Do-it-yourself spinner - step-by-step instructions with examples of how to make it at home (150 photos of new products). DIY: Do-it-yourself spinner and what is a spinner Homemade spinner drawing

home

Scud

The spinner is rapidly conquering the world. Millions of people from all over the world spin and toss this toy at work, in traffic jams, at home, while walking, in line, etc. A spinner is a powerful and at the same time very simple and affordable anti-stress that helps you get rid of tension and relax without attracting attention to yourself. The spinner became so popular that people began to perform various tricks with it. This toy is loved by everyone, young and old: it is played by both preschoolers and big bosses in modern offices.

A spinner is an affordable thing. If at first they could only be found online, today they are sold on literally every corner, and there are quite a few budget options. However, homemade spinners are not inferior in popularity ready-made options: Internet users are actively looking for how to make a spinner with their own hands at home. And this is easy to explain: homemade spinners are unique, made from scrap materials, and their production is also a kind of anti-stress.

We offer you several options for making this accessory. The first one is the most labor-intensive, the rest are a little simpler. Choose the one that you find most understandable and like the most.

Option one: difficult, but interesting

We will really only use available means. We will need:

wooden ice cream sticks (20 pieces);
a bearing made of metal or ceramic (if you want the spinner to spin easier and longer, choose the latter) size 8*22*7;
50-kopeck coins (make a hole in the center with an awl) (12 pieces);
nuts and bolts small in size and diameter (4 pieces each);
buttons from jeans or denim jackets (or the simplest pushpins) (2 pieces);
glue;
sandpaper;
paint (it’s more convenient to take aerosol paint).

How to make a spinner?

Step 1: Preparation

We take two wooden sticks and cut each into two equal parts (lengthwise). That is, at the output of two sticks we already have four.

Now we take five whole sticks, press them tightly together and apply a layer of glue on top. We place the second layer of sticks on top: we place four whole ones in the center, and put the previously cut sticks along the edges. Cover them with a layer of glue. The third layer will consist of five whole sticks (like the first). The fourth and final layer is a repetition of the second.

The output is a base consisting of four layers of sticks glued together.

Step 2: Basic work

Choose the size of the spinner for yourself. We will tell you using the example of a 9*9 square, but the proportions can be freely changed.

Make marks on the workpiece and cut out a square (let's say 9 cm).

Now we draw an equilateral triangle inside the square. To do this, divide one of the sides of our square in half and draw two 9 cm segments from this point, and then connect the ends.

Then divide each side of the triangle exactly in half and make serifs. Connect each notch to the opposite vertex. The intersection point of these segments (they are called medians) is the center of the spinner, where we will place the bearing. Trace its outline with a pencil.

On the same segments, make notches at a distance of 2.5 cm from each vertex. Place a coin in the center of each of them (the hole is needed to align the hole with the notch and not get lost) and circle it with a pencil.

Using an awl or sharp knife, poke holes inside the outlined outlines. And then loosen them to cut even holes. You can press the bearing and coin into the workpiece (but carefully so that the glued layers do not separate).

Cut out a triangle from the blank. Now we make two-centimeter notches in the center of each side. Like this:

The height of the notch at the median is 7 mm. Cut out these side triangles.

Step 3: Spruce up the polish

We take sandpaper and sand the surface of the future spinner. We walk around the edges. Paint the workpiece on both sides and leave to dry.

Step 4: Weights

Glue four coins together. We will end up with 3 stacks that we will insert into our holes in the spinner. Place the bearing in the center.

To make it easier to rotate, we place previously prepared buttons or buttons in the center of the bearing and glue them. Ready product can be varnished.

Tip: if you own a jigsaw and drill, take note of the diagrams from our instructions and make the spinner body not from ice cream sticks, but from ordinary wood panel. Then simply sand your workpiece with sandpaper, paint and varnish.

Ready!

Option two: the simplest

Using superglue, a glue gun or cold welding we connect three or more bearings together. A video master class on making a spinner at home is below.

Option three: energy-intensive

The most reliable way to connect bearings is not just with glue, but also with a housing. For this, ordinary ties are suitable, as well as wooden (as in the first method), plastic and metal cases. To learn how to make them, see the next master class.

Option four: for cyclists

If you have an old bicycle chain, this DIY spinner recipe is for you. True, you will have to work hard to make this popular toy. We lay the chain in a special way, fasten it with a tie, fix it, and place a bearing in the center. Watch the video for detailed information step-by-step instruction.

Option five: if you don’t have cutting tools, but still want to make a spinner

A spinner made of paper or cardboard is also an excellent option for this toy. It will spin just as well! Take cardboard and a compass, cut out 4 circles from it equal diameter(decide the size of the spinner for yourself, it doesn’t matter), glue them together. Take bright cardboard or paper to make the toy more attractive and delight you not only with its properties, but also with its appearance.

Make the holes for the bearings slightly smaller than the diameter of the bearings themselves. This is necessary so that they fit tightly and do not slip out when you spin your toy. Learn more about making such a spinner in this video.

Option six: if there are no bearings, but you still really need a spinner

If you don't have bearings, a spinner can be made from simple material, which is as easy as pie to get - from plastic caps. We will need six pieces (take colored ones to make the toy look more beautiful and interesting) and a toothpick or pen refill.

Let's see how to make a bearing from plastic caps.

Bonus

The video instructions below talk about three of the most simple ways making a spinner at home. They all repeat the three in one way or another latest instructions(No. 4, 5 and 6), however in this video you will also find several important tips on making a popular anti-stress toy.

Choose the method that seems most interesting and understandable to you. It is quite possible to make a spinner with your own hands in 2-3 minutes, or you can get confused and make a toy in a more labor-intensive way. The result will directly depend on your efforts. However, no matter which method you choose, at the end you will definitely get a cool anti-stress toy, which is so popular today.

spinner- a newfangled simulator for developing fingers, relieving stress with a bearing in the center. To put it into working condition, you need to grab it by the inner part and unwind the outer one. The spinner will spin around its axis for some time.

The spinner is fun for everyone: for respectable men in expensive suits, and for restless children, the structure does not contain small parts, and the toy itself has no sharp corners.

The device has a beautiful aesthetic appearance and comes in a variety of colors. Its compactness allows you to take it with you everywhere.

The spinner is purchased for personal use, as unusual gift for all age categories of people of different status: the item will bring joy and pleasure to everyone.

According to experts, the subject helps people with autism and attention deficit disorder concentrate. It helps to calm down hyperactive children who don’t know what to do with themselves. Some people find comfort in the sound of the device vibrating.

In the article you will learn details about the little thing, the history of its creation, and operating instructions. Also learn how to make a spinner with your own hands.

Kinds

There are spinners various forms, sizes, prices vary from a dollar to hundreds of dollars. The toy is made from different materials: metal, wood, plastic. When using a combined material.

Spinners come with three or two petals, smooth and rough.

Plastic ones are larger in size and lighter in weight compared to metal ones.

The ceramic bearing promotes long-term rotation of the object.

History of origin

The fidget spinner was invented by American chemical engineer Katherine Hettinger. According to her, the idea of creating anti-stress came to her in Israel. Watching the picture of children throwing stones at the police, she wanted to make a toy that would occupy the thoughts and hands of the boys, freeing their minds from pranks.

According to other sources, the scientist invented an activity for her daughter, with whom she could not spend much time due to illness.

In the 90s, a woman offered her invention to manufacturers, but no one took the patent. Currently, the device is not similar to the previously invented one.

In 2014, businessman Scott McCoskery created a similar product to relieve stress. It represented an iron rotating device. All his friends liked the invention, and in 2016 McCoskery filed a patent for himself.

On Russian market The product appeared in 2016.

What is a spinner for?

The purpose of the spinner is to train hands and develop children's motor skills. The device relieves stress, helps cope with anxiety, concentrate, and calms.

Often the simulator is used to train fingers and hands after injuries.

A worthy advantage of the finger spinner is that it helps quit smoking. Monotonous spinning movements calm you down and distract you from thoughts about bad habits.

How the device works

The gadget does not require batteries or accumulators to operate. There is a bearing in the central part. All you have to do is snap your fingers and the unit will work. You need to hold the middle with your thumb and middle finger. You need to operate the machine with your index finger.

How to spin a spinner video

The bearings differ in quality. The higher the rating, the longer the spin takes. For a rotating element, a central bearing is sufficient, the rest will serve decorative element and weights to improve balance.

How long does it take to spin?

How long does the spinner last? Rotation time is an important quality and one of the main indicators of a good machine. Connoisseurs of quality toys use only expensive bearings, calculated balance and the right materials for long-term rotation of the spinner.

This may not seem like a big deal, but believe me, once you spin your first spinner, you will be surprised at how quickly you will want the spinner to spin faster and longer.

The price of a spinner starts from a dollar. Inexpensive trinkets spin for a couple of minutes. The duration of rotation of serious units (using steel, copper, brass) reaches tens of minutes.

The greater the weight of the product, the faster the bearing works and the device rotates, the louder the sound and vibration. Ceramic and composite bearings vibrate less.

How long does it last

There is no clear answer to the question of how long a spinner lasts. The criteria for long service depend on the materials used, careful operation, lack of mechanical damage. Metal bearings will extend the life of the device for many years.

Those who are skeptical about these toys simply have not tried to twirl them. Once you find “your” device, you won’t want to part with it, the activity is addictive.

DIY spinner at home

Making a device with your own hands is not so difficult, follow our tips, watch the video, add skill and soon you will be rotating the product.

Made of paper without bearing

A do-it-yourself spinner without a bearing can be made from paper and scrap materials.

Master class of the Plastilin channel.

How to make a spinner out of paper? First, draw a drawing: take a round object with a suitable diameter (in the example, a bottle cap), draw a sketch as in the photo.

Then you need to smooth the corners between the circles.

Cut out the shape along the borders.

Attach it to the cardboard, trace and cut out a second identical part.

You need to cut 4 circles with a smaller diameter.

The coins will serve as a weighting agent. Paste into three parts according to severity,

Glue the other half on top using glue.

Make a hole in the center with nail scissors.

This is what the blanks should look like.

Decorate your toy, paint it in your favorite colors.

Cut a piece from the juice straw and insert it into one of the circles.

Secure with glue and let dry.

Let's assemble our unit.

A circle without a hole is glued on top.

Your DIY paper spinner is ready.

How to make a spinner from scrap materials video

DIY spinner made of wood

If you have golden hands and they know how to operate a jigsaw or drill, you can easily make a product out of wood. It will turn out smooth, good quality, and will be pleasant to hold in your hands. Below is a master class from the ZarkReed channel.

Spinner bearing

Which bearing to get for a spinner? Answer: any. Remove from a broken skateboard or scooter. If a fan or computer cooler breaks down, get it out of there. If there is nothing to take apart, order online or purchase in a store.

Stages

For beginners, it is better to start with a thin wood material, such as DPS. Manufacturing procedure:

Draw a drawing.

Cut out a sketch from paper and attach it to wooden surface, circle.

Cut out and sand the parts with sandpaper.

Enlighten the hole in the middle - it will turn out neater.

An important point: the thickness and diameter of the hole in the tree and the bearing must match.

The coins are glued with glue.

The base is painted over with acrylic paints.

The central part and coins are threaded and glued.

The spinner toy is ready.

DIY wooden spinner video

DIY glowing spinner

Spinner can also be made glowing using LED strip and battery. Stock up on the necessary ingredients, watch the video and make your own beauty.

If you make this thing as a gift and give dear person, he will appreciate it! This is a very popular and fashionable destination, you will need to look for those who are indifferent.

Text prepared by: Veronica

The spinner is a fashion toy invented in the USA. It appeared in Russia in 2016 and has already gained extraordinary popularity. What is it? She is called a spinner, a spinner, a fidget.

It develops fine motor skills of the fingers, relieves anxiety and has an anti-stress effect. Fidget spinner is not only a toy designed to entertain children and adults. This is a great way to spend time waiting, traveling in public transport, and queuing. This turntable also allows you to get rid of bad habits, such as tapping your fingers on the table surface, repeating hand movements, and even the habit of smoking. Will allow you to get rid of bad habit twist something in your hands. The working principle of the fidget spinner is the use of a bearing in the middle of the product with petals.

The fitget has two, three, four, five, and some models even six petals. The most common are toys.
The spinner is made of wood, brass, bronze, plastic, and can be combined.

Two types of bearings are used: metal, like, or with ceramic balls. Characterized by rotation time. The spinner rotates from one minute to several tens of minutes. The longer the rotation occurs, the better the quality of the toy.
The cost of the product is affected by use quality materials in the manufacture of a body with petals. The easiest way to buy a spinner is in.

Making wood in a home workshop

However, a person familiar with tools can make such a toy for himself. For this you will need:

A small piece of wood, preferably hardwood;
Bearing (suitable for a broken skateboard);
Sleeves or suitable pieces of round metal;
Epoxy adhesive.

Video with instructions for making a spinner from wood

First of all, we mark out a piece of wood. A square piece is required.
We drill a hole in the center and expand it under external dimensions bearing. The thickness of the workpiece must be equal to the thickness of the bearing. The next step is to insert the bearing and glue it with glue.
From two opposite sides we drill two holes equal smaller diameter sleeves Then we take the polished sleeves, glue them in pairs and mount them with glue in the prepared holes of the board. Let the glue dry.
We clean, sand and paint in the color you like. A simple spinner with two petals is made at home. In the same way, you can make a homemade gadget from plexiglass or PCB.
It is more difficult to make a product with three petals. To do this you will need a drawing, a jigsaw and a protractor. The diagram below clearly illustrates how to make such a toy.

Paper spinner

Much easier to make hand spinner from paper.
We print the drawing on a regular printer.
Transfer the drawing to thick paper or cardboard.
We cut out 15-20 samples according to the template. Using scissors, we make a hole for the bearing, slightly smaller than the outer diameter.
Glue the cut out samples with PVA glue.
Place under the press.
After the glue has dried, insert the bearing.
We clean it with scissors and, if necessary, sandpaper.
Paint it in the desired color. The toy is ready.

Video with instructions for making a paper spinner without a bearing at home

As you can see, the cost of the product consists mainly of our own work, because Parts from out-of-circulation mechanisms were used for production.
Before assembling the gadget, inspect the bearing. To do this, remove the anthers and wash them. This completes the work on making the turntable.

Luminous

The most interesting toys are obtained if you make them yourself from absolutely incredible materials. Make a glowing fitjet - all you need to do is buy a phosphor online in China.
Dilute 3 grams of powder in 7 ml of glycerin to obtain a luminous liquid.
Then you can use the described method for making the central part from wood. Just use glass bulbs from fluorescent lamp starters instead of sleeves.
We pump liquid into the flasks using a syringe and glue them into the prepared holes.

It turns out beautiful toy, which you can play and surprise your friends in the dark.

Made from chocolate

Any material you can imagine is suitable for making a spinner. It can be made from wax, paraffin candles, ice and even make it edible.
A very original gadget is made from chocolate.

I played and got tired of it and ate it.

To make such a toy you will need:

Make a mold for filling;
Bearing;
Candies such as confetti or jelly beans;
Cardboard, for form and glue;
Wax paper;
Scissors with pencil;
A piece of foil from a chocolate bar and the chocolate itself;
Glue.

Video showing how to make an edible chocolate spinner

A drawing is taken from which the twist template is cut out. A strip slightly larger than the thickness of the bearing is cut out of paper and glued along the perimeter of the template.
Then we completely wrap the prepared bearing in foil and place it in the center of our mold, having previously placed wax paper on the bottom of the mold. We place candies along the edges of the petals (you can do without candies, this is for beauty). All that remains is to dissolve the chocolate in a water bath.
As soon as the chocolate becomes liquid, it is poured into the mold using a pastry syringe. It is necessary to pour very carefully so as not to move the installed parts.
After filling everything with chocolate, place the toy in the refrigerator. After some time, the chocolate will harden and can be removed from the refrigerator.
All that remains is to remove the product from the mold, free the bearing from the foil, clean the edges - and you can use it. When you get tired of it, you just have to eat it.
The entire manufacturing process can be filmed and shown to friends or posted on the Internet on your page.
In a similar way, a fitjet can be made at home from any hardening material: stearin, wax, gelatin, and from colored wax candles you can get a multi-colored spinner body.

They differ in the number and shape of the petals. The shape can be completely different: from geometric shapes to exotic and futuristic shapes. They differ in the use of bearings: one, three, four or no bearing at all. When choosing a spinner, follow these rules:

The gadget should rotate smoothly and without noticeable beats.
The quality of workmanship should not cause any complaints.
The material from which the toy is made must be of high quality.
The rotation is quite long: the longer the better.

Some users advise choosing products based on their preferences. If you like the item in terms of design, color, or manufacturing, buy it, but the rotation time is secondary.
So we see that no one can give an unambiguous recommendation. Focus on your own feelings. To ensure that the pinwheel serves for a long time and is always attractive, follow the recommendations:
Protect the toy from mechanical damage, falling from a height or hard surface;
If the product is made of plastic, it is not recommended to disassemble it, especially the button - it can be damaged plastic parts, they are glued or pressed very tightly;
Periodically wash and lubricate the middle bearing using a syringe with a needle. Wash with gasoline, preferably for lighters, it has almost no odor. It is recommended to lubricate with watch oil in a small amount. Mineral oils should not be used for lubrication.

Despite the fact that the peak of popularity of the anti-stress toy that was fashionable in 2016-2017 has begun to subside, many are still looking for ways to create an original little thing that will help them spend time not boring on long trips, long queues or difficult situations. life situations. Naturally, we're talking about about a do-it-yourself spinner. How to create it at home, and what you need for this - read more in our material.

What are spinners for and how do they work?

Each twist dismantles the individuality of its owner.

Fidget spinner is a rotating flat or three-dimensional toy that is popular with adults and children throughout to the globe. Its main purpose is to occupy and distract . Some people think that spinner is useful , because thanks to him you can take a break from everyday life and psychological problems, relieve irritability, get rid of anxiety. Others claim that thanks to the turntable you can focus on the right things , distracting from everything unnecessary. Be that as it may, the fame of the toy does not need explanation, because literally everyone loves it.

There are many forms of the so-called hand twister. It will depend not only on the invented design, but also on the components available in stock. To understand the specifics of the work when creating a spinner with your own hands, you need to know just a few important points.

Mandatory traditional elements of a spinner are:

bearing;
wings.

The most important part of the spinner is the bearing. It will depend on him how long and quickly the toy will spin, as well as its sound and vibrations. In many homemade toys bearings are often replaced with primitive toothpick designs , which also allow the toy's wings to spin.

Popular articles:

Wings, or petals, can be from two to six , but often you can find two or three petals. It is these elements of the spinner that give room for imagination, allow you to embody bold ideas and show individuality.

An unusual design of one of the most primitive forms of a toy - round.

The so-called twisters made from plastic, metal, wood, cardboard and many other materials. Often materials are combined. IN Lately plastic or metal toys with glowing wings.

Products made of plastic, wood and copper.

The design of many hand-made spinners is amazing. Many people decorate their toys with interesting engravings, illustrations, and icons. . The model of a small spinner that fits in the palm of your hand allows you to characterize its owner without further ado.

Spinner in the shape of a Snitch.

Fairy-tale illustrations and details look very interesting on spinners.

Men's design turntables.

Lately, glow-in-the-dark toys have become very popular.

Fidget spinners in women's design.

Today, a spinner can be bought in almost any store. There are budget models, and there are expensive original or even designer ones. But to stand out from the crowd, you need to make a certain effort, for example, make an original thing with your own hands for yourself or your child, relative, friend (for example, as a gift). If a child asks for such a fashionable product as a spinner, so much the better, because he can be involved in the creative process, starting with choosing a model and ending with creating a memorable toy.

General instructions before starting work

Before you start working on your spinner, you need to have an idea of what exactly a person wants to get as a result. To ensure that the result does not disappoint, you need to work according to a simple scheme.

Stage No. 1 - selecting a model and design

Because possible models There are countless spinners, and we are all different, and we like different things, then first you can choose suitable model from the simple ones. This is necessary so that the process does not turn into punishment. Or you can go the other way and choose the most original model from a special material of an unusual shape. This option is suitable for those who have already tried to create things with their own hands.

Options for creating a hand spinner with your own hands.

Stage No. 2 - draw and draw

For everything to work out, you should take care of the drawing on a scale of 1:1. You can draw the future spinner model on paper, or you can search for ready-made drawings on the vast expanses of the Internet.

Drawings and blanks.

Stage No. 3 - prepare tools

Now that the creator has decided on the design and the schematic image is ready, you can begin to prepare all the necessary materials.

The first step is to purchase (or withdraw from old technology) bearing. It can be made of metal or ceramic. The most acceptable option is a diameter of 2 mm. To ensure a pleasant pastime in the future, professionals advise clean the part from grease in a "bath" of gasoline before it ends up in the toy. Why clean the bearing from grease? It makes the rotation slower, and also gets your hands, clothes and furniture dirty.

In addition to the spinner assembly parts, you will also need the following tools:

Construction marker (pen, pencil, regular felt-tip pen);
Scissors;
Stationery knife;
Elements decorative finishing(optional);
Glue;
Special tools for creating the wings we need (tools for working on wood or metal).

Preparatory stage.

Stage No. 4 - creating a spinner

When the preparation is complete, you can safely start making the toy with your own hands. Next, we will consider several popular options for creating spinners from various materials in several ways.

Varieties of hand twisters made from improvised means.

Spinner made of paper and cardboard without bearing

The most popular option for those who are in no hurry to run for a bearing and cut out squiggles from metal or wood is to make the first simple spinner from cardboard and paper. It’s really not difficult to do this with your own hands, and if you show a little more imagination, then a simple cardboard can turn into an original canvas for your favorite icons or drawings.

Tools for work:

ruler;
compass;
pencil;
pen;
scissors;
stationery knife;
cardboard;
glue;
toothpick;
nut - 2 pcs.

You can watch the step-by-step process in the video:

Using plastic covers

Another simple way to create a spinner with your own hands, which will take a little more time, is a model from ordinary bottle caps. By the way, this method also does not require bearings. Here's a little step-by-step instructions.

Tools for work:

caps - 4-6 pcs.;
plasticine (you can use kinetic sand);
glue gun;
glue stick;
lighter;
awl;
stationery knife;
toothpick;
scissors.

Progress:

Fill three lids (or more if the spinner has more wings) almost to the top with plasticine. We secure it with a layer of glue from a gun, which should fill the lids to the top.
The main cap remains without filler. We make a hole in it with an awl in the very center. We glue the lids with plasticine on the sides to this central part of the future spinner. It is important to do this at an equal distance from each other.
Take a glue stick and cut off two equal parts - about 1 cm each.
We break the toothpick in the center. We insert it into the central cover and attach pieces of silicone rod to the ends so that it is convenient to hold the piece of wood.
Your DIY spinner is ready!

Wooden with bearing

A wooden spinner is the most pleasant and affordable option, which you can create with your own hands. A real lesson in labor for adults and children!

Tools for work:

Glue gun;
Bearing 2 mm;
Plywood sheet, thickness 5 mm;
Several coins;
Drill;
Hand jigsaw;
Clamp;
Scissors;
Sandpaper;
Pencil or construction marker;
Ready-made spinner template.

Progress:

Print out the diagram and cut it out. We fix it on a plywood sheet and trace it. It is necessary to mark the places in each of the circles where there will be holes.
We drill additional holes on the sides of the circles with the door, allowing us to cut out a beautiful circle shape from the inside of the wing.
The future spinner needs to be cut out of plywood with a jigsaw. Then carefully sand the edges and surface until the surface is smooth.
The bearing must be inserted into the hole prepared for it in the center. If you have difficulty, you can use a hammer and hammer in metal element in a wooden one.
The wings of the “spinner” need to be weighted down—for this you will need coins. You can glue the weights for each hole in the following order: a coin with a face value of five rubles, then two, and again five, as shown in the video.
You can cover it with a solid color paint, or you can decorate it with another interesting and in an original way- there is room for imagination, which is so nice to realize with your own hands.

Video tutorials on creating spinners

To get comfortable with creating a spinner with your own hands, you can watch some video tutorials on this topic. The conditions for creation can be very different, as well as materials and styles, but a homemade spinner can turn out no worse than a factory one.

Here's another way to create paper twisters, this time in the shape of shuriken :

Minimalistic spinner made of bearings and clamps:

Here's a great spinner option for girls:

If you look around, most likely you will see a person who is constantly spinning some kind of propeller in his fingers. This item nothing more than a spinner or fidget - a kind of spinner that consists of a bearing and a petal housing.

The spinner was developed by Katherine Hettinger, who decided to create a useful exercise machine for her daughter with myasthenia gravis. At first, the woman made toys from adhesive tape and paper, and then began producing fidget spinners. Back in 1993, she received a patent for her invention, but no companies were interested in making it. The patent for this toy has long expired, so every second person in the world can produce it.

Spinners are far from being the same type; they vary in size, shape, color, and some can even glow in the dark. They vary in price; some models can cost several hundred dollars.

What is a spinner

What is a spinner, can tell Small child, and an adult respectable man in an expensive car. The spinner has no age restrictions, since its design is designed in such a way that it simply does not have sharp corners or the smallest details.

This device is a gyroscope that is incredibly stable in space. With its help, interesting tricks are performed that invariably attract the attention of people around.

Spinners are produced by a huge number of companies that are trying to surpass their competitors. They are trying to release the most unusual model, for which you won’t have to pay a tidy sum. It is worth noting that no company in the world has pre-emptive patent rights to produce spinners.

Playing a spinner is as safe as possible because it does not require additional devices or any specialized places for playing. The spinner never leads to injury, it not only does not spoil the psyche, but weakens obsessive states and autistic manifestations.

It is worth noting that this device operates solely on physical strength; it does not have batteries or a motor. The spinner is easily set in motion with a snap of the fingers. In order to start the propeller, you simply need to hold the axle between your middle and thumb, and start the blades with your index finger. In some cases, it is possible not to pick up the toy, but simply place it on the table, which greatly increases the speed and time of its rotation.

What is included in this device? The spinner consists of:

covers - inserted into the middle of the bearing and helps to hold the entire structure;
housing - the part that rotates around the bearing;
bearing - the main part, which is a ring stuffed with metal balls.

The rotation time of the spinner is very important, so the most expensive devices are based on high-quality bearings. Although the most cheap option will spin for about two minutes, and the most expensive spinners spin for more than ten minutes.

How to make the spinner spin longer without replacing the bearing? You just need to try to clean it of dust particles and debris that create friction and prevent the structure from rotating for a long time.

You need to clean the spinner using:

acetone;
brake fluid;
thinners oil paints;
isopropyl alcohol;
dishwashing liquids;
soap

In order to quickly dry the bearing of this spinner, it is recommended to use a hair dryer.

There are a huge number of spinners of various types:

single - consists of one blade and a bearing, they are mobile and powerful because they can rotate for up to five minutes;
three-spinner – is a trefoil clover, in the center of which there is a high-quality bearing;
quad spinner - looks like a cross or a mill with four petals, however, it weighs quite a lot and cannot satisfy everyone with its size;
wheel - this type speaks for itself, since it looks like a cart wheel;
exotic - a rather expensive option, since the spinners are made of zirconium or tungsten and are designed in the form of weapons of super heroes or even medieval instruments of torture;
created using a 3D printer - they can be printed and assembled in about an hour, so they are in demand, and they are also quite cheap.

The spinner is rightfully the best toy of 2017, which invariably attracts attention and is a welcome gift for a special occasion.

When purchasing it, you should take into account factors such as aesthetics and vibration, ergonomic or rotational properties, durability and rarity, precision of processing and its quality. These relaxation toys are made from plastic, wood, and metals. different types, skin.

What is a spinner for?

It is not yet clear exactly why a spinner is needed. Some people use it as a toy, a finger trainer, or just a sedative. Agree that it is much more harmless to spin the propeller of a spinner while standing in a long traffic jam than to click a pen or bite your nails. And also this reliable means in order to focus on some information or task.

By the way, a spinner is a rather interesting simulator that can teach the basics of juggling.

So, what is a spinner and what is it for, and what benefits can the use of this kind of toys bring:

will develop fine motor skills of the hands;
will help develop hands damaged during injuries or accidents;
relieves stress and anxiety;
will help to relax while a person quits smoking;
improves mood;
will develop right hemisphere brain;
releases accumulated negative energy;
will increase a person’s response to external stimuli;
will speed up your thinking processes.

The negative aspects of this device include the possibility of injury or swallowing balls from the bearing. In general, spinners are often declared to be a successful marketing project.

How to make a spinner without bearings at home

Having found out the cost of the option they like, many people begin to seriously think about how to make a spinner without bearings at home.

It will be quite possible to make a hand trainer without using expensive bearings. On the Internet it is quite possible to find drawings of such homemade spinners from scrap materials.

This spinner without bearings is made of paper, for this you should prepare:

two sheets of thick A4 paper;
ruler;
compass;
a simple pencil;
toothpicks;
glue for paper and for parts.

How to make a spinner without bearings for children

How to make a spinner without bearings for children can be found on our website. In order to make this kind of structure for kids, all the same elements are used as for an adult.

However, it is worth checking that all details and related materials, of course, were environmentally friendly and safe. For example, for very young spinner users, you can use finger paints and environmentally friendly glue.

When making a design with and for a child, be sure to blunt the tip of the toothpick. Bearings are never used, since the baby can swallow balls from them.

How to make a spinner without bearings and caps

How to make a spinner without bearings and covers? Just try using cardboard and use glue stick caps for the template.

In order to make the main bearing, you need to use a hairpin, a toothpick, a rod from ballpoint pen.

You should use a compass and ruler to measure all dimensions as accurately as possible. Whether the measurements are taken correctly will depend not only on appearance, but also the properties of the spinner, including speed and rotation time.

How to make a spinner without paper bearings

Many young people ask questions about how to make a spinner without paper bearings.

draw a rectangle 9X2 centimeters;
draw diagonals to determine the center;
fold this drawing several times;
cut out about eighteen rectangular pieces;
place two identical coins on their opposite edges;
circle the coins, giving the edges a rounded appearance;
glue all the cut out parts together with paper glue;
to make it heavier, glue it to the edges of the coin with special glue for parts;
measure 2 centimeters using a ruler and compass;
draw and cut out eighteen circles that will become the central bearing;
punch a point in the center that will be slightly larger than the diameter of the toothpick you are using;
insert a toothpick into the center;
put nine two-centimeter circles on it on both sides;
carefully glue the joints of the toothpick and the mug, in no case without sealing the hole itself;
let the future spinner dry and give it an aesthetic appearance with scissors;
practice spinning the structure while softening the friction of the spinner;
color this homemade product in your favorite colors or stick on your favorite logos.

How to make a spinner without bearings from caps

Many people are interested in how to make a spinner without bearings from caps. Of course, the ideal option would be to make homemade spinner using one or more bearings.

When using bearings, you should find the correct main element, wash off the grease from it and remove dust particles. If you make a spinner yourself without bearings from caps, then you won’t have to perform these actions.

You should prepare several caps from plastic bottles in advance, the best option will be the use of three pieces. They will need to be glued to each other on the sides using Moment glue.

In the middle you will need to drill a small hole into which the ballpoint pen will fit. It is worth cutting a three-centimeter piece from the empty rod, which is inserted into the hole.

Rotate this design it will be possible to hold it with two fingers.

How to make a spinner without bearings from Lego

To understand how to make a spinner without bearings from Lego, you should follow simple instructions. To assemble the structure you need to prepare:

a flat and maximally long cube with holes;
kernel;
two round stoppers with a cavity inside;
several flat, round cubes for your fingers.

After all the parts of the future spinner are prepared, you should stretch the rod through the hole of the long cube, and then limit it on both sides.

Then you need to easily and quickly tighten the round platforms intended for the fingers. The side edges of the spinner should be balanced and positioned symmetrically. That's all, you can start relaxing with the help of a turntable.

How to make a spinner without bearings from coins

The Internet is replete with instructions and diagrams on how to make a spinner without bearings from coins. The most simple option will be the one when the simplest spinner is made from caps, on the inner or outside which coins are glued.

You can take coins worth five Russian rubles, and then make holes in them using a drill or soldering iron. Then you should insert three-centimeter pieces of a ballpoint pen into them.

How to make a spinner with your own hands from a plastic bottle

Another popular request on the Internet is how to make a spinner with your own hands from plastic bottle.

To do this, you should select a bright plastic bottle and cut a strip 10-11 millimeters wide from it. This is done in order to cover the bearings, which are 8 millimeters wide.

You should also take thick plywood, three nuts and three self-tapping screws for 19, as well as four washers. Make three holes in the plywood into which you need to insert a nut, a washer and tighten the self-tapping screw.

Bearings should be placed between them, aligning them as much as possible, and millimeter washers should be placed under them. The bearings should be pulled together from a plastic bottle and the structure should be heated with a hairdryer.

After drying, carefully tighten the structure, and then unscrew the nuts. In a few minutes it will be possible to use the spinner.

How to make a spinner with your own hands from wood

To understand how to make a spinner from wood with your own hands, you need to read the instructions or watch an instructional video.

It is quite easy to make for those who have a little knowledge of a drill and a jigsaw. Choosing the right wood is essential, but novice fidget spinners can try creating a masterpiece using thick plywood.

You can come up with a drawing of the future spinner yourself or find it on the Internet. Then you need to attach your drawing to the plywood, trace it, and then cut it out using a jigsaw (preferably an electric one).

The workpiece should be cleaned using sandpaper, a hole is made in it with a jigsaw or drill, since then it turns out much smoother. A little trick for a novice craftsman: you should drill a hole halfway, then turn the plywood over and do the same with reverse side.

Do not forget that the thickness of the plywood should not be thicker than the width of the bearing. If the wood is thicker, it should be trimmed and sanded.

This spinner can be opened with varnish or oil, and also aged using a lighter.

How to make a spinner with your own hands in 5 minutes

How to make a spinner with your own hands in 5 minutes? You should use available materials, for example, bearings and different types of glue; leather, sequins, and beads are used for decoration.

The most original spinners that can be made with just five free minutes are made from cartridges bicycle chain, copper and even from an iPhone unnecessary for its owner.

Kids will quickly be able to create a beautiful and bright spinner from ordinary thick cardboard. Children and parents will have a great time constructing such a toy, and will also save cash for a good book or something useful. Schoolchildren can propose making such a product from cardboard during craft lessons, and the teacher will support this initiative.

It is also possible to create a spinner solely from bearings or not use them at all. In general, there are a lot of options, and what exactly your spinner will be will be determined by a flight of fancy.

How to make the spinner spin faster? You just need to remove excess grease from the spinner bearings. To do this you need to go through several steps:

drip high-quality lubricant;
change a bearing that has served for quite a long time;
change the plastic spinner to a metal one;
place a high-quality plug on the structure that will protect it from dust, moisture and dirt;
clean the spinner several times a week using a hair dryer or a can of compressed air;
do not try to remove and clean the bearing on cheap models, this is simply unrealistic and not provided by the manufacturers.

Sections