Metal garage fixture. Garage Ideas: DIY Tools for the DIYer

There will always be a need for useful garage gadgets. Veda in the garage should have everything for work and comfort. You can make your own accessories for the garage, then their price will be much lower.

This topic will be our article today. You won’t be able to do everything for the garage with your own hands, but you can do the most necessary things.

Garage space arrangement

You don’t just need to buy garage accessories, but first decide what you need and how to properly place it all. After all, very often the garage is not just a place where we park the car, but also a workshop with all kinds of tools (see), accessories.

And in fact, it turns out that sometimes there are so many things accumulated in the garage that you literally have to squeeze the car between them. To prevent this from happening, we suggest putting things in order in the garage, rationally using all the space, and maybe throwing out some of the unnecessary things.

Attention: First, let's decide on the devices and equipment that everyone should definitely have in the garage. You can also make accessories for your garage with your own hands, and if that doesn’t work out, you can buy them.

Lathe	You can get by with a small one, with a few functions. You can’t make such a machine yourself, so you’ll have to contact the manufacturer. The price of a Chinese machine varies, starting from 23 thousand rubles. Concerning domestic production, then most often the equipment is assembled at a Russian plant from the same Chinese components.
Drilling machine	An irreplaceable thing - it can be used to perform drilling or milling operations with high precision. You can assemble such a unit yourself, in which case you will have to buy a stand for a drill, the price of which is around 3 thousand. A fully equipped machine costs from 20 thousand rubles.
	It will be needed when you need to shrink or press out a sleeve, sleeve, or bearing. A hydraulic jack is suitable as a base for the press.
Grinding machine	Grinding machine. This is really the thing about which they say “like having no hands.” It is used to adjust a part to size, sharpen a spatula or knives, and even perform milling operations when using a flexible sleeve for this. Therefore, you should buy a quality sharpener.
Various jokes	All kinds of shelves, racks, drawers - everything that provides rational placement of tools and accessories.

This list can be further expanded welding equipment, compressor, grinder, drill, screwdrivers.

Deciding on tool storage

The next step is to think through and organize proper storage tools (see) and zoning of the workspace.

To do this, you should pay attention to the following points:

Functional and rational use of space	Racks, shelves, hooks allow you to conveniently place tools, freeing up space. At the same time, they are easy to do with your own hands, spending a minimum of material and time.
Storing things	It's time to sort the accessories, arrange them according to the level of use. Store frequently used tools in nearby drawers, in the first rows of shelves. For heavy equipment, reserve space on the bottom shelf of the rack.
Tire space	Spare tires can be placed under the ceiling - they are not accessed very often. A device such as a bracket allows you to conveniently store replacement tires. When hung on the walls high above your head, the wheels will not interfere and take up useful space. Plastic bags or special covers allow you to keep the wheels clean and protect them from dust.
Working surface	Usually this is a table or workbench. This design is easy to assemble; just a few boards and bars are enough. A table is a place on which it is convenient to place a vice, as well as a number of other devices. It is best to equip the work surface close to the rack or shelves.
Lighting issues	Special attention should be paid to lighting; its system should be properly organized, namely a system, and not a separate (one) lighting device. It is necessary to provide lighting throughout the entire garage space: the space above the work surface, above the hood of the car, near the shelving and in other important places. So, this will require several lamps and light bulbs. Perfect option– when you can turn on all the light bulbs at the same time, or use them each separately. This can be done using an ordinary double switch. Attention: Sockets should be installed near the garage door and directly at the work desk.
Contents of clothing	It is worth highlighting a corner where the work uniform will be stored. Let it be a shelf, a hook or even a box. Don't forget about work shoes and personal protective equipment.
Security measures	A garage is a place where various chemicals and flammable solutions are present, for example, gasoline, oils, solvents. A separate cabinet or shelf is allocated for them, located near the gate. Fire safety requirements require installing a box filled with sand nearby and placing a fire extinguisher on the wall.

These are all the points that you should pay attention to when arranging your garage space. Now let’s take a closer look at homemade garage gadgets. How to make a rack, shelf and workbench with your own hands - below are step-by-step instructions. After all, it’s quite possible to do everything with your own hands.

How to make a rack

A tool lying in its place frees up space and ensures ease of use. A rack is an excellent option for placing and storing equipment.

Of course, you can buy a rack in a store, but making it yourself will save money and time (see). In addition, it will meet all your needs and ideally suit the chosen location.

So:

• Wood or metal are good materials for shelving. The design can be made straight or angular. When designing a rack, focus on a load parameter of at least 150 kg. But at the same time, do not overload each individual section; count on a weight of no more than 500 kg.
• If you choose wood, then choose durable varieties such as oak, hornbeam, and beech. Don't forget to process everything before starting installation. wooden surfaces with a special antiseptic solution. This treatment will allow the structure to last longer due to the protective layer that prevents the effects of moisture and bacteria.

It would be useful to plan and sand the wooden frame elements:

• Plywood, chipboard, and fiberboard are suitable for making shelves. The thickness of the slab must be more than 4 mm. The thickness of the slab is influenced by the expected load: a higher degree of load means stronger, thicker material.
• The shelves can be painted or covered with decorative film. This will make them look more attractive, and it will be easier to remove dirt from the treated surface.

So let's get to work. You can replace the dimensions given in the instructions with your own.

We will divide all the work on creating a rack into several sequential operations:

• We take a board 9 cm wide and cut it into pieces of different lengths. So we will have 30, 27.5, 18 cm pieces. In the future they will serve as spacers.
• Let's make blanks for the shelves. To do this, take a board, 19 cm wide, and cut it into 36 cm pieces.
• On the board serving as the base, we place marks for fastening the spacers. We will install them, maintaining a distance of 2.5 cm from each edge of the base. We begin work by gluing the upper spacer. After making sure of its reliability, we nail the top shelf onto it. We perform the same actions with the rest. Thus, we complete the work by securing the lower spacer.
• We turn the rack over to tighten the spacers and the base of the structure with screws.
• Ready rack, it wooden elements, can be processed well using sandpaper, after which we apply two layers of varnish. When the impregnation dries, you can refine appearance shelves by gluing decorative film.
• And on last stage We attach the rack to the wall using anchor screws. We will screw the fasteners under the lower and upper shelves.

Attention: The given diagram allows you to mount a rack with the required number of sections. At the same time, to strengthen the structure, wooden blocks are placed between the sections. This allows you to evenly distribute the load.

Making a shelf in the garage

It will come in handy when there is no space to install a rack, but things need to be stored somehow. Another situation is that shelving has already been installed in the garage, but there is still free space left.

Attention: The advantage of shelves is that they are easy and quick to make using minimum costs, but at the same time they are very convenient for placing all kinds of accessories.

The process of making shelves is as follows:

• We decide on the space for the shelves, their number, and take the necessary measurements.
• We prepare the material: boards and fasteners.
• We make markings on the wall for fastenings.
• Using a hammer drill, we make holes for the fasteners and screw in the dowels. For reliable fixation, it is recommended to use special dowels with hooks.
• We attach hangers with eyes to the blank shelf or board. In this case, we will fix the metal hangers with self-tapping screws, if there are none, with nails. We check the distance for the hangers with the markings on the wall.
• We attach the finished shelf to the wall in the chosen place.

Attention: Several shelves placed side by side are better than one long one. If a shelf is too long, there is a risk that it will collapse under the weight of the tools on it.

• To ensure that the shelves are level and positioned strictly horizontally, use a building level in your work, checking it several times.
• And the last point is finishing the finished shelf. This is an optional condition, but still the appearance plays a role and somewhat enlivens the gloomy atmosphere of the garage.

DIY workbench

A comfortable work surface, a workbench, will make work in the garage more comfortable and more productive. A workbench is handy for repairing car parts and performing minor repairs on household items.

A workbench that you assemble yourself has some advantages over a factory model: it is much cheaper, and besides, the size of the table will ideally suit your needs.

In order to assemble the workbench, we will prepare necessary materials and tools:

• Boards, bars;
• Fasteners;
• Wood glue, varnish, drying oil;
• Screeds;
• Planer, sandpaper.

Work plan:

• Think over the model of the workbench, pay attention to the smallest details. Usually the basis of the structure is the underframe and the tabletop. The product must include clamping device, or better yet several.
• Start assembling the tabletop. It is best to make a tabletop using 20 boards, each size 200x10x5 cm. In the fifth and sixteenth boards you need to make grooves for stops. The groove size is 2.5x2.5 cm. Make grooves every 25 cm.

Attention: The boards are glued together and fastened with metal ties. Before you start joining the boards, you need to plan their surface.

• Leave the boards until the glue dries completely. Then carefully plan them again so that their surface becomes smooth and flat. After some time, the wood shrinks, so don’t miss this moment - you will need to tighten the nuts on the ties.
• Prepare the legs for the table. Bars with dimensions of 80x10x10 cm are suitable. Brackets will be inserted into the front supports, so grooves should be made for them. Brackets are needed to connect to the longitudinal beam.
• Assemble two frames from boards, 10x5 cm. These frames will be the base of the underframe to which the supports are attached. To do this, we use a “spike” type connection. We will mount the frames themselves into the table legs and secure them with bolts. A sheet of plywood, the thickness of which is at least 1 cm, is installed on the lower frame.
• Make side and back support walls for the table. Take as material Chipboard board or plywood sheet, with a thickness of 1 cm. Attach the resulting blanks to the table. On the left side of the table, install a small cabinet with a door.
• Connect the tabletop and the upper frame using bolts. It will be more convenient to prepare holes for the bolts in advance. Screw in the bolts until the caps are buried in the wood.
• Assembling a miter box is a device that helps maintain the required angle during the sawing process. To make a miter box, you will need wooden strips, each 2 cm thick. Secure the finished miter box with stoppers.
• The last point - processing homemade workbench drying oil and then varnish. Give the table time to dry, and then feel free to get to work.
• You can also install a vice on the working surface of the table, circular saw, in general, everything you need in your work.

Anyone can make useful gadgets in the garage. Moreover, you yourself know what is necessary. We have given examples of the most common ones. So, look at the photos and videos and make your choice.

In today's story, we will introduce you to several tips and rational recommendations for arranging a garage parking space that will help cottage owners save square meters and things.

Let's look at 10 easy DIY ideas for...

You can easily and quickly install some wire containers on the wall to store various things. The rational arrangement of balls and hoses is another simple way to organize all the items and products that easily create chaos and dust if they are not sorted into compartments and containers.

2. Signs and inscriptions

This could be stickers or completely painting doors and cabinets. unusual furniture coating for special markings. They will help family members navigate the garage space, and also store items and products in a certain place. The main advantage of this decoration method is the speed of implementation, which will only take a few hours!

3. The magic of magnets

For small tools and drill bits, you can use magnetic strips on the available wall space. You can hang small parts and devices on them that will always be at hand. This is a simple way to practically organize a room and storage systems, and is also extremely easy to implement.

4. Original hooks

Take long unused keys and turn them into hooks for wall decor and as an original authentic accessory. On them you can hang work clothes, ropes and everything that should be within easy reach.

5. Cans and other containers

You can organize and separate your nuts and bolts by adding some plastic containers for the toolbar. This will make it much easier for you to find the part or element you need. All products will be sorted and placed in certain containers, and for additional convenience they can be attached to a wooden shelf.

6. Patch panel or board

Of course, you can always put in a perforated board where you can easily add some new hooks and organize your home decor in a new way. Plus, this organizational idea can act as a “makeover” for a garage wall! Tips and recommendations for using this multifunctional device can be found on the Internet portal Small Interiors.

7. Practical buckets

Some shelves and a large set of segments (stickers) can really come in handy. This is another one quick way forming a functional and rational area for placing things that will add characteristic style V Interior Design and help keep your work tools in order.

8. Bungee balls

Using bungee cords to store equipment for a variety of sports is a great concept for transforming a space. You can place both soccer and basketball balls in these stylized nets! They are commercially available and extremely easy to install.

With this creative idea By creating a rational layout, you will no longer have any excuses for why children do not wear helmets during classes and after school on bike rides and attractions. After all, now you need to manage not to find them in a specially equipped place! Add wall decoration small hooks on which these safety devices will be located.

Instead of throwing water bottles and carton boxes in the corner of your garage, build a quick and easy trash station for the whole family. It can be built using plastic boxes and boxes with inscriptions, which allow you to sort waste into plastic and iron.

We have presented to your attention an interesting and extraordinary selection of conceptual ideas and creative solutions for organizing a garage space in an unusual house.

Did you like these rational and practical ideas? Share with us your opinion on this issue in the comments below...

Categories:
Places:

Many men are delusional about building a comfortable garage, but when the structure is finally ready, they think about how to make it functional, practical, and spacious at the same time.

After all, a motorhome should be used not only for the purpose of storing a car, but also for placing gardening tools, tools, additional sets of tires, which will allow you not to clutter up your residential building with these items. Homemade products for the garage will allow you to endow such a small space with the described qualities: original solutions with a minimum of material costs further.

Arranging a motorhome is not just a one-time selection in the garage with your own hands, pieces of furniture, various storage systems, all sorts of tools, home handyman, but a system of measures aimed at rational planning of space, giving it high functionality and the maximum level of comfort.

It is important not only to select garage interior items, but also to arrange them correctly so that the space can be used comfortably and the space itself is filled with coziness.

A cool environment inside a garage building is not at all an unattainable dream, but a reality for many experienced car owners. How to do this if big money No?

Can be thought out, designed and manufactured unique devices for a garage, which will allow you to rationally solve the issue of storing many items of different sizes, shapes, and purposes inside the building.

Alarm from a mobile phone.

Do-it-yourself homemade garage home products allow you to solve many issues related to storing specific items inside the motorhome:

• how to arrange tires and wheels so as not to maintain the possibility of free movement around the area;
• how to organize workplace for the purpose of car repairs, performing plumbing work;
• where to store country tools, important for the economy;
• is it possible to make carriers without owning a drawing, or is it impossible to do without a homemade garage diagram when working;
• how to construct a compressor with your own hands: homemade for advanced craftsmen.

We will try to describe the topics raised in as much detail as possible below.

Tire and wheel storage

Not a single car owner will be spared the problem of storing out-of-season “shoes” vehicle. Where to put tires so that they do not clutter up the garage building? If you use the ideas of experienced car owners, solving this problem will not be difficult.

The choice of storage method for puller tires is influenced by the nature of their installation. Products with discs should be hung from luggage straps, chains, metal cables with a diameter of 4 mm or store lying down in stacks. Belt fastenings must be of high quality and reliable. They are installed under the ceiling on a wall surface and fixed to a beam located on top.

How to store tires in a garage?

You can also drive pins or hooks into the wall surface, the bend of which is not very large. The products are mounted in increments slightly larger than the diameter of the tire. Select the length of the pins so that such devices for the garage stick out above the tire by 1-2 cm, no more. They should be stuffed not just under the ceiling surface, but a little lower, so that the wheels fit in without difficulty.

Tires without rims cannot be stored in stacks: only while standing. It is better to organize separate shelves by welding a structure from a profiled pipe 20x20 or 30x30 mm. In addition, you can use a corner. From use round pipe It is worth refusing, since it is difficult to weld with an inverter welding machine.

Make cross members out of it so that the tires fit and hold up better.

Make the shelves in the following sizes.

Place the shelf on the wall where light will not fall on the rubber, otherwise it will deteriorate.

Important! When setting up a motorhome, it is important to adhere to safety rules. If a person is inside a building, the doors should open instantly, without obstacles! No tool storage facilities should overly clutter the garage, leaving no room for a person to pass through.

Workplace

Most are homemade garage fixtures car owners are manufactured with the aim of equipping a comfortable workplace, as well as creating a well-thought-out tool storage system.

Various types of shelves and smart shelving are the most popular ways to solve this problem, but there are others. We will describe the sequence of actions, following which any car owner will be able to create a comfortable work area inside the motorhome.

Bearing removal device.

On initial stage Let's determine where to place the workbench with tools.

There are several options:

1. Use the entire width of the far wall for it.
   This solution is relevant when the motorhome is quite spacious, characterized by sufficient length, with the ability to “steal” about 1.5 m of the main area. The positive side this decision is the possibility of compact arrangement of products. Nothing will interfere with the passage along the vehicle in the garage building. The weak point of this idea is the fact that a person will have to travel a considerable distance to the workbench to pick up the tool when working outdoors.
2. Use one of the long walls.
   This idea suits a wide, short garage. Place the table or workbench to the left of the entrance and on the side of the driver's door. It will be much easier to remove current equipment from the garage, but you will need to move along the car carefully.
3. Corner position of the table.
   It is a good option, as it allows you to rationally plan the space of a free corner. Experts advise: increase functionality working area It is possible if you make one side of the table longer than the other. There will be plenty of space left for the car in the garage.

Next you need to understand what kind of table is worth constructing. You can use the option of boards covered with plywood. Such devices for the garage will cost little money, but at the same time they will be quite comfortable.

If the car owner knows how to weld, you can make your own frame from a corner, and then cover it with moisture-resistant plywood. More can be applied expensive materials, if the budget allows it.

Where to store small tools? Install shelves under the table surface, make drawers. The second option is more convenient, but it is much more difficult to make shelves. You can choose ready-made baskets made of plastic with thick walls.

On a note! You can use original idea and construct racks for tools from used canisters with a handle on top. Cut out one of the sides and use the canister as a box.

Tool storage

It is very important to organize the storage of tools for a garage, cottage, or car service. in such a way that everything is in the chosen order, is always at hand, and is quickly available for work.

You can prepare homemade closed boxes, but with such a storage system it is difficult to remember where a specific item is. If you do not return the tool to its place, after a while it will be extremely difficult to find it: you will need to open the structure and rummage through the contents of all the drawers.

There are several ideas for storing small items and tools rationally:

Metal mesh made of 2 mm wire with a 10 cm cage

It is attached to the wall surface by biting it off and bending some twigs. By creating unique hooks and adding crossbars to the cage, you can use it for storing small items. Stores sell special hooks that can be attached to the mesh if you don’t want to make them yourself.

Making a special shelf for screwdrivers

Take a board or plywood with a thickness of 15 mm. Sand the material thoroughly so that there is no residue left when you touch it. Next, drill one or more rows of holes different diameters. If the width of the board allows, make some holes large. They will fit chisels and hammer handles.

On a note! Be sure to clean the resulting chips with sandpaper. Such a shelf is hung on the wall using a regular bracket.

Pliers, pliers and wire cutters

Creating a board for pliers, pliers, wire cutters. Such inventory is extremely difficult to store in a convenient way. Sometimes they are hung on a net, but this is inconvenient. It is better to attach a narrow board to the wall on which you place the tool. To achieve comfortable use, one side of the board needs to be ground down. Then in the cut it will look like an isosceles triangle, and the tool will fit more securely.

Rechargeable batteries

To store battery-powered tools, chargers and spare batteries, you should make a box with a cross shelf. Make cuts of different formats in the bottom of the box and insert power tools into it, and use the cross shelf and the box lid as regular shelves.

Homemade carriers for the garage

Even a well-lit motorhome has one drawback: under the bottom of the car it is dark, almost like night. To create illumination for this area, it is worth using portable carriers for the garage. These are the simplest, but very useful devices for the garage, which are easy to make with your own hands.

The design of the product is simple: a cartridge with a small screen and a hook are attached to the wire. An ordinary incandescent light bulb or housekeeper is inserted into it. To avoid accidentally breaking the light bulb, it is important to find a convenient place to hang the carrier.

It is also important to choose the location of the light bulb so that the light it emits is directed in the right direction. In other words, the system can be improved, and we will explain how later.

Unbreakable lamp socket

It is important to provide for every little detail in the garage: everything needed to repair a car must be safe. Therefore, it is worth modifying a regular cartridge, giving it unbreakable qualities. Make from plastic bottle a kind of lampshade that will reliably protect the fragile bulb of an energy-saving light bulb.

You can also apply an LED lamp to such a lampshade, and the incandescent lamp will heat up and melt the plastic.

To create a plastic lampshade, you will need to do the following:

• find a translucent bottle with medium-thick walls;
• arrange a window in it 1/4 of the diameter of the bottle itself;
• cut the neck so that a lamp can be mounted inside the product, but in such a way that the screwed-in bulb presses it against the socket;
• assemble the design, try it.

Carrying LED Recessed Light

We continue the section “tips from a garage homemade product.” Another way to modify an ordinary carrier for working in a garage pit is to replace the incandescent lamp with a flat LED recessed lamp operating from a 220 V network. We’ll tell you how to do this from a regular product below.

Drawing of an LED lamp.

You will also need a cord with a plug, a piece plastic window sill, slightly larger in size than the lamp itself, for mounting a lighting device.

The car owner chooses the dimensions at his own discretion, and the sequence of work is as follows:

• on one side, cut a hole in the window sill, the diameter of which is smaller than the diameter of the lamp body;
• remove the standard mount of the device;
• pass the wiring through the cells of the window sill, bring it out into the organized hole;
• connect the lamp;
• glue it to the base;
• cut strips of plastic from the window sill and seal the sides with them;
• Bend a bracket from a piece of tin, screwing it to the lamp with self-tapping screws.

Bottom line

The main idea when arranging a building for a car is country house What you should adhere to in your work is rational space planning. Place items so that they are all at hand and stored in order.

Interesting and useful homemade products to the garage. Then the dacha or garage will always look neat, and it will be cozy to be inside the building.

By on home garden Many car owners use their garage as a workshop, gradually filling it with practical devices that make car repair and maintenance easier. Many of them can be made independently using the recommendations presented in this article.

Many garage workshop tools can be...

Homemade garage tools: for storing tools in the garage. Homemade gadgets for the home workshop

By on house garden

Many car owners use their garage as a workshop, gradually filling it with practical devices that make car repair and maintenance easier. Many of them can be made independently using the recommendations presented in this article.

Video of homemade machines and devices for the home workshop

Many accessories for a garage workshop can be made independently; the video below demonstrates some of them.

Garage homemade products are devices that make garage life much easier; in addition, they work no worse than factory machines. By equipping your workshop with such devices, you can independently produce the necessary parts for your car, as well as various crafts for your home or garden.

Video of homemade tools and accessories for the garage

It is difficult to predict in advance what devices may be needed when repairing a car, however, there are some homemade products, some of which are used most often. Some of them can be seen in the video below.

Drawings of homemade devices

Pipe bender for profile pipe

Pipe bender - useful in household a device that allows you to bend a metal or polymer pipe to a certain degree. Bent pipes are often used in the construction of greenhouses and greenhouses, installation of heating and other needs. Using the presented drawing, you can make a manual pipe bender yourself.

Small homemade vise

A vice is a practical device used when performing plumbing work. With its help, it is possible to reliably fix a part requiring metalworking in a certain position.

Consists of this device from several parts:

• base plate;
• 2nd lips – movable and non-movable;
• lever;
• chassis screw.

Using a small-sized bench vice, the drawing of which is presented above, it is convenient to sharpen and otherwise process small parts.

Wood CNC Router

Having a CNC milling machine in your home workshop allows you to perform a whole range of wood machining work.

Homemade milling machine consists of several units and parts:

• bed;
• calipers designed to move cutters;
• caliper guides;
• spindle with installed cutter;
• microcontroller or switching board with microcircuits that provide automation of the machine;
• electric motor with power supply;
• drivers responsible for transmitting commands from the controller to the electric motor;
• a vacuum cleaner for collecting sawdust generated as a result of the operation of the machine.

A DIY CNC milling machine allows you to perform engraving and milling work.

Homemade tools for car repairs

A windshield wiper arm remover is a special tool that facilitates the process of removing wiper arms. You can make it yourself from a piece of reinforcement, a six-channel channel and a ten-bolt. To do this, use a drilling machine to make 14 holes and weld 2 nuts on both sides of the hole and a handle from the fittings, screw the bolt into the workpiece and, putting on heat shrink, screw in the threaded rivet. The tool is ready.

Another version of the device for shooting windshield wiper arms is shown in the photo below.

Another useful homemade device with which you can manually re-align your wheels yourself. Another version of this device can be seen in the photo below.

When carrying out major car repairs, you usually cannot do without a lift. A factory-made device is not cheap, and is not needed very often, so it can easily be replaced with a device made at home.

Homemade machines and devices for the garage

By making devices for tire fitting and balancing, you can carry out this work yourself, significantly saving money on car maintenance. In addition, such devices will come to the rescue if it is not possible to come to a specialized tire shop.

In your garage workshop you can equip universal machine for tire fitting using scrap materials - metal pipes and the hub.

When performing various crafts for the home, it often becomes necessary to drill a straight hole. This is difficult to accomplish a regular drill, but if you make a stand for a drill, like the one shown in the photo, then it will be much easier to drill without distortions. This design can be made from various materials. For example:

• made of metal;

• made of wood.

Using the diagram presented below, you can make your own drilling machine from a drill.

Usage homemade press will allow the garage workshop to produce products using the pressing method. Such a device can be made from hydraulic jack, fixed at the top of the frame, in turn welded from scrap materials. The pressure in this case is directed downward.

Another version of a homemade press, the design of which involves attaching a jack at the base of the bed. In this case, the pressure process is carried out upward.

Using a homemade press, you can straighten, bend sheets of metal, compress cardboard, and fasten individual elements. The video below demonstrates how to make such a necessary device yourself.

Tool storage devices in the garage

Having order is the key to comfortable use of workplaces in the garage. To ensure this order in the workplace, special organizers are designed to make it convenient to store and easy to find. necessary tools. You can make such devices yourself, using available tools.

An easy and affordable way to store hand tool, is a wall organizer made from tin cans attached to a sheet of plywood. Additionally, you can nail several hooks or nails to it to conveniently hang the measuring and electric tool. In the absence of tin cans, PVC pipes can be used as holders various diameters, cut into pieces and screwed to a sheet of plywood or chipboard.

It's even easier to do special device for storing screwdrivers. To do this you need to take wooden block and drill holes in it the right size. Mount the finished holder on the wall. On the same holder you can organize a storage system for chisels and chisels. It is enough to cut out special holes in a wooden blank. In the same way, you can make a holder for power tools by cutting out the corresponding holes in a wooden shelf.

An interesting way to store tools is shown in the photo above. Its principle is based on the use of magnetic tapes attached to metal strips. Using such a system, it is convenient to store drills, keys and other metal tools.

Convenient and practical organizers for storing screws, bolts, nails and other small items can be made with your own hands from transparent plastic cans with lids. To prevent them from taking up space, you should attach them by the cover from below to the shelf. This and other ways to store tools allow you to efficiently use space in the garage and have everything you need at hand.

The video below demonstrates how to set up a simple and convenient tool storage system in your workshop or garage.

Homemade woodworking tools for the home workshop

Homemade milling machine

Homemade milling machines can perform one or more operations. Preference, of course, is given to multifunctional devices that save space in the garage workshop. With their help you can:

Make indentations of a certain shape;

Drill holes

Make grooves;

Process workpieces.

The simplest milling machine can be made on the basis of a drill. To do this, it is fixed to a steel profile or to a plywood body, and a rotating clamp is placed opposite it. Parts are processed using special cutters held by hand.

Homemade lathe

Creating a lathe with your own hands allows you to make dishes, interior decor and furniture from wooden blanks. Such a device will become an affordable alternative to industrial production and will help realize your creative potential. A homemade lathe can be made from individual components and parts:

• an electric motor used as an electric drive for the machine;
• a headstock, which can serve as an electric sharpener;
• tailstock made from a drill;
• stop for cutters;
• transverse guides;
• a frame made of metal profiles or beams.

Front and tailstock lathe are the main working elements, between which the wooden blank. The rotating movement from the electric motor is transmitted to the workpiece through the front headstock, while the rear headstock remains static, responsible for holding the workpiece. If you equip a homemade lathe with additional devices - a baluster, a trident, a copier and others, then its functionality will increase significantly.

The video below demonstrates how to make a lathe with your own hands.

Homemade drilling machine

If necessary, drill precise holes in metal, plastic or wooden parts, experienced craftsmen It is recommended to use a drilling machine. Unlike a drill, which vibrates strongly during operation, this device provides high-quality results, regardless of the material and thickness of the workpiece. You can make a simple drilling machine yourself by using the same home drill, but installing it in a vertical position on a frame made of furniture board and attaching it to metal stand. If necessary, such a machine can be equipped with an asynchronous motor.

As a rule, home craftsmen do not stop at making the machines themselves. Very often they work to improve existing equipment.

The video below demonstrates useful accessories for a lathe that expand its functionality.

Homemade metal tools for the home workshop

These do-it-yourself devices for the home workshop are designed to facilitate the metalworking process. They are usually made from scrap materials and tools.

Among the most popular devices are:

• pipe benders;
• press;
• vice;
• milling, metalworking, turning, drilling and thicknessing machines;
• devices for drill sharpening, knives and other tools.

With their help, a home craftsman can make practical devices for a summer house, garage, and also equip comfortable home. Examples of useful machines and devices in the household can be seen in the photo below.

Homemade circular saw

Homemade thickness planer

Homemade cutting machine for metal

The video demonstrates how to make some useful household devices.

Taking into account the presented recommendations and drawings, any home craftsman will be able to make useful devices for the garage and machines for his workshop, arrange an ergonomic space in it, and realize his creative abilities.

DIY garage accessories: all the most useful things

Tags: Garage, DIY

We will send the material to you by e-mail

D la rational use space, communications and do-it-yourself garage accessories from scrap materials are used. It is necessary to use walls and an underground level in the process, place machines inside the room, and organize normal lighting.

Homemade gadgets for the garage

For comfortable operation of a room intended for car storage, you should adhere to certain recommendations:

• the tool must be as accessible as possible;
• storage spaces equipped with shelves/racks are much more convenient;
• workbenches, inspection pits, homemade machines and do-it-yourself garage accessories expand the capabilities of the car owner;
• the cellar allows you to save space;
• The productivity of work and minor repairs depends on the quality of lighting.

Depending on the dimensions of the building, the area occupied by equipment, fixtures, and communications should not be more than 10–20% of the size of the garage floor.

Storage areas, racks, workbenches

In 80% of cases, do-it-yourself garage fixtures are built to store accessories, tools, and vehicle equipment. It should be taken into account that the most bulky parts of the car are sets of winter/summer tires, depending on the season.

It is more convenient to store wheels on brackets of the following design:

• two triangular frames from a corner, connected by jumpers from any rolled metal;
• the triangles are attached to the wall, the wheels are installed perpendicular to the supporting structure, falling slightly between the jumpers.

This is the most economical option for storing tires in the off-season. The most popular among car enthusiasts are straight and corner workbenches. The lower space is usually filled with shelves or drawers; sharpening machines, vice.

It’s easier to build a wooden workbench yourself, but it has a shorter lifespan than its rolled metal counterpart, which needs to be welded. If in load-bearing walls During construction, corners for shelves were not included; it is easier to make racks from rolled metal or lumber.

Original hanging shelves are suitable for storing long items

The design and arrangement of shelving inside each garage is too individual to follow general recommendations.

Inspection pit and cellar

A necessary accessory for a DIY garage is an inspection hole. Moreover, the owner does not have to carry out all the repairs himself. Underground communications can be used in the following cases:

• inspection of chassis, steering, brake system before a long trip;
• oil change, which allows you to save money and does not take much time;
• minor repairs that can be carried out by the owner's qualifications.

It is more convenient to make the entrance to the cellar from a hole, as this will allow you to concrete several steps instead of using an extension ladder.

The main nuances of these designs are:

• swelling of clay soils is harmful to underground structures;
• therefore, all elements of the pit and cellar are insulated from the outside with expanded polystyrene;
• sand or crushed stone is used in the underlying layer before concreting and backfilling of the pit sinuses;
• Drains are laid along the perimeter of underground structures at the base level to collect and drain water.

The width of the pit should allow the driver to enter it without lighting.

Lighting and ventilation

More often used in garages parallel circuits lighting fixtures. One lamp allows you to use a specific area, several devices are turned on during a major renovation or a visit to the cellar. Minimum consumption electricity is provided LED lamps. Daylighting devices have a greater resource.

Cars use toxic, harmful fuels and lubricants, so do-it-yourself garage ventilation devices that allow you to create air exchange are becoming relevant. The influx is organized from below:

• garage - vents in the masonry, protected by bars;
• cellar - pipe from the garage or from the street.

The hood is mounted under the ceiling of the cellar, the roof of the garage, or has the form of vents in the main walls at the highest points.

Ventilation in the garage with your own hands. From this publication you will learn why garage ventilation is so important, what air exchange schemes exist, and installation nuances.

Other useful ideas

Useful accessories for the garage with your own hands can be made from used dishes, equipment, and materials left over from construction. For example, by gluing the lids of plastic cans horizontally/vertically, the owner receives convenient transparent containers for equipment or hardware, which are always at hand.

Who said that crafts are not interesting to men, it’s just that if women read about how we do it with great pleasure, then for car enthusiasts there is no more interesting topic than do-it-yourself crafts for the garage. In fact, there are a lot of devices with which you can improve your garage life, so there will be something to do throughout the long winter.

Useful homemade products for the garage with your own hands

There are original interesting products that you can do yourself, and there are useful homemade products for the garage with your own hands. First of all, such things include furniture: cabinets, tables, hangers. All this allows you to optimize the surrounding space as much as possible, especially if your footage is not too large.

Most often, during the initial arrangement, all the necessary furniture is ordered. But if you rent a room or don’t want to take money out of the family budget for this, then you can easily arrange it on your own, especially if you know how to hold basic tools in your hands. To help yourself and for inspiration, you can use the video from homemade products for the garage with your own hands (YouTube can please you with a variety of ideas), and you can also take into account tips on arrangement, which will be the basis for a successful layout.

If you look at the photo that shows the optimal set of useful furniture elements, you will notice useful nuances for yourself. First, the location of any storage system must be located at a certain distance from the walls. It is believed that there should be at least half a meter between the machine standing indoors and the rack for normal, comfortable work inside. If the shape of your car storage is more like a rectangle rather than a square (this happens quite often), then it is worth moving all the storage for tools and useful things to one area along the far wall opposite the door. This is where you can place not only a table or shelving unit, but even a carpentry or lathe with maximum convenience. It would be worth mentioning that all storage of your tools should be located inside the garage only if it is securely closed or protected by tightly closed ones. Otherwise, it is better to place there only the most necessary things, preferably those that are not of particular value to robbers.

If you provide in a separate room, which is located on the territory of your suburban area, then it’s better to make them the so-called attic type, that is, located in the roof, and choose a place just above such a working area. In the summer and spring, this arrangement of windows will help you save on lighting; there will be enough sunlight for all types of work, and you will also be able to ventilate the room, because ventilation cannot always cope properly, especially if you are going to work inside, like in a workshop.

If you have a total shortage of money or out of love for art, you can make an original storage system using old empty cans. Any motorist accumulates quite a lot of them over the course of a year, and if you ask your fellow neighbors, there will be enough for each compartment of such an interesting cabinet. Of course, there is nothing complicated here and to perform such homemade garage DIY video-lessons are not needed at all. You need to take a plastic canister and wash it well so that no traces of its contents remain. Armed with metal scissors, a knife or other tool, we cut off the front cover of the canister, but so that the sides remain and the contents do not fall over the edge. To make the structure more stable, you can fix it on the back wall using self-tapping screws, but we will, of course, drive them not into the wall, but into a wooden strip, which we attach with dowels.

Do-it-yourself garage crafts photo

Continuing to explore options do-it-yourself garage crafts, photo which you have already seen and will see below, we must look at other ways of rational storage. If horizontal pull-out shelves just don’t fit inside, then you can make very original and functional vertical shelves. You will be surprised how many things they can accommodate, while the tools will be easily accessible and, as they say, “at hand.”

The same option as shown in the photo can be used in, where you also often need to set up a workshop, and even less space is allocated for it than is left in the garage. For such a design, you will need to build a frame from wooden boards, and make notches along its upper and lower edges where the cells will be inserted. Most likely, the inspiration for this design was the classic hives that are used for breeding bees; the system here is exactly the same. The sheets that are inserted inside have a perforated surface and the presence of these small holes will allow you to screw nails inside, hang hooks to hang tools and useful devices as conveniently as possible so that they do not fly off when pulling out and retracting.

Exactly the same perforation can be included in a furniture set. Having such a complete set of everything necessary for a home craftsman, you can build many useful homemade products for the garage with your own hands, video with whom we are online. In popularity, such resources may soon overtake popular hand-made projects, because men, no less than women, want to make the space around them, their kingdom, beautiful, functional, and comfortable.

Interesting DIY crafts for the garage

Let’s digress a little from the useful and talk about things that are not mandatory, but no less useful than traditional furniture, machines, lighting or heating. Let's remember that for many men, the garage is a real men's club, where you can equip everything to your liking. We offer you a couple of options interesting homemade products do it yourself for the garage, which support the automotive theme and can be used for long gatherings.

We are used to either simply throwing away tires that are completely worn out, or repairing them. Having spent the last winter set on a swan or a flowerpot, this year you can easily allocate it to your loved one by making a whole furniture set. Frankly speaking, you will need not only car tires for this purpose, but also bicycle tires, because their backs can be designed, turning the stool into a chair.

Practice making such furniture and soon you will be able to replace your coffee table with one that not only looks beautiful, but can also become part of the original design concept.

A table and chairs are great; there will be somewhere to sit, but with the question of what to cook a delicious kebab on, our next idea will help. The fact is that an ordinary folding barbecue may not maintain the required temperature of the coals for a long time, and if you like to sit near the fire for a long time, you should make something larger. We will modernize it a little and present to your attention a grill made on the basis of a wheel rim. In order for the rim to maintain the set temperature well and not allow the coals to cool, it needs to be lined with bricks, but for maximum decorativeness of such a homemade product, it is better to file them a little using a grinder to fold them in a circle. The bottom must be filled with any available material, which does not support combustion, for example, fine crushed stone.

Homemade products for the garage with your own hands drawings

Again, returning from entertainment to business, you need to understand that for many, a garage can be an alternative to a workshop in which you can serve not only your needs by creating crafts for your apartment, cottage, or even car repair, but also fulfilling small orders. In order to make high-quality useful homemade garage do-it-yourself drawings, diagrams and technical recommendations you will definitely need them.

If you plan to spend quite a lot of time in your makeshift workshop, then among those you are interested in DIY DIY for the garage - heating, lighting, ventilation, that is, the arrangement of a fully comfortable stay inside for a long time. Some people prefer to install infrared heaters, but from the point of view of the cost of electricity this will not be a very rational option. A good option can be water heating, but it is best designed in garages that are located next to a residential building.

Solid fuel boilers You can place any design inside any type of garage, even make your own potbelly stove out of metal using welding machine. But do not forget that with this type of heating, the interior decoration should be made of non-combustible materials, and the ventilation should be done efficiently, even at the stage when we need to promptly remove all combustion products from the room.

DIY homemade machines for the garage

Even if you are a non-professional carpenter or turner, you will still need the most convenient and compact machines. DIY homemade products for the garage can just become workbenches - tabletops on which various electric tools are attached, for example, a jigsaw, milling machine, lathe. A metal work surface will last you much longer than a wooden one, so you can easily combine wood and metal.