Today it is samples traditional architecture become a trend and gain popularity. It's prestigious to have a beautiful wooden house, country cottage, made of logs. At the same time, new technologies are emerging modern materials: they allow you to erect buildings quickly, reduce the load on the foundation and achieve good parameters on energy efficiency. In addition, construction costs are also reduced.

You can build a cottage from an innovative material, but visually it will appear wooden. This is achievable if you buy a block house. It consists of plates with a cross-section of a complex shape: their inner surface is flat, but the outer surface imitates a rounded log. Covering a house with such lumber creates the complete illusion of wooden masonry.

Features of a block house

Many people are interested in how much a block house costs, how profitable it is to use it finishing works, façade design. Manufacturers present options in various price categories. The determining factor here is the type of lumber.

Experts and craftsmen note: strength and durability do not depend on the type. All panels are equally reliable and have decent operational properties. The boards are made from proven raw materials, dried in the same chambers, using the same technology. But they are divided into varieties at the final stage of production. When sorting, visual characteristics are taken into account to a greater extent: the amount of darkening, the density of marks from knots, and the accuracy of geometry.

The advantages of popular lumber deserve attention:

• The quality is strictly controlled. All boards are durable and attractive high resistance, wear resistance.
• People like sustainability. The material is natural, natural wood is used.
• The block house is not subject to deformation. Its shape will remain original even after prolonged use.
• The lumber is adapted for use in difficult climatic conditions. It is not afraid of serious temperature differences, humidity and wind loads.
• Installation is carried out without problems, ventilation cuts are provided to prevent the accumulation of condensation.

A block house from the StroyLesGroup company is attractive due to its price per m2, since the material is supplied from the manufacturer, eliminating intermediaries.

Block house from StroyLesGroup

Choose reliable ones Construction Materials in a specialized company! We have a large assortment, panels available different varieties in any required volume. Warehouse capabilities help to quickly cope with orders for large deliveries. Delivery is made promptly, strictly within the agreed time frame.

Block house - modern finishing lumber for external and interior decoration walls imitating a rounded log. It consists of panels from natural wood and is made from logs along with lining. Cutting a log using the square-in-a-circle technology makes it possible to obtain four rounded blanks for panels, and from the remaining part with a rectangular cross-section, boards or beams are produced. This manufacturing method is suitable for industrial production a diverse range of products in large volumes. A small batch of products is obtained from edged boards, rounding its profile with milling machine. High-quality, convenient joining, like that of the lining, is ensured by tongue-and-groove fastening. IN assembled form the panels give the impression of a real log wall. They can be used for finishing external and interior walls residential premises, cafes, country houses, loggias, baths, trading floors. This type of surface design allows you to save time and money on plastering.

Types of panels

The products are produced in three grades and are also classified according to the type of raw materials and sizes. Products of grade “A” may have a knot on the front side and no more than two shallow cracks per 1.5 m of length. Grade “B” is allowed to have 4 knots and one spot of contrasting color. Grade C wood may have up to 5% of its surface defective. The panels are made from coniferous and deciduous wood. The most common products are made from pine and larch. Their light wood has a beautiful texture. This material is easy to process and can be tinted in any color. For external wall cladding, larch panels are often used, since it is not susceptible to rotting, is not afraid of temperature changes and is not affected by insects. Hardwood products are most often produced from alder, aspen, and linden. Buyers can choose the width of the product, which ranges from 90 to 180 mm. Standard length panels are 3 and 6 m. The thickness and radius of the arc are also different. Larger boards are best used for external walls or spacious rooms. For small rooms would be more suitable flat options, which will create a spectacular relief surface without significant damage to the space. It is necessary to take into account that the panels are laid on the sheathing, which also reduces the footage.

Advantages of panels

The advantages of panels of this type are obvious. They are made from environmentally friendly natural raw materials. Walls with this finish “breathe”. The material is beautiful and durable. Coniferous wood varieties are quite affordable. Thanks to antiseptic treatment, the material is not affected by fungus and mold. One of the most important points is that these products undergo high-quality drying and their humidity is below 15%. This prevents deformation, cracking, twisting, and reduces the weight of the boards. The material is lightweight and extremely easy to assemble. The tongue-and-groove fastening system in conditions optimal humidity wood provides good fixation. The disadvantages of wood are well known to everyone. First of all, this is low moisture resistance and all the problems associated with it. At big difference temperature of the wall and air under the panels, condensation may form.

Panels of this type allow you to recreate an environmentally friendly design in an already built house or in standard apartment. They will fill the space with the aromas of wood, especially if they are made of coniferous species, and the owners will not have problems with cracking of the material, settling, joining, and sealing cracks, as happens with real logs.

21438 0

Block house is one of many types of lumber used for cladding external and internal walls. In appearance it imitates a natural log, the connection is made in a tenon/groove manner.

Depending on the quality of the wood, it is divided into several grades.

Due to the fact that assessing the quality of a block house largely depends on subjective factors, manufacturers often offer mixed varieties in one batch. In such cases, lumber is designated AB or BC. A block house is made from several types of wood; the characteristics of the lumber have a great influence on the cost.

Larch is used for finishing the most prestigious houses, and is often used when lining bathhouses. The most common lumber is made from softwood. The price, taking into account the type and quality of wood, ranges from 400–1600 rubles/m3.

There is no single standard for sizes; each manufacturer works according to their own technical specifications, which depend on the capabilities of its equipment. The main requirement when choosing is to buy materials from only one manufacturer.

Before starting installation, it is recommended to let the material stand for a little while; if you plan to cover the internal surfaces of the walls, then let it lie unpacked in the house for several days. The block house for external walls should also be unpacked and stored in a dark place.

The house block is installed only horizontally; therefore, the sheathing is made vertical. Several types of hardware are used to fasten boards.

The house block can be attached either to the tenon or to the front surface. The second method is rarely used - it worsens significantly appearance, the imitation of real timber is of poor quality.

Prices for a wooden block house

Wooden block house

Installation of a wooden block house with insulation

The most common cladding option façade walls buildings. It allows not only to significantly improve the appearance of the building, but also to increase its heat saving performance to regulatory standards. Cladding is used both during new construction and when renovating old buildings. The relatively light weight of the structure does not require complex measures to increase the load-bearing characteristics of the foundation; the technology can be used on all types of walls: brick, foam concrete, wood, etc.

Step 1. Purchase materials. If you have big house, then it is recommended to buy a wide block house, it looks great on it. Accordingly, for small buildings buy narrow lumber, due to this the dimensions visually increase. Calculate the area of ​​the walls; at the time of purchase, make a small reserve of up to 5–7%.

Important. Remember that the block house has two widths: general and useful. Useful width does not include tenon dimensions.

For lathing under the insulation, you need bars; the width should be the same as the thickness of the insulation.

It is better to insulate the wall with pressed or rolled mineral wool. The use of polystyrene foam is undesirable and is allowed only as a last resort when sheathing various extensions. The thickness of the insulation is at least 10 cm, otherwise its effectiveness will be insufficient.

Prices for mineral wool

The slats of the main sheathing should be the same height. The house block is fixed to a counter-lattice; slats with dimensions of 20×30 mm are suitable for it. For example, consider a house with wooden walls, we will fasten the elements with self-tapping screws or nails of the appropriate length. To fix the house block, small finishing nails, approximately 2 cm long, are also used. Finishing nails differ from ordinary nails in having a small head and the presence of an anti-corrosion coating. There are options for making finishing nails from stainless alloys.

Mineral wool must be protected from building evaporation (if the walls are wooden), for this purpose vapor-protective non-woven materials are used.

Step 2. Soak the lumber with antiseptics.

If you want to additionally paint the boards, then it is better to do this even before you start upholstering the walls. Sometimes the corners and slopes of the house are sheathed with boards of a darker color - these should also be painted before starting work.

Use only high-quality paints or varnishes on wood for exterior use. Repainting buildings takes a very long time; a lot of time is spent on removing the old layer. It is much more profitable to immediately buy, albeit expensive, high-quality materials.

The block house should be processed three times. Prime the first time, paint the second time and after installation process the third time. A varnished block house looks very nice; it is better to use these materials.

Step 3. Cover the wall with vapor barrier. The material is sold in rolls. Start fixing it from the bottom up, the overlap is at least 10 cm. You can fasten it with a stapler. Be sure to seal the seams with special or ordinary tape. Make sure there are no folds or sagging on the surface.

Practical advice. If you are not sure about the weather, then do not sheathe the entire house at once, but rather each wall in turn. This will reduce the risk of surfaces getting wet during sheathing.

Step 4. Install the frame under the insulation. There are some nuances here. The fact is that in the future a counter-lattice will be fixed to this main lathing directly under the house block. This means that the distance between vertical posts should not exceed 60 cm, take this parameter into account when choosing insulation. Most manufacturers produce products in these sizes.

Pay great attention to the frame around window and door openings. In these places you will have to fix extra slats under the insulation with the expectation that they will be useful during the creation of the counter-lattice.

The first frame must be accurately aligned vertically. How it's done?

1. Check the position of the walls with a plumb line. Unscrupulous builders may overwhelm them a little; if such a problem is discovered, then the plane will have to be leveled by using pads under the slats. Or vice versa, in some places squeeze them into a cone.
2. At a distance of no more than 10 cm from the corners, secure the outer slats and check their horizontalness again. We recommend using a plumb line; the level at a high altitude at home can make noticeable errors. Stretch ropes between them at the top and bottom.
3. Make markings for the remaining slats. We have already mentioned that you need to take into account the size of the glass wool and the permissible distances for attaching the house block.
4. Fix the slats to the wall one at a time. First, place it against the wall, if necessary, reduce the thickness. Next you should proceed depending on the wall, everything is fine - fix it, if there are problems - level the slats with pads. Using this algorithm, assemble the entire sheathing under the insulation.

It is easier to install the frame on metal corners; special slots allow you to accurately install the elements vertically.

Step 5. Replace the glass wool. It must fit tightly between the sheathing slats; gaps are strictly not allowed. And not only due to the fact that the heat saving indicator will decrease. Where there is no glass wool, condensation will constantly accumulate. Consequently - wooden structures wet, even the most effective impregnations will not be able to long time protect them from damage. In addition, moisture will get on the glass wool and increase the thermal conductivity significantly.

To fasten glass wool, you need to use special pressure cuffs (rondoles). They have a wide polyethylene cuff and a self-tapping screw.

There are recommendations to cover the front surface with wind protection. Although none of the real professionals can say why to do this and what positive effect will ultimately result. The insulation is perfectly protected from wind and rain by cladding the block house. But if you want, buy wind protection and staple it to the slats.

At this point, the insulation work is completed; begin cladding the external walls of the house. For a long time further work do not delay, if rain is expected, cover the surfaces securely with plastic wrap.

Prices for different types of bars

Block house wall cladding

Step 1. Install counter battens on the first main batten. This is now easy to do; all the sheathing slats are in the right position. We have already mentioned that 20x30 mm slats can be used for the counter-lattice.

Step 2. Hit the first row line. This is very important point, mistakes made are difficult to correct. Especially if you make corners in a professional way. About methods of finishing interior and external corners we'll tell you a little below. The line can be made laser level. If it is not there, then use an ordinary water one. It is much easier to work with, and the possibility of error is completely eliminated.

Step 3. Along the bottom line, cut off the protruding ends of the sheathing.

Important. When you seal the lower and upper parts of the cladding, be sure to leave vents for natural ventilation designs.

Step 4. Place the first board exactly along the line and secure it with nails. They will have to be driven in on both sides of the house block. The bottom is in a groove, and the top is a tenon. Drive the nails in at an angle, work carefully, do not allow the tenon or groove to chip.

Step 5. After the first row is done, continue laying in the same way. Often the length of the wall exceeds the length of the house block. How to deal with joints? There are two options.

1. Simplest. Place the joints on the same vertical line. At the ends of the board, nails can be driven into the front surface; their length should be 2 cm greater than the thickness of the boards. Subsequently, it is nailed to the joint vertical board approximately 20 mm thick and 10–15 cm wide. It can be varnished or painted in a dark color. All corners of the building, platbands and slopes are finished with the same boards. Advantages: work is simplified and accelerated. There is no need to precisely adjust each joint or measure the dimensions of individual pieces of the block house. Disadvantages - it is clear that the work was not done by a real master.
2. The hard way. The joints should not be placed on the same line, but in a checkerboard pattern. The house becomes much more attractive, but you will also have to work longer: all the cuts must be perfectly adjusted, each piece of the house block is individually adjusted in length.

House after installation of a block house

Now we should talk separately about the finishing of external and internal corners. There are also two methods here. Simple - the block house is fitted end-to-end, and the corners are filled with ordinary planed boards. It works quickly, no skill required. The disadvantage is that it is not very beautiful, and to put it mildly, the façade walls only vaguely resemble natural timber. The question is, why buy an expensive block house only to end up ruining the appearance of the building? We will tell you what real professional builders do.

Finishing internal corners

We immediately warn you that you will have to lose a lot of time, but the result will please you.

Step 1. Install the boards on one wall of the inner corner along the entire height. Constantly monitor their position. If in simple ways It is possible to level the horizontal position due to a slight displacement of the block house at the connection points, but this option requires special precision in the execution of all work.

Step 2. Make a template. It is made from pieces thin plywood, fiberboard or thick cardboard. The length of the template should be equal to the width of the block house, the width of the template is within 10 cm. Cut a rectangle of the correct shape from a piece, place it at the end of two boards so that the line of symmetry of the template is located exactly at the junction of the boards. Using a pencil, draw the profiles of the front parts of the block house on the surface. The end result should be something similar to the letter M.

Step 3. Turn the board over with the convex face down and place the template on a flat surface. back side and copy the outline. Make sure that the sharp protrusion is located exactly in the middle of the board.

Step 4. Electric jigsaw carefully cut out the outline. The front side of the block house is semicircular, making it quite difficult to hold the board motionless. Can be done special device with a recess along the radius of the board; if you don’t want to do this, then use various available materials to fix the position of the board.

Step 5. Place the board at the location of the upcoming joint. It will not be possible to adjust the connection the first time; you will have to do this in two stages. If you cut the profile for the template correctly, then the gaps in the connection will not exceed 3–4 mm, but they should also be eliminated.

Step 6. Insert the prepared workpiece and tenon, move it until it stops against the sheathed surface of the wall.

Step 7 Using a sharp pencil, draw a new, more precise outline. To do this, the pencil must be pressed along its entire length to the front part of the profile and slowly moved along the surface of the two block houses. The point of the pencil at this time should draw a line on the workpiece. With this simple operation it will be possible to remove exact dimensions for adjusting the internal corner.

Step 8 Place the board on a level place again and hold it steady. Using an electric surface grinder, remove excess parts from the end of the block house. It is not difficult to operate the grinder, but it is noisy and dusty.

Using fine sandpaper, remove any hangnails from the front side. You can take the exact dimensions of the boards along the length only after adjusting the joint in the corner, do not forget about this. Practice shows that already at the 5th or 6th connection, experience appears, and work goes faster. You need to remember that you need to buy materials for such cladding. famous manufacturers. The thickness, radius of the convexity and width of the boards should be the same. Unfortunately, not all woodworking companies can ensure compliance high requirements by quality.

That's all, we assure you that the connection will be perfect. Of course, it will take much more time.

Important. Be sure to re-impregnate the ends of the fitted boards with antiseptics. This applies to all cutting cases, not just corners.

Finishing external corners

The preliminary requirements for cladding the house are the same - ideal accuracy of the position of the rows. If for the internal corners of the plane the connection of the house block on the adjacent walls occurs along the line of symmetry of the board, then the position of the locks for the external ones should be at the same level.

The connection is made by sawing the ends at an angle of 45°. Depending on the parameters of the façade walls, this angle may slightly increase or decrease. There is no need to measure very precisely. There may be a gap on the back side at the junction, the main thing is that it is not on the front side. Then everything remains unchanged - remove burrs and protect the ends from rot.

The corners are joined at 45°

We recommend this professional method connections in the corners must be used during finishing interior spaces Houses. If the outside is allowed to use multi-colored boards for covering simple connections, then designers prohibit their use during interior decoration.

Wooden, natural Decoration Materials will forever remain relevant, even if many more years pass and innovative developers come up with something new, not real, but wood is wood, it is beautiful in all respects and the only material that can rid its residents of excess moisture by absorbing it into ourselves, thereby preserving our health and indoor microclimate.

Such products can safely include the finishing of a block house, which is made made from solid wood, has a smooth and even surface, completely retains the appearance of a rounded log, but in technology and quality exceeds the functional properties ordinary material, more practical, convenient and long-term to use.

LesoBirzha invites you to familiarize yourself with the finishing of a block house and see photos of houses outside, on the company blog. Here you can choose inexpensive, but such interesting options finishing of buildings with a block house: facades, interior walls, arrangement of locker rooms and relaxation rooms in baths and saunas, many advantages for using this particular material.

Block house exterior:

Decorating the block house from the outside, photos are provided below, it really is something to look at and something to be proud of! The company's specialists see no reason for refusing to use a block house in the exterior - designing the appearance of the building. Look at the magnificent facades of houses from the house block, photos of finished objects of private property, their variety of shades, harmoniously selected tones, as well as the ability to combine and decorate with other panels.

Photo 1. Pine block house from the outside

Photo 2. Block house 240x45 mm under glaze paint

Photo 3. Decorating the outside of a wooden house with a pine block house

Using a block house in the exterior is financial profitable solution for finishing the house outside and inside, which allows you to create reliable design, to protect the walls of the building.

Houses clad with a block house, photos (although not all of them are ours), delight with their colors, aesthetics, beauty, functionality, they cannot be distinguished from a simple log.

Professional painting a house block in a specially equipped workshop is a guarantee of long service life for your façade.

Photo 4. Oil painting on pine

Advantages of a block house:

• natural material, strong, resistant to aggressive factors;


• easy installation, tongue and groove fastening;


• allows you to create the effect of “breathing” surfaces, self-regulation of humidity;


• used in production conifers pine, spruce, larch, cedar, contain resins in the wood, and these are antiseptics from nature itself;


• affordable price and this is not unimportant.

An excellent confirmation of the use of panels is frame house from block house. Such houses are gaining popularity due to their very fast construction, simplicity and very low price.

Block house siding You can attach it directly to the wall or to a wooden sheathing; if you plan to line the walls with insulation. The laid insulation will protect the house from wind penetration and help create comfortable conditions to live in it.

The pediment is the most top part facade, is limited on the sides by the roof, and the bottom passes over the cornice or ceiling from the attic, and its shape depends on the type of roof. This is a room that, if desired, can be beautifully decorated as game room, office, bedroom, whatever you want. A balcony is attached to it and a window is opened. Producing finishing the gable of a block house, You relieve your home's foundation from a lot of stress and create the appearance of an all-log home.

Look at the photos of houses covered with block house siding. Sheathing in horizontal directions only. Ideal appearance of the surface of the sides of the building.

Photo 5. Decorating the house with a pine block house

Photo 6. House covered with block house siding

Photo 7. Siding from a block house, grade AB

Photo 8. A house sheathed on the outside with a block house

Construction finishing block house allows you to create houses that are different from each other, unique and inimitable in their appearance. This is, of course, facilitated by the available board sizes for any type of finish from 2, 3, 4, 6 meters in length.

The houses covered with block houses, the photo in front of you, amaze with the brightness of the painting and the individuality of the design. No two buildings are alike! And this is very pleasing and excites the imagination.

Order finishing from the LesoBirzha company, quality and deadlines are guaranteed. We will paint the panels in the production workshop using a specially developed system, saving you money on further repairs and extending the life of the block house finish many times over.

An online store is open only for you, look, choose, place your orders and don’t think about how to bring the material, that’s why we exist - “LesoBirzha”.

Houses covered with block houses, photos of the works of our craftsmen are the pride of the owners of the buildings and warm reviews about our work.

Photo 9. Decorating a house block from AB grade pine

Photo 10. Finishing block house 240x45 mm from pine grade AB

Friends, if you want to have a stylish, neat and inexpensive house, then finishing the facade with a block house is suitable for you - a material with a fairly affordable price, reliable, durable, safe to use, and when applying additional protective equipment for wooden products, such panels will last a long time and will delight their owners.

As you have already seen from the photos of houses covered with block houses, this a great way to decorate the facade, changing the environment, diversifying the walls indoors, changing life for the better, because only beauty will save the world.

We wish you well-being and prosperity.

Thank you for your choice, always there LesoBirzha company.

Eco-friendly houses from natural materials have become very popular in recent decades. Traditional ones remain one of the most common wooden buildings. Such structures are suitable as summer country house or capital cottage for year-round residence, and for small office buildings.

And enthusiasts argue that it is worth using a practical block house.

Why wooden houses often need cladding

Houses made of any wooden building material have long been a priority among citizens. The sales leaders in this segment remain profiled or laminated timber and rounded logs. Such materials are already dried, equipped with cuts, connecting elements, and are maximally prepared for the construction of reliable walls.

Supporters of naturalism prefer to use traditional logs, which require a long period of shrinkage of the structure - with this method flaws in the workpiece will always be visible. In this case, covering the house with a block house is recommended no earlier than a year or two after completion of construction.

The walls of self-built houses often have visible defects or require additional insulation, since the climate of most regions of the country is very unstable. A completely reasonable step would be cladding wooden structure from the outside, which does not reduce the usable space of the premises and gives the building a special charm. External wall finishing is required for frame houses- this method will allow you to create cozy atmosphere inside the building and improve its appearance from the outside.

A separate category are capital old buildings that lose their visual appeal and become less comfortable. Additional presentable wall protection will extend the life of the house: protect against precipitation, mechanical damage. The insulation is laid outside and combined with a hydrobarrier, and the surface of the old wood is cleaned of paint, varnishes, and coated with antiseptic compounds. Careful owners can carry out all the work with their own hands.

Block house: advantages, species diversity and selection rules

Block house is considered the most successful and presentable type of lining. Its environmental friendliness is undeniable. Most often, the starting material for panels is coniferous wood. Many consumers are attracted by the ability of lamellas long years secrete phytoncides that suppress the development of bacteria.

Strength, excellent insulating properties combined with maintaining natural air exchange are arguments that can be decisive when choosing a facing material. Also important is the ease of installation of the structure - any craftsman can do it with his own hands - and the absence of “wet” work.

Professionals note that a pine house block is indispensable for the external cladding of the walls of a residential building, but for saunas and baths, dense panels made of hardwood would be a rational choice. In order to choose the optimal grade and not be disappointed in the material, you need to decide on the price category before starting purchases:

• Class A - an elite block house of excellent quality without the slightest error. It remains the most expensive and very presentable.
• Class B - implies the presence of minor knots - up to 3 cm - on the front side, which, if properly positioned, can even decorate the facade. Small chips are acceptable on the back side.
• Class B - the number of knots and their configuration are not regulated.

The type of wall material is selected depending on the purpose of the building and the aesthetic preferences of each person. If you plan to build a house with your own hands, then independent choice lamels, it is worth carefully inspecting each segment and putting aside specimens with cracks or mold deposits.

Craftsmen draw the attention of beginners to special nuances: the closer the lines of annual rings are to each other, the stronger and denser the wood. Exterior cladding of a building with a blockhouse involves a wider modification of the board - about 150 mm.

Sheathing a house with a block house is done on a prepared frame, which is easy to build with your own hands from slats or regular boards. A similar lathing is located along the walls in increments of 500-700 mm. And the resulting gap is perfect for laying insulating materials. The layer thickness is calculated depending on the region. For example: in winter the thermometer shows from -8 to -12 o, which means a five-centimeter thickness of the material is enough.

If you plan to use mineral wool, then the step is selected in proportion to the existing slabs. And in front of the panels of the block house there is a layer of wind protection. Any type of waterproofing will extend the life of the base material.

To do the work yourself, you will need a screwdriver, which can be replaced a regular drill. A square, saw or grinder with a set of discs will also come in handy.

When constructing the frame, plumb lines and levels are used - the slats must be installed strictly vertically. Only in this case will the cladding have the correct geometric shapes. If class B or C samples are available, then before work you need to carefully inspect them and plan the location of the panels. Defects should be masked with special putty. Any house block is treated with impregnations.

It is important to correctly cut the material, carefully measuring all the parameters of the walls with your own hands, taking into account the presence of door and window openings.

To cover the external walls of a wooden building, the block house is laid horizontally. The spikes should be located on top: this way they will protect the grooves from rainwater. The sealed tongue-and-groove connection ensures the tightness of the structure.

Experienced craftsmen prefer to construct corners by perfectly sawing the lamellas at an angle of 45 degrees. And for those who do such work with their own hands for the first time, it is worth using a decorative outer corner. To improve the joints near a window or door, you need to purchase cash strips.

To attach a wide block to the frame, clamps and screws are used: holes are carefully drilled in the panels, which are then masked using selected putty or closed with special plugs.

The final stage is the application of varnish or paint to the block house. Renewal of the coating must be done every 5-7 years.