How to make your own lampshade. DIY lampshades for chandeliers: original ideas and decorating workshops

We create our own home. And how cozy it will be depends on us. Even if you are the temporary owner of your home, you can make it cozy without major expenses. The main thing in this matter is to put your soul into it. But having ennobled the walls and windows of the apartment, you cannot leave a single light bulb hanging from the ceiling bare. Let's think about how you can make lamps with your own hands.

Advantages of homemade lampshades

The need for hand made lamps is dictated by various circumstances: some were unable to choose a chandelier for the updated interior, some have a difficult financial situation, and others feel the need to decorate their home with their own hands.

Advantages homemade lampshades:

• independence from store assortment;
• low budget;
• self-realization;
• uniqueness (exclusivity);
• originality;
• availability of material for work.

Materials

The chosen concept should help you decide on the choice of material for the lamp. What is your room like, what lamps are suitable here, where will they be located (on the wall, ceiling, floor)? In this case, the material for the lampshade can be completely different things: threads and veneer, bottles and branches, paper and basin, cup and lace, wire and disposable spoons, fabric and beads. From the frame and scrap materials you can make real beauty.

Lace lampshade

To make it you will need about 10 knitted identical or different napkins of one or more colors (optional), balloon, wallpaper glue and container for it, brush, thread, light bulb socket, light bulb, oilcloth or newspaper for bedding. The exact number of napkins depends on their size and the size of the ball.

The sequence of our actions:

• Dilute wallpaper glue (one pack should be enough).
• Inflate the balloon and tie it.
• Tie it so that it is approximately in front of your eyes or below. For example, on a clothesline or stepladder.
• Spread one napkin on the mat and coat it generously with glue.
• Carefully glue the napkin onto the ball.
• Spread the next napkin and glue it so that one napkin lies slightly on top of the other.

• Glue all the napkins, lightly connecting them to each other.
• Leave a small hole at the bottom without a napkin so that you can install the socket and light bulb later.
• Your ball should dry for about a day.
• After a day, making sure that the glue has dried completely, pierce the ball and remove it from the lampshade.
• If you want to give the lamp a different color, before piercing the ball, paint the napkins with acrylic paints and leave them to dry again.
• Thread an electrical wire through the center of the napkin at the top point of the lampshade, to which the socket will later be connected. Attention! Don't forget to disconnect the power supply from the wires!
• Install the cartridge.
• Screw in the light bulb.

If you are installing such a lamp on an already hanging socket, you can do the following:

• at the top point of the lampshade, leave a circle with a diameter of approximately 10 cm;
• hang a circle of cardboard on the cartridge to match the napkins with a diameter of approximately 15 cm;
• Carefully pass the cardboard inside the lampshade and fasten them together with a stapler or double-sided tape.

Lamp made of plastic bottles

Most likely, no one will name how many options for lampshades made from plastic bottles exist. But there are two principles of use: the bottle is decorated with other materials, or elements for decoration are cut out of the bottle.

To implement the first principle, we need a three- or five-liter bottle. Its neck will be put on the cartridge, and the bottom needs to be cut off. If the bottle is made of colored plastic, then the most simple chandelier for simple country house already ready. But plastic can be painted with designs, and small elements such as buttons, pieces of mirrors, and shells can be glued with liquid nails. Or cover it with acrylic paint of one color, and apply an uneven layer of paint of a different color on top using a comb. In more complex version Plastic disposable spoons without handles in the form of scales are glued all over the bottle.

Such a lampshade will be harmonious with retro style.

To implement the second principle, you need bottles of any size, but different colors. Cut out any shapes from them: leaves, flowers, geometry. The main thing is that there are a lot of them. The lampshade will need a frame in the form of wire rings. Different levels connect the frame together with a vertical wire. Using fishing line or thin wire, attach a huge number of cut out figures to the frame. They can fit tightly to the frame or hang freely from it.

Paper lampshade

Cardboard, rice paper, self-adhesive, corrugated - whatever kind of paper is used for homemade lampshades. For the Art Nouveau style, we suggest you make a lampshade from multi-colored cardboard ribbons. Choose colors. Prepare strips 2-4 cm wide, a stapler or good glue. Randomly thread the strips into each other, fasten them in such a way as if you have a lump of remnants of different threads in your hands. It should not be tight so as not to interfere with the light bulb.

Size is at your discretion. By slightly spreading the strips, you can easily hang the ball on the cartridge.

Use an energy-saving lamp - it heats up less and is safer.

Grapevine lampshade

To make a lampshade from wood, you need to select suitable driftwood or branches and process them properly. In the case of a vine, almost any one will do, with stepsons and even dry leaves. Such a lamp can be wall-mounted, floor-mounted, or ceiling-mounted. It requires a metal frame of any shape through which the branches will be passed. When the lampshade is ready, cover it with furniture varnish - it will be very beautiful.

How to make one from threads and a ball?

One of the simplest but most original ideas is a lampshade made from threads wound around a balloon. We need threads (woolen, twine, thick cotton), PVA glue, brush, balloon, Vaseline.

• Inflate the balloon. The larger it is, the larger your lampshade will be. A more common option is a round ball, but who said that this is necessary? Perhaps your chandelier will have three oblong shades.
• If your lampshade has an open bottom, then draw a border on the ball for further winding.
• In order for the ball to be easily detached from the threads later, coat it with Vaseline using a brush.
• As you wrap the threads around the ball, coat them with glue, layer by layer. Don't skimp on glue.
• The more layers, the stronger the structure. Try using threads of different textures, winding them in different directions.
• Leave your chandelier to dry.
• After about 24 hours, pierce the balloon and remove the remains from the lampshade.
• Carefully cut out the hole for the cartridge.
• Insert the light bulb - the lampshade is ready.
• If it is monochromatic, then it can be decorated with artificial flowers, airy butterflies or other small elements.

photos

Lampshade for a standing lamp: master class

Such a lamp is not only in the field of vision, but also in the field of touch.

To create a pleasant atmosphere, do floor lamp soft:

1. Choose a boa or fringe with fluffy threads in one or more colors.
2. Glue a boa or fringe onto the old lampshade strictly along the circumference, wrapping it around the lampshade several times.
3. You can decorate with colored material not only in a circle, but also chaotically, with spots.
4. If desired, you can decorate the lamp leg and the base itself.

The design itself will be voluminous and will not require additional elements.

Making for a wall model

The house lamp looks great on the wall. He can be absolutely different models. But if you install such a lamp in a child’s room, place the baby’s favorite toy (for safety reasons, not fabric and away from the light bulb) in the door of the house where the light comes from.

No less interesting are the figures from dense materials(cat, flower, month), planted on a frame. The light does not come through the figure, but from under it, scattering the beam. As a rule, sconces are used specifically to dim the light, which means that any opaque models would be appropriate here.

photos

Handmade options for street lighting

Speaking of street lighting, we mean the area in front of a private house or cottage. Although, if you live in a multi-story building where people take care of what they have in the yard, then these ideas may suit you too.

Lighting the area in front of the house can be:

• facade, when lamps are mounted on the walls of the house and veranda;
• landscape, which can highlight the beauty of your site, emphasizing paths, plants, figures;
• street, represented by lanterns that create diffused light in the area.

The types of light source are also different:

• from the mains;
• from batteries;
• from solar panels.

Facade lamps can look different: LED strip around the perimeter of the house, sconces made of driftwood and branches. The light source will be the electrical network.

Much more imagination can be used in landscape lighting. Mount in several animal figures and fairy-tale heroes make multi-colored battery-powered lamps from plaster, wood or polystone and place them around the area - the effect will be stunningly beautiful. But turning it on and off is inconvenient. Try installing solar-powered lights. In the evening they will light up on their own.

Throw LED strips powered from the mains onto trees and shrubs, and in the evening you will find yourself in a fairy tale. In stores and on the Internet, they sell lamps that operate on the principle of solar panels, with a stand that you simply need to stick into the ground in an arbitrary place. In this way you can decorate a pond or gazebo. The glass of the lamp can be pre-coated with a pattern or plain paint.

If there is no electricity or solar panels, then the evening will be brightened up by candle lamps hidden in glass jars and suspended from a gazebo, fence, trees. Jars can be decorated using threads, paint, colored self-adhesive paper, and corrugated paper. But be careful with such illumination - open fire loves the careless.

It is not always possible to find in stores an offer of lamps that meets our needs. Often an old lamp takes on a rather unsightly appearance, and it’s a shame to throw it away. Why not try to design your own lighting and make your own lampshade for a table lamp?

Where to start, where to find inspiration? What materials are needed? You will find answers to these questions and several interesting master classes in this article.

DIY paper lampshade for a table lamp

Lamps with paper lampshades are not products that are made exclusively by craftsmen. Similar caps for lamps are sold in many stores that sell lighting and furniture for home interior. Their price, as a rule, differs significantly from the cost of production. For this reason, many people decide to purchase cardboard, paper, and make them themselves. How to make a lampshade for a lamp out of paper with your own hands?

Paper selection

A paper lampshade can take various shapes and used in interiors various styles. What paper should I buy?

1. For manufacturing, it is necessary to purchase sufficiently high-quality and suitable paper, since the durability of the product directly depends on this.
2. The paper cannot be thin, like regular paper, as this will quickly destroy the product.
3. It must let light through.

The best option would be a rice paper cap. This material, despite its small thickness, is very durable. Rice paper is sold in sheets of various sizes. For example, a sheet with a colored pattern can have a size of 50 x 70 cm.

Made from rice paper

Rice paper can be glued on old lamp, giving it the new kind. You can also delete old material and wrap a new metal frame. Sometimes the paper is additionally decorated using special stamps. This allows you to add additional decor to plain paper.

White paper lampshades are not just a tribute Far East, they are perfect for a Scandinavian-style interior. Almost anywhere where muted colors dominate, natural materials, you can safely use such solutions.

From wallpaper

Another one interesting idea, which does not require virtually any financial costs - a lampshade made of wallpaper for a floor lamp or table lamp. The most popular option is accordion-folded paper. Wallpaper left over from a recent renovation will be useful for this purpose; such an interior element will fit perfectly with the walls. If there is no wallpaper, you can always buy a roll from leftovers; large stores usually offer favorable discounts on such products. From wallpaper you can make a lampshade for a table lamp, using the existing frame, or for pendant lamps.

What you will need:

• a piece of wallpaper;
• ruler;
• pen;
• hole puncher;
• lace.

How to make a lampshade from wallpaper - master class

This is a simple solution that even a child can do.

DIY lampshade made from mesh

IN modern apartment, issued in industrial style, and also in the garden a lamp made from metal mesh and from wire.

The mesh can be formed into any shape you like and the ends connected, for example, with thin wire.

Then, using wire, the mesh is attached to the top of the cable with the light bulb.

The shape of the lampshade is usually reduced to a ball or ellipse, but you can make any option, for example, a parallelepiped. To obtain this shape, you must use a frame made of durable wire or thick cardboard. The lampshade can be complemented with artificial flowers and intertwined with colored laces. As a result, the mesh loses its harsh minimalist character and the product can be used in an interior of a different style.

Made from lace

Lamps with lace lampshades will add lightness and elegance to the interior. Depending on the type of lace, they provide diffused or bright light. This lamp is suitable for:

• living rooms,
• bedrooms,
• children's rooms.

The main material required to make the body is lace. However, due to the relatively high price, lace can be replaced, for example:

• unused lace doilies;
• a piece of lace fabric;
• remnants of tulle curtains for windows.

The lace needs to be cut into circles, squares or stripes. The most labor-intensive process is gluing individual elements with glue. You can use regular wallpaper glue.

A lampshade for a chandelier looks very romantic, made from lace created with your own hands using a hook and a thin thread. Such a product will decorate a needlewoman’s room and will be an excellent demonstration of the needlewoman’s skills.

From beads

In this case, beads are used instead of paper and fabric. Made from beads, the glamorous lampshade lets in a lot of light. Its implementation is simple and the end result is definitely amazing.

You will need:

• lampshade frame,
• fishing line,
• beads.

Work order

1. Attach the end of the fishing line to the frame.
2. String beads or beads, making knots so that the balls do not move.
3. Then attach the other end to the frame and place the strings with beads about 3cm apart.

Making a lampshade from threads with beads can be a little more labor-intensive than making crafts from paper or lace, but the unique and impressive decorative effect more than makes up for it.

So there are many interesting ways how to make a lampshade with your own hands. Using the above recommendations, you can refuse to buy an expensive, non-original lamp and add a unique decorative item to your interior own production.

Master class on making a lampshade at home - video

A homemade lampshade for a table lamp or floor lamp is created from different materials. Using improvised means you can make any decor. For this, fabric, thread, paper, etc. are used. The choice of design is also unlimited. It is only necessary to take into account the color scheme of the product and its belonging to the style direction in which the interior of the room is made.

A lampshade for a table lamp is made with your own hands from improvised materials or specially purchased decorative elements. The purpose of this work is to create original design, which will decorate the room and emphasize the style of the interior. In addition, it will not be possible to purchase the same product in a store, because it is unique.

To ensure that a lampshade made of fabric or other material is not only functional, but also attractive, it is important to follow the manufacturing instructions. Then the design will look neat. In this case, the design features of the product are taken into account.

Frame and frameless structures

All such decorative elements are divided into 2 groups:

• frame;
• frameless.

In the first case, the structure is rigid and does not deform over time. To impart the desired properties to the base, it is necessary to use durable materials: wire, wooden products, plastic fixtures. To get the frame the desired shape, it is better to choose wire.

If you have on hand wooden hangers or a plastic bucket, you can make a lampshade for a table lamp from them. You can create a structure of some shapes - cylindrical, cone-shaped. The number of possible options is limited.

Frameless structures often do not last long. They do not have a rigid base, therefore, under the influence of mechanical load during intensive use, such products are deformed and lose their appearance. Some design options can be repaired, others can only be recycled and a new decorative element can be created. For example, it will not be possible to renew a wicker lampshade (made of starched lace) if it breaks.

The advantage of frameless products is the high speed of work when creating most models. In addition, in this case you will not have to select a base, which can create difficulties if you need to make a lampshade of a given shape. The absence of a rigid base helps reduce the cost of the product. To create it, adhesive mixtures or starch are often used (if the decorative element is fabric).

Options to consider:

• materials that are purchased specifically for creating decor;
• improvised means.

The first group includes fabric, threads (including floss), cardboard, paper, and ribbon. The second group includes ready-made knitted napkins, a clothesline, a plastic bin for office waste, hangers, disposable cutlery and much more. The options can be even the most unexpected, for example, Tetra Pak juice packaging. There are no restrictions on selection. It is only important to take into account the degree of complexity of manufacturing an attractive design from the material you like, even if its cost is minimal.

When creating a lampshade from paper or other material, it is necessary to take into account not only the external properties of the structure. You should select available means so that during operation of the finished product a dangerous situation does not arise. This is due to the fact that the materials come into contact with the wiring, and can sometimes touch the light bulb. When using a halogen light source, it is necessary to exclude the possibility of a dangerous situation arising due to the high risk of explosion: such a lamp becomes very hot and may burst if it touches a decorative element during operation.

When considering options for how to make a lampshade with your own hands, it is necessary to choose low-power lamps as a light source, which emit a minimal amount of heat when heated. For example, an LED version of the lighting element is suitable. Its disadvantage is its higher cost compared to analogues. Fluorescent lamps They also consume a minimal amount of electricity. They hardly heat up, but they contain mercury vapor, which can cause a dangerous situation, for example, if a lampshade made of threads becomes deformed.

Other options:

• It is recommended to use a ceramic cartridge, since the plastic counterpart dissipates heat worse and such a product may darken if you install a powerful lamp (halogen or incandescent);
• the distance between flammable materials and the socket, wiring is controlled: it is not recommended to place decorative elements closer than 5 cm from the electrical component of the structure.

How to make a frame for a homemade lampshade

You can use the base of an old lamp if you have an option on hand that fits the shape. As alternative solution Considering the possibility of purchasing an inexpensive table lamp. It should be disassembled and all unnecessary parts removed. Sometimes it’s easier and faster to make a frame for a lampshade with your own hands. In this case, any available or special materials that are characterized by sufficient rigidity are suitable.

Wire mesh

This is the easiest option, due to the possibility of using a ready-made mesh fabric. Reinforcing mesh is used as the basis for a chandelier, floor lamp or table lamp. It is made of metal, has a fairly high rigidity, and lasts a long time.

To make it, you don’t need any available tools, you just need to prepare a piece of mesh fabric. The rectangle must be rolled up to form a cylinder. The edges are fixed using protruding sections of mesh wire. To do this, you need to make a cut in such a way that longer rods remain on one side. They are connected to the opposite end of the mesh.

• aluminum;
• steel wire.

In the first case, the work is done faster, because the wire bends better, but it holds its shape less well. The steel analogue, on the contrary, is durable, but the manufacture of lampshades in this case is difficult due to the complexity of creating a product of the required configuration. The main nuances of making a frame:

1. Depending on the design, 1 or 2 rings are made. To do this, use pliers and wire cutters. If 2 rings are used, their diameters must be different.
2. The finished structural elements are connected using straight racks made of the same material. The edges of the wire should be wrapped around the rings. The number of racks depends on the design.

From the office waste basket

In this case, the frame can be considered ready for finishing work. However, in order to make a lampshade for a floor lamp with your own hands, you must also provide a hole for fixing the socket and making it possible to supply the power wire. To do this, cut a hole of sufficient diameter at the bottom of the basket. You can also adjust the height of the structure. If necessary, the basket is trimmed to fit its circumference.

From a five liter plastic bottle

You will need a large bottle. The choice of option is made taking into account the dimensions of the decorative element that is planned to be created. You need to cut the bottle. The upper part (with the neck) will be used as a frame. In order for the structure to be ventilated, it is recommended to cut out straight sections (between the ribs of the resulting dome). This measure will not have a significant impact on the degree of rigidity. If the cartridge is large enough, the neck of the bottle is also cut off.

Other frame material options

You can use wooden planks of small thickness. They are thin enough that they can be bent. As a result, it becomes possible to make a ring. The strips will be fixed on it. Metal brackets are used for fastening. An alternative, but less suitable option is small nails.

If you have it on hand welding machine, you can create a durable structure from metal rods of small diameter. They are not subject to bending, so it is difficult to form a lampshade with smooth lines. The design will be rectangular or triangular.

Making lampshades on a frame

The choice of option is made taking into account the degree of rigidity of the base. If you create a lampshade yourself, macrame, clothesline, fabric or ribbon are the most suitable options for finishing rigid frames. Such materials can be tightly stretched onto a metal, wooden or plastic base. As a result, the product will better hold its shape.

Covering the frame with fabric

To make the structure look attractive, it is necessary to use material with a processed edge. If you have sewing skills, you can carefully tuck the fabric after reupholstering. The fabric for the lampshade is selected in accordance with the style direction of the interior. You can fix the edges of the canvas that covers the frame with glue.

Covering the frame with tape

There are many design options for the lampshade in this case. A tape up to 2.5 cm wide is used. Its edges are fixed with glue. Stationery or PVA will do. While the composition has not dried, the material is additionally secured with a needle. Then they begin to cover the frame with tape. You can use the technique of longitudinal or longitudinal-transverse arrangement of stripes. They can also be placed at an angle relative to the frame ring.

The principle of this technique is the same as in the case of tape. First, secure the edge of the rope to the ring. You can make a knot if you plan to perform additional finishing on the edge of the lampshade. Re-upholstering lampshades does not take much time. The rope is wound around the frame in any direction (horizontal, vertical, at an angle).

Making a frameless lampshade

This option is better to choose if you plan to decorate a sconce, floor lamp or pendant type lamp. With regular use when installed on a table lamp, such a product will quickly lose its shape.

Lampshade made of knitted napkins

Lampshades made of thin threads are used. You will need glue (for vinyl wallpaper), a large ball (the diameter is determined by the size of the future lampshade). The napkins are glued individually on a flat surface, then placed on the ball. The edges overlap. When the lampshade dries, the ball is deflated and removed. To fix the cartridge, a plastic holder is provided - from the neck of a 5 liter bottle.

In this case, it is necessary to use the weaving method. Using a rope, a pattern or fabric is created consisting of knots of the same type. The choice of option is made taking into account personal preferences. To give the product a round shape, use a large ball. The rope can be additionally treated with glue, but it is already quite rigid and will hold its shape well.

Lampshade made of thick threads or yarn

This is the most common option and is easy to implement. Inflate the balloon and begin to cover it with thread moistened with PVA glue. The degree of transparency of the product depends on the density of the thread and the number of layers. The mounting of the cartridge is the same as in the case of the version made from openwork napkins.

It is possible to create a lampshade from wicker. The material lasts a long time and does not lose shape over time. Moreover, additional decor of the lampshade is not required in this design. It is easier to make a round lampshade, since the vine bends well. In this case, the weaving method is used. No additional elements are used to secure the vine.

Making a frame lampshade with your own hands

Preparation. Determination of shape and size

The choice of option is made taking into account personal preferences. However, it is important to take into account the subtleties of the design of the room: color scheme, style, predominance of shapes of other objects (straight, curved lines, etc.). It is also important to choose the right material.

For example, a product made from paper with your own hands is not suitable for the interior in classic style. In this case, it is better to decorate the table lamp shade with fabric and ribbons. Complex weaving patterns are often used. The shape of the lampshade must be such that the product does not cause inconvenience during operation of the lighting device.

In accordance with the dimensions of the future lampshade, the wire is cut. It must be twisted to form rings (2 pcs.). The diameter of the upper and lower products differs by 1.5-2 times. The rings are connected with metal rods. They will play the role of stiffeners. The quantity can be any.

We cover the frame with the selected material

Fabric is often used. You need to make a blank out of cardboard. They wrap the finished frame with it and trim it until the desired shape is obtained. The workpiece is applied to the material laid out on a flat surface. Make allowances of 2-3 cm on each side. Outline the outline. The workpiece is removed. The fabric is cut along the contour. The edge is then folded over and stitched on sewing machine. However, this stage is not mandatory.

We process the edges. Masking the connection points

If the edge has not been pre-processed, the frame is first covered with the workpiece made. The fabric is attached with glue. The edge is turned up on all sides and glued.

Decorating the finished lampshade

There are many options for improving the appearance of a product. So, if the fabric is plain, light, then with inside decorative elements pre-cut from cardboard are attached, for example, in the style of a night city. They use a simplified version of the image - the outline of houses, several small windows. As a result, when the lamp is turned on, a shadow from this blank will appear on the lampshade.

The fabric combines well with ribbons. If the edge has not been carefully processed, tape is fixed along the circumference of the frame. Decorative buttons are used to decorate the lampshade. If the interior allows, complement the design with fringe along the bottom of the lampshade.

Nowadays, many people strive to ensure that their home always has an atmosphere of comfort and beauty. As a rule, we do this with the help of various ideas that help us decorate the house in a certain style. We also try to decorate our interior with various decorative elements, bringing some mystery and originality to it.

In this article we will focus on such an important interior detail as a hand-made lampshade. If your favorite lampshade is completely worn out, you can always decorate it, thereby breathing new life into it. You can also make it yourself for a floor lamp, night light, ceiling or floor light source.

Advantages

Two hundred years ago the first lampshades were created. This interesting name came to us from French and translated means "muffled light". As a rule, they were made of leather, wood or fabric, but lampshades made of multi-colored glass and crystal were especially popular and fashionable in those days.

You can also use any materials you like when making this beautiful and elegant decorative element for your lamp.

In order to decorate the lampshade for the lamp yourself, you need to choose it with not too much complex design, so for this purpose the simplest floor lamps and night lamps will suit you. They can be either floor-standing or hanging. After all, interfering with their simple mechanism of a vertical base and a round frame will not be a big problem for you.

Usually it is very easy to select parts for such lamps or replace them with a frame made of wire, wood or metal. The main thing is that the lamp with the lampshade stays very firmly on its structure. At the same time, the floor lamp with lampshade will never be damaged or fall, and you can safely move it to any place convenient for you.

Master classes with descriptions

Making or decorating lamps with lampshades is a creative and interesting activity, and at the same time very fruitful: it gives the opportunity not only to make unique element decor, and in full accordance with the style of the room, but also helps to save cash. You just need to buy the most uncomplicated floor lamp or night light for little money and decorate it to suit every taste. They will help you with this various techniques manufacturing and materials.

At home, you can create lampshades to suit every taste. For this you will need any working night light, lamp or floor lamp, as well as the frame and base for them. The lamp must be LED or energy-saving so that the material from which your lampshade will be made does not deteriorate. When making such a decorative item, you must carefully follow all safety standards, because working with electricity can pose a potential risk of fire or electric shock.

Try not to use materials that are flammable or have a toxic composition when working, so as not to harm yourself and others. You can also make a frame of any shape yourself from wire or purchase a ready-made one in advance.

The most unusual things can be used as items to decorate a lamp, from children's toys to building materials or objects made of plastic and paper.

Made of wood

Wooden lampshades are considered the most durable and moisture-resistant, which will serve you for a long time and at the same time fit into any interior in a classic or modern style. But usually they are of great relevance for a bath or sauna. To make such a lamp from wood with your own hands, you will need a roll of paper, a simple pencil, wood and self-tapping screws.

Using these materials, you can make a corner lamp:

• To do this, draw a trapezoid-shaped frame layout on paper. Please note that the side parts must match the wall on which the lamp will be mounted.
• Next, take the wood and apply the design of the layout onto it and cut it out. Wood can be treated with paint or varnish. Make a frame from three wooden planks one centimeter wide and half a centimeter thick.
• Combine the top and bottom of this frame on the sides and in the center. Measure the distance from the middle to the edges and cut several more planks of the same size. The planks must be fastened with self-tapping screws from the inside.

• You can also make a lamp from vines or dry branches. To decorate a lamp from dry branches with your own hands, you will need twigs of various sizes, a lamp, a base for a lampshade, glue, paints, and brushes.
• Before gluing the branches to the base, sand it with sandpaper, then wipe with alcohol. This way the branches will stick better. Next, take the branches and glue them in different orders to the base in a circle.
• After the lampshade is completely dry, attach it to the lamp.
• To make the lamp look bright and modern, paint the branches with silver or gold acrylic paint. By combining these shades, your lampshade will turn out to be in a Nordic style and will decorate any interior.
• You can also add various decorative elements in the form of pine cones, chestnuts, feathers, artificial leaves, beads or sparkles.

Weaving from vines and branches has never lost its relevance, and if you want to please yourself, as well as create interesting decorative items for your home, then you can do this yourself, only by studying the sequence and rules of working with such a material as vine.

To weave a lampshade or various objects, you can use branches of all varieties and you. This should be done in the spring before the first shoots appear on the branches, so that the product turns out to be of high quality and lasts a long time. Excellent material will be branches of willow, straw and reeds, which are also prepared in advance. As a rule, this happens in the autumn season. And twigs are suitable for a solid base of products walnut and willow.

You can select the rods for the product different sizes and make ribbons out of them for decoration. You can also change the color of the product by holding it in water for some time. This will give it a more sophisticated look.

From paper

The advantage of a material such as paper is its availability and ease of manufacturing products of any shape. Lampshade made from newspaper tubes- This is one of the most popular and creative ways. To weave such a lampshade you will need newspapers or magazines, a bottle, scissors, glue, disk, paint or varnish.

Operating procedure:

• The tubes are prepared in advance by rolling and gluing; they also need to be dried well.
• Next, we cross three tubes, place a bottle on them and weave in a spiral. Thus, the lampshade is expanded by placing tubes on top of each other. Thus, we reach a certain size, glue and cut off unnecessary tubes. After this, you need to paint the lampshade and varnish it.

It will be very easy to make paper lampshade with butterflies. You can also use various fakes using origami technique.

The frame of the lamp is taken as the basis of the lampshade. Next we cut a large number of butterflies according to the template and secure them to the frame with transparent fishing line or white thread. This product will look very original and will fit well into a child’s room.

To decorate a paper lampshade, any decorative elements will do. Let's look at a few useful ideas for decorating such lamps. To add a little extra flair, buy some butterflies from an office supply store or make your own. Next, attach it to your lampshade. This idea for decorating a lighting fixture will appeal to any child or teenager.

An even more original idea is to decorate the lamp with special aromatic bags containing dried herbs and essential oils. This will create a romantic and cozy atmosphere in your room or bedroom.

The pleasant aroma of herbs and flowers will always be present next to you.

If you are fond of collecting herbariums of flowers and leaves and decide to use them to decorate a lampshade, then you definitely can’t go wrong by creating such an unusual decorative element. You just need to glue them onto the finished lamp and let the glue dry. So you can do it rustic lampshade, which will decorate any interior in the country or in the house.

Wallpaper lampshade would be a great idea. Its creation does not require much expense or effort. Let's consider the most interesting option, made in the form of an accordion. To do this you will need a lamp frame and wallpaper. On the section of wallpaper you need, draw stripes, the distance between which will be at least two centimeters. Then fold the wallpaper into an accordion shape and make holes on the top of the piece. Then you need to thread a lace through them to secure and glue the structure.

Another idea for creating a lampshade is from a napkin. To do this you need to have glue, openwork knitted napkins and a balloon. Next, take napkins and coat them with glue, place them on the balloon and wait for them to dry completely. The ball can be pierced or lowered, and a light bulb can be attached to the resulting lampshade.

Napkins can also be paper. Cut them into equal parts, coat the lamp with glue and glue it to its surface. You can attach a ribbon or braid to the bottom or top of the lamp, which will give it a more vintage look.

From scrap materials

To make a lampshade from scrap materials, you should first decide what materials it will be made from, and you also need to have a frame for the lamp. This base can be a balloon or ball.

Another material option for creating a lampshade frame is a regular five-liter plastic bottle. To do this you will need to trim top part bottle and paint it on the inside with any light paint, and on the outside with blue or green. To make the edges of the bottle look neater, stick tape on them that matches the color of your lampshade.

You can do it with your own hands lampshade made from plastic cups. To do this you will need a stapler, wire, a wooden base and a lamp socket. Next, the glasses are fastened in a circle to each other, and a socket with a lamp and a structure of cups are attached to a wooden base.

Such an original and practical lampshade will serve as a worthy addition to your interior.

Any available material can be used to design a lampshade. Cocktail straws are no exception. To do this, you need to prepare about two hundred straws, which we glue onto the glass base of the lamp using construction glue. And from finely chopped multi-colored tubes you can make a small night light in the shape of a cube.

The easiest decoration solution is to glue cocktail tubes vertically to make the old lamp even brighter and more beautiful.

Will not amount to a lot of work manufacture lampshade made of simple galvanized wire and beads. To do this, you will need wire cutters and pliers to give the wire different shapes. These can be curls, leaves, hearts, circles and patterns. Such simple design will look very original. You can also make a wire base and stretch fabric or leather over it.

Cardboard lampshade with your own hands is very easy to make and will be distinguished by its unusual appearance, while finding a place in any room. To do this, you will need to cut out four frames from durable cardboard and attach them to them with reverse side using lacing fabric. For this, not only ordinary threads can be used, but also various ribbons or braid.

Thus, you will get a flashlight, which additionally needs to be glued with glue. After that, you can paint this unusual lampshade in any color and install it on the lamp.

Cork or self-adhesive paper can also work great when making a lampshade. First, apply paint to the old lamp silver color, then cover it with cork paper. Glue branches of different sizes on top of them. And if you have felt left over, you can sew a new lampshade from it. To begin, make a pattern for the base of the lamp, sew its parts and pull them onto the base. Decorate with various applications.

From threads

The most environmentally friendly option for your home would be a lampshade made from twine or twine with your own hands. To work you will need threads of two different colors or varieties, a needle, a balloon, glue and a cup. In order for the thread to be saturated with glue, it must be threaded through a glass of glue or a jar of glue must be pierced. This can be done using a needle.

Next, take the ball and draw a circle on it for the hole for the light bulb, while wrapping the ball so as not to touch this circle. After this, we leave the ball for a while so that the glue dries well and the structure does not deform when the air is released from the ball. Next, insert a socket from an old lamp into the hole and attach the resulting product to the ceiling.

Another unusual way decorating a lampshade is crochet it. To do this you will need a base for the lampshade, yarn, a crochet hook, and glue. According to the knitting pattern, knit two openwork products required size and go all the way around the lampshade frame. Patterns can be varied.

To give the product an even look, apply a mixture of water and glue, diluted in equal proportions. During drying, you can give the lampshade any shape. Next, install it on a floor lamp or lamp.

And in order to make a wicker lampshade with your own hands, purchase a frame from an old retro-style lamp. This element will make your interior unusual and emphasize its advantages. To make it you will need threads, glue and a spray bottle. Wrap the base of the lampshade using random and simple movements.

Make sure the threads are wrapped tightly. After this, dilute the glue with water and spray it on the threads from a spray bottle so that after drying they hold a certain shape.

Manufacturing jute lampshade will become great ideas for those who want to decorate their home. To do this you will need jute thread, glue, wire, and decorative leaves. First you need to make a lampshade template that will match the lamp frame. We attach screws or nails to the finished template. Then we stretch the thread along the contour of the layout and drag it vertically along the entire contour. Next, we weave horizontally and treat it with glue.

Immediately after drying, remove the product from the layout and glue the side parts. In order to decorate the lampshade, we take decorative ivy leaves and attach them with wire to the base of the lamp. This lamp will create a fabulous atmosphere in your home.

From fabric

First you need to choose the fabric for the lampshade. It can be fabric of any density and stiffness. The choice of material will depend on what the lamp frame is made of, but preference should be given to dark fabrics rather than transparent ones, as this will be more practical.

To ensure that the color of the emitted light is cool, use fabric in blue or green shades, and for cool light, choose yellow or red shades.

If the base for the lampshade is made of wire, it must be painted or wrapped with tape to prevent the fabric from deteriorating over time. The product can be sewn by hand or using a sewing machine. You will also need an iron, pencil, tape measure, thread and glue.

First you need to take measurements and cut out a template that will fit the lampshade frame. Next, cut out the pattern according to the template and match the threads to the fabric. We sew the parts using a sewing machine and then smooth them with an iron. The next step is to glue the product to the base of the lamp. In this case, you need to carefully hide the seams, tightly fitting the frame. Just dry the finished lampshade and put it on your lamp.

It can fit very interestingly into the interior lampshade made of burlap. This fabric transmits light well. Her main feature is that it can be decorated with some decorative details, buttons, beads, artificial flowers or openwork lace. You can also write on the burlap with special paint.

Another idea for making a lampshade will appeal to many. It will be made in the form flared lampshade in a cylindrical shape. You can match it with any fabric to match the color of your furniture or sofas and armchairs. You don't have to worry about the density of the fabric, because it can be made more durable with glue or starch.

Measure the diameter of the base of the lampshade frame from the bottom and top, as well as its height. Next, make a pattern on the fabric with a margin of a couple of centimeters according to the measurements that you took from the lamp frame.

Any decorative element can decorate such a lampshade, for example, simple bows and ribbons will do.

Thin fabric in dark colors can also be stretched over the frame of the lamp. But its peculiarity will be that on the inside there will be cardboard in which you can cut out various shapes. These can be various butterflies, animals, plants. The main thing is that the cut out silhouettes can be easily distinguished when the light is on, which will come from your lamp. Thus, we will get an original lamp and a peculiar play of shadows.

Decor ideas

If the lampshade looks very boring and inconspicuous, it can be decorated in an original way. Next, we’ll look at interesting solutions that can help transform your lamp. To do this, you will need thick fabric or multi-colored scraps. For example, if you decide to decorate your lamp in Provence style, then you will need fabric in a blue, light green, or pink shade, since this style is characterized by pastel colors, a checkered or floral pattern.

To start making a lampshade, match it with suitable fabric and cut out two strips. From one, make a bow for the top of the base of the lamp, and sew lace or braid to the other strip. The fabric can be decorated with various beads, buttons or covered with sequins. Don't forget to trim the edges of the fabric and attach or sew a second strip around the base of the light. Attach a bow to the top of the lamp in the same way.

You can also use fringe or knitted napkins in decoration, as this will give your lampshade more sophistication and luxury.

One more interesting idea is to decorate the lamp with flowers and leaves made of fabric in pastel shades. You can make roses from ribbons or ordinary chiffon fabric and decorate the entire lampshade with them. This lamp will find its place in any room, especially in the bedroom or nursery.

A good idea for decorating a glass lampshade would be to stick a photograph or picture on it, which will glow even in a dark room. You can also apply stained glass paints to the glass or paint it. And from unnecessary scraps of scraps you can make an interesting applique of floral motifs and sew it on your lampshade.

In those minutes or hours when the forces of nature are raging outside the window, be it rain or heavy snowfall, you want warm, soulful and cozy atmosphere. As an option, immerse yourself in reading your favorite book, have a tea party with a pleasant interlocutor. You can also do some crafts, for example, building a frame for a lampshade with your own hands.

For those people who have developed creative fantasy, this lesson You will like it, because this is a way to show all your abilities. In addition, decorating your own home will only bring benefits, giving it a bit of charm and sophistication.

A number of advantages of working independently

When you make any crafts with your own hands, this implies the presence of certain advantages over finished products. Moreover, you can make any lampshade for a specific lamp with your own hands.

So, these advantages should be taken into account if there is a need to choose between purchasing a ready-made solution or making a hanging frame for a lampshade with your own hands. And there are many of them:

1. First of all, this is an opportunity to end up with an exclusive lampshade.
2. The master has at his disposal a much wider range of decorative designs than store-bought products can offer.
3. In some cases, cost savings cannot be ruled out, and significant ones at that.
4. Involving children in the process will develop their skills and creativity, which will benefit everyone.
5. By putting a piece of your soul into your work, you can make original gift close people. Elderly relatives will especially appreciate this - it will be a pleasant reminder of their grandchildren and children.
6. Don't discount it either psychological aspect- after all, this is an opportunity to put your plans into practice, and then be proud of the result.
7. Suitable for work are things that have been accumulated over the years, but have never found further use.

The listed arguments are quite convincing, and therefore we can now move on to analyzing the theoretical part, how to make a frame table lampshade with your own hands.

Homemade frame

Without a doubt, the interior of any room should be filled with a special atmosphere where you can feel comfort and harmony home environment. In this regard, every detail deserves attention, even seemingly trifles at first glance! But lighting fixtures are a completely separate matter, and in some cases they occupy a central place in the overall picture of the interior.

And as we know, it is not always possible to get what you want at a reasonable price. Therefore, we are increasingly inclined to the need to manufacture such products ourselves. This is especially true in cases where only the bases of old chandeliers, floor lamps, and table lamps remain. It would be a sin not to take advantage of this opportunity! Just a few more words worth mentioning about the types of lampshades:

• frame structure;
• frameless products.

Moreover, each of them has its own characteristics. But if you imagine everything in a general way, they also have similarities.

Frame for lampshade

Let's start by looking at frame lampshades. They have a rigid base on which the selected material is fixed. The frame can be the most different shapes and in many ways it all depends on the personal preferences and imagination of the manufacturer. And, of course, the availability of the necessary material is taken into account.

In addition, this design has a significant advantage - the distance between the lamp and the finishing material of the lampshade is immediately determined. It is maintained throughout the entire period of operation of the chandelier, lamp or table lamp.

In addition, the product turns out to be quite rigid (this quality is formed initially), which is already the main advantage of frame lampshades.

Frameless options

In fact, this can also be considered frame products, but with a noticeable difference. Here, the finishing material of the lampshade itself acts as a “solid” base. To give the required shape, a temporary frame is initially made and attached to it. exterior decoration. Typically using glue. And after the composition dries well, the base is removed.

When choosing to make such a “frame” for a lampshade for a table lamp, it becomes necessary to calculate in advance at what distance the device will be located. Its distinctive advantage is the low weight of the product compared to frame option. However, there is a drawback - accidental deformation of the shape can lead to the material being dangerously close to the lamp. And this is already fraught with various consequences - from melting to fire.

This especially applies to manufactured lampshades for table floor lamp or lamps. They can be damaged during accidental mechanical impact.

What to choose as a material

Since the topic of the article concerns the production of lampshades with a base, we will not consider other options. Then the question arises, how to make a frame for a lampshade with your own hands? More precisely, what materials can be used to make a good and durable structure?

Here you should take into account the condition of the old lamp - if you only need to update the lampshade, and the frame itself remains intact, then you can get by with choosing a new finishing material. But at the same time, it may also be that it has already lost its functionality and has become unsuitable for further use. It is possible that the lamp does not have a frame at all, but there is a desire to make one.

You can visit a flea market and choose some old version lampshade, which can then be updated at home. And if this option doesn’t suit you, then it’s worth rummaging through your own warehouse, where you’ll most likely find suitable materials.

Garbage candy

This is one of those options for how to make a frame for a lampshade with your own hands, when you don’t need to make any effort. special efforts to form a frame - in fact, it has already been created. Why not the base of a metal trash bin? It's hardly worth it big money. In many hardware stores you can also find plastic options, but for our purposes we need metal options (for obvious reasons).

If the shape and dimensions of the basket suit you, then the frame is almost ready. All that remains is to carefully cut a hole in the center of the bottom and securely fasten the lamp socket. In most cases, the bottom of the basket is a solid metal sheet, which is already convenient.

Now you can begin further design of the lampshade. In some cases, it is enough to paint the mesh surface in the desired shade, and then decorate the upper and lower parts with some material.

Using wire

The most common material for making a frame is wire. The lampshade frame can be made using spot welding. However, here you need to have the appropriate skills and equipment, which not everyone has.

Therefore, it remains to fasten the elements by twisting. And since a rather thick material is generally used (due to its considerable rigidity and elasticity), they are fastened together with thin wire. An alternative is aluminum, but it is too plastic and easily deformed.

In addition to the material itself, you need to prepare a number of tools:

1. Pliers - they will be used to bend and straighten the wire.
2. Tongs with round jaws - convenient for twisting.
3. Wire cutters - useful for cutting material.
4. Hammer - you can also use it to straighten individual sections.
5. Sandpaper- for cleaning frame elements before painting them.
6. Thin wire - for twisting lampshade elements (connecting wire, 1 mm in diameter will be enough).
7. Glue "Moment" - for a more reliable connection of elements.

Sometimes, in solving the problem of how to make a frame for a lampshade, you may need electrical tape for additional fixation of the elements, or a hacksaw for metal. Now the actual process of creating a wire frame, which can be represented in the form of several functional steps.

First step - diagram

After preparing the tools, you can get down to business. First, draw a lampshade on paper, how it should look in accordance with your personal tastes. It is also worth thinking carefully about its shape. In this case, the dimensions of the structure must be indicated in the diagram.

If fabric is chosen as the finishing material, then you cannot do without a full-fledged frame. It will maintain the shape of the product. However, when using paper, you can get by with basic rings.

Second step - preparation

For a wire lampshade frame with your own hands, you can choose aluminum material with a diameter of 4 mm. The required length is calculated by the formula: L=π*D, where π is 3.14 (the well-known number pi), D is the diameter of the lampshade circumference (shown earlier in the diagram). You just need to add another 100 mm for the connection. Now all that remains is to cut out the required length with a hacksaw.

Third step - foundation

At this stage, the lower ring of the frame is made, and the connection should be made in an overlap (5 cm). Another wire (connecting) is wound at this point. The connection itself should be impregnated with glue - this will strengthen the product. The top ring is made in a similar way.

Fourth step - ribs

It is worth tackling the side ribs, for which the same wire (4 mm in diameter) will do. The height of the do-it-yourself lampshade frame for a floor lamp or table lamp is selected when creating the diagram, and now segments of the required length are measured, only you should also make a reserve of 120 mm for bends. The number of ribs can vary to varying degrees depending on the specific situation: 8, 12, 16 or more.

Afterwards, you can proceed to securing the segment to the upper and lower rings. To do this, each workpiece is bent with pliers, having previously measured 60 mm on each side. They are then held together with a thin connecting wire, just like when creating rings. All joints should also be thoroughly blotted with glue.

Fifth step - lamp socket

A special suspension should be prepared for the cartridge. To do this, you need to bend a loop of wire so that it squeezes the cartridge well, and the ends will extend from it in opposite directions. With their help, the suspension will be fixed to the upper ring, as well as the side ribs.

Actually, that's all - the frame for the lampshade is made with your own hands and now all that remains is to decorate it beautifully. Just remember that when using fabric, you should not screw in lamps with a power of more than 100 W.

Wire clothes hangers

If for some reason there is no material to make the frame, wire clothes hangers may come in handy. They need to be untwisted into even sections and straightened with pliers. After this, you can proceed to preparing parts for the lampshade frame.

The elements are connected in the same way as in the step-by-step instructions above. You can also fix it with glue or electrical tape. At the same time, the manufacturing process itself is cast with ease - it will require much less effort. At the same time, you need to understand that the frame in this case will not be as rigid and durable as it should be.

Reinforcing mesh for plastering walls

This material can be found in any hardware store, and the nets can have cells of different sizes depending on the conditions of use. For the lampshade frame with your own hands, you should choose a surface with cell sizes of 15x15 or 20x20 mm. To select the dimensions of the fragment, again, you should first draw up a diagram of the lampshade, where you should carefully indicate all the dimensions. After which the segment is simply rolled into a pipe, and the edges are connected with twisted wire, overlapping one or two cells.

Only in this case will the frame be in the form of a cylinder or a truncated cone. Therefore, if such a form does not contradict the style of the room and is completely satisfied with its appearance, then this best option. Otherwise, you'll have to find something else.

Fan grille

Many of us have once used a fan that has already become unusable. However, such a device has a useful element - a grid. It is usually present in all floor-mounted fans. So why not give it a second life?

In addition, a certain shape already exists - a kind of spherical segment. However, if desired, the frame can be deepened by securing an additional tier of the same wire at the bottom. Or, as another option, lining it with some material. Both will be quite appropriate.

Conclusion

It is not at all necessary to buy an expensive chandelier to decorate a room, bedroom, kitchen, living room and any other room. And if you consider how much they cost, it immediately becomes clear that it is easier to make a frame for a lampshade with your own hands. In addition homemade product can fit into the interior and add a bit of zest.

Besides, here again clean water psychology - looking at a frame made with your own efforts, especially with the support of friends and relatives, is many times more pleasant. You can immediately feel the room special atmosphere home comfort. Of course, if you approach the matter with soul and love.