Firewood for the dacha. How to make a wooden woodshed with your own hands

home

Internet

A firewood shed is a structure designed to store neatly stacked firewood, which you cannot do without outside the city. It allows you to store fuel so as not to take up much space and allow it to dry. It’s more convenient to create it yourself in order to guess the size and shape as much as possible, and also get a product that meets the individual needs of the owners.

Features of a homemade firewood rack

A homemade woodpile for firewood is formed in accordance with several mandatory conditions. Firewood must be protected from rain and snow, but still have the opportunity for ventilation. In addition, it is important that the chosen location is in the shade, away from open fire. Materials should not be stored directly on the ground; the floor should be made of either bricks or planks.

However, it is very bad if the floor connects directly to the ground, so it is important to maintain a gap.

The next condition is the attractive appearance of the structure., which should be combined with the rest of the buildings on the site and the general landscape design. It is important that the building is convenient for use: the owner has the opportunity to approach it from the required side and easily obtain the required amount of firewood. In this case, the fuel material must adhere tightly and not fall apart.

Suitable location

It is important to say that some people at their dacha do not make a special woodpile, but simply store firewood in the open air, covering it with material that protects it from water. But also for this purpose you can use an ordinary shed already existing on the site. Special street design located close to home will be much more convenient. By the way, if firewood is most often used for cooking on fresh air, then it is more logical to place the firewood closet to the stove or barbecue. The optimal location is the wall metal garage or a special area near the house. The main thing is that the firewood can be supported on three sides.

Exist beautiful designs, made of metal or wood, that are installed indoors. For example, this could be a vertical firewood rack for a room with a fireplace. In this case, the wood storage function is added decorative function. A portable mini firewood rack is often made by hand.

Usually it stores a supply of firewood for lighting the stove, which you have to replenish when you go outside.

Which material to choose?

From the right choice The material will largely depend on how long and how successfully the firewood box will serve. For the street, metal is often used, which makes it possible to produce a visually attractive structure that will serve for a long time and will not deteriorate from precipitation and other weather conditions. For example, it could be a woodpile from aluminum profiles, self-production which takes a couple of hours at most. By the way, it is very convenient to use for carrying, because its low weight greatly simplifies this procedure.

Reliable and durable products are made from iron or steel parts, for example, rods or pipes.

The most popular are woodpiles made from wood. If the aesthetic appeal of the issue is not too important, you can use existing materials left over from previous construction work, and do not purchase new ones. As an option, wooden structure can be made of pallets, pallets, beams, bars or boards. The only thing important condition– pre-treat the material with a product that protects against moisture and insects. A wooden firewood rack is quickly assembled, can be used for quite a long time, weighs little and is budget-friendly.

Covering a woodpile located outdoors is a must, and slate, sheets of metal, polycarbonate or even polyethylene are suitable for this purpose. By the way, the structure can even be woven from vines, if the latter grows in large quantities on the site. Separately, it is worth mentioning the woodpile built into the fireplace or stove, that is, it is a niche next to the firebox, made, as you might guess, of brick.

Decorative woodpiles, which are small in size and located in residential areas, can be forged, a regular bag made of thick cord or rope, a basket made of durable material, or even a regular one. wooden box with wheels.

How to do it yourself?

There are a large number of designs and drawings of various woodpiles on the Internet. They can vary in shape and appearance, have a frame or canopy, look like an ordinary barn with lattice walls, or be a real work of art. For a large amount of firewood used, a shed is more suitable, which can be regular or lattice. In the latter case, it will be possible to provide better ventilation, which means the firewood will remain dry. In any case, you will first need to prepare the foundation - dig a pit for soft soil, the depth of which will vary from 20 to 25 centimeters.

The resulting hole is filled with layers of gravel and sand. Next, you can build a support of six blocks: a couple should be in the middle, and the rest should be in the corners. The parameters of the standard block are 200 by 200 and 600 millimeters. At the next stage we put double layer roofing felt

To assemble the frame, you will need to use bars with parameters of 100 by 100 millimeters, pre-treated with special machine oil.

The formation of the lower trim will be facilitated by the use of screws, nails or self-tapping screws, thanks to which the blocks and bars will be connected. The strapping is strengthened with special corners, after which you can begin installing the racks - respectively, in the corners and in the middle part. In addition, you can add a couple of racks in front and one rack behind. They will be responsible for entrance area and, accordingly, additional support. It is important to make the front pillars slightly longer and the rear pillars shorter to ensure a rainwater drainage system.

Boards are nailed to the side, after which the rafters and roof frame are formed. Roofing felt and corrugated sheets are placed on top. A roof overhang distance of 35 centimeters should be maintained. The floor can be laid so that gaps of 2 to 3 centimeters remain. It will be most convenient to assemble it from boards measuring 100 by 40 millimeters. The walls, by the way, are installed at intervals of 100 millimeters.

It is necessary to cover the shed with a special solution that will protect against beetles.

A small woodpile is most often located next to the home fireplace and is made of either wood or metal. In the first case, it is recommended to take as a basis old barrel and disassemble into separate planks. Since each piece is usually bolted to a metal hoop, it will have to be cut first. The bed can be easily made from chipboard or ordinary, and the legs are made of wooden blocks. It is important to varnish the resulting firewood for better appearance, as well as long-term use.

A steel woodpile is also often made independently. It is assembled from a 2-mm steel sheet and a steel rod with a cross-section of 8 mm. The sheet is bent or cut out in a semicircle, which can be done with a grinder or gas cylinder. Next, legs and handles are attached to the resulting container. For beauty, the firewood box should be painted with black or silver paint.

Having a large amount of wicker and the ability to process it allows you to make a wicker structure at home.

First of all, a rectangle is assembled from slats to form a frame. Then several holes are made on opposite elongated sides. A copper wire is inserted into the middle holes, transforming into handles, and a vine is inserted into the rest. Having intertwined all the twigs, you can fix the finished firewood using stain or varnish.

If you don’t have time to create a full-fledged structure, you can make a firewood stand with a support made of stakes. First of all, the surface is treated - covered with pebbles or covered with a special waterproofing material. The material should be taken rectangular so that the woodpile has four distinct corners. High supports are dug into these points, to create which ordinary logs are taken. Their thickness will depend on the amount of firewood that will be stored.

From the owners summer cottages, in addition to the garden and vegetable garden, there is also outbuildings, a bathhouse that needs to be heated with wood. A homemade firewood shed can take the form of a shed, shed or sheltered gazebo. The woodshed hides the logs from precipitation and keeps them dry, while in terms of the design style it can actually be made similar to nearby buildings.

Which format of the woodshed is most suitable depends on the financial capabilities of the dacha owner and the availability of building materials:

Why is a metal woodshed the most reliable?

Despite the fact that wood is considered environmentally friendly, it is better to purchase metal panels or polycarbonate. The advantages of metal construction are as follows:

Insects do not reproduce, which means that the firewood does not become damaged.
The firewood, which includes metal, does not delaminate and is non-flammable.
To protect against corrosion, it is enough to coat it with an anti-corrosion agent.
Easy to install.
You can show your creativity and imagination by decorating a gazebo or its metal part forged elements.

There is no point in making the entire firewood shed from metal, so craftsmen use metal as a canopy, flooring, or when it is necessary to sew up one of the walls. We invite you to consider with us the option of a firewood burner installed on wooden supports with a metal visor.

ABOUT
Dean from best projects the shed for storing firewood is a gazebo with sheathed walls, it has a pitched roof, Entrance door absent. The frame consists of lumber, the walls are lined with plywood to prevent rain. The roof was made of metal. The approximate size of the structure is 2.5 × 1.4 m.

When the development of drawings and diagrams is completed, you can begin laying the foundation. Take as a foundation monolithic slabs or pour a strip base to a shallow depth. In winter, give preference pile-screw foundation. To protect the base from moisture top layer It is customary to lay roofing felt.

After the base has dried, fix the strapping; boards or timber are suitable for this. To securely fasten the timber, the cutting scheme assumes a half-tree system. What do they do next?

Attach the floor surface logs to the bottom trim.
To lay the base, take 7 strong boards, the length of which is 120 cm, plus 28 corners for fasteners.
Using a screwdriver, secure with galvanized screws.
Cover the floor edged board, leaving a 25 mm pitch between paired elements, this simple technique will help avoid the accumulation of excess moisture and improve the quality of wood ventilation.
The boards are fixed across the joists, fastening is carried out with nails or self-tapping screws.

An important nuance - before laying wooden parts, apply a uniform layer of impregnation to each with good fire safety characteristics and an anti-rotting effect. The product “SENEZH” is considered popular.

To fix the supports stably, following the perimeter of the structure, first fix the 5/10 cm boards. The stand consists of a pair of boards fastened with wood glue and nails. Boards can be replaced with timber measuring 10 × 10 cm.

Features of installation of firewood stands:

Vertical placement is fixed with corners and jibs.
The short supports serve as the back side, the long ones serve as the front part.
Verticality is checked with a building level, this can be a bubble device or a plumb line.
The front wall is formed from three boards, two of which are vertical and one horizontal.
The crossbar is attached at a distance of 1.5 m from the floor.

The metal canopy is mounted on rafters, which are positioned at an angle of 15 degrees. For the rafters, you need to equip the upper garter - the boards are attached to the top points of the installed supports. The upper ends of the racks are cut down following an angle of 15 degrees, the slope is provided towards the woodshed at the back. The optimal number of rafters is six; they are fixed to the frame at the top using nails. The boards are placed not flat, but on edge.

Most summer cottages used during the cold season are heated with wood. Purchasing ready-made dry firewood for this purpose is, to say the least, unprofitable, and harvesting, sawing, splitting and storing it is a task that seems only elementary at first glance. Although in reality, you need a little knowledge, a minimum of materials and two hands to arrange a place for drying and storing them.

But, before you start making a firewood rack at your dacha, you need to clearly know what it should be like.

Preparation and storage of firewood

Is the whole tree on fire? Almost everything, even wet, but bad. Heavily dried - burns out quickly, and resinous promotes the rapid formation of soot in chimneys, etc.

It is better to harvest any wood for stoves and fireplaces in the autumn-winter period, when there is minimal sap flow. It’s better to saw it raw, and to chop it when it’s frozen. Of course, there are nuances for different breeds, but these indicators are the most general. The exception is very hard rocks:

birch;
ash etc.

They need to be pricked only raw. When they are dry, this procedure will require three times more effort.

It is better to dry firewood in specialized dryers, where they will be ready for use in 2–3 days. But, if you built a dacha with your own money, this path is not for you. The best option for you would be to dry it in a woodshed or woodshed.

This is done for at least 7-8 months, and preferably 1 to 2 years.

The ideal humidity of firewood for stoves and fireplaces is no higher than 20%, but not lower than 10%. Drier ones burn out too quickly, and very active combustion is unsafe for heating device.

Woodshed or woodshed, photographs of examples

There is no clear definition for these devices.

Often, any pile of firewood or logs is called a woodshed, but it’s closer to the truth to call it a woodshed (woodshed). special room, a shed for storing firewood, and a firewood shed (wood shed) is a small structure for drying firewood or even a place where firewood is stacked in a special way for the same purpose.

After all, it’s not right to call firewood sheds located indoors for storing a small amount of logs brought in from the street?

And even more so this concerns special devices for their transportation and temporary storage.

But the woodshed can be both open and closed. For him, the main task is to maintain a given humidity and protect the finished firewood from the sun, which destroys the structure of the wood, and precipitation.

The following variant of its device is also possible:

The woodshed can be quite large, a free-standing or built-in room, but it is better to make the woodshed closer to the house or vacation spot with a stove, barbecue or fireplace, so that it is not far to go for firewood.

At dachas, if they are not used for year-round permanent residence, they rarely build full-fledged firewood sheds, but make do with firewood sheds.

There are firewood boxes produced industrially.

They are easily interlocked with each other and installed in a convenient place. The design provides good ventilation, but it is better to place them under a canopy.

Do-it-yourself woodshed for a summer residence, photo, drawing

First of all, a few general rules:

1. The dimensions of the firewood box, and above all its depth, are determined by the size of the firebox of your heating device, and therefore by the length of the firewood. They can be stored in 2 or more rows. This will determine one of the dimensions of the cage itself. The height is made convenient for accessing the upper rows of firewood without ladders or stands; the width depends on the amount of firewood being harvested.

If you plan to lay firewood in stacks, perpendicular to each other in rows (which is preferable to reduce pressure on the racks, at least in the outer rows), then the same size will determine the distance between the outer and intermediate racks.

2. When adding a woodpile to a house, it is necessary to provide a gap between it (especially if it is wooden) and the woodpile. Direct contact will lead to deterioration in the airflow of the firewood, the possible formation of fungus, mold, and damage to the house structures by wood-boring insects, often found in the firewood.

3. The floor of the woodshed must be installed at a distance from the ground for better airflow and to prevent moisture from entering from the base. If it is installed directly on the ground, then it is advisable to make an effective drainage cushion under it according to the following scheme:

geotextile +
sand 50 – 100 mm +
crushed stone up to 100 mm.

Or you can install it on the foundation.

4. The roof overhangs over the woodpile must be large enough (at least 40 cm) to protect the woodpile from precipitation.

After this analysis, a drawing is made

Now you can start making firewood.

How to build a woodshed with your own hands

When choosing materials, first of all, you need to be guided by considerations of sufficient strength to store a certain volume of raw, heavy firewood so that your structure does not fall apart under their weight. Its volume should include two zones:

for drying fresh firewood;
for dry firewood.

Therefore, the cross-section of the racks and flooring boards is taken with some margin. Also, if necessary, stringers are made to provide additional strength to the structure.

The rafter system is made in accordance with the selected roofing material, ensuring retention of the maximum snow cover for a given area. The slope should ensure free descent of snow.

The design of the firewood can be made entirely or partially from metal, or it can be a mobile container, which is still better placed under a shelter.

Creativity can make your woodshed an attractive architectural feature in the landscape.

Interesting, and most importantly simple, is the experience of building a firewood shed from wooden pallets. Of course, its dimensions determine the dimensions of the constituent elements themselves, but this does not mean at all that such a structure cannot have a decent appearance.

An even more advanced version of a shed for storing firewood, assembled from pallets, using a minimum amount additional materials, shown in the video:

But creative ideas creating firewood sheds with your own hands doesn’t end there.

Country firewood from improvised means

This is a firewood rack, created from old barrels without a bottom connected by thick ropes. They are often made from oak, which, during use for its intended purpose, being constantly in a wet state, becomes almost stained. Therefore, you don’t have to worry too much about the service life of such a structure.

The experience of constructing a firewood shed from reinforced concrete rings of various diameters is also interesting.

The rings are installed on an effective drainage pad, because concrete absorbs moisture well, which is clearly not suitable for preserving firewood. And the main thing is functionality.

The architectural appeal of this structure is given by the imitation of tree bark on the outer surface of the rings, made of a cement-sand mixture, giving them the appearance of hollow logs made of tree trunks of huge diameter.

Dear readers, if you have any questions, please ask them using the form below. We will be glad to communicate with you;)

A firewood shed is needed for storing pre-harvested logs and drying them. The drier the wood, the more heat it produces. Firewood is placed in it in neat rows so that they can be easily taken out without collapsing the entire stack. You can build a firewood shed for your dacha with your own hands from bricks, wood, metal or remnants of old building materials. A room for drying and storing firewood can be either ordinary and nondescript, or serve as a decoration for the site.

Types of woodsheds for a summer residence

There are several types of buildings for firewood in the country. A separate shed with a door is called a woodshed, a small stand or basket for the consumable part of the fuel supply is called a woodshed, and a shed for drying and storing firewood is called a woodshed.

The following requirements are imposed on the woodcutter:

large capacity;
maximum protection from precipitation;
unhindered air circulation for quick drying of fuel.

Outbuildings are usually located in the depths of the site, away from prying eyes. But a firewood rack built with your own hands can look like an exquisite decoration for a summer house. Sometimes firewood sheds act as an element of home design; they are used to decorate one of the walls or a relaxation corner.

Woodsheds are divided into:

free-standing with a pitched roof;
free-standing with gable roof;
extension to the wall of a building;
woodshed built into the wall.

One of the mistakes when building a firewood shed for a summer residence with your own hands is choosing the wrong location. You should not build it in the center of the site so that the structure does not obscure the plantings. You can’t install a woodshed in a low area so that the logs don’t start to rot. It is optimal to choose a small hill with infertile soil. You should make sure that there is a paved path leading to it.

Attaching a woodshed to a wooden wall of a dacha is very dangerous. First of all, it's against the rules. fire safety, secondly, the risk of infestation of the building with bugs that may be in the logs increases. If it is not possible to build a free-standing structure with your own hands, wooden wall the dacha should be covered with a metal sheet slightly larger than the dimensions of the canopy. And be sure to treat the walls of the house and woodshed with a special insect repellent solution.

Freestanding firewood sheds look like a shed with lattice walls. If necessary, in winter, open firewood sheds are covered with plywood sheets to protect them from snow. They can only be installed at the bottom of the canopy. With the arrival of spring, the protective sheets are removed so that the firewood dries faster.

Important! Firewood must not be placed on the floor or ground. This will allow them to become saturated with moisture and impede air circulation.

What are wood burners made of?

You can build woodsheds with your own hands from almost anything:

beam;
brick;
leftover lumber;
materials obtained from dismantling old buildings, etc.

As a last resort, you can build a woodshed “from what was there.” Review the supplies of lumber available at the dacha, and, based on this, build a shed with your own hands. Fast, cheap, but unreliable - there is no guarantee that the entire fuel supply will fit. Another economical option- woodshed made from wooden pallets.

An approximate list of materials and tools that will be required to build a woodshed at your dacha with your own hands:

cinder block, pipes, pillars, concrete for the foundation;
logs, beams for the frame;
boards for wall cladding and roof construction;
roofing material (galvanized sheets, corrugated sheets);
nails, metal fastener, corner;
power tools, tape measure, hammer, axe, screwdriver, level, plumb line, hacksaw, saw.

Important! The roof needs light weight, but durable materials. Slate and tiles are too heavy; ondulin or roofing felt can sag on the sheathing with large cells.

If the dacha is built of brick and there is an overhang of the foundation that allows you to place a woodshed on it, you can use the roof of the building as a canopy, and build the walls and floor with your own hands from metal grating and leaf. This is the safest and most economical option: the foundation, back wall and roof already exist, materials are only needed for the side walls and floor.

More difficult option a wooden firewood shed attached to the wall can also be placed on the foundation of the building, and the roof can be slightly expanded with galvanized sheets.

Drawings of woodcutter

Before starting work, you should determine how much fuel is supposed to be stored in the woodshed. If you come to the dacha from time to time, and you only need fuel to light the barbecue, then you won’t need a large woodshed. If you plan to live at the dacha during the cold season, and firewood is needed not only for cooking barbecue, but also for heating the house, then you will have to build a spacious firewood pit in which the logs can dry well. You need to build such a structure not far from your home, so that in cold and bad weather you don’t have to go far for fuel.

Important! For heating a 100 sq.m. cottage during the winter season. m. you need approximately 1.7 cubic meters of birch firewood or 2 cubic meters of pine. It is necessary to create a supply of fuel for at least two seasons so that the wood has time to dry well.

Drawing of an open woodshed, which is easy to make with your own hands:

An approximate diagram of a columnar foundation, a method for installing and securing pillars with your own hands:

If the logs in the woodshed are stacked several rows deep, it is more appropriate to divide the volume into parts. Then damp, recently delivered firewood will not mix with already dried firewood.

Drawing of a woodshed with a pitched roof:

Important! For ease of use, the roof of the firewood shed is raised to a level of 2 m or higher.

How to make a woodshed for storing firewood

The woodshed requires a reliable foundation. As a last resort, you can get by with columns dug into the ground to a depth exceeding the freezing level. It is optimal to use ready-made concrete tables with dimensions of 200x200x400 mm. If there are frequent winds in the region strong winds, they are built into the foundation pillars anchor bolts for securing the firewood frame. It is not enough to just dig the posts; they need to be concreted or strengthened with sand and crushed stone, covered in layers and compacted well.

Sometimes the floor in the woodshed is made of lattice or large gaps are deliberately left in it. This is not the smartest solution. Wood debris and dust that spills into the cracks will quickly rot, creating favorable conditions for the reproduction of harmful insects. Not only firewood can be damaged, but the dacha itself and the entire garden plot. Another danger of a cracked floor is that in warm weather, rotting debris may ferment. Not only are alcohol vapors explosive, they are also harmful to health.

Important! Monolithic foundation for a woodshed is difficult to manufacture, but will save you from many problems: there is no need to lay the floor and take care of the debris underneath it. In addition, concrete accumulates heat and then releases it for a long time, that is, the firewood will dry out much faster.

Experts have not come to a consensus regarding the location of the planks, the angle of inclination, and the distance between them. The horizontal lathing strengthens the frame, but splashes bounce off it when it rains, which is not good for fuel. The horizontal lattice does not have this disadvantage, but it does not support the frame. The best option- a diagonal lattice, but it will require high-quality material.

They claim that using planks mounted in a certain way can speed up the process of drying firewood in the country, but there is no evidence of this. The best option is to completely sew up the top and cover the bottom third with a lattice. In this case top part will reliably protect from precipitation, and the lower one will provide access to air.

Important! Wood felled in winter time or in early spring, will dry by the beginning heating season, and firewood collected in the summer will only be ready next year.

Freestanding woodshed

The simplest option is a canopy on four poles with the floor raised above the ground. It’s easy to make it yourself from leftover materials, but a large number of fuel may not fit. A spacious separate firewood shed will require the development of a plan and the construction of a foundation on at least six columns.

Important! The distance between a residential building and a separate firewood shed cannot be less than 4 m.

Most often, wood sheds in the country are built from wooden beam and boards. The optimal option for a floor in a woodshed: tongue-and-groove boards (from 40 mm), laid on logs (150x75 mm) in increments of up to 450 mm. The floor must withstand loads of approximately 1000 kgf/sq.m. m. The gap between the base and the ground level is under no circumstances covered with a plinth, so that there is access for removing fire hazardous debris and air can circulate freely.

Drovnik open type built with lattice walls. If the region has snowy winters, then the slats are filled at a slight angle to prevent precipitation from getting inside. If the dacha does not have the required number of identical planks or boards (from 30 mm), you can use any relatively thin lumber, arranging them in any order: vertically, horizontally, at an angle. The main thing is to leave as many gaps as possible. The sizes of the cracks vary from 5 cm and more. Lumber is nailed (preferably with corrugated nails) or secured with self-tapping screws.

Important! Gaps in the sheathing that are too wide will give thieves access to the firewood supply.

The lower crown is made of timber (approximately 150x150 mm), for the side posts and the top trim the size is 100x200 mm. The recommended roof angle is 15-20°. Often, when constructing a roof, rafter beams are not used. Instead, a sheathing is installed in two tiers with increments of up to 45 cm. Longitudinal (along the long side) and transverse beams can be laid in two ways:

longitudinal from above ( good ventilation, suitable for regions with low rainfall);
transverse on top (for places with high rainfall, snowy winters and strong winds).

For regions with harsh climatic conditions It is recommended to install a shed with a gable roof at the dacha. It will better protect the fuel from precipitation. But there is a nuance: the pediment needs to be made lattice like the walls, or small holes will have to be left for ventilation.

Important! The sheathing of the walls of a gable woodshed should be straight (horizontal or vertical), cross or diagonal. Sheathing of the “blinds” type is not suitable for this design.

Woodshed adjacent to the wall

It is much easier to build a canopy adjacent to the wall of a summer house with your own hands than a free-standing structure. It is ideal for regions with warm winters with little snow, where there is no need to store large amounts of fuel. The disadvantages of an attached firewood shed include:

high level of fire danger;
the risk of infection of the dacha with bark beetles, mites, and fungus.

Problems may also arise with the foundation of the building. It’s good if the dacha was built taking into account the future extension and the foundation for it has already been laid. It is almost impossible to connect an existing foundation and the base of a woodshed with your own hands without damaging the structure.

The slope of the roof of an attached firewood shed should be directed away from the house. Then the heat from the residential building will speed up the drying of the logs. In this case, the front wall cannot be made closed, since under the eaves of the roof it collects wet air, which will prevent the firewood from drying out. The roof deck should be as light as possible so as not to overload the structure. Galvanized or corrugated sheets are suitable.

Important! To reliably protect fuel from precipitation, the roof overhang should be at least 35 cm.

Covering the side walls with inclined slats (“blinds”) will protect the firewood from moisture, but will make it difficult for air to penetrate, that is, it will slow down drying. If such protection from frequent precipitation is necessary, the “blinds” slats should be spaced at large intervals or mounted in a woodshed forced ventilation. A budget option sheathing – poles or slabs with the “back” facing outwards. This is a cheap, but very fragile material, which is also quite difficult to secure.

Important! Treatment against bugs and fungus will not hurt either stone or brick dacha. Insects manage to “seep” into the smallest cracks, and fungal spores are able to penetrate even through the seams of brickwork.

Photos of woodsheds for a summer residence with your own hands

Dacha in rustic style will only benefit from the unique design solution- a whole wall of logs.

On personal plot there are no unimportant buildings - the convenience and style of this space are made up of little things. So you can store firewood for the winter by approaching the process creatively - by arranging a beautiful woodshed from available materials. Participants offer interesting design solutions that you can use too.

In the old days, a woodshed was not only a building for storing firewood, but also a merchant of this common type of fuel. They paid special attention to the preparation of firewood, they composed proverbs, sayings and sayings: “If you want to amuse yourself, don’t chop wood,” “How does winter know that the poor man has no firewood,” “The firewood was burning hot, there was parko in the bathhouse; there was no firewood - and everything was lost”, “The lazy husband has no firewood in the yard.”

Forum member dim-dim I decided to make a neat woodshed and find out how open the structure should be:

- Of course, the woodshed must be ventilated. But you don’t want the rain to pour in from the side. Maybe cover the walls with polycarbonate?

denforever:

– If you make the woodshed too open, in winter the snow will cover the firewood. Personally, it’s like this for me, and when you dig up firewood and bring it into the house, a puddle starts to flow.

ShaiTan:

– The firewood itself is often delivered raw, only sawn and split – it needs to dry out. I’ll make my own woodshed like this: a metal frame covered with chain-link. Under the roof there is a place for birch brooms. Concrete base(easier to sweep). Gate with a lock (from hooligans). It’s cheap and cheerful, it’s airy but doesn’t get wet, plus bark beetles from firewood don’t eat metal.

Bark beetles are a serious reason to think about where it is best to set up a woodshed. Many homeowners and summer residents, in order not to walk far, store firewood close to the wall of the house or bathhouse.

MegaPon:

– I wouldn’t build a woodshed next to existing buildings, so as not to rack my brains later on how to get rid of borers, ants and other insects that live in the wood.

ShaiTan:

- Fact! Insects will eventually move from . The best option– a separate woodshed.

Forum member OlegCheb He built his own free-standing woodshed in three days from materials left over from the construction of a house and a bathhouse. As a support, he used six concrete blocks 200x400x600 - the ground was previously dug in the places where they were installed; filled, spilled with water and compacted with sand. On concrete blocks a forum participant laid roofing felt and laid the bottom trim from round timber with a diameter of 120 mm. Then the thorough owner mounted the racks and top harness from 100 mm timber, installed rafters and sheathing. The roof of the woodshed is covered with ondulin.

The material for the walls was a 30 mm board, which previously served as formwork during the construction of the foundation of the bathhouse. It was a shame to throw it away, and OlegCheb beat the concrete with a hammer and then cleared the corner grinder with petal disc. The builder used the same board on 40x80 mm and 20x30 mm bars, from which he made the door. To prevent the building from looking dull, the forum member mounted the walls according to the checkerboard principle, using 40x40 mm timber: one board was hemmed in front, the other in the back. To add color, the wood was covered with rosewood stain. That's what came out of it:

But this one, a little more open, wooden woodshed in chocolate white color scheme appeared on the forum member's site numis :

With slanting rain, water falls on the outer logs, but thanks to ventilation they dry out quickly.

Member of our forum lancen your own storage for firewood...woven. The material for the original woodshed was flexible tree branches. The owner also uses the building as temporary storage for tools.

Members of the forum advise determining the size of the woodshed based on the volume of imported firewood and the space that the already stale logs will occupy. You will use dry firewood for heating, while fresh firewood will wait its turn and lose excess moisture. For convenience, the woodshed can be divided into sections.

In order not to walk with an armful of firewood in the dark, it is also important to provide lighting for the woodshed. Some forum users additionally install lights with a motion sensor outside the building. They turn on automatically, and the owner no longer needs to go back to turn off the light.

Woodshed or woodpile?

Or maybe you shouldn’t bother building a woodshed, and just put the wood in a woodpile right on the ground, experimenting with the shape of the structure for beauty?

Woodpiles in the shape of haystacks in the Pyukhtitsa Assumption Monastery. Kuremae village, Estonia

– Woodpiles on the ground are good for those who have high consumption firewood And for those who have small ones, it’s better to lay them higher so that they don’t rot., says a forum participant Hel .

Some forum members use open woodpiles only in the summer, and in the fall they put the dried firewood in the shed. All you have to do is choose which firewood storage option suits you best.

You can read advice from forum members on how to build a beautiful woodshed in our forum. Find out about major renovation a dilapidated woodshed is possible. The article describes the properties of different wood fuels. You can read about making a wood splitter with your own hands.

Sections