Profile for plastic windows lg. LG Chem windows - windows that make you feel at ease! Why plastic windows made from LG Hausys profiles are an interesting offer on the Russian market

An innovative product for your attention High Quality. It is called the Plus system. The thing is that this profile combines additional properties and modern technologies. The main advantages of the profile include:

* Smooth surface that is easy to care for;

* For better drainage, a beveled rebate is designed at the frame and sashes;

* The internal profile space is optimized taking into account innovative technologies used for reinforcement;

* The special arrangement of air chambers inside the profile provides excellent thermal insulation and heat-saving properties;

* The use of innovative technologies and new ideas embodied in the profile design made Plus system profitable investment.

Scope of application of the profile:

* During the reconstruction of old buildings and during the construction of new ones;

* Production of balcony blocks;

* Construction of various types of building structures.

PVC windows with comfort profile L-600

It has a construction depth of 60 mm and four air chambers. This combination is considered very rare, but at the same time it has many advantages over three-chamber profiles with a similar construction depth. Thanks to the use of glazing beads, it is possible to install insulated double-glazed windows in such profiles, the thickness of which ranges from 4 to 34 mm.

Using this profile, you can ensure high thermal insulation in the room, as well as a complete absence of extraneous sounds. The manufacturer was able to achieve this using the LG Hausys L-600 four-chamber profile, which meets the highest European standards.

The small height of the PVC profile ensures an increase in the light opening of the window. To seal the window and prevent drafts, a double rubber circuit is used, which also protects the room from moisture and dust. The use of anti-burglary systems and reinforced reinforcement created high degree protection against penetration and hacking. For use in a wide range temperature range the manufacturer uses additives that are added to the profile during its production. This significantly extends the service life, as well as the properties and quality PVC characteristics profile.

South Korean company LG, which produces household appliances, very popular in Russia. However, not everyone knows that it is a subsidiary of LG Chem, which produces polymers and plastics. LG Chem also produces window profiles from finishing materials LG Hausys. This is what we want to tell you about.

LG Hausys in Russia

Since 2005, both LG Chem and LG Hausys profiles have been sold in Russia. It is the same.

LG Chem warehouse

In 2010, a plant producing LG profiles began operating in Novokuznetsk, and a year later another one - in the town of Elektrostal near Moscow. Since LG CHEM produces polyvinyl chloride, window profiles even at Russian factories are made from their own raw materials.

LG Hausys has developed a special line window profiles especially for the climate of our country. It complies with Russian GOST. In the Korean version, the profile has three, and in the Russian version there are four air chambers. Therefore, when correct installation freezing of windows is impossible even in severe frost.

In Korea, window profile colors predominate Ivory, in Russia – white. Although you can choose any other color to cover the frame.

Description of profile models

Unlike European companies, LG Hausys standardly produces glossy profiles, not matte. Of course, this makes them easier to clean in terms of cleaning.

L-600

Window profile LG Chem L-600

This profile meets the most high requirements to sound insulation and thermal insulation, because it has four air chambers. In addition, all the profiles of this company have a slightly beveled rebate, so the sashes seem to overlap the frame. This makes the window even more airtight.

The profile width is 60 mm. The thickness of the glass unit when installed in the frame is 34 mm.

The double-circuit seal prevents dust and drafts from entering the room.

Reinforced reinforcement gives the profile strength. And if you also order anti-burglary fittings, you can create very reliable protection from burglary.

LG Chem exhibition stand

Heat transfer resistance has a coefficient of 0.68. This indicator meets Russian GOST.

The rounded drainage with an inclination angle of 10 degrees also removes condensate from inside, and rainwater from outside.

Strict, clear profile shapes are not for everyone, although they look ultra-modern and stylish in any interior. And the glossy almost mirror surface of the profile will always look beautiful and fresh, like new.

Profile price starts from 6,600 rubles without installation for a standard window.

L-700

Profile LG Chem L-700

This model of window profiles is in many ways similar to the previous one: the same double-circuit seal, the same U-shaped reinforcement. But it has a number of properties that are superior to L-600. For example, it has more air chambers - five. And the heat transfer resistance coefficient is 0.91. All these qualities make it possible to use the L-700 profile even in the Far North.

A 42 mm thick glass unit increases the sound insulation properties of the profile. So to speak, it makes it possible to listen only to what we want to listen to.

The installation width is 70 mm. Externally, this profile is not similar to its “brother” L-600. It has soft flowing lines, more familiar to Russians. But the plastic is all so glossy and snow-white.

In terms of price, the profile will be only slightly more expensive than the previous model. The cost of a standard window is from 7,200 rubles without installation.

Premium German brand on the Russian market since 1995. With VEKA you get true German quality from a company with a 48-year history around the world.

• ALL profile systems of the highest class “A”
• ALL are made frost-resistant and marked with the letter “M”
• ALL have maximum 4-sided steel reinforcement
• Uniform quality standard regardless of country of production

The more air chambers, the less air exchange and, accordingly, the higher the thermal insulation.

The wider the profile and the greater the installation depth, the higher the thermal insulation.

Profiles ONLY of the highest class “A”

According to the thickness of the internal walls, ALL of our profiles are of the highest class “A” - the thickness of their front wall is at least 3 mm.

• class “A”: front wall not less than 3.0 mm
• class “B”: front wall not less than 2.5 mm
• class “C”: wall thickness is not standardized

Please note that 80-90% of the Russian market are classes “B” and “C” and only 10-20% are class “A” profiles. At the same time, VEKA’s assortment includes ONLY class “A” profiles.

We fundamentally DO NOT use profile systems of classes “B” and “C” (with a front wall width of less than 3.0 mm).

ONLY frost-resistant profiles

According to GOST 30673-99 “PVC profiles for window and door units” for resistance to climatic influences, ALL of our profiles are “frost-resistant” - for areas with an AVERAGE monthly air temperature in January BELOW minus 20°C.

GOST standards for different classes:

• normal version “N”: the average temperature in January is minus 20°C and above
• frost-resistant version “M”: the average temperature in January is lower than minus 20°C

Our assortment includes ONLY frost-resistant profile systems marked with the letter “M”.

Heat transfer resistance (thermal thermal resistance) is the main thermal insulation coefficient. Determined by the ratio of the temperature difference between outside and inside the room to heat flow passing through the window. The higher this number, the better the insulation performance.

Evolutionary double-glazed windows SmartGlass 2.0

Our multifunctional double-glazed windows work for you both in winter and summer. In winter, spraying silver particles retains up to 90% of thermal energy heating devices, and in summer the double-glazed window reflects 25% more solar heat than conventional plastic windows.

• 42% more HEAT in winter (energy saving properties)
• 25% less HEAT in summer (sun protection properties)

All our double-glazed windows contain special energy-efficient glass. We DO NOT use regular glass even in the most basic configurations.

AirDrive I, II and III climate control systems

Optimal ventilation mechanisms are built into the windows - the sashes open slightly by 1-5 mm, depending on the selected mode. Is not external devices(combs or valves), namely BUILT-IN ventilation fittings.

Three options:

• AirDrive I: slot ventilation (1 mode)
• AirDrive II: discrete multi-stage ventilation (3 modes)
• AirDrive III: discrete multi-stage ventilation (5 modes)

We try not to place combs based on their appearance (only at your request). In principle, we do not use valves due to the fact that they violate the integrity of the window, reduce its tightness and strength (since the profile and its reinforcement are drilled through).

MAXIMUM steel profile reinforcement

Reinforcement is a steel frame inside a PVC profile. This is what gives the structure rigidity. The more steel and stiffening angles, the more reliable the window geometry.

Types of reinforcement:

• Square – 100% reinforcement on 4 sides, 4 stiffeners (maximum)
• U-shaped – 75% reinforcement on 3 sides, 2 stiffeners (regular)
• L-shaped – 50% reinforcement on 2 sides, 1 stiffener (very, very bad!)

All our profiles are reinforced to the MAXIMUM - on 4 sides and always with 4 stiffeners.

VEKA technologists managed to achieve a compromise between the unpretentiousness of the matte texture and the spectacular gloss.

Pleasant shine and low sensitivity to external influences are the most noticeable feature of our window systems.

The VEKA profile complies not only with the Russian GOST, but also with the European RAL building standard.

From the article you will learn:

LG Hausys - largest producer profile systems from PVC in the Asian region and one of the world leaders in terms of production and supply volumes PVC profiles for the production of windows, doors and facades.

The LG Hausys company, as the guru of the PVC industry, was in no hurry to enter the Russian market, but, understanding all the responsibility for its performance, watched for 10 YEARS how its European colleagues, with traditional Teutonic passion, made big shots in the Russian open spaces.

In Russia, the company offers only 4 and 5 chamber systems. Based on many years of experience in the production of PVC profiles for Canada and the northern regions of the USA (including Alaska), LG Hausys has made a fundamental decision to introduce systems with enhanced thermal insulation properties to the Russian market. All profile systems are specially adapted for increased thermal insulation. For example, not a single system even PROVIDES the possibility of using a cold bay window and corner connection. Additional and stand profiles have a three or four chamber section. And even the OVERLAY for the steel strip has chambers around the perimeter in its cross-section!

Ranking first in the Southeast region and third in the world in terms of polymer production, LG Hausys has an industry-leading research and development center, which brings together the best chemist technologists from around the world. The many years of work of this department have resulted in a recipe that is balanced in all respects, which best suits the harsh Russian conditions and in many ways exceeds the requirements of GOST.

Read also: Plastic windows Thyssen (Thyssen)

LG HAUSYS L-600 NR

Characteristics :

• Profile width 60;
• Number of cameras 4;
• The color of the seal is black;
• The thickness of the forming wall is 2.7 mm;
• The size of the frame overlap with the sash is 8 mm;
• Eurogroove for fittings 16 mm;
• The axis of the fitting groove is 13 mm;
• Glass thickness from 5 to 34 mm;
• Seal material EPDM;
• The reinforcement in the frame and sash is the same.

LG HAUSYS L-700 NR

Characteristics :

• Profile width 70
• Number of cameras 5
• Seal color black
• Form-forming wall thickness 2.7 mm
• Sash frame overlap size 8 mm
• Eurogroove for fittings 16 mm
• Fitting groove axis 13 mm
• Glazing thickness from 13 to 42 mm
• Seal material EPDM
• The reinforcement in the frame and sash is the same

1. LG Hausys began its historical development in 1947 operating under the name "Lucky Chemical Industrial Corporation".
2. 1962 - a division called "Lucky" was spun off from the "Lucky Chemical Industrial Corporation" to produce PVC products.
3. 1966 - Company name changed to Lucky Chemical Industries Co, Ltd.
4. 1974 - the company name was changed to “Lucky”.
5. 1979 - Lucky's main research and development center opens in Daejeon, Korea.
6. 1982 - expansion of the plant for the production of PVC products was completed.
7. 1987 - a plant with a production capacity of 300,000 tons of PVC was put into operation.
8. 1995 - a decision was made to change the name of the company to LG Chemical Ltd.
9. 2000 - Hyundai Petrochemical's plant was acquired for the production of PVC products in the United States.
10. 2001 - production volumes increased by 90,000 tons of PVC products.
11. 2003 - a decision was made to increase the production volume of PVC products to 500,000 tons at the plant in Yesu (South Korea).
12. 2004 - a decision was made to enter the Russian market with PVC profiles produced in Jeongju (South Korea).
13. 2009 - the company name “LG Chem” was changed to “LG Hausys”.
14. 2009 - the first LG plant was opened in Russia for the production of PVC profiles.

Read also: Plastic windows Gutwerk (Gutwerk)

Why is it worth purchasing LG PVC windows?

LG Hausys fundamentally does not follow the beaten path, which, unfortunately, is typical for many well-known European manufacturers. Reducing the thickness of the external walls by 5-10 percent is, on the one hand, a generally accepted method of reducing product prices, without contradicting the requirements of GOST, but, on the other hand, it significantly worsens the overall strength, static and thermophysical parameters of the finished window. This path is unacceptable for LG Chem, which does not seek compromises on quality issues. General principle company - supplying high quality products at competitive prices.

Surface treatment special methods allows you to achieve a special degree of gloss, which in turn has a positive effect on appearance windows, reducing the degree of contamination of the profile due to the deposition of natural dust on it. Which is especially important due to its quantity typical for our urban conditions.

LG Hausys is a division of the international corporation LG, which has long been known in Russia. Both in terms of volume and productivity, LG Chem is the leader chemical industry Korea. The company has annual sales of US$50 billion and 10,000 employees. Every day the company takes another step towards strengthening its leading position in the domestic market and creating successful destinations beyond the borders of Korea.

LG HAUSYS windows are designed specifically to meet the demand for reliable,... They are fully worth their price, they show excellent results in heat conservation and durability, in addition, they provide complete thermal insulation and absence of noise from the street.