DIY table lampshade. How to make a fabric lampshade with your own hands
Renew a lampshade for a floor lamp with your own hands, make a new one or repair an old one good idea to give a fresh shine and a new mood to your home.
How can you make a lampshade for a floor lamp with your own hands if the old one has worn out or no longer corresponds to the new time or new tastes of the owners.
Everyone loves floor lamps. This is the most multifunctional light source. It is so cozy to sit under it with knitting or a book, it can be moved, it is mobile and is an interior decoration. That is why the decor of the floor lamp so attracts the eyes of needlewomen.
Many people inherit lamps from previous generations, and perhaps at first they push them somewhere, but then the aura of old household items becomes attractive. There is a desire to repair an old floor lamp, update a lampshade, and all this at home.
This is a good idea, now there are so many ideas around and possibilities for their implementation that it’s simply awkward to sit with your hands folded. Reupholster the lampshade on old frame or remodel the floor lamp completely, it’s up to you, the process will be exciting in any case.
Frame for lampshade
From wire disposable hangers
Using pliers, unwind and straighten the wire from disposable dry cleaner hangers.
Using a ruler and wire cutters, cut two pieces of straightened wire to the desired length. The length is equal to the length of the perimeter of the floor lamp shade
Use pliers to make a circle out of each wire with a hook and loop on the ends to secure the circle
Measure and cut two pieces of straight wire equal to the height of the lampshade + hem allowance for loops
Bend loops at both ends of these wires, use a round stick and pliers
Place the loop at one end over the circle and pull it off, and the loop at the other end over the other circle. Do the same with your own hands with the second wire. To secure the frame structure.
Glue the hinges. Metal adhesive « Cold welding", "Epoxylin", "Superglue".
Cut 4 pieces of wire equal to the radius of the circle minus the radius of the small circle for the light bulb, plus the hem allowance for the hook. You can calculate the radius for a known circumference using a formula known from school, or you can use online calculator on the website allcalc.ru/node/783
Make a small circle for the light bulb with your hands from a piece of wire with a length slightly larger than the circumference of the light bulb socket plus an allowance for the hook. Connect the wire into a ring and glue the ends
Attach all 4 knitting needles to the large circle and to the small one.
Wire mesh
For a floor lamp you will need 2m of mesh 40cm wide
How to sew a lampshade from fabric video
What can be made from
Do better with what you know how to do. If you knit well, show off your talent as a knitter; if you embroider, feel free to embroider a plot that attracts you. The main thing is to do it yourself. Your guests will gasp with delight and admiration.
Fabric lampshade
Very convenient option, if you need to update or repair it yourself at home. And it happens that the furniture has been updated and you need to change the colors of the accessories. Or the most beautiful embroidery has finally been completed and it turned out to be appropriate for a floor lamp. Re-upholstery saves in many cases, see detailed master class on the site.
You can make a lampshade for a floor lamp or table lamp in minutes, or you can create a masterpiece from the world of lampshades with your own hands in weeks.
Master class fabric lampshade. Master class lampshade made of fabric with a paper pattern
Lampshade made using macrame technique
A lampshade made using the macrame technique can be found even on the street, as an attractive advertisement for a store or a cozy cafe.
Lampshade made of threads
It is surprising that threads have been used for these purposes for several decades. The threads create a particularly cozy look, whether they are tightly packed together or scattered in sparse, light, elegant weaves.
- Select threads for harmonious combination with the interior of the room
- Use thick, thin threads; they hold their shape and color better. The loose ones pick up glue and become faded.
- Before winding the threads, evenly coat the ball with Vaseline.
- Use transparent glue that glazes when it dries.
For the black lampshade, we took a skein of black satin thread and 2m of strong black braid.
Crochet lampshade
Crochet lampshades look incredibly cute and cozy at the same time and can be exquisitely stylish at the same time. Create an exclusive item with your own hands. Even for beginner knitters, crocheting in the round is not difficult. And for experienced needlewomen there is a whole expanse of more complex ideas.
A lovely lampshade for a flat kitchen lamp is crocheted according to the pattern. The diagram is attached below.
Wooden lampshade
Wooden lampshades are made from slats or from a single piece of wood. The mind-blowing video blew my mind.
Video on how to make a floor lamp from a log with your own hands
A selection of photos for inspiration and pleasure
The article used ideas:
lazuli-handmade.nl, http://marrietta.ru, arxip.com
Always with you, It's Beautiful Here.
In the interior of each apartment, even the smallest and most insignificant element plays an important role. Just one wrong detail and the interior is ruined. That is why the choice must be approached carefully and very responsibly. In this article we will talk about such interior decoration as lamps. It’s not enough to just hang a light bulb, you also need to decorate it somehow. This can be done using a lampshade. Store-bought variations of lampshades may not always please you, and it is rare that among them you can choose the model that will harmoniously fit into our interior. We do not always choose a new lamp with beautiful design, sometimes the old one no longer attracts us, has gone out of fashion or absolutely does not fit into new interior. All these factors push us to create DIY lampshade (photo).
It would seem that decorating a lampshade yourself is a rather complicated procedure, but in fact everything is very simple. Set aside some free time, and we will tell you several options for creating beautiful lampshade. Do DIY lampshade can be made from any materials that you find at hand. It can be any fabric you like, ribbons, beads and many other materials that, in your opinion, are suitable for decorating an original lampshade.
DIY lampshade for floor lamp everyone can do it. The main thing is not to set yourself too serious tasks. If you have never encountered homemade products and have a hard time imagining how to cope with the task, then it is better not to take risks, but to choose a simpler option for designing a lampshade.
A beautifully selected material, color and shape for the future lampshade will create a truly spectacular interior element. A neat and original floor lamp or other lamp can perfectly complement the design of a hall or other space.
It is not always convenient to make a lampshade from scratch; it is much easier to transform an existing one. In particular, this solution is much simpler for those who first decided to make with my own hands apartment decor and add a fresh touch. To create a new design for central lighting or a floor lamp, you need to take an existing lampshade or purchase the simplest one in the store inexpensive option. Each of the proposed options is good in its own way. In the first case, the former lampshade is not always in perfect condition, which accordingly can add problems when decorating it. In the second case, you will receive a whole new material to express your imagination, but at the same time you will incur small losses.
But in any case, from ready-made lampshade making a new one will not be as difficult as decorating a new one. What can be made from an old floor lamp? Having cut out, for example, parts from cardboard or plywood, they can be attached to an existing lampshade, painted in one color or covered with fabric. We will get a lampshade with new shapes. This solution is often used when parents want to create a fabulous design. Just imagine how great a boy’s room will look, decorated in a cosmic style with elements of unearthly planets, and a lamp made in the form cosmic creature or a small satellite. But making such a lampshade for a lamp using the above method is not difficult. Imagine a little, involve your child in the process, who is always full brilliant ideas that you wouldn't even think about. A little time and effort and you will succeed original solution for central lighting of a children's room. All guests who come to visit you will be delighted with the solution they see.
If you have a plain lampshade, you won’t have any problems with its design. Plain colors are an ideal material for homemade decoration, because here you can realize any wishes and ideas. For example, get original lampshade You can use appliqués, embroideries and even ordinary stickers, which can be found in many stores.
DIY lampshade - master class
We offer you an interesting DIY lampshade (master class), in which we will tell you how to create a work of art from an ordinary light lampshade. During the day our floor lamp will represent normal element interior, and at night it will turn into a wonderful decoration.
Our master class will be devoted to creating a lampshade in the form of a night city. To do this, we need the lampshade itself in light colors, yellow, orange or light pink shades are desirable. They will most closely resemble night lighting when the lamp is on. We take black fabric and cut out our model of a night city from it. These can be trees, buildings and even cars. Using PVA glue or any other glue, we glue our applications onto inner side of our lampshade so that no wrinkles form. You can sew a black ribbon on the bottom. Please note that it is better to stitch with white thread or thin ribbon. This will create the effect of a city road.
In daylight, our application will not be visible. And when the light is on, landscapes of a night city with houses and trees bathed in moonlight will open before us.
When choosing a colored floor lamp with bright ornaments and patterns for decoration, it is enough to slightly decorate it by adding pendants with beads of bright colors. It is possible to decorate with thin satin ribbons to create a more bright effect. This lamp will fit perfectly into. Thanks to such a small additional interior, she will be able to feel like a real princess living in fairy room with a nice interior.
How to make a lampshade with your own hands from scratch?
If you are interested in a question, how to make a lampshade with your own hands from scratch? Then you can just buy a few plastic folders and wire. From the folders, cut out the necessary parts for the frame, and use wire to connect them together. This solution will allow you to create a completely new, original and unique lampshade.
Before you begin any design of the lampshade, you need to take into account all the colors that are found in the room for which it will be intended. As you understand, the lamp must fit harmoniously into the interior of the room, match the texture and color scheme space. In addition, follow safety precautions. That is, if you have a baby who is still too small and strives to grab onto everything that comes his way, then try to design a more discreet version of a floor lamp or lamp that the baby will not reach out to. The fact is that we have more than once encountered situations where children pulled the pendants on the floor lamps and tipped it over on themselves, receiving various injuries. Let's not talk about the bad. Just try to take into account all factors other than beauty.
What materials are most often used to create a lampshade? The most common option is textiles. It is good not only for its flexibility and ease of use. Its popularity is also deserved thanks to the chic variation of colors, which allows you to decorate absolutely any floor lamp that is perfect for any interior, be it minimalism or ethno style. Among all the variety of fabrics, it is best to choose thick cotton or felt, which very quickly gain popularity among needlewomen. Felt – wonderful material to create a lampshade. It allows you to create a variety of multi-layer compositions, for example, DIY lampshade with butterflies.
If you don’t want to tidy up your old lampshade for central lighting, we suggest you very interesting option doing it from scratch. This option will not take much effort and time; it is good for any interior, especially for.
To create a new lampshade for a ceiling lamp, we will need a ball, glue and thick threads. Performed DIY thread lampshade very simple. Inflate the ball. Dip the threads in glue and wrap the ball in a random order. Just don't overdo it. There should not be too many threads; there should be enough space between them to allow light to pass through. In addition, it is worth leaving small space without threads on one side, this will be the bottom of our lamp, through which the light will flow. The creation process is almost ready, just wait a little until the glue dries, after which you can blow off the ball.
Our threads will remain in the form and form in which they were at the time of drying. If desired, our lampshade can be painted with paints in order to give it brightness and originality, while simultaneously combining several colors. Now all we have to do is hang our lamp on the lamp. As you have seen, there is nothing complicated about this. But the interior will receive a new note of originality.
To decorate an old lampshade you can use satin ribbons and even scraps of fabric. They can be sewn along the diameter of the fabric, thereby creating horizontal stripes. For example, you can make a combination of several colors. For example, let our lamp be bright Pink colour, and we will insert stripes in burgundy tones with bright small flowers. A combination of turquoise and brown. This lampshade is suitable for decorating the interior of a hallway or one of the rooms. A cute floor lamp can be placed in the nursery, and a brighter solution can be left for guests to see in the living room.
IN Lately people strive to create new and original elements for interior decoration with their own hands. Therefore, in their works they use absolutely unpredictable elements, among which we can note kitchen utensils, artificial leaves, bamboo and others no less interesting materials. Lampshades look unusual, the frame for which is made of transparent plastic, and the inside is covered with old slides, photographs or decorative stones.
As you noticed, making a new floor lamp or chandelier is not as difficult as it might seem at first glance. Everything is quite simple if your imagination works and you have a lot of brilliant ideas. Do original item interior design can be done using any available means, adding a little new look to their design. Imagine, experiment and you will be able to create bright interior, full of unusual and unique details of the overall composition.
An old or faceless floor lamp can ruin the entire impression of the interior. To change the appearance of a lamp, you don’t have to go to the store to look for best replacement. You can make a lampshade for a floor lamp with your own hands. We will tell you how in our article, and at the same time we will give ten original ideas homemade lampshades.
Original ideas for floor lamps made from scrap materials
You can make a lampshade for a floor lamp with your own hands from fabrics, as well as any available materials. There is no need to rack your brains and come up with a new idea - this has already been done before you. We have collected ten original lampshades, simple in design, but stylish and beautiful, which can become a designer “highlight” of your interior.
Everything ingenious is simple. When creating this lampshade, the effect of shadows was used. A stencil cut from dark paper is mounted on a light lampshade, which you can make from cotton, linen or silk fabric.
An original solution for a round lampshade made of thin paper or plastic straws. By the way, the shape can be either cylindrical or cone-shaped.
Regular satin ribbons, woven in a checkerboard pattern, and flirty bows made from them can give the lamp a surprisingly elegant look.
This model combines several techniques: applique, embroidery and quilling. A little complicated, but so beautiful!
Do you have a napkin knitted by your grandmother lying in your closet unnecessarily? Find a use for it.
Plastic spoons will also work. It will turn out funny and exclusive.
Is your old school globe sitting idle? Half " globe” may well become a lampshade.
Used photographic film is an excellent material for floor lamps. Moderately plastic, it sticks well, forming a cylinder, and the light, refracting through the frames, casts fancy patterns on the walls.
Can you guess what this modernist masterpiece is made of? We will tell you: from ordinary tetrapacks folded in a special way and cut into pieces.
Disposable paper plates can also be an excellent material in the hands of a craftsman. Watch the video:
Tools and materials
One of the most simple ways do DIY lampshade- is to make it from felt. This fabric is not classified as expensive, and therefore ready product It will end up being quite inexpensive. However, keep in mind that using felt is only permissible when the lamp contains energy-saving and LED lamps. Conventional incandescent lamps become very hot when the floor lamp is turned on, and the material can ignite.
One more nuance: today our stores sell felt of various colors and densities. The denser and darker the fabric, the less light it will transmit. These floor lamps are best used in the bedroom, where soft, intimate lighting is appropriate.
Don’t forget about the color shades of the fabric, because they determine how warm or cold the lighting in the room will be. Coral, orange and yellow lampshades will add coziness and warmth to the interior, while blue, green and purple lampshades will add coolness and freshness.
The frame of the lamp also influences the choice of fabric. If it is unattractive and needs to be hidden as much as possible, choose thick felt. In other cases suitable fabric take it easy.
To make a lampshade for a floor lamp with your own hands, you will need:
- felt. To find out the dimensions of a piece of material (we have a floor lamp in the form of a truncated cone), put a mark on the upper, smaller rim of the frame - it will become a “reference point”. Attach the frame to the paper in this place and, while rolling, draw with a pencil lines marking the passage of its upper and lower rims. Add 10 cm to the height of the frame - and you will get a “pattern” for the future lampshade, according to the dimensions of which the material should be measured;
- quick-setting adhesive capable of gluing fabric and metal;
- paper. We will cut out stencils from it, so you can even use old student notebooks;
- scissors;
- simple pencil.
We will assume that you have an old floor lamp frame. But if you don’t have one, it’s easy to make a base from metal wire.
Instructions for making a floor lamp
When measuring the frame, you have already made a pattern on paper. Place it on the felt, draw outlines with a pencil and cut out. Find drawings of butterflies on the Internet, redraw them or print them (it is enough to transfer only the outlines). Apply the resulting stencils to the fabric and use a pencil to mark the contours.
It's better to use stencils different sizes and place them randomly: along the top, center and edge of the lampshade.
Cut out the butterflies, but do not cut all the way through. Lift the wings slightly by pressing them with your fingers.
Apply glue to the rim.
And glue the blank to it.
Finally, glue the joint of the lampshade.
Attach the lampshade to the lamp.
Take it for yourself and tell your friends!
Read also on our website:
show more
Lighting can either transform or make any room uncomfortable. Suffice it to recall cold hospital corridors, and, for example, cafes, where there is always soft warm light.
Especially in winter, people miss the sun, so it is very important that there is always light at home. Special cozy atmosphere can be created using various lamps or floor lamps. However, it is not always possible to choose a lamp that matches the interior of the room. But don’t be upset, because you can do it for any lamp.
DIY frame and base for lampshade
First you need to select a lamp or several lamps for which you need to make fabric lampshades. It is better to use lamps with energy-saving or LED lamps. Regular light bulbs can simply burn the fabric, so it’s better not to take risks.
Before you begin, you need to remove the frame for which the lampshade will be created. If the lamp does not have a frame, then it can be purchased, for example, in a special store or construction department.
Also a frame for any lamp, be it a floor lamp, desk lamp or a chandelier, you can make it yourself. To do this you will need thick wire and pliers.
The base can have any shape. It will be easier to make a lampshade for a cylindrical or cone-shaped frame.
How to choose fabric for a lampshade
First of all, you need to choose suitable fabric for the lampshade. Can be used light, hard or dense material. If desired, you can even make a lampshade from wool, it all depends on the creator’s idea and the interior of the room.
If the frame consists of ordinary wire, it is better to use an opaque material to cover it. Dark silk, cotton and taffeta are suitable.
It is also worth remembering that the color of the fabric can give both cold and warm light. In the first case, you can use blue or green fabric, and in the second, yellow, orange or red.
Necessary materials for making a lampshade
Fabric lampshades can be done different ways. If the new lampshade is glued on top of a regular plain lampshade, then there will be no preparatory work not required.
But if there is only a wire frame, then it is better to first coat it with paint and then wrap it with light or dark cotton tape.
To make the lampshade look neat, you need to sew it on a typewriter.
In addition, you will need:
- iron;
- a simple pencil;
- ruler;
- textile;
- pins;
- threads matching the color of the material;
- kraft paper (or any thick paper, as well as whatman paper);
- glue (you can take a special one for fabric or a universal one).
When all necessary materials and the tools are at hand, you can start sewing DIY lampshade made of fabric.
Master class on making a lampshade with your own hands
First step
First you need to make a template to cut required amount fabrics.
There are two ways: if the frame is cylindrical, then you can measure the circumference and draw one line on the fabric, and then measure the height and draw a second line. After this, all that remains is to draw two more sides of the rectangle and cut out the template.
If the frame is cone-shaped, then you can lay out the paper, take a pencil and gradually roll the frame along the sheet, mark with a dotted line the lines of its sides.
The main thing is that the frame rotates completely; to do this, you can mark a reference point on it using a piece of thread or a pin. After this, you can connect the lines and cut out the template.
Second step
In order not to cut off more, or worse, less fabric, you need to attach the template to the frame of the lamp - it must completely fit. If the template is larger, you need to cut off the excess paper; if it is smaller, you will have to take the measurements again and make a new template.
Third step
When the size of the template matches the size of the base for the lampshade, you can begin to attach it to the fabric. If the material has a pattern, you need to position the template so that the drawn elements “look” in the right direction. You need to calculate everything so that, for example, you don’t cut off the head of a flying bird. Otherwise the lamp will look ugly.
The template must be applied to the wrong side of the fabric, and then it must be secured with pins. After this, you can carefully trace the template along the contour. If the fabric is dark in color, you can use not a simple pencil, but special fabric crayons or a piece of soap.
After this, you need to draw allowances. To do this, you need to draw lines at a distance of one and a half to two centimeters from the boundaries of the template.
Fourth step
Without removing the template from the fabric, you need to carefully remove the pins one at a time and wrap the seam allowances inside. The fold lines must be secured with pins.
Now you need to remove the template and fill sewing machine. The threads must be chosen so that they are almost invisible on the fabric.
Fifth step
Now you need to sew the resulting part on a typewriter. This needs to be done only on three sides - one of the sides must be left untreated in order to then form a seam on the frame itself.
You need to stitch at a distance of five to seven millimeters from the edge. If desired, you can process the sections. But in any case, they will have to be hidden when the fabric is glued to the frame.
Sixth step
After this, you need to turn on the iron and iron the fabric piece well. If wrinkled parts remain, the fabric will not adhere well to the base, and the lampshade will look ugly.
Seventh step
The next part of the work must be carried out in a well-ventilated room. First you need to lay work surface waste paper or an old tablecloth and lay out the fabric. Then you need to apply glue to it and leave it for some time, which is indicated in the instructions for the glue.
Eighth step
Now you can glue the fabric to the frame. You need to hide the raw cuts, and make the seam in such a way that the lampshade is covered with a stitched edge.
If the lampshade is attached to a wire base that is wrapped with cotton ribbons, there is no need to apply glue to the entire surface of the workpiece; it is enough only to the part that comes into contact with the frame parts. In this case, you need to stretch the fabric well.
Ninth step
The finished lampshade must be left for some time to dry completely. After about a day, you can put the lampshade on your favorite lamp and enjoy a beautiful object that will definitely decorate any interior.
Fabric lampshade decoration
Table lamp with lampshade looks much nicer than just a regular bare lamp. But if a monochromatic color is chosen for the lampshade, then you can decorate it in an original way. Here are some ideas on how to do it interesting decoration fabric lampshade.
Lampshade in Provencal style
In order to decorate a plain lampshade, you will need a piece of fabric and fringe. Usually green, turquoise and pastel shades of colors are used, checkered colors or floral patterns are also suitable.
First, you need to select a suitable fabric for a plain lampshade and cut two strips from it - one to decorate the top of the lampshade. This strip of fabric should be long enough to completely wrap the circle and make a bow. The second strip should be the length of the circumference of the bottom of the lampshade, and fringe must be sewn to it. This can be done on a sewing machine.
All free edges of the fabric must be processed so that it does not fray. After this, using glue or thread with a needle, you need to attach the fringed ribbon to the base of the lampshade so that the fringe hangs down.
Then you need to decorate the top of the lampshade. To do this, you need to glue or also sew a ribbon along the circumference, and tie the free edges with a bow.
For lampshade in provencal style You can also use lace. The good thing about this element is that it can simply be glued to the fabric.
You can make lace flowers, stripes, or completely cover the fabric lampshade with lace napkins.
Lampshade with fabric flowers
Another one unusual idea which will allow table lamp with lampshade to become like a flowerbed - decorating with fabric flowers.
Fabric in delicate shades is perfect for flowers; you can use, for example, organza or chiffon, or you can simply take, for example, an old jacket, cut strips and twist them into roses.
You can decorate a lampshade with just a few flowers, but if you have time and patience, you can make a whole bunch of flowers to completely cover the lampshade.
DIY lampshade made from scraps
If you have many pieces of different fabric at home, you can make a lampshade from multi-colored scraps.
In order to make such a lampshade, you need to use the technique of sewing pieces to a fabric base. The easiest way is to cut a piece of fabric to the size of the frame and divide it into several wedges.
Then you need to sew patches to each wedge the way you like - you can sew strips of fabric diagonally, or make small squares. To avoid delaying the process, it is better to use a sewing machine.
After this, all the wedges with patches will need to be sewn together and glued to the base of the lampshade.
This lamp can fit perfectly into a country style!
Lampshade made of unusual materials
When you make a lampshade yourself, you can give free rein to your imagination and experiment. To make an original thing, you first need to find unusual material.
For example, in the kitchen, a lampshade made from burlap can look very interesting. This fabric transmits light well. Such a lampshade can be decorated with some wooden parts, for example, clothespins or wooden beads and buttons.
You can also use grandma's old lace doilies for decoration. You can also write something on such a lampshade with white or black paint, as they usually write on bags.
For a teenager's room, you can sew a lampshade in . For this you will need denim. And you don’t have to buy it, you can just cut up old jeans - every person probably has such a thing.
Such a lampshade can be decorated, for example, with a denim pocket where you can insert artificial flower or a piece of a checkered handkerchief. You can also use applique for such a lampshade. Pieces of leather are suitable for this.
For example, for a lamp that will stand in a girl’s room or bedroom, you can sew a delicate lampshade from mesh. This fabric can be found in any sewing store.
A lampshade made of several layers of mesh will look interesting - it will resemble a ballerina’s tutu or a fluffy skirt.
If you are one of those people who really don’t like boring things, and you prefer to see only unique interior items in your apartment, then you should think about making something amazing for yourself.
If we consider the picture in general, you can do anything with your hands, and it will not only be beautiful, but also unique. But, of course, it’s worth starting with the simplest. To begin with, do exactly that thing that is always in sight, that you will see constantly.
Such things include chandeliers and lamps. We suggest making a lampshade for a table lamp with your own hands. Of all the lamps, it is the easiest to make. In addition, a table lamp can be an amazing gift.
How to make a lampshade for a table lamp?
Making lampshades for table lamps is quite exciting. And it’s not at all as difficult as it seems at first glance. This requires a little patience, effort and, of course, some materials.
Master class - lamp shade
To make a lampshade in our case you need:
- the basis;
- wire;
- a piece of tulle;
- textile;
- beads.
So, let's start making a unique lampshade:
- Take your old lamp, whose shade has long been broken. If you don’t have one, then buy the most inexpensive primitive lamp in the store. In stores that sell lamps, you can buy a table lamp without a shade for pennies.
- And now that we already have the base itself, we need to make a frame. We make it from wire; it’s better, of course, to involve your husband in this matter. If your ceiling is intact, it’s just old and inconspicuous, and you decide to update it, then you don’t need to make a frame.
- We put aside our base, lampshade or frame for a while and begin creating the decorative elements of our lamp. Take any fabric you like and cut circles out of it. Their diameter depends on how big you want the flower. Our diameter is 5 cm.
- If you don’t have special hot scissors that immediately cut the edges of the fabric when cutting so that they don’t fray, use a candle or lighter. If the edges of the fabric do not fray, they do not need to be processed.
- Then take a needle and thread. Sew the edges of the fabric and tighten them well. You will get a beautiful petal. Make a large number of these petals.
- Next, we proceed to assembling the flower itself. Take five petals and sew them at the very base along the edge, close them into a ring and sew the first and last petals together. You will get a wonderful flower, in the middle of which you need to insert a bead, seed beads, sequins, button or other material. It depends on your wild imagination. Do this with all the petals.
- When you have created a sufficient number of flowers, take your frame or lampshade and proceed to the most interesting stage.
- If you attach your flowers to the lampshade, then simply glue them using glue like “Moment Crystal”. It is completely transparent and will not leave any marks, even if it comes out a little in visible places.
- If you have made a frame, then it is better to cover it first. Old, unnecessary tulle is suitable for this. And already sew yours on it flower garden. By the way, you can make the flowers multi-colored and arrange them in a certain pattern. Here you just need to give free rein to your imagination. We ended up with a lamp like this.
![](https://i0.wp.com/womanadvice.ru/sites/default/files/imagecache/width_300/38/2015-07-15_0010/abazhur_dlya_nastolnoy_lampy_svoimi_rukami_1.jpg)
![](https://i2.wp.com/womanadvice.ru/sites/default/files/imagecache/width_300/38/2015-07-15_0010/abazhur_dlya_nastolnoy_lampy_svoimi_rukami_2.jpg)
![](https://i1.wp.com/womanadvice.ru/sites/default/files/imagecache/width_300/38/2015-07-15_0010/abazhur_dlya_nastolnoy_lampy_svoimi_rukami_3.jpg)
![](https://i1.wp.com/womanadvice.ru/sites/default/files/imagecache/width_300/38/2015-07-15_0011/abazhur_dlya_nastolnoy_lampy_svoimi_rukami_4.jpg)
![](https://i2.wp.com/womanadvice.ru/sites/default/files/imagecache/width_300/38/2015-07-15_0014/abazhur_dlya_nastolnoy_lampy_svoimi_rukami_8.jpg)
And finally little advice. If you are making a frame, don't make it too narrow. This will allow you to decorate it with flowers made from even the lightest fabric.
We are confident that such a table lamp will not only not go unnoticed, but will also surprise all your guests.