Hammock stand. DIY hammock stand made of metal Wooden frame for a hammock drawing

For many residents of the metropolis, the dacha has become a chance to escape from stuffy everyday life to the refreshing breath of nature. This is why everyone is so eager to get away from the city and forget about work and pressing problems at least for the weekend.

And most importantly, get a good night's sleep!

Yes Yes! Who doesn’t dream of relaxing and getting a good night’s sleep at the dacha? Fresh air, aromas of flowers and wild herbs, chirping birds, all this sets you up for a wave of relaxation. Perhaps, in such conditions, no one would want to spend time in a stuffy house.

Why not sit comfortably right in the yard? A hammock, which combines convenience, simplicity, and reliability, will be a reliable help in this matter.

Unpretentious plant, which will decorate the garden behind the plant, its propagation and much more are discussed in our article. Rocking chair - perfect place rest, but expensive pleasure. Find out how to make a rocking chair with your own hands - with photos and explanations.

What is a hammock?

Initially, the hammock was a small piece of mesh, which was attached at both ends. The resulting stock was very popular throughout the Caribbean.

Over time, they began to use a single piece of fabric for the hammock, which significantly increased its convenience and comfort.

Since then, for many years now, it has been used as a convenient stock, capable of quick carrying and easy transportation. This makes a hammock simply indispensable for a country holiday.

Choosing a place

The choice of place to install a hammock should be taken very seriously. After all, its correct functionality will depend on this.

The selected area should not be in a drafty area, so as not to get sick after a well-spent weekend.

It also needs to be protected from direct sunlight and places where water accumulates after rain.

As a rule, hammocks in the country are hung between two trees, choosing the most shady place in the territory. This arrangement of the bed brings a person closer to nature and gives him the opportunity to have a good rest.

Also, at the dacha, you can hang a hammock on pergolas or wooden canopies. The main thing is that their design is strong enough. In this case, you get shade from the sun, a roof over your head during rain, and the pleasure of a pleasant pastime - all in one.

Have you bought a hammock? How to properly hang a hammock at the dacha, watch our video:

More instructions:

Most popular types

Manufacturers are constantly working to create new types of hammocks. Everyone wants to make their product better, more convenient and comfortable, thereby attracting more consumers.

Today, the most popular among summer residents are three types of hammocks:

1. Suspension- This is a traditional type of hammock that everyone is accustomed to. The main feature is practicality and reliability. They are easy to transport from place to place and can be quickly installed. It is enough to find two trees standing at the required distance from each other and hang the hammock, securely securing it with tension parts. Instead of trees, you can also use poles.
2. Frame hammocks are also popular among summer residents. They have different shapes and any sizes. Main feature And distinctive feature is that they can be placed absolutely anywhere. To install a frame hammock, you don’t need to look for two trees or poles; it can be placed both at home and outdoors. They are prefabricated and stationary. The latter are especially durable, but you can’t take them with you fishing or barbecuing.
3. Non-standard types hammocks differ in their shape and cost.

A frame hammock is chosen by lovers of reliability and comfort

The most popular non-standard ones are:

• a hammock chair, where it is convenient to drink a cup of aromatic tea or work on a laptop;
• hammocks-swings, which are loved by little summer residents, and adults too;
• a hammock with a canopy that will protect from both the sun and rain, etc.

A good option is a children's hammock, covered with a mosquito net and a sun canopy. While the kids are sleeping on fresh air, parents can safely work on the site. The child is under the supervision of adults and is safe.

Pictured is a hammock chair

Hammock swing

We make it ourselves – easily and economically!

The hammock is quite exotic for the domestic summer resident, who, even recognizing beneficial features the latter, is in no hurry to purchase it, because he considers this pleasure too expensive and troublesome to install.

Specialty stores offer quite a lot ready-made solutions for every taste and budget, but there is an easier way to increase the comfort of relaxation at the dacha - make a hammock for the dacha with your own hands.

This is quite simple to do, and the cost of materials will be minimal.

Choosing a shape and material is the first step

Anyone can handle the manufacturing process. First, you should decide on the materials for fasteners and stock. If the hammock is wicker, then it is better to give preference to natural fabrics. Synthetic material more difficult to operate and less durable.

There are some requirements for a hammock with a solid fabric. So, for example, when choosing canvas, you need to be prepared for difficulties in sewing.

Having chosen the type of hammock and material, you can begin further work on production, and very soon ready product will not only please the eye, but also contribute to excellent relaxation.

From the drawing in the photo you can understand how to make a hammock with your own hands:

Step by step towards the goal

Manufacturing process:

1. Step 1. Blanks. To make the simplest hammock, you will need fabric (two pieces of 1x2 m), wooden blanks (two sticks one meter long), a cord (20 meters long), eyelets, metal rings for fastening holes on the fabric (10 pieces). The cord must be selected so that it can withstand the required weight with a significant margin.
2. Step 2: Sewing. Two pieces of material are folded facing each other and sewn together. It is necessary to leave a pocket half a meter long through which the fabric will be turned inside out. Subsequently, filler, for example, padding polyester, can be added to the pocket. After this, the narrow edges of the material are folded ten centimeters and stitched. The folded edge of the material should face down when hanging the hammock. After the fabric has been stitched, it is necessary to notice the edge for the eyelets every 10 centimeters.
3. Step 3. Hinges and wood blanks. Eyelets are inserted into the holes made with a drill on the narrow edge. If they are not available, you can use ordinary metal rings or cord loops. Similar markings are made on the sticks with the same placement of loops on the fabric. Holes are drilled on the sticks so that the doubled cord can enter freely.
4. Step 4. Fasteners. A 10-meter piece of cord is cut into 10 pieces. Each of the segments is threaded into a stick, then into a loop or grommet and again into the same hole on a piece of wood. After which all the pieces of cord are gathered together and tied in a knot.

Making a hammock step by step

When attaching a hammock, it is necessary to take into account the reliability of the support. If trees are chosen as the basis, then they must have a trunk thickness of at least 0.2 meters.

The distance to the ground is a meter or one and a half. The hammock is attached to metal rings that need to be driven into the support. The fasteners can also be additionally secured with bolts.

The video shows in detail how to make a hammock with your own hands:

Frame hammock - reliability and simplicity

For those who value, above all, convenience and reliability, a hammock with a frame is suitable.

Making a frame for a hammock, which will serve as a support for the bed, is not at all as difficult as it seems. The material for the frame is most often metal, simply because it can withstand more weight.

Wooden frames are a little less common, however, here it is necessary to take into account the type of wood, which is related to the ease of work and strength of the material. It is best to use oak or pine.

Most simple frame serve two ordinary timber, dug into the ground half a meter. The length of the bars depends on the height at which the hammock hangs and the presence of an additional canopy over the bed.

If the hammock should be stationary, then the process of creating the frame will be as follows:

1. Step 1. Need to prepare following materials: two oblong planks at least a meter long (arched or straight with a standard section), a block for fastening the racks, several blanks for the “paws” on which the structure will rest, bolts.
2. Step 2. The racks are attached to the beam, which acts as a base using bolts. Bolts and nuts must be galvanized or made of stainless steel. The fasteners must be reliable, so you should take extra bolts.
3. Step 3. The block on which the posts are attached is attached to the legs, after which the hammock is attached. To fasten the hammock, you need to use special hooks or simply fasten a metal ring to the bar. The design is easy to carry and, if necessary, can be quickly disassembled and reassembled.

The video below provides an overview and instructions for making a hammock chair.

In a word, making a hammock with your own hands is not at all difficult and not expensive. With just a little work you can get an irreplaceable place to relax in your country house.

Hammock hammock - discord

Convenience, comfort, reliability and lightness are the undeniable advantages of a properly installed hammock.

It is important to hang or place the hammock in the very beautiful area garden. This could be an area near the pool, the main thing is that there is a picturesque view and as little noise as possible. After all, this is a place for your relaxation. And relaxing while enjoying the beauty of nature is doubly beneficial!

Making a frame for a hammock with your own hands is good idea. These products are quite expensive, but their design is simple. Therefore, creating a stand for a summer house yourself will not be difficult. You just need to choose a suitable drawing, purchase some materials and spend a few hours of time.

A lot of effort will have to be put in if you need a stand with rounded shapes, as in the photo. In this case, you need to have a special tool for bending wood. This is quite labor-intensive and requires certain experience. There are simpler drawings for beginners.

What to make it from?

A DIY hammock stand is made of wood or metal. The difficulty of working with both materials is approximately the same. Below are drawings of frames for summer cottages made of wood and metal.

Wood frame

The wooden support has a long service life, is quite durable and aesthetically attractive. She will not only become useful item for a pleasant stay, but also for decorating the dacha.

For work you will need:

• saw, jigsaw or grinder;
• hammer, mallet;
• screwdriver;
• furniture conductor;
• clamps.

Materials:

• Wood. Beams and boards are required.
• Hardware – self-tapping screws, screws, nuts, washers, hooks (eyes).
• Furniture glue or PVA.

The stand is created in several stages:

1. Preparation of all parts of the future structure.
   • Base. Consists of two beams 1850 mm long and two boards 1500 mm long. Grooves are made on the beams at a distance of 200 mm from the edges. The depth is equal to the thickness of the boards used, the width is the width of the boards. At the ends of the beams, at a distance of 20–40 mm, holes are made for bolts. The beams are laid on boards parallel to each other at a distance equal to the thickness of the support beams used (on which the hammock will be hung). For better fixation, you can connect them using wood glue or PVA. In this case, the product must be clamped at the joints.
   • Supports. 2 beams 1700 mm long are required. At one end a cut is made at an angle of 45°, at the other there is a hole for a hook. 2 supports with a length of 520 mm are also made.
2. Opening with varnish. Since the stand will be used in the countryside, in the open air, it can be opened with alkyd compounds - the smell will disappear quickly enough. All openings must be protected before processing.
3. Assembly of the structure. If the parts are made correctly, then there will be no problems with assembly - the drawing provided above will allow you to complete the work without difficulty.

Metal frame

The presented drawing shows a stand made using metal pipes and special connecting elements. You can choose the dimensions of the support yourself, depending on the dimensions of the hammock and the amount of free space in the country house. The main thing is not to change the width of the support. Drawings indicate optimal value, which is guaranteed to make the product stable. The connection points can be additionally secured with through bolts. You can also cut threads.

Bentwood frame

This product is well suited for those who like complex tasks. The frame has simple design, the most difficult thing in the work is to bend the beams. To give wood a similar shape, it is necessary to soften, bend and dry it. There are several ways to make a material plastic:

• Steam finishing. The beams are loaded into a pre-prepared box, and steam is supplied to it. For every centimeter of beam thickness, approximately 1 hour of processing is required. You can also perform treatment with a steam generator.
• Soak in hot water.
• Use ammonia solution. How longer tree is in it, the more plastic it becomes.

After the required softness is achieved, the wood is bent. To do this, they either use special machines, or simply place the beam on supports, and place a load in the middle. The greater the bend and the longer the material, the higher the supports will be required.

With the arrival of warm spring days, summer residents try to spend as much time as possible on their plots. But after grueling physical work, it wouldn’t hurt to rest. Unfortunately, not everyone has a fully equipped house in addition to a garden. Therefore, many people would like to use a hammock as a place to relax (photo 1). But then you have to decide how and where to hang it, choosing appropriate place. But there is another solution to this problem - you can make a stand for it and install it where it is most convenient.

Brief history

It turns out that the historical homeland of the hammock is America, and the direct inventors of the unusual bed are its indigenous inhabitants - the Indians. The reason for hanging places for rest and sleep was not the desire to soak up the light breeze of a fresh breeze, but the desire to protect yourself from snake bites and insects crawling on the ground. In addition, the climate made it quite possible not to think about significant temperature fluctuations within a day. Special credit also goes to the sailors who brought this invention to Europe. But in those days, only trees and other suitable vertical places were used as support and fasteners. More recently, people have realized that it is very convenient to have a hammock stand. Then the “bed” can be used both outdoors and indoors. Let's look at what types of stands there are and what the principle of their manufacture is. Using one of the models as an example, we will analyze the step-by-step procedure of work.

How to choose a hammock stand? Description of the most common types

All structures are classified primarily by external configuration:

Hanging;

Having a monolithic frame;

Mounted on a prefabricated stand.

The latter are the most convenient to use, as they take up minimal space and, if necessary, can be quickly assembled and installed. The materials used to make most stands are metal or wooden blocks. Designs and shapes vary. Among non-removable frames, those curved in the form of an arc are considered the most stable (photo 2). In addition to being practical, such models also have a very attractive appearance. Stands for “sitting” hammocks are slightly different in design.

How to make a hammock stand (photo 3)? Main stages of work

It’s quite easy to make a structure for securing a mesh bed at home. Let's consider in general outline, what a simple hammock stand should look like. The dimensions given in this example are standard and can be changed depending on design features“lying” zone - length, depth, width of the canvas. All readings in the table are given in centimeters.

Features of the technology for connecting some parts

When making a hammock stand with your own hands, you should pay special attention to the reliability of the connection of all parts. If work is performed poorly, there is a danger at any moment, especially when swinging, of compromising the integrity of the structure, which can lead to injuries from falling of something in the mesh. hanging bed person. Therefore, please note (using the example of photo 4) that when the diagonal guides are lengthened and, accordingly, the entire structure is raised, the load on the fasteners increases significantly. For greater reliability, use oblique slats, which are additionally attached to the top, connecting the base of the stand and the side part. It is also possible instead of one screw through hole make two or three, distributing them in several places on the lower support.

Choosing equipment for babies

When purchasing a children's hammock stand or making it yourself, you need to take into account the presence of several mandatory properties of the product:

Stands with a double base are considered the most reliable. So, for example, the product described above can be made slightly different - the diagonal guides can be supplemented with another part (which will make the “sidewalls” in the form of a triangle), and the load-bearing horizontal part can be supplemented with a parallel one.

Assembly reliability. It is most advisable to opt for complete structures, that is, assembled only once after purchase, and not constantly.

Practicality of the product. Many models, especially for the smallest ones, may additionally have a number of devices - protective mosquito net, sun awning, swing limiter, etc. Of course, such stands will have a higher cost. Therefore, when purchasing a product, check the general functionality.

As you can see, such a simple product as a hammock can become not only a useful item, but also quite a modern one. designer piece, capable of decorating any interior.

Singletracks.com

This hammock can be made from ordinary cheap lining fabric, tarpaulin, linen, cotton, burlap - or anything. It looks simple, but it can be assembled in literally minutes.

What do you need

• 2 thick strong ropes 3–4 m long.

How to do

Fold the fabric in half lengthwise, fold the edge like an accordion and make a small loop out of it. Thread a rope through it and tie knots as shown in the video. Tie the second rope to the other edge of the fabric in the same way.

You can first prepare a hammock to which the ropes will be tied, or you can first tie the ropes to the support and then to the hammock. The knot described below is suitable for both methods. Just choose the one that is more convenient for you.

Wrap the rope around a tree, pole or other support. Make a small loop at the long end of the rope to which the hammock is attached. Thread the same side of the rope into it and tighten it. Thread the other end of the rope into the resulting loop and tighten again.

Carabiners will make the design more convenient and mobile.

What do you need

• 2 carbines;
• 2 thick strong ropes 0.5 m long;
• a rectangular piece of fabric (approximately 3 × 1.5 m or less);
• 2 thick strong ropes 3–4 m long or 2 tie belts 1–1.5 m long with loops at the ends.

How to do

Attach a carabiner to the middle of a short rope. Fold the fabric in half lengthwise, fold the edge like an accordion and make a small loop out of it. Thread the fastened carabiner into it and tie a knot, as shown in the video. Tie the carabiner to the other end of the fabric in the same way.

You can attach carabiners to a rope or to tension straps.

Tie the rope to the support in the same way as in the previous method. Thread the long end of the rope into the carabiner and pull it out. Wrap the elongated part around taut rope four times and tie a knot as shown in the video.

The advantage of this knot is that it allows you to adjust the height of the hammock. The knot moves freely along the rope, but remains motionless when tensioned.

If using a strap, wrap it around the support, thread one end of the strap into the loop at the other end and tighten. Attach the carabiner to the loop on the long side of the belt.

bonniechristine.com

A simple option for those who don't want to bother with knots.

What do you need

• a rectangular piece of fabric (about 2 × 1 m or more);
• threads;
• needle or sewing machine;
• 2 thick strong ropes 4–5 m long.

How to do

Fold the fabric on both narrow sides by 10–15 cm and sew. If possible, it is better to use sewing machine. The seams must be very strong.

outsidemom.com

Thread the ropes into the resulting loops and pull the fabric in the middle. Then tie the ropes to the supports with strong knots.

Laconic, convenient and quite simple design.

What do you need

• a rectangular piece of fabric (approximately 2.5 × 1 m or more);
• threads;
• needle or sewing machine;
• scissors;
• 32–36 large eyelets;
• drill;
• 2 metal rings;
• 2 strong ropes 10–15 m long;
• 2 carbines - optional;
• 2 strong ropes 3–4 m long or 2 lashing straps 1–1.5 m long with loops at the ends.

How to do

Fold the fabric on both narrow sides by 5–10 cm and sew by hand or by machine. Make holes for eyelets on these folds at equal distances and secure them to the fabric.

littledogvintage.blogspot.com

Using a drill or other tool, make holes on the slats at the same distance as between the grommets.

Thread the rope into the metal ring and leave an end of 30–40 cm. Thread the long end into the first hole in the rail, then into the grommet from the outside. From the wrong side of the hammock, thread the rope through the next eyelet, through the rail and again into the metal ring.

From the grommet you can thread the rope into the same hole on the rail through which it passed before. This method will provide an even stronger attachment. But to do this you need to take a longer rope and make wider holes in the slats.

littledogvintage.blogspot.com

Secure the remaining ends of the rope to the ring with strong knots. Make the same design at the other end of the hammock.

You can attach carabiners to the metal rings and hang the hammock from the supports as shown in the previous methods. You can also thread other strong ropes through the rings and tie them to the supports.

This option is more complicated, but such a hammock will become a real decoration of the garden plot.

What do you need

• a rectangular piece of fabric (approximately 2 × 1 m);
• 30 not too thick ropes 50 cm long - optional;
• stationery pins - optional;
• threads;
• needle or sewing machine;
• 14 beads - optional;
• scissors;
• 2 wooden slats according to the width of the fabric for the hammock;
• 24 small nails;
• hammer;
• 2 metal rings;
• 2 strong ropes 15 m long;
• 2 carbines;
• 2 tie straps 1–1.5 m long with loops at the ends.

How to do

You can decorate the hammock in advance if you want it to look more interesting. Fold the long edges of the fabric a couple of centimeters, place the ropes vertically at equal distances and pin them together for security. Then sew the fabric along with the ropes and weave them into a pattern, as shown in the video. You can add beads for beauty.

On the narrow sides of the fabric, make 5cm long cuts approximately 8cm apart. In the middle of each slats, nail 12 nails at a distance of 3-4 cm. Place a ring 60 cm from the slats, thread ropes through it and weave a pattern, as shown in the video.

You will get two parts from rings and ropes. To attach them to the hammock, thread each loop of rope under the slits on the narrow sides of the fabric. Fold them over, pin them and sew them. Then hang the hammock using carabiners and straps.

Hammock using macrame technique

With wicker elements you can not only decorate a product and give it strength, but also make a hammock out of them from scratch.

What do you need

• drill;
• 2 wooden slats 1 m long;
• 10 braided cords 9–10 m long;
• 2 metal rings;
• 2 carbines - optional;
• 2 tie-down straps 1–1.5 m long with loops at the ends or 2 strong ropes 3–4 m long.

How to do

Using a drill or other tool, make 20 holes in each rail at the same distance from each other.

Take one cord, fold it in half, thread it into a ring and tie a knot. Tie all other cords to the ring in the same way.

For convenience, hang the ring on a hook. Thread each cord through the holes on the rail. The distance between the ring and the rail should be about 20 cm. Then weave the pattern as shown in the video.

Finally, thread the cords through the holes of the second rail and tie to another ring. You can tie such a hammock using carabiners, belts or ropes, as in the instructions for fabric hammocks.

By the way, if you have absolutely nothing to tie the hammock to, you can make the supports yourself. For example, massive wooden stand, resembling a boat:

Or a simple support of two beams:

minartanddoori.com

Perhaps the most unusual way make a cozy place to relax. A hammock chair will not take up much space, so it can be hung not only in the garden, but even on the veranda or balcony.

What do you need

• padding polyester;
• scissors;
• 1 metal hoop with a diameter of 95–100 cm;
• threads;
• 1 strip of fabric 3 m long and 20 cm wide;
• needle;
• stationery pins;
• square piece of fabric (approximately 1.5 x 1.5 m);
• 4 tie-down straps, approximately 3 m long.

How to do

Cut several strips of padding polyester approximately 20 cm wide. It is necessary to make it more comfortable to sit in the hammock. Wrap the padding polyester around the hoop and tie with thread.

Then wrap a strip of fabric around the hoop and sew it so that the padding polyester is not visible. For convenience, secure the fabric with pins.

Place the hoop in the middle of a large piece of fabric and cut a circle, the diameter of which should be 20-25 cm larger than the diameter of the hoop. Cut small symmetrical notches on the fabric blank with four sides. They are needed to provide a place to hang a hammock.

The hoop should be located exactly in the center of the fabric circle. Pull it lightly under the hoop, bend it and sew it very firmly to the hoop.

In those places where there were notches in the fabric, the hoop will be visible. Thread a belt through this hole and sew it up so that a loop is formed around the hoop. Sew three more belts in the same way.

Tie the straps to the supports so that the hammock hangs at an angle.

This chair will appeal to both adults and children.

What do you need

• drill;
• nails or screws;
• hammer or screwdriver;
• a rectangular piece of fabric (sizes will be stated in the description);
• threads;
• needle or sewing machine;

How to do

Using a drill, make holes in two thick slats on both sides at a distance of approximately 9 cm from the ends of the slats. The diameter of the holes should be such that thin slats can be inserted into them.

After 5 cm from these holes, make one more hole a little smaller diameter. The rope will be inserted there. Insert thin slats into wide holes on thick slats and secure with nails or screws.

The width of the fabric should fit between the small holes for the ropes, and its length should be greater than the length of the prepared one. wooden structure. Firstly, the fabric will need to be folded, and secondly, it should sag a little so that you can sit in the chair.

Wrap narrow side fabric around thick slats and sew by hand or machine. Insert a short rope into the free holes in the top rail of the hammock and tie each of them with a strong knot near the rail. In the same way, tie two long ropes to the bottom rail.

Then tie all four ropes to the third thick batten. Make two more holes in it for the rope, insert it, tie it and hang the chair by some hook or thick branch.

This hammock looks more impressive, but it will take a lot of cord to make.

What do you need

• drill;
• 3 thick wooden slats approximately 80 cm long;
• 2 thin wooden slats approximately 90 cm long;
• nails or screws;
• hammer or screwdriver;
• 2 thick strong ropes approximately 1.5 m long;
• 3 thick strong ropes approximately 2.5 m long.
• 16 braided cords 8–9 m long.

How to do

Make exactly the same wooden frame as for the fabric hammock chair. You can immediately tie ropes to it and connect it to the third rail, to which the frame will be suspended. This is also done in the same way as in the previous method.

But the seat itself will be woven from cords. Fold each of them in half and tie it to the top rail of the hammock (if you immediately connected the structure to the third rail, then the rail you need will be in the middle). Then you can weave a chair in the same way as a regular hammock made using the macrame technique. But you can make a more original pattern.

When you tie all the cords to the rail, you will have 32 cords hanging down. Take four of them and place the first cord under the last one.

hunker.com

Place the last cord under the middle two and pass it through the loop. To finish the knot, repeat the same steps again. Then make knots from the remaining cords in the same way.

hunker.com

In the second row and in all even rows, repeat the knot, starting from the third cord from the beginning, and in odd rows - from the first cord.

hunker.com

The entire hammock will consist of identical nodes, which alternate with each other in a checkerboard pattern. This is what this weaving looks like:

To tie the hammock base to the bottom rail, wrap four cords around it and tie a strong knot.

The hammock is hung in the same way as the previous one.

A good rest is, first of all, an opportunity to feel comfortable, well, at least for some time, not to think about the essentials and little things that distract you everywhere, everywhere and all the time. This means that all these little things must be immediately foreseen and eliminated, even before they manifest themselves. Let's say you decide to relax on your summer cottage, in a hammock, what could be simpler and more enjoyable!? But no, the distance between the trees is not enough to tie up a hammock, then the sun hits your face or, on the contrary, it is not enough. In general, it’s a small thing, but it’s so boring and annoying that it could easily ruin your day off. That is why we want to offer you one of the options that will become universal - this is a stand, or you can say a stand for a hammock. Its advantages are obvious. It is mobile, quite lightweight, will protect the bark of your trees from damage, in fact, a worthwhile device. It is this option, about making a hammock stand with your own hands, that we will talk about in our article.

There will be 3 options in total, all of them are similar and akin to each other. Which one to choose is up to you. We will only say that all of them do not require significant effort during assembly; they are made of available materials and quite practical.

DIY hammock stand option 1

So, the first option will require wooden blocks, studs, nuts, washers, grinder, hacksaw or circular saw, stain, drill, hooks and your skillful hands. Take a look at the drawing, it will be the starting point.

Actually, all the dimensions for the bars can be seen in the drawing. The section of the bar is 80*80. You will also need a board, 100*30.
Now we proceed directly to the manufacture of the rack. We measure, cut, drill, assemble, twist.

The last operations will be sanding, it’s good if you have a machine for this, and painting with stain and varnish.

All that remains now is to pull up the hammock and enjoy relaxing in the lap of nature.

DIY hammock stand option 2

The second option will require approximately the same belongings and materials from you. The same timber, the same studs, except perhaps general design the hammock will be slightly different. Also take a look at the drawing...

All sizes can be taken from it. We also process the parts and fasten them together. Fundamentally, the only difference is a different design, that's all.

This is how the main parts are fastened together...

The finished hammock can also be coated with stain and varnish.

There is a leg on one jib to make it more comfortable to lie down in the hammock.

DIY hammock stand option 3

The third option is nothing more than a special case of the previous two. The main difference is that it uses jibs to prevent the hammock from swinging to the sides, which will make it somewhat more stable. A 50*100 board is used for these jibs. But you can find out all the other sizes of the parts used from the table.

And here is the drawing itself - a sketch

As a result, a hammock stand is assembled from the parts using fasteners (studs, nuts, screws).

To summarize about making a hammock stand with your own hands...

When making hammock stands, the most important thing is to decide which option you will like. In principle, they are all functional and viable, except that they are somewhat different in appearance. Additionally, I would like to say something about stiletto heels. Their use here is completely justified. The thing is that the tree can dry out or squash over time. So, you can always tighten the studs, and thereby restore the rigidity of your hammock stand.
Well, let’s not even mention the fact that such a stand made by yourself will cost you much less than store-bought options, which are also found by the way.