Fence made of plastic bottles for a summer residence. Fences made from plastic bottles Homemade fence made from plastic bottles

Many summer residents, in conditions of limited finances, have learned to create fences from unnecessary things and leftover building materials.

A striking example of the imagination of craftsmen is a fence made of plastic bottles. Construction costs are minimal, and with proper assembly technology, plastic will not be inferior in service life to corrugated sheets or polycarbonate.

Instead of fastening with self-tapping screws, you can lubricate the racks with construction glue and place bottles filled with sand or earth on top.

From fragments

To properly assemble such a fence, you will need to prepare a wire frame in advance, secure the posts from metal pipes, timber.

An alternative to wire is, but the cells should be selected according to the size of the containers.

Using fragments of plastic, you can interestingly decorate an old chain-link fence by adding bright colors to the surface.

When decorating, it is allowed to use the bottom, top, and central part of the bottle separately. The last option is the most popular.

Step by step it looks like this:

1. The top and bottom are cut off from PET.
2. The resulting fabric is leveled and cut lengthwise or crosswise, depending on the diameter of the wire frame.
3. The elements are connected to each other with a stapler.

You can cut off only the bottom of the container. In this case, the blanks are put on one on top of the other.

Out of traffic jams

Craftsmen have learned to make entire paintings and mosaics from multi-colored lids.

But to get even a simple pattern, you will need a large number of material, your time and patience.

The main function of such a fence is decorative.

A cork structure is created in two ways:

1. Weaving. 4 holes are made in each lid, through which a horizontally or vertically positioned stainless steel wire is passed. In this way, patterns are created according to a pre-prepared scheme. To avoid mistakes, you should first calculate the required amount of material and how the elements should be located in each row.
2. Gluing to wood. It is necessary to take a plywood sheet equal in width to the distance between the pillars. You can use a pen to apply the approximate location of the lids and pattern. The corks are glued to the sheet in the required order. This method is good because the mosaic can be assembled indoors and secured between the supports in its finished form.

Masters are created from plastic caps not only fences, but also original tables, stands, garden paths.

On a wire

The assembly is performed as follows:

1. In this option, picket fences are formed from bottles. The minimum number of containers per 1 picket fence is 5 pieces. The number of planks depends on the selected span width.
2. The containers are cleaned of dirt and labels are removed.
3. All containers, except the last one, which will be located on one picket fence, have the bottom cut off.
4. The elements can be attached to the wire frame horizontally. Then a hole is made in the center of the containers equal to diameter wire. An alternative is vertical fixation. In this case, holes are made in the bottle caps.
5. After this, all the cut containers are put on top of the whole bottle and passed through the wire.
6. The finished sections are welded to metal poles. TO wooden supports just screw it on with wire.

For stability, it is recommended to fill the entire bottle that will come into contact with the ground with sand and dig it a little into the ground.

Decorative (for flower beds)

For such a fence, you need to prepare a trench up to 20 cm deep around the perimeter of the flowerbed or bed. Fill the bottles with earth and place them in the trench with the neck down. Place each element close to each other.

To make the fence bright, you should take multi-colored containers and, if desired, paint them in contrasting colors.

The photo below shows an example of a fence under a garden bed, where each container is tied with rope for reinforcement.

Making such fences takes no more than 2 hours, and even one person can handle the process.

For zoning the site

To divide the garden and estate into separate zones, a border made of plastic bottles is erected. For beauty, the top of the transparent containers is cut off, colored stones and crushed stone are poured inside. The workpiece is turned over with the open side into the prepared trench. All elements are placed close to each other.

For this suitable option structures on wire up to 1.5 m high, described above.

So unusual application plastic containers allows you to create unique fences literally in a matter of hours without investment, decorative elements, and the assembly process is easy to master yourself.

Deposits of used plastic containers in the country are an eternal problem. Of course, you can burn it, but you don’t want to poison it fresh air who rarely get to breathe in acrid smoke! Therefore, let's try to find a worthy use for it. For example, let's think about how to make a fence from plastic bottles.

They have long been used to make the most various crafts- decorative and completely utilitarian, so why not use them as a building material for fencing garden plot or at least parts of it?

How to use bottles

Food grade plastic from which they are made disposable tableware and bottles, a fairly durable material that is not subject to destruction from exposure to moisture, sun, high or low temperature and other influences external environment. Therefore, it is excellent for the construction of not only fences, but also various other street buildings. For example, original gazebo, shed or greenhouse.

Most often, cylinders are used as is - entirely, with plugs. But they can be cut lengthwise, removing the bottom, into several picket pieces. Or you can take only the bottoms or corks and decorate an old wooden fence with them.

There are many options, but if you are faced with the dual task of building a fence and recycling plastic cylinders, then we will only consider those that involve “waste-free production.” Rest assured that .

Most likely, your reserves will not be enough, and you will either have to replenish them by visiting friends and acquaintances, or carry out construction in stages, as new bottles spontaneously appear on the site and in its surroundings.

Types of “bottle” fences and methods of their construction

Fences made from plastic bottles can be very different both in type and purpose.

• The simplest option is fencing flower beds, flower beds, garden paths, their visual highlighting.

• Frame fence. Light, transparent or translucent (depending on the color of the bottles), serving more as a decoration than a reliable barrier to uninvited guests.
• Capital fence- the most expensive option, which involves the use of a binder solution. But the price of cylinders filled with sand or earth is still incomparable with the cost of brick or stone, so we will consider this option.

The use of plastic bottles in the country to create various decorative elements today has reached the level of art. If we also take into account their incredibly high practicality and low cost, then we get the ideal material for building a fence. Such structures will be discussed in this article.

General provisions

Why did PET bottles receive such an unusual use for them?

Let's look at their features:

• Low price . However, they are rarely purchased on purpose at all, and are usually a waste product from the purchase of any drink. Therefore, such material can be considered completely free.

• Easily accessible. It also stems from the previous point: purchasing soda, beer and even plain water will simultaneously provide you with an empty plastic bottle. If you do not throw it away, but put it aside, then after a while you will accumulate a sufficient amount of products suitable for construction.
• Water resistance. The initial task of PET containers is to store liquids, so that they are not afraid of any precipitation.

• Easy DIY use. Low weight, elasticity and ease of cutting with a regular knife or scissors provide a lot of engineering possibilities.

• Durability. To understand how long garden products made from plastic bottles can last you, let's look at a comparative table of decomposition times various materials on open air:

Types of fences

Mini fence

This type of fencing is used to separate different areas of your site.

The installation instructions are very simple:

1. We fill the bottles with earth, sand, broken glass or other colored filler.

Tip: you can use alternating products of different shapes and combinations of different fillers.
This way you can achieve greater aesthetics and variety.

1. We bury them along the previously applied markings.

Wire fence

This design is most often used for fencing flower beds and beds with tall plants. Its installation requires a little more diligence, but is also not very complicated and consists of stringing empty bottles on the wire.

Advice: if you want to make this type of fence more stable, it is recommended to fasten the containers together in several rows.

Plastic fence

A very interesting option is to use the walls of large PET containers. From them you can build not only a fence, but also a canopy or even walls.

It looks like this:

1. Let's take it required amount bottles with a volume of two to ten liters.
2. We cut off the cones leading to the neck and bottom.
3. For convenience, we cut the resulting unique bracelets into two parts.
4. We fasten them to each other with a stapler, creating a solid plastic sheet.
5. We install it on metal posts or in window frames.

Fence rack

Such a fence can now be safely installed on the street side of the site. First of all, we bury the pillars, install the transverse strips, but then you can go in two ways:

Fence made of lids

“Beauty requires sacrifice” - this phrase is ideal for the design in question. When creating it, only bottle caps are used, which may require from ten to fifteen thousand. Then you need to think over a suitable ornament and, in accordance with it, fasten the products with wire.

Capital fence

This method is also different high level labor intensity and use additional materials. But at the end you will get a solid wall made of stone and plastic. In this case, containers filled with sand play the role of bricks and are fixed with cement mortar.

Conclusion

We looked at how to use plastic bottles in the country when arranging fences. There are several methods, and they all differ in their complexity, installation method and final result. But in any case, you will get a cheap and unique design.

Be original and economical!

The amount of garbage that each person “produces” is growing every year. The problem is becoming global as flying plastic bags and the plastic bottles lying everywhere have become an eyesore for everyone. I’m grieving, it turns out that you can help, and even for your own benefit. In any case, this applies to plastic bottles. You will be surprised how diverse and, importantly, useful crafts You can make one from plastic bottles in just a few minutes. Well, or a watch... Depends on the scale.

The buildings

PET (polyethylene terephthalate) is a thermoplastic from which bottles are made. It will be useful to know its physical properties:

• density - 1.38-1.4 g/cm³,
• softening temperature (t size) - 245 °C,
• melting temperature (t pl.) - 260 °C,
• glass transition temperature (t st.) - 70 °C,
• decomposition temperature - 350 °C.

Plastic bottles are very convenient to use, but are harmful to the environment, since the polyethylene from which they are made takes more than 200 years to decompose. This same property allows the use of almost waste raw materials as construction material. Craftsmen already even build houses from plastic bottles, as well as sheds, dachas, greenhouses, greenhouses, and fences. Worked out various technologies- the approach is quite serious.

How to build a house from plastic bottles

The basic idea is to pour bulk material into bottles, screw them on with caps and use them as bricks. Fill the bottles with sand and soil. Sand is preferable because there is too much plant debris in the soil that can rot. It must be sifted, dried, filled into bottles, compacted well, and topped up. The result is a kind of brick.

To build a house from plastic bottles, you will need a solution that fills the gaps between the “bricks”. There are options here too. This can be a regular mortar, which is used when laying brick walls, or you can make a clay mortar. To keep the “bricks” in the wall until the mortar sets, they are tied with twine on the side of the lids. Later, these “grids” will come in handy when you plaster the walls. They turn out uneven, so you can’t do without leveling.

We make a greenhouse, barn, greenhouse

You can build a greenhouse or greenhouse from plastic bottles. In this case, only transparent plastic is used, since it is necessary for sufficient light to pass through. For the construction of a shed, on the contrary, it makes sense to choose darker plastic - it will be less visible what’s inside.

The first technology - one to one

The second requirement for bottles as a building material is an even shape. This one, you know, without recesses. Otherwise, folding the walls so that they retain heat will not work - it will “siphon” into the curly cutouts. Remove labels from bottles and dry. You also need to prepare pins or rods - bottles are strung on them. Their diameter is small so that the neck passes freely. Now you can start building a greenhouse/shed from plastic bottles.

To build a greenhouse or shed, pillars are dug in the corners. Frames are assembled from timber according to the size of the walls. These frames will be the base for the bottle walls. We assemble them (the frames) on the ground and, ready-made, attach them to the dug-in pillars. When you make the frames, don't forget the doorway and windows.

We build a frame, cut off the bottom of the bottles, and string them onto a pin. From such “columns” we assemble walls, roof

The construction process begins with cutting the bottom. We string the cut bottles onto pins, pointing the necks in one direction. We insert the bottles with force so that they become very tight. Having collected a row of the required height, we attach it to the frame. You can fasten it with clamps, strips cut from metal, nails... In any way available to you. We press the second row against the first so that there is a slight deformation. We fasten it in this position. So, row by row, we assemble all the walls, then the roof.

Using the same technology you can make a gazebo. But here there is no need for tightness, so you can collect shaped and colored containers. This will make it even more interesting (example in the photo).

Second technology - sewing plastic

Bottles will also need to be smooth, transparent or yellow. The central part is cut out of them, obtaining a piece of plastic square shape. The pieces are sewn together into long strips. In the strip, the pieces are placed so that they curl in one direction. Then the strips are sewn into canvases. To make the canvas even, the strips are positioned so that they curl in different directions. As a result, they equalize each other. The finished canvases are nailed to the frame. This completes the construction of the greenhouse for plastic bottles.

This type of “cladding” for greenhouses withstands winters well; it does not need to be removed. Due to the firmware (many small holes), there is no absolute tightness, which allows you to regulate humidity. You won’t be able to heat such a greenhouse, but it will delay autumn for you and speed up the arrival of spring.

You can sew plastic for a greenhouse by hand, but it is not easy. It will be easier for those who have non-capricious Sewing machines. Old Podolsk machines cope with this task. There may be problems with others.

Fence and enclosure

You can make a fence from plastic bottles different ways. If you need a serious monolithic fence, you can use bottles as bricks. The technology is the same as when building a house. To avoid plaster (after all, there is a high risk that it will collapse) - select the color of the plastic to obtain the required russian finish. But in this case you will have to look for “building materials” of the same diameter or from different sizes lay out patterns. In general, the process is creative, no matter how you look at it.

You can also make filling for the fence from plastic bottles. Make a frame, say, from wood, and come up with a beautiful filling from shaped containers and their parts.

Furniture from scrap materials: recycling plastic bottles

Not only can you make a house and a fence from plastic bottles, they are also used as a basis for upholstered furniture. The idea is to use plastic containers rather than wood for the frame. With the lids tightly screwed on, they have a high load-bearing capacity, and when assembled into blocks, they are quite capable of withstanding loads of up to 100 kg or more.

A bed made of plastic bottles... needed good mattress, and the base is not too difficult to make

Although the furniture is made differently, the general algorithm of actions is the same:

• Select “building material” that is the same height and tighten the lids well.
• Collecting blocks the right size, fastening them with tape.
• Having assembled the base of the required shape, sew the cover. For softness, adding furniture foam.

The trick is to ensure that the bottles fit very tightly against each other and do not move. The slightest play can lead to destruction of the structure. Therefore, assemble the blocks slowly, carefully securing them. You can stack bottles in layers, securing each layer in several places. For the inner layers, it is better to use double-sided tape - the fixation will be more reliable.

Ottomans/banquettes

The easiest way is to make an ottoman or banquette from plastic bottles. We proceed in the order described above. You need to find bottles of the same height. It’s better if they are the same shape - it’s easier to assemble. From plastic containers With the lids tightly screwed on, we assemble the base in the form of a cylinder. It is advisable that the radius of the base be greater than the height of the bottles - this way the bench will not tip over.

Next, you need to cut out two circles from fiberboard, which will be slightly larger than the resulting radius of the base - this is the “bottom” and the base of the seat. We secure them with tape. We take furniture foam rubber and, according to the obtained dimensions, cut out the necessary parts. We sew a cover from furniture fabric, colors that suit the interior.

Such a banquette can be not only round. It is quite possible to make it square. And so that this furniture is not too light, it can be made heavier by pouring water. But water is not very reliable. It's better to pour sand. Both heavier and more reliable.

Sofas, chairs, armchairs

If you need furniture higher than one bottle, proceed as when creating walls for a house. Find “material” of the same shape and height. Leave the first bottle intact, screw the cap tightly (you can add sand to prevent it from turning over). The bottom of the other is cut off and one is placed on top of the other. The bottle goes a certain distance and does not move further, no matter how much effort you make. If the resulting height is enough, great; if not, put on the next one. This is how you assemble rows of the required height, then fasten them into blocks.

There is another way. It is more reliable in the sense that the bottles are not held by compressed air, but due to mechanical stop. And they have double walls, which is also important. Minus - more work, more feedstock is needed. The whole process is illustrated step by step.

1. Take the bottle and cut it approximately in the middle of the height (the upper part with the neck is smaller).
2. We insert the upper part of the neck (the lid is screwed on) until it stops into the lower part.
3. We take a whole one, the same size and shape, and insert it bottom down into the prepared structure.
4. Cut the third approximately in half and bottom part put on top (with lid).

From such modules we assemble blocks of the required configuration, fastening them with tape. Don't skimp on scotch tape. You can first fasten two bottles together, then assemble larger blocks from the double ones.

As you understand, with this technology there are a lot of bottle tops left (half of the third bottle). They can be used to make other crafts from plastic bottles: flowers, more practical things for the household.

Flower making methods

The most common crafts made from plastic bottles are garden figurines and flowers. About garden figurines read There are others interesting ideas, but there are a lot of collected interesting animals and insects. And we’ll tell you about flowers made from plastic bottles below - these are probably the crafts made from plastic bottles that bring the most pleasure. The process is simple, there are a lot of possibilities, the result is amazing.

You've probably noticed that the bottom of a PET bottle looks like a flower. All you need to do is find a bottle of a beautiful color and cut off the bottom. Now you have a nice flower. In the middle you can add petals cut from the central part, a core from plastic strips cut into noodles, or glue beads inside, but more on that in a little more detail.

Using the power of fire

To work, you will need a marker, a lighter or a candle (it’s more convenient with a candle). If available, take pliers, tweezers or pliers to hold the workpiece while processing. You will also need acrylic paints, glue and beads may be needed. The entire manufacturing process comes down to a few steps:

There are a lot of options here. Just start doing it. It may not work out perfectly right away, but you will understand what and how you can fix it. Check out some more pictures from step by step photos process of making flowers from plastic bottles.

The simplest

For beginner crafters, you can try making flowers from plastic bottles simple shapes for garden decoration. In this case, you can also use milk containers. To avoid painting plastic, look for colored ones. And it doesn’t matter so much whether they are transparent or not. They can be combined to produce flowers of different shapes.

To create such flowers, use the part near the neck. It is cut to form petals. Next - warm it up a little, giving the desired bend to the petals, a little paint, a core made of a melted piece with a thread (bottle smaller diameter, a pharmacy will do). So it turned out to be a buttercup.

Another option is to cut from the neck into strips of equal width - 1-1.5 cm, bend them (warm up a little at the base). Make a middle whisk from the side of a milk bottle or paint clear plastic with acrylic paint.

The middle is any bright. Here is a piece of cork, but you can cut it into thin noodles, roll it up and then heat it. You will get a shaggy core.

It's all about the form... Despite the imperfections, they decorate the site

The topic is actually inexhaustible. A variety of flowers are made from plastic bottles. From simple and uncomplicated to very realistic. It's not so much a matter of skill as different tastes and desires.

Useful ideas for the home

PET containers turned out to be so good material that they make a lot of useful things. In this section we have collected useful crafts made from plastic bottles that can be used around the house.

For the kitchen and more

If you cut off the bottom of a bottle with a capacity of 2–3 liters, you get a bowl or a bowl, and so that its edges are even, they can be melted on a heated iron. But so that you don’t have to clean the sole later, use a special silicone pad. If you don't have one, you can do this through a sheet of baking parchment.

Container for food. The plastic is food grade...

From the same bottle we cut off the threaded part. There should be 1-2 cm of plastic left around the thread (we melt the edges using a well-known technology). Now it won’t be difficult to seal any package hermetically: we pass it through the cut neck, wrap it outward, and screw on the lid.

The bottom of the bottles attached to the bar makes an excellent newspaper shelf (photo on the right). You can also store umbrellas.

From plastic cut into strips you can weave different shapes containers. Bottles need an even shape, with thick walls. They are cut into strips of a certain thickness. You need to cut in a spiral - the result is quite long strips. If their length is not enough, they are sewn perfectly.

Lampshades

You can even make a lampshade, but under one condition: you will use similar crafts from plastic bottles in lamps - only they hardly heat up. Plastic is incompatible with other lamps. We will describe three ways to make a lampshade from a plastic bottle.

First. Need a bottle large capacity. We draw it into strips of equal width. At the beginning and at the end of each strip, we make holes with a heated soldering iron or a nail heated on fire. We insert scissors into this hole and cut. The result is smooth stripes.

When the strips are cut, we also make a hole in the bottom, pass a thick fishing line through the neck, bring it out through the hole in the bottom, with reverse side we attach the decor. Maybe a button, maybe a pebble suitable color. Now, by pulling the fishing line, we get an interesting shaped lampshade. You can put a low power light bulb in it.

Another lampshade was made using a similar technology. But then they cut part of the bottle with the neck into strips, wrapped the strips and secured them to the neck. To give the desired shape The bend area can be slightly warmed over the flame of a candle or lighter. We attach the resulting “flowers” ​​to the base. So we get an unusual design.

They also make lampshades from the bottoms. You need to find a sufficient number of identical bottles, cut off the bottom of them, and glue them together using universal glue (choose transparent). The main thing is that it glues the plastic and hardens quickly.

Flower vases

Making a vase from a plastic bottle - what could be easier... Just cut off the neck and you're done. But there is a technique that allows you to get patterned walls. You will need a soldering iron with the thinnest tip possible. Its power should not be too high. Then everything is simple: use a heated tip to burn out the patterns.

Magically! To make the drawing appear brighter, take acrylic paint and paint the resulting beauty. The paint can be in a regular can, but it’s faster and more convenient to work with a spray can.

These are the options...

Photo ideas

Crafts from plastic bottles is such a broad topic that it is impossible to talk about everything. What’s nice is that if you know a few tricks, you can easily find out how and what to do just by looking at photographs. So here we have collected a few ideas that we found interesting.

You can even make a boat...

And this is just decoration...

Plastic bottles can be found at every step. Most of us throw them away, but the most inventive ones use them to make garden decorations in the form of palm trees, garden paths, borders for beds and flower beds.

And at some point, an ordinary plastic bottle ceased to be recyclable, but turned into a material for creativity. In addition to decorations, you can use plastic bottles to make either a small fence or a full-fledged fence for your personal plot.

Of course, this will require a large amount of material, but I think now this should not be a problem.

Zoning and decor

A small fence made of bottles is the most simple option fencing. Used for zoning garden plots, fencing flower beds, paths, etc. To make such a fence, you need to fill them with sand or earth and dig them around the area that needs to be highlighted.

Such a simple-looking fence will add zest to your site. And if you take into account some nuances, you can turn an ordinary vegetable garden into a work of art. You can think over their arrangement in advance and alternate them by color, shape, size. You can also use filler of different colors.

For example, fill one part with light sand and the other with dark sand, or use a color scheme to color the sand. You can also use fine gravel instead of sand. When combining filler, the composition will look even better.

Video: FENCE made from plastic bottles WITH YOUR HANDS

Wire fence

Plastic bottles strung on wire are used as fencing for flower beds and flower beds. By stringing them in several rows we get a tall one that is suitable for the entire area. This way we get a beautiful and unusual fence.

Fence rack

For this fence option, you need to install posts along the perimeter of the site, and attach transverse strips between them. It turns out to be a rack. Corks are glued to the planks using construction adhesive.

Then bottles filled with sand or other filler are screwed into them. You can not glue the corks, but screw them with self-tapping screws, then screw in the bottle and fix its bottom with a nail. In this case, the containers are not filled or only half filled.

We use plastic sheet

A design made not from whole bottles, but from plastic material, will look unusual. For this you will need plastic container large volume - 2 - 2.5 liters. The bottom of the bottle is cut off and top part, and the remaining cylinder is cut into two rectangular parts.

Then, the resulting rectangles are connected to each other with a stapler. It turns out to be a continuous canvas. This canvas is attached to posts installed around the perimeter of the yard.

Capital fence

To build not decorative fence, but capital, you will have to spend time and effort. Such a fence is built using cement-sand mortar or clay. Along the perimeter of the site, pillars are dug in at a distance of 1 - 1.5 m. It is not necessary to make a foundation; it is enough to thoroughly clean and level the site.

The containers are filled with solution and placed on top of each other in rows. The solution is also poured between them. It is advisable that the bottoms of the bottles face the street, you will get a decoration in the form of flowers. Additionally, they can be painted in different colors.

To prevent it from “floating” during laying, it must be laid in several stages. First, place it at a height of 0.5 - 1 m and allow the solution to set. Then the rest is reported.

Mesh made of plastic bottles

Probably the most labor-intensive, but also original version. The top and bottom of the bottle are cut off, and the remaining part is cut in a spiral.

The width of the cut threads should not exceed 3 mm. From the resulting threads a net is woven, similar to a fishing net. Then the mesh is stretched between the pillars.

It turns out quite original fencing. But this option requires time and most importantly patience.

Fence made of lids

As a material for the fence, you can use not only bottles, but also bottle caps. True, you will need a lot of caps, about 10 - 15 thousand. The work of making such a fence is also not the easiest.

You need to drill a hole in each cap and string it on a thin wire. It is advisable to think through the stringing scheme in advance to get some kind of pattern. You can experiment and make a combined one - from bottles and caps.

The advantage of this fence material is its durability and, most importantly, cost-effectiveness. After all, plastic bottles are usually thrown away, but if you put in a little effort and creativity, you will get an original and non-standard fence.

Watch the video: Unique fence made of plastic lids (“Orbit”)