Door to the gazebo: ideas from sliding systems to wooden gates. Sliding glass doors for verandas, terraces, gazebos The price of sliding portals depends on

home

Scud

The door to the gazebo may not be ordinary wood or iron with standard hinges. At the moment, there are various modifications designed for any connoisseur. Therefore, you should not stop at simple version, and decorate the gazebo with some unusual device.

Popular types of doors to the gazebo

There are many options for doors that can be equipped with a gazebo. They differ in designs and materials.

Did you know? The oldest door still in use today is in England. It is not known for certain who made it and when, but according to measurements made by scientists, it was produced in the 19th century.

Example of the most popular:

Sliding (sliding) doors with aluminum profile. Mainly used for large buildings, but can also be installed on small structures. It is assembled from several sections that move to one side.
Accordion folding doors. Not to be confused with sliding ones, they do not move apart, but fold. Each leaf consists of several sections that move from top to bottom.
American. It is made in the form of hinged wooden doors in the style of American saloons from the times of cowboys. Suitable for a non-glazed version of the gazebo.
Polycarbonate door. This material is usually used in greenhouses. This is a budget option, but if you approach this with the right skill, you will get a decent design that you can make with your own hands.
Radial. Mounted on gazebos shaped like a circle. Made from glass and curved rails. This option is expensive and they are placed on a curved door portal.

Sliding

This view in Lately is starting to gain popularity. It is mounted on glazed gazebos, as it has the ability to close tightly and not let in cold air.

There are several types of such portals:

Sliding. The functionality of this design is similar to that installed in trolleybuses. The canvas moves towards the opening one and to the side. This door is equipped with a special lock that can lock it in any position convenient for the owner.
Shifting along the rise. To open such a door, you must first lift it slightly up. It differs in that when closing, sealing mechanisms are activated that reliably close the portal.
Folding. It has 2-3 doors that fold like an accordion. The good thing is that when closed it completely clears the passage. The downside is poor thermal insulation.

Price sliding portals depends on:

material;
size;
installation (on your own or not);
Scenery;
types of structures.

Accordion (folding)

Folding portals differ in types and design options. By type of device they are divided into:

consisting of narrow lamellas and a panel base;
having two guides.

If the first type of device has rollers at the bottom, thanks to which it opens and closes, then the second is equipped with synchronizers that have the ability to move more smoothly and close better.

Important! Accordion-folding doors have one big advantage - their compactness, so such products are best used in small buildings.

Varieties of such doors are divided according to the materials from which they were made:

Wooden. The most environmentally friendly variety. In its manufacture, oak, veneer or pressed shavings can be used, it all depends on the financial capabilities of the owner of the gazebo.
Plastic. Plastic products have two advantages - low price and big choice. They can be any color and decorated in any way. In addition, they are quite durable and are not susceptible to weather and mechanical stress. But the sound and heat insulation of this material is not up to par.
Glass. Used to close wide portals. They look rich, can be matte or mosaic. You can also apply a colored film or sandblasting pattern to glass surfaces. They transmit light well, making them suitable for gazebos located in a shady place. They are not fussy to care for, but they have two disadvantages: high price and heavy weight.
Textile. In the gazebos they perform cleanly decorative function. Even if the fabric in the sections is very dense, it performs noise and any other insulating functions poorly. The only thing it is good for is keeping flying insects out of the glassed room in the evening. This option can be used as a “temporary” option until something more suitable is purchased.

How to make a polycarbonate sliding door

Polycarbonate material is good because it can be used to make any type of portal - sliding, hinged, frameless and framed. Having selected the desired option, you can begin to create it.

Important! When installing doors into a polycarbonate gazebo, it is necessary to take into account the thermal deformation of this material. Without this, the canvas may deteriorate or tear in winter.

The actual construction of sliding doors from polycarbonate material is divided into a number of simple steps:

Cutting sheets. Can be produced circular saw or an ordinary construction knife. The main thing is to correctly measure the desired piece of fabric and cover it along the edges with adhesive tape in order to avoid contamination.
Drilling. This work can be done with a regular metal drill. But it must be new or practically unused. Holes should be made between the stiffeners. It is also necessary that they are at least 0.5 cm away from the edges.
Fasteners. The polycarbonate material is fastened with ordinary self-tapping screws or thermal washers. The latter are more preferable, as they have a latch, which improves the tightness during fastening.
Sealing. Produced with perforation tape or aluminum self-adhesive. It must be done at the ends of the sheet to prevent contamination and condensation.

Required materials and tools

The standard set of tools and materials for creating polycarbonate sliding doors includes:

self-tapping screws and thermal washers;
electric drill with a set of drills;
polycarbonate sheet;
metal corners;
level and tape measure;
awnings;
wooden beam;
device for cutting polycarbonate.

Creation technology

For creating sliding door a certain algorithm should be performed:

Measure the material and doorway.
Mount the frame.
Cover the door leaf.
Install awnings.
Install the portal.

Work on measuring the entrance opening is mandatory, since the main canvas is created using them. Its corners should be even to avoid distortions during further use. Before sheathing the canvas, you can paint it, but before that you should sand the surface.

Installation Features

Installation of a sliding door should begin with the installation of a guide mechanism.

Did you know? The heaviest door on globe installed at the California National Laboratory. Its height is 2.5 m and its weight is 312 tons.

The step-by-step process itself should be carried out as follows:

Installation of the guide mechanism.
Mounting rings on polycarbonate sheet.
Painting the canvas.
Installing the door structure to the guides.
Carrying out sound insulation.

The doors in the gazebo can look different. Currently, there is a wide selection of materials and designs for door leaf. The choice depends on the preferences and financial capabilities of the owner.

Sliding glass doors are characterized by a number of advantages: they save space, have beautiful view and easy to maintain. They visually increase the volume of the room and have good aesthetic qualities.

Sliding glass systems are ergonomic, functional, and original. They can be made according to individual project, but standard ones are cheaper. Glass doors give a modern look, lightness to the room, and improve lighting. They fit well into the interior of the gazebo, creating comfort, convenience and coziness.

Types of doors by design and filling

Installing doors in a gazebo

By design they are distinguished:

Single doors
Single-leaf with side parts or with a fixed component
Bivalve
Double-leaf with movable or fixed leaves
Radial.

Radius sliding glass doors fit perfectly into gazebos with round shapes. This is an expensive option, because you need to make curved rails and a curved door leaf. This sophisticated option impresses with its originality and comfort.

Various glasses are used for doors: tinted, frosted, stained glass, decorated. Canvases with a pattern that is applied are also used various methods. A unique design can be created using a stencil or decor. An original decoration element: doors with mosaics, three-dimensional decorative elements. Sometimes a film is glued that differs both in texture and in a variety of colors.

Acrylic, tempered, impact-resistant, triplex - these are the types of glass used depending on the strength characteristics. The use of special glass, which shatters into small fragments upon impact, saves you from serious injuries. Durability and safety are important advantages.

Glass doors are framed in aluminum, wood, plastic, or can be frameless. Used for gazebo aluminum profile in order to increase strength.

The aluminum sash has good load-bearing qualities. With its help it is possible to produce structures of considerable size and different color, because painting is possible. Glazing without a frame: stylish, original, fits into a gazebo of any architecture and offers an excellent view.

Advantages and principle of operation of sliding doors

Self installation doors in the gazebo

Main advantages of glass doors:

Space saving
Easy opening
No thresholds (if there is no bottom guide)
Self-opening resistance
Versatility
Safety.

Sliding glass structures have the same operating principle as sliding wardrobes: they are held on top by carriages and moved apart in different directions. A sliding door is perfect for a gazebo. Reliability, practicality, and original design ensure comfort and safety.

The door structure consists of a roller mechanism, glass and guides. There may be several of them. The kit also includes fittings, decorative panels, trims. The fittings are used of a certain type: they should not protrude above the surface so that the structure can move to the side or into a niche. The guides and roller mechanism are selected taking into account the number of leaves, weight and type of door.

Glass doors are quite heavy and you need to choose a strong and reliable mechanism. The guides for the gazebo must be secured at both the top and bottom so that the structure ensures safety.

Tools and components used to install doors

Door handles, rollers, rails, fasteners, stops, bolts - the main components.

The following tools are used for work:

Screwdriver
Roulette
Drill
Level
Polyurethane foam
Mounting kit.

Do-it-yourself door installation

You can install the doors yourself if you buy the necessary components and have knowledge of installation technology.

First you need to mark and install guides along the marked lines (on the ceiling and on the floor). They must be strictly horizontal and longer than the opening to eliminate the possibility of the doors falling off.

Glass doors have fasteners made of metal claws with internal rubber pads. The glass is secured with screws. The roller mechanism can be hidden behind a decorative strip.

The installation of sliding doors is discussed in detail in the video:

Operating procedure:

Doorway measurement
Installation of the bottom rail with checking for unevenness with a level
Complete set of the canvas with fasteners from the bottom and top
Installing the top bar
Attaching the guides to the plank using self-tapping screws or dowels
Installation of locking pads
Attaching a decorative panel to improve appearance
Installation of accessories.

For glass doors, handles made of anodized aluminum or stainless steel are used to ensure reliability and durability. Modern sliding doors are equipped with handles different forms with recesses.

The glass is brought to the upper guide and suspended. While tilting the glass, make sure that each roller engages. Next, the canvas is joined to the bottom guide. The doors are moved and opened several times to check that they move smoothly and are not distorted.

You should not buy sliding doors in small organizations, which will not be able to provide decent quality. Good manufacturer must provide a guarantee. Low cost is a reason not to trust the company, because glass structures are not cheap.

Sliding doors are stylish, convenient and beautiful. They are very popular because they are not only beautiful, but also functional. The ability to move apart in different directions and quickly change the environment allows you to install sliding doors as a successful and practical element of the interior. But if they are not installed correctly, they can rattle, move unevenly or jam.

That's why sliding mechanism you need to choose carefully.

The possibility of transformation from a closed space to an open one, a huge choice of design, panoramic views, safety, durability, ease of maintenance - all these advantages allow you to use sliding structures as great decoration summer cottage plot.

See how to make a pergola from old doors. From them you can make a gazebo, a washbasin, a tool shed, and from the windows you can make a greenhouse.

The content of the article:

The new summer season has begun. Those who love to work and relax in the fresh air have longed for their hacienda over the winter, are looking for new ideas for inspiration, and are happy to implement them. To ensure that you have enough funds for all your ideas, use items that have served their time as materials. Using old doors you can make a pergola, a shed for equipment, a toilet, a gazebo, and a washbasin.

How to make a pergola with your own hands?

If you don't know what this design is, then read about it now. The word “pergola” comes from Latin and Italian words and means “building”, “canopy”. It is created for beauty, so that climbing plants can freely weave along this structure, protecting people from the scorching sun when they walk along this terrace.

The design consists of sections of arches, which are connected into a single structure by transverse beams. Pergolas can be attached to buildings; they will decorate open terraces. Sometimes they are attached to gazebos or pergolas are built.

If you have a lot of material, then you can make a larger structure. If you changed your balcony or interior doors and didn’t throw away the old ones, then give them the opportunity to decorate your dacha.

Such a pergola in landscape design looks wonderful, to make it you will need:

two doors;
White paint;
primer;
sandpaper;
brush;
boards;
self-tapping screws;
screwdriver;
crushed stone.

To remove from the doors old paint, use a special solution to remove such coating. You can put newspaper on the surface, iron it with an iron, after which the layer is removed with a spatula.

Sand the prepared surface; if it is not smooth, first go over it with wood putty. Once it dries, make the surface smoother with sandpaper, then prime the canvas and cover with 2-3 layers of paint.

These prepared blanks are connected by vertical crossbars. If you have a jigsaw, then shape them in the same way as in the photo, if not, just cut them to size. Make two notches in these crossbars on each side, put them on the doors, and secure them on the sides with screws.

To make the structure more durable, connect the parts at the top with boards sawn off at an angle of 45 degrees. They and the horizontal rafters also need to be painted. This pergola is installed on crushed stone; if you want to place it near the veranda, then attach it to a wooden floor.

Corner brackets can be used as fasteners. If you don’t want to bother with preparing the door and painting it, you can, on the contrary, artificially age it.

If you have roof elements left from construction, then connect the doors using them. Below you can fix the pergola on a wooden pallet using corners. Then it won't touch the ground, and wooden parts will not rot.

If you want to not only admire such a structure, but also have the opportunity to sit there and relax, then take:

4 door leaves;
four figured brackets;
self-tapping screws;
fastening metal corners;
white paint and brush.

Attach the top sheet to the vertical ones using openwork brackets of a contrasting color, and in the center using the corners. Also use the corners to secure horizontal door as a shop. This design must be installed on concrete base or on crushed stone so that the lower door leaves do not touch the ground.

By the way, if you like an openwork design and don’t want to spend a lot of time with painting, look at how to make a pergola using carved pillars and balusters.

Each of the two pairs of carved pillars must be connected by railings and balusters at the top and bottom. A small gable roof is made on top, which unites the right and left walls of the pergola. It is decorated with carved elements.

You can plant climbing plants outside one and the second wall or attach boxes and place flowers in them. The interior space can be used, done here small shop. To do this, beams or corner brackets are attached to walls 1 and 2.

There are other ideas for using old doors.

How to make a sink for a summer house from old doors?

To make one, take:

door;
bars;
planks;
fasteners;
table top;
hooks;
two figured brackets.

Making master class:

Two bars will become the front legs of the sink. Choose from four boards for the table base. You need to cut a recess in the countertop in the shape of a sink, place it here, and place a container underneath, which will need to be poured out periodically. You can install a flexible hose under the sink and lead it into a drainage system or ditch so that water flows there.
Four boards are fixed to the lower parts of the legs, and four more are stuffed onto them, which will become the lower table. Attach hooks at the top to hang towels and small garden tools.
2 openwork corners are attached even higher. A shelf is fixed on them, on which flower pots are placed.

You can put 4 beams perpendicular to the door so that inner dimensions were the same as a large sink. Such a washbasin for a summer house will be spacious. Here you can wash not only your hands, but also dishes.

The old door in the next photo also easily turned into a country washbasin.

If you don’t want to cut a hole in the countertop and install a washbasin, then make a comfortable table with shelves from the door leaf.

This makes it convenient to do small gardening tasks: picking seedlings, planting flowers in pots. You can attach hooks to the door and hang a small garden tools so that it is at hand.

It’s not difficult to make a flower girl out of an old washbasin. After attaching it to the door, pour soil here and plant plants.

Such a door doesn’t even need to be painted, just put it against the wall, but for better fixation, you can make hinges at the top, drive nails into the wall or attach self-tapping screws, and put hinges on them.

If you also have an old window that you hate to throw away, you can turn it into one of the sides of a table or washbasin.

Gazebo design made of doors and wood

To create such a vacation spot, you will need:

five doors;
floorboards;
hinges for doors;
metal corners;
self-tapping screws;
a small sheet of corrugated board;
4 beams;
crushed stone.

Creation plan:

Level the area for the future building, pour crushed stone here, and use 4 beams to make a base for the floor. Place boards on top of it.
Connect two doors that will become the back wall. Using metal corners and self-tapping screws, attach two more panels to it at an angle of 90 degrees. These doors will become the sides.
These panels have glass, but for the top door you must use a door without glass. You need to place it at a slight angle so that the water drains and the snow melts away. To do this, either use side doors that are taller than those that became the back wall, or attach angled timbers to these side elements.
Fix a sheet of corrugated sheeting on top so that it is slightly larger than the gazebo on all sides. You can use another roofing material. The bottom of the door can be attached to the floor, also using corners.

This design of the gazebo allows you to use recycled materials and save a lot of money.

The next structure is also created based on the door. There are 3 panels installed at the back and one on each side. Since this structure is slightly larger than the previous one, boards need to be attached to the ceiling, but you can fix the remaining doors here transversely, using them as the base of the roof.

To give rigidity to the structure, timber with a cross-section of 100 or 150 mm is placed at the corners; the structure must first be fastened at the bottom with floor fixing elements, and at the top? roof details. It’s nice to sit in such a gazebo without doors in the heat; here you can hide from the rain, since the roof will not let you get wet.

This structure will appeal to both adults and children.

By the way, we can recommend the following design to the kids. Of course, the doors must first be well connected to each other or securely fixed near the fence.

Various shelves and hooks are nailed onto them, where children can hang and put their toys and belongings. And adults can attach flower boxes to similar structures to decorate the area. You can fix the slate board and write messages to each other on it in chalk.

Even a lonely door painted in White color, will become an excellent design element for a dacha if you attach a box to it and plant flowering plants in it.

Even if you only have the base of the canvas left, there is no longer glass and a plywood partition on it, such a door will still serve. At the bottom the box is fixed on it, and at the top the flowerpot is hung on a hook.

This vertical gardening is perfect for a gazebo, as you can place flowers with reverse side this building. It’s nice to sit in such a building in the fresh air and admire the colorful colors of the plants.

But let’s return to our topic to see what other gazebo design there could be.

Four canvases will become the sides and back wall, and the fifth will turn into roof of the lung buildings. As you can see, the doors don't have to be painted to give this corner dachas easy a touch of antiquity.

It seems that the following structure has also been on this site for many 10 years.

For his back wall uses door panels, but old windows are suitable for the side panels. Unpainted board gray is hammered in as roof elements, the first one needs to be nailed at the bottom of the slope, the next ones are gradually attached on top so that each one located above overlaps the previous one by 1-2 cm. Then the rain will not penetrate inside.

You can also use the doors to make a small shed for storing tools. For it you will need:

four doors;
boards;
bars;
roofing material;
fastening tools.

Make a base from four bars, place it on cement slabs, fill the boards at the top, place 3 door panels here, secure them at the corners and at the bottom with corners and self-tapping screws. Attach two bars vertically to the front panel. Screw to one of them door hinges, steam rooms need to be fixed on the door.

Nail four bars on top, fasten the rafters to them, fill the boards, and fasten the sheet of the roofing element.

You will get a pergola-pergola if you make a structure like this.

The doors can be used as side walls; inside there is a bench on which a mattress is placed so that you can sit on a soft one or lie down. climbing plants planted behind the side walls. This corner of the dacha looks amazing.

The next pergola is made in white and pink tones. Two doors without glass are suitable for it. If they have plywood underneath, leave it, if not, stuff boards in there. The slats are nailed to the top of the door at an angle of 45 degrees perpendicular to each other.

The gable roof is made from rafters, with boards placed on top. A bed is fixed inside. All this charm is covered with pink and white paint. All that remains is to secure the flower boxes outside, put soft pillows on the bench, and hang two tulle curtains at the entrance.

You can make a small garden greenhouse out of glass doors, look how amazing it looks.

Old windows will make a wonderful, reliable greenhouse. It is better to cover this issue in more detail.

How to make a greenhouse from windows yourself?

It will also require recycled material left over after the renovation. If you have glass doors, get them. If you don't have them, you can use a door frame and attach glass inside. Windows are perfect for your next mini-greenhouse.

Before you make a greenhouse yourself, see if you have:

cement blocks or bricks;
bars;
sand;
self-tapping screws;
there are enough windows.

The evenness of the horizontal structure during construction must be checked using a level, and adjustments must be made if necessary.

First of all, you need to level the site on which you will build. Remove the turf around the perimeter to a small height, pour sand here. Place blocks or bricks on top; it is better to connect them with cement mortar.
When it dries, place slats on top along the perimeter, fastening them with corners and screws.
Now the bars are vertically attached to this wooden base; the distance between two adjacent ones should be equal to the width of the window. At the next stage, you will need to insert them here and secure them to the side with self-tapping screws.
Now place the horizontal beams on top and also connect them together. Do not fill in the small side wall on one side yet, as this will be the entrance.
Mark on the upper horizontal beams where you need to make small recesses for the rafters, make them. Secure the roof base on top. For this you can also use glass frames or durable cellophane. If you don’t want to remove it for the winter, then it’s better to fix transparent polycarbonate here. From this and from the frames you will make doors.

Here's how to properly make a greenhouse from scrap materials. You found out how many ideas for a summer house old doors and windows can give.

In conclusion, look at the intricacies of building a greenhouse from window frames. This may be useful for summer residents.

You will also probably be interested in a video review that tells how to assemble a gazebo structure alone.

September 17, 2016
Specialization: master in construction plasterboard structures, finishing works and styling floor coverings. Installation of door and window units, finishing of facades, installation of electrical, plumbing and heating - I can give detailed advice on all types of work.

If you have a gazebo on your site, then the issue of protecting the space from adverse weather influences and wind requires the closest attention. In this review, I will talk about several options for solving the problem; they differ very much in design, cost, and protective characteristics. You need to decide which solution will be optimal: either sliding windows for a gazebo, or fixed glazing, or simpler and cheaper soft PVC materials.

Overview of main solutions

I will tell you about several options, and they will be considered from simple to more complex and expensive. You need to get acquainted with all of them and choose the one that will satisfy all your requirements and will not be too expensive financially. Of course, and appearance will vary, so the aesthetic side of the issue should also not be overlooked.

Option No. 1 - structures from old windows

A do-it-yourself gazebo made from previously used window frames is the cheapest solution, since the main elements can be found almost free of charge or for minimal money. The most important thing here is to find a sufficient number of frames, and if you succeeded, then this section will tell you how to build a place for a summer vacation out of them.

If almost all other options require a ready-made gazebo, then in this case it can be quickly built from scratch.

For construction you will need the following materials:

Materials	Purpose
Old windows	It is best that they are the same size, this will significantly simplify the workflow and improve the appearance of the final result. The products should be quite durable; it is better not to take rotten frames, as they will not last you long
Wood block	With its help, the frame of the structure will be constructed, as well as the connection of all elements to each other. Minimum section 50x50 or more - it is important that the elements can withstand high loads and ensure the reliability of the future structure
Concrete blocks	They will serve as the base of the gazebo; a beam will be placed on them, which will eliminate its contact with the ground and extend the service life of the entire structure. The number of elements is calculated individually in each specific case, taking into account the size of the structure
Board	It is needed to construct the floor, and can also be used to sew up the bottom, although window frames from bottom to top can be used
Fasteners	To connect all the elements into a single whole, self-tapping screws and perforated corners with stiffeners are used. These modern solutions are much more reliable than conventional nails, in addition, their use speeds up the construction process
Dye	Since old frames and untreated wooden blocks will be used during the work, all surfaces must be painted to protect them from atmospheric influences.

You also cannot do without a certain set of tools:

A hand saw for sawing bars and boards or a power tool for the same purpose;

A screwdriver with a set of bits for the screws used;
Tape measure and square for marking. The level will help to level the structure.

As for the workflow, it consists of several stages:

First, the site for construction is cleared, the site is cleared of debris and leveled. The base must be strong so that subsequently individual parts of the structure do not sag;
Then concrete blocks are laid out, usually they are located in the corners and in the middle of the walls. To ensure that the elements stand in their place, they can be slightly deepened into the ground;
The surface of the blocks is covered with roofing felt, after which it is assembled - its lower part and vertical corner posts, the position of which is fixed using braces. All elements are fastened together using reinforced perforated corners and self-tapping screws, this is both reliable and fast;

Next, the window frames are placed and secured, they are fixed to the beam from above and below; if the sizes of the elements are different, then the resulting voids are covered with a board or other available material - for example, plywood. Another beam is placed on top, after which the structure is reinforced with jumpers. If there are gaps between the frames, the easiest way is to fill them with polyurethane foam and cover them with slats;

As for the roof, it can be the most different designs, from the simplest single-pitch version and slate to gable systems or semicircular roofs made of metal pipes and polycarbonate. The last option is more difficult to implement, but you will get an original and, importantly, light-transmitting roof;

Lastly, the structure is painted in a certain color - a structure made of multi-colored parts does not look very good. If your gazebo is assembled entirely from windows, then bottom part glazing can also be painted over.

Such a structure will cost you a couple of thousand rubles, or even cheaper, because you can adapt the materials that are at hand. Naturally, it is better to glaze a gazebo from old window frames before assembling it; I advise removing all the glass, then placing them on silicone and securing them with new glazing beads.

The frames can be quickly and reliably fastened together using perforated plates; this is especially convenient if you need to further strengthen the structure; a bar on top and bottom may not be enough.

Option No. 2 - soft windows

This type of product is otherwise called “flexible windows” and has the following features:

The openings are closed with elastic PVC material, which, if necessary, can be quickly removed to admire the beauty of nature;
The light transmittance of the structure is 90%, which is quite enough to provide high-quality natural lighting;

The service life of the material is about 10 years, which is also important;
The price of the material is 1500-1800 rubles per square meter, it is much cheaper than other ready-made options;
You can also order a door made of a material that closes with a zipper and provides excellent protection against mosquitoes and other insects.

Here, naturally, you should already have a ready-made gazebo. To close it with flexible windows, you need to follow a few simple steps:

First, you need to take measurements of the openings in order to determine the dimensions of future elements. They must extend onto the surface of the gazebo, because fasteners will be installed there;
Next, soft PVC windows of the required configuration are ordered, all the nuances will be advised to you by the manufacturing company, only the exact dimensions are required from you;
Fixing windows is very simple: special metal elements, which are inserted into the eyes and secured with a strap. The eyelet is attached to the base using screws or dowels - it all depends on what your gazebo is made of. The work can be done on your own, it’s not difficult, and the savings will be about 15,000 rubles, which is what installers charge on average for installation;

When the eyelets are in place, you can attach flexible windows; everything is very simple and very fast.

If you cannot decide how to close the openings in the gazebo, then this option may be ideal solution due to simplicity and practicality.

Option No. 3 – polycarbonate windows

This one is lightweight and inexpensive material appeared relatively recently, but has already gained great popularity both in roofing work and when closing openings in gazebos, this is due to several factors:

The material is lightweight, which makes it easier to work with;
The cost per square meter is about 250 rubles, which makes polycarbonate accessible to a wide range of buyers;
The range of colors is quite wide;
The design looks very good and lasts about 15 years.

As for the features of using this material, they are as follows:

To assemble a reliable and attractive structure, a special aluminum profile is used; from it you can quickly build a strong and lightweight frame into which polycarbonate is inserted. The profile is ordered in linear meters and is calculated individually in each specific case;

If you are sheathing the gazebo completely, the material can be attached directly to the frame using special self-tapping screws with rubber washers. In this case, the ends of the polycarbonate must be covered with end strips that are glued to the silicone, this prevents the accumulation of dirt inside the voids;

You can make sliding windows from polycarbonate for a gazebo; in this case, the frames are placed on guides along which they will move in one or two directions. There are many design options: from simple plastic profile to roller systems, choose what is more convenient for you;
The flexibility of polycarbonate makes it the only option for semicircular gazebos, because you can attach it to difficult surfaces yourself. This way you can make a dome-shaped gazebo.

You can also use monolithic polycarbonate, which resembles glass, but unlike it is flexible. It is better to use options with a thickness of 3-4 mm; a sheet of such material measuring 2x3 meters will cost from 6500 to 8500 rubles; as you can see, this type of product is much more expensive than budget cellular polycarbonate.

Option No. 4 – sliding frames made of aluminum

This type of structure, such as sliding aluminum frames, is widely used on balconies, but they can also be used in gazebos with great success, because the design is easy to use, light in weight, looks very good and perfectly withstands adverse weather conditions. Moreover, both windows and doors can be made from aluminum, which will give the gazebo lightness and simplicity..

As for the implementation of the project, I will consider it in general terms:

First of all, it is necessary to measure the openings; it is better to have this work performed by specialists, since any errors will lead to the need to order a new design;
When ordering, it is better to choose options on rollers; they work much easier and much more reliably than simple frames on guides. It is better to read people's reviews about a particular company in order to choose the best manufacturer in your region;

It is better to entrust the installation work to specialists, since any errors in the process lead to distortions in the structure, and it will not work correctly or the sashes will not move at all. There is an additional cost involved, but for the best results, it's better to spend a little more.

Option No. 5 – PVC windows

I’ll say right away that this is the most expensive solution, but if you want to use the gazebo during the cold season, then this type of glazing is best suited. Thermal insulation characteristics plastic double-glazed windows are an order of magnitude higher than any of the above options, so they should be installed on permanent structures so that it does not turn out that the windows are warmer than the walls.

To glaze a structure with plastic windows, you need to use a simple algorithm:

First of all, the openings are measured; if you do this, remember that there should be a gap of 2-3 centimeters on each side, this will allow you to clearly set the position of the windows and insulate the gap with foam;
Then you need to order the double-glazed windows themselves; I advise you to carefully choose the manufacturer, since there are many options and not all of them have high quality. Give preference to brands with a good reputation, there are many of them, and they are represented in each region different variants. High-quality products will cost you from 4,000 per square meter and above; it is better not to consider cheap options;
You can completely build a gazebo from plastic windows, more precisely from a PVC profile. This is not the cheapest solution, but its implementation is very simple: they will make a design for you the right size and shapes, and the only thing you have to build yourself is the roof; the easiest way is to make it from wood.

If you decide to build a gazebo from plastic, then I advise you to cover the lower part of the structure not with double-glazed windows, but with blind elements; they are much more reliable and will withstand even strong impacts without any problems.

Conclusion

You must decide what purpose the windows should serve, if you want an open structure in the summer, then flexible gazebo windows will be the best solution, and if necessary as much as possible high-quality insulation, That plastic double glazed windows will fit best. The video in this article will help you understand individual nuances even better, and if you want to clarify any questions, then ask them in the comments under the review.

Until recently, polycarbonate was used for the construction of greenhouses, shower cabins, canopies, etc. But today, it has become possible to build sliding doors from polycarbonate with your own hands, which will look very stylish and bring modernity to the interior of the house. Polycarbonate sheets are produced in a wide range color scheme, which can suit any design solution.

Advantages

The advantages of polycarbonate are as follows:

lightness, feeling of airiness;
higher reliability compared to glass;
safety - if cracked, it does not crumble into small fragments;
ease of care.

Taking into account such features, sliding doors made from polycarbonate will serve for a long time and will delight the owners with their durability.

Doors can be built in two versions: hanging and sliding. The second option is the most common. Sliding doors have a compartment design. Those. their doors move apart along the wall. To make such doors, you need to decide whether they will have a frame or not. Metal, wood or plastic structures are often used as a frame. With the frameless type, no other materials are used to create the door, with the exception of polycarbonate itself.

Required Tools

To figure out how to make a polycarbonate sliding door on your own, you need to understand that creating a door without a frame will take a lot of material costs than creating a frame door, but it also looks much richer. There are no difficulties in manufacturing, but the material you need is basic:

electric drill and drill bits;
screwdriver (screwdriver);
tape measure and level;
cutting machine (jigsaw);
square

If the door is framed, then you must have:

polycarbonate sheet (you can use pieces ready-made according to the size of the openings);
corners made of metal or polymer (for the opening);
self-tapping screws and angles for attaching frame sides;
fasteners for the box.

Doors without a frame are secured using one fastener and polycarbonate sheets.

Stages of creating a polycarbonate sliding door

The opening is measured taking into account that the frame is made one to one and a half centimeters smaller than the opening in order to close tightly and not touch the box.
The rectangularity of the wooden opening is measured with special care using a square. If you make mistakes at this stage, the door simply will not fit into the opening. For metal and plastic, this is not necessary.
The frame of beams is assembled using metal corners.
The assembled frame of their wood is sanded and treated with varnish (or stain) for an aesthetic appearance.
Keep in mind that the frame can be made using an old canvas, on which the bars are placed around the perimeter and the necessary measurements are taken. Then, using a jigsaw, the frame is assembled and the polycarbonate sheet is attached with self-tapping screws.
For greater aesthetics, self-tapping screws with decorative caps are used.
Afterwards, canopies are attached to the frame and frame to install the door and, finally, the structure itself is mounted.

Thanks to the lightness of the material, this work can be done even by one person. The frameless option is even simpler: a polycarbonate sheet is applied to the old door leaf and cut to the desired size.

To assemble sliding doors you need the following tools:

the polycarbonate sheet is five to six centimeters larger than the opening;
a metal guide tube twice the width of the opening;
fasteners and anchors;
list of previous materials.

Installation starts with retractable design– guide. The tube is attached at a height of five or ten centimeters above the opening. One half is attached above the door opening, the other is shifted in the direction of movement of the door along the plane.

Afterwards, rings are attached to the polycarbonate sheet. For this purpose, fasteners are used. They are screwed to move the door along the guide. The door should be one to one and a half millimeters from the floor. If there is a threshold, the canvas is lowered slightly below it. This will allow the door to close more tightly.

Restrictions are set on the guide at the ends. In this case, the rings with the polymer are hung on the guide. If necessary, handles are attached to the sheet. Once the mount door handles finished, we can say that it is modern and stylish door, which is also durable and safe, is now installed in your home! In addition, you can be proud that the doors are made by yourself!

Polycarbonate material today is one of the best, if not the best option, to bring the most daring ideas to life. At the same time, the costs of installing the door and purchasing materials are minimal! Take your tools with confidence.

DIY polycarbonate sliding doors, All about polycarbonate - All about polycarbonate

If you want to do quality doors made of polymer, then read our article carefully, we will tell you how to create durable doors on your own.

Polycarbonate doors: how to make

Remarkable appearance, light weight, as well as a lower price compared to glass, make polycarbonate very attractive not only for the construction of verandas, greenhouses, transparent roofs and partitions, but also for filling door panels. So what if it’s a polymer material?

But it does not break and does not crumble into fragments, which makes the operation of structures made from it safe. In addition, making polycarbonate doors with your own hands is much easier than any other option. This is exactly what the video in this article will talk about, and its theoretical part will supplement the information with some details.

Glass substitute: polycarbonate

Polycarbonate is an engineered synthetic sheet material, which can be operated at quite extreme temperatures. Therefore, it is equally suitable for both indoor and outdoor use. street structures– you just need to choose the appropriate option.

Features and advantages of the material

Of course, polycarbonate cannot compare with glass in terms of translucency, so it cannot replace it, for example, in windows. But, thanks to its flexibility, it helps designers develop interesting designs with a curved shape - for example: sliding canopies over a terrace or swimming pool.

There are two types of polycarbonate, the main difference of which is their different structure:

First option- These are thin double panels connected to each other by jumpers that form cells in the thickness of the material. Because of this, this type of polycarbonate is called “cellular”.
Another variety polycarbonate, due to its continuous structure it is called monolithic. In appearance, the sheets are very similar to glass, and can have a thickness of 0.2 to 2 cm. They are almost as transparent, which can be seen even in the photo, which is why panels with a monolithic structure are most often used for the construction of partitions and glazing interior doors.

A monolithic sheet does not bend as well as cellular polycarbonate, which can even be rolled, but if necessary, it is given a spherical shape using hot molding. Due to its dense structure, the material has higher strength and can even serve as a frameless self-supporting floor.

The standard width of a polycarbonate sheet is 2.05 m. The length can vary significantly, but the minimum is 3m. The popularity of the material is also facilitated by the rich color range of the material.

It can be transparent or matte, have a bronze tint, or match all the colors of the rainbow. Manufacturers usually guarantee 10 years of quality preservation, but in fact polycarbonate lasts much longer.

Translucent doors

Polycarbonate can be inserted into hinged swing doors, or serve as a filler for folding or sliding doors. The former are attached to the slopes by means of hinges, the latter move on rollers along a guide rail located above the opening or mounted in the floor.

The door leaves are made of polycarbonate and can be frameless. In this case, it has no frame, and all fittings are attached to a polymer sheet. It is clear that if there is no frame, then the polycarbonate itself must ensure the rigidity of the structure. In such cases, only a monolithic version with sufficient thickness is used.

This door is not cheap, but it looks very solid. Sheets with a honeycomb structure are less durable and too light for frameless doors, so they are used only to fill plastic, aluminum or wooden frames.

Fabrication

It is almost impossible to make a frameless door from polycarbonate so that it looks decent in the interior. Perhaps it will be a sliding door in a closet or pantry.

If you give preference to the frame method, then for independent work Only the wooden version is suitable. In this case, polycarbonate plays the role of glass, and is inserted into the frame in the most usual way, by attaching fragments cut to size with a glazing bead.

Basically, our readers are interested in the question: “How to make polycarbonate doors in a greenhouse?” To do this, you just need instructions for installing this material, which can be found without difficulty. In principle, it will be required if the entire greenhouse is assembled from polymer sheets. As for the door, the main task here is to correctly manufacture the door frame so that it fits exactly into the opening.

Note! If the greenhouse itself is not factory-made, but was built independently on a metal frame, then the frame of the canvas must also be made of metal. To do this, you can take aluminum profile pipe size 30/2 mm or 40/3 mm. If the greenhouse is built of wood, then for the door frame it is best to take pine beams with a cross-section of 50*50 mm.

Then the frame is sheathed on one or both sides with cellular polycarbonate. To ensure timely drainage of condensate, the sheets are oriented so that the longitudinal channels are located along the height of the door. The material itself is quite easy to process. They cut it with a regular hacksaw, and before installing the fasteners, pre-drill holes.

For better rigidity, it is better to divide the frame of the door leaf in the center with a crossbar, even two.

Thus, if you do not have a solid sheet of polycarbonate that matches the frame in size, the door trim can be assembled from two pieces and joined at the center. Using hinges, the frame of the greenhouse door leaf is hung on the racks, the latches are screwed on the inside and outside - that’s the whole door.

Polycarbonate doors for greenhouses and more, Door Guide

But it does not break and does not crumble into fragments, which makes the operation of structures made from it safe. In addition, make polycarbonate doors with your own hands

How to make polycarbonate doors: master class

Polycarbonate is most often used in summer cottages, in the construction of canopies, canopies, and greenhouses, which require the most material. However, today a new direction in design has emerged - the installation of interior doors made from this inexpensive, but stylish and reliable material.

Door to the greenhouse

Use of polycarbonate

Before designers developed exclusive products made from polycarbonate, this material was widely used to create shower enclosures. This was very convenient and practical, since such products are much easier to make from such plates than from anything else. For example, this material is much lighter and safer than glass.

Two types of doors are made from polycarbonate:

mounted;
sliding

The first type looks more traditional. Such structures are secured using canopies, which are located in the box. The second type is a coupe version and can have one or two doors. These doors open along the plane of the wall.

In addition, there is another classification, according to which interior door structures are divided into:

frame;
frameless.

Frame ones are made in the form of a frame. You can install a polycarbonate plate into it yourself, as shown in the video. In this case, the frame can be either metal or plastic. For wooden frame experts recommend using wood such as poplar, since this species is quite light.

The second type - frameless - belongs to a special, elite class. Such doors consist entirely of polycarbonate sheets, while the frame and sheet are solid. They look more strict and at the same time richer, so the financial costs are much higher than in the previous case.

Manufacturing process

To make such products with your own hands you will need various instruments And Consumables. Polycarbonate does not require too careful processing, so it is not necessary to stock up on specific equipment. The following tools will suffice for the job:

electric drill (plus a set of drills of different sizes);
ruler and tape measure;
a machine designed for cutting material at an angle.

Depending on the type of structure, different parts may be needed. These can be self-tapping screws, plastic or metal corners, etc. For a frameless structure, you will only need to prepare a polycarbonate sheet and several canopies.

The manufacturing process is carried out in the following sequence. First, you should take measurements of the opening in which the structure is installed. Based on the calculation results, it is necessary to make a frame, and its size should be reduced by approximately 1 mm. This is necessary to ensure that the structures close tightly.

When creating a frame, you need to carefully monitor the corners. To avoid such distortions as in the photo, they must be strictly straight. To do this, the finished frame is tightened using metal corners. Before the structure is covered with sheathing, the material is treated with varnish. In this case, all surfaces (inside and outside) must be thoroughly sanded. You can use stain during the painting process.

To simplify the process of calculating a new door, it is recommended to take the data on the old one as a basis, if it is preserved somewhere. The carefully prepared frame is sheathed with polycarbonate, after which the canopies are prepared. You need to fix them with your own hands immediately on the doors, and then on the frame, as shown in the photo. The last stage is directly installing the door itself. Thanks to this design much easier than others, this can be done easily without resorting to anyone’s help.

Installation of a sliding structure

The sliding design is a little more complicated than the hinged one. To make it yourself, you should install the guide mechanism shown in the photo. Thanks to it, the doors will move along the walls. Among the advantages are:

minimum area in the room when open;
reliable insulation (if the device is single-leaf).

During the manufacturing process you will need anchors, as well as special fasteners. A metal tube is also required, which is fixed approximately 7-10 cm above the opening. Then you need to attach several rings to the polycarbonate sheet. They must move along the guide. They should be secured, as shown in the photo, to the tube so that the sheet is located at a mark located 1.5 mm above the floor.

The sliding design has many other advantages that increase the comfort of the room. For example, such products do not close on their own due to a draft, and are also easy to open due to the design of the doors. Moreover, thanks to modern technologies sliding structure can be automated.

Polycarbonate door designs

The attractive appearance of polycarbonate, a large selection of colors and ease of processing have long been discovered ample opportunities for its use in interior design. Polycarbonate used for constructing interior partitions, screens for zoning internal space and furniture parts.

Doors made of polycarbonate have become especially popular lately. A door leaf made of synthetic polymer has the following characteristics:

extraordinary lightness. Thanks to this, the process of installing structures becomes convenient and simple;
the synthetic polymer is very durable, which affects the ease of installation door design, and on the convenience of its further operation;
high degree of security. Even if damaged, polycarbonate does not form traumatic fragments and does not crumble like glass;
wide possibilities for design. Depending on the type of polycarbonate, doors can be completely or partially transparent, have different colors and shades. If necessary, you can choose a matte version of the material.

Types of polycarbonate doors

According to the method of operation of the opening mechanism, the design of doors made of synthetic polymer can be hinged and sliding. The hinged design involves attaching the door leaf to the jamb using awnings. Sliding doors open and close parallel to the wall plane using a special guide mechanism.

Doors from polymer material can be framed or frameless.

The option with a frame requires the presence of a polycarbonate glazing frame. The frame can be metal, plastic or wood. The frame should provide rigidity to the door structure, but at the same time be as light as possible. Frames made of aluminum profiles go well with polycarbonate.

The frameless design, accordingly, has no frame. In this case, all hanging elements and fittings are attached directly to the polymer sheet. To ensure rigidity and give the structure the necessary weight, monolithic polycarbonate is usually used for frameless doors. This door design looks strict and solid, but also costs more.

Making polycarbonate doors yourself

To make polycarbonate doors with your own hands, you don’t need great experience carpentry works. Since polycarbonate is a material that can be easily processed, the performer will only need to carefully and accurately perform a sequence of simple steps.

Assembly and installation hinged door

Making a hinged door begins with determining exact dimensions designs. If you plan to install a polycarbonate door to replace an old door, then the task is simplified, since the old door will serve as a template for making a new one. If the door is being installed for the first time, then first careful measurements must be taken opening. It must be remembered that the door dimensions must be smaller sizes opening by 1-2 mm to ensure the opening and closing process.

After determining the dimensions, you can begin to manufacture the frame of the door structure. When assembling the support frame, it is necessary to strictly maintain right angles to avoid distortion and jamming of the door during further operation.

If the frame is wooden, the required rigidity can be achieved by tightening the corners of the structure with special metal corners. When the assembly of the frame is completed, you need to carefully polish its surface, paint or coat it with colorless varnish.

Polycarbonate can be attached to the frame either on both sides, or in one layer in the center. Double-sided fastening will give the door greater rigidity, but the material installed in the center of the frame will look much more sophisticated.

To attach polycarbonate in one layer as a frame, it is better to use an aluminum profile. After installing the polymer material, you need to attach the awnings, handles and lock. The process of installing a door on an awning is simple due to the fact that a polycarbonate door is very light in weight.

Sliding system

The design and installation of sliding doors, on the one hand, is a more complex and expensive process due to the fact that a larger number of parts and fittings are used. On the other hand, almost all the parts of this system are included in the complete set, and the installation process itself is very technological and consists of several well-controlled stages.

The operating mechanism of sliding doors is completely identical to the operating mechanism of sliding wardrobe doors. The system consists of an upper guide, which holds the door leaf in a vertical position, and a lower rail along which the door moves using support rollers. In some designs sliding systems the bottom rail is missing, and the door leaf is suspended from the top rail.

When installing doors sliding type Particular attention should be paid to the horizontal installation of the upper and lower guide systems, since the entire operation of the mechanism in the future depends on this.

Installation of fittings on the door leaf must be carried out according to the instructions for the kit of parts. Although the composition of the kits may vary, in general they include: a roller spring system for fixing the door leaf in the upper rail, support rollers or wheels for installing the door on the lower rail, latches and door travel limiters.

After installing the polycarbonate sliding door into the guides, it is necessary to adjust the position of the door leaf. The adjustment is made special screws, included in the design of the lower support rollers. By rotating the screws, you need to eliminate all distortions of the door leaf and achieve its even position vertically and horizontally.

Polycarbonate doors, their types and self-installation

Doors made of polycarbonate are a beautiful, durable and lightweight structure that every owner can make and install with their own hands.

Sections