Kitchen sets are a budget option. Features of do-it-yourself kitchen renovation: from idea to implementation
Budget kitchen secrets
Secret 1: Beauty is in simplicity. Avoid complex shapes and designs!If you dream of a kitchen with unusual shapes, for example, rounded elements, then be prepared to pay a lot for it. Standard rectangular designs will cost you less, but this does not mean that they will be inferior in design and quality.
Secret 2: Ready solutions And budget materials.
Among the huge variety of simple designs, you can choose inexpensive facade panels in a fashionable minimalist style. Standard solutions such as ready-made kitchens“Borovichi” will allow you to save a lot and will last for many years, and a wide selection of colors and milling options will bring the most original ideas to life!
Secret 3: As little as possible glass structures and retractable elements!
By saving on design, it’s easy to fall for another trick with which manufacturers inflate prices. It's about about facade panels with glass and retractable elements. Try to choose options that have as few similar elements as possible. Excellent choice there will be cabinets with solid doors, without stained glass.
Secret 4: Choose your materials carefully.
Extra expenses can be avoided when choosing materials for facades. The quality and design may be practically the same in budget kitchens and more expensive options, and the difference in price amounts to more than tens of thousands of rubles. Often consumers do not know this and mistakenly believe that super-fashionable solid wood doors will be much better in quality and more practical than MDF with plastic.
The most economical buyers can choose film on an MDF board. Such films are available in any colors and textures, but they are short-lived - the film may peel off after some time. Therefore, do not regret adding a little money and choosing a facade made of MDF with plastic. We do not recommend saving on this.
So, what kind of economy-class kitchen furniture should there be that won’t ruin you and won’t make you remember the saying that the miser pays twice?
- Standard sizes only;
- Absence drawers(cabinets with doors are no worse);
- Forget about stained glass and milling;
- Choose standard fittings door handles can be ordinary, without any design frills;
- The shelves can be made of wood, and the tabletop and wall panel can be made of chipboard with plastic;
- Facades are made of MDF with plastic, film or enamel.
Savings and practicality from the best manufacturers
Economy class is best option for those who prefer practical and low cost solutions. Popular offers from the Borovichi Furniture factory are perhaps the most illustrative example. This factory specializes exclusively in inexpensive but high-quality kitchen furniture. Both for lovers of the classics and for those who would like to see a fashionable and bright set in their kitchen, these offers will be the most profitable.Inexpensive, beautiful, durable and high quality - what more could you wish for? That is why many people now give preference. A wide selection of colors and facades will not leave any client indifferent and will allow you to choose a kitchen to suit every taste.
The classic series includes kitchens with MDF/PVC facades and plastic facades. Ruler modern furniture includes such a headset option as “Simple”, which is perfect for techno interiors and high-tech style.
As for other manufacturers, factories do not lag behind the Borovichi level
Kitchen renovation is, frankly speaking, not very cheap. And if it is of a decent size, then the costs will be higher than in the same living room, because the communication networks will have to be changed. But what to do if the budget allocated for this repair is not very large. Of course, you can carry out cosmetic measures, so to speak, to refresh the space. But this will not solve the main problems, that is, the room will become clean, but such repairs will not last long. But even such an inexpensive process will end up being expensive, so we suggest you deal with budget design kitchens, which is based on simplified forms of construction operations.
As is often the case, the original is always simple. Therefore, you should also approach kitchen renovation with imagination, using simple materials and technologies that will reduce costs to a minimum. In addition, if you do all of them yourself, then you can talk about reducing it by one position. So, let's look at the budget option for kitchen renovation, section by section.
Kitchen apron
Let's start with the apron, as a surface that is more often than others exposed to various contaminations. Moreover, it is built above the work surface, which means it is always in sight. Good housewives have a rule - to clean the apron after every meal preparation. If you don’t do this, then literally within a couple of days this surface will become simply unrecognizable. In any case, she will lose her presentable appearance. But the more you rub the apron, using different detergents, the more it wears out. That is, again its appearance loses its originality.
Therefore, when the task arises of renovating a budget kitchen, first of all you need to do something with the apron. In principle, there are many options here. But since the conversation turned to non-standard options finishing, then we will talk about them.
Everyone has probably heard what they threw off. This is tempered glass, finished using photo printing, that is, various designs, patterns and even photographs are applied to its surface. The splashback is made from tempered glass, and when the task is to choose a good, expensive and modern finish for the apron, this is the option they mainly have in mind. That is, this is not a budget option. But you can take it as the basis for your approach to design. kitchen apron.
Glass kitchen apron For this you can use regular thick glass, preferably tempered glass. You don't need to stick anything on it. The design principle itself is important here. For example, old ceramic tiles, which made up the apron itself, can be covered with newspapers or wallpaper. And then attach the glass itself on top. There are a huge number of variations on what to use as a decorative substrate, so there is plenty to choose from. In this case, the glass itself can be attached to self-tapping screws, the caps of which are decorated with plastic caps.
Changing a kitchen set is easiest if you use it correctly various technologies or approach the problem with imagination. The simplest thing is to replace the facades. Today all this is on sale, you can install the hinges and hang the doors yourself. True, not all of the facades you choose may turn out to be cheap, but if you look, you can buy affordable designs in stores.
What else can you offer?
- Just change the handles. It would seem that the set is not the most visible element, but try it, and you will be surprised how your furniture has changed. In addition, you can adjust the design of the handles so that the set itself will differ from the previous one purely stylistically. For example, if you install smooth metal handles on the facades, then the kitchen set itself will be decorated in a minimalist or hi-tech style. Patterned handles, preferably ceramic ones, will turn white furniture into Provence style.
- The easiest way is to repaint the facades. In this regard, the kitchen is a room in which you can experiment. True, painting itself is associated with certain types of work, but you can do it yourself. To do this, you need to remove the facades, walk over them with coarse-grained sandpaper to remove the old finish. You can use a sander - it will be much faster. Then the surface is sanded with fine-grained sandpaper, that is, the surface is brought to a certain evenness and smoothness. After this, they are primed and painted after drying. By the way, you can paint the facades different colors and install them alternately, creating a rainbow effect in the kitchen.
- You can do decoupage on the doors. That is, stick patterns or designs made of fabric or paper on them, and then cover them with colorless varnish. The technology is very simple.
- If there are not cabinets installed on the walls, but open shelves, then back walls can be painted or repainted. The same can be done if wall cabinets glass facades have been installed.
- You can age furniture; this is very popular today. If there are scuffs, cracks and chips on the facades of your kitchen, then the effect can be enhanced.
- Everyone knows that glass in the kitchen gives the space airiness and light. But not all housewives want to display what is in their closets. Therefore, it is optimal to install frosted glass on the facades instead of transparent glass.
- The kitchen will change dramatically if moldings are glued to the doors of the kitchen unit. This is probably the easiest option for changing the design of a room.
These are not all the options for remodeling kitchen furniture that can be used today in terms of a budget approach to resolving the issue of renovating a given room. But they are very simple in terms of the process itself. So take note of them.
Repair of the premises itself
As for budget ceiling repairs. Here again you need to consider whether you can do it yourself. For example, painting the ceiling surface is not difficult. But the concept of repair includes not only finishing. After all, the surface can crack, be heavily soiled, and have chips and other defects. If the ceiling is only dirty, then it can be washed; fortunately, household detergents will help you deal with this quickly and easily.
As for sealing defects, you will have to use putty and a spatula. The most difficult thing is to level the ceiling, everything else is simple. It is important to choose the right paint itself. The kitchen is an active room, so it is necessary to choose a material that is easy to clean. And in this regard, a suitable cheap paint is water-based paint. True, when working with it, you need to know some nuances.
- Firstly, it is diluted with water, and you can use pigment to give it color.
- Secondly, it is applied wet. This is when there is no need to wait for the previous applied layer to dry.
- Thirdly, try to make sure that last layer lay perpendicular to the wall on which the window is located. Water-based paint It is usually applied in two or three layers.
By the way, this budget finishing option can also be used for walls. All repair procedures that were used to repair the ceiling are also carried out on the walls. That is, you need to repair defects, wash the surface, level it and apply paint.
I would like to draw your attention to the fact that today there is a special paint on sale, after which, after drying, you can write on it with chalk. The inscriptions can be easily wiped off with a damp cloth or sponge, leaving the walls clean, after which you can write on them again. By the way, the main color of this paint is black, and the surface itself becomes matte. Therefore, it is not recommended to paint all walls. This way you can decorate one of the walls or part of it, you can paint a couple of kitchen facades or an apron. Again, we return to the fact that it is necessary to show imagination.
And the last thing is gender. What to do with it? Unfortunately, it is better not to skimp on finishing the floor base. That is, budget repairs are not appropriate here. As already mentioned, the kitchen is an active room; people often walk on its floor, especially in the work area, so for finishing you will need a durable, wear-resistant, moisture-resistant and practical material. The perfect solution- ceramic tile. And if it’s already lying on the floor in the kitchen, but somehow doesn’t suit you, then don’t hesitate. Dismantle it, level the floor base and lay new tiles.
Yes, this is a big investment, of course, in comparison. But if you do the floor covering yourself, you can save a lot of money. This is not to say that this process is simple. But you can learn it, especially since your task is budget repairs.
Conclusion on the topic
So, a kitchen with a budget renovation - how possible is it and is it worth thinking about? This is for real possible variant. But is it worth treating this room from this position? Maybe don't skimp on repairs kitchen space. After all, what is a kitchen? This is the room where the whole family often meets. The woman spends most of her time here. Therefore, the kitchen should be beautiful, cozy and comfortable, and always functional. And to achieve this, money is needed.
What is the price new kitchen? Is it possible to calculate in advance how much it will cost to replace the headset and buy new furniture? After all, often inexpensive kitchens, photos of which are presented on the pages of catalogues, become 2 - 2.5 times more expensive by the time of purchase. Why is the price tag growing, and what influences the formation of the final price? In fact, it is possible to equip a budget kitchen, but first you will have to draw up a list of options that you can refuse without sacrificing quality and functionality.
The most expensive purchases - New furniture and technology. Redecorating(laying new flooring and painting walls) will not cost much. It makes sense to make new electrical wiring and replace old pipes, especially if the house is old and the pipes are made of steel or cast iron. You can also change the location of a key kitchen point - the sink.
Inexpensive but stylish: kitchen furniture from IKEA
Furniture: a canvas to create your own design project
Furniture: how the choice of material affects the price
The main component of the price of kitchen furniture is the material used to make the facades. At the same time, externally, furniture facades with a significant difference in price can look absolutely the same. The most budget solutions:
- Laminated chipboard. Inexpensive material, which is obtained by gluing the film onto particle board. The main disadvantage of such facades is bad smell, the source of which is adhesive composition, with which the chips are impregnated during pressing. In addition to a specific odor, slabs with poorly sealed joints can become a source of a more serious problem: evaporation of volatile formaldehyde compounds. Therefore, when choosing furniture with a facade made of chipboard, pay attention to the quality of edge processing.
- MDF in PVC film. Facades made from MDF are 10–20% more expensive than those made from chipboard. But MDF can be used in residential areas without restrictions: the fibers of the internal structure are glued together with natural compounds. The slabs are durable. Film facades are produced in various options design. Advantage - easy care and durability. The disadvantage is the small thickness of the finishing coating.
Film MDF facade: modular system
The most inexpensive materials are used in the manufacture of factory-made sets of standard sizes. Factory-made furniture is always cheaper than a modular set or a custom-made set. In industrial furniture production cutting of parts is carried out simultaneously for hundreds of sets, the amount of waste and trimmings is minimal.
Standard kit 2 m long
Ready-made kitchens are produced in standard sizes. You cannot change the depth, width, or completeness. Additional sections are also not sold separately. A ready-made set is suitable for inexpensive design standard kitchen. The number of color options is limited.
If it is impossible to install factory furniture due to the technical features of the room, modular kits are chosen. Such furniture is practically no different from inexpensive ready-made sets, but it is possible to assemble individual option according to the size of the room.
Modular kit with facade made of film MDF
The choice of shades and textures of modular furniture is more diverse. In addition to standard MDF boards in film, manufacturers offer facades coated with plastic and enamel-painted boards. The cost of a painted facade is 15% more expensive than a film facade. And a plastic covering, which looks the same as PVC film, will cost 30–40% more.
Construction and fittings: what makes a set more expensive
How to save money on furniture? First of all, decide on the size and shape. The most inexpensive kitchen design is a linear layout. If the room size is from 9 m2, you can place two lines of furniture against parallel walls. Savings - on corner cabinets. If the wall length is from 2 to 4 m, then ready-made factory kits are suitable for installation. Standard sizes sets - from 1.6 to 4 m.
Minimum decor and glass: budget furniture
TOP 10 elements that increase the cost of a headset:
- Corner designs. Factory kits with corners are rare; corner parts are more often found in modular systems.
- Corner endings. Attached corner cabinets and install shelves only if there is an unaesthetic empty area near the wall and the cabinet frame is visible.
Modular kit with corner end
- Glass facades. Decorative stained glass, glass, mirror doors cabinets upper tier can increase the cost of furniture by 50%.
- Decorative elements. Cornices, overlays, carvings, panels are elements that do not affect functionality. Modern set with blank facades does not need such decorations, and a classic or retro set must be decorated.
Stained glass windows and cornices: optional decorative elements
- Glass apron. To save on tiles, pay attention to Wall panels. If you choose a slab that matches the countertop, this solution will look elegant and expensive.
- Printing on facades and aprons. Photo printing, mosaic, painting - piece parts in a single copy. The cost of the work is high; the price of an apron made of laminated glass with a three-dimensional pattern or photo can be equal to the cost of furniture.
Expensive photo printing, bows and “exhibition” glasses: tasteless design
- Built-in lighting. It is not necessary to pay extra for factory installation of the backlight. Organize decorative lighting you can do it yourself: using double-sided tape and LED flexible strip.
- Accessories. If it is better not to skimp on the quality of hinges and fasteners, then on drawer closers, sensory elements, shock absorbers - quite.
- Internal filling. Drawers, roll-out drawers, lattices and stands - filling cabinets is expensive. A budget option - shelves in cabinets for dishes and one narrow cabinet with drawers for small accessories.
If necessary, internal parts and organizers can be purchased
- Tabletop. The most economical set is ready-made, with separate top slabs and tabletops made of MDF. The second option, which will cost 10% more, is a solid MDF table top. The surface looks like monolithic stone. Standard thickness– 2.8 and 3.8 cm. An alternative is a tabletop made of artificial stone, but the price of acrylic is 1.5 higher than the price of particle board.
Worktop to match the front: practical
Technical equipment: minimum required
The choice of type of equipment also determines the possibility of purchasing a factory furniture set for an inexpensive kitchen. Separate gas stove with a gas oven - an economical option. Finished sets (lower tier) are measured taking into account the width of standard equipment - 60 cm.
Cooking gas panel and built-in electric oven
If you try, you can find an inexpensive set of built-in equipment. But in this case, you will have to buy furniture element by element; it is better to order a set by size. This choice will help save space in small Khrushchev-era kitchens.
You can find a domino hob with 2-3 burners, and build the oven into a pencil case. This will free up space for work surface, and in the lower tier it will be possible to hide washing machine.
Plumbing and repair work: what you shouldn’t save on
If you decide to save on the countertop by choosing an MDF surface, pay special attention to the edges of the sink. Try to choose a model with wide sides that extend a few centimeters onto the surface of the tabletop. With proper sealing, it will be possible to protect the edges of the cut slab from getting wet.
Deep round sink with wide edge
Avoid skimping on pipes and faucets. Do not buy a silumin faucet - in a kitchen, weak parts crumble, and such faucets cannot be repaired. Buy a simple but reliable mixer from of stainless steel. Pay attention to gaskets and thread material.
Before installing furniture, check the integrity of the pipes. It is advisable to replace the area from the entrance to the kitchen to the connection with the mixer hose with reliable metal-plastic or PVC pipes. Be sure to install a protective grille in the sink drain hole.
If you plan to build in equipment, make sure in advance that the wiring can withstand the load and that the sockets are placed correctly.
Budget and stylish headsets: mission possible
IN small spaces you can install either a ready-made set or order furniture according to individual project. Most organizations that make custom kitchens provide free consultations and do not charge money for a preliminary calculation. If the kitchen has niches, protruding structures, or the area is so small that without corner furniture If you can't get by, choose a custom-made set.
Inexpensive headsets can look chic
Choosing material: the best solutions for a budget kitchen
Pay attention to the furniture package when choosing an inexpensive ready-made kitchen set. Standard solutions:
- Each component of the lower tier is equipped with a tabletop. Usually the most budget slabs with a thickness of 28 mm are installed. The downside is that it is not possible to completely match factory furniture without a gap; joints are visible on the surface.
- The client can choose from a solid monolithic tabletop with a thickness of 28 and 38 mm. If you don't plan to build in furniture, you can save money. A thin slab will cost 20% less.
Don't forget to check the quality internal parts
The frame and internal parts of the furniture are assembled from chipboard covered with the most inexpensive paper film. The frame material cannot be changed. Try to carefully inspect the selected set in the salon: pay attention to the edges. Remove one of the shelves in the closet and assess the condition of the end. If there are no visible shavings between the decorative film and the tape glued to the edge, you can safely order the furniture.
Semi-matte finishing films do not require daily care
Headsets made of MDF coated with film can differ in price several times. The reason is the thickness, performance and aesthetic qualities of the coating. The most expensive are PVC films with an additional transparent “vandal-proof” layer. Budget option - film on paper based imitating a drawing natural wood. The optimal ratio of cost and strength is found in PVC films with a semi-matte and glossy surface.
It is easy to check the quality of the workmanship along the door line of the bottom edge of the cabinets
Be sure to check how accurately the parts are cut. Don’t listen to managers’ excuses that the hinge fastenings are not tightened on purpose. It is impossible to correct cutting defects. Order a set whose parts fit perfectly.
Ready-made kits from 1.6 m long trading platforms They offer prices starting from 10 thousand rubles. If you want bright furniture with a cheerful pattern on the facades of the upper tier, prepare about 15,000 rubles, which is how much a set with straight facades in a glossy film 2.1 m long costs.
Bright set with standard “strawberry” print
All ready-made economy class headsets are in the same price category. The price increases only with an increase in size and the addition of glass in the doors of the upper tier.
Plain set with matte fronts
Kit with extension up to 4 m: plastic facade
Flaw ready-made kits – little choice shades of facades. A significant disadvantage is that for all design options for hanging elements they offer only one option color scheme frame part. Naturally, the side parts of the furniture will be very different, and even contrast with the color of the facade. Be sure to consider shade compatibility when choosing a kitchen color.
You can only choose the color of the facade film, but the color of the body does not change
We assemble a set from modular collections: more individuality
Chic set of white gloss and printed facades
Modular systems give more opportunities in choosing colors, textures, sizes. The new collections have at least 2 options for the depth of the lower tier cabinets. In addition to standard elements, you can choose:
Set: three cabinets in the lower tier and two hanging elements on top
- Closed pencil cases.
- Open cabinets with shelving.
- Additions in the form of bar counters, corner, radius cabinets.
- Cabinets for building in equipment.
The number of color combinations from which you can choose varies from 6 to 10. Number of colors frame parts– from 2.
Modular headsets: equipment for any room
In addition to standard-width elements, the collections include non-standard cabinets with a width of 10 cm or more.
Modular kits are ideal for low-cost design corner kitchens. A correctly assembled set will look like expensive custom-made furniture.
Convenience of element-by-element configuration - in the absence unnecessary details. You can arrange the corner lower tier, and install the hanging elements of the upper tier only on one wall.
Corner set with refrigerator cabinet
To order: laconic sets for non-standard premises
It is most difficult for owners of non-standard, narrow, small kitchens to save on furniture. It’s impossible to squeeze even the smallest set into a tiny kitchen. The solution is to order a kitchen for custom size.
Small kitchens: a difficult task for the designer
Due to high blind cabinets, you can significantly increase the internal usable area by hiding everything kitchen utensils.
Linear set with complex geometry
Bright colors and gloss in combination with straight facades will make even a micro-kitchen elegant.
Even the window sill is involved: inexpensive kitchen for a small area
In low rooms you can donate upper cabinets, replacing bulky structures light open shelves.
Budget project for a kitchen with low ceiling
Dining room design and budget kitchen decor
The furniture has been chosen, all that remains is to add comfort. Lunch group – small table for family gatherings, and several decorative details, which will emphasize the overall style of the kitchen.
A few touches and stylish decor: the secret designer kitchen
Dining group: kitchen corners and sets
If the furniture is in corner layout, then as a lunch group you can choose:
- Soft corner sofa with a table.
- Round, oval or rectangular table set.
Small table to match the furniture and chairs with contrasting upholstery
When ordering furniture, consider making it custom and dining area. For example, order a table-stand made of a material that follows the pattern of the tabletop.
Peninsula table and decorative “lace panel”
White table of strict rectangular shape, simple chairs– an excellent addition to laconic furniture from IKEA. As a finishing touch – unusual gold pendant lamps.
Set of elements with a dining group
In contrast to the glossy black and white furniture - an airy transparent glass table and weightless metal chairs with fabric seat upholstery.
Simple and stylish: a cozy dining group
Corner sofa in pastel textiles and plastic round table: suitable for any kitchen.
Minimum area: solution for small spaces
Lighting and decor: DIY design
There are many options to make your kitchen extraordinary and cozy. The fewer shades are combined in furniture facades The simpler the textures and design of the walls, the more space there is for decoration.
Free decor: foam cushions for stools
For example, a contrasting shelf ladder: a useful accessory. Be sure to make low sides so that the steps turn into real shelves.
Stylish shelving: old staircase
Decorative panel with bright patterns looks great in a white small kitchen.
Instead of cabinets - an interesting design
Saved on furniture? Excellent, a classic chandelier with crystal pendants will become the center of the original and stylish kitchen. And the picture-clock will not allow you to doubt that the project was developed by a professional designer.
Modest furniture and immodest chic decor
Decorate your walls with colorful sets of printed paintings or photographs. A feature is a series of three elements of one photograph.
Use wall decals. Vinyl decor is easy to stick on, and pictures can be removed without leaving a mark on the wall.
Remember, the style of the kitchen is not determined by the amount of money spent on furniture, appliances and renovations. Competent stylistic layout, selection of the “right” shades and a sense of proportion are the main assistants of a novice designer. Do you have doubts about choosing furniture, is it difficult to calculate the number of necessary elements? Call a specialist. Preliminary calculation is free. Don't skimp on assembly: let a professional assemble your kitchen. If found to be defective, suppliers will replace damaged parts under warranty.
Renovating a small or spacious kitchen proper preparation you can do it yourself. A variety of materials allows you to perform budget finishing.
There is one special room in a house or apartment that is cozy and warm and smells delicious of freshly prepared food - this is the kitchen. This is where household members love to spend time with their family, have get-togethers with friends, and prepare culinary masterpieces. Therefore, when planning a kitchen renovation with your own hands, you need to create special atmosphere, supporting these family values.
We take into account the nuances
The kitchen is a room that is subject to increased operational and sanitary requirements. When planning repair work All its features should be taken into account:
- high temperature and high humidity arising during cooking - it is necessary to provide powerful ventilation;
- Availability gas equipment, large quantity electrical appliances - it is important to follow fire safety rules, lay reliable wiring, install powerful sockets;
- aggressive environment - when cooking, fat settles on walls and furniture, so they need a washable coating;
- high degree of serviceability - all coatings must be wear-resistant;
- small area - in a small kitchen in the house old building You will need rational organization and visual expansion of space.
Planning is the key to successful renovation
In order for a kitchen renovation to be quick and effective, it is necessary to adhere to a certain sequence of renovation work.
Drawing up a design project will allow you to select the optimal design of the room, determine and calculate required amount construction and finishing materials.
Depending on the state of the kitchen, you can do cosmetic (superficial) or major renovation(with replacement of communications, redevelopment). Development of a room design, including selection stylistic direction, color range, finishing materials, arrangement of furniture, household and lighting fixtures can be assigned professional designer, or do everything yourself.
Rough and preparatory work
Before starting repairs, it is necessary to empty the room of equipment and furniture, and clean the walls, floor and ceiling of old, worn-out coverings.
Replacement of plumbing equipment
It is better to replace old pipes in the kitchen before starting renovations. The most budget option is a polypropylene pipeline, the elements of which are attached by welding. It is not afraid of corrosion and does not require the installation of cuffs or gaskets. Metal-plastic pipes are more durable, but they are more difficult to install. The most durable and reliable is a copper pipeline. It resists loads and deformations well, has an antibacterial effect, but is expensive.
Wiring
When replacing power lines, it is necessary to take into account the saturation of the kitchen household appliances- this will allow you to choose the optimal one. You should also recharge the main and additional lighting fixtures.
Window replacement
For kitchen area A plastic product would be optimal. The material resists temperature fluctuations, provides high-quality noise and heat insulation, and is easy to clean. Wooden windows with double-glazed windows they look beautiful, are environmentally friendly, “breathable”, but are more expensive than their plastic counterparts.
Arrangement of the doorway
The entrance area of the kitchen can be decorated with a door (plastic, wooden, MDF). It's better in a small area. This architectural element can be made of plasterboard or wood - the main thing is that the option for arranging the doorway to the kitchen should fit harmoniously into the interior of the room.
Surface preparation
Do-it-yourself kitchen renovation involves leveling the walls in one of the following ways:
- by plastering - a traditional way to obtain a smooth, monolithic surface by applying several layers of cement-sand mixture. Its disadvantages are labor-intensive implementation, high consumption building materials, the inability to level out large uneven walls;
- using sheathing plasterboard sheets― a quick and easy way to create smooth surfaces by creating false walls on metal frame. This method is not suitable for a small room, since it takes up part of its area.
An option for leveling the kitchen walls is shown in the photo.
Apron design
In the kitchen, it performs a practical function, protecting the wall from steam and dirt, and is also decorative element rooms, filling the space between the upper and lower compartments of the headset. If you choose a budget finish and design of the apron, then cladding with plastic or MDF panels will do. The slabs are quickly installed, easy to maintain, and their joints are protected with special overlays, which prevents the ingress of moisture and dirt.
A more reliable, hygienic and durable option is finishing the apron with tiles. Tiles come in different colors and textures, which allows you to implement different design. Although tiles are more expensive and labor-intensive to install, such a coating will last for ten years. The method of finishing a kitchen apron with tiles is shown in the photo.
Exclusive ways to decorate the wall near the work area - facing with stone, mosaic, glass or mirror panels. Glossy surfaces will not only allow you to create a non-trivial design, but will also visually expand the space of a small kitchen.
Wall repair
The easiest way to decorate these surfaces is painting. It can be plain, gradient, contrasting - it all depends on the desired effect. In a small kitchen, it is better to use light washable paint with a glossy sheen, which visually adds volume to the room. In large rooms it is advisable to use semi-matte/matte finishes. Decorative painting will make painted walls more original. vinyl stickers. The variety of materials allows you to implement the most interesting ideas painting the kitchen.
A budget option for decorating the walls of a food preparation room is wallpapering. Thanks to the variety of colors and textures, they allow you to create different designs. In the kitchen, it is preferable to glue vinyl or non-woven wallpaper - they do not absorb grease, dirt, moisture, do not fade in the sun, are easy to clean and allow the walls to “breathe”.
The traditional way to decorate the walls of a food preparation room is cladding ceramic tiles. It has different designs, sizes, long service life.
The tiles are quite labor-intensive to install, but they allow you to create a durable coating that is resistant to dirt, moisture, and impacts.
A more interesting, but expensive way to finish the vertical surfaces of a food preparation room is to use decorative plaster. “Marmurin”, “Travertine”, “Ottocento” and other mixtures have different structures and allow you to form interesting textured surfaces. The photo illustrates how to use decorative plaster to turn an ordinary small kitchen into a work of art.
Ceiling finishing
Materials for ceiling decoration should be easy to maintain and have increased resistance to aggressive environments. It can be:
- polystyrene foam boards are the most budget option. They are easy to install and moisture resistant. The disadvantage of this coating is its unsafety and simple design;
- paint is inexpensive and quick way ceiling finishing. It is applied to a previously leveled and primed surface, dries quickly and is washable. This coating will have to be updated periodically;
- plasterboard - the material allows you to quickly level surfaces, hide wiring and communications, is hygienic and fire-resistant, and provides additional sound insulation of the room. GCR also allows you to implement different ceiling designs - to form a multi-level suspended or tension structure.
Please note that in a small kitchen it is better not to use massive structures; they take up part of the space. The photos below will demonstrate various options finishing the ceiling of the cooking room.
Flooring
Finish flooring Placed on a flat, clean surface. The following can be used to decorate the flooring:
- linoleum is the most budget option. The coating is moisture-resistant, highly wear-resistant, easy to install and easy to maintain;
- tiles are the most optimal flooring option for a kitchen floor (practical, durable, have different designs, allow you to lay a warm floor);
- laminate - beautiful coating wood effect, easy to install. For the kitchen, it is better to choose moisture-resistant slats with increased wear resistance;
- cork is an environmentally friendly, pleasant and warm-to-touch flooring that is not afraid of dirt, moisture, or mold. But this coating cannot withstand mechanical cleaning and the use of aggressive household chemicals.
Renovating a kitchen from scratch is not a cheap pleasure. What to do if you want change, but your budget is limited? Use your imagination and take a non-standard approach!
And then from old furniture and dilapidated finishing materials, you can put together a “candy”, and with minimal monetary costs.
How? See the selection below budget ideas for a kitchen remodel.
Glass apron
The space between cabinets and cabinets in the kitchen suffers the most. He gets splashes of water from the sink, drops of grease and soot from the stove, and other traces of cooking. Even the most durable tiles will lose their original luster over time in such conditions. What can we say about paint or plastic panels!
To update the surface of the apron, it is not at all necessary to start repairs, knock down tiles or stir up dirt. You can coat the surface with threw off .
These are panels of durable glass overlaid on top of a printed image. The pleasure is not cheap, let's face it. But you can take note of the idea itself! Many people simply use tempered glass, and then glue wallpaper under it, paint the walls, or even use collages from photos/drawings/newspapers - it turns out very unusual.
The background
Many in kitchen sets There are cabinets with glass doors. You can update such furniture and paint its back walls in saturated color– blue, dark red, emerald. Against such a background, even the simplest white dishes will look much more sophisticated and such cabinets will decorate the kitchen. And you can support the chosen shade with other decorative elements - vases, a tablecloth or pots on the window.
We paint facades
A budget option for updating a kitchen is to replace or update its facades. Whatever you plan to do with the panels, they must first be removed from their hinges, washed, sanded and coated with a primer. And then create what your imagination tells you - paint, paint with patterns, create the effect of antiquity, etc. Good option– choose a dark color for the bottom and a light color for the top. This will make the kitchen more interesting and refresh the interior.
Changing handles
Sometimes just changing the handles on the furniture is enough to give it a completely different look. If the furniture in the kitchen has smooth facades, then you can add a touch of minimalism or hi-tech to it by installing smooth metal handles of a laconic shape.
And patterned or with ceramic inserts handles on light furniture will allow you to create an interior in Provence style!
Aged effect
Painted kitchen facades quickly lose their uniformity of color. Don’t be discouraged, it’s better to enhance this effect and rub the corners and bulges on the panels to give them a vintage touch. Many designers specifically use this technique on freshly painted surfaces.
Frosted glass
Glass doors on cabinets add airiness and light to the space, but you don’t always want to display the contents of the shelves for review, and it’s also not always possible to maintain order. In this case, you can replace the standard doors with frosted glass– it will help hide the contents of the cabinets and at the same time visually brighten the kitchen.
Moldings
Another simple one effective way to transform the panels of kitchen furniture - these are moldings. With their help, even a simple wardrobe can be turned into stylish element interior You can attach moldings of a contrasting color to the furniture or use matching products. You can glue the overlays and, together with them, repaint the panels in a new color.
Heavy metal
Metallic, which is fashionable nowadays, can also be used in kitchen design. Cover the doors of cabinets and bedside tables with metallic paint and you will get creative interior in loft style. Not all surfaces can be metalized, but some doors can be partially highlighted.
Rainbow
If you plan to repaint the kitchen, you can choose several shades that harmonize with each other and paint each drawer or door in its own color. In this case, you can use the remains of different paints.
If the shades are chosen well, the interior will turn out bright, non-standard, but not flashy.
Tile inserts
You can use tiles to remake furniture panels. Small squares of tiles in the form of panels on the doors look unusual and at the same time are easy to care for. Choose small-sized tiles of a similar color scheme to the shade of the furniture.
Write notes
And now on sale you can find a special matte black paint, which, after drying, turns into a surface on which you can write with chalk. You can paint one cabinet or a piece of wall with this paint and use it as an interior accent and a writing board. The bravest ones paint refrigerators with this paint.
What options for creative kitchen remodels for little money do you know?
New kitchen for pennies: 10 budget remodeling options kitchen interior updated: April 20, 2019 by: Irina Yeryomina