Cheap and good fence. What to make an inexpensive garden fence from
It is very important that at the dacha the eye enjoys not only the plantings, but also the surrounding environment. About, and we have already talked about, it’s time to talk about how to make fences for your dacha with your own hands. Settlement without them dacha area is not possible and therefore it is better to take care of creating a strong and good fence. And it’s even better that it fits into the overall picture of what you create on your site.
DIY garden fences cheap
Don’t let the length of the fence or its height bother you. Let's start with the fact that it is easy to make a fence with your own hands and quite inexpensively, because if you have the desire and basic knowledge of the “fence theory”, then you can safely move on to the next stage - the choice of materials.
Country fencing can be made from:
- wood;
- picket fence;
- metal profiles;
- grids;
- yes everything, anything!
You just have to choose what you like best and fits into the overall design.
Wooden garden fence
Wood is one of the the best materials. It looks noble, can withstand bad weather, can be purchased without problems, and at the same time it is environmentally friendly.
It is not necessary to purchase a pre-prepared board. Just take out the supplies and scraps that have accumulated in the backyard and are still suitable for use - for example, ranch fences allow the use of uncut and uneven boards. You only need to dig in wooden poles along the intended path and nail the boards to them in a horizontal position.
It's quite simple and cheap fence for a summer residence, and if you take into account its environmental friendliness, then you should give preference to just such fencing.
In addition, depending on the length of the board, you yourself choose its direction, so you can build either a ranch fence or a simple vertical or horizontal fence, which has long proven itself.
To install a wooden fence with your own hands you will need:
- beam;
- boards;
- nails;
- hammer;
- shovel;
- sand.
If desired, you can add cement and bitumen to this list if you want the timber to be installed as stably as possible.
The principle of installing a wooden fence is very simple. You dig holes to install the support beam and fill them with cement or cover them tightly with sand, compacting it. This way the supports will not deform under the load of the boards and will become more stable.
Next, all you have to do is nail the boards to the posts. If you want to attach the boards vertically, then you will have to stretch and nail two planks between the supports, onto which the boards will then be attached. If you still want to see a ranch fence on your property, then it is enough to immediately attach the boards from pillar to post. More details in the video Ivan Galkin:
Just don’t forget that wood has its own shelf life and doesn’t like moisture. Therefore, be sure to paint the fence after construction and periodically inspect it for damage in order to repair or replace the board in time.
Picket fence
Picket fences are the most popular type of wooden fence. And no wonder, because the picket fence is so easy to install, economical to purchase and beautiful when finished.
Before starting construction, it is necessary to mark the area where the building will be located, determine its height and the frequency of installing the picket fence. Although we install a fence for protection, if we tightly close the area, we can deprive the plants of light, which will lead to crop failure.
The set of materials for building a picket fence is similar to what we presented above:
- timber for supports;
- board for horizontal screed;
- cement;
- sand;
- nails or screws.
Tools can be different - from a shovel with a hammer to a screwdriver and an electric drill. Only the speed of construction will depend on this, but not the quality of the fence.
First you need to install the pillars, which will become the basis of the fence. Therefore, dig holes for the timber at an equal distance from each other, but no further than the length of the board that will serve as a screed. After this, install the supports and fill them with cement mortar.
While the solution hardens (and this will take at least 3 days), you can proceed to the installation of sections. To do this, we cut the board to a length sufficient to attach its ends to the support. We place the sections on supports using nails or self-tapping screws and then attach a picket fence to them at an equal distance.
As you can see, the process of building a fence is quite simple and does not require any special construction skills - just patience to wait for the solution to harden. Then you can create a fence to your liking.
Well, to understand the intricacies of working with a picket fence and its installation, we recommend watching a video master class Andrey Krylov:
Metal profile fence
And yet, despite the beauty and cheapness of the picket fence and wood in general, it has one drawback - such a fence is short-lived and its maximum service life is only 15 years. Therefore, many, wanting to save money, are looking for a more durable, affordable and strong material - metal profiles.
Due to its strength and availability, corrugated sheeting has long been wide application from summer residents. It is used for garden beds, roofing and, of course, fencing.
Metal profiles do not have the most aesthetic appearance, so most designers categorically bypass corrugated sheets when creating beautiful and original fences. But its accessibility and ease of use plays into the hands of summer residents, allowing them to good fence for a do-it-yourself dacha.
The construction of such a fence is not much different from others. You will need the same support posts and boards for the horizontal screed, on which the profile itself will be attached.
And since metal profiles are still not the most popular material for creating a fence, it’s worth dwelling a little on basic requirements for its installation:
- The distance between supports should not exceed 2.5 meters. It’s better to stick to a more frequent, half-meter installation. This is due to the fact that the profiled sheet is quite flexible and will be deformed under the pressure of the wind, losing its beauty and, most importantly, strength. Therefore, the shorter the sections, the better the quality of the fence.
- The supports must be buried at least 1.5 meters into the ground. Despite the flexibility of the metal profile, the sheet itself is quite heavy and requires stable support. That is why it is recommended to cement all supports at the base.
- It is best to use not a beam as a post, but a pipe with a diameter of 6-8 cm and a wall thickness of at least 2 mm; such supports will definitely become a good basis for a stable and strong fence.
- It is recommended to use 3 horizontal logs when installing the profile - top, bottom and middle. This way the fence will be more resistant to deformation and will better hold its shape under any pressure.
And so that you can be convinced of the simplicity of building such a fence, we invite you to watch the channel’s video master class We do it ourselves 36, where they share with us all the tricks of working with metal profiles:
Mesh fence for a summer residence
And yet one of the most budget options considered a chain-link fence. Like any metal product, the mesh tolerates most natural phenomena. And even rust can be prevented timely processing. Therefore, fences made from it are quite durable.
Fence mesh comes in several types:
- Chainlink, which is sold in rolls, treated with polymers to prevent corrosion and can be easily installed between posts without unnecessary partitions,
- Grooved, formed from wire with a cross section of 6-7 mm and bent by a wave. It has a strong weave. And thanks to it, it keeps its shape well.
- Welded, has a smaller wire cross-section than in the case of corrugated wire, but due to welding it is stronger. True, using it for a fence will be more expensive than in the case of chain-link.
A fence from any mesh can be made in two different ways:
- Stretch the fabric around the perimeter and attach it to the support posts.
- Stretch the mesh over the frame, and then assemble the fence from the resulting sections.
Allows you to keep track of your pets
Both methods have their own characteristics, so it is impossible to single out one of them as more profitable or simpler.
So, for example, by simply stretching the mesh from pillar to post, you will reduce the time for preparing materials. After all, you will only need to drive in the support, determine the height of the future fence and stretch the mesh, attaching it to the posts with wire.
This method is easy to implement and practical if you are short on time and want to make a temporary fence.
And yet it is worth considering that for a chain-link mesh, the posts will have to be placed at intervals of 1.5-2 meters, and this will increase the budget for the material. While for a corrugated mesh a distance of 3-4 meters is sufficient.
But if there are differences in height on your site, then this is the only solution if you have chosen mesh as the material. Sections are already prepared frames from metal profile, which brings us to the limitation - if you install them descending, there will be open space under the fence, which does not provide either security or aesthetic beauty site.
Installation of sections is simpler than stretching the mesh fabric. Ready-made frames are simply attached to the installed poles, equipped with the necessary anchors, or even welded to them.
As you can see, the choice of grid and method depends entirely on your desire to improve the area, the time you have and, of course, the budget allocated for this.
To figure out which material is right for you, you can take a look at a detailed master class on selecting materials and installing them in a fence.
If you want more clarity and understanding of how to do everything correctly, with explanations from an experienced master, then you should watch the video tutorial from the channel RemontHelp.com:
The grid itself consists of cells, i.e. your area will be clearly visible from the street. Therefore it is usually recommended to use this material only between areas, so as not to block the plantings from light.
Original ideas for a fence at the dacha from scrap materials
Every practical summer resident will consider it his duty to save as much as possible and use everything that remains from other projects. Therefore, before you start building a fence with your own hands, we suggest you think about whether it’s worth rushing to the store to buy a mesh or picket fence? Maybe we can make do with improvised materials?
Then let's see what we have accumulated over the entire time we owned the dacha? And is it possible to make decent fences out of this trash?
There is only one answer - yes, you can.
AND car tires, and , and the covers from them can become a fence or its decoration. Moreover, it will be no worse or more boring than one assembled from high-quality materials.
Tire fence
Let's start with tires, for example. A lot of this stuff always accumulates, so over time the question arises of where to put it. Recycling costs money, but the fence will also bring benefits. The choice is obvious.
Somewhat eclectic
All that remains is to fill the area well and begin to install the tires on top of each other in a checkerboard pattern, as if laying out bricks, or secure them to a previously installed chain-link fence.
By the way, if you build a fence from tires according to the pyramid principle, then the soil in the protruding parts can be used for flower beds, thus creating an entire green wall.
Fence made of plastic bottles
Plastic can be considered an ideal material for a fence. After all, it decomposes in at least 60 years, which means that a fence made from it will not suffer from rain or sun. Although bottle plastic is still soft, and its shape at first glance is not suitable for building a fence, many began to give it a chance and use it for other purposes.
To enclose your entire summer cottage with such a “plastic fence”, you will need to accumulate a lot of bottles to create a full-fledged fence.
The low weight of the material makes it easily deformed from physical damage. In addition, if you have accumulated mostly transparent bottles, then such a fence will not provide protection from prying eyes. But the cost finished fence will be small.
If you combine bottles different color, then you can assemble entire mosaics. That's why creative personalities agree to endure shortcomings for the sake of an original fence that attracts the attention of passers-by.
To create a complete fence from plastic bottles It is recommended to take the same size of material. And it can already be assembled into a wall, stringing it on a wire like a curtain, or placing it on top of each other, filling the voids with cement mortar. The result will depend entirely on your desire to strengthen the fence or make it more airy.
By the way, bottle caps will also be used. After all, you can make a movable fence from them, and even with any pattern.
This will require a lot of caps with four drilled holes and meters of wire. Based on the colors you have, choose a pattern, and better diagram for embroidery with beads, and then simply string the lids in order, as in embroidery, in rows. Then pass the wire through the vertical holes, thus connecting the rows.
If you're just bored old fence, and you still want to put the covers into use, then simply screw them on with self-tapping screws, creating a bright pattern-panel on the fence. And now you already have interesting wall on the site, attracting the attention of kids and pleasing your eyes.
A master class from Soloremont.
However, an ordinary picket fence or an old picket fence can simply be painted in an original way.
Fun pencils
You create your own mood and desire to visit the dacha more often!
Do-it-yourself wattle fence in the country: a master class for lovers of rural romance
And if you have ever seen a Ukrainian farm or met huts in the south of Russia, then your heart could not remain indifferent to this peaceful romance. And it’s not even these dear ones that sink into your soul, as if toy houses, with a thatched roof and whitewashed walls, and a wicker fence with clay hanging upside down on it.
And yet, in addition to the decorative component, the wattle fence is perfect solution even for modern dacha. Such a fence is not inferior in strength to either wood or metal. And in terms of beauty and attractiveness it will rank first among them.
And from the point of view of economy, it fits well into our criteria. After all, weaving such a fence will allow you to realize your creative side, and will also save your budget.
Flowers are clearly visible
But first, it’s worth preparing the material:
- timber or logs as a support and basis for weaving;
- material for weaving (preference is given to willow twigs, although twigs of other trees are also suitable, the main condition is their plasticity);
- gloves;
- shovel;
- sand.
If you are going to weave along already driven posts, then first dig them in and cover them with sand and compact them. After that you can start working on the rods themselves. It is necessary to steam the rods so that they become more flexible and do not break when deformed.
You can weave in different ways:
- horizontally, passing the rods in a figure eight between the pillars. This method was borrowed from weavers;
- vertically, between horizontally located logs. This weaving turns out to be more decorative than practical. That is why it is used for fences between adjacent areas, but not external ones;
- diagonally, forming an original wooden mesh. This type of weaving is the most labor-intensive, because the rods must be long for the fence to be at least of medium height. In addition, it is recommended to dig each rod into the ground for greater stability.
To understand the intricacies of simple weaving and try to make your first wattle fence, we recommend taking a look at the video tutorial Oleg Bryukhanov, where he shares the secrets of creating a simple but beautiful fence.
If you prefer a fence made of sections, then the master class will be useful for you Yury Kulakevich, where he shows how to create a wicker wicker base.
As you can see, a fence is not just a protective structure that hides a summer cottage from prying eyes, lovers of other people’s harvests and stray dogs. A fence created with your own hands is also a decoration of the territory, allowing you to enjoy every day spent in nature, among the plants we planted with great love.
When you get tired of the city noise and bustle, small summer houses. Some are building solid ones, where you can go to relax even in winter, while others are using the site for a garden. In any situation, the question arises, which fences to choose for your dacha. Photos, materials, creative ideas and – all this will be presented in full below. The fencing of the territory is often due to the rules of the cooperative or the need to create a barrier from the roadway. Based on the purpose of constructing the fence, the type, material and height of the structure are selected. Let's talk about all this in more detail.
When choosing a fence for a summer house based on a photograph, it is difficult to evaluate it practical side. Therefore, first you should decide on the types of fencing, and then look through all sorts of catalogs with photo examples of finished work.
![](https://i2.wp.com/homius.ru/wp-content/uploads/2017/05/47-3.jpg)
There are many types of fences, here are the main subgroups:
- Plastic structures. Modern models, allowing you to make a fence at your dacha inexpensively, will last a long time: the plastic does not corrode and is resistant to temperature changes. There are options, completely or made with gaps from figured elements.
- Wooden fences. The most common options. But such structures have one drawback - the wood must be treated with agents against mold and rot so that it lasts longer without losing its appearance.
![](https://i0.wp.com/homius.ru/wp-content/uploads/2017/06/4-2.jpg)
- Concrete options. The reliability and strength of concrete fences can be seen from afar, but in many dacha cooperatives it is prohibited to use fences that tightly block the area. The construction of the structure will require more money, but it will also last a very long time, recouping the costs.
- Fences from (Euro-variants). They are attractive due to their beauty and durability, but the cost is high, so not every summer resident can afford such a fence.
![](https://i2.wp.com/homius.ru/wp-content/uploads/2017/06/6-2.jpg)
- Polycarbonate- cheap and cheerful. This can be used not only in greenhouses and greenhouses artificial material. It is not exposed to moisture or corrosion, and it is not afraid of severe frosts. The price is affordable, and the sheets can be secured to a metal frame.
- Metal constructions They are characterized by increased strength and are very diverse in design. You can make both a high and low fence with or without gaps. Elite options include custom-made forged structures.
![](https://i2.wp.com/homius.ru/wp-content/uploads/2017/06/8-2.jpg)
- Profiled sheet- the most popular option due to its affordable cost and ease of installation. Galvanized metal sheets coated with paint of different colors are used. Such structures will reliably hide the area from prying eyes. Disadvantage - if there are chips and scratches on the sheet, the corrosion process may begin.
![](https://i2.wp.com/homius.ru/wp-content/uploads/2017/06/9-2.jpg)
- Rabitz- a simple option for cooperatives when you cannot block your plot from prying eyes. It is used in protected summer cottages, is affordable and easy to install.
![](https://i1.wp.com/homius.ru/wp-content/uploads/2017/06/10-2.jpg)
- Hedge- a universal, beautiful and durable option. Can be used as decoration on the site itself.
![](https://i0.wp.com/homius.ru/wp-content/uploads/2017/06/11-2.jpg)
When choosing a fence for a summer cottage, you should first of all rely on the requirements of the cooperative, otherwise reliable design with impenetrable walls will have to be dismantled.
Related article:
You can create a similar decor from trees, climbing crops and shrubs. If you don’t yet know what plants you want to plant, then our review will help you make the right decision.
How to choose fences for your dacha: photos of interesting options
Based on the variety of options, the question arises of which fence to choose for your dacha. At summer cottages, cooperatives have their own rules:
- the height of the fence should not exceed 1.5 m; in some cooperatives it is mandatory to leave transparency;
![](https://i2.wp.com/homius.ru/wp-content/uploads/2017/06/12-2.jpg)
- a dense fence should be at a distance of 1 m from the border with the neighboring plot;
- if it is necessary to build a fence with a height of 2 m, it is necessary to agree this decision with the chairman of the cooperative;
- If the holiday village has an approved general fencing plan, the construction of your own fence will also require approval.
![](https://i2.wp.com/homius.ru/wp-content/uploads/2017/06/13-2.jpg)
To decide on a specific model of a country fence or think about how to build it, you should consider several nuances:
- Climatic conditions and landscape. For sloped areas there are special methods installation and alignment of fences. In climates with severe frosts, you need to choose a material that is resistant to cold.
- Material of manufacture. For large areas, preference is given to wood, metal, concrete or brick. To protect small area, corrugated sheets, plastic or polycarbonate are good options. hedge can be planted around the perimeter of any area.
![](https://i2.wp.com/homius.ru/wp-content/uploads/2017/06/14-2.jpg)
- Dimensions and transparency. The indicators are based on the requirements for fencing in a holiday village.
- Lifetime. Choose the optimal price-quality ratio, then the design will last a long time and retain its presentation.
- Price. If you want to save money on fencing your territory, you can make a fence with your own hands from available materials.
![](https://i0.wp.com/homius.ru/wp-content/uploads/2017/06/15-2.jpg)
Any option must first of all be practical, because the purpose of the fence is to protect against unauthorized entry into your territory.
We build fences from scrap materials with our own hands: photos of finished creations
A variety of manufacturing materials and models allows you to find a suitable fence for every consumer. If you want materials and work to be cheap, DIY fences for your dacha are the right option for you.
![](https://i2.wp.com/homius.ru/wp-content/uploads/2017/06/16-2.jpg)
By design, any fence consists of sheathing and frame ( load-bearing structures). The materials for the cladding are chosen at your discretion, and the supporting vertical pillars, fixed into the ground using a concrete mixture, are usually made of durable metal or stone; there are concrete options.
To properly build a fence with your own hands, you should pay attention to several aspects:
- Soil type. The maximum weight of the structure, as well as the required foundation, depends on this indicator.
- How much strong wind . If the area is open and there are frequent storm warnings, then it is better to choose a loose option or make a good and strong foundation.
![](https://i1.wp.com/homius.ru/wp-content/uploads/2017/06/17-2.jpg)
- External component. In most cases, owners country houses they try to preserve the commonality of the compositional design and the fence.
If you decide to build a fence with your own hands, photos of fences made from scrap materials will help you decide on the choice of design:
How to make a wooden fence at your dacha with your own hands with photos
Wooden fences are environmentally friendly and safe for environment, the material is easy to work with and give it the required form, cutting out elements. The designs look great in combination with natural decorations in the form of flower beds or trees. But, despite all the advantages, wooden fences require more attention and care.
![](https://i2.wp.com/homius.ru/wp-content/uploads/2017/06/22-2.jpg)
Among the varieties are:
- classical;
- lattice;
- ladder;
- chess;
- vertical picket fences.
![](https://i1.wp.com/homius.ru/wp-content/uploads/2017/06/23-2.jpg)
Do-it-yourself fences can be made cheaply with the correct distribution of the material; for example, you can spend significantly less boards on the picket fence option than on the classic look.
Here are some photos decorative fences with your own hands:
Let's take a closer look at how to make fences at the dacha with your own hands from boards:
Illustration | Work stage |
![]() | Make a mark around the perimeter of the area. To do this, install the outer supports and stretch the ropes between them. The distance between the pegs should be the same. In place of the pegs, holes are dug and frame posts are installed. |
![]() | Install the pillars, securing them with a sand-cement mixture. Nail longitudinal joists or beams to frame the fence. |
![]() | Nail a picket fence or other chosen option. |
![]() | Be sure to paint the finished product or apply a protective layer against rot and fungi. Faster work will go using special equipment for applying paint through a spray bottle. |
Important! Wooden crafts Be sure to coat them with paint or varnish to increase their service life.
Watch a video about building a wooden fence on a summer cottage:
Here are a few more photos of do-it-yourself plank fences at the dacha:
Features of metal fences for dachas
Metal structures are durable and resistant to mechanical damage. They can tightly cover the area from prying eyes or have through gaps. Often they choose options for metal fences for dachas made of picket fences, which are mounted like wooden ones, but are stronger and more durable.
![](https://i0.wp.com/homius.ru/wp-content/uploads/2017/06/36-2.jpg)
There are several subgroups in total country fences made of metal:
- forged options– classified as elite fencing, as they are mainly made to order;
![](https://i2.wp.com/homius.ru/wp-content/uploads/2017/06/38-2.jpg)
- welded– can combine several different elements and are much cheaper than the first;
![](https://i1.wp.com/homius.ru/wp-content/uploads/2017/06/66-1.jpg)
- from solid sheets– completely cover the area from prying eyes;
![](https://i2.wp.com/homius.ru/wp-content/uploads/2017/06/39-2.jpg)
- sectional– a simple option, optimally suited for summer cottages, often found using chain-link mesh;
![](https://i1.wp.com/homius.ru/wp-content/uploads/2017/06/40-2.jpg)
- decorative– combine several types of metal fencing.
![](https://i1.wp.com/homius.ru/wp-content/uploads/2017/06/41-2.jpg)
When choosing a metal option, do not forget that it is susceptible to corrosion, so watch the paint and treat it with anti-corrosion solutions. When purchasing a finished product, pay attention to the absence of scratches and chips.
To make it easier to understand what the finished work from solid sheets looks like, here are some examples in the photo of fences for a dacha made of corrugated sheets:
Photos of plastic fences for summer cottages and their features
Buy a plastic fence for your dacha – optimal solution in terms of price and quality ratio. Externally, the variety of plastic structures is so great that every summer resident will be able to choose a fence for his site.
![](https://i2.wp.com/homius.ru/wp-content/uploads/2017/06/46-2.jpg)
Among the advantages of the material are:
- lightness of plastic, which is important for self-installation;
- you don’t have to spend money on paint;
- will not fade or darken over time;
- a large assortment;
- easy to clean: can be washed with any cleaning products;
- visually attractive and suitable for any site;
- the material is not affected by temperature changes;
- does not rot and rust does not form;
- long service life.
![](https://i0.wp.com/homius.ru/wp-content/uploads/2017/06/47-2.jpg)
The disadvantages include the impressive cost and the need to frequently wash the fence, as stains appear from the rain.
Fences vary in cost, appearance, size and color. There are also several subgroups:
- solid;
- fence;
- network;
- in the form of a lattice.
![](https://i0.wp.com/homius.ru/wp-content/uploads/2017/06/48-1.jpg)
Here are several different photo examples of plastic fences:
Inexpensive fences for dachas: prices, photos and reviews
The choice of purchased fencing directly depends on the price finished product. If you want to find inexpensive fence for a dacha, the price of which does not exceed 4 thousand rubles. behind linear meter, pay attention to wooden picket fence, chain-link mesh and corrugated sheets.
Here are some examples of designs with prices and dimensions, as well as consumer reviews:
Name | Photo | Short description | Cost in rub. per linear meter |
Wooden picket fence | ![]() | Height 1.5 m with a gap of 2 cm | 1050 |
Chain-link fence without frame | ![]() | Height 1.5 m | 390 |
Plastic white 1.8 classic | ![]() | Sectional: height 183 cm, width 244 cm | 3180 per piece |
Corrugated sheeting on 2 metal joists | ![]() | Height 1.5 m | 1000 |
Dmitry, Tula:“I put it at the dacha out of habit wooden fence, painted. It was inexpensive, I installed it myself.”
Maria, Bryansk:“I ordered the installation of a simple mesh fence, since the cooperative cannot block the site. Together with installation it cost 800 rubles. per linear meter."
Olga, Kaluga:“I wanted to change appearance dacha plot and protect it from prying eyes. The plastic caught my attention. I'm satisfied with the result."
Mikhail, Samara:“I ordered solid sheets of metal and checked for chips before receiving them. I installed it with a friend and they got it done quickly. The fence has been in good condition for 2 years now.”
The cost of a fence made of corrugated sheets (price per linear meter) is low, but it has great strength and durability, which is why many consumers prefer it.
If you want to save extra money, make a cheap fence for your dacha with your own hands; photos of several examples are presented below:
Article
Any owner of his own land plot, be it small cozy cottage or a suburban area for living, wants to fence off his plot with an inexpensive but attractive fence. Often, owners build fences with their own hands that look beautiful and individual, and their performance turn out to be on top.
To build a fence for your dacha with your own hands, you can use any materials, both purchased specifically for this purpose and those that are “at hand”.
The main thing is to decide for what specific purposes the fence is needed (only decorative functions, for zoning or for hiding from prying eyes and protection), what budget is allocated for construction and in what style the fence will be made.
The cost of a fence is affected by the type of material and size finished design. If metal supports, concrete mixtures, stone or tiled elements are used in construction, the facades are blank, and the structure itself is high, then the price of this structure will not be small.
If the structure is based on a foundation belt type, and the panels are translucent, then the work budget will be reduced.
Construction materials
Wood. A large number of Photos of a garden fence demonstrate that the most common material is wood. This material is environmentally friendly and safe, easy to process, and appearance tree fences fit harmoniously into environment dachas
The variety of forms of wood structures allows you to create fences of any design. For construction, elements in the form of logs, planks, beams, planks, etc. are used.
However, it is worth understanding that wooden fencing need periodic treatment with special compounds and paints that prevent the formation of fungus, mold and rot.
Mesh materials. Fences with mesh fabrics are inexpensive, but they do a good job of protecting against uninvited guests. A chain-link mesh can be used, which is attached to a metal frame by welding. More cheap option- pull the mesh over the posts.
Corrugated mesh is more durable, however, its decorative qualities could be improved. Welded mesh fabrics are practical and have an acceptable appearance.
The best fences are considered to be stone structures, which are very durable, reliable and outwardly respectable. However, the cost of such a fence is quite high, and it is impossible to do without outside help during construction.
Fences made from corrugated sheets are quite high quality. Look good in combination with stone elements, metal, wood. Color palette versatile, light weight, and durable design.
Picket fences have been used for the construction of fences not so long ago, but this material is already loved by many. The fence is translucent and installation is very simple. Thanks to large selection shades it is possible to choose an option that suits your specific gender needs.
Plastic fencing is worthy alternative option traditional materials. By service life PVC structures exceed metal and wood products. It is very easy to work with such panels.
Non-traditional fencing materials
If the priority is to build a fence, which will not cost much, then it is worth thinking about how to make a fence at the dacha from available materials. Among the most common options are the following:
Plastic bottles - fences built from this type of raw material can be considered eternal, since the service life is not affected by weather conditions, microorganisms, or natural disasters. Plastic elements can be mounted on concrete mixture or put it on a wire.
And from the lower parts of the bottle you can create a whole plastic sheet by attaching the elements together with a stapler. Between the supports, the canvases are connected according to the principle of working with a chain-link mesh.
And if you collect PVC elements from your neighbors and friends, then the cost of purchasing raw materials will be minimal, and in the end you will be able to build a cheap fence, the appearance of which will decorate the site.
Glass bottle elements are also suitable for construction homemade fence. Elements are fixed to cement mortar. You can choose any masonry technique: checkerboard, bottoms inward or outward, it is possible to lay out inscriptions or patterns from bottles, etc.
It is very profitable to use plants as fencing, because it is absolutely environmentally friendly, very beautiful, but also free. In addition, to maintain such a fence, you only need to acquire pruning shears, with which you need to level and shape the crowns of the fence.
For hedges, it is better to choose seedlings that climb well, and plants with thorns will cope with the protection function. Rosehip bushes, bindweed roses, blackberries or sea buckthorn, etc. are suitable for this.
Sculptural elements in combination with climbing branches of grapes or other plants will give the entire area a medieval touch. As supporting elements In such hedges, large ancient Greek amphorae are used, between which seedlings grow in a continuous linen.
You can purchase such amphorae in specialized stores, order production in a workshop, or cast them yourself from a concrete composition.
In addition to the external design of the future fence, you should also decide on the type of gate and its location relative to the entire fencing structure.
Photo of a fence for a summer residence
Fence on our own:
You yourself will have to look for the material and check it for quality, size and price.
Unscrupulous sellers sell metal at a high price and with reduced characteristics.
The cost of material on the construction market is 30% higher. Calculation of material per 100 m of fence is at least 105,027 rubles.
You will need to organize delivery yourself or order freight transport at an inflated price.
Approximate cost delivery by GAZelle vehicle from RUB 2,000.
You will need a drilling tool, welding equipment, cutting angle grinder, spray gun, sledgehammer, and usually an electric generator.
The approximate cost of rent for 3 days is from 20,600 rubles. + delivery of all this at least 3000 rubles. + paint and solvent another 9,000 rubles. Total: 32,600 rub.
Overhead costs will also be present, especially if you are not strong in construction calculations. This is usually 2 more deliveries for 2000 rubles each, purchase additional tool and fasteners, and that’s about another 1000 rubles.
Keep in mind that installing a fence cannot be done alone and for this you will need to use outside help. There are only 2 options for the development of events: 1) A good friend will help or 2) Hire from outside. The cost of hired workers will cost you at least 7,000 rubles.
And now we come to the most important cost! You are missing out on time that you could devote to your loved ones and people dear to you. This item cannot be assessed financially, but you can assign an amount yourself and add it to the total cost. How much would you value the lost time, 5,000, 10,000, 30,000 or even 100,000 rubles? Add to calculation.
RUB 149,629 + wasted time!
Order a fence from the company:
You only need to select the color, height and specify the length.
The company takes care of everything else. Purchasing and checking the quality and compliance of the material with the requested characteristics.
The calculation of the material for 100 m of fence, taking into account the primer of the gate and wicket, is 85,122 rubles.
The company has its own fleet of delivery vehicles, so you don’t have to worry about this problem.
Having your own transport from the company, delivery is usually free up to 80 km from the Moscow Ring Road.
The company uses its own tools and therefore the costs of purchasing and renting them will not affect you.
There are no overhead costs at all.
The company has its own established installation teams.
These are professionals with many years of experience. And on top of all this we give a 24 month warranty.
Now the most important thing. You spend full time with your family and friends. We will not take away more than one precious minute of your time.
We work - you relax! Therefore, ordering from us is cheaper than making it yourself!
In total, your actual costs will be approximately:
RUB 111,122