How to close radiator pipes in the kitchen. How to hide batteries in a room - simple and original ideas

Fits beautifully into new interior A heating radiator is a rarity. Batteries, especially old cast iron ones, stand out sharply against the background of fresh wallpaper and look ridiculous in a room if its design is not made in a retro style. Think about how and what to close heating batteries, it is necessary at the stage of planning the repair, and not after its completion, when some work can no longer be carried out.

Installation of new radiators

Owners of apartments in houses old building most often they are faced with the fact that rooms have installed cast iron batteries. For efficient heat transfer, such a device is better. However, over the years of operation during the Soviet era, in conditions of shortage of materials of any kind, the only manipulations that were performed on the radiators were painting. Turning a monster covered in many layers of peeling paint into something decent is extremely difficult. In addition, at cast iron radiators not provided Ball Valves, which allow you to turn off the radiators if it is hot in the apartment.

The easiest way is to replace the radiator on modern model and immediately install shut-off valves, which can be used to reduce the temperature in the room and shut off the water for repairs.

For the new radiator to work effectively, during installation you need calculate accurately place of its attachment:

• The heating radiator must be placed strictly in the middle of the window opening.
• The distance from the floor to the bottom edge of the battery should be within the range of 8–14 cm.
• The radiator should hang 10–12 cm below the window sill.
• The gap between the wall and back wall should not be less than 3 and more than 5 cm.

If these rules are followed, heat transfer will be maximum.

It's hot in the apartment

Complaints about heat in the apartment quite rare. Usually the temperature of radiators is regulated shut-off valves, but they are not always installed. Therefore, if you need to reduce the heat transfer of a battery without taps, this can be done in several ways:

• A budget option is to cover the battery with a thick cloth or blanket. This method allows you to solve the problem of “overheating” here and now, until it is purchased special screen for the radiator.
• Another “quick” option to reduce the temperature is to cover the radiator with a shield made from a tabletop or board.
• A more expensive option is reflective insulation. As a rule, this is foil on a backing made of gas-foamed polyethylene foam, which is used to cover or wrap sections of a radiator that is too hot.
• If you want it to be not only cool, but also beautiful, the battery needs to be packed in a box made of wood, metal or plasterboard. The construction of the box will require not only financial costs, but also time.

If the room is cold

Much more often people complain that There is not enough heat from the radiators to warm up the room. To make the radiators warmer in the apartment, you can also use reflective thermal insulation, only in this case it must be mounted on the wall behind the radiator and on the floor below it. Other methods are more complex:

• It is advisable to install it on the battery Mayevsky crane, which allows air accumulated during the start to be released heating season and when filling the radiator with water.
• Thorough removal of dust and dirt will improve heat distribution. You need to clean not only on the outer and upper sides of the radiator, but also in the space between the sections.
• In the battery itself, in addition to air, there may be dirt accumulate and rust. To clean the batteries you need to call a technician.

Ways to disguise radiators

If the temperature in the apartment is completely satisfactory, but only worries appearance batteries, then you can use one of the decoration methods. The main thing is not to harm the heat transfer process and observe several important points:

• The radiator may require repair or replacement, so you need to consider decorative design so that in the event of an accident the battery can be easily removed. Plumbers who regularly encounter problems with heating devices generally recommend using only attached screens that simply slide to the side.
• The main threat from a radiator is a possible leak at the junction with the heating pipes. Therefore the second important nuance- accessibility of connection nodes, which can be ensured by providing a plastic door in box designs.

Using wallpaper

Typical heating radiators are painted in White color and look good only against white walls. If the walls are dark in color but without a pattern, the radiators can simply be repainted. Only heat-resistant paint can be used.

Drawing on the walls complicates the task. Using a stencil and paint, it’s easy to duplicate a simple pattern on a battery. If the pattern is complex, you can cut pieces from the leftover wallpaper that match the size of the sections and stick them on the radiator.

A special way to decorate a battery is decoupage. Craft materials stores sell vinyl based stickers, which do not deform under the influence of temperature. For decoupage, you can use not only ready-made patterns, but also create your own from scrap materials: fabric, paper, hot melt glue and even beads.

Fabric screen

Women with good sewing skills often make their own fabric radiator covers.

An alternative way to decorate is to create a special curtain for the battery. They are made of loose fabric and attached to the wall or window sill using textile Velcro. Most often, a fabric screen is made from the same material as curtains.

The undoubted advantage of such screens: minimal impact for heat transfer and basic care - the battery curtain, which has collected all the dust, can be effortlessly cleaned when washed in a regular washing machine.

Mounted and attached structures

For lovers of ready-made solutions, construction and furniture stores offer screens made of various materials. The variety of choices allows you to choose a design that will fit perfectly into any interior. The most popular screens are made of metal and wood:

• Metal decorative screens are made from of stainless steel. Chrome structures fit well into a stylish high-tech interior. The main advantage of metal decor is high thermal conductivity, easy care and wear resistance.
• Wooden screens are suitable for American or Scandinavian style. Most often, wooden screens are made in the form of a large-mesh lattice, which does not interfere with the normal convection of the battery.
• The decorative glass screen looks very elegant, and the design itself takes on an airy lightness. But decorating with solid glass reduces heat transfer by almost half, more effective method- use a screen made of several glass panels.
• Drywall screens are also very common because you can make them yourself. It must be remembered that the thermal conductivity of drywall is very low, and the material itself begins to deteriorate under the influence of high temperatures. Therefore, it is better to choose fire-resistant drywall and treat the sheets with a primer or PVA glue.

Camouflage boxes

More difficult to perform decor option- a box covering the radiator on all sides.

Most often, boxes are made from the following materials:

• Heat-resistant plasterboard - inexpensive material, which is on finishing stage painted, covered with wallpaper or film, decorated with decorative elements and even stucco.
• MDF panels are also inexpensive and successfully imitate rare wood species. The panels are selected to match the color of the main furniture.
• Plywood, like drywall, is very often used for self-production boxes, and at the final stage it is decorated with various materials.
• Wood is used as a material for the box due to its high environmental friendliness, but it is more expensive and difficult to process.
• Plastic, although it is used as part of the box structure, is not particularly popular. When heated, plastic elements can release toxic fumes.

The box is often made not in the form of a simple box, but as interior items: an imitation of a fireplace, a false wall, or a section of a cabinet built under a window.

Hidden battery installation

One of the most difficult decorating methods is to hide radiators as if they were not installed:

• Installing pipes and batteries in the wall radically solves the problem of the appearance of heating devices. In this case, thermal conductivity invariably suffers, and in the event of a leak or breakage of the radiator, you will have to break the wall.
• In the bathroom and kitchen, you can successfully cover the heating elements with furniture. In the bathroom, cabinets are most often used, small kitchens the window sill is replaced with a tabletop, and false cabinets with lattice doors are installed under it.

Radical method

You can completely discard batteries by replacing them alternative systems heating:

• Warm floor. Electric and infrared floors are most often installed in apartments, but in a cottage this can also be water system. The point here is not efficiency, but the fact that it is impossible to obtain permission to install a water floor in an apartment. The disadvantages of heated floors include:
  • a large number of building materials that need to be purchased and installed - pipes, pump, mixing unit.
  • Heat transfer losses due to floor coverings(carpets) and furniture.
  • High accident rate of the system: laminate (or parquet) laid on top of a heated floor can catch fire; the water system, like conventional batteries, has a risk of leaking.
  • Difficult to regulate heating temperature.
• Film electric heaters. They belong to infrared heat devices and work by flowing electricity through resistive elements, the heat from which is transferred to an aluminum screen. Film heaters are good because they can be mounted as decoration in any part of the room: floor, ceiling or walls, or stylized as a painting, for example. The advantages include durability (up to 50 years of operation), absence of combustion products, noiselessness, ease of installation and low weight of the structure. Among the negative features of this heating method, it should be noted that it is effective only in rooms with good thermal insulation, it requires high power supply, and its operating costs are higher than that of gas equipment.

Heating saves our apartments and cottages on frosty winter days. Therefore, the presence of heating radiators in homes is undoubtedly a plus. But often batteries become a stumbling block when you want to decorate a room beautifully.

The radiators and heating pipes themselves in houses are located either under the windows or along one of the walls, that is, they stand out strongly. These massive elements spoil general form rooms, therefore both designers and ordinary people They often think about how to close the radiator.

The problem with the design of heating radiators is especially relevant in children's rooms and rooms where children often play, and not only for aesthetic reasons, since they can run and hit the radiator.

If modern radiators have an appearance that can easily fit into a room in a high-tech or minimalist style, then old Soviet cast-iron radiators look completely depressing. Therefore, we need to take care of how to disguise the battery, and in such a way that it does not stop warming us in the cold.

Common methods of disguise

The presence of any problem always leads to its solution, and masking heating radiators in apartments is no exception. Designers and builders have developed several solutions to this problem. Let's look at the most popular of them:

– One of the most common ways to solve the problem of closing a heating radiator is to install a metal screen. These screens are usually mass produced, but are produced for specific types of radiators. Their advantage is high heat transfer, durability, absence of the slightest deformation under temperature influences, as well as low price. But the minus probably outweighs all the advantages of this type of disguise, since this one can hardly be called beautiful.

You can solve the issue of the aesthetic component after purchasing such a screen: decorating or painting a metal screen yourself is quite feasible for creative people.

– Another method to disguise a battery indoors is to install a wooden screen. A custom wood craftsman can make such a model, masking a radiator in the house. Ideal option There will be a screen made, in style and shape, reminiscent of the furniture in the room.

Wooden screen for a radiator in the interior

Most often, lattice screens or mesh screens are made from wood, which cover the battery from view but allow heat to pass through well. Such screens are not cheap, especially if they are made to order, but they look very impressive, and they also provide additional space for sitting or placing certain items: toys, decorative elements, vases, etc. The disadvantage of wooden screens is that they can become deformed when exposed to high temperatures. You can create a screen model from wood yourself by first measuring the area of ​​the radiator and its thickness.

– The next option for covering the battery is a plastic screen. It is relatively cheap, but it is sometimes noted that when exposed to high temperatures, some types of plastic can release toxic substances, so it is better not to risk it and choose another way to hide the radiator.

Decorative plastic screen

– Another common method for covering a radiator is custom-made furniture or built-in furniture. This could be a chest of drawers that hides the heating system, a long bench or a console table that hides. The only thing, when you are planning such furniture with a craftsman, you need to ensure that heat can penetrate into the room. To do this, you can make carved cabinet doors or carved vertical surfaces.

The heating radiator is built into the furniture

As an option, you can consider making decorative fireplace in place of the battery, which will be not only decorative, but also a real warm cozy place - a kind of hearth in the room.

– Now designers are offering new models that are not embarrassing to show to others. These are beautiful carved models, often made to order, with three-dimensional images or patterns. Of course, this is not a cheap pleasure, but for rooms classic style These models are irreplaceable.

Decorative screen for the battery in the interior

– Disguising radiators in the bathroom can be done behind a children’s playpen net or clothes dryer (this will also be a rational way). The mesh is attached between two shelf boards above and below the radiator so that it itself remains behind the mesh. Then you can hang washcloths and towels on hooks on the mesh, which will hide the massive radiator.

– One of the most extensive options for masking a battery is a special heating installation system. In this case, the radiators are installed not in front of the wall, but inside it. This will significantly reduce the area of ​​the room and make repairs more difficult. heating system, if necessary, but the batteries will not be visible at all, although the thermal effect will not disappear anywhere.

– Another way to disguise batteries is to dismantle them and install heated floors or certain invisible convectors, which can be mounted in window sills, furniture, floors, plinths, etc. This method is considered the most expensive, but is beginning to gain popularity among those who want to have beautiful apartment without sacrificing the warmth in it. The heating battery can be hidden in a bench under the windowsill. This will be the warmest and most comfortable place in the apartment!

The heating battery is built into the window sill

– The most in a simple way What can be used to cover the radiator are curtains or drapes. Even from childhood, many people remember how they didn’t notice the radiators behind the long curtains that their mothers carefully hung and got into a lot of trouble.

Heating radiators can be hidden by curtains

This method is still popular today, although it has been somewhat modified. It is now customary to hang thick curtains directly under the windowsill using Velcro or fishing line. In this case, the curtains always hide the battery, and not just in the evening when the thick curtains are drawn. Curtains for masking the radiator are matched to the main curtains or furniture upholstery.

– Another option to solve the problem, how to close the heating radiator, is to install low decorative screens, which you can make yourself. If you decorate the screen with photographs, magazine clippings or drawings, you can get an original art object in the house.

– One of the less traditional ideas on how to decorate a heating radiator is painting it. This method has several options: the battery can “merge” with the wall or can become the object of attention in the room. In the first case, it needs to be painted the same color that is intended for the walls in the room.

The second option is more creative: if the walls are bright, the battery can be painted in pastel colors; if the walls are pastel shades, make the battery contrasting and bright.

The original way would be to paint the radiator different shades one color: from the lightest on top to the darkest on the bottom. Gold and silver paint are also popular, however, in any case, you will have to paint the heating pipes in the same color, and not just the radiator itself.

Original solutions

Disguising radiators opens up scope for creativity for those who like to invent all sorts of useful and beautiful things for the home. Perhaps some of the ones suggested here creative ideas will awaken in you creative personality and a dreamer.

Before you start masking, you need to know a few important nuances:

• The first thing you need to understand is that with any method there will be heat loss.
• Convection air flows should not be blocked by anything; this is the only way to maintain uniform heating of the room, and the windows will not fog up.
• For various emergencies, it is worth considering in advance free access to threaded connections and the radiator - this can be a window or a removable structure, for example, a door with hinges.
• For repairs, the faucet, thermal head and other elements of the heating system must remain in good accessibility.

The best ways to beautifully hide radiators

There are several ways to hide batteries; in this section we will look at the most popular and effective ones.

It is by far the most practical and popular method; most often this design is made of metal and has its advantages:

• simple installation;
• heat exchange remains the same;
• can be made with rounded corners, which reduces the risk of injury.

Glass screens

A screen made of glass will become interesting and stylish solution, especially for those who choose minimalism or modern style in interior design. Photo printing or various patterns can be applied to the glass, but this method is not budget option. Installation is carried out on a screw holder, but you will have to drill holes in the wall. However, the heating radiator will be stylishly protected. This option will fit into any interior.

Box screens

Box screens are an excellent option for decorating radiators.

• They will help to completely hide the battery.
• The box can become a piece of furniture.
• Erans are easy to install and easy to care for.
• Protect from burns or other injuries.

The photo shows an original green wooden box in the children's interior.

Let’s not forget about the most popular way to hide batteries - simply hang them with opaque or translucent curtains. Using this method, over time you will even forget that there are pipes and a radiator behind the curtains. The main thing is to choose curtains that will look harmonious and not show everyone that there is something behind them.

Painting the walls in color

How to hide a heating radiator on the wall if other designs are “prohibited”. There is only one way to paint it the same color as the wall.

Wood frame

Wood will create coziness and warmth in the apartment, and the camouflage of the battery will be elegant and beautiful. This option is for those who are furnishing their home in eco-style using natural materials. These ways to hide batteries can be used as a stand for home decor.

In the photo they are normal wooden blocks stylishly hide the battery in the kitchen.

Built in furniture

Another common way to cover a radiator is custom-made furniture or built-in furniture (shelves, cabinets, folding tables, seating).

Hide the radiator with furniture

Arrange furniture, such as an armchair or desk, so that it covers the battery. A cast iron radiator is not attractive to many, but pieces of furniture can hide it.

Replace with designer model

For those who do not want to invent anything, unique design methods hide batteries that already initially have a beautiful appearance and you simply don’t want to hide them.

Original ideas

There are many creative ideas that can turn batteries into a decorative element:

• Forged products

• Painting and decoupage of batteries

In the photo, with the help of a beautiful painting, the battery has merged with the wall.

Hide with drywall

Separately, I would like to talk about how you can hide batteries using drywall. It’s worth noting right away that the material has its drawbacks, but plasterboard construction is still very popular for repairs.

• The material is environmentally friendly and is not subject to combustion.
• You can find several varieties of this material on the market.
• This camouflage option is budget-friendly, and installation can be carried out in different ways, in a way that is convenient for you.
• Also, it is drywall that will allow the apartment owner to come up with any design, which will help not only to cover the pipes and radiator, but also to make additional decorative elements.

The downside is that drywall is afraid of external influences; if you do it carelessly, it is quite easy to break or pierce it. And if a breakdown or leak occurs, the entire finish will have to be replaced again, but this material is cheap.

Do-it-yourself installation of a plasterboard box

In order to close the battery, you need to try it on and then buy it metal profiles and other additional products.

• What materials are needed: plasterboard sheet 12 millimeters, metal profiles 27x28 and 60x27, self-tapping screws for plasterboard and metal, dowel-nails size 6x40, construction sickle, perforated corners.
• Tools: screwdriver, hammer drill, metal scissors, stationery knife, construction stapler, pencil, tape measure, building level.

Attention, for the construction of a plasterboard box there is important requirement: the window sill needs to extend beyond the radiator by at least 3 centimeters.

Work order:

Masking heating pipes

It doesn’t matter whether it’s an apartment or a house, a bedroom or a kitchen, I would like to have it everywhere good repair. Questions immediately arise: how to beautifully hide heating pipes and how can this be done with minimal costs and maximum efficiency? At the same time, the method of disguise should be truly invisible and unnoticeable, fitting into the room.

The pipe can be hidden inside the wall, or it can also be closed into the floor. Remember that old system heating should not be hidden in this way; this option is possible after a complete update of all elements.

Box on frame

It is best made from wood, plastic or plasterboard. Do not place the heating pipes close together; there should be at least three centimeters between the box and the pipe.

Hide behind decor

Pipe decoration various options, for example, wrap it with jute rope. But remember that this reduces heat transfer. Many owners decorate pipes with flowers; this can be done using bamboo with leaves. Only imagination should work here, even old pipe may look completely different.

Painting to match the color of the walls

The easiest and most practical method is to paint the radiators or riser in the color of the walls, but the heat generation will not be reduced.

In the photo in the kitchen interior, the pipes are painted to match the blue walls.

Hide under the floor plinth

It was a good invention floor plinth, in which you can easily hide batteries located horizontally and low to the floor.

Photos in the interior of the rooms

Kitchen

Kitchen is perfect room, in which all ways to hide batteries will become practical and convenient. If the room is small, then you can hide the battery using a beautiful tabletop or make folding table, which will unfold when appropriate.

Factories metal-plastic structures offer a large selection of beautiful window sills large sizes, which imitate stone, wood and other materials. A modern window sill does not break under weight and is not afraid external factors, it is easy to care for, wipe clean, it is not afraid of scratches, and so on. You can hide any type of battery in this way, including cast iron.

In the photo, wooden boxes are used to disguise the radiators.

Living room

If the radiator is in a niche, then wide window sill will help create a work area.

You can place souvenirs, vases or potted flowers on the constructed wooden box. You can also cover unsightly radiators in the living room with thick curtains.

The photo shows a modern living room. In order to hide the radiators mounted wooden structure, which also serves as a place for relaxation, storage and decoration.

Bedroom and children's room

In the interior of a bedroom and children's room, batteries can be used as another place to relax, a tabletop for decorative elements or a workplace.

We hide heating radiators using wooden, glass or plastic screens.

On the picture

Hallway

For radiators in hallways, glass screens or wooden boxes are suitable. IN small room Covering the battery is only necessary from a practicality point of view. This could be a locker for storing shoes, or the battery will become a small coffee table where keys and other necessary items will be stored.

Examples in different interior styles

Modern style

For modern style or high-tech and minimalist style, any material made of wood, glass (glass panels) or metal is suitable.

Classic style

Loft

In the loft style, old radiators and pipes are most often not covered; they are left on display or replaced with interesting design options.

Photo gallery

Below are photo examples of masking batteries in rooms for various functional purposes.

The solution to the problem of how to close batteries, which do not always have an elegant, decorative and attractive appearance, must take into account not only the aesthetic component. What looks good in a photo can actually lead to a significant decrease in the temperature in the house. It is important to consider that in addition to purely decorative function, a panel (screen, box), which helps to decorate heating appliances, also serves an important functional purpose in families with small children, protecting the child both from burns and the sharp corners of the radiator. Therefore, we will consider the decor of the radiator in the room from the perspective of three specialists at once - a designer, a heating engineer and a plumber

The problem is how to hide it in the apartment Radiator and the pipe supplying the coolant can be considered from two aspects. The first one is the day before overhaul, when it is possible (and necessary) to replace the battery. In this case, you can select and install designer batteries and then the issue will disappear by itself, and the heating efficiency will not decrease (more on this below). For example, if we're talking about about a room in a classic Victorian style, then here without cast iron batteries, powerful, massive, on a stand, casting in sections is indispensable - such radiators will become a stylish detail of the overall interior.

Another thing is when the repair does not involve replacing the plumbing, in this case there are several options for how and with what to close the battery.

Painting

The easiest way to hide the battery is to simply paint it to match the wall near which the radiator is mounted. You just need to purchase special paint for painting batteries. This is an option when radiators match the overall style of the room

Hanging screens

Screen box

Allows you to completely decorate the entire heating radiator, while you can simply make such a screen for the battery yourself from wood, the diagram is shown in Fig. 1.

At the same time, the box can not only hide an aesthetically unsightly radiator, but also act as additional element furniture, for example, stands for vases, shelves, or can become part of rack or console. A decorative wooden box can be made so that it fully matches the style and decor of the room. Its main disadvantage is the closed top, which significantly reduces the efficiency of convection. In addition, the tree dries out when the temperature changes. In this regard, screens (boxes) made of MDF, which are both cheaper and more durable, look preferable.

Advice! If the radiator is located far enough from the wall, then by combining a window sill and a frame, you can make a bench for romantic gatherings by the window.

Plastic gratings

Cheap, but at the same time definitely not for residential premises, they will hide the battery/pipe, but when heated they can release compounds dangerous to humans, especially if the panel (grid) is made of cheap plastic by a “gray” manufacturer.

Advice! Plastic screens are suitable for non-residential premises, taking into account resistance to high humidity- For bathrooms.

Glass screen

A glass panel, as a rule, is a rectangular sheet made of translucent thick glass, which is attached to the wall with steel holders. Making it possible to decorate the heating device from the front, it, leaving open space below and above, does not interfere with free air convection. A popular solution is a glass panel with photo printing.

The main task of a heating radiator is to heat the room, which it does by a combination of two methods. The first is infrared radiation, in which heat is transferred directly to objects located in the room. Exactly this thermal energy we feel it when we bring our hands close to the battery. The second method is convection, by heating the air, which, rising upward, displaces the cold air, thus organizing air circulation in the room, which leads to a more or less uniform temperature distribution.

Therefore, you should immediately decide on the main thing - no matter what method is chosen to hide pipes and radiators in the apartment, any decoration of the radiator will definitely lead to a loss of heater power. A simple example is installing a glass screen that almost completely blocks infrared radiation. And the larger the solid (without holes) area of ​​the cover (screen) on the battery, the “deeper” the battery is hidden, the more significant the losses will be. Solid (solid, without holes) boxes on top of the radiator are especially unacceptable - because they block the warm air rising upward. The photo below shows a particularly unfortunate design designed to decorate the battery.

On the one hand, it never fully fulfills its role - the supply pipe is very clearly visible. On the other hand, there are very small holes that significantly reduce the movement (convection) of warm air, and a solid screen (even a metal one) blocked thermal radiation. That is why, from the point of view of thermal engineering, perfect choice- This is a panel made like a coarse mesh.

In Fig. Figure 2 shows a cross-section of an almost optimal grille model for a heating radiator.

Infrared (also known as direct thermal) radiation, indicated by red arrows (3), passes through the grating (D) with minimal losses. It is worth paying attention to the thermal insulation screen (A), which reflects heat (part infrared radiation) and, instead of aimlessly heating the walls, returns it back to the room.

Cold air (indicated by blue arrow 1), entering from below, heats up and rises. To prevent heated air from stagnating under the window sill, forming a thermal cushion that blocks convection, install a visor (B) that directs the air flow outward. It is also worth installing an injector in the upper part (two metal plates), which allows heated air to be removed from the front side of the radiator. It is especially effective when high temperatures, due to the narrowing at the top, the draft increases significantly and the volume of exhaust air increases significantly. Despite the installed grille, the overall energy efficiency of such a design will be significantly higher than with simply installing the battery near the wall.

Second, no less important point– accessibility of the radiator and supply pipes. It's no secret that the battery is one of the potential sources of problems in the apartment. Any radiator can leak - there are many reasons for this, from water hammer to poor quality material. Moreover, given low quality coolant (water), you may need to remove the battery to wash it - otherwise, the number of actively heating sections will be constantly reduced. So, from a plumbing point of view, the best cover (panel) for the battery should provide easy access to the radiator - either not have a permanent fastening, or be attached.

Advice! At the very least, it is necessary to install a “revision” (plastic door), which will give access to the place where the pipe is supplied to the radiator - as experience shows, this is the weakest point in the entire system.

How to close the battery - we look at the options in the video:

Modern interior design involves the use of various decorative elements in a house or apartment. And very often decorative elements are used to eliminate imperfections in rooms or hide devices that have an unsightly appearance. These include heating devices, which cause the entire interior design to suffer. Therefore, you need to know how to properly close radiators and at the same time minimize heat losses.

Hide all battery flaws by creating aesthetic beauty in your house

Important Terms

It is clear that no matter what method is used, heat loss is inevitable in any case. Therefore, before closing the battery , first you need to take into account several important conditions:

1. The air flow must circulate freely. Fulfilling this condition will not only uniformly warm the air in the room, but will also help prevent windows from fogging up.
2. All taps and heating connecting elements must have free access for carrying out various works for repairs.

Both conditions can be easily met if you listen to experts who advise using removable devices or structures with special windows.

From this video we will learn how to close the batteries:

Basic ways to hide radiators

If at the construction stage for some reason the radiators were not hidden in the walls, then in order to prevent the radiators from spoiling the appearance of the room, you will have to mask the heating devices. But not everyone knows how to cover a radiator in a room to make it beautiful and convenient. There are many ways to help cover radiators:

1. Hinged screen. This device has significant advantages. Firstly, installing the screen is very simple, and even a non-professional can handle it. Secondly, the design features allow free circulation warm air. And thirdly, hanging screens are completely safe due to their rounded corners. And safety comes first, especially for those who have children.
2. Wooden frame . Any decorative element made of wood looks noble, rich and elegant. The same can be said about wooden frames, which will fit perfectly into almost any style of room. A wooden frame looks especially stylish in combination with furniture made from the same material. Depending on the design, the wooden frame can be made in the form of a shelf or rack. The only disadvantage of this method is that the device may become deformed over time from exposure to high temperatures.

Wooden frame is the simplest and economical way hide batteries

1. Glass screen. The method is considered one of the most original, because photo printing or various designs can be applied to glass. But at the same time you will have to pay a decent amount, so this method is not so widespread among the population. And for those who still decide to cover the battery with a glass screen, it is worth remembering that such material will almost halve the heat transfer.
2. Built in furniture. One of the most original ways is to disguise batteries using furniture (chests of drawers, cabinets, shelves, seating areas, tables, and so on). And since such furniture is mainly made to order, you need to be prepared for hefty expenses.
3. . The material, although it has a number of disadvantages, has nevertheless gained great popularity. At the same time, most of all, of course, plasterboard attracts with its low cost. This material is ideal for sealing radiators under the window. But we must not forget that plasterboard structures may suffer from external influences, it can easily be broken through carelessness. And if a leak occurs, you will have to replace the entire structure.

Drywall has a low cost, but do not forget about its flaws

1. Curtains. The simplest, fastest method that does not require any installation work is to disguise the heating under curtains. Thanks to large selection, you can find curtains of various colors and shapes on sale. This means that you can choose appropriate curtains for any interior. In addition, they are very often used to hide cast iron pipes.
2. Painting. This method is used if for some reason other options cannot be used. In this case, the batteries are painted to match the color of the walls.

A wide variety of methods allows you to disguise heating radiators in any room.

Design solution

It is possible to use unique design methods. For example, the battery itself can be made into an interior element by building a forged frame or any other product around it. You can also cover the heating radiators in the apartment with fabric. And the material, in turn, should fit perfectly into the design of any room. Another interesting option, which allows you to hide heating pipes, is decoupage and painting. This method is distinguished not only by its simplicity, but also by the unlimited imagination of the apartment owner.

In any case, before deciding how to close the heating radiator in a room, you need to consider all the methods, weigh the pros and cons, and only then settle on one of the options you like. And for those who are not afraid of difficulties, it is worth considering the option of heated floors, in which batteries are not needed at all.