The wood band saw is good. How to choose a band saw machine

We have collected for you photos, characteristics, prices and reviews of the Best Band Saws rating.

• band-saw
• power 710 W
• smooth speed control
• weight 5.7 kg

Price

from 42930 rub. up to 52110 rub.

Reviews of Makita 2107FW

Advantages

Lightweight, powerful, compared to the “monkey” (mounting saw), consumables are free. 1 blade is enough to dissolve 2-3 tons of metal. The cutting accuracy is beyond praise!

Flaws

The machine really lacks a clamp with the ability to cut the workpiece at an angle.

A comment

Well worth the money, perfect for a small workshop.

• band-saw
• power 350 W
• weight 17 kg

Price

from 10976 rub. up to 13390 rub.

Reviews about Zubr ZPL-350-190

Advantages

Flaws

The guides are very weak, it only takes a couple of times to unscrew and tighten, the saws themselves also become dull very quickly, there are no wiring on the blades and only 1 out of 3 are normal, and that’s enough until the first knot.

A comment

There was a sticker stuck on the work surface, I had a hard time scraping it off, but in the store they said I had to heat it with a hairdryer. What do I tell them about the stickers? In general, there is nothing good to say about the canvases; out of 7, one was superb, the rest were so-so, two immediately burst during installation and you can see consumer goods from the welding of the seam. All my expectations were dashed on the first day of work.

• band-saw
• power 900 W
• weight 81.2 kg

Price

from 45680 rub. up to 51,300 rub.

Reviews of Makita LB1200F

Advantages

1) Build quality (best in its price category)
2) Equipment (4 high-quality saws included, not weak demo saws like others, bearing guides)
3) Quality materials and attention to detail
4) An excellent, smooth, cast-iron table (those who have worked on cheaper ones will understand how important this is)
5) Quiet operation (4+, the noise is mainly from the wood and not from the machine)
6) Good rip fence. (aluminum, but attached on 2 sides, so the ride is always smooth)
7) Excellent smooth cut at all speeds (despite vibration)
8) The ability to use improvised means to increase the cutting height to 230 mm!
9) Price/quality ratio - 5+

Flaws

1) Vibration at high speeds (can be treated on the advice of owners from a special forum)
2) The pulleys require fine-tuning (although this is a bit of precision, it doesn’t interfere with the work)
3) The protractor dangles and requires a “file”, but this can be cured
4) Bearing guides (yes, this has both advantages and disadvantages because it can create difficulties when working with resinous or undried wood - sawdust sticks to the bearings) but if desired, you can simply replace them with “crackers”
5) Weight. One of the heaviest (if not the heaviest) semi-professional band saws. For some this is a virtue.

Updated: 12/23/2018 14:32:31

Expert: Boris Mendel

Band saws are great tools for increasing productivity in carpentry and carpentry shops. With their help you can process significantly more materials than using a classic hacksaw or jigsaw. In addition, they make cuts more even and are also suitable for figured cutting.

How to choose a band saw

When choosing a band saw, it is worth determining not only its purpose (wood or metal), but also its class. There are three groups:

1. Household. These are relatively low-performance devices with a power of up to 500 W. They are enough for fairly leisurely processing. various materials. The main advantage of household band saws is the price; they are much cheaper than professional devices, and can cope with most tasks associated with sawing materials during processes such as repairs;
2. Semi-professional. Devices with power from 0.5 to 1.5 kW. Thanks to equipment with a width of up to 100 mm, the productivity of semi-professional wood band saws is up to 10 cubic meters per work shift. Suitable for small carpentry and joinery workshops;
3. Professional. High-power, multifunctional solutions. Connect to three-phase network(380 V). Power – from 1.5 kW. Equipment – ​​up to 300 mm, productivity – up to 15 cubic meters of wood, including frozen wood, per shift. It is recommended to purchase these tools for factories, since even in relatively large workshops their productivity will be excessive.

The main parameters of band saws – both for wood and metal – are:

1. Depth. Distance from tabletop to border. Determines how thick a block can be cut. The most important parameter in combination with power is what you should pay attention to first. For example, household band saws with a depth of up to 60 mm are suitable exclusively for processing boards and sheets (plywood, laminate, etc.), while professional ones with a depth of up to 500 mm can handle even thick logs;
2. Kerf width. Determines the maximum allowable width of the processed board;
3. Canvas material. The best decision– a blade made of carbon steel, and for saws both for wood and metal. It is reliable, durable and sustainable;
4. Number of blade teeth. The best option– 180 or 210 teeth. Such blades provide a smooth, uniform cut;
5. Stops, rotary and tilt table, backlight working area. These additional functions make using a band saw more convenient, especially if required figure cutting;
6. Supports multiple speed modes. Useful feature for saws both for wood and metal. Simplifies the processing of materials with varying degrees of hardness.
7. But the main parameter for a band saw is, of course, class manifested in power.

Rating of the best band saws

The best compact (cordless) bandsaws

Why it: A versatile handheld band saw.

The manufacturer itself positions this saw as a device for metal processing. And this is not surprising. The Milwaukee HD18 BS-402C, despite the fact that it is a manual band saw powered by batteries, has increased power and can easily cope with most tasks for quickly processing any materials - pipes, rods, not too thick trunks and other workpieces.

The cutting width of the device is 85 millimeters, the cutting depth is also 85 millimeters. The belt rotation speed without load is 146 rpm, one mode. The saw is powered by a 4 Ah battery. There is illumination of the working area.

The saw has a rich set of accessories. It comes with two batteries, a charger for them, a saw blade and a transport case.

Advantages

• Rich equipment;
• High power;
• Convenient design.

Flaws

• Relatively small depth and width of cut;
• Slow battery charging.

Why it is: High depth and width of cut.

A cordless hand-held band saw with one of the highest cutting depths and widths in the ranking – they are 120x120 millimeters. This allows this tool to be used for processing relatively large-sized workpieces. Special design The saw makes it easier to use and reduces the strain on your hands during prolonged use.

The saw also has excellent power parameters. According to official information, its power is 710 W, which classifies the device as semi-professional. Smooth adjustment of the belt rotation speed is supported; there are two speed modes, the maximum being 80 meters per minute.

The tool operates from a household network. In addition to the device itself, the delivery set includes a saw blade, a hex key for removing protective casing and installation of the canvas, as well as a transport case.

Advantages

• High power;
• Excellent combination of price and characteristics;
• High width and depth of cut.

Flaws

• The kit does not include a stand, but it is needed, since the device is really powerful;
• Poor placement of speed control;

Why it is: Very light, but still powerful enough for processing wood and similar materials.

The main advantage of this hand saw is its low weight. In fact, this tool is the lightest in the rating, it weighs only 3.8 kg with the battery connected and the tape installed. The manufacturer also calls it the most compact - the dimensions of the device are 34x16 centimeters. Because of this, the width and depth of the cut are 6.3x6.3 cm.

At the same time, the device has a fairly high productivity - the maximum speed of the web is 163 meters per minute. Two speed modes are supported with smooth switching between them. The device is equipped LED backlight working area, anti-vibration pads and a protective shutdown system in case of overheating.

The device runs on 18-volt batteries with a capacity of 2.6 Ah and is equipped with an LED charge level indicator. The delivery set does not include two saw blades, but two saw blades are included.

Advantages

• Very light;
• Powerful;
• Anti-vibration pads reduce hand fatigue.

Flaws

• Batteries are not included;
• Small depth and width of cut;
• There is no supply of cutting fluid.

The best bandsaws for wood

Why it is: Excellent combination of price and performance.

This band saw is intended for use in small and medium-sized carpentry workshops. The device has enough power of 800 watts to process up to 7-10 cubic meters of wood per shift, and thanks to two speeds, you can adjust it to the materials used - so that sawing is as comfortable as possible. The saw is powered from a household 220-volt network.

The device is equipped with an angle stop with a transport scale, thanks to which it can cut at an angle of up to 45 degrees. The work table is made of cast iron. The machine supports fast belt tension. In this case, the maximum cutting depth is 18 centimeters, and the width is 30 centimeters.

An important advantage of the device is the presence of a separate dust extraction pipe. This not only helps improve ventilation of the workplace, but also extends the operating life of the machine.

Advantages

• Sturdy, reliable, durable design;
• Rich equipment;
• Quiet operation.

Flaws

• Complex self-assembly, including due to unsuccessful instructions;
• The saw blade is stamped; burrs need to be removed;
• There is no belt tension indicator.

Why it: Increased power, two speed modes, convenient desktop.

This band saw is equipped with asynchronous motor, which guarantees constant operating parameters and reliability. The power of the device is 1000 W - the highest in its rating segment. Thanks to the powerful motor, the speed of the saw blade is 7.3 or 15 meters per second - this allows you to process workpieces not only from wood or plastic, but also from aluminum alloy.

The machine is equipped with a magnetic starter, which prevents spontaneous start; adjustable stabilizer based on rolling bearings; cast desktop with tilt support up to 45 degrees; connection pipe for connecting a vacuum cleaner or ventilation system; and a limit switch, making tool maintenance safer.

The machine also boasts a rich supply package. Sawing depth – up to 20 cm, width – up to 30 cm.

Advantages

• Quiet operation;
• Several security systems;
• High, stable power.

Flaws

• Inconvenient tension unit;
• Low quality stock saw blade, it is recommended to replace it immediately;
• The pulleys quickly become clogged with sawdust; it is recommended to immediately connect a vacuum cleaner.

The best metal band saws

Why it: High power, support for arbitrary cutting angles, cutting depth up to 125 mm.

The main advantage of this band saw is that it supports cutting at any angle up to 60 degrees. In this case, the drive tilts, rather than the table, which makes it possible to process long workpieces without the need for additional fixation. Maximum depth and the cutting width are 125 millimeters, but only for material placed at an angle of 90 degrees.

The device is equipped with a 1000-watt motor with two speed modes, and the adjustment between them is smooth. Maximum speed is 80 meters per minute. Therefore, this band saw is suitable for processing even some steel parts.

Why she: Low price.

Although the previous band saw in the rating is twice as powerful as this machine (and the Corvette 422 is equipped with a 550-watt drive), it is also suitable for processing some metal workpieces. For example, based on aluminum. The drive supports three operating speeds with stepped switching, so operating parameters can be quickly changed depending on the nature of the work. The maximum idle speed of the saw blade is 50 meters per minute.

The width and depth of the cut of the workpiece, placed at an angle of 90 degrees to the moving blade, is 115 millimeters. But the machine also supports processing at 45 degrees - in this case, the maximum diameter of the material is 70 degrees.

The band saw is equipped with an asynchronous motor, which is reliable and durable. The collapsible design allows the machine to be transported to the work site.

Advantages

• Low price;
• Suitable for a wide variety of materials;
• Rich equipment.

Flaws

• Poor quality stock fabric;
• Weak starter;
• Difficult assembly, unclear instructions.

Attention! This rating is subjective in nature, is not an advertisement and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.

Choose band saw from the variety of saw sizes offered on our market, this is not an easy task. Let's look at the main factors to consider when choosing a band saw:

1. Saw thickness:

The thickness of the saw is determined by the diameter of the pulleys.

• 0.9 mm– thickness ideal for band dividing machines, the saw works well on any pulleys. Has a 20-25% increased resource compared to saws of greater thickness. But there is a limitation when sawing sawlogs: the work must be done at low feed rates in summer time and on pulley diameters less than 40 cm.
• 1.0-1.07 mm– optimal width for work all year round. The work is carried out at medium feeds, but it quickly breaks on pulleys with a diameter of less than 47 cm.
• 1.1 mm or more– cuts workpieces of large diameters well. Work is carried out at high and medium feeds, but it quickly breaks on pulleys less than 55 cm and when the saw is poorly prepared.

2. Saw width:

• 27 mm– the narrowest saw, economical choice. With high-quality training, it shows good results.
• 32-35 mm– optimal in terms of price-quality ratio, works well at medium flows all year round. But if the saw log diameter is more than 60 cm, the feed has to be reduced.
• 38-41 mm– a saw with a slight increase in rigidity, sometimes helps when sawing workpieces over 60 cm.
• 50-54 mm– works great when sawing sawlogs at high speeds with a diameter of more than 60 cm. It quickly breaks on pulleys with a diameter of less than 55 cm if the saw is poorly prepared.

At correct operation the saw can serve until, as a result of re-sharpening, its width is reduced to 60% of the original.

3. Saw tooth pitch:

Tooth pitch is the distance between the top points of adjacent saw teeth.

• 19 mm– requires more engine power, at least 11 kW, and a reduction in feed; a saw with this pitch is stable when working with hardwood and sawlog diameters greater than 60 cm.
• 22 mm– a universal step, the saw is designed to work all year round.
• 25.4 mm– used on saws with a width of 50-54 mm when working at high speeds. A large sinus is capable of carrying a larger amount of sawdust per unit of time.

The tooth pitch is a constant value. When resharpening a saw, you must strive to keep the pitch unchanged! An error of even 0.1 mm is completely unacceptable. For example, on a saw with a length of 4020 mm with a pitch of 22 mm, 183 teeth - an error of 0.1 mm will result in a size error of 18 mm. With each subsequent resharpening, the error will accumulate.

Simonds® (USA) produces saws in the following sizes:

• 0.9 x 27 x 19
• 0.9 x 32 x 19
• 1.1 x 32 x 22
• 1.1 x 38 x 22
• 1.1 x 51 x 22
• 1.1 x 54 x 25.4

4. Tooth shape:

A series of tests were carried out to determine the optimal values ​​for the shape, angles and height of the teeth. The test results formed the basis for the production of all band saws.

Tooth height– the distance between the teeth that removes sawdust, so the depth of the cavity must be sufficient. To increase the service life of the saw, the surface of the saw blade after sharpening should be smooth and even and should not contain scratches, burrs or microscopic cracks.

Tooth profile formed by two angles - anterior and posterior. The optimal rake angle is 10. At this angle, the saw cuts wood of any density and humidity well. Changing the clearance angle has little effect on the sawing process. The choice of saw of one profile or another is determined by the hardness of the wood.

Simonds® (USA) produces saws with the following profiles:

• 9/29 – recommended for hard and frozen wood
• 10/30 – universal profile used for soft and hard wood

5. Divorce:

Setback is the distance by which the tooth is bent in relation to the plane of the saw blade. The spread can be considered ideal when a mixture of 70% sawdust and 30% air remains between the saw blade and the wood. The larger the spread, the wider the cut will be, and accordingly, more engine power is required. The purpose of setting the teeth is to create clearance for the saw in the cut, as it is necessary to reduce friction between the saw and the wood, and also to prevent overheating.

Choosing a saw for specific tasks when sawing, the following factors must be taken into account:

1. Design features sawing machine: main drive motor power, pulley diameter and saw guide system.
2. Hardness of sawn wood:

End hardness, MPa		Breeds
Soft	up to 40	Pine, spruce, cedar, aspen, alder, chestnut, fir, juniper, poplar, linden
Solid	from 40 to 80	Larch, rowan, beech, Siberian birch, oak, elm, elm, elm, plane tree
Very hard	more than 80	White acacia, hornbeam, dogwood, boxwood, yew, pistachios, iron birch

The correct and balanced choice of a band saw is one of the most important criteria for high-quality woodworking and the production of competitive products, as well as long-term operation of the equipment.

Wood processing hand saw at one time it replaced cutting with an ax due to its greater efficiency. But progress does not stand still. Now there are band saws that are noticeably more productive than hand saws, but before purchasing them you need to study their main specifics.

Features and Specifications

It is appropriate to start a conversation about a band saw for wood by outlining its differences from manual versions (hacksaws). It’s easy to notice the external difference; just look at the canvas. Its edge is covered with teeth, which allows you to saw both thick logs and untreated timber. What is important is that other types of tools will not allow you to cope with workpieces large sizes. Band saws are divided into home and professional; One of the differences between these groups is the speed of processing the material, but the width of the blades must also be taken into account.

Design and principle of operation

In addition to the blade, band saws also include cutting parts installed on top of it. When the gear apparatus begins to rotate, the workpieces are divided into parts. In narrow saws, the width of the working teeth does not exceed 5 cm. In wide ones, it is at least 3 cm larger. But the geometry of the cutting teeth also plays a significant role.

If the height of these parts is more than 20% relative to the width of the working area, there is a high risk of blade breakage due to excess load. Attention must, of course, be paid to the accuracy of the placement of the teeth. If the gaps separating them from each other are too small, the tool will fail due to the accumulation of sawdust. In addition to the cutting part and its base, the band saw always has a table for the workpiece being processed and a special motor. Working surface V homemade designs

made from thick wood.

A special pulley is used to transfer force from the motor to the cutting element. It is placed on a wheel of a carefully calculated format. The wheel itself needs to be fixed as carefully as possible. For this purpose, various types of hard stops are used. The surface of the wheel is slightly beveled, otherwise the tape will slip off.

What is it for? But before having a detailed conversation about the types of band saws and the features of their use, it is necessary to clearly indicate for what purpose they will be used. General definition – for sawing logs, doesn’t clarify much. After all, this work can be done by saws of other types. On the other hand, changing the canvas allows you to increase functional characteristics

tool. It becomes possible to use a band saw when processing not only wood, but also plastic, and even metal. The canvas can be placed both vertically and horizontally. What is important is that cutting machines

can be used even by non-professionals. And not only is it easy to apply, but it also produces a very clean cut line. No additional processing (grinding) is required. The cut profile can be changed at your discretion; Elimination of sparks allows you to work as safely as possible.

What are they?

• The main division of band saws includes:
• toothed;
• toothless;

electrospark formats. The toothed product is equipped with a closed sawing circuit. It allows you to saw and cut through the most different materials . The other two types differ only in the type of teeth.

• A hand-held (or portable) band saw can:
• cut down trees in the garden;
• prepare firewood; slice wooden blanks
• according to exact dimensions;

sand wooden furniture.

Devices supplemented with bimetallic blades can be used for processing not only wood, but also metal. The main part of such a canvas is formed by special spring steel. The working area itself is formed from thoroughly sharpened tool steel. But there is another division of paintings:

• for those subjected to hardening throughout the entire volume;
• those not subjected to hardening;
• on flexible blades with strong teeth.

Products whose hardness matches their width are very compatible with medium-diameter pulleys. The harder the teeth, the less they will dull. In addition, the permissible torsion speed of the saw depends on this property. The tabletop belt system, regardless of the strength of the teeth and other parts, has excellent power and operates as reliably as possible. Its important characteristic is the inclination of the working surface, which determines the angle of cutting the material.

The orientation of the canvas is another important criterion for differentiation. Horizontal and vertical band saws are very different from each other. The vertical format of the device can almost rightly be called a large industrial jigsaw. Despite its small dimensions, such a device is capable of working with thick material. Cutting can be done along the most complex trajectory.

Double-sided saws usually have increased cutting accuracy. But in addition to the performance features, it is necessary to take into account other technical specifications, including cutting depth. It can reach from 8 to 50 cm. A thin blade can easily break when working with wood that is difficult to process. If you use a very powerful saw, thin bars are often damaged.

Rating of the best models

Study the technical parameters in general view– good, but not enough. You also need to take a close look at the features of specific modifications. The band saw consistently appears in almost all reviews "Metabo BAS 261 Precision". Mostly favorable reviews are left about her. High-quality German assembly and first-class materials made it possible to create a professional-class machine that can cut without interruption.

Consumers note that this device does not create strong vibration. With its help, you can make cuts at an angle, in a straight line, or in a complex shaped pattern. It is possible to make a radial hole if necessary. The comfortable pusher also brings considerable benefits. The drive is an induction motor with a power of 0.4 kW, which does not create excessive noise. The safety level of this product is no worse than that of other European products.

In addition to the push button to prevent unplanned starting, there is a motor lock after lifting the lid. The developers have provided effective illumination of the work area. A standard adapter provides connection to a vacuum cleaner.

"BAS 261 Precision" equipped with a cast iron frame and a rotating table. The design allows you to make a very precise cut, which is very important for many people. No less relevant is the ability to adjust the height of the cut. The tape changes quickly, and without a key. But no one can name any obvious shortcomings of this model. A band saw is also a good alternative.

"Scheppach Basa 1". This device has a long service life. Compared to the just disassembled modification from Metabo, it is noticeably cheaper. The price reduction was achieved by reducing the width and height of the slot. However, its quality is no worse.

"Scheppach Basa 1" Excellent for woodworking and furniture making. The positive properties of this device are its small size and decent power. The band saw is equipped with an asynchronous motor, which does not require any special maintenance. The engine is protected for high level. The workpieces are securely secured using rubber clamps; as a result, the workpiece does not slip. But we must remember that “Scheppach Basa 1” is not equipped with corner stops.

As for Swiss units, then Jet JWBS-9X can hardly be named budget model. But it is equipped with a high-power engine. It sets in motion a sawing blade 0.3-1 cm wide. The working surface can be illuminated by a built-in lamp, and a comfortable parallel stop is also provided.

The powerful cast frame stands on 4 legs. Beneath them are rubber pads that help suppress vibration. To tension the canvas, you only need a regular thumbscrew. IN basic equipment includes an angle stop equipped with a measuring scale. However, it is worth remembering the limited power of the product.

If this indicator is critical, you should pay attention to "Metabo BAS 318 Precision WNB". It is difficult to find a model equal to this band saw in terms of power. The motor develops a force of almost 1 kW. Impulse transfer to cutting block occurs thanks to a belt mechanism. Although the saw moves at a speed of 880 m per minute, it moves very smoothly and does not jerk. To ensure the required speed and accurately set the direction of movement of the saw, flywheels equipped with rubber linings are used. Thanks to this, it is possible to fully process materials of varying hardness. Illumination is provided. Precision WNB It is distinguished by the atypical design of the bed - it is placed on a trapezoidal platform. This solution is characterized by increased stability.

Returning to German products, it is worth highlighting "FDB Maschinen MJ 350N". This band saw is extremely powerful and of excellent quality. The motor develops a force of 0.75 kW, while the cut is made to a height of up to 20 cm. A very powerful frame is mounted on support legs. Carefully selected rubber pads soften vibration vibrations. The saw can operate at an angle, make a smooth turn, or operate at a strictly adjusted angle.

There are no gaps or errors when cutting wood using this tool. Excellent work accuracy is guaranteed. The pulleys are characterized by optimal balancing. Consumers can choose from two operating speeds. Reviews about the product are quite favorable.

Jet JBS-12 Ideal for processing timber, as well as large-width boards. The designers were able to provide a uniform, albeit very rapid effect on the material. A saw of this model is capable of performing both straight cuts and figured cutting from thick wood. The maximum width of sawn workpieces reaches 30 cm. The engine, which produces a force of up to 0.8 kW, helps to cut even very strong wood species. It must be taken into account, however, that this unit weighs 60 kg.

Band saws can also be of good quality Russian production, such as "Enkor Corvette-35". The device is very powerful, works on high speed. It is recommended for the busiest workshops. The tape moves at a speed of 15 m per second. This speed is enough for sawing workpieces various types, not only wooden, but also made of plastic. Band saw machine "Corvette-35" shipped to customers together with high stands.

The top frame has enough lift to make even difficult cuts easy. The work table is designed in such a way that there is room on it both for the location of workpieces and for the operators’ hands. What is important is that the rotating parts of the saw made in Russia are insulated with steel casings. This significantly increases the level of safety during operation. The tape is supported by a special roller, which avoids tearing or jamming.

Shipping kit "Corveta-35" Includes a protractor to make bevel cuts easier. The ability to vary speeds reduces the load on the motor. The device can be connected to 220 V networks. The cut is made to a depth of up to 20 cm, but it is quite difficult to rearrange the belt.

Subtleties of choice

The most important consideration when choosing the best band saw machines is the impeccable quality of the resulting boards. Any “dips”, “waves” and so on are categorically unacceptable. Based on power, these devices are divided into:

• professional;
• semi-professional;
• homemade.

You shouldn’t buy very powerful units for a home workshop. Yes, they are very productive, but energy consumption will also increase significantly. In addition, high-power devices take up a lot of space and create significant noise. Smaller machines designed for home use are usually quieter. However, they are unlikely to cope with processing durable wood species.

This semi-professional product is recommended for small businesses and utility workshops. Such a tool can work for quite a long time, including when cutting strong material. But if you need to process frozen forest large diameter, only professional devices are suitable. The depth of the cut also plays a big role. It is directly proportional to the engine power. You also need to pay attention to the width of the cut. The width of the processed boards depends on this indicator. Machines installed in large industries can cut workpieces up to 61 cm wide. It is necessary to check the degree of sharpening of the teeth, which affects the evenness of the cut. Saws that allow you to change the operating speed are clearly better than the regular versions.

But we must remember that household tools extremely rarely have such a function. The fee for auxiliary options is not very significant, but they immediately affect the ease of use. The ability to quickly tension the canvas reduces time consumption, also reducing the labor intensity of the work. It is advisable to choose versions with millimeter scales. They increase cutting accuracy, especially if there are 2 or more stops.

It is important to note that you will have to be careful when working with a band saw. Regular Maintenance includes wiring and careful sharpening. These manipulations are quite complex, and in the absence of work experience, it is advisable to use help service centers. Saws with a working belt can be sharpened with special wheels. The selection of sharpening devices is made according to the strength of the tool’s teeth.

But the geometry of the sharpening parts is also determined by the technological parameters of the saw. Before sharpening, you should make sure that the teeth of the tool can cut the surface as evenly as possible. When taking on such work, you cannot make jerks. It is necessary to control the sufficient level of coolant in the grinding mechanism. The accuracy of teeth adjustment depends on this. When sharpening is completed, you need to inspect the band saw. Any burrs, any debris or particles must be removed. It is necessary to sharpen the tool strictly wearing safety glasses and wearing a respirator. It is recommended to give preference grinding machines professional class.

Setting the teeth is no less important than sharpening them. The purpose of such manipulation is to reduce the friction force. Complex species wiring is done only by trained professionals. You should also be sure to adjust the band saw. This procedure is necessary for everyone again assembled machine, and also after changing the canvas. Cleaning the pulleys is a must. It is needed even with stable dust protection. The setting also includes the desired tension of the blades. It is weakened if you plan not to work for 2-3 days.

ABOUT correct sharpening see the following video for band saws on wood.