Benches near the house. How to make a garden bench with your own hands

home

Kinds

If you have come to this page, then most likely you have a need to purchase or make a bench for a gazebo.

This article will collect the most interesting options benches and benches that can be used to equip your recreation area. We will also look at the construction process wooden bench on your own, since you can save money on this item and get even better results.

Set of wooden benches and table

You can read more about furniture for the gazebo in the publication -.

Many owners do not pay special attention to this furniture. They bet on the first thing that came to hand and forgot. Over time, the table gets dirty, the chairs become deformed, the bench wobbles, but no action is taken.

I would like to draw your attention to the fact that the recreation area should at least be neat and comfortable. If at least one of these factors does not coincide with the real situation, it’s time to think about changing it.

The meaning of wooden benches and benches is approximately the same - to seat people on a flat surface to make it comfortable and safe. Depending on your desire, you can add a backrest to the design of the bench, then the sitting will be more comfortable (although this is not always appropriate).

Massive wooden bench

Below you will see photographs of options for arranging gazebos with benches. Examples with and without backrests will be shown, as well as from a combination of materials - wood and metal.

Bench without back

The simplest, cheapest and most reliable option is a bench. It fits perfectly into any interior, does not take up additional space and allows you to sit at the table maximum amount of people.

As with any seating furniture, one of the most important indicators is its stability.

You will be surprised when you start checking country furniture your friends or even your own, and you will not find practically a single object that would stand perfectly on the surface (if you have not taken up this issue before).

The bench may be level, but the floor surface is no longer there. A number of questions immediately arise: change the floor, sit on an unstable bench, or modify it to accommodate the unevenness of the floor?

These are the problems that summer residents face when it comes to organizing a recreation area. Therefore, purchase or self-production finding a good shop may turn out to be more difficult than you originally thought.

Bench with backrest

The option with a backrest is more convenient and aesthetically pleasing. Its design is noticeably more complex compared to the bench. To install it, you may need a support on the wall or a “dead” mount to the floor.

Therefore, before looking at anything, you need to take the dimensions of the internal area of the gazebo and ask yourself the question - what optimal size there should be a bench and how to place it.

In respect of appearance and their qualities can be completely different.

It could be a thick solid oak that will last another 50 years, or it could be a structure made of boards that will rot, become deformed and require additional maintenance.

There are many ideas (I saw more than 30) on how to make a bench out of old furniture- chairs, beds, chests of drawers and the like. If you approach this issue creatively, the result will not be as “collective farm” as it seems at first glance. A couple of examples are below.

From old chairs

From an old bed

Made of wood and metal

You could see similar pairs of tables and benches on city streets, parks and squares. Most often this is a metal base and wooden table top(if we are talking about a table) or a wooden seat and back (if we are talking about a bench). This design allows you to reduce the size of furniture, which is extremely important in limited space gazebos.

Folding

A convenient option for a summer house is a folding bench. Thanks to its design, it is very easy to move from place to place - this is especially true for those who will constantly carry this bench from home to the gazebo and vice versa.

If this option solves your problems of this kind, then for 1850 rubles you can buy it in the store “ Wooden-World».

Set of table, benches and chairs

Online stores rarely offer to buy a single item. Most often, there are sets of different formats, the basis of which is a table, and in addition there are chairs and/or benches. By the way, in addition to the bench, we talked about this in detail in another publication.

I would also like to introduce you to them; it is likely that one of the examples will hook you and in the future will decorate the interior of your gazebo.

Set of table, benches and chairs made of larch

Instructions for self-production

It seems like such an elementary thing - a bench. He sat down, leaned on his back, stretched his legs, and rested. But if you think about its design, a completely logical question will arise: “How to make it so that it does not tip over?”

To answer it correctly, it is necessary to study the experience of professionals and amateurs who have already studied this point. Below we will look at an example of building a wooden bench for a gazebo.

Construction material and tools

To make a bench we will need:

Sergey Kudravets with a board

Boards (can be unedged);
A circular saw;
Milling cutter;
Grinder with grinding wheel;
Screwdriver;
Self-tapping screws.

What parts does the bench consist of?

All the work consists of making four parts of a bench from a board, and then connecting them all. To create a shop you will need to cut out:

Table top (seat);
Jumper (ligation);
Two legs.

All parts are shown in the photo below. Before you start working with wood, you need to create a drawing of the bench you need. “Whatever” size will not fit, it is necessary to take the dimensions from the gazebo, and then design our product.

Components of the shop

Video

Below are two approaches to making a bench (amateur) and a bench (professional). Both items are made in-house from classic building material- wood, but the approaches are completely different, as is the end result itself.

The first video will show the shop described above. This video will teach you how to do it yourself. The second is more for self-development, because not everyone has a workshop at hand in which they can create (in the good sense of the word) such things.

Amateur approach

The video is presented by the channel " Workshop of Sergei Kudravets" In it, Sergey talks in detail about how to make a reliable and reliable one from an unedged pine board. a simple bench. The above list of building materials and tools was made based on this video.

Professional approach

An amazing video instruction in which the author shows the entire process of making a wooden bench. The channel is called " Adventures of the Woodies", the author very pleasantly shares information with the audience, and the process of work itself is simply fascinating. I personally watched it just for self-development. I was very impressed with how aesthetically everything was cut, folded and attached.

And the point is not even that it is very convenient and functional, but that the garden bench has always been almost the main element of decoration personal plot. In order for the bench to fit perfectly into the overall appearance of the garden and at the same time retain its functionality, it would not be amiss to take a closer look at this piece of “garden interior”.

Garden bench materials

Modern benches are made from both classic materials - wood, stone, wrought iron, marble, and more modern ones - plastic, synthetic fiber. Often benches can be made simultaneously from two or more materials - stone and iron, wood and glass, forged steel and wood. The style in which this item is made depends on this. This means that it is necessary to select a bench for the garden taking into account its stylistic features. For example, a bench made of stone or forged steel and wood will fit perfectly into a garden designed in classic style, and a plastic bench will look great on the lawn in front of the cottage in modern style.

But still, the most popular material The wood used to make the garden bench is wood. In particular, teak is most often used. Teak wood has always been used in shipbuilding because it is very resistant to moisture. On fresh air A gray coating appears on teak furniture, which can be easily removed with a soft brush. In addition, teak furniture must be treated with teak oil, which comes with the furniture - this way the furniture will last for many years.

Manufacturers garden furniture often they do not limit themselves to the production of just benches, but produce entire ensembles of garden furniture. In addition to benches, it includes a table, chairs, swings, chests for storing pillows - and all this, made in the same style, will be an amazing decoration for any garden.

Where to put a garden bench

If you plan to place only single benches in the garden, then you should definitely place one bench at the porch - this will be a wonderful sign of hospitality, and if you place another bench somewhere in the depths of the garden, under a spreading tree, then this place will become a wonderful corner for solitude and rest in silence.

Of course, the bench primarily plays a functional role. Therefore, you should pay special attention to its dimensions. For example, if a bench is installed in a part of the garden where family barbecue gatherings take place, then the bench there should be long, or several small benches, so that all family members and guests can sit comfortably. But if we ignore the true functional purpose of the bench, then it’s worth paying attention to psychological aspects its use.

According to psychologists, sitting on a bench together can reconcile quarreling spouses and establish friendship with a pleasant interlocutor. And the secret of this is that when people sit on a bench, their gaze covers the same landscape, they breathe the same air, their thoughts and feelings gradually begin to flow in the same direction.

Garden benches - photo

But as for the shape of the bench, now there are many of them and you can choose any one to suit your taste. Let's say there is a huge spreading tree with a wide trunk growing in the garden. You can install a round bench around it so that those sitting have their backs to the tree trunk. But if you build a beautiful round flower bed or a small fountain, then a round bench will fit perfectly there, only those sitting will already be facing the center of the composition. Round benches are very convenient because they can accommodate many people without taking up much space.

Anyone who has installed a bench, or even several, in their garden can say with confidence that they have received another unique room, cozy corner your home, where it is always pleasant to relax and spend time with loved ones. The only difference is that this corner is open air.

DIY bench around a tree

A bench with several seats can be a logical end to a flower bed or surround a tree in the garden. A couple of days of work - and the new vacation spot is ready!

For work you will need patterns decorative details, you can use our option or develop the form yourself. The presented bench is suitable for trees with a trunk up to 45-50 cm thick!

The template for the decorative strips is based on a 5 x 5 cm grid. Draw the cells on the wood, and then transfer a smooth line.

The shortest seat board is made with a special recess so that the inclined backrests fit exactly against it. To do this, attach two slats to the part, which has already been sawn off at both ends with a 60° bevel, as a guide for marking. The rail placed on top should be the size of the back, the second rail serves only as a support.
Starting from the back corner, mark the thickness of the back (3.5 cm).
Since the angle of the backrest is 100°, it is necessary to check the notch with the angle of the part.
Using a carpenter's square, mark a 100° angle as shown in the photo. Then use a hacksaw to cut out a complex “wedge”.
A board with two slats will serve as a template for mounting the seats.
To ensure that all six seats are the same, refer to the template.
For decorative strips, you will need a grid template that can be used to process all six boards.
Make the holes with a Forstner drill.
Round the edges with the top bit.
Mount the backrest.
Coat the parts with a protective wood primer and paint them with enamel.

Garden bench - photo ideas

Benches and benches in the garden summer cottage is a popular holiday destination. Sometimes putting up an ordinary bench is not interesting and banal.

After all, it is possible to build a whole corner for relaxation and comfort, so that you can not just sit on a bench, but already enjoy nature, your garden, and the fruits you planted with your own hands. There are many different ideas here.

The construction of benches is usually lightweight and does not require special skills. Anyone can create a relaxation corner with a bench, if they wish.

Options for ideas

Everyone has seen the photo of an ordinary bench. But you don’t want the simplest bench for your garden; you want something more original and beautiful.

If everything in your garden is already decorated and the whole area is in order, then a bench will never become superfluous. And, if you are just starting to equip your site, then it’s time to start with equipping a bench.

Wooden bench

A DIY wooden bench will harmonize well in the garden with all sorts of flower beds of beautiful flowers.

The simplest option for building a garden bench is two wooden boxes in which inflorescences grow, and between them a couple of sanded boards. If necessary, this bench can be placed near the wall, if possible.

Many people don’t like material like wood, because it gets wet quickly and is very difficult to care for. Instead of wooden material stone and concrete come to the rescue.

In order to make a bench with a back, you need to try a little. For the backrest, they most often buy already treated wood. The easiest way to secure the seat is with metal corners.

They can be attached to concrete material using dowels, and to wooden material using self-tapping screws from the bottom or through bolts.

Many summer residents are wondering how to make a bench on their own for their home and garden. And every year this question is gaining popularity.

Many people give preference to shop benches that are already ready, but by doing the work yourself, you can completely surrender to the process and use your imagination completely.

Metal bench

Metal benches are installed by a minority, since they, of course, are aesthetic and original products, but in summer time– this is a material that heats up to crazy temperatures, and if it gets even a little colder, the material becomes icy, and it is impossible to sit on it.

If you really want to use metal in the process of creating a bench, then you should combine two materials in the work: metal and wood. At the same time, the seats and backrests are made of wooden material, and the designs of the legs and additional elements are created on the basis of metal.

There are many different original options benches in this style.

Note!

Great popularity in Lately We got benches from pipes. From profile pipe using boiling, rectangles are made, and jumpers are attached to the side walls, on which the bench seats will rest. This is a very reliable and safe option for creating a bench with your own hands.

If this option is slightly improved, then armrests are used for greater convenience and comfort. A bench in the garden with a wide seat, like a sofa, will also look elegant and original. This is comfort, convenience and luxury!

For complete comfort, you can put decorated pillows on such benches so that you can not only sit, but also take a nap in nature.

Benches made of boards

A simple bench made of boards will also look aesthetically pleasing, the main thing is to know how to make it. There are the most simple designs, like ordinary benches, but there are more complicated ones in the form of a sofa or an elongated chair.

In a modern style, such a bench is easy to assemble; you just need to connect rectangles with partitions made of thin boards together.

The main thing is to turn on your imagination. Even the most simple work can become the source of a masterpiece.

Note!

On the basis of thin boards it is possible to make various shapes benches. For example, in the shape of the letter P. The main thing here is to fix the seats and legs well and securely. This bench is easy to make, but will last a long time.

DIY bench photo

Note!

You built a house in general outline plot. It is already known where they will be located outbuildings, where there is a garden and vegetable garden, where there is a playground and a recreational area. It's time to start improving individual areas. Among other things, you will need a bench for your garden.

Bench as an element of landscape design

Benches for a summer residence made of metal and wood are Street furniture for relax. (And sometimes not only outdoor use: in Russian country style interiors, garden benches made of wood can be used in living rooms instead of chairs.) Like any item in the house or on the property, a garden bench is at the same time decorative element, so you should consider not only its structure, but also its appearance.

The installation location of the bench is where it is needed and does not interfere. First of all - in the recreation area: in the garden, near the flower garden, children's playground. But not only: as furniture for relaxation, garden benches are also installed where you have to walk or work: along the path, on the edge of the garden, in the utility yard, near the garage.

Garden benches for a summer residence can be installed:

This can be a stand-alone design or in combination with garden table. In the recreation area, near the children's playground, you can arrange an original swing bench. Finally, some of the garden benches may be permanent, while others may be foldable and/or portable.

When choosing a location, consider the lighting: if the shop is open, without a canopy or ceiling, you will not be able to use it in hot weather.

Style selection

Wherever you install them, country benches should correspond to the general area. After all, even working areas - a vegetable garden or a utility yard - are also part of the whole landscape design. Here are some combination options:

for decoration in Russian country style, a zavalinka near the house is suitable (a zavalinka was a thickening in the lower part village house, where the insulation was poured).
Bench “on the heap”
You can also put together a wooden bench for a summer house from halves of logs and logs, decorate the back and armrests with carved decorative overlays with folklore stories.
in any country-style garden, beautiful benches woven from branches, bast, and willow look good;
in European historical styles - Gothic, Baroque, Rococo - elements of forging are welcome. Forged benches for the garden – openwork back, armrests, metal legs– go well with wrought iron garden gates, weather vanes, arches, and fountain fencing.
The forging pattern depends on the overall design project and must correspond to the chosen direction. For example, in the Empire design, cast iron benches with a floral pattern look organic.
IN Gothic style a garden bench with a back in the form of pointed peaks will fit well;
for decoration in antique or neoclassical style the best option– semicircular marble bench. Combines with the same columns, porticoes, sculptures;
V Mediterranean styles bright is welcome color palette. Designer benches are installed next to flowering bush, under grapevines, framed by flower beds. Ceramic decorations and additional lighting in the evening are welcome;
modern benches, in avant-garde design, can be made from polymer pipes, from of stainless steel.
You can make a swing from an old one car tire. There are no restrictions on the use of plastic garden furniture;
a metal bench can be made of profiled stainless steel, suitable for urban style

You can design in the spirit of a specific country and/or historical era: wrought iron garden benches in an English Victorian park, in Versailles, etc. On the following photos unusual designer benches are shown. Perhaps they will give you some unique ideas of your own.

Constructions

There are many design options. Popular types of benches:

no back, only legs and seat;
bench with back;
with armrests;
foldable;
swing;
with canopy/awning;
table with benches;
with step for feet;
with rods for lanterns;
with flower beds on the sides;
analogue of a rocking chair.

Advice! If you have a large linden or oak tree on your site, you can make a round bench around the trunk, for the full perimeter or partially. In this case, the tree itself will serve as the backrest.

Materials

Benches can be made from different materials, including from improvised:

bench made of wood. The most popular option. Even if the main part of the structure is made of stone or metal, the seat is most often made of polished wooden boards - it is warm and smooth. You can use bamboo stems instead of wood;
wicker furniture is sold ready-made, it can also be made with your own hands from twigs or wicker;
you can make a removable seat or pillow from textiles. Fixed items can only be used if your product is protected from precipitation. As an option - leatherette or PVC, they are not afraid of moisture;
metal benches. These can be hand-made or custom-made forged elements, as well as a homemade bench from a profile pipe.
stone. For example, natural boulders as supports. You can carve a whole product out of stone if you know how to work with it. The stone is cold, but in hot weather it accumulates heat and does not cool down for a long time;
plastic. Ready kit garden furniture can be purchased in the store: benches, chairs, tables. If you want to original product, you can make the main frame from PVC pipes, and the back from facade or basement siding;
car tires. The simplest version of a swing is to hang the camera with two cables on the branch of a strong tree;
hollow concrete blocks instead of legs. Their base should be concreted into the platform, and wooden poles should be placed in the holes, from which the seat is formed (see photo above);
a suitable material for making a garden bench made of wood is cargo pallets (pallets). One fabric is for the seat, the other is for the back. Legs and armrests are made of timber;
a canopy for a bench can be made from cellular polycarbonate, tarpaulin, canvas, PVC, corrugated sheeting, wooden boards, stainless steel. The roof can be made different shapes, including arched.

Other material available on the farm will also be suitable. Selection conditions:

sufficient strength, load-bearing capacity;
safety – avoid injuries due to sharp edges and other design nuances;
for stationary furniture – resistance to precipitation, frost, ultraviolet radiation;
harmonious combination with the design of the site.

Important! If there are small children in the family, all lines garden designs It’s better to make it smooth so that the child doesn’t get hurt on a sharp corner.

Manufacturing Features

There are as many technologies as there are varieties. We will look at some rules for making a classic wooden bench. Regular sizes:

bench height (distance from the seat to the ground) – half a meter or a little less;
back height – 0.3-0.5 meters;
The seat width is half a meter or more.

The length can be any, depending on how many seats you are counting on. The number of legs also depends on this: if the bench made of boards is very long, it is better to install intermediate legs, otherwise the seat will sag.

Before starting work, draw a drawing indicating all the details, dimensions, and back slope. Based on the drawing, calculate the amount of material. It is advisable to determine in advance:

for a wooden bench with a back - the method of attaching the back;
stationary bench or portable? In the first case, it needs to be strengthened in the ground - the legs should be sunk into small holes;
will there be armrests?
Whether there will be a canopy or autonomous lighting, it is better to provide supports for them in the design.

Advice! If you have a garden bench made of a profile pipe, stone or concrete, it is recommended to cement the legs.

DIY wooden bench

As an example, here are a few sketches for making wooden benches.

To work you will need:

wooden board and/or timber;
fastening hardware - depending on the method of fastening: screws, nails, staples, bolts, metal corners;
paint, stain or varnish, wood glue;
antiseptic for wood processing;
tools: tape measure, plane, saw, hammer, nail puller, drill, emery cloth.

Eat different ways parts connections:

fastening with nails, bolts, screws;
tongue-and-groove connection: grooves are cut out in some parts into which other parts are placed. The cuts are made in places where they will not reduce the load-bearing capacity of the product;
fastening with hardware and corners. This method is used to connect parts located in perpendicular planes: the sides of the corner are fastened each in its own plane and fixed with self-tapping screws/nails;
To create an adjustable/folding backrest, you will need hinges or movable hinges.

Things to consider:

the wood must be pre-treated with an antiseptic so that it does not rot or become infected with fungus;
hardware is chosen from stainless steel or galvanized to avoid the appearance of rust, which weakens fasteners, destroys wood, and spoils the appearance of the product;
During the manufacturing process, you need to ensure that the dimensions are strictly observed to avoid distortions.

Procedure:

Cut out the parts in accordance with the drawing, sand the sections.
Polish the surface with a plane.
Mark the attachment points on the workpieces.
Depending on the mounting method, drill holes for hardware or make cuts.
Coat the fastening points with glue.
Connect the parts and wait for the glue to dry.
Paint ready product, coat with varnish or stain.

Conclusion

There are countless options for garden benches. You can buy ready-made ones, match them to the style of your garden, or make them. Note that if you design and make a bench for your dacha with your own hands, there will be a one-piece product on your site that none of your neighbors have. And if you have special talents - wood carving, forging - then it’s also exquisite.

Sections