Pergola, gazebo, greenhouse made from old doors with your own hands. Door to the gazebo: ideas from sliding systems to wooden gates Sliding doors to the gazebo

home

Installation

Sliding glass doors are characterized by a number of advantages: they save space, have beautiful view and easy to maintain. They visually increase the volume of the room and have good aesthetic qualities.

Sliding glass systems are ergonomic, functional, and original. They can be made according to individual project, but standard ones are cheaper. Glass doors give modern look, lightness to the room, improve illumination. They fit well into the interior of the gazebo, creating comfort, convenience and coziness.

Types of doors by design and filling

Installing doors in a gazebo

By design they are distinguished:

Single doors
Single-leaf with side parts or with a fixed component
Bivalve
Double-leaf with movable or fixed leaves
Radial.

Radius sliding glass doors fit perfectly into gazebos with round shapes. This is an expensive option, because you need to make curved rails and a curved door leaf. This sophisticated option impresses with its originality and comfort.

Various glasses are used for doors: tinted, frosted, stained glass, decorated. Canvases with a pattern that is applied are also used various methods. A unique design can be created using a stencil or decor. Original element decorations: doors with mosaics, volumetric decorative elements. Sometimes a film is glued that differs both in texture and in a variety of colors.

Acrylic, tempered, impact-resistant, triplex - these are the types of glass used depending on the strength characteristics. The use of special glass, which shatters into small fragments upon impact, saves you from serious injuries. Durability and safety are important advantages.

Glass doors are framed in aluminum, wood, plastic, or can be frameless. Used for gazebo aluminum profile in order to increase strength.

The aluminum sash has good load-bearing qualities. With its help it is possible to produce structures of considerable size and different color, because painting is possible. Glazing without a frame: stylish, original, fits into a gazebo of any architecture and offers an excellent view.

Advantages and principle of operation of sliding doors

Self-installation doors in the gazebo

Main advantages glass doors:

Space saving
Easy opening
No thresholds (if there is no bottom guide)
Self-opening resistance
Versatility
Safety.

Sliding glass structures have the same operating principle as sliding wardrobes: they are held on top by carriages and moved apart in different directions. A sliding door is perfect for a gazebo. Reliability, practicality, and original design ensure comfort and safety.

The door structure consists of a roller mechanism, glass and guides. There may be several of them. The kit also includes fittings, decorative panels, trims. The fittings are used of a certain type: they should not protrude above the surface so that the structure can move to the side or into a niche. The guides and roller mechanism are selected taking into account the number of leaves, weight and type of door.

Glass doors are quite heavy and you need to choose a durable and reliable mechanism. The guides for the gazebo must be secured at both the top and bottom so that the structure ensures safety.

Tools and components used to install doors

Door handles, rollers, rails, fasteners, stops, bolts - the main components.

The following tools are used for work:

Screwdriver
Roulette
Drill
Level
Polyurethane foam
Mounting kit.

Do-it-yourself door installation

You can install the doors yourself if you buy the necessary components and have knowledge of installation technology.

First you need to mark and install guides along the marked lines (on the ceiling and on the floor). They must be strictly horizontal and longer than the opening to eliminate the possibility of the doors falling off.

Glass doors have fasteners made of metal claws with internal rubber pads. The glass is secured with screws. The roller mechanism can be hidden behind a decorative strip.

The installation of sliding doors is discussed in detail in the video:

Operating procedure:

Doorway measurement
Installation of the bottom rail with checking for unevenness with a level
Complete set of the canvas with fasteners from the bottom and top
Installing the top bar
Attaching the guides to the plank using self-tapping screws or dowels
Installation of locking pads
Consolidation decorative panel to improve appearance
Installation of accessories.

For glass doors, handles made of anodized aluminum or of stainless steel to ensure reliability and durability. Modern sliding doors complete with handles different forms with recesses.

The glass is brought to the upper guide and suspended. While tilting the glass, make sure that each roller engages. Next, the canvas is joined to the lower guide. The doors are moved and opened several times to check that they move smoothly and that there are no distortions.

You should not buy sliding doors in small organizations, which will not be able to provide decent quality. Good manufacturer must provide a guarantee. Low cost is a reason not to trust the company, because glass structures are not cheap.

Sliding doors are stylish, convenient and beautiful. They are very popular because they are not only beautiful, but also functional. The ability to move apart in different directions and quickly change the environment allows you to install sliding doors as a successful and practical element of the interior. But if they are not installed correctly, they can rattle, move unevenly, or jam.

Therefore, the sliding mechanism must be carefully selected.

Possibility of transformation from closed space in the open, a huge choice of design, panoramic views, safety, durability, ease of maintenance - all these advantages allow you to use sliding structures as great decoration summer cottage plot.

See how to make a pergola from old doors. From them you can make a gazebo, a washbasin, a tool shed, and from the windows you can make a greenhouse.

The content of the article:

The new summer season has begun. Those who like to work and relax fresh air they yearned for their hacienda over the winter, are looking for new ideas for inspiration, and are happy to implement them. To ensure that you have enough funds for all your ideas, use items that have served their time as materials. Using old doors you can make a pergola, a shed for equipment, a toilet, a gazebo, and a washbasin.

How to make a pergola with your own hands?

If you don't know what this design is, then read about it now. The word “pergola” comes from Latin and Italian words and means “building”, “canopy”. It is created for beauty, so that climbing plants can freely weave along this structure, protecting people from the scorching sun when they walk along this terrace.

The design consists of sections of arches that are connected into a single structure by transverse beams. Pergolas can be attached to buildings; they will decorate open terraces. Sometimes they are attached to gazebos or pergolas are built.

If you have a lot of material, then you can make a larger structure. If you changed your balcony or interior doors and didn’t throw away the old ones, then give them the opportunity to decorate your dacha.

Such a pergola in landscape design looks wonderful, to make it you will need:

two doors;
White paint;
primer;
sandpaper;
brush;
boards;
self-tapping screws;
screwdriver;
crushed stone.

To remove from doors old paint, use a special solution to remove such coating. You can put newspaper on the surface, iron it with an iron, after which the layer is removed with a spatula.

Sand the prepared surface; if it is not smooth, first go over it with wood putty. Once dry, make the surface smoother using sandpaper, then prime the canvas, cover with 2-3 layers of paint.

These prepared blanks are connected by vertical crossbars. If you have a jigsaw, then shape them in the same way as in the photo, if not, just cut them to size. Make two notches in these crossbars on each side, put them on the doors, and secure them on the sides with screws.

To make the structure more durable, connect the parts at the top with boards sawn off at an angle of 45 degrees. They and the horizontal rafters also need to be painted. This pergola is installed on crushed stone; if you want to place it near the veranda, then attach it to a wooden floor.

Corner brackets can be used as fasteners. If you don’t want to bother with preparing the door and painting it, you can, on the contrary, artificially age it.

If you have roof elements left from construction, then connect the doors using them. Below you can fix the pergola on wooden pallet using corners. Then it won't touch the ground, and wooden parts will not rot.

If you want to not only admire such a structure, but also have the opportunity to sit there and relax, then take:

4 door leaves;
four figured brackets;
self-tapping screws;
fastening metal corners;
white paint and brush.

Attach the top sheet to the vertical ones using openwork brackets of a contrasting color, and in the center using the corners. Also use the corners to secure the horizontal door as a bench. This design must be installed on concrete base or on crushed stone so that the lower door leaves do not touch the ground.

By the way, if you like an openwork design and don’t want to spend a lot of time with painting, look at how to make a pergola using carved pillars and balusters.

Each of the two pairs of carved pillars must be connected by railings and balusters at the top and bottom. A small one is made on top gable roof, which unites the right and left walls of the pergola. It is decorated with carved elements.

You can plant climbing plants outside one and the second wall or attach boxes and place flowers in them. Inner space can be used, made here small shop. To do this, beams or corner brackets are attached to walls 1 and 2.

There are other ideas for using old doors.

How to make a washbasin for a summer house from old doors?

To make one, take:

door;
bars;
planks;
fasteners;
table top;
hooks;
two figured brackets.

Making master class:

Two bars will become the front legs of the sink. Choose from four boards for the table base. You need to cut a recess in the countertop in the shape of a sink, place it here, and place a container underneath, which will need to be poured out periodically. You can install a flexible hose under the sink and lead it into a drainage system or ditch so that water flows there.
On lower parts The legs are secured with four boards, and four more are stuffed onto them, which will become the lower table. Attach hooks at the top to hang towels and small garden tools.
2 openwork corners are attached even higher. A shelf is fixed on them, on which flower pots are placed.

You can put 4 beams perpendicular to the door so that inner dimensions were the same as a large sink. Such a washbasin for a summer house will be spacious. Here you can wash not only your hands, but also dishes.

Old door on next photo It also easily turned into a country washbasin.

If you don’t want to cut a hole in the countertop and install a washbasin, then make a comfortable table with shelves from the door leaf.

This makes it convenient to do small gardening tasks: picking seedlings, planting flowers in pots. You can attach hooks to the door and hang a small garden tools so that it is at hand.

It’s not difficult to make a flower girl out of an old washbasin. After attaching it to the door, pour soil here and plant plants.

Such a door doesn’t even need to be painted, just put it against the wall, but for better fixation, you can make hinges at the top, drive nails into the wall or attach self-tapping screws, and put hinges on them.

If you also have an old window that you hate to throw away, you can turn it into one of the sides of a table or washbasin.

Gazebo design made of doors and wood

To create such a vacation spot, you will need:

five doors;
floorboards;
hinges for doors;
metal corners;
self-tapping screws;
a small sheet of corrugated board;
4 beams;
crushed stone.

Creation plan:

Level the area for the future building, pour crushed stone here, and use 4 beams to make a base for the floor. Place boards on top of it.
Connect two doors that will become the back wall. Using metal corners and self-tapping screws, attach two more panels to it at an angle of 90 degrees. These doors will become the sides.
These panels have glass, but for the top door you must use a door without glass. You need to place it at a slight angle so that the water drains and the snow melts away. To do this, either use side doors that are taller than those that became the back wall, or attach angled timbers to these side elements.
Fix a sheet of corrugated sheeting on top so that it is slightly larger than the gazebo on all sides. You can use another roofing material. The bottom of the door can be attached to the floor, also using corners.

This design of the gazebo allows you to use recycled materials and save a lot of money.

The next structure is also created based on the door. There are 3 panels installed at the back and one on each side. Since this structure is slightly larger than the previous one, boards need to be attached to the ceiling, but you can fix the remaining doors here transversely, using them as the base of the roof.

To give rigidity to the structure, timber with a cross-section of 100 or 150 mm is placed at the corners; the structure must first be fastened at the bottom with floor fixing elements, and at the top? roof details. It’s nice to sit in such a gazebo without doors in the heat; here you can hide from the rain, since the roof will not let you get wet.

This structure will appeal to both adults and children.

By the way, we can recommend the following design to the kids. Of course, the doors must first be well connected to each other or securely fixed near the fence.

Various shelves and hooks are nailed onto them, where children can hang and put their toys and belongings. And adults can attach flower boxes to similar structures to decorate the area. You can fix the slate board and write messages to each other on it in chalk.

Even a lonely door painted in White color, will become an excellent design element for a dacha if you attach a box to it and plant flowering plants in it.

Even if you only have the base of the canvas left, there is no longer glass and a plywood partition on it, such a door will still serve. At the bottom the box is fixed on it, and at the top the flowerpot is hung on a hook.

This vertical gardening is perfect for a gazebo, as you can place flowers with reverse side this building. It’s nice to sit in such a building in the fresh air and admire the colorful colors of the plants.

But let's return to our topic to see what other gazebo design there could be.

Four canvases will become the sides and back wall, and the fifth will turn into roof of the lung buildings. As you can see, the doors don't have to be painted to give this corner dachas easy a touch of antiquity.

It seems that the following structure has also been on this site for many 10 years.

For his back wall uses door panels, but old windows are suitable for the side panels. Unpainted board gray is hammered in as roof elements, the first one needs to be nailed at the bottom of the slope, the next ones are gradually attached on top so that each one located above overlaps the previous one by 1-2 cm. Then the rain will not penetrate inside.

You can also use the doors to make a small shed for storing tools. For it you will need:

four doors;
boards;
bars;
roofing material;
fastening tools.

Make a base from four bars, place it on cement slabs, fill the boards at the top, place 3 door panels here, secure them at the corners and at the bottom with corners and self-tapping screws. Attach two bars vertically to the front panel. Screw to one of them door hinges, steam rooms need to be fixed on the door.

Nail four bars on top, fasten the rafters to them, fill the boards, and fasten the sheet of the roofing element.

You will get a pergola-pergola if you make a structure like this.

The doors can be used as side walls; inside there is a bench on which a mattress is placed so that you can sit on a soft one or lie down. climbing plants planted behind the side walls. This corner of the dacha looks amazing.

The next pergola is made in white and pink tones. Two doors without glass are suitable for it. If they have plywood underneath, leave it, if not, stuff boards in there. On top part the doors are nailed with slats at an angle of 45 degrees perpendicular to each other.

The gable roof is made from rafters, with boards placed on top. A bed is fixed inside. All this charm is covered with pink and white paint. All that remains is to secure the flower boxes outside, put soft pillows on the bench, and hang two tulle curtains at the entrance.

You can make a small garden greenhouse out of glass doors, look how amazing it looks.

Old windows will make a wonderful, reliable greenhouse. It is better to cover this issue in more detail.

How to make a greenhouse from windows yourself?

It will also require recycled material left over after the renovation. If you have glass doors, get them. If you don't have them, you can use a door frame with glass inside. Windows are perfect for your next mini-greenhouse.

Before you make a greenhouse yourself, see if you have:

cement blocks or bricks;
bars;
sand;
self-tapping screws;
there are enough windows.

Flatness horizontal design during construction, it is necessary to check using a level and, if necessary, make adjustments.

First of all, you need to level the site on which you will build. Remove the turf around the perimeter to a small height and add sand here. Place blocks or bricks on top; it is better to connect them with cement mortar.
When it dries, place the slats on top along the perimeter, fastening them with corners and screws.
Now the bars are vertically attached to this wooden base; the distance between two adjacent ones should be equal to the width of the window. At the next stage, you will need to insert them here and secure them to the side with self-tapping screws.
Now place the horizontal beams on top and also connect them together. Do not fill in the small side wall on one side yet, as this will be the entrance.
Mark on the upper horizontal beams where you need to make small recesses for the rafters, make them. Secure the roof base on top. For this you can also use glass frames or durable cellophane. If you don’t want to remove it for the winter, then it’s better to fix transparent polycarbonate here. From this and from the frames you will make doors.

Here's how to properly make a greenhouse from scrap materials. You found out how many ideas for a summer house old doors and windows can give.

In conclusion, look at the intricacies of building a greenhouse from window frames. This may be useful for summer residents.

You will also probably be interested in a video review that tells how to assemble the gazebo structure alone.

The construction of the gazebo does not end with the assembly of the frame. There are still a number of nuances that remain to be settled, one of which is called the door. The publication presents various options fulfillment of this moment.

I will not dwell on the classic door with steel hinges. You can come to the store at any time, take the cheapest one from the display window and easily install it on your site.

Below there will be more interesting construction solutions.

A professional solution would be to install a sliding system in doorway your gazebo. The option is more suitable for large buildings, but for small ones it can also be considered.

The sliding system consists of several double-glazed windows that slide to one side. As a result, there is free space for movement. If necessary, the door slides back and tightly closes the gazebo.

The effect of movement is clearly shown in the video from the channel “ INTRUST».

Accordion

In part, they can also be called sliding, but this is not entirely true.

Rather, they fold, and during this process they take on the shape of an accordion. This is clearly shown in the photo below.

Wouldn’t you like to have such a view from the windows in your summer cottage? 🙂

Double-glazed windows run along guides from below and above.

If necessary, they open and several double-glazed windows are moved to one side. Then they go back, stand in their original places and are fixed. If desired, you can use only one door.

"Gates"

Saw it several times on the internet interesting idea with doors in the form of gates. I associate them with the American wild west, taverns and cowboys. Look at the photo below, don't you think so?

Polycarbonate

The idea is more often implemented in greenhouses, but if you have polycarbonate left and don’t have enough doors, why not make a budget passage to the gazebo?

The installation process is elementary. The main thing is not to crush the slabs and save the material before it is installed in the doorway.

Other interesting ideas

Finally, I will make a small selection of options that evoked pleasant emotions and associations in me.

I would not say that it is very advisable to spend a lot of money on a regular summerhouse, especially if there is nothing of particular value inside. But for the sake of interesting impressions on guests, this can be done. I am sure that the summer residents whose doors were included in our selection succeeded :)

Most Russian gazebos will probably still have classic doors. But if we please at least one person with an interesting idea and he implements it, then our mission can be considered completed.

Sliding doors, the doors of which are made of glass, are distinguished by their special aesthetics. Besides that sliding partitions allow rational use of space, transparent material gives the interior sophistication and lightness, promotes good illumination of the room. But glass canvas has significant drawbacks: the high cost and fragility of the material, which requires careful handling of the structure. The production of glass panels can only be done by specialized companies with necessary equipment for glass processing.

A good alternative to natural glass are various polymer materials. One of the most popular transparent polymers, which is used for the manufacture and installation of transparent panels for sliding structures, is polycarbonate. This material is impact-resistant, lighter than glass, has the same transparency, and most importantly, you can make sliding doors from polycarbonate with your own hands.

Features and types of material

Polycarbonate is produced in monolithic and cellular versions. These materials have different aesthetic and specifications. Each type of polycarbonate is installed in a sliding structure of a certain type, which ultimately determines appearance finished sliding door and partition made of polycarbonate.

Important! The variety of polycarbonate sheets allows you to use it for the manufacture and installation of a sliding door, similar to natural glass, or use it as a decorative panel material. It can be used as independent material for the manufacture of door leaves, and in combination with other decorative materials (laminated chipboard, MDF).

Monolithic polycarbonate

This is a single sheet of polymer with a smooth surface. It is a full-fledged analogue of natural glass.

They are produced by analogy with silicate glass sheets with a material thickness of 2-12 mm. Thus, it is possible to make either a frameless panel with a thickness of 10 mm for installation in a hinged structure for glass doors, or use them as inserts in a profile frame for sliding systems sliding wardrobes.

Thick sheets of this material are highly durable and are also called anti-vandal. They are not only resistant to impacts, they cannot be broken even intentionally.

Cellular polycarbonate

This material is a hollow sheet that consists of two or more thin layers connected by thin bridges. Manufactured by extrusion.

Due to the cellular structure, a door made of this material weighs more than ten times less than a door made of glass.

Due to the multi-layer nature of the material, it cannot be made as thin as monolithic polycarbonate. The thickness of the produced sheets starts from 4 mm. Panels 32 mm thick are made from cellular material.

Important! When planning the dimensions of a sliding door or partition made of polycarbonate, you need to remember that the width of the strip of cellular material is 2.1 m, and its length is cut in stores in increments of 1 m. The length of the end profile for polycarbonate is associated with these dimensions.

Profiles for polycarbonate

Several types of profiles are produced for mounting and covering the edges of polycarbonate sheets. They are made of aluminum and polycarbonate. When making a sliding door, only end profiles may be needed to decorate the frame and create a rigid frame. This depends on the door design, the type of sheet material chosen and technical capabilities experts in quality cutting of material at home. Such a profile may be needed to stiffen the panel and make a door edge that will hide chips.

The end profile closes the honeycombs of the cellular sheet, which are open at the ends, from moisture and dust getting into them. If you do not cover the ends with a profile, then over time the material will lose its transparency. Particular care must be taken when closing the ends of the polycarbonate when installing a bathroom door.

The end profile, which acts as a frame, will give the door an aesthetic and finished appearance.

For any purchased sheet there are end profiles of the appropriate thickness: from 2 to 16 mm. The length of the profile is the same as the width of the polycarbonate - 2.1 m.

How to work with polycarbonate

After purchasing cellular polycarbonate, you will notice that its ends are sealed with tape. This is a temporary protection that needs to be removed. After cutting the polycarbonate, the ends with open cells will need to be sealed with sealing tape. The end profile is placed over the tape. To hold an aluminum or polycarbonate profile, it is placed on small droplets of transparent silicone.

In addition to the ends, the polycarbonate is covered with film on one (front) side. It is removed only after the installation of the sliding door made of cellular polycarbonate is completed. The only thing that needs to be done is to partially peel it off along the edges, where the frame profile will fit and the roller carriages will be attached. In addition, this will prevent the sides of the leaf from being mixed up if a sliding door of two or more leaves is installed.

Important! Before cellular polycarbonate is sealed and installed into the sliding door frame, it must be kept in a dry air environment. This will prevent the formation and accumulation of condensation inside the sheet cells.

To cut the material, use a jigsaw with a fine-toothed file, a grinder, or a stationery knife.

Frame panels

The polycarbonate design with a frame will be more noticeable and will be perceived as a full-fledged door. The frame will serve as a frame, which will give rigidity to the panel.

The compartment version is most suitable for making a sliding door made of polycarbonate. Frame made of profiles for sliding design Sliding doors made of polycarbonate are assembled with self-tapping screws; there is no need to install additional fittings on the door leaf. Polycarbonate with a thickness of 4 and 10 mm can be installed in the frame. Thin parts are installed in the profile using a special seal. In this option, you can make a combined fabric, with inserts made of monolithic, cellular, transparent or colored polycarbonate.

Sliding mechanisms with frame canvases, there are supporting and hanging ones. In the rooms, hinged systems are installed, in which there is no bottom guide, and the door is held in place using U-shaped flags installed on the floor to the side of the opening.

IN support mechanisms the canvas moves along the lower guides, and the upper roller serves to balance the sash. Support structures are installed in openings with low traffic.

The rollers in structures with a frame are attached to the upper and lower horizontal crossbars of the frame frame. Each manufacturer produces its own range of profiles, which differ in shape and type of coating, but all standard sizes they have the same ones.

Sliding mechanisms for frameless panels

Sliding systems designed for glass panels differ from conventional carriages in the mechanism of attachment to the canvas. They are designed for installation of sheets with a thickness of 8 to 12 mm. They have two types of fastenings: clamping and point-clamping. The principle of their operation is as follows: two long strips wrap around the panel from the end on both sides and are clamped. In point-clamping systems, the screw that tightens the jaws of the clamp passes through the blade, and a hole must be drilled for it. In clamping systems, the clamping jaws are placed on the end of the panel, and the clamping screw is located above the blade.

Important! In these cases, an aluminum end profile must be installed on the canvas.

All designs with fastening roller carriages to glass (polycarbonate) come only with an upper sliding type. There are three main types:

Open;
Closed;
Mounted.

System open type It is a guide in the form of a pipe along which a roller in the form of a pulley rolls.

Closed designs usually have clamp-type roller carriages, and after installation, the top guide is covered with a decorative strip.

In a hinged system, the roller carriage is mounted on the side of the panel, and the guide is not above the sash, but behind it.

Video on how to cut polycarbonate:

In sliding systems, polycarbonate is a cheap and practical alternative to glass. But due to the flexibility of this material and the presence of chips after cutting, the panels must have a frame frame made of a profile that will hide all defects and make the sash rigid.

In contact with

Comments

Roman 04/21/2019 03:43

Hello! I share the feelings of the previous speaker! I would like such doors. I am writing from Voronezh

Grade

New articles

New comments

S.A.

Grade

Svetlana

Grade

Sergey

Grade

Sergey

Grade

Alexei

More recently, many people associated the word polycarbonate with a cottage or private house. This is because back in the days Soviet Union polycarbonate was used only for growing crops in greenhouses. Products of this type were only available in the form of thermal structures for plants. They were located only in dachas, but not many could afford them, they were expensive. Most of our population, lacking the opportunity to purchase polycarbonate, made greenhouses with my own hands from everything that came across. From wooden products, to metal.

In modern times polycarbonate greenhouse widespread, but this is not the only purpose of this building material. Today you can also see shopping pavilions made of polycarbonate, and gazebos, as well as road transport.

The material is very light. Any products made from polycarbonate are lightweight when compared to their counterparts made from plastic or metal.
The material also wins in terms of strength. For this reason, even showers have polycarbonate elements. For example walls and doors.
High fire resistance parameter. For example, if a polycarbonate product catches fire, it will quickly go away, because there is nothing to burn in the polycarbonate. There will be no disastrous results.
The material is practical to use. For example, the doors from our hero are simply cleaned with standard cleaning agents detergents for dishes.
Longevity. Having installed a door made of this building material, you can forget about replacing them for decades, even if they become morally obsolete.
Exposure before temperature changes. Even though the most popular interior doors today are made of polycarbonate, the door at the entrance will serve no worse, and even more so, for a very long period of time.

If you plan to make polycarbonate doors with your own hands, you need to understand certain data about them. From the above it follows that doors are divided into the following categories:

Interior doors. We install them directly indoors in order to separate one room from another.

Mounted. They are attached to the existing frame in the opening.

Sliding type. They should be mounted on a special guide; such a door will open along the wall, as if driving into it. These doors are much stronger. For this reason, it makes sense to install such doors in the nursery, because they have a high degree of security.

Types divided by design features

Frame type doors. They look like a special frame in which polycarbonate is fixed. The material from which the frame is made can be absolutely any. From wood to plastic and metals. Doors of this type can easily be found in retail premises and industrial places. They are quite cheap.

Frameless door type. This, without a twinge of conscience, can be said to be an elite type of door. Already outwardly they are very different from all of the above. If you want to make such a door with your own hands using polycarbonate, you will need to familiarize yourself with examples of these doors from catalogs. The shape of this type of door adheres to certain conditions; it is elegant and discreet in design. There is no need for frames to install such doors, because they are made from entire fragments of polycarbonate.

Types divided by design features

Tools

The production of polycarbonate doors does not require any significant experience in this area, but it is necessary to be careful, paying attention to increased attention various details. Since polycarbonate products are processed very simply, the tools required for this type of work are small.

Necessary tools for making a door

hand saw;
hacksaw;
circular saw;
jigsaw;
hand drill, electric type is also suitable;
drills of the required sizes;
machines that make it possible to cut at an angle;
awl;
hammer;
measuring instruments (ruler, protractor, level, triangle, each, preferably 20 cm or more);
fasteners and fastening elements.

Additional building materials for frame-type doors

self-tapping screws;
bars;
corner made of metal or plastic;
polycarbonate sheet;
canopy

Additional building material required for the manufacture of sliding doors

Fittings to install a sliding door,
a guide mechanism (usually a metal tube) with anchors;
fasteners;
polycarbonate sheets;
door knob.

Installation of a hinged polycarbonate door

If you intend to install a frameless door, you will need:

Carefully and accurately find out the dimensions of the opening and record the obtained parameters. Right angles will require the most attention, because it is they, if the measurement was incorrect, that will give you problems with skew.

It is necessary to tighten the corners with the help of corners so as not to encounter any distortion. The door is installed using a canopy.

Take measurements of the opening and the door itself that was in this opening.
Measuring the doorway
Grinding of the frame surface, both internal and external, is required.
It is necessary to treat the frame with varnish or paint. We recommend painting with stain or polish, this way the frame will look more beautiful.
Now you need to sheathe the frame directly with polycarbonate. We connect the sheets according to the principle below.
Installation of polycarbonate through a connecting profile
It is necessary to fix the canopies and finish the work.

Installation of a polycarbonate sliding door

The design of this type is distinguished by a guide; with its help, you will have the opportunity to use the door not as an ordinary one, but parallel to the wall, which many people associate with science fiction films of the last century. This option will save used space in the house. If you prefer a model with a single sash that perfectly blocks the path to drafts, then as a bonus, you will also insulate the room.

Installation of sliding door mechanisms

It is necessary to fix the guide above the doorway, standardly it is 5-10cm.
Secure the rings into polycarbonate sheets.
Then, you need to attach the entire structure to the guide.
Bottom line: the assembly of polycarbonate doors, no matter what type you prefer, is carried out using a very simple method. It all depends on the size of your own desire.

Installation of sliding door mechanisms

Sections