Fencing beds with boards. How to make fencing for garden beds with your own hands from scrap materials? Photos of beautiful fences and fences for garden beds

This article discusses beds for the lazy: photos of the easiest structures to make for those who want to get a neat garden with a minimum of effort, the most common materials and technologies for creating structures based on them. The reader will learn how to combine vegetable crops in one bed and prepare the soil for planting cucumbers. The article contains practical recommendations for beginning summer residents.

Design proper beds in the garden will solve many problems and open up new opportunities for the owner of a summer cottage:

• protection against soil erosion in the garden when there is a large amount of rainfall or watering the plants. The sides of the bed will keep the nutritious soil in place, preventing it from washing out onto the paths. In addition, the passages between the structures themselves will remain clean, no dirty puddles or streaks;

• the possibility of forming the basis for creating a temporary greenhouse for the spring period. By installing high sides as fences, a multi-layer bed can be organized inside the structure, which can be used as a greenhouse. To do this, it is enough to install special arcs and stretch the film. The result will be a neat greenhouse house;
• improving the appearance of the garden due to orderly and even plantings with beautiful framing;
• creating boundaries to prevent the spread of weeds.

Making your own beds from boards and other materials allows you to clearly limit the planting area, thanks to this weeds And harmful plants are unable to spread widely. If the garden fence is dug to a greater depth, the level of protection increases and perennial weeds, which are unable to overcome this barrier, can no longer penetrate into the garden bed.

Note! With the help of beds with well-buried fences, the spread of plants such as reeds and creeping wheatgrass is effectively blocked. Their root system capable of covering long distances underground if not limited.

Photo interesting designs beds, recommendations for their creation. Tips for Designing the Unusual landscape design Location on.

The most best place is an area where the sun is present throughout the day. It is allowed to install beds where there is shade in the morning or during the day. If the proposed construction area is dark throughout the day, you should not use this place for arranging a vegetable garden.

How best to make beds in the garden: choosing the optimal design

The design of the beds is selected at an early stage of planning, when a place for the vegetable garden has already been selected.

Each type of beds has certain advantages:

• raised or - the most effective designs that are best suited for growing vegetable crops. The building materials for their creation are not expensive, and the soil does not need to be dug up. The width and height of the structures determines how much effort and time will be required to build them. Most often, summer residents prefer wooden beds made of boards. On the Internet you can find photos of raised beds with your own hands; such structures do not have fencing. They also fall into the category of elevated structures;

• Container beds - will be beneficial in cases where site space is limited. Small, large and medium-sized pots are suitable for organizing such beds. Garlic, peppers, lettuce and herbs feel especially good in containers. Mobility is another advantage of container beds, which can be moved to any location if desired;
• open ground beds are the oldest method of growing crops that are planted directly into the ground. In such conditions it is more difficult to obtain good harvest Therefore, the technology of joint planting of vegetables in the garden is often used.

Helpful advice! If you plan to plant crops in open ground, it is recommended to determine the quality of the soil, fertilize it and check the compatibility of vegetables in the garden according to the table.

How to make beds from boards with your own hands: useful tips

Raised beds are most often made from wood. This material, in comparison with others, is considered the most practical and environmentally friendly. Such designs look very aesthetically pleasing in the photo. Do-it-yourself beds made from boards have other advantages:

• a simple maintenance system involving easy weeding, harvesting and watering of plants;
• the ability to grow vegetable crops even where the soil is completely unsuitable for these purposes. A frame is made on the basis of the boards, which is subsequently filled with fertile soil purchased in the store, so there is no connection to the quality of the soil and its composition. Thanks to this, plants can be grown even in areas with rocky surfaces;

• Box structures allow you to hold soil inside the bed. In addition, the presence of sides simplifies the process of installing arcs to form a greenhouse. It is much easier to secure these elements to the fence than to dig them into the soil;
• Even without knowing how to properly make garden beds, any summer resident can cope with the manufacture of wooden box structures. The boards are easy to process, and the construction and assembly of the frame does not require expensive tools;
• there is no chance that plants planted close to the sides will get burned in the summer heat. Wood, unlike metal, is not prone to overheating.

Note! The environmental friendliness of the material allows you not to worry about getting into the ground. harmful substances. Wood is much safer than asbestos-cement sheets (slate). The exception is boards treated chemicals designed to double the service life of the material.

Making practical beds from boards: how to make the right choice of material

Summer residents most often create wooden structures based on materials found on the farm. To make beds, timber, round timber, slab, and lining can be used.

When it comes to purchasing boards in a store, you should pay special attention to the type of wood from which they are made:

• a board made of ash or oak will last a very long time. Although the cost of such products is quite high;
• pine remains the most favorable in terms of price and processing. But this type of wood is highly susceptible to rotting while in the ground, so its service life is short. By using impregnations and antiseptics, the life of pine can be extended by a couple of years;
• boards made of cedar and larch wood are considered the most suitable material for making boxes. Larch is naturally impregnated with resin, thanks to which the product will retain its newness for many years without the use of additional impregnations. Cedar wood is characterized by a lower resin content, but it is not inferior to larch in terms of durability and at the same time has an affordable price;

• Boards made from acacia feel good in the ground. It is worth noting that this type of wood is durable and has a solid structure, so its processing will be more difficult. To work with acacia you will need a powerful electric tool.

Helpful advice! It is not recommended to skimp on the quality of the material. Boards made from poor wood are susceptible to rapid rotting. After a few years, holes will appear on the fences of the garden beds, through which fertile soil will be washed away during rains and watering of plants.

Making beds from boards with your own hands: photos, dimensions of structures

Box beds have a rectangular shape and are made of boards. The simplest design does not require special knowledge and skills, so any novice summer resident can handle its production. The main thing is to correctly calculate the dimensions of the boxes.

• height– many summer residents strive to create the highest possible sides. However, this approach is erroneous if it is not intended to build a warm bed for cucumbers or other types of crops, where a fence height of up to 0.7 m is acceptable. The technology for manufacturing such structures requires laying multi-layer insulation. For ordinary beds, such high fences are not required; it is enough to limit it to 0.15-0.2 m. Excessive height of the sides is also unprofitable in economic terms, because their construction will require a lot of boards. In addition, wood is susceptible to deformation changes under the influence of moisture, so there is a risk that over time high fences will swell and lose their attractive shape;

• width – experienced summer residents It is recommended to choose a width equal to half the height of the person who will care for the beds. Most often, this parameter is in the range of 0.9-1.2 m, because during work a person should be able to reach the middle of the structure from the side fence;
• length– this parameter is practically unlimited. Although excessively long structures reduce the level of rigidity of the side rails, it is therefore recommended to choose a length within 4-6 m.

Helpful advice! When choosing dimensional parameters for wooden beds, it should be taken into account that between them it is necessary to organize passages 0.4-0.6 m wide. Only after this is considered the layout of structures on the site.

Creating mixed plantings of vegetables in the garden: photo examples and optimal schemes

The method of combining crops is very effective in practice if the companion plants are chosen well. Therefore, plot owners use a special table to calculate the proximity of vegetables in the beds before planting. Some types of vegetables have a depressing effect on each other, others can improve the growth and development of neighbors and provide them with protection from pests.

The correct proximity of vegetables in the beds: compatibility table

Many summer residents note that thanks to the proximity of beans as a seal for the beds where potatoes are grown, the number of Colorado potato beetles is significantly reduced. Marigolds effectively protect cabbage from the white butterfly. Despite this, a certain balance must be maintained. After all, an excessive amount of marigolds in the garden can stifle the growth of cabbage.

Table of vegetable neighbors in the garden that create a successful tandem:

The following pairs of plants are characterized by poor compatibility of planting vegetables in the garden:

• cabbage and strawberries;
• onions and beans;
• carrots and celery, dill, parsley;
• cucumbers and potatoes.

Helpful advice! In addition to the main crops, it is recommended to spot plant herbs and ornamental herbs in the garden bed. Thus, the garden will not only be beautiful, but also useful.

Examples of mixed planting of vegetables in the garden: popular schemes

A good example of the compatibility of vegetables in the garden is the combination of onions and carrots. As an independent crop, onions can produce about 2.5 kg of yield from 1 m² of bed. Carrots on the same area yield approximately 6 kg of yield. When growing these crops together, you can get 9 kg of vegetables from 1 m². These plants create protective barriers against pests for each other, so the efficiency of the used area increases.

Of course, when planning to grow crops together in a garden bed, you need to group the plants based on their height so that none of them blocks the light for the other. This is necessary because vegetables can not only have different heights, but also grow at different rates. It is desirable that the compactors that are planted additionally be lower in height than the main vegetables. The principle of multi-tiered juxtaposition of vegetables in the beds makes it possible to create favorable conditions for the root system of crops, and also promotes rational use solar energy.

High yields are collected from the beds where beets and late cabbage are planted. To do this, beets (9 plants) and cabbage (4 bushes) should be planted on an area of ​​0.8x0.8 m, not forgetting to fertilize the holes with a glass of compost and a handful of eggshells (grind first).

To obtain excellent result When planting beans and tomatoes, it is recommended to place the plants in a row with a step of 0.3 m. Along the row with bush beans, it is installed so that each plant is located at the dropper. Tomatoes are planted in the central part of the garden bed. As a result, the bean and tomato bushes should be arranged in a checkerboard pattern.

Helpful advice! It is better to trim tomato stems for the winter, and as low as possible. On the contrary, it is recommended to leave beans untouched.

Table of crop rotation of vegetables in beds by crop groups

Crop rotation can also affect the yield of beds. If the annual change of crops grown in the same bed is carried out in the correct order, the garden will produce good harvests.

Advantages of proper crop rotation:

• eliminates the possibility of soil fatigue on the site, since the same vegetable absorbs the same set of soil from the soil every year nutrients and he does it from the same depth;
• the spread of diseases and pests that affect plants of the same family is prevented;
• it becomes possible to rationally use fertilizers.

The most primitive way of organizing crop rotation in a garden bed involves planting plants from different families in the same area every year. The easiest way is to divide cultures into four groups:

1. Leaf crops - these include different kinds cabbage, green onions, lettuce, and spinach.
2. Fruit vegetables - cucumbers, tomatoes, eggplants, peppers, pumpkin.
3. Legumes - beans, chickpeas, peas.
4. Root vegetables - potatoes, beets, radishes, carrots.

Table of the simplest crop rotation in the garden:

Arrangement of beds for cucumbers in open ground: photos and recommendations

To grow cucumbers in open ground, beds are usually prepared in the fall. This should be done before the rains and temperatures drop. The planting area must be carefully dug up and saturated with organic fertilizers. Cucumbers like fertile, light soil that has good level air and water permeability. If the soil on the site is heavy, sawdust, peat or sand can be added to the soil to facilitate loosening.

Helpful advice! To get a rich harvest, it is recommended to add a tablespoon of superphosphate and a glass of ash per 1 m² of area. Instead of ash, you can use dolomite flour.

The process of preparing a bed for cucumbers in the spring includes the procedure for disinfecting the soil. To do this, the site of the future garden is spilled with potassium permanganate. The solution must be hot and strong. In addition, soil fertility can be increased by adding chicken manure or manure. This procedure is carried out locally, that is, the fertilizer is placed directly into the trench or hole. After this, the bed is covered with a small layer of soil, where the seeds are then planted.

How to make a bed for cucumbers: agrotechnical secrets

To get a rich harvest of cucumbers from the garden, you must adhere to the basic rules:

1. There should be no irrigation canals, streams or flowing reservoirs near the beds.
2. If the planting area is not protected, it is better to place the garden in a quiet place where there are no drafts.
3. Procedures such as watering and loosening the soil must be performed on a regular basis. Otherwise, a hard crust, and the bed will dry out greatly.
4. Cucumbers grown in open ground need to be fed much more often than those grown in closed beds.
5. During harvesting, it is not recommended to change the position of the plant's vines or turn them over.
6. Weeding plants in open beds must be performed more often than is done indoors.
7. It is recommended to cover the entire surface of the bed with black film.

Cucumbers need a rich biological composition of the soil. Therefore, it is recommended to fertilize the soil with organic matter, for example, grass, humus, branches, rotted manure, and food waste. In the process of their decomposition, not only does the fertility of the soil increase, but also heat is released, warming the soil. To prevent high temperatures from damaging the root system of cucumbers, experienced summer residents advise abundant watering.

Interesting fact! Sometimes the decomposition of organic fertilizers occurs so actively that the soil in the garden bed warms up to 80° C. Under the influence of this high temperature Many pests, viruses and pathogenic fungi contained in the soil die. As a result, natural sterilization of the soil occurs.

There are several ways to grow cucumbers in open ground. For these purposes, you can form a long ridge bed, a hole, dig a ditch, or build a high structure.

How to make cucumber beds in the garden with a bookmark

To form a bed with a bookmark, you will need to dig a trench. The depth of the ditch should be equal to two shovels. Then branches are laid out across and sawdust is poured in. The next layer consists of straw and garden waste. Can add autumn leaves, cardboard or newspapers, compost. The thickness of the fertilizer layer should be within 5-7 cm. The layer is poured warm water and covered with a mixture of compost and soil.

A bed with a bookmark can effectively serve for 5 years. In the second year of operation, you will not need to add compost to the top layer, because during the decomposition of organic components, the bed itself will produce nutrients.

Advantages of a bed for growing cucumbers with a bookmark:

• convenient watering system;
• stagnation of water is eliminated;
• In the spring there is no need to dig up the soil, just loosen the soil.

Plants can be planted on such a nutrient basis much earlier than is customary in conventional beds. It is not recommended to use beds with filling in low-lying areas and areas where water stagnates.

Warm surface beds for cucumbers in open ground

This type of warm beds for growing cucumbers is built on the surface of prepared soil. This technology will the best option for areas that are located in lowlands. In order to enhance the heating process, the bed is covered with film. As a result, it is formed Greenhouse effect, which has a positive effect on the growth of cucumbers and their yield.

Surface beds also include structures in the form of boxes made of brick, slate or boards. The bottom of these containers is filled with sand, then wood waste. Next comes the layer organic waste and straw. After laying each component, the contents are carefully compacted and filled with liquid manure. Finally, the bed is filled with a mixture consisting of soil.

Helpful advice! Vegetable and fruit skins, fallen leaves, eggshell(ground into powder).

Cucumbers are planted in two rows. Plants are placed along the edges of the box bed, which ensures a sufficient level of illumination. If you plan to plant cucumbers in early spring, the structures can be converted into greenhouses. To do this, you will need to install plastic arcs and stretch plastic film over them. Thus, heating increases and it becomes possible to get an early harvest. Moreover, the result is completely independent of weather conditions.

Raised beds for cucumbers in open ground

Warm beds with a raised structure are used in cases where the site is located in a region with a cold and humid climate. Due to this, the soil is fully warmed up, allowing the harvest to be achieved at early stages. If they get too close to the garden groundwater, the bed is raised high, due to which the plantings do not get wet on soil that is oversaturated with moisture. Stone fruit trees, whose roots are severely affected by groundwater, are planted in a similar way.

As borders for these structures they are used various materials. The most popular of them are slate and wood. In rare cases, metal is used. This type of bed can even be installed in the middle of the lawn. If you frame it in the form of paving stones or tiles, a raised vegetable garden with cucumbers will become a worthy decoration of your summer cottage.

As alternative solution It is possible to build a bulk hill on the territory that does not have a fence. You can take any length for such a bed; the optimal width is 1 m. Do not lift decorative vegetable garden to a height of more than 1 m. The air that remains in the voids formed between the elements of large organic matter provides good ventilation and promotes rapid heating of the soil.

To speed up the decomposition process of fertilizers, the soil is spilled with a solution saturated with special bacteria. The procedure is carried out twice a year. The first time the soil is watered with bacteria is in the spring. After treating the beds, you should wait at least a week before planting plants. The second time the soil is spilled in the fall after the crop is harvested. When the soil has already been treated with the composition, it should be loosened so that the soil is saturated with oxygen and the drug itself is evenly distributed.

How to make beds in the garden: video review of technology

The beginning of the agricultural season is approaching, and many gardeners are more actively studying various aspects of organizing the internal space of the site, exploring options for solving certain problems. Today we will talk about fencing beds, their advantages and the options for materials used.

Many people who like to work on the land and grow fresh vegetables or herbs often have a number of problems. In case your area has lungs sandy soils, it becomes impossible to form a classic bed - when the soil dries out, under the influence of rain, the planting sites “spread” and become flush with the soil, which contributes to the spread of weeds and pests.

Heavy clay soils hold their shape well, but frequent visits to the site lead to partial destruction of the edges of the ridges; they also crumble during weeding, watering and other work. The optimal way out of the situations described above is to fence off the planting areas. durable material, securely fixing the required form. Care high beds and harvesting occurs much easier, with less stress and fatigue, which is especially important for older people.

Ready-made fences - their types and features

The presence of the problem has prompted various manufacturers to offer a solution to it. Enterprising industrialists offer modern gardeners various options design of high beds.

First option involves the use of edged lumber, previously specially treated with various protective compounds that preserve the tree in contact with an aggressive environment in the form of soil. The limited durability of the structure is compensated by its comparative cheapness and the possibility self-made.

Second option, which has become widespread - plastic borders for plantings. They attract consumers with their availability, relatively low price and long service life. Some types of plastics are not resistant to negative temperatures. This fact requires fencing to be removed in the fall and installed in the spring.

Perhaps a more durable option that does not require excessive attention is metal box for garden beds, made of galvanized steel. Additional rigidity is given to the fence by corners welded along the lower and upper edges of the product. A special coating protects the construction material; additional decorative effect is achieved by painting the outer sides.

These options are less common and are suitable for a very limited number of users. The production of some of them is associated with the high cost of raw materials.

We fence the beds with what is at hand

Most often, site owners try to solve problems with fencing their beds on their own. For this they use literally everything that is at their disposal or left over. construction work. One of the most available materials for this there remains a tree. It is enough to connect four edged boards at the ends and you get a neat “clothes” for the garden bed.

By making formwork from lumber, OSB or plywood and filling it with concrete left over from construction, durable stationary fencing is obtained.

If desired, they can be painted with paints, brightening up the space of the site to the envy of neighbors and friends.

Having discovered thickets of willow trees near the nearest pond or river and cut a couple of armfuls of twigs (the bush will only grow thicker after this), it is not difficult to make a fence following the example of the wattle fence, beloved by the southern peoples.

After drying, such a fence can be coated with stain and varnish, extending its durability, and by the time the rods begin to collapse on your natural “plantation,” a worthy replacement will grow.

The remains of roofing materials used to build a roof or install a fence will help make a high border for the garden bed, which will be convenient not only for weeding, but also for harvesting.

Even wavy cement slate, with a skillful approach, will help to obtain even beautiful plantings. It is enough to only partially deepen the sheets into the ground and level them flat.

Flat cement sheets, characterized by high durability and strength, are no less popular among gardeners.

Assembling a wooden fence for a garden bed with your own hands

For modern summer residents, the most affordable ornamental material is still wood. Lumber is quite affordable, stores well and does not require a large list of tools to work with it. If you make your own fencing for a garden bed, we recommend starting with choosing the location and size of future plantings. Based on them, prepare the necessary details of the future design, process them in some way protective composition and let dry. You will also need metal fasteners - nails or screws, as well as tools for working with them.

The boards can also be joined at the ends, but it is better to use additional steel corners for this. They will give the structure additional strength.

Don't limit your imagination. To use all the possibilities of the territory of your site, the beds can have a more complex shape, different from the classic rectangles.

If wide lumber is not available, the fence can be made from more narrow boards, connecting them together with short inserts. To limit the contact of wood with an aggressive environment - soil, we recommend laying out the soil before filling inner space strong ridge plastic film. After completing the work and laying the soil mixture, your bed is ready for planting.

Dear readers, if you have any questions, please ask them using the form below. We will be glad to communicate with you;)

The harvest has already been harvested from many beds. It's time to fence them in for the next planting! The material for fencing beds must not only be durable, resistant to destruction and various damages, but also inexpensive.

The most expensive options are to build stone walls like retaining walls or to build the currently fashionable gabions (a frame made of metal mesh, filled with stones). But such a stationary fence will be almost impossible to move if, for some reason, the site needs to be redeveloped. And it often looks too cumbersome, especially for small plots. Therefore, for those who are not arranging a garden “forever”, it is better to prefer simpler and more mobile options for framing beds.

The most common among summer residents and quite economical option- slate fencing. However, this material has significant drawbacks. Despite its apparent strength, it is quite fragile: it cracks and breaks upon impact. A bed framed with slate will have to be dug up very carefully so as not to accidentally hit the fence with a shovel. In addition, slate is far from ideal from the point of view environmental safety. Its sheets are made from asbestos. The dust that is generated in large quantities when sawing them is very harmful to health, so when working it is important to follow safety precautions, use protective clothing, a respirator, etc.

Metal fencing (most often made of corrugated sheets) also has a number of disadvantages. First of all, upon contact with water, metal corrodes (rusts). If it is not galvanized, then the fence will have to be painted annually, but it will still not be possible to completely protect it from corrosion. It is easy to get injured on the sharp edges of such a frame. In addition, any metal, having high thermal conductivity, quickly heats up in the sun, which can damage the roots of plants that are in close proximity to the fence. This material cannot be called cheap.

Another mobile option - plastic fencing. Available for sale a large number of options ranging from border tape and flat panels to ready-made boxes. Lightweight and durable polymer materials very convenient to use, but do not always meet environmental requirements. When heated (and in hot weather this happens all the time), some of them can release harmful substances, which is again unacceptable in the garden. As for the cost, it varies greatly. Border tape will be cheap, but ready-made boxes, as they say, will cost a pretty penny.

The most budget and safe material-tree. Its service life is limited, but it can be extended by treating with an antiseptic. Moreover, any type of lumber is suitable for edging ridges: slab, edged board, lining, timber and even a fashionable block house. The main thing is that it is affordable.

Most of us have our own small plot of land near our house. In order for it not to be empty, it is necessary to plant it with grass or lawn. However, the most enterprising people try to grow useful crops, such as vegetables, in such beautiful beds. Especially in the country - growing crops here is favorite hobby many summer residents. It is much more pleasant to eat greens, cucumbers or tomatoes that are grown with your own hands in your own beds. The fact is that today vegetables and fruits bought in stores are grown with nitrates, as well as other fertilizers, which then negatively affect human health. Today we'll talk about fences and borders for garden beds.

When planting various plants, we do not always think about what the beds will look like. We protect them with what we have at hand. Wherein appearance The beds turn out to be quite simple. The most important thing is cleanliness and grooming. To prevent weeds from growing and the garden bed to have a beautiful appearance, you need to use small borders.

So, we have determined that separated beds allow you to create a neat appearance for the entire garden. It is very convenient when all cultures are separated. In addition, after it has rained, even the heaviest, the beds will not be washed away. The same can be said when watering the garden. Basically, materials left over from construction are used for fencing.

We use wood

Most often in vegetable gardens you can find beautiful wooden fencing. Depending on the owner’s capabilities, different types of wood can be used. Even branches that have been cut from trees are suitable for making borders.

Of course, for some time such a fence will have an unsurpassed appearance. But when watering, from rain, the tree will begin to become damp and covered with fungus. This means that it will disappear quickly. It is also inappropriate to whitewash the sides, as water will wash away the whitewash. Neither paint nor special coatings will solve the problem, and besides, it is unprofitable. Sooner or later the boards will have to be replaced.

Bricks for fencing

Brick was once very popular for fencing. This is how many city flower beds were fenced off. For example, bricks were installed with “teeth”. It has a beautiful look. In addition, the bricks can be painted or whitewashed.

However, the material itself is expensive. Old brick does not need to be used, as it is not aesthetically pleasing.

Fencing the garden bed with slate

The main roofing material is slate. But it is not always used for its intended purpose. For example, if after roofing works If there are any pieces of slate left, they can be used to fence the beds.

In order for the fence to look neat and beautiful, you need to drive slate into the ground so that its pieces stick out at the same height. Paint will add elegance. However, slate is not always stable.

Stone fences

Natural stone is sometimes used to enclose beds. Of course, this is not a brick, but it will still look neat. But in these works you need to show patience and diligence. Natural stone will need to be sized. Then we fasten them together in the garden with a solution. This type of fencing will last a very long time. But over time, the sides may sink into the ground, so it’s worth taking this into account.

All of the listed materials are traditional, which are used very often by all summer residents. But recently some new products have appeared, which we will consider today.

So, you can choose plastic for the fence, which does not deteriorate from moisture, and the sun does not affect it very much. If your beds are not large, you can use plastic. However, for large beds such material is unprofitable. But the sides can be made of any shape and color.

In some cases, gardeners use materials that imitate natural wood. There are continuous and sectional fencing. They have special fasteners that make it easy to install a fence in the ground. Very rarely, special fasteners are used to install a fence on garden beds.

A budget option is curb tape. You can buy green or brown border tape. The advantages here are obvious. For example, installation is quite simple. The border can be given any shape, without resorting to cutting the material. An aesthetic appearance is provided to the entire garden.

In order to install a border tape fence, you must have a stapler, tape measure and knife. The whole job doesn't take much time. Using a ladle, we make a trench around the entire perimeter of the bed. After the fence is completed, it is necessary to fasten the edges with paper clips. Finally, it is necessary to compact the earth around the fences.

If the bed is very large, then you need to use special pegs, with the help of which fasteners will be installed at a certain distance.

We use rubber

The rubber curb is mounted in a similar way. However, if your bed is high, then this option is inappropriate - the tape does not have much height.

If you made a greenhouse and there is polycarbonate left, then it can also be used to fence the beds. Polycarbonate is not purchased specifically for fencing, as it is not cheap.

So, if you use plastic to fence your beds, the costs will be high and not always justified. And here improvised means come to the rescue, for example, plastic bottles.

Each of us often throws away plastic container. But it is worth noting that it can be collected and then used to fence beds. It is best to choose bottles that are the same size and color. After this, plastic bottles are filled with sand and dug upside down into the prepared trench. Alternatively, you can paint the bottles with water-based paint.

Metal fences

Summer residents often use metal plates to fence their garden beds. Yes, you can use metal plates up to one millimeter thick. The garden bed fencing turns out quickly and beautifully. However, you need to understand that thin metal can easily cut you. In addition, metal in the soil is susceptible to corrosion, which means it can quickly be damaged. If the surface of the metal reflects the sun's rays, this can negatively affect the plants in the garden bed.

If you decide to use metal, you can use galvanized steel. With the help of the lungs metal plates You can easily and quickly form a bed. However, the disadvantage of the material is its price. The use of metal plates is considered unprofitable.

Photo beautiful fencing and fences for garden beds: