Laminated chipboard or mdf which is better. MDF or chipboard: which is better - comparison of material characteristics

Which is better: MDF or chipboard for the kitchen? In order to understand this issue, you should compare both materials.

Laminated chipboard is made by pressing wood chips and synthetic glue under high pressure. These boards are covered with a laminate on both sides to prevent delamination. Laminated chipboard is a good material for furniture production.

A wide selection of colors and patterns, easy processing and reasonable price make this material quite popular. Facade lamination can be matte, semi-matte or glossy.

MDF - a board made from crushed wood dust and organic compounds. MDF is a base material that is used in the production of furniture and interior elements (plinths, decorative wall panels, moldings). MDF is also the basis for production interior doors. The surface of the slab is covered with a special film or pasted over with artificial or natural veneer.

Types of kitchen finishing made from MDF

MDF panels can have different finishes, and this affects the strength, quality and appearance of the board. As a rule, there are three main finishing methods:

• Lamination with special film. The surface is covered with PVC film. This protects the board from moisture. Thanks to this, MDF is a pretty good material for kitchen furniture.
• Veneer cladding. A thin layer is glued to the surface natural wood(that is, veneer). Furniture with such finishing is decorative and looks natural. Unfortunately, veneer is quite soft and not very resistant to damage, so it requires careful care.
• Varnish coating. A layer of varnish is applied to the facade, which forms a moisture-resistant protective covering, gives the product heat resistance. Unfortunately, this coating has its drawbacks. Fingerprints and even stains from water drops remain on the plate.

Advantages of MDF:

MDF is widely used in the production of kitchen furniture due to its many advantages:

• Easy to process. The most complex and unusual shapes can be made from MDF.
• Made from environmentally friendly raw materials and completely safe for humans.
• Easy to clean. This is important, especially for a room like the kitchen. The material has a smooth, non-porous surface, so it not only does not absorb dirt, but is also easy to clean with special products.
• Boards of this type, especially varnished ones, are resistant to grease. They are not stained by acids or chemicals, so they can be successfully used in the kitchen.
• The countless colors, patterns and finishes available mean there is something for everyone in their dream kitchen. It is also possible to make the furniture matte, semi-matte or glossy. The surface can be completely adapted to any style of kitchen.
• Attractive price compared to natural wood. Furniture made from MDF is available to almost everyone.

Disadvantages of using MDF

Unfortunately, like any material, MDF also has some disadvantages:

• Low resistance to water and moisture. Edges not protected by acrylic or metal strips are especially susceptible to this. They quickly absorb moisture, swell and deform over time.
• Susceptibility to scratches. In most cases this applies to varnished surfaces. It is not recommended to use products containing abrasives for cleaning.
• With constant exposure to steam, a surface made of MDF may become matte and, as a result, slightly discolored.
• When a scratch appears on the facade, it is difficult to select paint and paint over only the damaged area. We have to completely repaint the entire surface.
• Over time, the material loses its strength and elasticity. The fittings and doors of the kitchen furniture begin to loosen.

Features of MDF countertops

• Resistant to high temperatures - you can place a pot of boiling water on them.
• When exposed to light, the color of the surface does not change.
• Furniture on which the film is correctly installed does not absorb water vapor and water, and the material does not delaminate over time.
• Resistant to soft household chemicals detergents, as well as stains of milk, coffee, tea, wine - they are not absorbed due to lamination.
• Quite resistant to scratches and dents.
• May fade due to direct exposure to steam.

These features apply to work surface countertops. You should know that if you install appliances under the countertops, sheet metal or plastic must be additionally secured to the underside, which will create additional strengthening of the structure.

Laminated chipboard - main advantages and disadvantages

The laminated chipboard material in kitchen production is easy to process and maintain the basic physical and mechanical parameters. The main advantages include:

• The laminated chipboard tabletop is quite strong and durable.
• The material is scratch resistant. Dirt can be cleaned with household chemicals.
• Modern technologies in the production of laminated particle boards ensure the production of furniture various forms and any colors you like.

Concerning negative aspects, then I would like to note the following. When purchasing laminated chipboard, pay attention to the E1 or E2 icons. The E1 marking on a product means that 10 grams of formaldehyde were used per 100 grams of wood chips during the production process. If E2 is indicated on the chipboard, then the amount of formaldehyde can reach 30 grams. Perhaps the presence of a toxic substance in the composition is the most important disadvantage of laminated chipboard.

Comparison of kitchen furniture

To specifically decide on the material for kitchen furniture, you need to understand what is better - laminated chipboard or MDF kitchen, and what is the difference? It is equally important to study their advantages and understand their disadvantages.

What will last longer, MDF or laminated chipboard?

One of the most important criteria when choosing furniture is durability. This is something to consider so you don't have to replace your cabinets and countertops every two or three years. It is important to decide whether the kitchen façade will be made of chipboard or MDF.

Furniture made from MDF can boast good durability. Obviously, a product made from laminated chipboard will lose its attractive appearance a little faster. The durability of a modular kitchen made of MDF is one of the positive features of this furniture. All thanks to the fact that the composition of the material is almost natural and environmentally friendly. In addition, if properly cared for, the equipment will last for many years.

Chipboard or MDF: which resists scratches better?

Another very important feature furniture is its resistance to mechanical damage. Furniture made from MDF is resistant to impact external factors such as physical wear, high temperature and greasy spots. The situation is worse in the case of steam or water - they damage the MDF structure. For laminated chipboard surfaces, humidity and high temperatures are not dangerous.

The next feature is that furniture components made from chipboard and MDF break in approximately the same way. In case of resistance to mechanical damage, for example, scratches, chipboard holds the lead. This material is resistant to many household chemicals.

Environmental friendliness

An important aspect is the comparison of laminated chipboard and MDF in terms of the content of harmful substances in their composition. The latter negatively affect human life.

Furniture made from chipboard is produced using formaldehyde. This substance is used as a binding element. Although the products are divided into classes E1 and E2, and in the first version less toxic substances were used, furniture made from chipboard is toxic, and this adversely affects health.

In MDF, the composition of the board is close to natural wood and does not have any negative impact per person. However, in terms of cost, a countertop made of laminated chipboard is cheaper than a product made of MDF.

Aesthetic value

Which is better: MDF or LSPD for the kitchen? The attractive appearance of the furniture is another main feature, which is very important when purchasing. Much depends on the client’s desires, needs and financial capabilities. It's quite easy to impress guests by installing it in your home. beautiful kitchen. Available on the market big choice colors and patterns, so there is no problem finding something that really suits your taste. If you want a kitchen with a rounded shape or with stained glass, then give your preference to MDF. Chipboard is not so plastic material, and it cannot take such shapes. However, the color range is much wider and more varied for furniture made from chipboard.

Choosing the right material from which yours will be made kitchen furniture, It has great importance. The type determines the character of the furniture, and as a result, the style of the interior is created. After reading, it’s easy to determine which is better, MDF or laminated chipboard for the kitchen.

Having analyzed all the main features of MDF and laminated chipboard, as well as the disadvantages and advantages of each material, we can say that the most environmentally friendly and durable material is MDF. However, as for the variety of colors, laminated chipboard furniture can be made in almost any color. If we consider the prices of furniture, then a kitchen made of laminated chipboard will be more affordable. Final decision on the question of which is better, MDF or chipboard for the kitchen, will depend only on your choice.

Market building materials offers the consumer a very large range of products, which are quite difficult to understand without certain skills. However, materials made on the basis of natural wood - MDF and its laminated chipboard version - are indispensable when carrying out repair and construction work. Despite some similarities, the materials have significant differences.

Definition

MDF– a finely dispersed fraction of wood, or to be more precise, it is a slab made from wood fiber by drying, followed by hot pressing. It is worth noting that wood fibers are treated with special binders before pressing. For this purpose, natural products lignin and paraffin are used, which do not emit harmful substances.

MDF panel

laminated chipboard is a representative of a series of wood-based chipboards chipboards, more precisely, this is polished chipboard. The main difference between laminated chipboard and chipboard is the presence of a special facing film made from paper and melamine resin. The protective film is pressed into the chipboard structure, making it more durable and moisture resistant.

Comparison

Considering such popular building materials in comparison, we can note the fact that they have wide application, however, each of them occupies a specific niche. The main differences are presented in the table:

When considering MDF and laminated chipboard, it is necessary to pay attention to their main specifications and the scope of their application in this regard. Considering the fact that both materials are made from natural wood, it is worth noting their main area of ​​application is furniture production. Moreover, MDF is a very soft material, which is easy to process. This is highly valued in the manufacture of luxury furniture, which requires elegance and fine lines. Carved cabinets and headboards are all made of MDF.

Regarding laminated chipboard, it can be noted high degree protection from harmful influences such as high humidity and high temperature. This has made the material indispensable in the production of kitchen and bathroom furniture. Nowadays, most of the economy class cabinet furniture is made from chipboard. Particularly valuable is the fact that, thanks to the laminated chipboard film, there are many options color solutions.

Naturally, MDF and laminated chipboard are no less in demand in construction. In this regard, we can note the fact that laminated chipboard, due to its structure, perfectly holds screws and nails. The material is very effective in the manufacture of partitions, individual roofing elements, and various interior details. As for MDF, the ease of its processing has made the material indispensable for constructing ventilated facades. Partitions and roof elements are also made of MDF.

Conclusions website

1. MDF is a very soft material, which makes it indispensable in furniture production.
2. Laminated chipboard has a wide range of colors, which is widely used in the production of cabinet furniture.
3. MDF is an environmentally friendly material and has no restrictions on its use, while laminated chipboard is not recommended for use in children's and medical institutions.
4. MDF, compared to laminated chipboard, is a more expensive material, which is due to the small volumes of domestic production.

Which is better - MDF or laminated chipboard for furniture? ? — Many of us ask this question when carrying out repairs and replacements. old furniture in an apartment or private house. It is very important that the material combines environmental friendliness, high quality, and also fits elegantly into the interior of the room. Modern construction and Decoration Materials greatly facilitate the repair process. With the help of such materials, the consumer has an excellent opportunity to create durable and exclusive pieces of furniture for various purposes.

Today, laminated chipboard and MDF are in great demand in the manufacture of cabinet, kitchen and other furniture, which in some respects have properties similar to natural wood, and in some respects even surpass it. In our article we will tell you in detail Which furniture is better - MDF or laminated chipboard? , let's get acquainted with the main properties and areas of application of these materials.

What is laminated chipboard?

Almost everyone who works in the furniture industry or has dealt with the issue of repairs is familiar with the name chipboard. Chipboard began to be used for furniture production back in the period when the building materials market did not have such wide range goods. Over time, manufacturers improved their products and began to cover the stove with a special film. So chipboard received the new name LDSP. This solution to improve the material significantly increased its wear resistance and strength.

Advantages of laminated chipboards:

• A durable, durable surface that can withstand various mechanical loads and damage.
• A wide range of shades, imitation of various types of trees and other materials.
• Simple mechanical processing of plates.
• Reasonable price.

Disadvantages of the material:

• Laminated chipboard panels are not recommended for finishing or decorating bathrooms or rooms with high moisture.
• Due to the presence of large wood particles in the composition, it is very difficult to produce objects with curved contours. The panel cut will have an unpresentable appearance.
• For chipboard manufacturing use formaldehyde. Boards with a high content of this element are not suitable for use in residential premises.

Important! Formaldehyde is a volatile Chemical substance, which is very dangerous for humans. As a result of intense exposure to the substance on the human body, poisoning can occur, and in some cases, death.

• Boards with a high content of formaldehyde are used exclusively for technical purposes.

Important! Before purchasing chipboard boards, read the quality certificate and hygienic certificate of this material.

MDF furniture, what is it?

The production of MDF panels is practically no different from the production of chipboard. We can only say that the MDF board is more advanced. And to find out Which is better - MDF or laminated chipboard for furniture? , you need to understand the difference in production technology. The board is made from small particles of sawdust, carefully pressed together. This process produces products of high quality, uniform texture and strong enough for the manufacture of furniture and other items.

Advantages of MDF boards:

• The material is absolutely harmless to humans, as it is made from environmentally friendly raw materials.
• MDF can be confidently used for the manufacture of interior items for various purposes.
• Moisture-resistant, durable material.
• The homogeneous structure allows us to produce furniture elements of any complexity.
• MDF panels almost never deform during operation.
• Large assortment of shades and variety of textures.

Disadvantages of the material:

• High cost compared to chipboard.
• With mechanical damage, dents, chips and cracks easily form.
• The material is classified as flammable and may therefore be prohibited for use in some areas.

Furniture made of MDF or chipboard - which is better?

Having carefully considered all the pros and cons of these materials, we can say with confidence that each of them is perfect for making furniture or other items. Even so obvious advantages of MDF slabs will not be so important, given the significantly lower cost of chipboard. Some consumers sometimes focus on this indicator, despite the fact that more cheap option less quality and wear-resistant.

IN furniture industry MDF and laminated chipboard are excellent for production; they compete with each other. Often these two types of slabs are combined in one product, because they combine well and complement each other.

Important! When ordering furniture for your home, take into account all the factors of the product’s operation and your financial capabilities. In some situations, it will be very appropriate to combine MDF and laminated chipboard to obtain the optimal quality and price of the finished product.

Cabinet made of MDF or chipboard?

It is very difficult for a person who has never encountered these building materials to “by eye” determine what a particular piece of furniture is made of.

The only thing that can indicate the use of MDF is the exorbitant cost of furniture, although manufacturers very rarely use only MDF:

• In most cases, corrugated and shaped parts are made from MDF.
• The internal filling, shelves and partitions are made of chipboard or laminated chipboard.

Important! If you are looking for an answer to the question: what is better chipboard or laminated chipboard for a cabinet? then give preference to laminated boards. They are more durable and wear-resistant, and their appearance is a little more attractive than a regular panel.

What material should I use to make the bedroom?

First of all, to produce furniture for the bedroom, you need to choose an environmentally friendly material. A person spends most of his free time in the bedroom, so give preference to products made from MDF.

As mentioned above, for the production of chipboard they use substances that can affect human health; take this factor into account when choosing furniture for yourself. In order to reduce the cost of products, as an alternative, you can combine these two types of slabs.

Important! Before purchasing a product, be sure to read the quality certificate.

What is better - MDF or laminated chipboard for children's room furniture?

The room in which the child will be is a place where you should not experiment with the quality of the material. In this case, it is advisable to make all products from natural wood or use MDF.

When choosing any furniture for a child, you should pay attention to the following characteristics:

• Manufacturer's warranty.

Important! Some companies save on the quality of their products by adding impregnations or adhesives to the raw materials.

• If the laminated chipboard is of high quality, there are no obvious film defects on the panels, the joints and connections are well closed with an edge. Such products can also be installed in the nursery.
• Too low cost and flimsy assembly finished products- this is a sign of low-quality material. We recommend that you refuse to purchase such furniture.
• When choosing furniture, you should not focus solely on your financial capabilities.

Important! You can reduce the cost of a finished piece of furniture by installing less expensive fittings, choosing to deliver the furniture yourself or assemble the furniture yourself.

What to make a kitchen set from?

When choosing countertop drawers and other kitchen utensils, both slab options are widely used. The production of kitchen furniture also has its own nuances that are worth paying attention to:

• Laminated chipboard is a material that is afraid of moisture, so it is not used in bathrooms. For the same reason, you should not purchase a cabinet for a sink or countertop located near a water tap.
• MDF, on the contrary, is very sensitive to high temperatures, therefore, you should not place it near the hob.

If you take into account all the features of these slabs, you can safely design the placement of furniture in the kitchen, successfully combining two material options.

The use of modern finishing and building materials significantly alleviates repair problems. It also helps to choose best option to create durable and visually attractive furniture for a variety of purposes. Among good fiberboards, laminated chipboard and MDF have earned great popularity, which, according to some quality characteristics are the closest to natural wood, and in some aspects even superior to it.

Material differences

Laminated chipboard

Every home craftsman is familiar with the concept of chipboard first hand. The use of chipboard became widespread even during periods of severe shortages and a small selection of suitable building materials. Over time, they came up with the idea of ​​covering a thin and unreliable plywood board with a special layer, so to speak, laminated.

This made it possible to increase the properties of the slab tenfold and provided a second youth for similar wood-replacing materials. There is something for every taste, which is a big plus.

Advantages of laminated chipboard

• Lower cost compared to MDF.
• Easy machining.
• Large selection of colors.
• A more durable surface that is resistant to mechanical damage and moisture, for example, for floors.

Minuses

Among the disadvantages, low moisture resistance should be noted, which automatically excludes laminated chipboard from the list of possibilities for use in bathrooms, which does not apply. Making curved contours can be very difficult solely due to the larger particles in the composition, which will not allow you to get an even and clean cut.

The video explains which is better: chipboard or MDF:

It should also be taken into account that laminated chipboard is manufactured using two technologies, in which formaldehyde is used in different proportions. This volatile chemical compound is very dangerous for humans and can even lead to poisoning and death. Typically, chipboard with a high content of formaldehyde is not used in furniture production, but is used for purely technical needs. When purchasing furniture made from chipboard, it is better to familiarize yourself with the certificates and check the hygiene certificate, otherwise there is a high risk of becoming a victim of a low-quality product.

When choosing furniture for the kitchen, it is important to choose an apron and choose what material it will be from MDF or HDF, and you can read how to do this in

Bed material

Such furniture must first of all be safe, because we spend more time sleeping than in the kitchen. Therefore, it is better to prefer furniture groups made of MDF. as stated earlier, the cost of such purchases will be much higher than the average chipboard option, so this will not seem acceptable to everyone. It is also often used for the bedroom. Thus, the solution would be a partial combination of materials and a strict rule of preliminary familiarization with quality certificates before purchasing.

For children's furniture

A children's room is the least suitable for experimenting with the quality and environmental friendliness of furniture, so sympathy is entirely on the side of MDF. Despite this, there are also several pitfalls here.

You can buy children's furniture based on the following indicators:

• Guaranteed quality of MDF boards. Some manufacturers are also trying to save money and replace the original and safe impregnation composition with their own recipes.
• If the laminated chipboard sections are reliably protected with film, there are no poor-quality joints and connections, it is quite possible to purchase furniture from laminated chipboard.
• In any case, the low price and flimsy design should arouse suspicion and force one to abandon the dubious purchase.

In the video, which is better for the kitchen: MDF or chipboard:

Read about which one is suitable for a children's room.

The use of fibreboards provides ample opportunities to create beautiful and affordable furniture groups. If natural wood- an elite option that requires special care and respect. Another thing is furniture made from affordable and widespread laminated chipboard and MDF, which differ for the better not only in their affordable price, but also in their greater resistance to mechanical and thermal influences, and are also less susceptible to pests and fungi. By making a reasonable and conscious choice in favor of one material or another, you will not only save yourself from unnecessary disappointments, but also will not take risks by purchasing a low-quality or dangerous product.

Today, they are used for the production of furniture and decorative coatings. various materials– Chipboard, fibreboard, MDF, solid wood. However, more and more often manufacturers prefer to deal with laminated chipboard. At the same time, many buyers are still confused by the abbreviation LDSP: what it is, how this material differs from the varieties mentioned above, and what are its advantages and disadvantages. Answers to these questions will be provided in this article.

You can notice the similarity between the terms laminated chipboard and chipboard. The latter stands for chipboard or chipboard. The abbreviation itself, although commonly used, is not entirely correct. It would be more correct to write DSTP. It's about about a composite material, in the production of which, due to hot pressing, sawdust and shavings together with binding formaldehyde resins take on the appearance of a solid canvas.

This material was first invented back in the 30s. twentieth century, but mass production of chipboards began only in the 50s. Last but not least, this is due to the difficult post-war situation. For the needs of mass production, a cheap and available material, but natural wood was expensive and waste during its processing reached up to 60%. In addition, the tastes of buyers have changed significantly - pretentious, bulky furniture did not in any way correspond to the spirit of the era, which combined the desire for simplicity, convenience and lightness with the need to save money. Chipboards fully met all these requirements.

Chipboard production technology

For the production of chipboard, waste from the wood processing industry and specially crushed illiquid trunks are used:

• shavings and sawdust (previously they were simply burned as garbage) are dried in a special drying chamber and is driven through a cycle unit that rejects particles that are too large for re-grinding;

• the raw material that meets the requirements is mixed with formaldehyde resin and transferred to a conveyor belt, where it is given the required shape by cold pressing;
• using a hot press, the layers of the workpiece are firmly glued together, then the sheets are cooled, dried and sawn into slabs of standard sizes;

Pros and cons of chipboard

The resulting durable and very affordable material instantly found application in the manufacture of upholstered and cabinet furniture, carriages, and in construction (as formwork, partitions, beams, floors, cladding, frames). Among its advantages, one can note good thermal and sound insulation performance.

Durable and inexpensive chipboard is used as partitions, floors, sheathing, and formwork

However, chipboard also has a number of serious disadvantages. It can absorb moisture (up to a third of its original volume) and become deformed. The slab can also lose its shape under the influence of heat. This limits the possibility of using chipboard sheets in the kitchen or bathroom. The only exceptions are canvases that have passed special treatment as a result of which the material becomes moisture and fire resistant.

Due to its dense structure, chipboard holds nails and screws well. However, due to the same structural features, the fastening hardware cannot be re-attached, since the slab will begin to crumble. For the same reason, the material is not suitable for milling and creating curved contours.

And finally, the biggest drawback of chipboards is the use of urea-formaldehyde and phenol-formaldehyde resins in the manufacturing process. They prevent the processes of wood rotting, however, they do not have the most favorable effect on human health.

Note! Formaldehyde is an extremely dangerous chemical. It can accumulate in the human body, cause poisoning or provoke the development of serious diseases. The main signs of poisoning are cough, irritation of the mucous membranes of the throat and eyes, dizziness, fatigue. .

Main types of chipboard

There are several classifications of chipboard.

The amount of harmful substances in particle boards is indicated by the formaldehyde emission class E1 and E2. Class E1 is considered environmentally safer (corresponds to GOST 10632–89 adopted in Russia). Class E2 is not suitable for use in children's premises. Many European manufacturers have already stopped producing chipboards of this class.

Depending on the quality and appearance finished products Chipboard happens:

Based on the type of cladding, chipboards are distinguished:

• rough (do not have lining);
• laminated (coated with melamine film or special durable varnish);
• veneered (have a lining in the form of a thin sheet of natural wood).

To figure out which is better - chipboard or laminated chipboard, you need to familiarize yourself with the characteristics of laminated panels.

Laminated chipboard: what is it, variety of colors

So what is LDPS? In fact, it has already been mentioned above and the decoding of laminated chipboard is simple - it is a laminated chipboard. For the manufacture of laminated chipboards (more precisely, laminated chipboards), only high-quality polished chipboards are used.

At the final stage of their production, high blood pressure And high temperatures ah are covered with a special polymer film. This film is made from paper impregnated with melamine resin. Sometimes, when making expensive LSDPs, a special varnish is used that is not afraid of water and scratches.

Characteristics and main advantages of the material. Areas of use. Features and installation rules. Average cost of production.

Catalogs with samples and photos of laminated chipboards, the colors of which are represented in hundreds of shades, can demonstrate several palettes:

• plain smooth (vanilla, blue, green water);
• plain textured (aluminum, titanium, concrete);
• wood colors (maple, cherry, wenge);
• glossy decors;
• fantasy decors (various patterns and designs).

All this makes laminated chipboard sheets universal and extremely popular material. They are used in bathrooms and children's rooms to create decorative partitions, upholstered and cabinet furniture. You can easily find many positive reviews on the forums: kitchens made from chipboard can withstand the effects of steam, water and significant temperature changes.

Laminated boards combine perfectly with other materials - glass, mirrors, metal, plastic panels, as well as fiberboard and MDF.

Which is better: laminated chipboard or MDF

The variety of materials in stores cannot but puzzle shoppers. What is better for furniture - MDF or chipboard?

Between laminated chipboard and MDF there are fundamental differences. Laminated chipboard is made from wood shavings and sawdust, formaldehyde acts as a binding component.

In the production of MDF, wood dust (waste from the woodworking industry crushed to a very fine fraction) and exclusively natural binding components – paraffin and lignin – are used. Thanks to this composition, MDF is much more environmentally friendly than chipboard. They can be safely used even for decorating children's rooms.

Note! Paraffin is not only environmentally friendly, but also has water-repellent properties, so there is no need to further process the slabs MDF special impregnations.

Unlike laminated chipboard, MDF is a very plastic and soft material. It can be easily milled, which is why it is so popular in the manufacture of luxury furniture. Majority bent elements, carved headboards and intricately designed facades are made from MDF. Photos of beds made of chipboard or kitchen facades They cannot please with such decorativeness, because the furniture is made of material with a crumbling edge, unsuitable for milling.

Nevertheless, many, when choosing between laminated chipboard or MDF, prefer laminated panels. The reason is simple: the cost of MDF is much higher than affordable wood-based panels. According to consumer reviews, furniture made from laminated chipboard is successfully leading the domestic market, and not least of all, this is due to its reasonable prices.

Another strong argument in favor of laminated chipboards is the richness of color options. In the laminated chipboard catalog or on online store sites, you can choose a suitable shade or texture that will harmoniously fit into any interior style - from classic to modern.

Leading manufacturersChipboard: Egger, Kronospan, Lamarti, Nevsky Laminate

When purchasing laminated chipboard, it is very important to ensure that the product has all the necessary certificates guaranteeing the safety of the material for human health and is distinguished high quality ensuring long service life. However, ensure that at each stage of production the standards and technical regulations, only large manufacturing companies can. The leaders in the domestic market are foreign companies Egger and Kronospan, as well as domestic producers Lamarti and Nevsky Laminate.

Egger chipboard: colorsand advantages of the material

The company's head office is located in Austria. Founded in 1961 by Fritz Egger Sr., the modest family company has gradually grown to become one of the leading chipboard manufacturers in the world.

The highest quality of manufactured products, an extensive catalog of Egger chipboard colors and reasonable prices are achieved through the opening of local production facilities in 7 European countries, including Russia. First-class raw materials are mainly produced from coniferous species wood and does not include foreign elements. Laminated boards fully comply with European safety standards.

A huge variety is provided by the Egger chipboard color catalog, which allows you to realize any design solution:

• plain laminated chipboards (white, lagoon, alabaster, beige sand, canyon, pumpkin yellow, green water, Chinese red, reed, Baltic blue and dozens of other colors) – available in matte and glossy versions;

• texture decors ( lightweight concrete, beige leather, gray-white Amalvi marble, titanium, bronze quartz, indigo quartz, etc.);
• wood-effect Egger chipboard colors (pink Calvados, light Venchester oak, blooming pear, pink tree natural, Cremona champagne oak, Havana zebrawood, natural merano - more than 100 shades that perfectly imitate natural wood).

We can state a steady increase in demand for Egger chipboards. Customer reviews only confirm the positive dynamics, noting the high wear resistance of the material, excellent quality and minimal presence of formaldehyde resins (“pine smell without chemicals”).

LDSP Kronospan: high kaquality and wide range

Another Austrian company whose history began with a small family sawmill in Salzburg in 1897. Currently, its activities cover 24 countries around the world.

Among the undoubted advantages of laminated boards from this company are:

• good moisture resistance, which allows them to be used in bathrooms and kitchens;
• increased wear resistance;
• a solid catalog of colors for laminated chipboard Kronospan;
• environmental friendliness;
• antistatic, guaranteeing additional protection against dust;
• fairly democratic pricing policy;
• long service life (up to 20 years).

The colors presented in the Kronospan laminated chipboard catalog can be classified as follows:

• textures (deep pores, wood pores, office, smooth, shagreen, mother-of-pearl);
• plain (modra atoll blue, lime green, façade white, burgundy, Inca gold, lavender, viola);
• wood (Milanese walnut chipboard, snow birch, Guarneri walnut chipboard, dark corduroy, Bodega light chipboard, plank alder, rustic oak, warm Shimo ash);
• fantasy (white sakura, white imeneo, dark twist).

Even such a short overview of the colors of Kronospan laminated chipboard gives a good idea of ​​how rich their palette is and how varied the textures are. Actually, a surprisingly believable imitation of the rough surface of natural wood is a unique business card many lines of chipboard from this Austrian company.

Lamarti: characteristicsChipboard, colors, photos with names

Thanks to strict quality control at every stage of production laminated chipboard from the Syktyvkar plywood plant successfully compete in Russian market with products of foreign companies. The particle boards of this company are made from high-quality raw materials (coniferous and birch wood without foreign inclusions such as bark), have an environmental certificate and excellent technical characteristics.

They are wear-resistant, resistant to steam, moisture and high temperatures, environmentally friendly, durable and retain their original color for a long time, and Lamarti’s impressive color catalogs of laminated chipboards will allow you to bring any design idea to life.

The Lamarti chipboard color catalog includes:

• solid colors (topaz, chili, serenity, coral, monsoon, lemon, sepia);
• texture decors (slate, titanium, chinon, aluminum, exotic pine concrete);

• wood imitation (plum, Marsala oak, light wenge chipboard, latte, bamboo, noche amati, bleached oak, elm, Italian walnut chipboard);
• fantasy colors of Lamarti chipboard (linen, spring, arabica flowers, modern, luino, graffiti).

LDSP Nevsky Laminate: affordable price, European quality

Laminated sheets from the Nevsky Laminate Plant compare favorably with foreign analogues due to their low cost. At the same time, they have all the necessary quality certificates and good environmental characteristics. Laminated chipboards from this manufacturer hold fasteners well, are not afraid of moisture, are resistant to mechanical damage and have a long service life.

The Nevsky Laminate chipboard color catalog offers customers a large selection of shades and textures:

• plain (orange, lime, anthracite, yellow daffodil, red wine, dark chocolate, white pearl);
• textured (linen, titanium, aluminum);
• fantasy decors (litera nero, Newport, Sena, titanium, flora verde, mocha stitch);
• wood decors (shimo ash light chipboard, light Indian ebony chipboard, French oak, Macassar, Swiss elm, jarrah, canterberry oak, caramel).

Regardless of whether the boards are produced in Europe or in Russia, laminated chipboards will be an excellent choice for many years to come due to the optimal combination of price and quality.