Shoe shelf for shoes. DIY shoe rack - a wide range of design possibilities

Shoes need to be stored somewhere, but is it worth spending money on purchasing an expensive shoe rack? If you wish, you can make your own shelf from any available materials - laminate, and even pipes and boxes. This does not require special carpentry skills.

We will briefly tell you... You will find lists of materials and tools, diagrams, drawings and photographs. It's time to take on your entryway!

The choice of materials and tools will vary depending on the design of the future shelf. Therefore, develop single standard problematic. The most technically difficult solution is considered to be the “slim” solution.

The difficulty of such cabinets lies in the installation large quantity various accessories. All other shelves are much simpler, so when compiling a list of necessary things, we will proceed from the most complex schemes. You will need the following tools:

• screwdriver;
• electric drill;
• hacksaw for wood (or metal);
• chisel;
• ruler;
• Sander;
• pencil.

DIY wooden shoe rack

How to make a shoe rack with your own hands

Before you start self-production shelves for shoes, you need to decide on the design of the future product, its dimensions and functionality.

You can create shoe shelves from anything - profiles, wood, slats, laminate, metal and even cardboard. The most popular (in terms of design) are rotating, round and angular models. In some cases you may need to drill and sand (metal, wood). Somewhere we will get by with simple gluing and cutting ( carton boxes

). And some varieties will seem exotic to you.

For those who have an old unnecessary closet, the process of making a shoe rack can be incredibly simple, just watch the following video:

• You can build a modular shelf with your own hands from plywood, and not just a shelf for shoes. This shelf will be attached to the hallway wall and will not take up much space, and the drawings for its manufacture are quite primitive. In addition to sheets of plywood, you will need:
• drill;
• jigsaw;
• hammer;
• perforator;
• glue;

Plywood is cut into identical rectangles (for example, 20x30 cm). The parts are carefully polished, after which the assembly process begins. Sheets of plywood form U-shaped structures that are “nested” into each other, forming something like a labyrinth.

You can hang any number of similar blocks in the hallway. Fastening is carried out using wooden pins and holes drilled in plywood.

Plywood shoe rack

Made of wood

The easiest way is to make a shoe rack with your own hands from store-bought items, rather than from “raw” wood. But since you have decided to start this business from scratch, prepare following materials and tools:

• sandpaper;
• plane;
• metal corners;
• wood glue;
• screwdriver (can be replaced with a screwdriver);
• saw;
• self-tapping screws;
• varnish (or paint);
• pencil and tape measure.

We will use as material wooden board. The width of the workpiece is 25-35 centimeters, the thickness is a couple of centimeters. The manufacturing process looks like this:

1. Vertical side walls are cut out (80-90 centimeters each).
2. The support bars and crossbars are being prepared.
3. Four fragments of 60-70 centimeters are cut out (these are shoe shelves).
4. All workpieces are processed with sandpaper.
5. The bars are attached to the side walls using self-tapping screws.
6. Metal corners are attached to the rear ends of the product.
7. Shelves are laid on fixed beams.
8. After assembly, the product is varnished (if desired, with paint of any color).

A DIY wooden shoe rack can also become a comfortable ottoman. In the following video you will learn how this is possible:

From chipboard

Making your own shoe racks from chipboard is in many ways similar to the previous options. In addition to a screwdriver, drill and other standard tools, you will need:

• mounting knife;
• hex wrench;
• square;
• edge tape;
• plugs;
• screws;
• confirmations.

The shelf can be made, or it can be made with rounded or straight ends. IN general outline the process looks like this:

1. The sidewalls are marked and cut out.
2. With help grinder getting rid of chips and irregularities.
3. Take a hot iron and cover the edges with special tape.
4. Trim off the excess edge tape with a knife.
5. We process the corners with fine-grained sandpaper.
6. We make cuts (if the plan requires it) and assemble the product.

The following video will tell you how to create a shoe rack with your own hands from chipboard and pipes:

From laminate

You can create a minimalist and stylish shelf for shoes and from regular laminate. To do this, you will need laminate sheets (the quantity depends on the level of the shelf) and metal tubes with slots. The slots can be made with a grinder (using metal circles), and plastic plugs can be placed at the ends.

If desired, you can create frame structure up to the ceiling, but then you will have to think about additional fastenings to the wall.

The number of sections is limited only by your imagination and the size of the hallway.

Photo of laminate shoe racks

From slats

Not a bad solution for country house slats can serve. Having stocked up with the necessary amount of this material and a minimum set of tools (hammer, nails, screwdriver), you can assemble a shoe rack with your own hands from slats with two or three tiers in a short period of time. Let's list the advantages of such a shelf:

• ease;
• budget;
• good ventilation;
• practicality.

Shoe rack made of slats

From profile

You can also assemble a shoe rack with your own hands - from a profile, also using tempered glass as materials. From the tools you need:

• Bulgarian;
• glass cutter;
• electric drill (with metal drills);
• jigsaw;
• building level;
• screwdriver

For your purposes, you can use a galvanized profile or a regular multi-colored one. The first will be more moisture resistant, the second will fit better into the chosen interior. A similar structure is mounted on the wall:

1. The profile is applied to the wall and secured with one self-tapping screw.
2. After this, take a level and check the horizontalness of the markings.
3. The remaining screws are screwed in.
4. The frame is mounted.
5. Previously prepared glass shelves are installed.

Shoe rack in loft style

From boxes

Most a budget option- a shelf for shoes, assembled with your own hands from cardboard or cardboard boxes. It takes up little space and looks beautiful in a small hallway. Work procedure: do-it-yourself shoe rack made of cardboard

1. The contours of the blanks are drawn on the box with a pencil.
2. The blanks are cut out using a cardboard knife.
3. Rectangles are folded into special boxes.
4. The blanks are placed on top of each other, forming grooves for shoes.
5. Fastening is carried out with staples.
6. The shelf is mounted on the hallway wall and covered with decorative film.

Cardboard shoe rack

From pipes

To make this shelf, you can take water pipes plastic pipes- for example, those from which risers are installed in bathrooms. The tools you will need are a hacksaw. The procedure for assembling a shoe rack with your own hands from pipes is as follows:

1. We cut PVC pipes into equal segments - these will be the “boxes” of our shelf.
2. Sand the edges with sandpaper.
3. We cover the sections with decorative film.
4. We fasten the sections together with plastic holders on both sides. The diameter of the pipes and the shape of the structure may vary. New cells can be easily integrated into the circuit if desired.

Pipe shoe rack

We do not suggest doing metalwork or going to a blacksmith. It’s quite easy to make a primitive metal shoe rack with your own hands - to do this you need to get an old, out-of-use stepladder. Procedure:

1. A fragment of a stepladder is cut out, consisting of several “steps”.
2. The edges are sanded.
3. The fragment is fixed on the hallway wall.
4. They cling to the crossbars plastic hooks- shoes will hang on them.

Homemade shoe rack made of metal materials

Corner

For the simplest corner shelf For DIY shoes you will need MDF sheets, a jigsaw, a drill, drills and screws. It is advisable to have a pencil, a building level and a jar acrylic paint. The actions are:

1. Two identical rectangles and several triangles are cut out (their number depends on the tiers).
2. The rectangles are fastened with self-tapping screws, forming a corner structure.
3. The same self-tapping screws are used to mount the corner shelves inside.
4. The shelf is covered with acrylic.
5. Now we put the shelf in the corner of the hallway and secure it with dowels to be sure.

Round

To make a round shoe rack with your own hands, you will again need a jigsaw and MDF sheets. The shoe rack will have two tiers, so we will need to cut out three “round pieces”, the radius of which will correspond to the largest shoe size your household. Further actions:

1. Having dealt with the round blanks, you need to cut out rectangular ones (4 pieces).
2. Grooves are cut in the middle of the rectangular blanks.
3. Rectangles are inserted into each other, forming crosses.
4. Using a screwdriver, the crosspieces are attached to round workpieces.
5. The ends are sanded and covered with film.

Photo of a round shoe rack

For residents small apartments The issue of shoe placement in the hallway is very acute. Families with children know what it means to have shoes scattered throughout the apartment. The problem is no less pressing for those who like to select a variety of accessories to complement their look. To maintain order in your home and conveniently arrange each pair, it is not at all necessary to buy expensive shelves from the assortment of furniture stores. Make convenient devices for storing shoes you can use available materials, if you show your imagination. Here are some examples for inspiration.

Simple wooden cabinet

Making such an interior item is quite simple. The four boards are connected to each other using furniture screws. Thin wooden planks are attached to the cabinet fronts. The best paint for painting is water based. Optional top part can be made contrasting and adapted for sitting.

You can simply hang your shoes on the shelf!

The idea is brilliant in its simplicity. So as not to stain the floor dirty soles boots and sneakers, you just need to keep them suspended.

Wooden pallet shelf

They make a lot of things out of such an affordable and practical thing as pallets. They are also suitable for making shoe racks. Building such a piece of furniture is quite simple, since parts of the pallets for the hallway can be left untreated.

Ladder instead of a shoe cabinet

For this idea it will work as a ready-made wooden staircase, and made independently from planed boards. The main thing is that the steps are located at an angle so that shoes do not stain the wall.

Rack of boxes

Wooden boxes are another universal remedy for lovers original furniture. If you place the boxes vertically, they are suitable for storing high autumn and winter shoes. The side surface can be adapted to store keys, hoopoe accessories behind shoes and other useful little things.

Rack for shoes of different heights

In spring and autumn, the weather is very changeable, and shoes of almost all seasons can be relevant. Such simple design with shelves of different heights allows you to store autumn boots next to sandals and sneakers.

Bee hive

Very original design can be created by combining several wooden hexagons, each of which is suitable for storing one or even several pairs of shoes, depending on their size.

Shelf with French chic

An ordinary piece of furniture can become a real hallway decoration if you glue a special film or paper with text printed on the back of the shelf. With this design, it is better to choose a neutral color for the shelf itself.

Skateboard shelves

True skateboarding fans always have a few old boards that have fallen into disrepair. As a last resort, you can turn to fellow hobbyists for help. Multi-colored shelves are great for storing sports shoes.

Shoe organizer

The design of shelves of different heights allows you to store shoes for different weather conditions. A small mirror in the hallway will allow you to evaluate your image before leaving the apartment.

Farmhouse style bench

It is very convenient to store shoes in closed drawers located on the shelves of the bench in rustic style. This storage method gives the hallway a neater look, since shoes are hidden from view.

Full wall shoe cabinet

So that the design does not seem cumbersome, it is better to choose boxes from thin plywood and arrange them in the form brickwork. The strength of such a locker ensures wide board, to which individual shelves are attached.

Diagonal shelves

By placing the usual wide shelves diagonally, you can significantly save space in the hallway.

Copper pipes

An original piece of furniture can easily be made from pipes left over after a bathroom renovation. To attach the shelf parts together, special adapters from a plumbing store are suitable.

Dynamic design

Bars of the same size are attached to the wall using special movable corners. When folded, the structure is decorative panel, and if necessary turns into space for storing shoes and accessories.

The issue of placing shoes in the house remains relevant both in summer and winter. Often the hallway is filled with shoes, especially in the evening, when the whole family has returned home from work or school. To avoid this problem, you can make special shelves for shoes in the hallway, which will help not only decide on the issue of storing things, but also decorate the room. Every housewife knows what this is useful item necessary in the home, since the durability of shoes depends on both proper care, and proper storage, which a well-designed shoe rack in the hallway can provide.

This piece of furniture should be characterized by versatility and compactness, because the hallway usually has a small square area. Shelves for shoes in the hallway can be made in various options execution. Among the varieties that you can make with your own hands, the following are popular:

• Models for walls. Ideal option in small hallway where it is impractical to install a cabinet. It is easy to create such a shelf yourself using wood as a material. If you wish, you can find many photos on the Internet and make the product according to the picture;

• Shelving. Most good choice to design free space. The upper part of the shelf plays the role of a bench or is used as a stand for various useful items;

• Slim cabinet. Such shelves are practical and convenient, as they hide shoes from prying eyes. To open, the product is turned 45 degrees. You can make any shoe rack in the hallway with your own hands: straight, rounded or angular;

• Stands. The most common type floor shelves. In production, you can use the usual bottom of a cardboard box, cover it with some material that does not get wet, and add pebbles.

What materials can it be made from?

From a large number various materials you can choose the one that suits your personal preferences and financial capabilities. Among the materials in demand: profiles, slats, laminate, metal, wood, even cardboard.

Plywood

Plywood is no less popular, from which you can build a convenient and practical bookcase. This type of shelves is attached to the wall, while occupying a minimum of space, saving free space in the room. The plywood must be cut into even rectangular pieces, for example, 20x30 cm. The blanks are sanded, and then the assembly of the parts begins. The sheets need to be formed into U-shaped structures and placed inside each other.

In the hallway you can hang any required amount blocks.

The shelf is attached using wooden pins, as well as pre-prepared holes in the plywood. As a result, the product will look approximately like this:

Chipboard

You can make a shoe rack from chipboard. Here it is advisable to make narrow or angular models, with straight or rounded ends.

The process is quite simple and looks like this:

Drilling holes in the chipboard

This is a very economical and simple option for making a shelf, since the cost of chipboard is very low.

Tree

Wood is considered the most convenient to process, does not emit toxic substances and is considered absolutely safe.

Wood is the easiest to work with, as it lends itself to various processing processes, and it is not difficult to find. A variety of tools are used to process the material:

• plane;
• jigsaw;
• paper (machine) for sanding;
• screwdriver;
• saw;
• pencil or tape measure.

Tools needed for woodworking

DIY making

The easiest to make are shoe racks. You can easily make them yourself using ordinary tools, materials, visual example photo.

Do-it-yourself ready-made shoe rack

To create such a piece of furniture, just take:

• 6 wooden blocks;
• practical self-tapping screws with a diameter of 3 mm and a length of 25 mm;
• self-tapping screws for wood processing;
• special varnish for coating.

Creating a shelf with your own hands should start with the sides. The depth should be approximately 33 cm, which is quite sufficient for various shoe sizes. First you need to saw off 6 even bars, 33 cm each. Next, you should evenly distribute four bars on the workpiece material and make cuts corresponding to their depth.

Bars - blanks for the sides of the shelf

The optimal width of the shelf is at least 62 cm in order to accommodate at least several pairs in one compartment. Each shelf involves the creation of four blanks of a certain length. After this, pre-made blanks are inserted into the prepared recesses and fastened together with the structure with self-tapping screws. Do the same with the remaining shelves, then sand them thoroughly. special paper sharp elements of the side parts. Each individual shelf will look like this:

Assembling one shelf section

The height of the self-made shelf is approximately 80 cm. The lower part is mounted at a distance of 25 cm from the floor to accommodate tall types of shoes. The stands are made from wooden planks, 80 cm high. To create them, a special cut is made to the thickness and depth of the timber (16 mm) at a distance of 25 cm from each other. It is recommended to leave 10 cm at the top for the top of the shelf. You should prepare four identical racks, and then insert the finished shelves into the pre-cut areas.

Connecting sections to each other with sidewalls

Using this technology, you can also create a wall shelf with your own hands, which is especially suitable for hallways with a small square footage. Ready-made options with photos are easy to find on the Internet and choose suitable option.

From the remaining material it is necessary to make the upper part of the shelf. To do this, special blanks of 33 cm are cut out. The top of the bars is carefully cleaned using sanding paper, but if possible it is better to use a grinding machine. Ready product covered with several layers of varnish, and parts of the shelf are secured with self-tapping screws.

It is necessary to use 4 self-tapping screws for each shelf and 2 top fastenings.

You can create almost any shoe rack yourself. There are many photos on the Internet ready-made options, but if you wish, you can experiment and make an exclusive piece of furniture. The main thing is to have a little imagination and all the materials necessary for the work.

Unusual shelf for shoes made of plastic pipes

Shelves from furniture stores do not always fit into the required size. Therefore, today we will try to make some original shoe shelves with my own hands.

The simplest shoe rack from old furniture

First you need to cut the boards into blanks. Standard height between shelves - 23 cm. width should be such that it fits both women's and men's footwear– it should be 30-35 cm. Depending on the number of family members, the size of the shoe rack and its height may vary. The shelves in it are installed on different heights: for children's and adult shoes, shoes, boots and sandals, a large shelf for boots.

Let's say we need to make a shoe rack measuring 100x35x46 cm. For it we will need three side walls measuring 35x45 cm, a top board 100x35 cm and three shelves 47x46 cm.

Shelf 100x35x46 cm

If the surface is too worn, you should first remove the varnish from the boards using sandpaper or a grinder with a special attachment. Since this creates too much dust, it is better to carry out work on the balcony. Damaged areas are puttied.

The boards are fastened together furniture corners using small self-tapping screws 12 mm long. A thin sheet of HDF is attached to the back of the shelf, which is used to line cabinet furniture.

Fastening the shelves

Advice. So that the shelf can be moved close to the wall, in places adjacent to the baseboards bottom part the side walls need to be cut at an angle of 45°.

Shelf made of wood or wooden slats

The principle of making a shoe rack from wood is similar to the previous one. The only difference is in the fastening. To securely fasten the boards together, holes are drilled into the side walls. holes for inserting screws. The same holes are prepared on the crossbars on the end side.

The screws are screwed into the board so that their heads are slightly recessed into the wood by a couple of millimeters. The holes are leveled with sandpaper and puttied. You can also hide the holes using plastic plugs - they are sold at any furniture store.

To strengthen the product, additional fasteners are attached to its rear ends. metal corners. Before starting work, small irregularities are smoothed out with a grinder, grinder or emery cloth.

Connection of bars

Shoe rack made of wood

You can darken wood using water-soluble or alcohol-based stains- a dye that gives wood specific color. You can replace it with a regular one potassium permanganate– it paints excellently wooden surfaces. To ensure an even coating, the wood must be slightly moistened before painting. After painting, the product is varnished and thoroughly dried.

Stain treatment

Another option for a wooden shoe rack

Advice. A shoe rack can be turned into original ottoman, if you cover its upper part with foam rubber and cover it with fabric of a suitable color.

Ottoman-shelf for shoes

Original round shelf

1. To make a rounded shoe rack using a jigsaw, you need to cut out round blanks. Their diameter should be about 600 cm. You can replace the compass with a nail driven into the center, with a pencil attached to it on a cord. After cutting, the edges are carefully sanded with sandpaper or a sander.

2. Now let's start manufacturing crossbars. You will need 8 of them (4 for fastening between the lower and middle workpieces and 4 for installing between the middle and upper). The size of each of these parts is 160x200 mm. After cutting, they are also polished.

3. On the bottom side round blanks We mark the places where the partitions are attached. To do this, draw two straight lines with a pencil at an angle of 90° to each other. The intersection should be exactly in the center of the workpiece.

4. On each line we drill 4 holes for inserting screws. We prepare the same holes at the ends of the crossbars.

5. Now all that remains is to fasten the parts together and paint the shelf in any color or cover it with stain or varnish.

Round shelf

6. You can make a shelf like this angular, if you use only 1/4 of the rounded workpiece.

Corner semicircular shelf

Wall mounted shoe rack

To save space in the hallway, shoe shelves can be made hanging. Attaching them to the wall is easy. To do this you will need a hammer drill or drill, anchors (L-shaped hooks), dowels, a screwdriver and the shelves themselves:

Metal suspension (anchor)

To ensure that the shelves are positioned strictly horizontally, we mark the wall using a building level; We place attachment points on the resulting line;

Drill the required holes in the wall;

We prepare the same holes in the shelf itself;

We insert dowels into them and screw the boards to the wall.

Advice. It is better to drill at a slight angle to the ceiling. In this case, the fastening will be more reliable, and the shelves will fit more tightly to the wall.

You can also attach shelves to the wall using metal profiles

Shoe rack made of metal pipes and PVC pipes

Original designer shelf can be made from metal and wood in a matter of minutes. For this you will need:

Wooden, stained or painted boards;

Metal pipes;

Angle adapters;

Connecting couplings (when using pipe scraps of insufficient length);

Plastic plugs for legs;

Rust neutralizer.

Flanges for metal pipes

First, the metal must be treated from rust using neutralizer(special liquid). Next, the pipes are cut into pieces, and metal structure assembled using corner adapters. The pipes are attached to the shelves using flanges. To prevent the metal from rusting in the future, finished design Can be painted or treated with clear or colored varnish.

Shelf made of metal pipes and wooden boards

Such a shelf can also be made from water pipes. PVC pipes . To do this, they are cut into pieces of the required length, drilled into them through holes for fastening shelves, and corners, tees or plugs (fitting connections) are put on the ends. All that remains is to cut the boards or fiberboard of the required size and install them on the shelves.

Video: DIY shoe rack (shoe rack)

When entering a home, a person finds himself in a hallway, which should be functional. It is not easy to equip it correctly because small sizes, but it is necessary to provide a place to store shoes. To do this, you don’t have to buy expensive furniture - you can make shelves for shoes in the hallway yourself. Lack of space forces owners to choose multifunctional solutions. For example, a clothes hanger can be combined with a shoe rack.

Every owner wants his home to look perfect, and for the pieces of furniture to combine and complement each other. To do this, from the huge variety of shoe stands that can be seen in the photo, you need to choose the appropriate option. The main requirements for them are versatility and compactness.

Types of shelves

The choice of shelves depends on the number of shoes, area and style of decoration of the room. They should be simple and reliable, they should be easy to make with your own hands. This universal solution which saves space and has an attractive appearance. Shelves are placed at the bottom of the wall. An ordinary hanger consisting of a row of hooks and a small shelf-bench, under which shoes for daily use are stored, will perfectly complement the interior. A good solution is a rack, the upper part of which will become a bench. It is usually equipped open shelves(example - in the photo).

Externally, such shelves in the hallway resemble cabinets, but do not have doors and often they also lack side walls. There are drawers or doors under the seat, and a stylish hanger can stand next to it. The rack will allow you to put things in order, it is practical and universal option. Models with open and closed shelves, in which the shoes are placed on the entire sole.

A slim cabinet with folding doors is suitable even for a very small hallway. Shoes will not gather dust, but they should only be placed in the cabinet when they are dry and clean. The open hanger with shelves and seat is practical and convenient. It will fit clothes and shoes used every day. To store shoes not used this season, provide closed systems. Special stands are made from ordinary cardboard boxes, they are covered with material that does not get wet and covered with pebbles. Shoe shelves in the hallway they make horizontal, multi-tiered, vertical. Creating own design products can be made combined option, combining several types in one design.

Shelf materials

There are a huge number of materials suitable for making shelves and racks for shoes. Please note the following before starting work:

• budget for making shelves;
• the number of people who will use the shelves;
• will this model of rack or shelves be combined with a hanger;
• Is a seat (bench) on top required?

The following materials are used to make shelves: metal, wood, plastic, etc. Narrow and corner models are made from chipboard. Shelves of the simplest design are attached to the wall and take up minimal space. They look quite original and do not reduce the space of the hallway.

From natural wood make shoe racks for classic interiors. Wood is an affordable and environmentally friendly material and is easy to process.

A DIY shoe rack made of metal will provide natural ventilation. Her distinctive feature is that the metal will not absorb odors. This shelf can be decorated additional elements and add personality. The metal does not rot and does not get wet. If it is treated with an anti-corrosion compound, it will not rust. Metal shelf, as a rule, is mounted on a wall or mounted on racks.

How to make a shoe rack with your own hands

The easiest way is to make shoe racks with your own hands. To do this you will need the usual tools and materials:

• wooden bars – 6 pcs.;
• self-tapping screws (3 mm – diameter, 25 mm – length);

When making a shoe rack with your own hands, you need to start by making the side parts. To do this, prepare 6 identical bars 33 cm long (33 cm is the required depth, which will allow you to place shoes of any size on the future shelf). Then evenly distribute the 4 remaining bars on the workpiece and make cuts on them of the required depth.

The universal width of the shelf is at least 62 cm. It will allow you to place several pairs of shoes in one compartment at the same time. Each shelf is made from two blanks, which are attached to each other with self-tapping screws. After all installation work sharp and rough parts of the shelves are sanded using special paper.

The height of a shoe rack made with your own hands will be approximately 80 cm. Its lower part is located at a distance of at least 25 cm from the floor, which will allow you to place boots and other types of high shoes.

Racks for shelves can be made from planks 80 cm long. Special cuts are made on them the size of the thickness of the timber (in in this case– 16 mm), the distance between cuts should be 25 cm. The shelves are inserted into four prepared racks with pre-cut sections.

The upper part of the rack is made from the materials that remain after preparing the shelves and racks for them. To do this, 33 cm bars are sanded, varnished and fastened with self-tapping screws to the finished structure.

Note! If you use 4 screws for each shelf, then you will only need 2 screws to secure the top part.

Remember that you can create any structure for storing shoes with your own hands, be it a rack, a cabinet or a regular one. hanging shelf on the wall. You can find quite a few ready-made options on the Internet, but if you have the time and desire, experiment. This way you can get an exclusive piece of furniture that all guests will admire. Everything you need to create shoe shelves in the hallway with your own hands - it’s a little imagination and basic consumables.

Practical and versatile products are very popular. We recommend choosing multifunctional models that can easily change their appearance. When choosing a shoe storage option, focus on your habits and the ease of use of the rack or shelves in your hallway. For example, for a large number of shoes, you can choose a high rotating rack.

From the materials available in the house, which, for example, remained after renovation, it is quite easy to create original shelf or a DIY shoe hanger. A wire hanger will become in an interesting way solving the problem of storing house shoes in a small hallway.

Often in small corridor special holders and hanging containers are installed. Hanging furniture will be a great way to place shoes in small room. Wall shelf will give the room additional volume and save space on the floor. We recommend hanging doors on the shelf to hide its contents. In this case, the room will look tidier. If you place a multi-tiered structure along the wall, it will fit not only shoes b, but also, for example, umbrellas with bags.

The carousel shelf is assembled from several round parts. It provides a separate place for each pair of shoes.

Old wooden or metal staircase Easily converts into a convenient storage system. The ladder is very easy to attach to the wall. Additionally, it can be painted in the desired color, and hooks can be attached to the crossbars.

Autonomous systems, like the one in the photo below, can be used to sort shoes. Ordinary pallets, decorated with paintings or appliqués, will become reliable storage containers and decorate the interior of your hallway.

By using your imagination, you can simply create an original shelf for storing shoes that are still in use. for a long time All household members and guests will admire it.