steam room and provide cozy conditions for relaxation.
That is why the design of the dressing room requires detailed study; many nuances must be taken into account: where to hang things, where to store towels, what to drink tea from.

The beauty of design is in simplicity; it is not customary to clutter the dressing room with unnecessary furnishings

When thinking about the problem of arranging a dressing room, you can, of course, shift the burden of responsibility to specialists, but it is much more interesting, following the recommendations of professionals, to create an original dressing room with your own hands.

Regarding fashion trends, you will notice that the “a la Russe” style is more relevant than ever, therefore, if you want to create something unique, but taking into account modern trends, this option is a win-win. Sturdy furniture, floral decor, small lamps, a pot-bellied samovar, hand-made shelves... Why not a piece of paradise, where everything is filled with harmony and peace?

Style is created by details: according to tradition, baths are lined with wood and furnished with stable, simple wooden furniture

No less popular classic interior dressing room, where wood carving, unusual furniture, hand-made items, paintings, etc. are appropriate. everything that can best emphasize the luxury of the environment.

Well, if neither the first nor the second option matches your worldview, you can try the high-tech style. A fireplace with a remote firebox, decorated with glass, decorations made of stone and metal, stylish bedside tables and a set of simple forms will look just great.

Below are options for creating a unique atmosphere in the dressing room, conducive to long tea parties or intimate conversations in the company of best friends.

The interior of the dressing rooms in the photo

The procedure for arranging the dressing room

First you need to think through a work plan, visualize what you want to create. This will not only help you achieve your goal with maximum accuracy, but will also save a lot of time.

Selection of finishing material

Tree - best material for interior decoration, combining environmental friendliness and safety. These indicators are extremely important when arranging a bathhouse.

It is important!
Use wood with low thermal conductivity for finishing. Inspect the wood carefully: there should be no resin stains or knots on the bars.

The following types of wood are suitable for finishing:

When heated, linden will give a bouquet of aromatic essential oils that are not only pleasant, but also beneficial for the body. An important advantage is that linden does not darken and retains its original appearance for a long time.
Wood exotic wood Abashi does not heat up, which makes it an indispensable assistant in the matter of decoration.
Cedar, despite its wonderful aroma, must be used with caution - the resin can release enzymes that negatively affect human well-being.

The best option is a combination of coniferous and deciduous wood varieties, which will create exclusive interior.

Features of the room

The dressing room usually occupies a small area, so it is important to consider several points. The room must be functional, because... It is intended not only for storing things and bath accessories, but also for a pleasant stay.

Based on this, zoning of the space should be provided: there should be a place for a dressing room, brooms and other bath attributes, a dining table, an outlet for the stove, which will help to heat the steam room without opening the door again.

It is important!
Try not to clutter the dressing room with unnecessary furniture and unnecessary items: it should be spacious here.

The room should be spacious: nothing should interfere with movement and rest

On one side of the wall you can place a table and benches, and on the other - a washbasin, a small cabinet with a mirror and a hanger.

The main pieces of furniture that you can’t do without are hangers, a table and chairs. You can place a sofa and armchairs made of leatherette or water-repellent fabric. Also, don’t forget about a small chest of drawers or a shelf for things where you can put clothes, towels, and tablecloths.

The choice of furniture leaves room for imagination

There are very often bathhouses on the plots of country houses. The interior is no less important than the design project of the house itself. Typically, a bathhouse consists of several adjacent rooms - a steam room, a shower, a relaxation room and a dressing room. In order for the interior of all these rooms to look harmonious, interesting and stylish, it is worth thinking through their design project in advance.

Design requirements

When decorating a bathhouse, special attention should be paid not only to the aesthetics of certain solutions, but also to their functionality. First of all, the bathhouse should be a cozy and comfortable place to relax.

When designing a design, you need to adhere to certain requirements.

No need to install in a steam room metal constructions, which can easily get burned. Decor with metal elements in the dressing room or in the rest room is acceptable, but often such a design can be dissonant with the decoration of the steam room.

Make sure that the materials used are hypoallergenic and do not release toxins in high temperatures. It is worth giving up plastic products.
It would be good if the finish was durable enough and resistant to temperature changes and high humidity.
It is worth taking care of the ease of cleaning in the bathhouse. It is important that the floor and walls are easy to clean.
Since wood that is not varnished is mainly used in the decoration of bathhouses, it is worth making sure that all boards and beams are thoroughly sanded so that they do not leave splinters.

Pay attention to the size and layout of your bathhouse. If you are setting up a room for several people, you should not have any problems. However, if you like to receive guests, and the size of the bathhouse is relatively small, you should consider maximum savings space. Avoid unnecessary accessories excess furniture, sharp corners and protruding decorative elements, as well as narrow passages.
The bathhouse floor should not be slippery. The best option would be to finish it in wood. Laying with matte ceramic tiles or mosaics is also acceptable. From a safety point of view, floors made of smooth ceramic tiles, marbled or varnished will be unacceptable.
The aesthetics of the bathhouse finishing are also very important. If you are thinking about the design of a small bathhouse in a country house or in a private house, you should avoid the abundance of small details and choose simple shapes. If you have a spacious room, you can take care of decorative elements and accessories.

Mostly for the design of a bathhouse, wooden beams or boards are chosen. This material is absolutely environmentally friendly, and depending on the type of wood, it can also have a pleasant aroma. For showers and rest rooms, wood is also often combined with masonry, marble or ceramic tiles. Similar design solutions can look very interesting.

Despite the fact that the traditional interior of a bathhouse is quite simple, it is quite possible to implement modern ones in a design project. unusual ideas. For example, you can combine dark and light wood - such solutions look very stylish and unusual. You can also make carved decor or design benches made of wood with an abstract, streamlined shape.

Materials and finishing features

Materials for arranging a bathhouse should be chosen taking into account all the nuances - increased temperature, humidity, the need to do wet cleaning. It is important that the finishing of your bathhouse is as natural and environmentally friendly as possible, does not burn and is not slippery.

However, since any bathhouse consists of several rooms, the nuances of finishing in the dressing room, steam room, washing room and rest room can vary significantly. For example, the wash room is often characterized by a ceramic finish, while the steam room and dressing room are dominated by wood and stone. When arranging a relaxation room, you can show your imagination as much as possible, since this space is no different from any room in a house or apartment.

Waiting room

The dressing room is a space through which you can go to other rooms. People usually undress in the dressing room, so you need to place here at least a small bench, lockers or hooks for clothes and shelves for towels. There are no special requirements for the finishing of the dressing room. However, many people prefer to decorate the entire bathhouse in approximately the same style, so wood, stone and ceramics remain the most common materials for this.

Let's consider the main options for finishing dressing rooms with different sizes and layout.

The simplest and most popular option is to decorate the entire room with boards or beams. For a small dressing room, it is recommended to choose light shades of wood. The nuances of finishing will depend on the style you want to adhere to: you can make smooth walls from large wooden elements or make masonry with beams. It’s good if in a small room the furniture also matches the color of the finish, so that the dressing room visually appears more spacious. If you have a spacious room, you can experiment - for example, modern design projects often use stylish dark wood boards or decorative elements with interesting carvings.

Often the dressing room is decorated to look like a brick or masonry. Now exists various tiles imitating stone. You can choose light ones beige shades for a small room or terracotta and brown options that will diversify the interior of a spacious dressing room. In addition, most decorative stonework options combine well with wood, so you can create a combination of interesting finishes.

Sometimes the dressing room is decorated with ceramic tiles. It can be used to lay out the floor or walls. WITH wooden elements Matte tiles can also look great. In addition, you can choose tiles of different shades and sizes, creating stylish patterns from them. Make sure that the tiles are not slippery and avoid deep grooves where dirt can accumulate.

Restroom

The rest room can be decorated at your discretion. It is worth considering that wallpaper is used quite rarely - moisture from the steam room will inevitably penetrate into the rest room, which over time will lead to wear and tear of the wallpaper.

Painting walls is not very popular in baths, however, in the rest room it is quite possible to decorate the walls in a similar way. Walls are rarely painted, since such an interior may not fit into the overall design concept. Moreover, if you combine painting with wooden finishing elements, such a relaxation room in terms of design style will be quite compatible with a steam room.

Often the rest room is also completely decorated with wood. Typically, this finishing option goes well with a steam room. Wooden beams on the walls help create a unique and special atmosphere in the bathhouse, enjoy the quality of environmentally friendly materials and feel complete unity with nature.

Sometimes one or more walls made of natural brick are left in the recreation room, sometimes the walls are decorated with tiles that imitate stonework. Such options can be very diverse in their texture and color. In addition, this is a stylish and modern solution that will look harmonious in combination with wooden decor.

The floor in the rest room is usually made of wood. If you lay it out with tiles, it will be cold to walk barefoot, and linoleum and laminate flooring can be damaged in high humidity conditions. Carpets Due to humidity, it is also not customary to use. Moreover, if you have a spacious recreation room in which you can allocate a separate kitchen area, in this part of the room you can lay out the floor with tiles that will be combined with wood.

Ceiling finishing options are not very diverse. If you lay out the entire bathhouse with the same wooden boards, it would be appropriate to decorate the ceiling with exactly the same elements. If you do combined options finishing, paint the walls or lay them out with stone; ordinary whitewash is suitable for finishing the ceiling.

Shower

The decor of a shower room in a bathhouse may resemble the decoration of a bathroom in a house or apartment.

The simplest option is to decorate the entire room with ceramic tiles. For a small shower you should use monochromatic options, but in a spacious room you can safely try combining two or three colors. Choose matte tiles in subdued colors. Bright colors should only be used as small accents, otherwise they can cause irritation.

Wooden shower decor is a little less practical, since wood can deteriorate from direct exposure to water. At the same time, it is quite possible to combine a similar design with tiles - for example, lay the walls near the shower stall and floors with ceramic coating, and make the opposite wall near the mirror wooden.

Stone finishing can also be successful for a shower stall. Such a simple and stylish design will go perfectly with the design of the entire bath in a traditional style. Mostly for such decor they choose all kinds of tiles with a special texture that resembles stone.

Often shower rooms are decorated with marble mosaics, which are now popular. You can choose finished products on a grid - they combine small squares of two or three colors that are similar in tone. Such a solution will make the interior stylish, modern and unobtrusive. You can also lay out more complex patterns and even entire mosaic paintings on the floor or walls, but it is worth considering that a floor with such a finish becomes slippery when wet.

Steam room

The steam room is traditionally decorated with wood. This material best meets safety requirements, and wood, when properly processed, is resistant to changes in temperature and humidity. The design can be almost anything: you can combine dark, light and mahogany wood, and also give the boards any desired shape. Among other things, many types of wood also have an aromatherapy effect. This will create the necessary atmosphere in the steam room and truly relax.

Linden is considered to be one of the most popular types of wood for finishing a steam room. This is inexpensive wood with a pleasant light shade. This wood heats up quickly and cools down slowly. When heated, the boards release a subtle sweet aroma. It must be borne in mind that the aroma will become weaker over the years. Also, linden tends to darken slightly over time, so that after a few years, unusual light boards will no longer stand out so brightly.

Aspen is another species that is often used for trim. Its price is low, especially in the northern regions of Russia. This tree does not have a pronounced odor, but has bactericidal properties. Moreover, it is very durable material from which lovers modern design can cut thin and elegant stable structures.

Alder has a pleasant golden color. It is easy to work with due to the fact that it is a fairly soft wood. This material is ideal for traditional steam room finishing options. Alder has good heat capacity, a pleasant texture to the touch and a light woody aroma.

Relatively recently, a new trend in the design of steam rooms has appeared - wood trim, called abash. This is a rather rare and expensive breed that came to us from Africa. Its advantages include the fact that it does not darken over time. In addition, when high temperatures such wood practically does not heat up - its temperature will remain as close as possible to the temperature of the human body, unlike other popular species for finishing.

Accessories and lighting

Bathroom accessories are also important. With their help, you can place bright accents and interestingly diversify the interior. At the same time, the design of the steam room itself is often very laconic. Since this room should be as convenient as possible for practical purposes, it should not be overloaded with details. However, you can choose interesting and useful wooden products: buckets, buckets, ladles, headrests and hangers. You may also need brooms, aromatic oils and a thermometer to monitor the temperature in the room.

The dressing room can be decorated as you wish. Paintings, a small rug, a miniature table, a clock and coat hooks can look organic there. All these small details will make even the simplest bathhouse interior stylish and unique.

The break room usually has windows, so you will need curtains or blinds. Very popular wooden options from bamboo. It is also worth choosing kitchen utensils of your choice; these can be ceramic or wooden utensils. The walls can be decorated with paintings, tapestries, animal skins or stuffed animals. Ottomans and cabinets made of genuine leather can also look good.

If you are setting up a shower room, you can purchase a stylish rug, a soap dish, drawers for storing cosmetics and a shower curtain. For a small shower, it is better to use a minimum number of accessories. If you have a spacious room, you can arrange decorative vases

As for lighting, for a bathhouse they usually choose lamps built into the ceiling, which will be as inconspicuous as possible. Also, sometimes additional lamps are hung on the walls. Such lighting options are typical for a waiting room, steam room and shower room. Flashy chandeliers are practically not used; they may only be appropriate in a recreation room decorated in a modern style.

A cozy bathhouse with a warm dressing room - perfect solution for a summer cottage or suburban area in our region. Such a sauna house is suitable for use all year round, because the thick log perfectly retains the temperature and prevents the premises from cooling down quickly. The simple but thoughtful layout of the bathhouse is attractive to clients who value practicality and comfort.

The Zhar-Banya company specializes in the construction of sauna houses from logs “into a bowl” and “into a paw”.

Compact or spacious, simple or equipped with additions, projects receive well-deserved attention from residents of Kazan and Naberezhnye Chelny.

50 photo ideas for finishing a bathhouse inside: choosing a style and type of wood

Such baths are being built in short time(5-10 days, depending on the complexity of the project) without loss of quality.

The Zhar-Banya company offers its potential clients transparent cooperation with the conclusion of an agreement and a detailed estimate, which eliminates the possibility of abuse or deception.

What a bathhouse with a warm dressing room will look like: photos of finished projects can be found on the company’s website in the “our work” section.

Experts advise you to familiarize yourself with the appearance of the built baths in order to clearly imagine which project is suitable for a particular site.

Layout of bathhouses with a warm waiting room

All projects of bathhouses with a warm waiting room presented on the site are practical and comfortable.

The traditional division of a log house into two or three parts is considered the most rational from the point of view of subsequent operation:

Small baths, consisting of a dressing room and a steam room, are well suited for a small family.
No more than 3 people can steam in such a log house at the same time.
Spacious houses (dressing room, washing room and separate steam room) are designed for larger groups (3-6 people).

For those who want to build one house on the site, in which they can both take a steam bath and stay overnight in summer time, it is worth paying attention to the “log baths with an attic”.

The principle of integrated construction is especially convenient for those who cannot sacrifice square meters of land on the site.

Bathhouse 4 by 6 from a log house / “IN THE BOWL”

Hand-chopped on a turnkey basis.

More detailsOrder

Bathhouse 2.5 by 4.5 made of logs

Hand-chopped on a turnkey basis.

More detailsOrder

Bathhouse 2.5 by 3.5 made of logs

Hand-chopped on a turnkey basis.

More detailsOrder

Wardrobe design: tips and photos

The dream of every summer resident and private home owner is to build a swimming pool on their property. Bathtubs can vary in shape, material, size and different parameters, but they always go together - without a bathroom there is no bathroom.

The theater starts from the coat rack and the bath starts from the lobby.

They don't just take off and leave their outfit, but also relax, hover, drink tea or cold yeast on a carved wooden table with comfortable benches.

Why do you need a wardrobe?

The waiting room is built in such a way that moisture from the steam room does not penetrate into it, and clothes remain dry.

Closet rooms should be lit, not cold air. so the window becomes small. Exterior doors should also be low to maximize heat gain. Regular entrance doors have a height of 2 meters, and entrance doors rarely exceed 160-170 cm and a width of 60-70 cm.

Entrance doors in the lobby are best on the south side.

This will protect from the cold north wind, and in winter snow snow will be reduced.

The door to the steam room is even lower. This door should not open in the couples room, but in the reception area. This stops steam from penetrating and keeps the air in the cabinet dry.

The technical purpose of the wardrobe is to create an obstacle to the entry of cold air into the steam room. In the rooms of the room you can relax to enjoy the water.

Wardrobe closet room

The waiting room can be built in any size, usually 2x3 meters.

In such a small room you can put a table with a bench and a hanger. The choice of interior design options is quite high.

Typically, saunas built from logs do not require additional lighting. The main task in this case is good heating and processing of impregnated wood. protect the tree from negative effects.

If the building still needs interior finishing, there are many options.

It should be noted that due to increased humidity, the choice of materials for internal treatment must be seriously considered.

Materials suitable for decorating reception walls.

Polyvinyl chloride This inexpensive and practical material It is easy to assemble and even wooden walls do not require a frame.
The choice of colors is wide, allowing you to design in any style. But plastic cannot be used on the wall between the wardrobe and the thermostat. because it can become deformed and release harmful substances when heated.
Rubber color. A novel that is quickly taking over the market. Apply this color to any surface. The color is waterproof and will not crack or burst.
The block house, which imitates log walls, fits completely into the lobby.
but it must be carefully installed, especially at corners, at connection points from windows, doors, near exits.
Coating. The panel liner is mounted vertically so that moisture is not retained. Its thickness should not be less than 16 mm. On flat wooden surfaces The slab can be laid without containers.

Which tree is best to use for dressing?

Oak. It meets all the requirements of being durable, long lasting and durable.
It has antiseptic properties and has a positive effect on blood vessels and pressure.
African abash is characterized by low heat capacity, hardness, resistance to deformation and good properties.
Canadian cedar is resistant to high humidity, fire-resistant, and does not deform due to temperature changes.
When heated, antibacterial essential oils are released.
Lime has high resistance to texture and color, does not emit tilt when it heats up, absorbs sounds and water, gives a pleasant relaxing smell.
Aspen is not sensitive to moisture, it does not deform.
He may lose his appearance over time. therefore it must be processed. Aroma Aspen calms down.
Larch is strong, making it difficult to process. Worthy of withstanding the high performance characteristics of durable. It lowers blood pressure and strengthens the immune system.
Boron is ideal for closing a wardrobe. It is resistant to decay and fungus, will not decompose or deform, and is durable.
Over time, the pine develops a pleasant reddish hue. It has bactericidal properties and improves immunity.

The floor can be made of wood or ceramic tiles with an anti-slip coating.

Designer wardrobe versions

Wardrobe design

The main quality of a wardrobe is comfort.

When arriving at the steam bath, vacationers should not think about where to go, where to do everything so that you do not absorb and pollute them. Therefore, appropriate benches, hangers and shelves must be provided.

In addition, it is advisable to equip the lobby, so there is a place for meeting with friends and relaxing after the steam room.

The interior of the dressing room should be comfortable and functional.

Russian style

The most traditional bath style. The space can simply be transformed with a variety of traditional touches: aromatic oak and birch butterflies, clusters of dried herbs, decorative grubs, a large homemade glitter side and heaps of steering wheels. Also help create the atmosphere of knitted chairs, carved wooden benches and tables, wooden carvings, unusual and mountain ash, dishes and towels with decorations.

You can take inspiration from the interior of traditional Russian villages.

Upholstered furniture and textiles - cute curtains, tablecloths, napkins and towels - will be used to bring elements of home comfort into the wardrobe, just like in my grandmother's house. To keep excess moisture at bay, anything dear to the heart can help create a quality built-in hood.

Match style

Quite a popular solution. Furniture of brutal extermination, often imitating small arms and flames, natural and floral designs, carved animals and plants on wood.

The decoration is complemented by a mirror in a frame made of hanging wood, painted with dark varnish. Hang brooms and bouquets of dried herbs. This waiting room gives the impression of a fairytale forest house. feeling close to nature.

You can appreciate the charm of this style in the photo.

Yacht style

This style is also very popular in modern baths. This is great for rooms that combine wood, metal and plastic. If these elements are present in your wardrobe, you only need to style them. To become a real lobby captain, you need:

chrome, visible metal parts and surfaces.
Pipes that are once hidden may become bright accent for yacht design;
Fur is another important attribute. The fur or skin of animals on the wall or ground perfectly complements the interior;
doors to the boiler room, various control levers and other elements of technical work can be highlighted and stylized;
on the floor of an excellent strong panel you will see a lot of red carpet material that is resistant to moisture;
To complete the walls, a station wagon is ideal; this style benefits from an oak look;
Decorative items and furniture should be selected for their moisture content and durability.

Great examples of the sailing mode you can see in the photo.

Classic style

In the bathroom you can feel not only yachts, but also nobles and nobles.

To do this, you need to choose a classic shape. Furniture with elegant shapes, curved legs, skillful carvings, gilding, interesting stylish shelves design, curved hangers for antiques. Textiles will help create the right atmosphere - a luxurious tablecloth, stylish furniture upholstery.

furniture

What furniture do you need in your bathroom?

Bathroom storage

Without benches or hangers, it's definitely not manageable, it's the bare minimum required. But this does not mean that there is nothing else in the wardrobe. The absolute redundancy would be a small box or booklet. where you can put clean clothes, towels, tablecloths and other necessary things. Of course, if there is an option, then in the lobby you can place not only a chair and benches for relaxation, but also a refrigerator or even a TV.

If you want to put a sofa in a coffee shop, then choose upholstered furniture leather or leather, and high humidity will quickly render the textiles useless.

If you don't want to sit in a steam room on your skin, then you get a blanket of natural products. All textiles in the wardrobe must be quickly and dry. For long-term use of your lobby furniture and decorative items, you must ensure that vapor barriers and insulation are carried out in accordance with all regulations.

Choose your favorite version or make your own. Each cabinet looks different and has an impression of the character of the craftsman. If you want to see interesting ideas, you can select your photos.

Based on website materials: http://bane.guru

Sections