Rating of iron door manufacturers. Entrance metal doors: rating of the world's best manufacturers

home

Internet

High-quality iron doors are the best option for both apartments and private houses. They are durable due to different ways The finishes are attractive. There are just a lot of manufacturers, which makes it difficult for buyers to choose. Before purchasing, you should familiarize yourself with the rating of the best manufacturers iron doors, find out their strengths and weaknesses. We bring to your attention the top best steel doors on the Russian market.

Entrance doors from different brands differ in the materials used, production technology, hardware features and price. The reliability of the design directly depends on the cost. Iron doors are usually divided into mid-price, premium, and budget products. The most affordable designs are rarely purchased. Since the metal used for their production is too thin, such an entrance door cannot be reliable.

To compile a rating of metal entrance doors 2018, the opinions of experts and consumer reviews are taken into account. What matters is the experience and popularity of the company, as well as the width of the product range. In the middle price segment, Forpost, Neman, Stal, Bravo are considered the best. In the premium segment, the rating of the best iron doors includes the brands Guardian, TOREX, Elbor. These are Russian door manufacturers whose quality is not inferior to imported products.

Outpost

The 2018 steel door rating is topped by Forpost products. The first products were released by this company in 1998. Starting in 2009, production was moved to China to reduce manufacturing costs. This made it possible to produce 500 thousand units of goods annually. Unfortunately, since that time, low-quality fakes have appeared. Therefore, when purchasing an entrance system, you should always ask for a certificate, inquire about the warranty, and purchase iron doors only through official representatives.

To review metal doors Outpost is included due to the following advantages:

low price (even for the most elite models);
a wide range of, products can be selected for a private house and apartment with different interiors;
There are a sufficient number of service centers, so if necessary, you can seek advice or call a specialist to your home.

Outpost iron doors have their drawbacks. First of all, this applies to fittings, which are manufactured at the same plant. It is difficult to replace it with other analogues. Sound insulation is present only in some models. Also, we must not forget that there are fakes.

Groff

This is one of the brands of Bravo, a famous company for the production of iron doors. It is she who continues the rating of metal doors for apartments in 2018. The main advantage of Groff products is the use of steel of considerable thickness. In addition, the structure is reinforced with stiffening ribs. Non-flammable mineral wool is used as insulation.

The manufacturer pays attention to the aesthetic characteristics of its products. Due to the combination of appearance and strength, Groff is considered one of the best metal entrance doors. All products are guaranteed for up to 10 years, during which the service department is obliged to service the structure installed in the house or apartment.

Bravo

Bravo is considered one of the leaders Russian market iron entrance systems. Entrance metal doors are among the top best, according to consumers. The company is ready to provide customers with more than 350 different models, including those made using unique 3D technology.

The main advantages of entrance structures of this brand:

there are available models with veneer finishing;
reliable and high quality steel doors;
excellent protection against drafts due to high quality seals and insulating materials.

At the same time, in the most budget options Sound insulation is only average.

Neman

Metal rating entrance doors continues the Neman brand. This is a company that produces truly reliable and safe products. The brand has a wide selection of models. The products have reasonable prices. At the same time, the manufacturer pays great attention to the external characteristics of the product. Neman entrance systems compare favorably with their competitors in their decorative characteristics.

To produce the best steel doors, alloy steel of considerable thickness is used. All models are equipped with two locks; if necessary, their number can be increased. Therefore, there are no questions regarding the safety of the product.

In addition to good value for money and interesting design solutions, Neman is included in the top metal doors because it meets all safety requirements. This is confirmed by certificates.

The only downside worth mentioning is the insufficient strength of the most budget products from this manufacturer.

Became

The rating of steel doors is also not complete without the Steel brand. Products from this manufacturer are distinguished by good reliability and a sufficient level of resistance to burglary. In these parameters, it is a little reminiscent of Elbor. However, unlike this brand, the manufacturer Steel does not have very expensive goods. Due to this, the company's products are popular and have received many positive reviews from consumers.

Professionals also praise this brand, although there are not the most successful models in its line. But in the price segment, this is a worthy manufacturer, which is rightfully included in the rating of metal entrance doors to the apartment.

The main advantages of Steel products:

wide range of models;
many options using various finishing materials;
good level of service.

The main disadvantage is the presence of unsuccessful models, which requires careful choice from the consumer. Before purchasing, you should ask managers about all technical characteristics.

Guardian

The rating of metal doors for apartments would also be incomplete without the Guardian brand. The plant began producing iron structures back in 1994. Guardian entrance structures are popular among buyers who value beauty. Therefore, they will be useful to those who are looking for something original and want everything in their house or apartment to be in harmony. In terms of safety parameters, there are also no complaints about the product of this brand. Indicators fire safety, burglary resistance, noise insulation, service life - all these characteristics are confirmed by international certificates.

Among the advantages that made it possible to include entrance systems of this brand in the quality rating of steel doors 2018, it is also worth noting:

the ideal combination of the door leaf and the door frame, the gaps between them are minimal, which guarantees a tight fit of the door;
in any price segment there are many models to satisfy the demanding consumer;
products comply with Russian and international requirements;
As a filler for the canvas, a slab of mineral wool is used - a non-flammable material with high insulating properties.

Everything is good in reliable Guardian metal doors. The only thing customers are not happy with is the service. If even the most complex breakdowns occur, they cannot be quickly eliminated. The customer service is no different in efficiency.

TOREX

A review of steel apartment doors would be incomplete without the TOREX brand. This is another popular Russian manufacturer, whose production is located in Saratov. The first products were produced on it back in the Soviet Union in 1989. The plant is constantly developing, so entrance systems have become popular not only in the CIS countries. The company has 8 warehouses.

good service;
high quality products;
compliance with all safety standards, including heat resistance for some models up to 5-6 hours;
wide assortment range, attractive design products.

The main disadvantage of the products is their considerable cost.

Elbor

Manufacturer of iron doors Elbor is also included in the rating of the best metal entrance doors. The company has an excellent reputation, which he has worked on since the founding of the plant in 1976. At first, the company produced various goods for military purposes, then retrained to protect private property. Due to this specific nature of production, all Elbor products are different highest stability to burglary.

The company does not produce budget models. All products are made using special technology to increase their reliability. The coatings are fire-resistant, and the filler inside the sash is non-flammable mineral wool. Moreover, the products have an attractive design. A review of steel entrance metal doors and high test scores also allow us to include products of this brand in the ranking of the best.

Imported Fortus and DIERRE products

In addition to products Russian production, the rating of steel apartment doors includes popular brands from Germany and Italy. Fortus is fundamentally different from most manufacturers in that it specializes in the production of custom doors. Minimum finished products and maximum opportunities to assemble systems at your own discretion. The buyer can choose the number of sashes, locks, other fittings, door finishes, and so on. Due to this, more than 1000 combination options are available to the consumer. This approach allows you to choose the best metal entrance doors for your apartment or country house. Any of them will have high strength, sound insulation, and will protect property and heat.

DIERRE is a company from Italy that specializes in the production of high-quality metal entrance doors with a special design. The manufacturer monitors all new products on the market and introduces the most advanced technologies. Their line even includes “smart doors”; they are controlled through remote control.

High-quality metal doors from Italy are distinguished by high aesthetics; the finishing of the door leaf is complemented by exquisite fittings. The cost is as follows entrance structure Not everyone can afford it, but the DIERRE system will be the highlight of any room.

What to consider when choosing?

The brand is not the only parameter that the consumer should focus on. The choice of steel doors should be based on other parameters.

Taking into account your financial capabilities, you need to pay attention to the following technical characteristics:

Locking mechanisms. One lock is good, but good steel doors to an apartment should have two such mechanisms. Moreover, both must have a high burglary resistance class (3 or 4), and their mechanisms must be different. This approach will greatly complicate the work of burglars.
Additional protection. Such simple elements as a chain or a night latch should also not be neglected. They strengthen protective functions designs.
Door hinges. When deciding which metal entrance doors are best for an apartment, you need to pay special attention to this parameter. Hidden hinges are good because they are not visible and cannot be cut off during a break-in. However, this design significantly increases the cost of the product.
Insulating materials. Even steel doors without filler good quality will let in noise and cold. Therefore, it is worth clarifying what exactly the sash is filled with inside. The best option– mineral wool, capable of absorbing noise and cold. It is also good for residential premises because it does not burn.

Finishing material is important not only from a purely aesthetic point of view. It must protect the metal surface and be resistant to external factors, especially for private homes. After all, even the best steel entrance doors will be subject to sunlight, frost and precipitation. For an apartment, it is important that the coating is resistant to minor impacts and scratches.

Buying an iron door for your home is a responsible step. The product costs a lot and should last a long time. Therefore, you should carefully study the rating of iron doors to your apartment, all the parameters of the model you like, trust only well-known brands that have been on the market for many years and are ready to provide a long guarantee for their products.

It is rather stupid to explain the functionality of the front door - this is a thing that no private house or apartment can do without; perhaps the most important attribute security of personal housing. Of course, the degree of reliability of such doors greatly depends on the price segment. The cheapest models can only boast of a pleasant appearance - the protection functions here will be performed purely nominally.

In the case of more expensive doors, developers bother with both the design and reliability parameters, supplementing the design with stiffening ribs, and also using sheets of two millimeters and higher as a base.

The market segment of entrance doors is very extensive and includes a huge number of manufacturers. We decided to focus only on the best time-tested companies. We present to your attention the top 10 best manufacturers of entrance doors in two main categories. The final list was formed based on the following criteria:

customer reviews about use experience;
opinion of professionals;
extensive range of models;
degree of fame of the company.

The best manufacturers of entrance doors in the budget price segment

5 Outpost

Best price for products
A country: Russia (manufactured in China)
Rating (2019): 4.6

A company that was very popular until 2009. It began its thorny path not so long ago - production was launched in 1998. For 11 years, Forpost fought hard for profit, but in the already mentioned 2009, the management realized that the only way to reduce the cost of the door manufacturing process was to move production to China. From that moment on, things went uphill - products began to be “stamped” at 500 thousand copies a year.

In general, users are satisfied with the Chinese origin of the doors, but cases of break-ins or unexpected breakdowns overtake some at the most inopportune moments. This can be explained very simply - since the company moved to China, counterfeit copies under the “Forpost” trademark began to appear on the market.

Advantages:

low cost even for luxury doors;
good concentration of service centers throughout the country, adequate service;
A good choice is a wide range of entrance doors.

Flaws:

the fittings are suitable and supplied only from the factory;
Sound insulation fails in some models;
the presence of low-quality fakes on the market.

4 Groff

Premium quality at an average price
Country Russia
Rating (2019): 4.8

Groff is one of the official trademarks of the Bravo manufacturer, specializing in the sale of metal entrance doors. Strikingly different from classic products management company using exceptionally thick steel, reinforced structure with additional stiffening ribs, fire-resistant mineral wool produced by Knauf, as well as complete fittings (handles, locks, hinges, awnings, etc.).

The aesthetics of Groff doors match the high nominal quality, and are laid out in the early stages of design thanks to the work of in-house designers. Ultimately, consumers receive ready-made solutions for installation in apartments and private houses, the guarantee of long service life of which is confirmed by a ten-year period of mandatory maintenance from the manufacturers themselves. Of course, one of the most worthy candidates for a place in the ranking, both according to user reviews and expert opinions.

3 Bravo

Availability of products for various market segments
Country Russia
Rating (2019): 4.8

An indispensable leader in the domestic segment of entrance doors in recent times, the model range of which includes over 350 units original product. This catalog specifically presents doors created using modern 3D-Graf finishing technology, the cost of which is significantly higher than the market average.

However, there is an alternative option, the cheapness of which is due to the use of veneer. In terms of execution, the entrance doors of the manufacturer Bravo are not distinguished by abundance, but this is fully compensated by reliability and quality. The products of this company are successfully sold under other brands, such as Bravo Lux and BelDver, bringing the owner a good profit. Regarding user reviews, we can conclude the following: a number of models in the company’s budget segment have mediocre sound insulation, but all of them, without exception, provide reliable protection from drafts, which is determined by the use of good seals and insulating material with pronounced thermal functions.

2 Neman

The best combination of price and quality
Country Russia
Rating (2019): 4.8

A company that knows a lot about true security. It has a wide range of models and a very good price for its products. They care not only (and not so much) about safety, but about the appearance of the doors - their product clearly does not lack entertainment value.

In terms of reliability characteristics, everything is good - the doors are made of thick sheets of alloy steel and, without exception, are equipped with a double lock. But the number of locking elements can be increased at the request of the user. It is also striking that the buyer can choose accessories from other manufacturers - Neman’s sense of pride is far from off the charts (unlike some competitors).

Advantages:

availability of quality certificates for all main safety parameters;
reasonable cost of product lines;
abundance of design solutions.

Flaws:

not detected.

1 Became

The choice of users and professionals
Country Russia
Rating (2019): 4.9

From a purely technical point of view, the Stal company is similar to the premium manufacturer Elbor - their doors also have progressive burglary protection and good reliability characteristics in general. However, the main difference lies in the price category: if Elbor is focused on producing doors for all three price segments, then Stal does not have very expensive models in its arsenal. But there is well-deserved love from users, who all speak positively about the company’s products.

Professionals do not lag behind happy consumers, noting that although the company has some “flaws” in the form of unsuccessful models for apartments and private houses, it is still an exemplary mid-level manufacturer.

Advantages:

a variety of options for external door decoration;
compliance with all preferences and wishes of the buyer;
good service;
wide range of goods.

Flaws:

Some models are not of brand quality.

The best manufacturers of entrance doors in the mid-price segment

5 Fortus

Huge selection of do-it-yourself entrance doors. Over a thousand different style combinations
Country: Germany
Rating (2019): 4.7

The German giant in the production of entrance doors has one interesting trend that differs from the vast majority of its direct competitors. Instead of selling ready-made solutions They accept orders for the production of an individual product, assembled according to all the canons of their favorite childhood designers. Thus, consumers have access to a wide range of choices in terms of the number of door leaves, the complexity of the locks, their degree of burglary resistance, the color and material of the door leaf (metal, wood, combined) and the shape of the fittings, as well as the type of finish.

Through simple mathematical operations, we found out that there are over a thousand options for combining the parameters of entrance doors from Fortus. Consequently, any user will be able to find a door for both an apartment and a private house. According to numerous reviews, the products of this company have a high degree of reliability and do not suffer from problems with sound insulation and heat retention indoors.

4 Dierre

Great product design. Fast-growing range with a focus on cutting-edge developments
Country: Italy
Rating (2019): 4.8

Dierre is an Italian company producing reliable entrance doors, which is in the elite segment and does not need unnecessary formal introductions. Its main feature is complete reliance on advanced developments, introduced at every convenient opportunity into the design of products. Thus, recent trends have led to the creation of “smart” doors, with the function of locking and unlocking the lock using a remote control remote control(as an example, the Elettra model range).

The second important quality of doors from Dierre is compliance special style, maintained within the framework of moderate chic and delicacy. Any design of the door leaf is accompanied by the selection of unique fittings, which gives the product a touch of exclusivity and exclusivity (model At-3). Yes, the cost is very high, but the quality appearance and reliability completely compensates for this shortcoming.

3 Guardian

Aesthetic appearance
Country Russia
Rating (2019): 4.8

A Russian factory for the production of metal doors, which began operations in 1994. It deservedly enjoys the title of the best manufacturer of beautiful doors. Precisely beautiful, since the aesthetics of execution very often interests users in the first place. Regarding the reliability of the products, everything is also good - the door collections have a number of domestic and international quality certificates in the field of fire safety, sound insulation, burglary protection and operational strength.

But among the disadvantages, one can highlight the service that is not the most efficient: according to consumer reviews, malfunctions that arise during use (even minor ones) are eliminated over a long period of time.

Advantages:

adjusting the door and door frame to top level(gaps are minimal);
a wide range of products in all price segments;
product conformity high standards quality;
The main filling material is mineral wool board.

Flaws:

not the fastest service.

2 TOREX

Optimal balance of security parameters
Country Russia
Rating (2019): 4.9

The company, whose head office and assembly shop are located in the city of Saratov. Production facilities were launched in 1989 - almost before the collapse began Soviet Union. However, over just a few years, the company gained great popularity not only in the countries of the USSR, but also beyond their borders. At the moment, TOREX has eight warehouses in the CIS countries, from which, in fact, the main trade with the world occurs.

Among the positive features of the company, we can note good service, a huge variety of model ranges and the highest quality of each individual product. Of course, there is one drawback to all this, and it obviously lies in the high cost. But quality, as well as the peace of mind that comes with it, comes at a price.

Advantages:

excellent heat resistance (from 15 minutes to 5-6 hours);
compliance with all key safety standards;
wide range of goods;
in most cases - an attractive design.

Flaws:

high price and expensive service.

1 Elbor

High degree of burglary protection
Country Russia
Rating (2019): 4.9

You can hear a lot of flattering reviews about the doors of the Elbor company and, it is worth noting, very deservedly. The plant began operating back in 1976, but specialized far from the production of doors - in those days, all enterprises worked for the benefit of the defense power of the Land of the Soviets. It’s impossible to think of a better start - to reclassify the country’s defense industry to produce an almost defensive element of personal space. It is this fact that determines the high quality of metal entrance doors, the main merit of which is their almost complete immunity to burglary. However, in other aspects, the Elbor models also perform well. The only drawback is the high cost of the products, which essentially excludes the presence of doors in the lower price segment.

Advantages:

original design aimed at increasing the security of doors against burglary;
the main type of filler is mineral wool;
use of fire-resistant coatings;
excellent appearance in all five model series.

Flaws:

high cost of production.

How to choose a reliable entrance door

Choosing a good entrance door is a matter of responsibility and personal consciousness of each user. Of course, you can resort to the proven method “the more expensive the better,” however, if finances do not allow you to purchase a premium product, we recommend paying attention to the following characteristics to independently select an entrance door:

Basic number of locks. If you do not want to make an individual order, but have to choose from a limited number of models, give preference to doors with several installed locks. It is desirable that they represent fundamentally different mechanisms– if one of the locks is opened, there is a guarantee that the second one will create a problem for a conditional burglar.

Availability of additional locking elements. The optional inclusion of locks such as an ordinary latch (or, at worst, a simple chain) will be a pleasant addition and a bonus to protecting the door during a break-in attempt.

Type of door hinges. IN Lately Hidden hinges, embedded under a decent layer of metal for the same security needs against burglary, are especially popular. However, the installation of such elements increases the overall cost of the structure and work performed. Therefore, if you have limited budget, you can neglect hidden hinges (or save on other options).

Type of external finishing. A parameter responsible not so much for security as for the neatness of the appearance of the front door. Finishing with fabric and wood is acceptable for private houses, when safety is guaranteed already at the stage of entering the courtyard area. For apartments, preference should be given to metal doors with fire-resistant powder coating, which gives the doors additional strength.

Insulating material. The presence of an insulating filler determines the door leaf's ability to absorb noise and cold/hot air. The most optimal material is mineral wool, which almost completely absorbs external noise and ensures heat retention inside the corridor. Cheap doors have no filler at all.

The front door plays an important role in protecting the home from burglars, external noise and cold, and also serves as a decorative element in the apartment or on the facade of the house. When evaluating a product, it is important to take into account the thickness of the metal, internal filling and finishing materials, comparing all this with the cost. But in view large selection knowledge of the reputation of specific manufacturers will help set the direction of the search. It is better to choose entrance doors from the manufacturer that has the largest number of positive reviews from customers who have already tried their products, in combination with technical characteristics. The rating of manufacturers in Russia, divided into classes, will help with this.

The best manufacturers of economy class doors

To understand which company is better, you need to decide on the category and place of operation of the doors, because a model for a country house or a house will differ in cost and quality from a product intended for a cottage or penthouse apartment. Of course, one manufacturer may have doors from both the cheap and expensive segments, but here we provide full review most well-known companies divided into categories so as not to get confused.

For summer houses and for technical purposes, it is better to install entrance doors from the Russian Standard company, due to the very affordable price and acceptable quality of the coating. The cost of models starts from 3,900 rubles, and the canvases have a design with two sheets of steel and a polymer powder coating that can withstand rain and snow. The thickness of the sash reaches 70 mm, which allows it to accommodate several sealing contours and hidden adjustable hinges.

Similar products are produced by the Forpost company, which is better to choose for technical needs or placement at the general entrance to the entrance, because the manufacturer also produces double doors. They will also fit into an apartment, provided the entrance is locked and insulated. The plant uses steel with a thickness of 1.25 mm on the canvas and 1.5 mm on the box, polymer coating, 3 sealing circuits and two different types of locks.

The best manufacturers of middle-class metal doors

The middle class has a wide range of uses. These can be apartments, houses, cottages, offices of small companies. The best entrance door companies producing the most sought-after and popular category of goods in terms of price and quality are:

"Yoshkar Ola";
"Bulldos";
"Citalel";
"Ratibor";
"South".

For such companies, the initial cost of doors is 9,000-12,000 rubles, and the maximum reaches 30,000 rubles. For an apartment, it is better to buy an entrance door in the range of 10,000-15,000 rubles, which will have a thickness of an applied iron sheet of 1.2-1.5 mm, insulation made of polystyrene foam or polystyrene foam, high-quality powder coating, chrome fittings and external hinges with the ability to open 180 degrees. Armored adjustments must be installed on the locks, and anti-removal pins are installed on the side of the awnings. One part of the canvas is equipped with a decorative overlay made of MDF 6 mm thick, which decorates the overall appearance.

For a private home, where burglars have more opportunities to make noise with tools, and the canvas is affected by precipitation, it is better to choose models from the above companies in the price category from 15,000 to 30,000 rubles, which have thick MDF linings with moisture protection, multi-layer filling with cork and mineral cotton wool, thick sheets up to 90 mm with several sealing contours, mortise armored linings.

The best manufacturers of luxury doors

Here, the cost of products starts from 15,000 rubles, and in some factories from 22,000 rubles, and can reach 40,000-50,000 rubles. The best manufacturers of metal entrance doors stand out for their expensive finishes, high vandal-proof characteristics and good insulating qualities. Here is a ranking of popular companies:

"Groff"
"Lex";
"Zetta";
"Door Continent";
"Mastino";
"Senator."

Such doors are suitable for an apartment, house, cottage, office arrangement, or at the entrance to a restaurant or hotel. The product has several sheets of steel 1.5-2 mm thick, 16 mm MDF panels, decorated with relief milling and mirrors or moldings, from 2 to 4 contours sealing gum, cylinder and lever locks of burglary resistance classes 3 and 4, armor plates and anti-removal pins. The company uses mineral wool or rigid polyurethane foam as insulation. The thickness of the canvas can reach 100 mm and weigh up to 180 kg, therefore it is equipped with 3 hinges on bearings.

The Reliable Doors company has in its assortment products from all the above-described manufacturers. We understand well which company’s entrance doors are better depending on the place of use and other technical specifications. To consult with a specialist or clarify additional parameters for a particular product, it is convenient to use feedback.

Modern entrance doors must meet a number of requirements. Firstly, they must be reliable, secondly, beautiful and, thirdly, easy to use. Today, steel doors are produced by a variety of manufacturers. When choosing, you should definitely pay attention to the brand. Cheap models manufactured by little-known companies are unlikely to become an obstacle to uninvited guests.

What to consider when purchasing

Choosing the most suitable model doors, first of all, you should pay attention to:

thickness of the steel sheet used for manufacturing;
fabric design;
type of insulation;
design and number of locks;
presence/absence of platbands;
number and design of loops;
a type of eye;
appearance of the outer and inner panels;
manufacturer's brand;
price.

Of course, you should choose an entrance door depending on its future purpose. For the dacha, first and subsequent floors apartment building choose models that are slightly different in design.

What should the thickness be?

Good metal doors that reliably protect interior spaces from penetration using brute force, made of steel with a thickness of at least 1.5 mm. Imported designs with this indicator are considered to be of the highest quality.

They are made of alloy steel, which bends without breaking upon impact. Models made of hard metal should have a thickness of at least 2–4 mm. Products of this type are most often made by Russian manufacturers.

In addition to the thickness, when choosing a door, you should pay attention to the door leaf and frame themselves. The first must be made from one single sheet. The presence of welded seams in the canvas is not allowed, since such a structure can be easily broken using a regular sledgehammer.

It is best if the frame is made of solid strips of steel. Its prefabricated versions are less reliable. Only welded frames filled with cement mortar from the inside earned quite good reviews from consumers.

What should the canvas design be?

The front door leaf itself must be insulated. In this case, it is best if mineral wool or polystyrene foam is used as an insulator. In cheap models, instead of these modern insulation Often just corrugated cardboard is used. Of course, the microclimate in an apartment or house with such a fabric is unlikely to be good. Cardboard does not retain heat or any kind of extraneous noise.

It is quite difficult to determine how good a metal entrance door is in this regard. Navigate in in this case should primarily refer to the manufacturer's brand. It is better to buy models that have already earned good reviews from consumers. As a last resort, you can also ask the seller to unscrew one of the locks and look inside the canvas. Also, to check the quality of the door in terms of insulation and sound insulation, buyers sometimes simply knock on it. A good model does not “buzz”.

What should locks be like?

Breaking into metal entrance doors is done, for the most part, not with the use of brute force, but “in a cunning way.” That is, using a master key and other similar devices. Therefore, special attention should be paid to the quality of locks when choosing. Only door designs have earned good reviews from consumers, equipped with at least two locks. In this case, one of them must be cylindrical, and the other - level.

You also need to look at how many bolts are in the locks. IN good models there should be at least 4 of them. Judging by the reviews of experts, locks can be considered reliable only if the overhang and thickness of the bolts are at least 20 mm.

Hinges and trims

The number of hinges is determined primarily by the weight and intensity of use of the door. For a model intended for installation in a city apartment or residential building, 2-3 pieces will be enough. The design of the hinges is required ball joints must fit. These elements significantly increase their wear resistance. Without them, the canvas will soon simply sag.

And, of course, the hinges must be hidden by the platbands. Without it, breaking the door becomes very easy. The hinges of models without platbands can be easily cut with a grinder or some other tool. The platband is especially relevant for structures installed in suburban areas. country houses. It is also very good if the door is equipped with hidden hinges and anti-burglary pins.

Appearance

Of course, there must be a peephole cut into the front door leaf. And it will be very good if it is panoramic. As for the appearance of the canvas and frame, in this case the choice depends largely on the taste of the owners of the house or apartment themselves. But of course, it’s worth paying attention to the degree of practicality of the cladding in any case.

The finish should be good enough resist various types of mechanical stress and unfavorable factors environment. This is especially true for doors intended for use in country houses. Best Reviews Summer residents have earned models with anti-vandal powder coating.

As for the interior decoration, it, of course, should fit as harmoniously as possible into the interior of the hallway. Today on sale there are door designs with removable internal panels. The finish of these models can be changed.

Manufacturer's brand

This parameter is considered perhaps the most important when choosing an entrance door. In no case should you buy, for example, cheap doors made in China. Such models are usually made of very low-quality and thin steel.

The thickness of the metal of the leaf and frame in most cases does not exceed 0.6 mm. For comparison: regular tin cans have approximately the same thickness. That is, you can open a Chinese-made front door not even with a crowbar or a grinder, but with a simple can opener.

Such models also deserve bad reviews for the very low quality of the insulation. Expanded polystyrene and mineral wool The Chinese practically do not use sheets for insulation. Most often they are insulated completely useless corrugated cardboard. The quality of locks in Chinese models also leaves much to be desired.

The best reviews on the Internet are available about metal entrance door structures made in Russia and Poland. The most popular brands are:

"The Guardian";
"Condor";
"Thorex";
"Outpost";
"Elbor";
Galant;
Novak.

Guardian models

Reviews of metal entrance doors of this brand are good, primarily because these models are characterized by increased strength and burglary resistance. The advantages of the designs of this manufacturer also include:

multi-layer keyhole protection;
high-quality powder coating of the canvas;
environmental friendliness of materials used for insulation;
the possibility of individual selection of not only the design and size of the canvas, but also locks, as well as other accessories.

Guardian doors are produced by the Russian company of the same name.

Models "Elbor"

These metal entrance doors have also justifiably earned popularity among domestic consumers. Models of this brand are manufactured at the factories of the Russian holding Elbor. Their main advantages include:

reliability;
easy to change decorative panels;
an ingenious multi-point locking system;
the presence of an additional armor package.

Another advantage of the designs of this brand is the ability to hang the canvas on any side.

Condor models

At not too high a cost, the products of this company are of simply excellent quality. Thermal insulation in these door structures is achieved using mineral wool. The canvas and frames are covered resistant to adverse influences external environment paint coating. For those who want to purchase quality door for your home and not overpay, you should definitely pay attention to this option.

Torex models

The metal doors of this Russian brand use not mineral wool as insulation, but expanded polystyrene, which is resistant to moisture. Therefore, Torex models are well suited for installation in country houses.

In some cases, they are installed even in the absence of a vestibule. But experienced summer residents It is still recommended to build the latter. In any doors of the mid-price category locks due to condensation in winter time may freeze. Only very expensive imported models designed specifically for country houses are free from this drawback.

Products of the Forpost company

This company is one of the leading door manufacturers in Russia. The main advantage of Forpost brand models, in addition to reliability, strength and durability, is the presence hidden loops. It is very difficult to cut such a canvas from a frame. Also, the models of this manufacturer have earned good reviews for their attractive appearance. “Forpost” products look really beautiful and fit well into the interior of almost any hallway.

Polish Galant models

This manufacturer also uses reliable armor plates to protect locks from burglary. The undoubted advantages of doors of this brand, among other things, include impeccable solid appearance and not too high a cost. The porch of the Galant models is equipped with additional protection, and the threshold is made of stainless steel.

Novak products

The advantages of doors of this type, about which there are also many positive reviews, include, first of all, the high reliability of the door leaf and the presence of additional protection for the narthex. Besides, popularity of Polish models "Novak" deserved thanks to the presentable design of the canvas and frame. They cost not much more than Chinese ones, but their quality is quite good.

Many people do not speak very well of the Saratov Torex doors. But in fact, people have a bad opinion of them mainly because of not very conscientious installers. The doors themselves of this brand are quite good and reliable. Mine has two locks - the main one of the 4th protection class and the additional one of the 2nd. The frame and canvas are quite powerful, and mineral wool is used for insulation. Additionally, the canvas is filled with foamed polyurethane. Therefore, it practically does not allow cold, as well as extraneous noise, to pass through. Overall, a very good door for the price.

Valery Petrovich

We recently installed a Russian “Forpost” door in our house. So far we are pleased with its quality. Looks beautiful and solid. Our door has a universal lock. Yes, it’s convenient, but I still think this detail is unnecessary. They write on the Internet that some “Forpost” door installers know about the presence of this function and sometimes take the path of crime, breaking into other people’s apartments. Otherwise, we are completely satisfied with the door.

Stanislav Kochetkov

How to choose a metal door

The base of the metal door is made of aluminum or steel. Steel structures more durable, provide high-quality noise and heat insulation.

Aluminum sheets are lightweight and therefore easy to install. This material allows for many finishing options.

Pay attention to the way the door opens. It is better to choose designs that open from both the left and the right side. Whether you choose external or internal doors depends on your taste preferences.
Take into account the technical characteristics of the model, because it will constantly be under mechanical and temperature influence. To ensure the product retains its appearance longer, choose powder coating or oak paneling.
The level of noise and heat insulation are important criteria. As a rule, a metal door is insulated using mineral wool, polystyrene foam, and corrugated cardboard.

An ordinary plastic or glass structure, but for residential premises you will need something more serious, the same wooden or hardware. Those for whom a high level of burglary resistance is very important should choose armored models; steel options with two locks and internal hinges can also be considered.

As our rating shows, the cheapest is the plastic model. Wooden and glass products, and already the most expensive, of course, are metal constructions. They can be called the best entrance doors for home and office in 2017, because they are relevant for both the street and indoors.

"Elbor"

excellent quality of steel used;
high level of reliability (up to 22 sash fixation points). Some doors have an additional armor package;
several series with different configurations, which makes the choice easier;
long-term warranty (years): for locks – at least 6, for leaves – 3, which confirms the manufacturer’s confidence in the reliability of its products;
own production of accessories;
absence of intermediaries in the company-consumer chain. Having a network of its own specialized stores allows Elbor to keep prices at an acceptable level for most customers.

All this together allows the company to firmly hold everything last years leading positions among numerous manufacturers (both domestic and foreign) of metal entrance doors.

The best metal door with a thermal break

NORTH is used in harsh winter conditions, withstands temperatures down to -39 degrees, vulnerable areas are reliably sealed with contours. The thickness of the canvas is 80 mm. The design is reliable as it is equipped with 10 locking points.

The average weight of the model is 100 kg. The stylish design and beautiful appearance are ensured by the polymer powder coating of the model. The door is simple to install, easy to maintain, wear-resistant and durable if used correctly.

Characteristics:

weight – 100 kg;
dimensions – 860 by 2050 (960 by 2050) mm;
2 sealing circuits;
10 locking points;
canvas thickness – 80 mm;
polymer powder coating.

the structure does not freeze, there is no ice;
reliable protection system against penetration;
multilayer insulation system;
functionality;
thermal resistance;
wear resistance and durability;
average weight, transportability;
high-quality fittings, reliable fastenings;
convenient installation and maintenance of the door.

"The Guardian"

The models of this company enjoy authority not only here, but also abroad. Evidence of this is the numerous awards of the quality mark. Many experts agree that among all the doors in Russia, Guardian stands out for its elegance of design and variety of assortment. What is characteristic of these products?

Double-circuit seals.
Increased strength of the canvas, which is ensured by the original configuration of the stiffeners (in the form of trapezoids).
Wide range of prices for models. That is, Guardian products are available to the widest segments of the population, regardless of income level.

The doors of this company rightfully occupy 1st – 3rd places in various manufacturer ratings.

The best metal door with thick leaf

Trio Metal canvas, insulated with mineral wool, thickness – 80 mm. The model is sealed with three contours in places that wear out quickly. Hinges on bearings ensure the door opens 180 degrees, and the peephole provides a wide view.

The design includes 2 locks and a night bolt. For interior decoration, a moisture-resistant PVC coating in the color of bleached oak is used. A product with reliable burglary protection, high heat and sound insulation.

Characteristics:

canvas thickness – 80 mm;
dimensions – 2050 by 880 (980) mm;
the canvas is filled with mineral wool;
three sealing contours;
MDF panel finishing;
door with special powder coating;
fittings (2 locks, night bolt, hinges, peephole, handle).

resistance to mechanical damage and atmospheric influences;
high thermal insulation characteristics;
convenient equipment, reliable fittings;
stylish and high quality interior and exterior finishing.

weighty and large-sized product.

The best metal door made in Belarus

Veldoors Chocolate design is available in two sizes. The door opens from both sides. Beautiful design and high-quality finishing using PVC. The simplicity of geometric shapes and dark chocolate color give the design elegance and special charm.

Characteristics:

dimensions – 860 by 2060 (960 by 2050) mm;
2 sealing circuits;
filler – ISOVER mineral wool;
covering – structured MDF panel;
fittings (2 hinges with bearings, 2 locks, night bolt, anti-removal pins).

Possibility of opening from the right and left sides;
environmentally friendly insulation;
external and internal finishing of MDF;
compaction of vulnerable areas of the metal sheet;
the main lock is protected by an armor plate;
stylish design;
high quality headset.

difficulty in care;
accumulation of dust.

Best metal soundproof door

The design of LEGANZA FORTE ideally combines aesthetic appearance and high quality: sound insulation, insulation. Adjustable hinges prevent the door leaf from sagging. The product has reliable burglary protection, the exterior is powder coated.

Characteristics:

modular layout;
canvas thickness – 60 mm;
5 stiffeners;
double porch;
weight – 85-115 kg;
maximum opening size – 1020 by 2300 mm;
fittings (hinges, locks).

anti-corrosion protection;
locks with recoding;
built-in protection against the most popular hacking methods;
high sound and heat insulation;
equipped with adjustable hinges that prevent the fabric from sagging;
convenient and practical design.

large door;
low transportability.

"Outpost"

The “highlight” of these entrance doors is the only hidden hinges. They are purchased mainly for private buildings, especially those located outside settlements. It is impossible to enter a home by cutting off the awnings. In addition, the package includes high-complexity locks. The variety of finishes allows “Outpost” to fit organically into any opening.

Domestic doors under the brands “Stal”, “Legrand”, “Granit”, “Buldors”, “Lex” have also proven themselves quite well. The latter are produced both in the Russian Federation and in China - it’s worth taking into account. Reasonable cost, variety of models, original design- Here business card products from these manufacturers.

The best apartment metal door

The design of Akron 1 is reliable, wear-resistant, durable. The doors are made of metal sheet 65 mm thick and provide good sound insulation. In vulnerable places they are sealed with special contours.

Reliable protection is provided by fittings: hinges, locks, anti-removal pins. The door has a Guardian 10.11 main lock with a second class of burglary resistance.

Mineral wool is used as a filler; the material is environmentally friendly and safe for health.

Characteristics:

canvas thickness – 65 mm;
filler – mineral wool;
2 sealing circuits;
reinforcement of the canvas in unreliable places;
accessories (locks, anti-removal pins, hinges).

burglary resistance;
dense fabric provides excellent sound insulation;
reliable fastening of accessories;
strength and wear resistance;
durability subject to operating rules;
high sound insulation.

On a note

When choosing doors, you need to consider the following points.

Ratings of the best manufacturers cannot be called as objective and impartial as possible. They are made up of people, and each of the specialists and users (whose reviews are taken as a basis) has their own priorities in the foreground. That is why the same companies are in numerous tops in different positions.
Unfortunately, fakes are everywhere. Entrance doors are no exception, especially from manufacturers who are just gaining authority and are not yet well known.
It is no secret that individual ratings are custom-made. Consequently, the reliability of such information should raise certain doubts.

And the conclusion is simple - in order to choose a truly high-quality model, you should not focus only on the manufacturer of the front door. You need to know yourself how to distinguish a good, reliable and durable product from a low-quality one.

What to evaluate:

Metal thickness (mm). For imported models - at least 1.5; for domestic ones 2.5.
Canvas. Only whole. If it consists of separate fragments, the door is easily destroyed. For example, a couple of blows with a sledgehammer are enough to break open such a door.
Frame. It is necessary to pay attention to the number of welds; maximum – 4, in the corners. If the jamb is made of several elements fastened around the perimeter, then there is no need to talk about the reliability of this design. For the best entrance doors, the profiles are filled with cement mortar, for amplification.
Insulation material. Acceptable options are mineral wool, polystyrene foam. It's quite easy to check; you need to lightly tap on the canvas. If the result of such testing is the absence of the “buzz” characteristic of metal, then this is a sign of a high-quality heat insulator, in contrast to the embossed cardboard that is used in cheap (usually Chinese) models.
Locks. At least two, and they must be of different types: cylindrical lever.
Rigel. Their reliability is assessed by their reach and diameter (you can focus on 20 mm; that’s quite enough).
Canopies. The more massive the sash, the more there should be. For a reliable metal door installed at the entrance to a private house, at least 3. It is worth paying attention to the design of the hinges. Products with ball bearings, and of a hidden type, are considered the most durable. Cutting them off definitely won't work.
Surface finishing. For metal entrance doors, hammer coating is considered the best option. It is inert to all atmospheric factors, including ultraviolet radiation. Such a model will last, regardless of the specific climate, for quite a long time without repair or reconstruction.

Products from Finland, Italy, and Germany are much more expensive than Russian metal doors, but in terms of reliability and durability, according to users and professionals, they are no better. Therefore, they reasonably note: before purchasing such imported models, you should think carefully about whether it is worth overpaying for just a well-known brand, if in practical terms there is no difference.

Best metal door with MDF finish

The design of the Profdoor-MD10 is heavy and large sizes, suitable for decorating the entrance and front doors of an apartment. Thanks to the built-in stiffening ribs, the elastic metal sheet becomes reliable and durable.

The door is equipped with a reliable security system, there are lower and upper locks, and a peephole. The noise and heat insulation of the model is at the highest level; this design will bring comfort and coziness to the house. MDF finish is used to create a natural effect.

Characteristics:

dimensions – 200 by 80 cm;
weight – 70 kg;
2 pyramidal stiffeners;
MDF finishing;
reinforcement with profile pipe;
noise and thermal insulation of the door vestibule;
accessories (two locks, peephole).

the structure is protected from outside penetration;
high-quality insulation of the model;
high sound insulation;
Stiffening ribs ensure wear resistance and reliability of the structure;
MDF finishing brings the model closer to a natural design.

The best metal door for a private home

Wear-resistant Arma Standard-1 is a dense design with two sealing contours. To make the door, a bent metal profile with stiffeners is used. The product is equipped with a cylinder and lever lock, a peephole, and chrome-colored fittings.

Reliable protection against burglary is provided by anti-removal pins. The metal door is powder-painted and resists corrosion and mechanical damage. Although the design is heavy, it opens easily and without unnecessary sound effects.

Characteristics:

canvas dimensions – 880 x 2050 mm;
thickness – 80 mm;
filler – mineral cloth “URSA GEO”;
MDF finishing;
external powder copper coating;
fittings (sealing contours, hinges, pins, night bolt).

large thickness of metal sheet;
high level of sound insulation;
high-quality filler, high-quality insulation;
reliable protection against burglary;
Possibility of opening on both sides;
beautiful appearance, stylish design;
convenient equipment.

The best metal door for technical rooms

2DP-1S are installed in buildings and public places and are made from high-quality and wear-resistant materials.

The door is designed taking into account the latest technologies, equipped with reliable burglary protection and fire resistance. Two types of seals are used. Stylish design and beautiful powder coated finish.

Characteristics:

dimensions – 1400 by 1000 (2350 by 1750) mm;
external finishing with powder-polymer coating;
two contours of rubber seal, thermally expanding seal;
design of the box (with or without a threshold, in the overhead or in the opening);
equipping with fire-fighting mechanisms;
fittings (crossbars, locks).

high technical safety;
several design options;
high-quality external finishing, beautiful design;
reliable insulation;
supply of fire safety system.

quite heavy design;
difficulties during transportation.

The best double leaf metal door

DZ-98 is designed for wide doorways. The weight is distributed approximately equally on both parts of the door leaf, so the load on the hinges is significantly reduced.

The design is strong, wear-resistant and durable. The fittings include two locks and a peephole with a 180-degree view.

Characteristics:

type – front double doors;
dimensions – 2000 by 800 mm;
finishing (powder coating);
equipped with top and bottom lock;
number of loops (2);
insulated with mineral wool;
equipped with a peephole with a 180 degree view.

uniform load distribution;
reliable protection against penetration;
wear resistance, durability;
stylish design and good finish;
the structure is insulated;
convenient equipment.

Only suitable for large openings.

The best metal door with internal opening

DS-7 is intended for installation in office and residential premises. The structure is made of one-piece bent door leaf (two metal sheets, 4 stiffeners). The product is equipped with locks of burglary resistance classes 3 and 4.

Wear-resistant design with two sealing contours, insulated with environmentally friendly mineral wool. Stylish design, wide choice for decorative finishing. High-quality accessories will give reliable protection, comfort and coziness.

Characteristics:

4 stiffening ribs;
dimensions – 2000 by 880 (2100-980) mm;
two seal circuits;
the structure is insulated with mineral wool;
fittings (hinges, peephole, lining, handle).

wide range of decorative finishes;
environmental Safety;
high-quality fittings;
insulation with mineral wool;
5 available sizes;
the design is wear-resistant and durable;
burglary protection (class 3 and 4);
durability and reliability.

there are no anti-removal clamps.

Which company is better to buy doors for home and office?

This rating is a rare case when products from predominantly Russian manufacturers are presented. But despite this, the prices for the goods are quite high. The most expensive is Torex, followed by the Kaski brand, and the Guardian and Forpost companies offer more reasonable prices.

We have selected 5 confident leaders who have been working in the market for a long time and effectively:

Torex is one of the oldest companies, having released its first product in 1989. In 2016, its products received the “21st Century Quality Mark” award. The brand's catalog includes business class options, with enhanced protection and increased insulation.
PolotskStroyService– the company began its activities in the 90s, it constantly participates in various specialized exhibitions and has been recognized more than once as the best in its field. Unlike many other manufacturers, it has its own woodworking shops.
Brusbox is the largest manufacturer of PVC profiles, window and door systems made of plastic is something to be proud of. He is the holder of a prestigious diploma from the international interior and construction exhibition “BATIMAT”. Its products have a fire certificate and a satisfactory sanitary and epidemiological conclusion.
Kaski (Fenestra) - the plant is located in Finland; in 2014 it came under the jurisdiction of Kaskipuu Oy. At the same time, the company was named the best manufacturer of insulated entrance and balcony doors.
Outpost - the company has been creating mainly steel modifications since 1998. It all started in Kaliningrad, at the Masterlo plant. Today, all goods are supplied from China, but Russian experts participate in production process, as before. The brand has both regular modifications and enhanced ones that surpass the first models in terms of safety.

Each manufacturer on our list has official retail chains in major cities Russia and other CIS countries.

Let's compare the main technical characteristics of the models to find out which of them are best suited for equipping an apartment or house.

The thickness of the metal sheet must be at least 2-3 mm; the designs presented in this rating correspond to this indicator.
Let's pay attention to the thickness of the canvas; there are models with high (80-90 mm) and medium (60-70 mm) parameters. To support the shape of the metal sheet, sealing contours and stiffeners are used.

Among the best doors– North, Trio Metal.

An important criterion is the level of heat and noise insulation, which depends on the thickness of the door leaf and the insulation used. All structures from the rating are insulated with environmentally friendly mineral wool.

The anti-corrosion model LEGANZA FORTE has excellent noise insulation.

We pay attention to the quality of the fittings: locks, hinges, door handles. Buy models Akron 1, Arma Standard-1, they are equipped with the necessary accessories.
The security system determines how protected the structure is from hacking. Products with high-quality protection – LEGANZA FORTE, North, Profdoor-MD10.
The finish of the products is varied, models with powder coating (LEGANZA FORTE) and MDF (Trio Metal) are available.

All models are different stylish design, the most original is Veldoors Chocolate.

So, among the best models are Sever, Trio Metal, Veldoors Chocolate, LEGANZA FORTE. These are products with high wear resistance of the metal sheet, good sealing and insulation, a reliable protection system and good external finishing.

Sections