Log house 6 by 8 layout. Original projects of log houses

Save on building a house without compromising its quality: choose a standard project. On the page we have placed a catalog of projects wooden houses, developed by our architects and repeatedly implemented by builders.

We use only northern wood, controlling every stage of house construction. Construction is carried out on a turnkey basis and includes all stages, from the installation of a log house and the construction of a foundation, ending with finishing and installation of communications.

Catalog of projects made from rounded logs or hand-cut logs

In the catalog you will find:

• compact one-story houses;
• many projects of two-story wooden houses with a balcony;
• spacious estates with an attic;
• bathhouses with a porch or terrace;
• projects of wooden houses with a garage.

You can look at the layout of the house or get acquainted with its parameters by clicking on the link of the selected project. Each house can be built from rounded or chopped logs (Canadian or Russian felling).

Choosing wood for construction

We build from Kirov pine, cedar and larch. We have two own production, which are located in Kirov and Sayanogorsk (Khakassia). When booking a forest during project development, it is possible to select the region for cedar harvesting: the available geography of logging is all of Siberia!

A rational solution is a combination of different types of wood:

The mortgage crown is Siberian larch. This durable and moisture-resistant wood will last almost forever, and you will be spared problems with the surround.

Walls made of Kirov pine - this solution will reduce the cost of a wall kit by 15-20% compared to cedar of the same diameter.

At the top there are a pair of cedar crowns that will improve the atmosphere in the pine log house and enrich the air with beneficial phytoncides and aroma.

We have 20 years of experience working with wood, we employ permanent teams and hereditary woodcutters from Siberia. Our chief architect has been working with our company since 2002, all of his design and planning solutions are carefully thought out and calculated!

Linear dimensions 6.0x8.0 m

Area (total/living), m2 66/53 m2

Number of floors 2

Number of bedrooms 3

Construction time, days 20

Set of logs with a diameter of 22-24 cm

BASIC EQUIPMENT:

• A log frame with a diameter of 22-24 cm, processed with an electric planer. Chopping “into the bowl” or “into the paw”.
• Internal partitions - logs, marked in a different color - frame (mounted during finishing work).
• Sexual and ceiling beams(joists) – timber 150x100.
• The pediments are chopped.
• Loading Unloading.
• Delivery within the Moscow Ring Road (for distant regions is calculated individually).
• Consumables: waterproofing for 1 crown, nails, staples, hardware, wooden dowels, etc.).
• The height of the 1st floor is 3 m. (clean 2.7 m.)
• Raising the walls of the 2nd floor by 1.2 m.
• The height of the 2nd floor is 3.3 m to the ridge.

At the request of the customer, changes can be made to the project in terms of layout, height, basic configuration. The diameter of the log and the type of processing (barked, scraped, electric planed) can also be changed.

If changes are made, please check the final cost.

Complete set made of timber 150x150

BASIC EQUIPMENT:

• The walls of the house are timber 150x150.
• Internal partitions - timber 150x100, marked in a different color - frame (mounted during finishing work).
• The gables are timber 150x150.
• The rafter system is timber 150x50.
• Lathing – edged board 150x25.
• Inter-crown insulation – jute flax fiber.
• Under-roofing membrane or roofing felt (to choose from at the request of the customer).
• Consumables (wooden dowels, nails, staples, hardware, waterproofing for 1 crown, etc.).
• Loading Unloading.
• Subfloors on the 1st floor.
• The height of the 1st floor is 3 m (clean 2.7 m).
• Raising the walls of the 2nd floor by 1.2 m.
• Height of the 2nd floor 3.3 m to the ridge

Complete with prof. timber 145x145

BASIC EQUIPMENT:

• The walls of the house are timber 145x145.
• Internal partitions - timber 145x95, marked in a different color - frame (mounted during finishing work).
• The gables are timber 145x145.
• The rafter system is timber 150x50.
• Lathing – edged board 150x25.
• Inter-crown insulation – jute flax fiber.
• Floor and ceiling beams - timber 150x100.
• Loading Unloading.
• Delivery to the Moscow Ring Road (for distant regions is calculated individually).
• Under-roofing membrane or roofing felt (to choose from at the request of the customer).
• Consumables (wooden dowels, nails, staples, hardware, etc.).
• Treatment lower crown antiseptic.
• The binding of the lower crown is 150x200 timber.
• Subfloors on the 1st floor.
• The height of the 1st floor is 3m. (clean 2.7 m.).
• Raising the walls of the 2nd floor by 1.2 m.
• The height of the 2nd floor is 3.3m. to the ridge.

At the request of the customer, changes can be made to the project in terms of layout, height, and basic configuration. If changes are made, please check the final cost.

Equipment: Shallow strip foundation

• 1. Concrete. Concrete mix brands M250, M300.
• 2. Fittings. Fittings - diameter from 10 mm.
• 3. Formwork. Edged board 150x25 mm.
• 4. Sand cushion.

Sand, poured to a depth of at least 20 cm. Thoroughly compacted.

• Digging a trench around the perimeter and under the partitions, backfilling sand cushion, compaction.
• Installation of formwork with ventilation holes.
• Manufacturing of reinforcement frame.
• Pouring concrete. Overclocking.
• Dismantling of formwork.

Complete set: pile-screw foundation:

Pile diameter - 108 mm.

The length of the pile is 2.5 m, screwed to a depth of up to 2 m.

Installation time (20-30 piles) – 1-2 days. Installation can be carried out in areas with any type of soil under any weather conditions.

Warranty and full package of Documents.

• Marking the foundation around the perimeter and under the partitions (if provided for by the project).
• Delivery of all materials to the site, unloading.
• Driving the piles to the depth specified by the Customer.
• Filling the internal cavity of the piles with cement mortar.
• At the Customer's request, it is possible to weld heads or channels (specified in the Contract).

Layout

We present to your attention two-storey house from a log. The cottage has a veranda, which makes it even more attractive to buyers. The house has three bedrooms, so a family can live there permanently. The next advantage of the house is the material that was used during construction. Wood is an environmentally friendly material. In addition, in such houses it is very easy to maintain desired temperature air.

Floor strapping and joists

Walls and partitions

Array. When building a house from solid wood:

• The external walls of the first floor are made of the material chosen by the customer for construction (solid timber, laminated veneer lumber, rounded logs).
• The internal partitions of the first floor are frame, sheathed with class "B" clapboard on both sides.
• Frame partitions are installed with a settlement gap to allow shrinkage of the walls of the house.

Frame. With frame house assembly technology:

• The frame of the external walls is made of edged boards 50x150 (thickness) mm.
• The frame of the internal partitions is made of edged boards 50x100 (thickness) mm.
• External walls and internal partitions are sheathed with class “B” clapboard on both sides.
• External walls are insulated with glass staple fiber 150 mm thick.
• On the outside of the walls, insulation is laid with a wind- and moisture-proof vapor-permeable membrane, with inside- vapor barrier membrane.
• Insulation of internal partitions is not performed.
• The internal height of the ground floor premises is from 2.35 to 2.4 m.

Floors and joists

• Regardless of the construction technology, the floors of the first floor are double.
• The subfloor is assembled from edged boards 19-20 mm thick and rests on the cranial bars of the floor beams.
• The finishing floor is assembled from a fine planed tongue and groove board with a thickness of 30-40mm.
• Floor joists are made with a section of 50x150 mm, floor beams are installed in increments of 0.5 m.
• The floors of the first floor are insulated with 50mm thick glass staple fiber, the insulation is laid on both sides: on the bottom with a wind- and moisture-proof vapor-permeable membrane, on top with a vapor barrier membrane.

Interfloor ceilings

• Interfloor floor beams are made of boards with a section of 50x150mm.
• The beams are installed in 0.5 m increments and rest on external walls houses and support beam-girder.
• Ceiling interior spaces The first floor is lined with class “B” clapboard from the bottom of the interfloor floor beams.
• Insulation is laid between the beams - glass staple fiber 50 mm thick, the insulation is laid on both sides with a vapor barrier membrane.

Ladder

• A staircase is installed inside the house, the main elements of which (steps, stringers, strings) are made of wooden furniture board.
• The useful width of the stairs is 830 mm.
• The staircase is assembled using self-tapping screws using metal corners for fastening winder steps and other structural elements.

Attic

• The attic in the basic configuration is one common area without partitions.
• Outside and inside, including the ceiling, it is lined with class "B" clapboard. No insulation is provided.
• The attic floor is assembled from 30-40 mm planed tongue-and-groove floor boards. Ceiling height 2.4 m.

Doors and windows

• Entrance and interior paneled doors are installed in the house.
• Panel doors are not equipped with handles for opening and locks.
• The windows are installed with wooden double glazing, size 1.2x1.2.

Roof

• Changing the roof shape from gable to broken is free of charge.
• Roof covering- galvanized steel in the form of corrugated sheets.

Delivery

• Delivery up to 100 km from our production base in Bear Lakes is free.

Dear visitors! The BrusLandia company reports that when you order the construction of a house made of timber or logs, you receive the following services absolutely FREE:

SERVICES FREE:

1. Setting up a cabin on the site for the crew to live in (if there are no other accommodation options).
2. Delivery of materials to the site using our own equipment.
3. Unloading and storing material on site.
4. Working project of the house.
5. Redevelopment of a house to suit your site, without changing the amount of materials.
6. Technical supervision over the quality of work performed. 3 year warranty. Home warranty service.

Information for customers

Types of profiled timber

Profile A- This classic look profile, has a wide groove, compensation cut at the top and bottom (it saves the timber from cracks). The timber fits tightly to each other, and in order to prevent the house from shrinking, the crowns are fastened with wooden dowels. The joints of the beams in the corners of the house are made according to the dovetail principle, which ensures that there are no through gaps in the house.

Profile B- This type of profile, which is often called Finnish or Scandinavian, is the most popular in the construction of houses made of timber. It has a double lock (which ensures the tightest fit of the crowns among themselves), a special cut at the top and bottom (it saves the timber from cracking). Better thermal insulation jute helps (a special seal that is placed between the crowns). Also, the crowns of the house are fastened with wooden dowels (so that the timber does not move when it dries out). The beams in the corners of the house are sawed down dovetail(so that there are no through gaps in the house). A house made of timber of this profile is very durable, warm and usually lasts for many years without repair.

Profile B- If you are choosing between profiled timber and logs, this profile is an excellent option, as it has all the advantages of option A, plus with outside imitates a log. Jute is placed between the beams (the most best insulation, many times better than moss and tow). And the crowns are additionally fastened with dowels (these are wooden sticks for attaching the timber to each other). This fastening ensures even shrinkage of the house.

A country house made of rounded 6x8 logs can be built on a plot small area. The one-story option will be cozy dacha, A two-story cottage - comfortable place for family living. Manifold architectural projects makes it possible to choose the type of structure that suits personal preferences and needs. This could be a log house in the form of a tower, a house with an attic, a carved porch or a terrace.

Why are log houses popular?

Rounded logs are a structural material obtained from a tree trunk using high-tech machine processing. The quality of wood determines performance characteristics future building. It is important that logs of proper quality are selected for the construction of a residential building (assessment is carried out according to the parameters of moisture content, uniformity and structure of the wood).

The price of a 6x8 house made of rounded logs depends on the quality of materials (cost of wood different breeds varies over a wide range), the complexity of the project and the technologies used. Subject to compliance with building standards and rules, a structure made from high-quality logs will become reliable, durable, and comfortable to live in. country cottage. The advantages of living in a log house are the following:

• favorable microclimate;
• minimal heating costs (wood prevents the leakage of warm air);
• no need to use decorative finishing(smooth log walls look beautiful on their own);
• low construction cost (compared to houses made of stone and brick).

A house made of rounded larch, cedar and oak logs is not inferior in strength and durability to stone buildings.

Construction times for houses made of rounded logs

Construction of a log house takes little time - 45-60 days in the warm season, in the absence of extreme weather conditions. However, how many months will it take for the building to be ready for some internal work(for example, installation of stairs or installation decorative designs), depends on many factors:

1. The time of year during which construction takes place.
2. Characteristics of the log (moisture level).
3. Wood species.
4. Climatic conditions.

Works in the area wooden architecture must be fulfilled experienced craftsmen who know the peculiarities of shrinkage of coniferous and hardwood buildings. Wood is a living material that changes its properties depending on external conditions.

Wood compression occurs as the material dries - the period of primary stabilization of the log structure natural humidity is at least 7 months. Thus, a turnkey house is still long time will shrink, although this process will occur less and less actively every year.

To prevent deformation of the structure, special technologies are used - installation casing boxes into doorways and window frames, as well as compensators for vertical supports. Adjustment of stabilizing structures is carried out monthly.

Price log house(6x8) of simple design is 2-4 million rubles. Of course, the price increases many times when valuable wood is used. As for the comfort of living, this factor completely depends on the punctuality of compliance with construction technologies and quality construction material. On our website you can see projects of houses made of 6x8 rounded logs.