Unusual shelves for shoes with your own hands. DIY shoe rack - a wide range of design possibilities

Inhabitants small apartments Often faced with the problem of storing shoes. Two or three pairs per season for one person is the required minimum, so even a small family of 3 people needs a design that allows them to compactly place shoes in the hallway.

Shoe storage options

There are several main reasons to make a shoe rack yourself. Undoubtedly, it is easier to purchase ready-made furniture, but often standard sizes not suitable for small rooms. The situation when shoes need storage at the dacha is also more practical to solve on our own from scrap materials, without resorting to additional costs. The third side of the issue is the desire to create an exclusive design, striking in its originality and unconventional approach. Let's consider various options installation of shelves for shoes, depending on the final goals - to save space or budget.

From the point of view of saving money, the material for making the shelf is chosen as accessible as possible: it can be carton boxes or cheap plywood. The design of such shoe shelves depends solely on the owner’s imagination:

• From disassembled boxes, using tape and staples, the classic shape of a shoe rack with vertical posts and crossbars is assembled;
• Several cardboard containers of suitable shape are fixed together into a vertical shelf, and then attached to the wall. Its minimal depth allows the structure to be installed even behind a door.

Note! This shelf model is suitable exclusively for light shoes. To store winter boots, you will have to take care of a more secure place.

The plywood construction allows you to achieve good combination cheapness and originality. To do this, assemble a frame in the form of a box, after which it is equipped inside with shelves with asymmetrical curves, allowing you to place shoes various shapes and sizes.

For adherents of a classic interior, it is better to make traditional shelves for shoes made of wood or combined with metal elements. They can differ in height, have a variety of configurations, and be additionally equipped with doors. It all depends on the material possibilities, the area where the premises will be located and the design of the premises.

For those who like to impress others or simply push away from the usual forms, they will like non-standard approaches in the form of using PVC pipes or equipping a kind of shoe shoe that simultaneously performs two functions: storing and drying shoes.

Budget offers

Available materials in the form of cardboard, plywood or slats will allow you to build a shelf for shoes without additional expenses.

Cardboard

Most economical solution question - the use of cardboard. Such a product would be appropriate to place in a country house, but in some cases, with a creative approach to design, a shoe rack made of cardboard can be installed in an apartment. One option involves the following steps:

• Markings are made on cardboard boxes with a pencil;
• elements of the blanks are cut out with a special knife;
• boxes are formed from rectangles;
• the blanks are connected to each other, forming grooves for shoes;
• the elements are connected to each other by brackets;
• the shelf is fixed to the wall.

As mentioned above, it is also possible to build a standard model, where transverse elements are attached between the vertical parts. The connection is made using tape and staples. Decorating it with decorative film will help give a cardboard shoe rack a more aesthetically pleasing appearance.

Plywood

A shelf made of plywood will last much longer. To make it you will need:

• jigsaw and drill;
• perforator and hammer;
• pins and glue.

Having built a frame of the required dimensions, the internal filling with shelves is done at your discretion, depending on the number of shoes stored and their size.

Important ! Before joining, all parts are thoroughly sanded.

A more simplified model is a shelf assembled from U-shaped elements that can be attached directly to the wall or fixed on a previously prepared panel. As in the case of cardboard, it is recommended to cover the final structure with decorative film. This will not only make it attractive, but will also protect it from moisture, making it easier to care for.

Reiki

Slats can be a practical solution for a summer house. Minimum Required tools: screwdriver, hammer and nails. The design of the shelves in this case may be different, but all options have advantages, these are:

• saving costs on purchasing materials;
• ease of manufacture;
• good ventilation.

What models can be built from slats:

• The most primitive one is to connect two slats of different widths. There is a wider part at the bottom and a narrow one at the top. Shoes are inserted into the shelf with the toe.
• The following design of a shelf made of slats resembles the semblance of a pallet placed vertically. Pinned to vertical racks cross bars, the shelf is additionally equipped with slats for fixing to the wall.
• It's also easy to make a traditional shoe rack shape. For comfort top part can be equipped with an ottoman.

It is worth noting that in each case it is better to carefully treat the slats so as not to damage the shoes in the future. At the final stage, it is preferable to carry out finishing work, be it painting or varnishing.

Classic designs

Traditional models of shoe racks are made of wood, chipboard and metal elements. In most cases you will need:

• saw and plane;
• screwdriver and screws;
• metal corners;
• sandpaper;
• wood glue;
• tape measure and pencil;
• finishing material (paint or varnish).

An essential condition is preliminary design. You can use ready-made diagrams or draw a sketch of a shoe rack yourself.

Tree

Let's talk about one of the many options. A suitable material would be a board with a width of 25-35 cm, the thickness of the workpiece is 2 cm. Manufacturing includes the following steps:

• The vertical side walls are being prepared. The height of the parts is 80-90 cm.
• For shelves, 4 fragments 60-70 cm wide are cut out;
• All items are processed sandpaper;
• Using self-tapping screws, the crossbars are connected to the side walls.
• To enhance strength, metal corners are fixed at the rear ends of the shelf.
• The final stage consists of finishing works- after treatment with primer or stain, the shoe rack is painted or varnished.

Chipboard and MDF

A shoe rack made of chipboard with an ottoman combines practicality and attractiveness. In the process of preparing parts according to the selected project, it may be necessary to remove chips and irregularities using a sander. Edges ready-made elements The future shoe shelf is covered with a special tape using a hot iron. Fine-grained sandpaper is useful for sanding corners; this will prevent damage to the shoes during storage. In some cases, slots should be prepared; the parts of the shoe rack are often connected using confirmations. To decorate an ottoman, take care of purchasing foam rubber and leatherette in advance.

Using your imagination, you can make an original and practical shoe rack from laminated chipboard. Material consumption is determined depending on the number of shelves; you will also need to purchase metal tubes and clamps to hold the transverse elements of the structure. The edges of the metal tubes are closed with plastic plugs.

A corner model of a shoe rack will fit well into the interior of a square hallway. The stages of its production are not much different from previous versions:

• a diagram of the future shelf is being prepared;
• for the material you can choose laminated chipboard or MDF;
• parts are cut out according to the selected dimensions;
• All roughness is removed from the edges, after which they are decorated with tape;
• The structure is assembled using confirmations.

The “Slim” shoe rack model has maximum functionality. Accommodating a large number of pairs of shoes, it has a compact size. Making it yourself is extremely difficult due to the large number of accessories. Much easier to purchase finished design and get busy self-assembly. The following diagram will help you:

Use of metal elements

The designs have external lightness, in the manufacture of which they used for the transverse shelves metal elements. Working with such a sketch requires the presence of a grinder, a jigsaw for metal and certain experience. Having blacksmithing skills, you can create an exclusive model of a shoe rack with forged elements.

Extraordinary models

Non-standard shelves also have two directions: shape and material used. Sufficient space in the room allows you to install a round shelf for shoes; its ease of use is facilitated by a rotating mechanism. The most difficult stage will be sawing round blanks and installation of a mechanism to ensure mobility of the device.

Note! The radius of the circle should be larger than the largest shoe size you have in your home.

If we consider non-traditional options for shoe shelves in terms of the chosen material, it could be a stand made of PVC sewer pipes. What does the assembly of such a shelf include:

• Sawing material to length, taking into account shoe size.
• Sanding the edges with sandpaper.
• Decoration of sections with decorative film. In this case, the imitation of birch logs looks very impressive.
• The individual elements of the shelf are connected to each other by plastic holders or belts. If necessary, this design of a shoe rack can easily be supplemented with new cells.

Regardless of which model you like best, important point is the final finishing that can turn the most unpresentable shelf into an exclusive furniture structure.

How to save and make original stand under your own shoes - find out here!Ideas, useful tips, manufacturing instructions.

• 1 Let's do stylish stand DIY under shoes
• 2 Types and purpose homemade shelves for the hallway
• 3 Materials and tools for making shelves
• 4 How to make a shelf with your own hands
• 5 Wooden shoe rack
  • 5.1 What will you need?
  • 5.2 Assembly of the structure
  • 5.3 Practical shoe rack from chipboard
  • 5.4 Beautiful laminate shoe rack
• 6 From profile
  • 6.1 Step-by-step instructions
  • 6.2 Simple shoe rack made from boxes
  • 6.3 Corner stand under shoes
  • 6.4 Construction connection
  • 6.5 Decorative elements
  • 6.6 Making a carousel shelf
  • 6.7 How to do
• 7 Interesting ideas
• 8 Photo gallery

A beautiful shoe rack can become not only a place to store shoes, but also a full-fledged element of the hallway interior. The choice of options in stores is extensive, but the prices are often overpriced. To make a roomy and compact shelf For shoes that fit perfectly into the look of the corridor, you need to put in a little effort and imagination. Let's consider options for making shoe racks from available materials with your own hands.

Types and purposes of homemade shelves for the hallway

Before installation, be sure to measure the space where you plan to place the shoe rack. For small hallway The ideal option would be a narrow (20-30 cm) and high shelf; in a larger room, a closed cabinet with a width of 60-90 cm would look good.

Should the shelf be closed? If you want the hallway to look more aesthetically pleasing, this is a good option. Do not forget to regularly ventilate closed shoe racks, otherwise you will not be able to avoid unpleasant odors. This problem can also be solved by installing a lamp inside for drying and disinfecting shoes.

The advantages of homemade shoe shelves are obvious:

• you can use eco-friendly materials;
• the cost of a homemade shoe rack is several times less than in a store;
• You can make a shelf for a hallway with a non-standard layout.

The design of a shoe rack directly depends on its purpose and the number of residents. Here are some popular and practical options:

There are many options for making shelves. The interior can be decorated with shelves made of metal, in particular aluminum; processed clay shelves, dense oak, and glossy plastic look very beautiful. The material of manufacture can be anything, as can the configuration of the elements. Based on the type of installation, shoe racks can be divided into several types.

Materials and tools for making shelves

The selected material for making a shoe rack determines its service life and ease of use. For example, it’s easier to make a shelf out of a cardboard box, but it won’t last long. But as a temporary option it will work great.

When choosing wood as a material, you should take care of the final treatment of the wood with varnish or paint to ensure an attractive appearance preserved for a long time. Due to the peculiarities of installation and material, there is no universal set of tools. But you will probably need the following tools:

• electric drill;
• glue;
• simple pencil;
• sandpaper;
• fastening fittings;
• screwdriver;
• wood hacksaw;

You will also need varnish or paint, the color of which is selected to match general interior hallway

How to make a shelf with your own hands

Before starting work, it is worth drawing an approximate layout of the future product, where you also need to indicate the dimensions. After this, they begin marking on the material, where they indicate the location of the fasteners (if any), the required length and width. Here are some useful tips:

1. When creating a simple shelf for shoes, you can do without using metal fittings - all elements are fastened with self-tapping screws.
2. The doors are easy to install if you use awnings.
3. Materials should be treated with varnish or painting before assembly. If you do this after, the layer will be uneven, and the procedure itself will be problematic. The process of assembling a shelf for shoes depends not only on the design, but also on the complexity of processing the material, and the features of working with it.

Wooden shoe rack

First of all, a shoe rack should have small dimensions, but at the same time accommodate a sufficient number of pairs of shoes. This is its integral feature. Materials from which you can build this design, many, but the main one is wood. Unlike chipboard and MDF, it will not unstick or swell when exposed to moisture. To do this, the wood should be varnished or painted.

What will you need?

Basic kit for making: wood, glue, screws, glazing beads, varnish or paint. Tools you will need: saw, screwdriver or screwdriver, hammer, sandpaper, drill. Beads, screws, and drills are selected in accordance with the size of the structure. Self-tapping screws need to be small, but capable of being firmly fixed in the structure. Please remember that wood may crack or split if wrong choice screw size.

Assembly of the structure

A depth of 35 centimeters will be sufficient. This distance is enough to accommodate almost any shoe. This will be the length of the sides of the structure. You need to saw off 6 elements of 35 cm each. You can determine who in the family has the largest shoe size and measure the distance along it, leaving 1 cm in reserve. Then you need to distribute 4 bars on one of the elements and make a cut to the depth of the bars. The bars must be spaced evenly.

Each shelf should be able to accommodate 3 pairs of shoes, so its length must be determined based on the 3 largest pairs of shoes in the family. 4 pieces of this length will go on each shelf. To connect the elements, it is necessary to cut out recesses. These places must be secured with self-tapping screws. For a more aesthetic look, you can drill holes and use glazing beads and glue that will hold the shoes without any problems. This operation is similar for each shelf. After this, sand the tops of the side panels with sandpaper.

Any height can be set, but a reasonable limit is no higher than 80 cm. High shoes should fit in one of the compartments of the structure. The distance between the shelves (between the floor and the first shelf) should be 30 cm. All connections are made in the same way.

Practical shoe rack made of chipboard

To make a simple shelf for shoes from chipboard, you need to take two sheets of canvas (the dimensions are determined based on the space in the hallway). Will need fiberboard sheet for the back wall. The assembly algorithm is simple:

• We attach the bottom and the shelves themselves to the two side walls. For the screeds, use a drill (8 mm drill); at the end, use a drill with a diameter of 5 mm.
• The folding element is secured with medium-sized self-tapping screws;
• The upper part is attached to 4*30 self-tapping screws;
• The shelves are mounted inside;
• Secure the back wall of the product.
• This is a budget and uncomplicated option that can be used in any hallway layout.

Beautiful laminate shoe rack

If, after renovating your apartment, there is still unused laminate, you can use it to make a stylish and compact shelf that will fit seamlessly into any design. For production you will need laminate sheets, the number of which depends on the tier and metal pipes with slots. They can be made using a metal grinder. If desired, the structure can be made to any height; for safety, the edges of the tubes are sealed with plugs.

From profile

An interesting option are shelves for shoes made of profiles and tempered glass (or wood). For manufacturing you will need the following tools:

• glass cutter;
• jigsaw;
• Bulgarian;
• level;
• electric drill for metal;
• screwdriver

You can use a regular colored profile or a galvanized one; the second option will be more reliable, as it is resistant to moisture.

Step-by-step instruction

• The profile is attached to the wall with one self-tapping screw;
• Using a level, check the horizontalness of the markings;
• Screw in the remaining screws;
• The frame is assembled;
• Already cut shelves are attached to the frame.
• This option will look good in a Hi-Teck design.

Simple shoe rack made from boxes

The presented design is able to withstand a lot of weight, despite the fact that cardboard is a fairly flexible material. To make it, it is advisable to use boxes from household appliances. Depending on the height and width, take required amount boxes The structure is attached with glue, tape, a stapler or another method. The finished shelf can be decorated as your imagination dictates. There is one drawback - this shelf is only suitable for summer shoes.

Corner shoe stand

Most suitable material to create a corner wooden shelf for shoes - larch. It tolerates dampness well and is easy to use.

First, we decide on the size and design of the shelf, draw a diagram and calculate the required amount of material.
For creating corner shelf necessary following materials and tools:

• two boards up to 2 m long (the ends of the boards can be rounded or cut with a wave);
• shelves cut from the same board (in this case, the shelves can be cut different sizes and forms);
• jigsaw for cutting;
• plane and sandpaper for leveling;
• corners and screws for connecting parts;
• level to check the accuracy of the design;
• antiseptic;
• varnish or paint.

The boards must be sanded and treated with an antiseptic, varnished or painted. Varnish is chosen if you want to emphasize the naturalness and structure of the wood, paint - if preferred rich colors and when deciding to use special design techniques with color play.

Construction connection

To create a lightweight structure, the two main boards are not attached to each other: they are installed at an angle and connected using shelves. First, the lower shelf is attached, then the upper one, the structure is installed vertically and its evenness and stability are checked. Then the remaining shelves are installed.

The space between the shelves must be sufficient, otherwise there will be a feeling of crampedness and congestion.

Decorative elements

For additional decoration of the shelf, you can use thin decorative slats, cut out yourself. Or purchase a decorative wooden lattice partition, and after sawing it, decorate the shelf by adding carved stops.
Using decoupage or aging techniques in painting will also add a fresh touch to the interior of the hallway. Bright color solutions may be relevant to complement the interior.

Making a carousel shelf

The carousel shelf takes up little space and at the same time can accommodate many pairs of shoes. To make it you will need: fiberboard, metal pins and screws.

How to do

Blanks in the form of circles and quadrangles are cut from fiberboard. Using a compass and a strip, markings are made for the pins.
Discs for stands are fixed with discs smaller diameter, which are located at the required height.

Prepare the bottom, on which quadrangular blanks are installed, attached with a corner. The bottom circle is conventionally divided into 3-4 parts (space for 3-4 pairs of shoes on the “floor”).

Interesting ideas

To make a shoe shelf, you can use your imagination and then the most unexpected solutions come to mind. Here are a few ideas that will be of interest not only to independent use, but also as a gift for loved ones.

On video: DIY shoe rack from an old closet

I remembered the famous number from KVN about the married couple Igor and Lena. Lena has a lot of shoes; she has filled a whole closet with them. Igor begins to liberate shoe boxes and it’s hilarious to be indignant at the wife’s irrationality and wastefulness. The audience laughs, the men give a standing ovation. Igor himself has one pair of shoes for all occasions. At the end of the number, sitting peacefully next to his wife, the husband utters the catchphrase:

I realized how many pairs of shoes a woman needs to be happy.

How many?

One more than she has.

To which Lena replies:

What lesson can be drawn from this story? You need to store your shoes correctly and carefully, and then no one will find out how many of them you have and why you need them in such quantities.

Now we will dwell on the problem of storing wearable shoes; in other words, we will tell you where to hide a bunch of shoes, slippers and boots from the corner of the hallway. Simple and rational decision- place it on the shoe shelf. The option of purchasing this piece of furniture in a store seems simple only at first glance. Such a small-sized item is not so easy to find; as a rule, it comes with a set of furniture for the hallway. Separately, it is not always possible to choose something suitable in size, design and wallet. But you can always do it yourself.

And here our imagination and skills acquired in labor lessons come to our aid.

There are a lot of options, let's look at some of them.

How to place shoes at home

First, you need to decide what you want, and most importantly, you can make a shelf for storing shoes. Different materials can be used for this; each of them has its own disadvantages and advantages. A PVC product will be light in weight, easy to clean, because it can be easily washed, but in order to work with it you need a tool and skill. Wood is good for everyone, except that to work with it you need a tool, a place and at least basic knowledge of carpentry. Cardboard is easy to work with and convenient, but during use it can become deformed from pressure and moisture. Look at the options offered and decide which side you are on.

Shoe rack “Woodpile” made of PVC pipes

This option is suitable for placing indoor, summer and demi-season adult shoes or for any children's shoes. High boots will have to be placed separately.

1. We purchase a PVC sewer pipe with a diameter of 30 cm.
2. Use a hacksaw to cut into sections 30–35 cm long, depending on maximum size shoes in the house. A length of 30 cm is enough for size 42. If you need more, attach the boot to the pipe and measure the required length.
3. We sand the edges with fine sandpaper to make them smooth.
4. Since the shelf is called a woodpile, we cover the pipe sections with wood-look wallpaper. If such a design does not fit into the overall concept of the hallway, choose another design that is more suitable in style and color.
5. We glue four blanks together epoxy glue, purchased at a hardware store. We fix the row using clothespins, pliers or special clamps, if available.
6. In the same way, we make two more rows of three blanks each.
7. Let us make a reservation that here we offer one of many options for combining design fragments. If you wish, you can assemble a shoe rack of a different shape and size. There can be as many sections as you like, up to occupying the entire wall with them, if it is functionally justified (it is inconvenient to get shoes from a great height, but you can place out-of-season or rarely used items there).
8. We assemble a “woodpile” from three rows of cells in the following order: at the bottom and at the top there are rows of three sections, in the middle - of four. We put it against the wall.
9. Voila, original rack ready for shoes.

The “Woodpile” rack is good for everyone, but it would hardly suit Lena from KVN. After all, you can put exquisite stilettos in there, but somehow it’s not comme il faut. Especially for Lenin’s stilettos, there is a mega simple version of a shoe shelf called “Cornice”

Photo: Storage option “Cornice”

It is convenient to place high-heeled shoes on the ledge Unusual uses cornice, as a shelf for “studs” Any cornice is suitable for serving as a shoe shelf You can organize an entire shoe rack by attaching several curtain rods under each other.

1. Take any window cornice and cut off part of the required length.
2. Attach the cornice to the wall.
3. We hook the shoes with the heels to the cornice and hang them up. It turns out to be a witty shelf for your favorite heels.

DIY wooden shelf “Bristles”

Making this shelf requires a little more work than the previous two.

It is made from plywood and shoe brushes.

1. The first thing you need to determine is the length and width of the future shelf. In order to calculate the length as accurately as possible, you should take into account the parameters of the plywood and the number of brushes that you intend to place on this plywood. The width of this part of the shelf should be 5 cm greater than the width of the brush.
2. Having decided on the parameters, cut out 2 identical blanks.
3. We connect them together with a “book” as shown in the picture.
4. We drill holes on the long part of the shelf at a distance of 1 cm from the edge. We place the second board on its end and use screws to connect the two fragments. On the sides we attach a square of the same width from the same plywood.
5. If the brushes have handles, cut off the handles. We straighten the edges of the cut using a file.
6. We drill holes in each brush on both sides. We screw the brushes to the inner surface of the shelf with the bristles facing out, as shown in the photo. The first part of the shelf is ready.
7. For the second part, we take a sheet of plywood and make it the same length as the first, and 35–40 cm wide, depending on the largest shoe size in the house. Width 35 cm is designed for shoes size 43.
8. We saw off another board of the same length, 15 cm wide.
9. We attach the small board to the large one with screws so that we get a side (we drill holes in the large one 1 cm from the edge, attach the small one with the end and drive the screws into the holes on one side and into the end of the board on the other side).
10. On the opposite side from the side we drill 3 holes closer to the corners of the large board in the following way: one hole on the long side, two on the short side. The distance between the holes depends on the width of the first part of the shelf with the brushes inside. Suppose the width of the shelf is 15 cm, then we make holes at a distance of 2.12 cm from the corner. On the long side we make an indent of 5 cm from the corner.
11. Using screws, we assemble a shelf from two blanks.
12. Paint the finished shelf in your favorite color. After the paint has dried, drill 2 holes in the central board and attach all this splendor to the wall.

Using the same principle, you can make a simpler version. Essentially, these are just two planks nailed to the wall parallel to each other at a close distance.

Shoe rack “Carousel”

If there is a person in the family who has the skills of a carpenter, has tools and a workshop, and at the same time, for some unknown reason, does not know how to make a shoe rack, show him this video. Everything looks easy and accessible on the screen. Just first you need to prepare: a sheet of plywood, nails, wood glue, turntables, paint.

Video: how to make a shelf from improvised means for storing shoes

And now, pay attention to the screen:

Simple production of pockets from cardboard “Guests on the threshold”

Anti-waiting cardboard is often used in making shoe storage sections. Although it sounds a little fantastic. The video shows how you can make durable and original pockets for storing slippers and summer shoes, armed only with a cardboard box from a vacuum cleaner, scissors and good glue. Even the most physically unprepared segments of the population - old people, women and children - can easily do such a thing. So, get it household appliances out of the boxes and start actively viewing.

Another cardboard version of a shoe rack from the “get creative with the kids” series.

Shoe rack “Triangle”

We take as a basis the same cardboard boxes, the design potential of which is as inexhaustible as an atom.

So, we will need: cardboard boxes, colored wide tape, scissors, ruler, glue.

1. We cut out a rectangle from cardboard with sides 45x35 cm, so that even a large shoe can find a home on the shelf.
2. Using a ruler, make 2 folds at a distance of 15 cm from the edges of the long side.
3. We cover the edge of the side from which the folds go vertically with tape - this will be the front façade of our section.
4. We fold a triangle along the folds, paste it with tape on top along the edge, and also in several other places along the fold.
5. In our case, we make a total of 13 sections in a similar way. You can vary this number in any direction at your discretion.
6. We assemble the bottom row of the rack from four sections. We glue them together with tape. You can stop there, or you can glue a sheet of cardboard with glue to strengthen the structure, but this will not add elegance to your structure.
7. We assemble the second row of five modules, fasten them together and tape them to the bottom row. And so on.

Attention! The peculiarity of cardboard structures is that you cannot store wet and dirty shoes in them.

Shoe cabinet “Magic box”

Do you live near a grocery store and are you annoyed by the stack of boxes outside your windows? Your husband bought a case of beer and now you have a drunk man, glass containers and an empty case in your house? Then you're in luck! Make a drawer into a bedside table or shoe shelf because... physical work calms the nerves!

You can simply move a plastic box to the wall in the hallway, cover it with rubble and place dirty and wet boots and shoes in it. You can also use a tray with sides or a plastic tray for these purposes.

Several boxes are easily fastened together with a plastic clamp or ordinary wire, placed “on the butt”, moved towards the wall, or better yet, attached with the same wire to a pipe or some other protrusion, and now we have several sections for storing shoes or something more.

You will have to tinker a little with wooden boxes.

1. Sand the surface of the box with fine sandpaper.
2. Cover with paint.
3. Hang on the wall.

You can also adapt wooden pallet.

It’s not easy to make such a shoe rack, but it’s very simple. Eco-friendly shoe racks made from wooden boxes You can make a cabinet out of the boxes by placing them on top of each other and securing them with nails The pallet can be converted into convenient shelf for boots and sneakers

Shoes underfoot in the hallway create inconvenience and clutter up the space. Buying a special shelf or even a cabinet is expensive for many people, and why should it, if from scrap materials in the house and garage you can create not only a functional structure, but also emphasize the design of the hallway. For assembly we will use both standard wood materials and non-standard ones - PVC pipes, pallets and even cardboard.

Depending on what kind of shoes you store in the hallway, the diameter of the pipes will depend. Let's start with more simple option, which is suitable for storing demi-season, summer, children's, and house shoes. We use PVC sewer pipes with a diameter of 110 mm as the basis. This is enough to accommodate shoes up to size 42. For larger shoes, we recommend using pipes with a diameter of 160 or 200 mm. Additionally, for shoes, you will need a hacksaw, a tie belt, aerosol can with paint. The work order is as follows:

1. 1. Cut off the required length of pipe with a hacksaw. We recommend 30 cm, but you can make the length shorter or longer, it will all depend on the size of your shoes. One such pipe is a cell for one or a pair of shoes. We make as many of these cells as you need to accommodate the entire collection.
2. 2. Sand the sharp edges formed after cutting with sandpaper
3. 3. To make the shelf fit better with the interior, paint it in the chosen color. It is more convenient to work with spray paint, but you can use other materials
4. 4. We arrange the pipes in a pyramid and tighten them with a belt.
5. 5. Insert shoes into each cell and enjoy the result.

It is better to fasten pipes for such a shelf with liquid nails

But if you need a larger shelf for shoes in the hallway, we purchase PVC sewer pipes with a diameter of 300 mm. It will certainly fit not only shoes and sneakers, but also long boots. We divide the selected pipe into equal sections using a hacksaw and also clean the sharp edges with sandpaper. To decorate the compartments, we suggest using paper wallpaper or self-adhesive vinyl film. Decorate not only the outside, but also inner part so that the shelf has a complete look. Insulating or fabric tape of a suitable size will help hide the joints formed along the edges. Next, we fasten the blanks together using hot glue or bolt fastening. You adjust the number of sections in each row yourself. They can be the same, presented in the form of a pyramid or a honeycomb, your imagination is at work here.

Classic wooden shelving unit

A shelf for storing shoes made of wood is a simple and convenient option. Due to the fact that wood lends itself well to processing, it is easy to work with. To achieve the desired shape and size, you will need a plane, Sander, saw, hammer, set of screwdrivers, as well as a pencil and tape measure for marking. To create shelves, we prepare in advance: wooden blocks and strips, screws, varnish for opening.

We saw off six equal bars 33 cm long. These will be the sides of the structure, 2 for each shelf. Their length is the depth of the rack, which is enough to comfortably store an adult pair of shoes. Using a plane, we make cuts on the sides of the sidewalls that correspond to the depth of the long bars on which the shoes will stand. For each shelf, we suggest providing 4 cross beams about 62 cm long, so that several pairs of shoes can comfortably fit on one tier. We insert the long beams into the recesses made in the sidewalls and fasten them together with self-tapping screws. We carry out the same procedure with the remaining shelves, you choose their number yourself. Sand sharp edges with sandpaper.

The optimal distance between each shelf should be at least 25 cm so that you have the opportunity to place not only short boots, but also long boots. In our case, the total height of the structure will be slightly more than 80 cm and consist of three shelves. To connect the shelves we use wooden planks, we also make cuts in them to the depth of the timber every 25 cm.

In our case, we make the lower cuts at a distance of 25 cm from each other, and the last one at 33 cm. Thus, after connecting the shelves, the upper part of the structure will protrude literally 7 cm, this is enough. We cover the upper side strips with a cross bar, making a side. We grind the sharp edges with a machine or sandpaper, and open the structure with several layers of varnish. The shoe shelf is ready. With your own hands, you can fit at least three pairs of shoes on one shelf.

In order to make this unusual shelf, you will need plywood and shoe brushes, maybe old Soviet ones. First, let's decide on the dimensions of the upper part. We measure the dimensions of the future shelf. The length of the structure will depend on the number of brushes. Make the depth of the shelf 5 cm greater than the width of the brush. We have decided on the dimensions, now we cut out two absolutely identical blanks and connect them together with a “book”, we get an angle of 90°. To connect the parts, we retreat 1 cm from the edge of the bottom of the shelf and connect both ends with a screw. We do the same with the second side. Next, we cut out two identical squares from plywood, the sides of which correspond to the width of the shelf, and fix them on both sides, closing the corner.

Let's do the brushes. If they have handles, cut them off with a hacksaw and smooth out the rough edges with a file. We drill two holes in each brush on each side, using screws we screw them to the bottom of the shelf in one or several rows - it all depends on the quantity. The first part of the structure is ready, set it aside.

If the brushes have handles, they need to be sawed off

Let's take another sheet of plywood. It should be equal to the length of the first part, and its width should correspond to the large size shoes On average you will get 35–40 cm, which corresponds to size 43–44. To make the bottom side, we cut out another plywood board equal to total length and 15 cm wide. We fix both parts at 90°, connecting the ends according to the same principle as in the first part of the structure. We get a side for shoes.

Now we connect the first and second blanks together with screws, paying special attention to the corners. We paint it, and when the paint dries, we make two side holes in the back panel for wall mounting. This shoe rack will fit into any hallway and will not take up much space. Thanks to the brush holders, the shoes will not fall over.

This shoe rack is more complicated. To make it yourself, you will need certain carpentry skills, additional tools and materials that may not be available in the arsenal. Let's look at two options for a round rotating shelf with shelves - regular and with a soft pouf for sitting.

Using a jigsaw, we create circles from wooden slabs and mark out the sections

For the first option, we prepare a wooden slab 12 mm thick and cut it into three equal squares of 70 cm each. These will be the bases for the shelves. If you want to make the shelf taller, cut out more blanks. Square shape We turn the cut slab into a circle with a radius of 35 cm using an electric jigsaw. We cut the slab into equal planks - these are the walls of the sector, in each of which there will be a pair of shoes. Moreover, they should not be the same in height in each tier. For example, for the lower shelf they can be made higher, sections for high boots, and the upper ones can be made symmetrical for shoes and sneakers. To make the sectors even, use a protractor to mark the angles of 60°, and use a ruler to make markings on both sides of the circle. We nail nails onto each line of the sector until we bring them all the way. We apply liquid nails to the markings and fasten the board, finally fixing it with reverse side iron nails. We do the same with the rest of the shelves.

Let's do wooden frame To raise the shelf above ground level, connect it to the bottom shelf. Next, paint all the elements in your favorite color, after sanding the edges. We recommend using white paint and a black border for contrast. To ensure that each shelf rotates freely, we install turntables between the tiers, fix them strictly in the center, having previously drilled a hole for the bolt and nut.

The final stage will be painting the shelf

The second option is a rotating shoe rack with soft seat. General principle its build is unchanged. However, instead of three or more tiers, we recommend making two, adjusting the comfortable seating height. Also, instead of a frame base, you can attach wheels to make the shelf mobile. We make the upper part of the bookcase soft. We use batting as a base. We cut out two circles from the filler corresponding to the diameter of the shelf, and two more smaller ones, about 7–10 cm. When laying the batting, we get a protrusion. It's time for upholstery. We cut the fabric along the diameter of the circle with a margin of at least 5 cm. We fix it around the entire perimeter using construction stapler. You will learn more about at what distance to fasten the staples and how to select upholstery material in the article about. We cut off the excess fabric, and to hide the staples, we frame the outline with upholstery tape.

Cardboard shoe shelves, like other cardboard furniture, are gaining more and more popularity in interior design. The base used is ordinary cardboard boxes, which are found in almost everyone’s home. If you don’t have them, think about the nearest store or warehouse, where such boxes lie in a crowd unused. Besides corrugated cardboard To work you will need colored wide tape, scissors, a ruler and a glue gun; if you don’t have one, you can use regular PVA.

Cardboard rectangles are folded into triangles

We prepare the cardboard by cutting out a rectangle with sides 45x35 cm. This size will be optimal for both small and big couple shoes We measure 15 cm from each edge with a ruler and make folds. We cover the sides that we will bend into a triangle with colored tape; this will be the central part of the stand. We fold the cardboard into a triangle along the folds and secure it along the edges and center with colored tape. We repeat the same manipulations with all other sections - we choose their number at your discretion. After you have completed all the sections according to plan, we begin assembling the cardboard shelf. We fasten the bottom row of triangles together with colored tape, and for reliability we go over the joints with a glue gun. We do the same with the remaining rows, fastening them together. When finished, you will have a shoe stand made from triangles. We store shoes in through sections.

Attention, in order for the design to serve you for a long time, shoes must always be dry and clean.

Another budget invention made from cardboard is vertical shelves for shoes. It’s easy to make such a design with your own hands. It is ideal for storing slippers, shoes, sneakers and summer shoes in the hallway and does not take up much space. For work you will need a sheet of cardboard 70x60 cm.

We retreat 2.5 cm along the length of the cardboard from the edges. From these points we measure a vertical line of 25 cm and draw a horizontal segment 20 cm long. We connect the sides, we get a rectangle of 25x20 cm. A square of 25x25 cm is formed between the two rectangles. we retreat the upper corners of the square by 11 cm. We draw diagonals in bottom corners square and we get two triangles on both sides. Draw a rectangle with sides 35x25 cm from the square down. As a result, you should get a T-shaped blank, where the protrusions are two equal rectangles with sides 25x20 cm, and the central part is a square 25x20 cm and a rectangle 35x25 see. Cut off all excess.

To work you will need a large sheet of cardboard.

Now we bend the cardboard along the lines, first vertical in the center, and then diagonal. To avoid damaging the material, use a ruler to make an even bend. After this, lift the bottom rectangle (35x25 cm), then the T-shaped top and wrap the diagonal bends behind the base on both sides. In your toga you should have a pocket with triangular ribs on the sides. Fixing the bends on the back side of the base regular glue for cardboard. For reliability, we recommend a glue gun. We make several such pocket shelves, and then connect them together by the upper protrusion with the same glue. You adjust the number of sections yourself. If desired, the shelves can be decorated, painted and upholstered with twine, and covered with self-adhesive film. At the end, we make a hole in the last section and hang a vertical shelf on the wall.

Simple shelves made from boxes and pallets

You can make a shelf for shoes from boxes that can also be found on the farm. To construct them, you will not need to additionally purchase complex parts and tools. If you are the owner of mesh boxes, we fasten them together in a vertical position using a clamp or strong wire. The front part of the shelf remains open, we put shoes. We choose the number of tiers ourselves, it all depends on the size and depth of the boxes.

You can do the same with wooden boxes. To fasten them together you will need nails and a hammer. This design will look better if it is sanded and the wood is painted. If desired, the wooden boxes can not be fastened together, but hung on the wall in a chaotic manner.

However, the simplest shoe stand is constructed from a pallet. All you need to do with it is sand it and repaint it the color you want. Having placed the pallet in a vertical position, we insert shoes into the spaces between the slats. It will hold up well and will not fall.

When entering a home, a person finds himself in a hallway, which should be functional. It is not easy to equip it correctly because small sizes, but it is necessary to provide a place to store shoes. To do this, you don’t have to buy expensive furniture - you can make shelves for shoes in the hallway yourself. Lack of space forces owners to choose multifunctional solutions. For example, a clothes hanger can be combined with a shoe rack.

Every owner wants his home to look perfect, and for the pieces of furniture to combine and complement each other. To do this, from the huge variety of shoe stands that can be seen in the photo, you need to choose suitable option. The main requirements for them are versatility and compactness.

Types of shelves

The choice of shelves depends on the number of shoes, area and style of decoration of the room. They should be simple and reliable, they should be easy to make with your own hands. This universal solution, which saves space and has an attractive appearance. Shelves are placed at the bottom of the wall. An ordinary hanger consisting of a row of hooks and a small shelf-bench, under which shoes for daily use are stored, will perfectly complement the interior. A good solution is a rack, the upper part of which will become a bench. It is usually equipped open shelves(example - in the photo).

Externally, such shelves in the hallway resemble cabinets, but do not have doors and often they also lack side walls. There are drawers or doors under the seat, and a stylish hanger can stand next to it. The rack will allow you to put things in order, it is practical and universal option. Models with open and closed shelves, in which the shoes are placed on the entire sole.

A slim cabinet with folding doors is suitable even for a very small hallway. Shoes will not gather dust, but they should only be placed in the cabinet when they are dry and clean. The open hanger with shelves and seat is practical and convenient. It will fit clothes and shoes used every day. To store shoes not used this season, provide closed systems. Special stands are made from ordinary cardboard boxes, they are covered with material that does not get wet and covered with pebbles. Shoe shelves in the hallway can be made horizontal, multi-tiered, or vertical. Creating own design The product can be made in a combined version, combining several types in one design.

Shelf materials

There are a huge number of materials suitable for making shelves and racks for shoes. Please note the following before starting work:

• budget for making shelves;
• the number of people who will use the shelves;
• will this model of rack or shelves be combined with a hanger;
• Is a seat (bench) on top required?

The following materials are used to make shelves: metal, wood, plastic, etc. Narrow and corner models are made from chipboard. Shelves of the simplest design are attached to the wall and take up minimal space. They look quite original and do not reduce the space of the hallway.

From natural wood make shoe racks for classic interiors. Wood is an affordable and environmentally friendly material and is easy to process.

A DIY shoe rack made of metal will provide natural ventilation. Her distinctive feature is that the metal will not absorb odors. This shelf can be decorated additional elements and add personality. The metal does not rot and does not get wet. If it is treated with an anti-corrosion compound, it will not rust. Metal shelf, as a rule, is mounted on a wall or mounted on racks.

How to make a shoe rack with your own hands

The easiest way is to make shoe racks with your own hands. For this you will need ordinary tools and materials:

• wooden bars – 6 pcs.;
• self-tapping screws (3 mm – diameter, 25 mm – length);

When making a shoe rack with your own hands, you need to start by making the side parts. To do this, prepare 6 identical bars 33 cm long (33 cm is the required depth, which will allow you to place shoes of any size on the future shelf). Then evenly distribute the 4 remaining bars on the workpiece and make cuts on them of the required depth.

The universal width of the shelf is at least 62 cm. It will allow you to place several pairs of shoes in one compartment at the same time. Each shelf is made from two blanks, which are attached to each other with self-tapping screws. After all installation work sharp and rough parts of the shelves are sanded using special paper.

Height of shoe rack made with my own hands, will be approximately 80 cm. Its lower part is located at a distance of at least 25 cm from the floor, which will allow you to place boots and other types of high shoes.

Racks for shelves can be made from planks 80 cm long. Special cuts are made on them the size of the thickness of the timber (in this case - 16 mm), the distance between cuts should be 25 cm. The shelves are inserted into four prepared racks with pre-cut sections.

The upper part of the rack is made from the materials that remain after preparing the shelves and racks for them. To do this, 33 cm bars are sanded, varnished and fastened with self-tapping screws to the finished structure.

Note! If you use 4 screws for each shelf, then you will only need 2 screws to secure the top part.

Remember that you can create any structure for storing shoes with your own hands, be it a rack, a cabinet or a regular one. hanging shelf on the wall. You can find enough on the Internet ready-made options, but if you have the time and desire, experiment. This way you can get an exclusive piece of furniture that all guests will admire. Everything you need to create shoe shelves in the hallway with your own hands - it’s a little imagination and basic consumables.

Practical and versatile products are very popular. We recommend choosing multifunctional models that can easily change their appearance. When choosing a shoe storage option, focus on your habits and the ease of use of the rack or shelves in your hallway. For example, for a large number of shoes, you can choose a high rotating rack.

From the materials available in the house, which, for example, remained after renovation, it is quite easy to create original shelf or a DIY shoe hanger. A wire hanger will become in an interesting way solving the problem of storing house shoes in a small hallway.

Often in small corridor special holders and hanging containers are installed. Hanging furniture will be a great way to place shoes in small room. A wall shelf will add extra volume to the room and save floor space. We recommend hanging doors on the shelf to hide its contents. In this case, the room will look tidier. If you place a multi-tiered structure along the wall, it will fit not only shoes b, but also, for example, umbrellas with bags.

The carousel shelf is assembled from several round parts. It provides a separate place for each pair of shoes.

Old wooden or metal staircase Easily converts into a convenient storage system. The ladder is very easy to attach to the wall. Additionally, it can be painted in the desired color, and hooks can be attached to the crossbars.

Autonomous systems, like the one in the photo below, can be used to sort shoes. Ordinary pallets, decorated with paintings or appliqués, will become reliable storage containers and decorate the interior of your hallway.

Using your imagination, you can simply create an original shelf for storing shoes that for a long time All household members and guests will admire it.