How to make a small round cornice. How to make a curtain rod with your own hands from scrap materials? The main types of curtain rods

home

Signaling

DIY cornice is a great way to show Creative skills and get an exclusive item to decorate your room. On sale you can find many of the most different models fastenings for curtains, but an item created with your own hands is always beyond competition. In addition, such a cornice will be made specifically for a specific room, taking into account all its features, which will allow it to fit perfectly into the interior. How to make one useful thing? Let's figure it out.

There are many modifications of cornices. We'll consider the simplest in embodiment options.

Design with decorative strip

Making such a cornice with your own hands is quite simple. You need to take the old string structure as a basis. In addition, we will need steel corners, self-adhesive film, laminated chipboard, paint, circular saw, grinder, drill, screwdriver, self-tapping screws. Let's get started:

We start by making a decorative strip. To do this, from a sheet of chipboard circular saw cut out a strip of the required length, about 15 cm wide.
We decorate the detail. You can paint it in suitable color or paste over self-adhesive film. The coating must be applied in strict accordance with the instructions on its packaging. To ensure that there are no air bubbles left on the surface, smooth it with a rubber roller. We design the corners of the plank as follows: carefully cut the film from the front part of the crossbar along the line of continuation of the corner. Then we wrap the covering on reverse side strips and make a cut along the corner line from this side. Then we glue the narrow end of the film. We glue the remaining corners in the same way.
We are preparing to attach the cornice to the wall. It is assumed that the curtains will be fixed to regular string, suspended from the ceiling. Therefore, the decorative strip we prepared will also be attached to the ceiling. We make two corners from strips of sheet steel. These will be the fasteners. The width of the product should be 2 cm, length – 10 cm. Drill holes on the plates. We fix the corners to the bar with screws.
We carry out installation curtain rods. We mark a place on the ceiling for fasteners. We install the screws and put the corners on them, move the parts along the grooves, achieving the desired position. We fix the structure with self-tapping screws.

Cornice made of metal pipes

Simple, but beautiful design – round cornice for curtains, making such a product with your own hands is quite simple. Let's consider an option made from metal elements. For work we will need: metal pipes and rods, plugs, clamps, hinges, an angle grinder, paint of the desired color. Let's start making the cornice:

Preparing metal parts. We cut the pipes to the required length. We will need two parts. The first is 25 mm in diameter, the second is 19 mm.
We make holders for the crossbar. To do this, we cut a 12-mm rod into three pieces 25 cm long. We make grooves for fastening on each part. The first is cut at a distance of 1.5 cm from the edge of the rod. It is designed for a 25mm diameter structure, so it must have an appropriate width. At a distance of about 8 cm from the first groove, we cut out the second. It will be smaller because it is designed for a pipe with a diameter of 19 cm. Grinding the surface holders with sandpaper, prime them and paint them. You can apply a layer of varnish on top.
We make plugs. They are made from round wooden handles or removed from an old cornice. In the first case, we purchase round parts and use a sharp knife to cut holes in them for metal rods.
We install the structure. We mark the mounting locations on the wall, and then drill holes for the holders. We fix the rods in these holes, if they are not held very tightly, fix them using putty. We lay the pipes on the holders and insert the plugs.

How to make a curtain rod with your own hands using metal pipes is now clear. However, there is an even simpler option - a design made of plastic pipe. To make it you will need plastic parts and special fastenings for plastic pipes. The latter are fixed to the wall and hold perfectly improvised cornice.

String system

Make a string DIY cornice simple enough. We carry out the work in the following sequence:

We make wall mounts. We take a metal sheet 2 mm thick and use a grinder to cut out two 60x240 strips from it. We sand the edges of the parts. Then we bend one edge at a right angle in one direction, the second in the other. The length of the fragment facing the wall should be about 70 mm, the section facing the eaves should be 35 mm. First we plan fold lines, then clamp the part in a vice and bend it with a heavy hammer. We drill holes for the screws. On the long platform we make three holes for the string, on the short platform - four for fasteners.
We install the cornice. We mark the places for fastening the structure on the wall, drill holes, and install fasteners. We take a thin wire or fishing line, thread it through the prepared holes and pull it tight. At the ends of the fishing line or wire we make small loops and thread sticks through them, which will fix tensioned structure.

A self-made string cornice may not seem aesthetically pleasing enough. Then the structure can be covered with a decorative strip. If you wish, you can make several planks of different designs and change them periodically.

Homemade design for Japanese curtains

Japanese curtains, consisting of several panels, resemble vertical blinds. Let's consider the option when you need to secure four such panels. We will need to purchase 4 plastic slats about 25-30 cm wide, a two-row plastic curtain rod of the required length, narrow curtain tape, Velcro tape and transparent Moment glue. Let's get started:

We cut eight pieces of the required length from the rail. We immediately put four aside. We will use them to make weights in bottom part panels
On the front part of each of the remaining four elements we glue a rigid base of Velcro tape, and on the back - curtain tape with the thread removed for assembly. To prevent the braid cuts from falling off, pre-melt them on fire.
We insert the guides into the cornice, two elements per rail. We install the structure in place.
We prepare the panels by attaching the soft part of the Velcro tape to the top of the product and attaching weights at the bottom. We fix the panels on the guides. Cornice for Japanese curtains ready for use with your own hands.

How to make a product special

With the help of wallpaper and paint you can achieve a variety of different decorative effects and make the most conventional design original and beautiful. Such a hand-made cornice will harmonize perfectly with the decoration of the room. There can be many decor options. The simplest is to paint the product in the color of the walls or curtains. Interesting color effects can be obtained when applying paint with a rag swab or sponge. You can also use special adhesive paints of several colors.

The cornice can be decorated with stripes or left plain and individual elements painted: fleurons, brackets or rings. An original product will be obtained by covering the bar with wallpaper that harmonizes with the curtains. Drawing enthusiasts can cover the design hand painted . It is very important to choose the right paints. Vinyl or silk emulsions are suitable for wooden cornices, water-based compositions. For metal rods, it is best to use enamel, spray or special metal paint. The finished decor is varnished.

Even a novice home craftsman can make a cornice with his own hands. Accuracy and patience will help you make a good, practical thing. And if you show your imagination and decorate your product in an original way, you will get an exclusive masterpiece. You can come up with the design of the cornice yourself, but it’s better to look interesting ideas decor and choose the best. Lots of interesting design solutions collected on the WESTWING website, it’s definitely worth a look. Develop original cornice project and bring your idea to life. Your home should be the most beautiful, make it that way!

Do you want to make a curtain rod with your own hands? This perfect solution! After all, sometimes a purchased cornice is not cheap at all, but you really want to save a little. Despite the fact that such a cornice is not always able to meet expectations. Perhaps you don't like its boring design, color and fasteners, or would you just like to add something? Agree, this happens quite often. Therefore, we advise you to make a cornice yourself at home. Believe me, there is nothing complicated about this. To do this, you need to stock up on the necessary equipment for the cornice and simply assemble this design together. Or you can make a cornice almost from scratch. In this article we will tell you how from ordinary PVC pipes You can quickly and easily assemble a functional cornice, like sewing curtains with your own hands, without spending a lot of time and money. Stay with us and we will tell you everything in detail.

The main types of curtain rods

In order to understand how to make a curtain rod with your own hands, you need to familiarize yourself with the main types of this design.

Cornices are classified according to the following criteria:

Type.
Material of manufacture.
Place of installation of the structure.
Number of rows.

Installation location

Cornices can be located both on the wall and on the ceiling. Previously, they used to mount the cornice on the wall, but now people prefer to mount the structure on the ceiling. This choice is due to the fact that wall curtain rods can break off under the weight of a heavy curtain, while ceiling curtain rods are held firmly to the ceiling with special fasteners.

Rowing

You can also divide the curtain rods according to the number of rows needed for the curtains. Multilayer structures are popular today. They allow you to hang, for example, curtains and tulle on one solid cornice.

Design device:

String cornice. The most common option. In this design, the curtains move along tension strings, which are hidden by a decorative strip.
Tubular cornice. It has been used for a very long time and has been familiar to us since childhood. The only downside is that over time, the surface of the curtain rod may lose its smoothness, as a result of which the rings that hold the curtain begin to move poorly.
Baguette cornice. Most modern material from all the above cornices. The design consists of a profile with grooves, which, as a rule, is hung on the ceiling, sometimes on the wall.

Materials

Cornices can be made from the following material:

Metal.
Plastic.
Tree.
Drywall.

As you can see, the variety of cornices is very large and there is, so to speak, plenty to choose from. Next, we will talk in detail about each curtain rod, its advantages and disadvantages, and how to make curtains for curtains with your own hands.

Metal curtain rod

This is a fairly simple execution of such a complex design. Metal curtain rods are used, as a rule, for heavy curtains and multi-row compositions. Everything is not as complicated as it seems at first glance. A metal cornice is very expensive, so don’t rush into purchasing it. You can make this design yourself at home:

To do this, you need to buy a metal profile, hooks and fix the cornice to the ceiling.

Important! Do not forget that the number of stripes in the profile must match the number of intended curtains.

A tubular cornice is also made of metal. This requires aluminum or stainless pipe and mounting brackets. You can take a metal rod and put caps around the edges using wooden door handles.

Polyurethane cornice

Plastic curtain rods are well suited for lightweight curtains, as this material is not able to withstand heavy loads. The most common option is the tubular cornice. Making a curtain rod for your dacha with your own hands is quite simple. And to find materials for its manufacture - especially, for example, buy it at a plumbing store.

Important! Polyurethane cornice is a material that has positive characteristics, unlike all other polymers:

Polyurethane, like any plastic, is not at all afraid of water, so it can be safely used, for example, in a bathroom or toilet.

The material is quite light, durable and resistant to high temperatures.

Such characteristics allow the polyurethane curtain rod to be hung in almost all conditions and adhered to almost all substrates, including plasterboard structures.

To install such a curtain rod, you only need a polyurethane profile and curtain hooks. The excellent flexibility of the material allows you to give it any shape you like.

Wooden curtain rod

Gaining popularity decorative elements interior with aging effect. Even new objects are converted into old ones using the technique of surface abrasion and decoupage. Curtain rods, in this case, are no exception, on the contrary. Wood is used to create different planks for one type of structure.

It is very easy to make a cornice from wood, adding various decorative elements at your discretion:

From a sheet of chipboard we cut out a strip of the required length and width. After this, we paint or cover with self-adhesive film of the desired color.
If it so happens that it is impossible to cut a strip of the required length from a sheet of chipboard, it can be additionally attached using special glue or furniture staples.
We attach the plank to the ceiling using metal corners. For this design, as a rule, single-row or multi-row strings are used.

Important! You can use another option for making such a cornice. To do this, you need to take a suitable wooden stick and walk on it sandpaper, sand and insert into brackets, which you can also make yourself.

Drywall curtain rod

Such cornices are very popular for creating modern interior. But for production you need necessary materials and tools, some construction experience.

The main features of a cornice made of this material are listed below:

This design has the form of a box into which you can connect additional lighting using spotlights.
Most often, a niche is made for a stretch or suspended ceiling.
The main purpose of a plasterboard cornice is to hide the cornice and the top of the curtains from prying eyes. That is why it is made along the width of the window opening or along the entire wall area.

Important! The installation of such a niche for the cornice should be carried out precisely at the stage of manufacturing the ceiling, since it is much more convenient than installing it after all the work has been completed.

As you can see, there are a lot of options for making curtain rods. You just need to show your imagination, make a little effort, and a stylish piece of furniture will highlight the impeccable taste of the owner.

How to make a curtain rod from a plastic pipe with your own hands?

For the kitchen or utility rooms You can make your own cornice using a long-forgotten plastic pipe. This cornice is well suited for curtains with rings or loops, also created with your own hands. To manufacture it, you need several pipes (depending on the required length), special holders and materials for fastening this structure.

Important! Curtains for plastic curtain rods can be sewn in an hourglass pattern. To do this, we fix the cornices on the upper and lower sashes, stretch the fabric and tighten it in the center.

Below we will look step by step at how to make a cornice for curtains and a plastic pipe:

First you need to find a pipe of the required length to cover a window or doorway, several PVC corners, a couple of pipe sections and metal holders.
Next, you need to measure the width of the window opening.
You need to add approximately 20 cm to the obtained measurements, we get the length of our future cornice.
Now we are gradually starting to assemble the structure. First, we put the corners on the edges of the plastic pipe.
We insert small pieces, approximately 15 cm, into the corner to leave a gap between the wall and the cornice.
Afterwards we fix it metal clamps to the ends of short tubes.
We paint the cornice, for example, gold, silver or another color.
After the paint has completely dried, we attach the finished cornice to the wall.

That's it, job done! We received a full-fledged curtain rod with our own hands. It is done quickly, and most importantly, your forgotten plastic pipes will be used in your interior. Agree, this is a very profitable solution!

Sewing curtains and curtains with your own hands

Curtains are a type of curtain for which translucent or dense lightweight fabric is used. Sometimes curtains are those structures on which curtains are attached.

Important! Both options are correct. The designation of the word, translated from Dutch, means the curtain and the structure on which it is attached.

The following fabrics are used for sewing curtains:

Tulle.
Veil.
Organza.
Muslin.
Chiffon.

Today you can easily buy ready-made curtains different types and models. Their selection is quite large. We will tell you how to sew curtains and decorate them according to your refined taste and preferences. Sometimes it's not for the window standard size It is very difficult to find a suitable curtain, but sewing one is much more economical and enjoyable.

General principles for sewing curtains

In order to sew curtains, it is not necessary to have great experience in cutting and sewing. The main thing is to take correct measurements, prepare the fabric and necessary tools. Believe me, everything will go like clockwork, you just have to start!

How to take measurements?

First you need to measure the length of the cornice.
Afterwards, measure the distance between the cornice and the floor.

Important! If you need long enough curtains, then add another 10-20 cm to the length.

If you need to sew curtains with allowances for folds, then add ⅓ of the total length to the length of the cornice.
If you want a curtain with a lush drapery, then you need a length of fabric equal to three lengths of the cornice in total.

How to choose the right material for curtains?

In order to choose fabric for sewing curtains, it is necessary to take into account all cardinal directions. Eg:

In a room located on the south side, it is better to use thicker and opaque fabric as curtains.
If the windows face the shady side, then you can opt for a thinner and lighter fabric.

Important! Do not forget that fabrics such as chiffon and voile, when sewing on sewing machine can fold into an accordion. Therefore, the stitching must be done slowly and with extreme caution. For such work, it is better to use more gentle modern machines that have the function of sewing on thin fabric.

Step-by-step instructions on how to sew curtains

Of course, in a shaded room, a curtain made of thick fabric will make the room dark and gloomy. But at the same time, such an ordinary curtain will add sophistication to the interior, so the solution to this problem is a DIY curtain for curtains. It can be sewn multi-layered and finally decorated with a lambrequin. Your room will become beautiful and elegant, and the pleasant rays of the sun will delight you every day.

Stage 1 – purchasing and cutting fabric

Let's get acquainted with the calculations for constructing a pattern for curtains. For example, we will take a standard size canvas of 1.2-2.2 meters:

In order to calculate the amount of fabric, you need to use the formula: divide the width of the curtains by the width of the fabric, we get the number of stripes.
Next, we multiply the resulting number by the length of the curtains, including seam allowances. For example, the width of the curtain is 9 meters, its length is 3 meters. A roll of fabric is, say, 1.5 meters. We get: 9/1, 5.6 strips of fabric come out.
Now we multiply the number of stripes by the length of our curtain: 6 multiplied by 3 and we get 18 meters. Thus, in order to sew a curtain measuring 9 by 3 meters, you need to take 18 meters of fabric 1.5 meters wide.

Important! This method can be used for one curtain across the entire width of the window, or for several curtains. For curtains made of two halves, you need to sew only one half of the cut fabric. To ensure that the cut is fairly even, use chalk or a piece of soap.

Stage 2 – sewing curtains

We will introduce you to step by step instructions for sewing curtains with your own hands:

First, we sew the rectangles of fabric together so that we eventually create a fabric of the required size.
To make the seams less noticeable, we make an indent from the edge of the fabric and process each seam with an overlocker.
Fold each edge, except the bottom one, approximately 1-1.5 cm.

Important! If you use thin fabric for curtains, then the hem should be very small. When bending 1 cm or more, the edges of the curtains will look sloppy.

Before processing the edges of the fabric, you need to pin them with a needle with a round eye, mark them and then iron them. We bend the bottom edge by about 5-10 cm.
In order to process the top edge, you need to make a hem of about 5 cm on the wrong side, and using pins, attach the braid to it.

Important! If the braid is more or less than 5cm wide, then the width of the hem should be equal to the width of the braid. If you want to sew curtains for a wide braid, then when purchasing you need to take into account the size of the hem.

Now we sew the ribbon onto the curtain.

Important! To prevent the curtain tape from wrinkling, try to sew the lines in one direction.

At the end of the work, we tighten the cords in the braid, gather the curtain into folds, straighten them beautifully and tie knots at the ends of the side cords.

This DIY curtain curtain is ready to use!

Sewing a lambrequin

There is a wide selection of different lambrequins on the market, so first you need to decide how exactly you want to decorate your kitchen, living room or children's room. Lambrequins can be in different versions: arches, waves, cylindrical, teardrop-shaped, with folds or frill, decorated with braid or ribbon. In a word, you can make lambrequins with your own hands in different designs, as soon as your imagination allows. Examples of finished work on creating lambrequins can be found in the photo. There are so many of them that believe me, there is plenty to choose from.

The lambrequin must be mounted separately from the curtains and drapes, since regardless of whether the window is covered, it will always be in the same place.
It is easy and simple to sew a horizontal lambrequin. To do this, you need to cut out a strip along the width of the window, stitch the braid to it, trim the bottom edge with tape and completely assemble the braid.
It is much more difficult to create such an element of lambrequins as swag, since to sew it you need to create a pattern.

Important! In order to correctly construct a pattern, it is necessary to cut the swag at an angle of 45° to the direction to the grain of the fabric. In this case, the consumption of fabric will not be entirely economical, but the swag will lie flat with soft folds, without untidy creases.

The width of the pattern elements directly depends on the length of the cornice. For example, if you want to make a lambrequin from three swags, then sew them with a slight overlap, that is, overlapping.

Modern fastening systems for curtains are already an interior decoration in themselves. The assortment is represented by a variety of models with carvings, inlays, original shapes, with unusual painting etc. But in order for the design of the space to be truly original and exclusive, designers recommend thinking through individual decoration of the cornice.

Decorating ideas

There are many decoration options, it’s hardly possible to cover everything in one article; we will try to talk about the conceptual design techniques on which the rest of the design is based.

You can update the cornice yourself using ready-made decor or design and make your own decoration

Hood

A hood is a decorative plastic tape, in rolls, maximum length one piece 60 m. Glue or attach it to special lock- the easiest way to decorate a cornice. Suitable for baguette models with a smooth front part. You can cut the bar to size yourself and attach the overlay.

Very convenient option decoration, if you bought a curtain holder, but it doesn’t fit the interior or you want to update an existing baguette. Decorative tape on the cornice can imitate natural material, valuable types of wood, carvings, ornaments, be decorated in a modern style.

A polymer hood is a real find for designers; it helps to quickly decorate the cornice and update the interior

Paint

Painting the cornice to match the curtains is a quick, economical, creative way of decorating. The idea is suitable for decorating rods made of wood or metal, as well as for baguette. The surface is first sanded with a fine abrasive so that the paint does not peel off later. To ensure the strength of the decorative layer, it is recommended to apply primer.

When preparatory work finished, the cornice is painted in the desired color. Suitable for this purpose acrylic paints or formulations from a can. After applying the base layer, you can apply a design using a stencil or by hand with a brush. Next, the coating is secured with transparent varnish. This idea helps not only to decorate the curtain mount, but also to change the geometry of the space. When the curtains and cornice are the same color, it visually raises the ceiling, making the room seem higher.

A wooden or plastic baguette can be painted in an antique style, with gilding and patina applied to the base color. Also, use ready-made sets of paints with different effects: craquelure, velor, leather, metallics, mother-of-pearl, etc.

Unusual painting of curtain mounts will add an original touch and decorate the interior

Paste over

You can decorate the cornice by covering it with wallpaper, fabric to match the curtains, or making decoupage from napkins. The selected fabric is glued onto an abrasive-sanded base using PVA, and the edges are folded inward. After drying, apply 2 layers of protective varnish. Lace, strips of tulle, self-adhesive decorative tapes, beads, artificial rhinestones and even beautiful buttons are suitable for decoration.

Don’t be afraid to show your creativity, experiment, combine different materials

Decoration with flowers

Artificial flowers, imitations climbing plants– a great idea for decorating ceiling and wall cornices. The finished branches are attached to the bar using paper clips or decorative clips. To save money, you can make flowers from corrugated paper with your own hands and connect them into a composition using fishing line or thin wire wrapped in the same paper.

Shown in the photo flower composition to decorate the cornice

Hard lambrequins

Lambrequins are a traditional way to decorate a cornice. Usually they come complete with curtains, but you can make a separate composition. As a rule, this is applique or embroidery on a bandeau, which can be ordered by individual project, buy ready-made or make it yourself.

Exclusive lambrequin - accent, decoration and highlight of the interior

Openwork lambrequins have become a real find for decorating cornices with your own hands. Accessories are sold in rolls, by the meter, and come in different widths. There are custom models for openings standard length. Color palette small, but thought out to suit all styles, so you can always choose a decorative tape, if not to match the color of the curtains, then to match the furniture, floors, and upholstery.

The photo shows a finished openwork lambrequin, suitable for decorating ceiling and wall cornices

Figures and accessories

Very original idea for decoration - attach or place a figurine or soft toy on the cornice; multi-colored butterflies, birds, dragonflies, and bees look beautiful. The choice of accessories is huge, including stylized animals, ballerinas, and fairy-tale characters.

Accessories can be bought in a store, or made with your own hands, cut out of paper, strung with beads, crocheted

Decorating a cornice is an interesting and creative process; you can get by with ready-made solutions or show your creativity. Don't be afraid to experiment, but decor should be in moderation. Remember the combination of colors, the size of the cornice and the proportions of the room: in low rooms, top decor in the color of the curtains is recommended if the space is very high ceilings, then you can hang a wide lambrequin several tones darker than the main canvas.

When decorating the interior of an apartment, every detail, every little thing is important. One wrong stroke can ruin the whole appearance, and often a similar factor is curtain rods that do not comply overall design rooms. Making this piece of furniture to order is quite an expensive pleasure.

Therefore, it is not surprising that many owners prefer to make curtain rods with their own hands, fortunately today consumables more than enough for them. You can purchase components for the cornice and simply assemble it necessary design, suitable in size and appearance. Or you can make a product almost from scratch.

The main types of curtain rods

There are several characteristics by which curtain rods can be classified: by type, material of manufacture, installation location and number of rows:

Cornices can be either wall or ceiling. If earlier, as a rule, the first option was used, then in Lately Ceiling-mounted designs are increasingly being preferred. This point is due to the fact that wall curtain rods are less reliable and often break over time under the weight of heavy curtains.

The division can also be carried out according to the number of rows required for curtains. Today, designers often use multilayer compositions on windows as a decorative element. Therefore, today you can often find cornices in several rows of various designs.

According to the type of design, there are:

The most common option is a string cornice. The essence of this design is that the curtains move along stretched strings, which are preferably hidden with a decorative strip.
The tubular cornice has also been used for quite a long time and is familiar to many since childhood. The two fasteners and the pipe inserted into them have only one qualitative drawback. Over time, the surface of the holder loses its smoothness and the rings on which the curtain is held begin to move poorly.

Baguette cornice is a more modern version of this piece of furniture. It is a profile with grooves, usually mounted on the ceiling, and in some cases on the wall.

In addition, cornices can be made from the most different materials: wood, metal or plastic. And each raw material has its own advantages and disadvantages.

Metal curtain rod: a simple design of a complex design

Metal curtain rods are mainly used for heavy curtains and multi-row compositions. And this requires a rather complex design of the cornice. However, everything is not as difficult as it seems. It is not at all necessary to purchase an expensive metal curtain rod model. You just need to choose the right regular metal profile, buy hooks and attach the structure to the ceiling. In this case, the number of stripes in the profile should correspond to the number of intended rows of curtains. By the way, this option is perfect for Japanese-style curtains.

A tubular cornice can also be made from metal. As is clear, this will require an aluminum or stainless steel pipe of suitable diameter and brackets for its fastening. Or a metal rod, on which plugs are subsequently placed along the edges, for example, from wooden door handles.

Polyurethane cornice: design of non-standard window openings

Plastic curtain rods are best used for lightweight curtains, as this material is unlikely to be able to withstand too much load. The most common option is a tubular cornice, because it is quite easy to find material and brackets for it (for example, in a plumbing store). Similar products also include cornices made of polyurethane, a material that has higher performance characteristics than all other polymers:

Like any plastic, polyurethane is absolutely indifferent to water, so its use in rooms such as a bathtub or toilet is more than justified.

The material is also lightweight, increased strength (a cornice made from this raw material can withstand loads of up to 50 kg) and is resistant to high temperature. Such properties allow you to use a polyurethane cornice in almost any conditions and easily attach it to a wide variety of bases, including plasterboard structures.
In order to install such a cornice, you only need a polyurethane profile and hooks hanging on it. At the same time, the high flexibility of the material allows it to be given absolutely any shape.

Most often, polyurethane cornices are used for curtains in the bathroom and for decorating windows in bay windows.

Curtain rod made of wood: a new look at familiar things

Today, antique-style decorative elements are increasingly returning to the interior. The curtain rod made of wood was no exception. As a rule, wood is used to create decorative strips for one type of structure.

It is quite easy to make such a product, and you can decorate it at your discretion:

A strip the length of a cornice and a width of approximately 15 cm is cut out of a sheet of laminated chipboard, which is subsequently painted or covered with a self-adhesive film of the color you like.
If a sheet of laminated chipboard does not allow cutting a strip of the required length, it can always be added. To do this, as a rule, thick PVA glue and furniture staples are used.
Attach the plank to the ceiling using metal corners. Inside the structure, as a rule, strings are installed in one or several rows.

Or you can use another option for a wooden cornice. To do this, you need to choose a suitable... stick. Sand it, sand it and insert it into wooden brackets, which when certain experience You can also make it yourself. As a result, you will receive an original cornice that no one else has!

Curtain rod made of plasterboard - an element of a modern interior

Making curtain rods from plasterboard is a more difficult task than previous options. This requires some skill in working with building materials and tools. As a matter of fact, we will not even talk about the cornice itself, but about the niche in which you can install one of the models:

The design itself is a kind of box into which spotlights can be built in for additional lighting.
As a rule, a niche is made in the case of a suspended or suspended ceiling.

The main purpose of this design is to hide the cornice and the top of the curtains from prying eyes, so it is made along the width of the window opening or along the entire wall adjacent to it.

Please note that it is necessary to install such a niche for the cornice at the stage of manufacturing the ceiling itself, since subsequently performing such work is extremely difficult.

As you can see, there are quite enough options for making curtain rods with your own hands, both simple and more complex. All you have to do is show a little imagination and put in just a little effort and a new original item interior design will decorate your home!

interiorno.ru

It's hard to imagine modern home no curtains on the windows. Long or short, letting in light and creating a cozy twilight, heavy and almost weightless - curtains organically complement any interior. They are usually attached to cornices, which differ in design and material of manufacture. You can often find homemade curtain rods, especially in private village houses or country houses. Since the need to make a cornice with your own hands may also arise in a city apartment, it is better to know in advance what will be useful for this.

Wooden cornices are quite durable and are often decorated with rich carvings. They are made from pine, beech, oak and red trees.

Quality materials to get the job done

Tools at hand that can be used to make cornices: cuttings for garden tools, boards and their trimmings (for making side panels), parts metal pipe, wire remains. Of course, plastic pipes are also suitable if their strength allows them to be used for such purposes.

You will also need:

nails;
self-tapping screws;
sandpaper or Sander;
saw;
roulette.

Cornice options

DIY wooden cornice diagram.

The simplest and fastest option is a fishing line (wire) stretched between nails. Above the window, at the required distance (equal to the width of the frame or slightly more), 2 nails are driven in. A fishing line is attached to one of them and stretched to the second, through which it is twisted. The curtain can be hung by threading a fishing line into a specially stitched “pocket” (the edge of the curtain is folded and stitched), or hung on any not too heavy clips or hooks.

There is another option for homemade cornices - steel pipe or a piece of reinforcement. The edges of the pipe are treated with a grinder to get rid of unevenness. In addition, you can put tips on them, rubber is best, but plastic or wood will do. Next, rings with clips are put on the pipe, which secure the curtain.

Wooden cornice

You can’t ignore the most common option - a wooden cornice.

For light curtains, you can even use a processed tree branch (it will look very original). Add another 10 cm to the required length to attach the cornice. Any stick or branch needs to be sanded for smoothness. Then treat with varnish or wood paint.

Options 2 and 3 require wall mounting hardware. The easiest way is to use blanks cut from boards for this purpose.

The longest side is attached to the wall using self-tapping screws or special shelf mounts. The notch at the top serves as a support for the cornice. All corners can (sometimes even need to) be rounded - this way they will look prettier. The diameter and radius of the recess must correspond to the same parameters of the handle (sticks, pipes).

Attach the workpiece to the wall, insert the cornice into the grooves, and attach the curtains to it using rings, ties, and hooks.

These homemade products are very easy to make, and with the right amount of effort they look no worse than store-bought curtain rods. The costs of their production are minimal. A homemade cornice is ideal for country house, dachas, as a temporary accessory when renovating an apartment.

1pooknam.ru

How to make original cornices for a summer house?

uznamania.ru

Is it possible to make a cornice for traditional or Japanese curtains with your own hands?

Some owners, creating decor for window openings, prefer to design a cornice with their own hands. This is due to several factors. Some do not trust the quality of finished products, others are not satisfied with their price. Someone needs a special model that cannot be found in the store, and ordering from a specialist is quite expensive. A variety of detailed master classes allows you to familiarize yourself with basic recommendations and carry out work at the proper level. Today, at home, you can make not only traditional string curtain rods, but also holders for Japanese curtains and plastic rod options.

How to make a traditional string cornice?

String or cable curtain rods are the cheapest option for attaching fabric curtains. Unfortunately, such a solution looks quite cheap, so it does not always fit into the interior. There is a simple way out of the situation - a decorative strip is made for the string base, which completely covers the functional part. The approach can be used both when installing a system and when improving an existing structure. The only difference is that with the first option, the entire system is first assembled and then mounted on the ceiling or wall. In the second option, work is carried out to produce a strip, which is simply mounted on top of an already existing, unaesthetic cornice.

To make the product, you will need a piece of laminated chipboard sheet of the required length, width from 10 to 15 cm, thickness about 1.5 cm. Advantages of this material is that, if necessary, it can be shortened with a hacksaw or lengthened by fixing the additional part with glue and metal staples. It is worth considering that this can only be done if the part is used only for decorative purposes.

When the cut required sizes selected, work begins on its appearance. When using quality wood, beautiful carvings can be made. If you don’t want any complications, painting or varnishing will be enough.

Today there is a wide selection of decorative self-adhesive films, which can radically transform the appearance of the cornice. Such elements are inexpensive, and as a result you can achieve a design similar to expensive wood or even metal.

On last stage the cornice itself is constructed. If necessary, a string base is fixed to it, after which two or three rectangular metal corners with holes for hanging on nails or screws are screwed. The location of the corners depends on the type of fastening of the product. When wall-mounted, it remains possible to remove the part if necessary.

On the positive side The method is its simplicity and the fact that a decorative strip can hide not only the ugly base of the cornice, but also visible defects in the wall. On the other hand, when approaching, strings are most often used, on which heavy curtains and multi-layer curtain structures cannot be hung.

Production of the simplest cornice from plastic pipes

For the kitchen or similar household premises, you can independently make a simple and original cornice from plastic pipes. It is ideal for lightweight curtains with rings, loops or eyelets. True, this solution is temporary, but it’s perfect for a summer residence.

To carry out the work, you will only need a few pipes (depending on the number of valves), special holders and accessories for fastening structures. You can use screws and a drill for high-quality fixation, which will leave holes in the frame, or liquid nails, which will not leave marks, but will not last so long.

Ideal option The curtains for this curtain rod will be an hourglass design. It is very simple to make - you just need to secure the cornices on the upper and lower sections of the sash, stretch the fabric and pull it in the center.

This option can be called a job for the lazy: the whole process takes only a few minutes and does not require complex manipulations. You just need to cut the plastic pipes into pieces of the required length, fix them on the wall with screws or adhesive base holders, insert pipes into them. When using glue, it is recommended to first supplement the fixation with regular tape, which is removed after the base has dried.

Creating a cornice for Japanese curtains and rules for its installation

The most difficult process in making homemade elements is assembling curtain rods for Japanese curtains. The best option is considered an acquisition finished product with all the guides to which you can make a curtain frame, but if you really want, you can make a cornice yourself.

The very design of Japanese panels, consisting of stretched fabric panels, will look attractive only when correct installation guides, rigid fixation of grooves and the inability to rotate elements around their axis. This is achieved by using quality materials and specific additional products.

The curtain rod for Japanese panel curtains can be plastic or aluminum. Each section is intended for a separate curtain and has a base for fixing Velcro, on which the fabric sheets are attached. If you make the design yourself, you can use double-sided fabric with Velcro on both sides. This will allow you to change the appearance of the room depending on your mood.

The master must think about the number of tracks in advance: installing additional parts in such systems is very problematic. There are basic elements that allow you to install not one, but several guides on one track, which will allow you to maintain a small width of the structure and significantly save free space.

Some owners, when creating decor for window openings, prefer to construct a cornice with their own hands. This is due to several factors. Some do not trust the quality of finished products, others are not satisfied with their price. Someone needs a special model that cannot be found in the store, and ordering from a specialist is quite expensive. A variety of detailed master classes allows you to familiarize yourself with basic recommendations and carry out work at the proper level. Today at home you can make not only traditional string curtain rods, but also holders for Japanese curtains and plastic rod options.

How to make a traditional string cornice?

To make the product, you will need a piece of laminated chipboard sheet of the required length, 10 to 15 cm wide, about 1.5 cm thick. The advantages of this material are that, if necessary, it can be shortened with a hacksaw or lengthened by fixing an additional part with glue and metal staples. It is worth considering that this can only be done if the part is used only for decorative purposes.

When a piece of the required size has been selected, work begins on its appearance. When using quality wood, beautiful carvings can be made. If you don’t want any complications, painting or varnishing will be enough.

Today there is a wide selection of decorative self-adhesive films that can radically transform the appearance of the cornice. Such elements are inexpensive, and as a result you can achieve a design similar to expensive wood or even metal.

At the last stage, the cornice itself is constructed. If necessary, a string base is fixed to it, after which two or three rectangular metal corners with holes for hanging on nails or screws are screwed. The location of the corners depends on the type of fastening of the product. When wall-mounted, it remains possible to remove the part if necessary.

The positive side of the method is its simplicity and the fact that with a decorative strip you can hide not only the ugly base of the cornice, but also visible defects in the wall. On the other hand, the approach most often uses strings, on which heavy curtains and multi-layer curtain structures cannot be hung.

Production of the simplest cornice from plastic pipes

The ideal curtain option for this curtain rod would be an hourglass design. It is very simple to make - you just need to secure the cornices on the upper and lower sections of the sash, stretch the fabric and pull it in the center.

This option can be called a job for the lazy: the whole process takes only a few minutes and does not require complex manipulations. You just need to cut the plastic pipes into pieces of the required length, attach the holders to the wall using screws or adhesive, and insert the pipes into them. When using glue, it is recommended to first supplement the fixation with regular tape, which is removed after the base has dried.

Creating a cornice for Japanese curtains and rules for its installation

The most difficult process in making homemade elements is assembling curtain rods for Japanese curtains. The best option is to purchase a finished product with all the guides to which you can make a curtain frame, but if you really want to, you can make a cornice yourself.

The very design of Japanese panels, consisting of stretched fabric sheets, will look attractive only if the guides are correctly installed, the grooves are rigidly fixed and there is no possibility of the elements scrolling around their axis. This is achieved through the use of quality materials and specific additional products.

The master must think about the number of tracks in advance: installing additional parts in such systems is very problematic. There are basic elements that allow you to install not one, but several guides on one track, which will allow you to maintain a small width of the structure and significantly save free space.

To fix the panels of Japanese curtains, there are several options for the arrangement of parts, which provides a variety of decorative solutions, but can significantly complicate the work of a home craftsman. You need to think about how to manage the system in advance. If direct manual control is refused, a special cane is installed. If there is a need for electronics installation, it is recommended to turn to professionals. The slightest inaccuracy in the settings will lead to the fact that any movement of the panels will turn into a complex and painful process.

When producing cornices for Japanese curtains, you cannot use standard systems; in any case, you will have to purchase specific profiles. As practice shows, self-production Such products are not always cheaper than buying a ready-made model and having it professionally installed. It’s better to pay once than to later call specialists to dismantle the structure, adjust it and reinstall it.

Conclusion

Designing, creating and installing a homemade cornice is a labor-intensive process, but if all the rules are followed, the result of the work will exceed all expectations. Not every owner can boast original product in the decor of your home, so such touches are always highly appreciated.

Designers remind us that we shouldn’t focus only on the functional side of the issue. Thanks to the abundance of fittings, even the simplest product can be decorated in accordance with the basic style of the room and emphasize its uniqueness.

As for Japanese panel curtains, it is better to trust the craftsmen, especially since in the light of growing competition the cost of such work is no longer so high.

Sections