Pouf sizes. DIY ottoman - a multifunctional small interior item

Pouf is a soft low stool. But the diminutive form of this word has taken root in the lexicon - ottoman. For those who decide to try making upholstered furniture themselves, an ottoman is the easiest option. This article will give you step-by-step instructions on how to make an ottoman.

Options

Ottomans are made various forms and materials exterior finishing. For a small hallway, you can make an ottoman with a built-in cabinet for storing shoes; for a child’s room, a soft ottoman.

The pouf looks very respectable as part of a furniture set made of leather. Photos of various ottomans, including self made presented on this page.

Frameless ottoman

The idea of ​​how to make an ottoman without spending a lot of money can be realized by making it from scrap materials. For example, a soft frameless ottoman made of fabric.

To make it you will need:

• Thick fabric
• Zipper closure
• Sewing machine
• Whatman paper for patterns
• Padding material

First, we make a pattern for the top and bottom of the pouf. On whatman paper we draw a circle with a diameter of 35-40 cm. Do not forget about the seam allowances. Transfer to fabric and cut.

Next, cut out a rectangle from the fabric equal to the circumference of the ottoman seat. For a diameter of 40 cm, the circumference is 126 cm. The width of the rectangle will be equal to the height of the finished ottoman. Don't forget about seam allowances.

We sew the rectangular pattern first to one circle, then to the second. We sew in a zipper. Stuff it tightly and the ottoman is ready.

The sizes given in the description are not dogma, choose them to your taste. If there are no solid pieces of fabric, sew the necessary parts from various pieces of fabric. The best option A DIY patchwork style ottoman will get a lot of likes on social networks.

Ottoman "Pear"

“Pear” is another option for a frameless pouf. It uses polystyrene as a filler. It's basically a bag with foam inside. It is very comfortable to sit on such a chair because it takes the shape of the body. Our site will tell you how to properly sew a bean bag ottoman from scrap materials with your own hands and what you need for this.

Unlike the previous version, the pear ottoman is made of two bags. They are inserted into each other, and the filler is poured. If necessary, the top cover can be removed and washed.

The filling bag is made of dense fabric, such as jacquard. The outer cover is made from a variety of fabrics - get creative with it.

For each cover you will need fabric 1.5 m wide and 2.2-2.5 m long. You will need two zippers. For an inner bag – from 40 cm, for an outer bag – 1 m.

The filler is polystyrene. This is a harmless, hypoallergenic filler. Polystyrene is sold in stores for frameless furniture.

If you make a pear ottoman to the maximum budget option, then packaging foam can be used as a filler. Pieces of foam crumble into small balls, but this is a troublesome task.

Styrofoam balls stick to everything and fly apart at the slightest movement of air. Only a vacuum cleaner will help to restore order in the room where foam plastic was crumbled. One ottoman requires 120-140 liters of polystyrene.

Note!

Using a paper pattern, we make blank parts and sew bags. Then, fill the inner case with filler. We put on the top cover and fasten it. Ready.

Padding

Another way to make a new item upholstered furniture, this is to update the upholstery of the old one. Selection of fabrics in retail stores furniture components big. You will find information on how to beautifully cover an ottoman with your own hands on our website.

For reupholstery you will need following materials and tools:

• Upholstery fabric
• Foam rubber - may be needed if the old one begins to collapse
• Stapler, staples
• Sewing machine
• Scissors, knife, measuring tape

We disassemble the old ottoman and remove the staples securing the fabric. We carefully rip out the old upholstery, it will serve as a template for the pattern of the new one. In addition, using old upholstery you can calculate required amount new fabric. We evaluate the condition of the foam rubber.

You can sew new upholstery according to the measurements of the old one and simply cover the ottoman. Or you can give the ottoman a new design, add folds, stitches, and ties to the upholstery. This will require a little more fabric.

Replacing foam rubber

If the old foam rubber begins to deteriorate, it is easy to replace. To do this, you need foam rubber of appropriate thickness. Better fit foam rubber with a density of 25-30 kg/m3.

Note!

Draw the outline of the ottoman seat on the foam rubber and cut it out with a sharp knife. In furniture production, foam rubber is glued with specialized glue. At home, you can use any glue that does not contain toluene.

Ottoman with lid

A pouffe with a lid is very convenient for storing things. To make it yourself you will need simple tools, available in the arsenal of any home handyman: jigsaw, drill, stapler. You can find diagrams and drawings on how to make an ottoman with a lid on our website.

Conclusion

Making a soft ottoman at home is very simple. This does not require production capacity or expensive equipment. And the master classes on our website will help you with this.

Photos of do-it-yourself ottomans

Note!

How about minimal investment? You can make a designer ottoman with your own hands, which, in addition to decorative function, solves several practical problems. This is a rather unusual accessory that immediately attracts attention. Showing a little creative imagination, you can make a completely unique product from old tires or suitcases, and the addition of wheels will make the design also mobile. Today, the editors of the online magazine site will hold several master classes on making an ottoman from unusual things, with the help of which you can make first simple, and then more complex and unusual interior items.

The ottoman came to us from the East; they don’t use it very often there, preferring to sit on small structures. It quickly gained its popularity due to its mobility and versatility. The main advantage of the design is that it is easy to make yourself from old things that you decide to recycle. Today you can buy a beanbag or a rigid frame ottoman of any design and finish. But why shell out money for something that you can easily do yourself in just 1-2 hours?

Unconventional ideas for making your own pouf from unusual objects

Manufacturers produce a wide variety of ottomans: for a child’s room, hallway, bedroom, and even for country holidays. They are offered at a fairly high price, but why spend personal finances on something that you can do yourself? And for this you don’t need to be a professional at all, just show a little imagination and follow our instructions.

Step-by-step instructions for making your own ottoman from plastic bottles

The easiest way to make an ottoman is from plastic bottles. You must first prepare the following materials:

• plastic bottles - 14 one and a half liter pieces;
• transparent tape;
• plywood sheet;
• material for, decor;
• double sided tape.
• thin and thick foam rubber or .

Advice! First you need to unscrew all the caps and leave them in the cold overnight or put plastic bottles in the freezer. The next morning, immediately screw on the caps and place them under the battery. In this simple way, the strength of the bottles increases.

Step-by-step photo description of making a pouf with your own hands from plastic bottles.

Illustration	Description of action
	Connect with an elastic band 2 times for 2 bottles, 2 times for 3 bottles and 1 time for 4 plastics. Then secure the structures with tape.
	Connect the entire structure together and fasten it.
	Cut 2 ovals from plywood according to the size of the bottom of the ottoman, make them with outside small notches. Glue thick fabric onto one oval - this will be the bottom of the structure.
	Glue the plywood to the structure top and bottom using double-sided tape.
	For greater strength, tie the ovals with twine along the notches.
	Wrap thin foam rubber around the ottoman and sew with thick thread.
	Cut out the top of the structure from wide foam rubber.
	Sew the seat to the foam sides.
	Sew a cover from bright fabric, pull the cord along the bottom base and put it on the workpiece.
	The finished product weighs no more than a kilogram.

You can watch the master class in more detail in the video.

Related article:

Photo examples, drawings, diagrams, materials; Features of manufacturing furniture for the garden, children's room, bathhouse, gazebo, tips and recommendations from craftsmen - read in our publication.

Ottoman for a children's room made of plastic, 20 liters

If you have a 20-liter bottle left, you can use it to make one for the youngest children. For this you will need:

• 1 twenty-liter and 4 one-and-a-half liter plastics;
• scotch;
• fabrics and decor.

The work is performed as follows;

1. Cut off the top of a 20-liter plastic.
2. Insert one and a half liter bottles into it, which will act as legs.
3. Next you need to decorate the workpiece. To do this, you can use dense soft cloth, colored tape, fur, options depend on your imagination.

The nuances of making a tire ottoman with your own hands

You can make a creative ottoman with your own hands from an old wheel. It is quite heavy, so or is more suitable. In addition, this is a great option for or. The manufacturing procedure is as follows:

1. Wash the tire thoroughly and dry it.
2. Cut 2 circles from plywood, the diameter of which is equal to the diameter of the tire.
3. Drill several holes in both pieces of plywood and tighten.
4. Starting from the center of the structure, glue the twine in a circle in the shape of a snail.
5. In order for the ottoman to be left outside, it should be varnished.
6. For mobility, wheels can be installed on the bottom side.

More detailed master class on making an ottoman from old tire you can watch it on the video.

How to make a pouf from an old plastic bucket

If you have an old plastic bucket, you can also transform it into a soft seat. To work you will need:

• measuring tape;
• chalk or a piece of dried soap;
• glue;
• stapler;
• foam rubber and non-woven fabric;
• textile.

Before you cover the ottoman with your own hands, you need to measure the diameter of the bottom and top of the bucket. Next, the operating algorithm is as follows:

The finished ottoman will become a real decoration of any interior.

You can watch the video in more detail about the process of making an ottoman from an old bucket.

Related article:

: what is it, advantages and disadvantages; step by step production coffee table, armchairs, sofas, benches, racks; decor features with photos - read in the publication.

Non-standard solution: do-it-yourself ottoman made from a cable reel

A comfortable child seat can be made from an old electrical cable reel. To work you will need:

• padding polyester;
• glue gun;
• braid for decoration.

Progress:

Interesting ideas for making poufs for the bedroom

Soft frameless poufs are perfect for the bedroom, which, in addition to their functional load, also act bright accent in the interior, photo examples are proof of this. And if you use expensive fabric for decoration, the soft construction will emphasize the owner’s wealth and taste.

How to knit a round pouf

Needlewomen can please their family with their creativity and knit a cover for a bag with filling. This is a great addition to stylish interior, issued in . You should first sew the bag, fill it with foam rubber, and then begin the main work. Master class on making a knitted ottoman with your own hands:

1. Tie two circles, their size should correspond to the diameter of the bag.
2. Sew the edges of the blanks to the middle.
3. Sew a zipper into the hole.
4. Place the cover on the bag and fasten the zipper.

Another interesting master class You can watch the video on how to make a knitted ottoman.

The nuances of making a soft frameless square pouf

The work procedure is practically no different from making a round pouf, only the templates should be prepared in a square shape. Each part must be knitted separately, the inner cover must be sewn, into which the filler must then be poured. You can also make a frame model, for example, from, which is covered with foam rubber and decorative fabric. For a more detailed master class on making a pouf from pallets, watch the video.

How to sew a frameless pear-shaped pouf with a soft back

A modern accessory that many families love so much is the pear bag. To make a soft ottoman with your own hands, you need to master the sewing technique. Before work, prepare the following materials:

• upholstery fabric size 320x150mm;
• smooth material for interior decoration– 300×150 mm;
• filler. It is advisable to find expanded polystyrene with holofiber with a volume of about 1 m³;
• zipper with a length of at least 60 cm;
• pattern paper and thread.

The manufacturing procedure is as follows:

Work for half an hour or how to sew a pouf in the form of a bag

You can sew a bag of any shape from beautiful fabric. To work, you should prepare a flowing fabric for the inner cover and beautiful material for the outer surface. Before you sew a bean bag ottoman with your own hands, you need to make patterns for 4 sides, the bottom and top, photo ready-made solutions will help you choose an interesting design.

Then transfer them to the fabric and cut them out taking into account the seam allowances. After this, sew all the fragments of the inner cover, leaving a small hole into which to pour the filler. All manipulations can be carried out with decorative fabric, the patterns of which can be made according to the same patterns.

How to properly assemble and finish soft square and round ottomans on a rigid frame

More complex work will require a little more time and skill. carpentry. But there is nothing difficult in such work, just look at a few of our step-by-step instructions and you can do everything yourself.

Detailed instructions for making a square soft ottoman on wheels with a drawer for small items

With a little work, you can make a more solid design - a square ottoman with a removable lid on wheels. This is also an additional toy, and you can also store slippers for guests in it. For work you will need the following materials:

• sheet of plywood 12-16 mm thick. Sizes are for children and adults;
• wooden block 20×40 or 40×40 mm;
• wheels;
• piano loop;
• foam rubber for soft seat up to 100 mm thick;
• padding polyester;
• upholstery fabric;
• carpentry;
• glue.

An ottoman up to 40 cm in height is suitable for children, and up to 55 cm in height for adults. In the table we have prepared the dimensions of the parts for an ottoman intended for children and adults.

Step-by-step manufacturing process

Second life of an old stool

Do not rush to throw away an old, but still strong stool. Just a couple of hours and you will add an interesting designer piece of furniture to your interior. The manufacturing process is as follows:

Detailed master class on making a pouf on a wooden frame

This ottoman can be made of any geometric shape. Let's consider one of the most simple ways: making a round product. For this we need:

Secure the blocks with self-tapping screws along the previously drilled holes.

Secure the plywood to all the blocks with a stapler.

Wrap the structure with padding polyester and cut a circle out of foam rubber for the lid. Secure everything with glue.

Secure the wheels.

Conclusion

Making an ottoman with your own hands is not at all difficult. To begin with, you can practice simple designs. In the process of work, creative inspiration will appear, which will help you create more complex things. Unique items made by yourself will always be a bright accent in the house, delight loved ones and surprise guests.

We hope that our instructions will be useful to you, and you will soon delight your family with a new invention. Have you ever made ottomans with your own hands? Tell us in the comments what model you have already made or are planning to make. And finally, we offer you to watch a master class on making a large ottoman with a carriage tie.

How to make an ottoman with your own hands without throwing money away? Of course, you can buy it in a furniture store, but looking at the cost of a simple chipboard product, you will want to do crafts at home. If we consider furniture sets as a whole, then most of them belong to rather complex structures.

You can do something from this list with your own hands experienced craftsmen, and only the ottoman is made without special skills and knowledge from improvised means. A practical item will be obtained when you choose a durable and high-quality upholstery fabric that can be wiped, cleaned, and washed.

Such materials include leather or furniture fabric sold in specialized stores. All that remains is to view step by step instructions for the manufacture of ottomans of various shapes.

So:

• An ottoman for seating several people is comparable in height to an armchair and more like a soft bench. For the home, such a model is inconvenient and unnecessary, but in fitting and waiting areas it is very relevant.
• An ottoman in addition to something with a certain height. From the definition itself it becomes clear that it is not an independent product, but serves as an application. Models that barely rise above the floor are not intended for sitting on, but are used as footrests for adults. Children love these miniature things and enjoy using them in their games.
• Complementing armchairs, sofas, beds, sliding under the table or as a component in a non-standard combination (beach cabin with pouf), ottomans firmly occupy a niche in furniture showrooms. One can say more, there is a fashion for designer items that make the interior fashionable, complementing it.
• The video in this article introduces poufs with advanced features. Looking through it, you remember the plot of the film, when “with a slight movement of the hand, trousers turn into shorts,” and here the ottoman transforms into a full-fledged chair with a table, a bed with a lamp stand and other necessary items, while taking up a minimum of space.

Before you start making an ottoman with your own hands, you need to have an idea about this seemingly simple furniture family.

So, poufs are classified according to materials, design, functions and shapes:

1. Soft products use textiles, leather. It’s nice to throw your legs on a hand-knitted ottoman, and when the size allows, you can lounge on it.
2. Rigid ottoman designs are made from rattan, wood, often varnished, and cork tree bark.. Hard ottomans, made with your own hands, are not suitable for long-term sitting, but they bring liveliness and intrigue to the interior.

Attention: An ottoman is definitely a necessary thing, and its need is felt when entering the house, or rather, the hallway.

1. How to make, sew, knit and what design of an ottoman to choose is not an easy task. Ottomans can have exposed frames made of steel tubing or wood.
2. The ottoman may have a closed frame, and the legs are hidden under the frills of a decorative skirt. Such products are popular among the British and Americans.
3. Ottoman with barely visible legs when a chair without armrests and backrest is copied.
4. DIY ottoman with back- Not only comfortable armchair for members of the whole family, regardless of body weight, but also an excellent support for a sore back.
5. What could be simpler than an inflatable ottoman?, consisting of a textile cover with a zipper and an inflatable chamber inside it? Ottomans differ not only in materials and designs, but also in shape.
6. DIY square ottoman, round, triangular, combined from different geometric shapes, can be made from available materials.

Tools at home

How to make an ottoman yourself if you don’t have the skills or desire to saw, cut, or twist? Craftsmen offer a lot of ideas and proposals that are brought to life. The work of making a cute ottoman is not difficult, but quite exciting, and a thing made with your own hands radiates a special warmth and has an aura of home comfort.

Soft ottomans

The most simple circuit How to make a soft ottoman with your own hands is as follows:

• Two circles with a diameter are cut out of fabric, equal to the diameter the upper and lower parts of the product.

Tip: When cutting out parts, remember to leave seam allowances.

• Two rectangular parts of the same size are cut out:

1. width of the height of the pouf;
2. length equal to half the circumference of the top and bottom of the pouf.

• Rectangular parts are sewn together on one side along the width to obtain a long ribbon.
• One of the circles is basted to it and sewed along the seam.
• The same is done with the second circle.

Tip: If the seam is not too even or neat, it is trimmed with a decorative border.

• The resulting pouf cover is stuffed with any suitable material.
• A zipper is sewn into the unstitched edges remaining in the rectangular tape.

The photo shows a diagram of how to make a pouf in the simplest way.

In a similar way, you can make an ottoman in the shape of a cube. The difference is in the manufacture of parts that must have square shape, and to make the sides you will need to make four pieces of fabric, not two.

Then:

• The details fit together.
• To more clearly indicate the edges of the cube, you can use a canvas of a different contrasting color.
• A denser fabric will provide additional strength and elasticity.
• Such a pouf can be filled with padding polyester and foam rubber. These materials hold their shape perfectly and do not deform.
• The hole for stuffing the material is made at the bottom of the pouf so that it is not visible.
• If desired, it can be stitched tightly after stuffing the pouf, or a zipper can be sewn in so that the material can be replaced if necessary.

Sewing an ottoman

• The video in this article demonstrates the procedure for sewing an 8-piece ottoman. To do this, a sheet of paper is folded in four, a template is drawn on it and cut out according to the diagram below.

• The unfolded template is fixed on the fabric and the cutting of 8 pieces begins.

Attention: It is not necessary to purchase new fabric for the pattern; you can use old deposits of knitted clothes and old sweaters.

• The photo below shows that the sharp end of each hexagon is bent inward by approximately 5-6 cm and stitched on a machine, which makes it possible to obtain an octagonal hole for stuffing the finished product after assembling all the elements.

• The blanks are attached to each other in pairs with a distance from the edge of approximately 1 cm. The pairs are folded with the front side so that the seams are on the wrong side; when sewn, there are 4 segments of 2 blanks.
• In the same way, they are sewn together in 2 sections and you get 2 halves of the future ottoman.
• The halves are connected to each other by machine, the cover is turned right side out.
• The ottoman is stuffed with prepared filling (holofiber, foam rubber, padding polyester), and the hole is closed with a lid of the appropriate size. The edges of the lid should already be finished, and it is manually, carefully sewn on top of the stuffing hole.
• The instructions for beginners recommend sewing an ottoman with literally three seams. Why cut out 2 circles, the diameter of which is about 50 cm, or 2 squares, if you prefer clear lines. Geometric shapes will serve as the top or bottom of the future product.
• A strip of the same material or another is cut out in a size corresponding to the length of the circle or the perimeter of the square; the width of the strip depends on the height of the ottoman. The height of the ottoman, in turn, is selected depending on the function that the product will perform, whether it is a footrest, a seat in the hallway, a toy for young children, or a structure in the living room.

Attention: The cutting of the strip for the side of the ottoman is done taking into account seam allowances.

• The work is done in such a way that the seams are on the wrong side, the strip is sewn first of all to the bottom of the product and only then to the top.
• After stitching all the seams, the ottoman is turned right side out and stuffed.
• Using the same patterns presented above, covers for the ottoman with a zipper are cut out for the first option and for the second. This will allow you to wash or clean the cover in the future without unnecessary problems and time-consuming, and not solving the problem of how to cover an ottoman with fabric if it is already made of fabric.

Reliable base for plastic bottles

• Plastic bottles are available in unlimited quantities in every home. Take, for example, beer and water bottles with a capacity of 1.5 - 2 liters; their color in the finished product does not matter, and they will help unload debris in the yard and house.

1. To make a good, stable ottoman you will need at least 16 1.5 liter bottles or 9 2 liter bottles.
2. Cardboard packaging from household appliances also waits its turn and is not thrown away for years, but what if the refrigerator breaks down, how do you take it for repairs? The video in this article will show how cardboard is used to make an ottoman from plastic bottles.

1. You need to stock up on tape, foam rubber and upholstery material.

1. Hot glue gun, zipper for case.

Attention: From round bottles you can make an even larger circle, square or rectangle, that is, the shape of the product is chosen according to your preferences.

• For ease of use, if a very large ottoman is planned, the bottles are connected into separate sectors and sections with tape, and then the formation of the overall structure begins.

1. If the future product is planned to be round in shape, then the ottoman should be made starting from the middle.
2. To do this, take a bottle and, using radial movements, attach new elements to it, which are carefully fixed to each other with tape.
3. After completing the circle, cut out the base from thick cardboard. It should be slightly larger in size than the bottle structure.

1. The cardboard is also secured with several layers of adhesive tape. There is no need to dwell once again on the point that 2 bases must be prepared, and everything is clear.
2. It's your turn soft upholstery, for which two parts for the top and bottom are cut out of dense foam rubber, which are glued in place.
3. From the remaining part of the foam rubber, according to the dimensions of the circumference line of the side part, a rectangle is cut out, which is wrapped around the pouf.
4. The final stage of sewing the cover from furniture fabric, preferably with a zipper. This operation will not only allow you to easily remove the cover for washing, but also make several options and update it from time to time. appearance of your product.

Ottoman from grandma's rarity

How to make an ottoman out of a stool so that grandma’s rarity can serve for many more years?

Indeed, a well-knitted stool made of durable wood, painted oil paint, may please the owners for many years, but the appearance does not correspond to the modern environment. Remodeling will help bring balance to the interior old stool in a stylish ottoman.

• The stool structure is pre-strengthened with self-tapping screws.
• The legs are shortened a little - do not forget to check the level so that the ottoman does not wobble later.
• The frame of the future ottoman is assembled using 4 sheets of plywood. They are attached with self-tapping screws to the legs of the stool.
• The fifth sheet of plywood is screwed from below and serves as the bottom of the future craft.
• The foam for the seat is cut out with an allowance of 5 cm.

Attention: Top part The ottoman is coated with glue, then the foam rubber will not form an untidy lump over time.

• The upholstery fabric on the seat is attached together with the foam rubber using staplers.
• Foam rubber can be attached to the sides with slats, which help give the ottoman a round shape and make it more beautiful.
• The rest of the structure is covered with fabric and secured with staples.
• The wheels are screwed on or, as in the photo above, the cute little legs of the updated stool peek out from under the flirty upholstery.
• The problem of how to make an ottoman from a stool was solved in a short time.

For those who like to knock

The rich Russian language raises many associations and questions. How to knock, where to knock, when to knock? For those who like to hit a nail with a hammer, we suggest making an ottoman with your own hands from boards and chipboard.

• Rectangular pieces of 40x30 cm from chipboard are pre-prepared in the amount of 4 pieces.
• A circle with a diameter of 30 cm and 4 wooden blocks.
• Wood glue.
• Furniture wheels with special fasteners.
• Metal corners, screws.
• Foam rubber and upholstery fabric.

As you can see, the set of necessary materials does not differ much from each other when we make an ottoman with our own hands, even in different ways:

1. A box is assembled from rectangles. Metal corners and self-tapping screws are used, all corners of the structure are aligned, they must be straight.
2. The bars on which the wheels will later be located are fixed with glue on the lower part.
3. A base is attached to the top in an individually selected shape.
4. The finished frame is upholstered using the same technology using foam rubber, fabric and a zipper on the cover.

For lovers of knitting and stuffing

How to make an ottoman with your own hands that is frameless and therefore soft. Needlewomen who know how to crochet will be able to knit a soft ottoman much faster, but not everyone may like their appearance.

Lovers of working with knitting needles present interesting models of ottomans knitted with them:

• To work, you will need the thickest knitting needles that are available in stores.
• For knitting needles with a diameter of 9 mm, fairly thick wool is suitable.
• Ordinary threads offered in stores are too thin. The price for them is not high, but due to the fact that you will have to make thicker ones out of them, weaving them together, you will have to purchase enough a large number of, which will add to the cost of the product.
• You can, of course, cut, unravel, and twist unnecessary knitwear, which takes a lot of time, and finding the right amount of plain knitted clothing at home that has become unusable is quite problematic.
• It seems that the solution to the problem of how to make an ottoman with your own hands has reached a dead end, but cotton clotheslines caught my eye.

Attention: Synthetic clotheslines are not suitable for this job, and cotton ropes are difficult to buy in small towns.

• For a soft ottoman of sufficient size, you will need 20-30 of these ropes, which are tied into a long rectangle.
• The side is tied together with rope to create a spacious, wide skirt.
• The bottom is tied with a rope of the same color and you get a bag that needs to be stuffed with something. There are 2 options here - use old items neatly stacked on shelves in the closet or go to the store and buy foam rubber or holofiber.

• Unnecessary old items make the ottoman heavy and not as round and fluffy as those made from store-bought materials, but it frees up space in the closet for new clothes.
• The top of the ottoman is decorated with the same rope and you can try out your product.

Ottoman from an old bucket

Here's another one interesting solution, for which we will need: an old plastic bucket, a thick jute rope, a hot glue gun, a stapler, scissors, a cabinet handle, Velcro tape, upholstery fabric and a few new microfiber cloths. You will also need cardboard, but it will be better if you replace it with thin plywood.

• First, wash the bucket and remove the metal handle.

• Next, using hot glue, glue the outer surface of the bucket with rope, starting from the bottom.

• Cut the end of the rope and hide it carefully.

• Place the bottom of the bucket on the cardboard and trace it. Lay out the upholstery fabric according to the intended pattern and cut round blank with a release of 5 centimeters.

• We make a hole in the center of the cardboard and fabric. We pass a bolt from a furniture handle through them and screw on the knob.

• Next, we roll the fiber into tubes and radially wrap the bolt between the cardboard and paper, creating a kind of roll. To prevent the fiber from unwinding, we securely fix it with glue.

• Then the fabric is stretched and secured on the reverse side with a stapler.

• To hide cardboard marks, close reverse side seats with another piece of fabric that needs to be placed on glue.

• Cut the Velcro into four equal pieces and stick them crosswise onto the bottom of the bucket and the base of the saddle - with the bristles towards the bucket and the fluffy part towards the seat. Connect the two parts. Hooray! The ottoman is ready!

The result is something like this useful craft, on which you can sit comfortably.

Various options provide the opportunity to solve the problem of how to make an ottoman yourself from scrap materials that are available in abundance in any home. The only thing I still wanted to focus on was the floor in the room.

Laminate is quite sensitive to mechanical stress, so it is better to make an ottoman without wheels and legs, that is, with a solid bottom. On soft covering, carpet, ottomans on casters are appropriate, but for tile covering there are no restrictions, except forged legs can be an exception.

Chipboard ottoman

In one toast, the hero of “Prisoner of the Caucasus” expressed the very essence of existence, so that “our desires coincide with our capabilities.” If you have free time and a desire to make an ottoman with your own hands from chipboard, you need to prepare the possibilities.

• Tools and necessary materials stocked up in advance.

• A good ottoman cannot be made without a good base made from a sheet of chipboard. Optimal size the design is within the range of 400x400x500 mm.
• You can make a wooden ottoman using a simplified technology, making a frame in the form of a mailbox from a timber and screwing it on with the side cuts, but since the ottoman is being made for yourself, you can try.

Work with pleasure

You should not start work in a bad mood: something will fall on your foot or you will hit the wrong nail with a hammer.

• 5 squares of 400x400 mm are marked and cut from a sheet of chipboard to make the walls of the structure and the bottom.

Attention: The bottom of the ottoman should not be made of plywood; small children like to hide in secluded corners and can break thin plywood and get injured.

• The lid can be made in any geometric shape: square, round, oval. Beginners may not want to experiment and just stick with a square lid. It will have dimensions slightly larger than the main box 430x430 mm, in order to protect it from falling inside.
• The height of the finished product is made up of its constituent elements - the height of the structure is 400 mm, plus the rollers are 50 mm, the bottom and tire are 32 mm thick, the upholstery is 50 mm thick, for a total of 532 mm.
• From the prepared elements, the formation of the structure begins.
• The sides of the ottoman are fastened with metal corners. The beams used to glue all the internal corners will help increase rigidity and reliability.
• From the front side of the ottoman, the cutouts themselves are screwed into the beams, the heads of which should be recessed into the wood so that later there are no problems with torn upholstery.
• The lower part of the box is coated with wood glue along the perimeter, capturing the ends of the beams.
• The bottom of the ottoman is attached, and the cuts themselves are again screwed into the ends of the beams. The assembled structure must dry well.
• The base of the ottoman has been made, but there are still no wheels and a lid on which you can sit in the future.
• The lid is secured with 4 bars screwed from the inside. The work is carried out after you are sure that the lid closes smoothly and the side reinforcement bars do not interfere with the closing of the lid.
• The finished structure is turned over, and the wheels are attached using the cuts themselves.

Attention: They are fixed through the bottom to the ends of the beams, for which small holes are drilled in the bottom.

Before continuing work, you need to make sure that the resulting structure is sufficiently stable, holds the person sitting on it well, and there are no flaws that interfere further work, otherwise there is no point in starting upholstery.

The ottoman gets dressed

A do-it-yourself ottoman made of wood, chipboard, or generally soft needs clothing on top. This function is performed with honor by high-quality upholstery fabric, neatly attached to the frame of the structure.

• First, the cover of the ottoman is made, for which a soft lining is cut out from foam rubber, padding polyester, and batting. The size of the pad should correspond to the parameters of the seat so that it is neatly glued into place without drooping.
• From the fabric intended for upholstery, a blank is cut out to be somewhat larger in size than the lid. This is done so that the edges can be folded under the lid and secured from the inside with a stapler or furniture nails.
• The instructions instruct you to further design the sides of the ottoman.
• A part is cut out from upholstery fabric 400 mm x 4 = 1600 mm with a margin for connection. Also in height, the material must have an allowance at the top and bottom.

Attention: The fabric must be straightened, stretched, tucked inward, and the edges must be secured with furniture nails or a stapler.

• The seat is decorated, the niche is upholstered, all edges are carefully closed and the finished product can be presented to discerning family members for inspection.
• A do-it-yourself plywood ottoman is made according to the same pattern if you choose this simple design option.
• The work becomes a little more complicated when an opening drawer is provided on the ottoman, then the stop bars are replaced with door hinges.

Getting acquainted with the design of this simple piece of furniture, one detail catches your eye: despite the difference in shapes of ottomans and their types, the base is a rigid frame, there is a seat and legs. They are decorated in different ways, but quilted leather or leatherette gives the products an elite, luxurious look and you cannot immediately determine that the price of the product is within reasonable limits.

Although, it should be noted that a neat ottoman, covered with a different material, can bring comfort and convenience to the room and looks no less elegant than a leather one.

Updated:

Many people today are wondering how to make an ottoman with their own hands. This is a very profitable and original solution. After all, this way you can make the desired piece of furniture without spending practically any money. Finding material is not difficult. And you can choose the shape and design of the ottoman yourself, which is not always possible when buying in a store. There are many options for how to make ottomans for the bedroom with your own hands from scrap materials. The interesting thing is that you can make ottomans even without complex patterns. So, you can make simple and soft ottomans with your own hands. Let's look at a few of the simplest and at the same time universal options making this simple but necessary piece of furniture.

After looking at the photo of an ottoman for the bedroom, many will want the same one for themselves. In fact, you can assemble ottomans with your own hands in just a few hours. So, the first version of a DIY ottoman is the simplest. First you need to decide on the dimensions of the future product. Next, take large sheets of paper and, using a compass, draw a circle on them that will correspond to the diameter of the bottom and top of the ottoman (they should be the same). Along this circle, you should cut out two circles from the fabric that will later be used to upholster your ottoman. It is advisable to choose a dense fabric that does not “fall apart” and is securely stitched. It is very important to leave allowances of approximately 2 cm around the circumference.

Now let's move on to the remaining parts. It is necessary to measure the radius of the circle without allowances and measure this distance on another piece of fabric, and then set aside a distance perpendicularly that will be equal to the height of the future ottoman. This will result in a rectangle. Cut out a second exactly the same rectangle. And again, on each side of the rectangles, leave 2 cm for allowances.

Now start sewing the parts together. First we work with rectangles. They need to be sewn together along the width allowances so that the result is one large long rectangle. Now you will need to sew the circle. It is sewn along the height of the rectangle slowly and carefully. The result is a cylindrical case that has no bottom. This cover can be placed on any ottoman. Or you can just fill this case soft material like cotton wool.

The circle on the bottom of the ottoman is sewn on at the very last stage, when the inside is filled with soft material. And to prevent the edges of the circles at the top and bottom from fraying over time, you can attach a decorative ribbon to them.

Making a wooden pouf

A DIY master class on ottomans will make the task much easier. You will clearly see how the structures are made. But it's more difficult option- DIY production wooden ottomans, in which you can put all kinds of things.

To work, you need to stock up on screws, furniture wheels and metal corners in advance, wooden blocks, chipboard sheet for making the walls and bottom of the pouffe, foam rubber, fabric for upholstery, as well as regular glue PVA.

So, first we work with chipboard sheets. You will need to do the following yourself. You need to cut 4 rectangles out of them. The height should be approximately 30 cm (which corresponds to the height of the pouf), the width of each sheet should be 40 cm. The sheets are connected using self-tapping screws or metal corners, and the joints are coated with glue for greater reliability.

Now it's time to make the bottom and lid. To do this, a square is cut from the same sheets or from stronger wood to the size of the bottom for the ottoman (this must be measured first), after which the bottom is nailed to the frame using nails or self-tapping screws. The lid for the ottoman can be made separately. To do this from chipboards just cut out a square - a little more sizes pouf holes. It doesn’t have to be attached at all; it will be a separate part. If you want to attach a lid, you will need special hinges that will allow the lid to open and close normally.

So, the main part of the ottoman is ready. Now all that remains is to give it softness and cover it with upholstery material. To do this, foam rubber is cut out, the edges of which are coated with glue and pressed against the frame of the pouf. Please note that for the lid you need to use a thicker layer of foam rubber so that the product is soft.

When all the parts that should be soft are trimmed with foam rubber, it's time to cover the ottoman with fabric. The easiest option is to use a regular furniture stapler. It will be necessary to cut out pieces of fabric with a margin, so that later, by stretching the fabric and bending its edges, attach it to the tree using a stapler. This way the fabric will hold quite firmly.

To complete the work, all that remains is to attach the furniture wheels to the bottom. For this, self-tapping screws or self-tapping screws are used - it all depends on the model of wheels. And one more thing: the more heavy things you plan to put in the ottoman, the more powerful wheels you need to choose.

Pouf from an old sweater

Another option is a simple and neat ottoman made from an ordinary old sweater. To do this, first cut out the bottom of the ottoman of the desired size from felt. Then take an old sweater, first turning its sleeves inside. There will be two holes in the sweater on the front side that need to be carefully sewn together.

Now take a piece of felt and just as carefully sew it to the bottom of the sweater. The result will be a kind of cover. Then you need to make the base of the ottoman. For this purpose, you can use regular dense foam. It is best to make a square ottoman, since in this case it will be much easier to measure and cut a rectangle along the height of the ottoman and a blank for the bottom. Then all the parts are glued together, after which the former sweater is pulled over the top onto such a base. Now all that remains is to make a hem at the top of the sweater fabric for the lace, sew the lace there, and after filling the ottoman with cotton wool, tighten the lace tightly.

So, several options for making an ottoman for the bedroom have been considered. There are many videos on the Internet that show in more detail how you can make such a piece of furniture with your own hands. Therefore, any woman, if desired, can transform an old pouf or make a completely new one. So, feel free to make a pouf with your own hands.

Making an ottoman with your own hands classic style start with legs. Two boards 48 cm long and 5x5 cm in cross section are cut at an angle of 45 degrees. They are knocked down with a cross.

A block 35 cm long is glued to the resulting cross. Additionally, it can be secured with a self-tapping screw.

Another similar cross is attached to the top.

how to make an ottoman with your own hands. Photo

For seats take plywood 1cm thick and 40x60cm in size. Under the plywood they put foam rubber 10cm thick and a layer of synthetic padding with a margin so that it can be bent.

We bend the synthetic winterizer and nail it to the plywood. Then they take the upholstery fabric and also fasten it from the inside out.

For decorations The ottoman uses decorative nails, which additionally secure the upholstery.

DIY ottoman. Master Class

Cross boards are added to the legs. The entire structure is treated with stain.

Screw the seat to the base with legs. It turns out a comfortable, hand-made ottoman.

DIY wheel ottoman

To make an ottoman from a wheel, you need to take a wheel the right size and wash it thoroughly.

DIY tire ottoman. Photo

From plywood cut out two circles. One along the diameter of the inner part of the tire, and the second along the outer part, but so that it does not protrude beyond the boundaries of the tire.

To make legs take sample, traced, and then cut out of the board. A total of four legs are required.

The legs are attached to the base circle. They are placed at equal intervals and reinforced bars.

The legs are painted and glued to the base, and then secured additionally using corners.

Glue is applied to the base and the wheel is placed on top.

Glue is spread on top of it and the top cover is glued.

The tire is pasted over rope using hot melt glue. Rope can be used in different colors.

Finally, the legs are additionally painted.

Plywood ottoman

DIY ottoman step by step. Photo

Help you make an ottoman with your own hands step-by-step instruction. They take plywood sheets with dimensions 45x45 cm and cuts of 45 degrees.

Vinyl is cut to the size of the plywood with an addition of two or three centimeters of margin. A soft cloth is placed on top of it, you can take thin foam rubber, and then covered with a plywood sheet.

The vinyl upholstery is folded and secured with a stapler, and the excess is cut off.

Corners are used for fastening. The screws should be less than the thickness of the plywood.

Paper with a pattern is placed on the surface of the vinyl.

DIY ottoman. Master Class

Decorative nails are used to complete this pattern, creating an interesting pattern and additionally securing the upholstery. The paper is then easily removed. The result is a beautiful plywood ottoman with an original pattern.

How to cover an ottoman?

An old plywood ottoman can be updated sheathing his new materials. For this they remove bottom part covers.

The new fabric is cut, tried on and secured, stapled at the corners.

The bottom is re-screwed to the top cover.

Measure the amount of fabric, making a reserve.

Textile mark. It is more convenient to do this on the ottoman itself, marking the seams with needles.

They try everything on the ottoman.

Excess fabric is cut off, and the joints ironing iron.

Attach the fabric to the top of the ottoman, wrapping it.

Then wrap it on inner side products.

After this, the fabric is stretched at the base and nailed staples. The result is new do-it-yourself ottomans made from old ones.

Ottoman made of plywood and fiberboard

From pine timber making ribs for the pouffe.

From Fiberboard cut out squares of the same size. The bottom and seat will be made from these.

Assembled using self-tapping screws frame products. Its sides are covered with sheets of plywood.

First, the base is pasted over polyurethane foam. To give the ottoman made of fiberboard and plywood additional softness, it is supplemented with padding polyester.

While the structure dries, they cut it out case. You can take flock or leatherette.

The details of the cover are stitched using strong threads.

The finished cover is placed on the pouf.

It is secured from below with a furniture stapler or pneumatic gun.

To make the product look more aesthetically pleasing, the bottom is sealed non-woven fabric

Finally, the legs are attached.

DIY cylindrical ottoman

Consider a master class on making a cylindrical ottoman. To do this you need to cut out circles Chipboard required sizes and timber parts of a certain length.

We connect the circles and timber with self-tapping screws frame.

A sheet of chipboard is attached to the frame around the perimeter, making a wall.

They take foam rubber and synthetic winterizer. The latter is needed to smooth out the folds.

Foam glue is applied to the frame.

A layer is attached to the seat foam rubber four centimeters thick. Then the entire structure is tightened padding polyester.

The case is made from a suitable material.

The cover is put on and secured from below with a stapler or nails.

The legs are attached to the underside.

Making a cylindrical ottoman with your own hands is not difficult if you follow the instructions.

Ottoman with storage box

To make your own ottoman with a storage box, you need to follow the instructions. First, prepare the material: cut out two blanks from Chipboard with dimensions 37x40 cm and 37x37 cm, as well as one square 40x40 cm.

From timber With a cross-section of 4x4 cm, four parts 37 cm long are cut out.

From the resulting fragments they collect box, whose height is 37cm.

In internal corners The timber is secured with wood glue. From the outside, the corners are fixed with self-tapping screws or metal corners.

Glue is applied to the bottom and timber. Glue the bottom and leave to dry.

After drying, the bottom is secured with self-tapping screws.

To do cover, four locking bars are attached to the square sheet to secure the lid in the box.

All that remains is to cover the lid with soft material. For this purpose, foam rubber, batting, synthetic winterizer, and upholstery fabric are used.

Fluffy foot ottoman

A master class on making an ottoman will help you make such a product. It will require four ready-made furniture legs and a circle of plywood or natural wood.

Cut out the size of the circle foam rubber, and then cover it with padding polyester. The excess material is cut off, and the main one is secured on the wrong side.

To secure the legs, four holes are drilled. The legs are screwed into them and the finished ottoman can be used. But to make it look more attractive from the bottom, a circle with holes for the legs is cut out of the fabric. It is placed on the base and secured with furniture nails.

How to sew a soft ottoman?

To sew a soft ottoman you need to proceed in stages. First, an inner case is made, which will contain filler. To do this, cut out two circles from thick fabric. Their diameter should be approximately half a meter. If you need a square ottoman, then two squares. These will be the top and bottom parts of the product.

Then a strip is cut out with a length equal to the circumference or perimeter, and a width equal to the height of the pouf. Be sure to take seam allowances into account.

The resulting strip is sewn from the inside out. First sewn to the bottom and then to the top of the ottoman. The finished cover is turned inside out, stuffed with suitable material and the hole is sewn up.

The only thing left is the ottoman decorate To do this, a decorative cover is sewn on it. The procedure is the same as indicated above. Only in the middle part they do not sew up the hole, but insert a zipper into it, sew on Velcro or buttons. Absolutely any fabric can be used for a decorative cover.

DIY ottoman made from a plastic bottle

Let's look at how to make an ottoman out of bottles with your own hands. Take two large plastic water bottles. They are cut and the two parts are combined to create a part of the desired height.

Details on how to make an ottoman from bottles with your own hands can be seen in the photo.

For the base and seat, take circles from Chipboard. A plastic base is attached to one, and the second is attached on top.

DIY plastic pipe ottoman

Consider a master class on making an ottoman from plumbing pipes.

First the pipes cut into pieces approximately thirty centimeters long. You will need about nine of these pieces.

Color pipes acrylic paint golden color. It is necessary to paint in several layers. Allow each layer to dry for about twenty minutes before applying a new one.

Top painted surfaces process protective varnish. This makes it resistant to water.

The pipes are secured with an adhesive gun. The glue will set quickly, so everything must be done without delay.

Polyurethane mats for the bathroom, they are folded in half and cuts are made in them along the perforations. The length of the cuts is approximately five centimeters.

The rug is rolled up and a kind of bud is obtained.

Such rolls with buds are inserted into pipes. They should fit tightly. In this case, additional fastening will not be necessary.

The result is original ottoman which will look great in the bathroom.

Ottoman made from plastic bottles. Step-by-step instruction

Let's look at a master class on how to make an ottoman out of bottles with your own hands.

Bottles first connect using tape into a round piece.

From cardboard cut out circles of sufficient density and thickness required diameter. This will be the seat and bottom of the pouf.

The bottles are connected to the cardboards with tape.

The surface of the resulting frame is covered padding polyester or foam rubber.

Two circles and a rectangle are cut out of the fabric. The cover is partially sewn on a machine, then put on the structure and finished off by hand.

The top and sides are knitted from pile yarn, and fabric is used for the bottom.

All parts of the decorative cover are connected manually.