Non-standard interior doors. Sliding doors Order interior swing doors of non-standard size

home

Kinds

Interior doors can be the most unusual! But the main trend of our time is sliding ones. How to make your interior design stylish, original, special with the help of this element - look at our photos.

Advantages and disadvantages of using sliding doors

A system of doors in which the leaf (that is, the main part) opens along the wall is called sliding.

The sliding door system was borrowed by the designers from the Japanese. This is not surprising, because in Japan, where the territory is incredibly small and the population density is high, everyone square meter- worth its weight in gold.

Despite their originality and unusualness, sliding doors have become a part of our everyday life. There are a number of good reasons for this, which are the key advantages of using sliding doors:

Unlike swing doors, which take up at least one square meter of usable space, sliding doors do not require additional space. Thanks to this, even the tiniest apartment will become as comfortable and spacious as possible.
The number of panels in a sliding door system can vary from one to several, which can not only become an unusual element of interior design, but also an excellent option in terms of functionality, because it is much easier to control and adjust the width of the doorway with such a door system than with swing doors.
Sliding doors can serve not only as doors, but also as a multifunctional partition between rooms or zones. Sliding interior partitions are very relevant for owners of one-room apartments, where, on the one hand, you do not want to reduce and divide the area of the room, and on the other, one way or another, there is a need for each family member to have personal space. At least for a while.

However, like every medal, sliding door systems have some disadvantages:

Sliding doors save space near the doorway itself (forward or backward), but it is critical to have space on the sides of the doors so that the doors have room to move. This space is called "parking". Without a place to “park” the door leaf (for example, at the end of a corridor), sliding system It will simply be impossible to install. Even if parking spaces are hidden in the wall, it is not recommended to install such structures in load-bearing walls and adjacent walls.
Sliding doors move on rails and rollers, making them almost impossible to open without the accompanying sounds and noise. Therefore, it is better not to install such doors in the bedrooms of sensitive sleepers and, especially, in children's rooms.
Prices for sliding door systems are an order of magnitude higher than for standard swing structures due to the cost of the sliding mechanism (especially if it is of high quality).

Types of designs of sliding door systems

Standard

Standard sliding doors are a structure that is installed in the doorway. The door leaf does not swing open, but moves to the side and is fixed near one of the walls.

Standard sliding doors come in two main types:

Single-leaf (with one movable leaf)
Double-leaf (with two movable leaves)

The first option will be convenient for small rooms with tiny doorways.

If you need to install a door between two small rooms or a room where every square meter is important, then single-leaf sliding door systems will be the ideal option for you.

The second option is more suitable for spacious spaces with wide doorways. Thanks to this design, you will be able to independently adjust the size of your doorway (which is very important not only from the point of view of functionality, but also the visual perception of the room as a whole).

Radial

The radius design of sliding door systems assumes that the door leaf moves not in a straight line, but in a circle. This option will fit perfectly into a non-standard room layout that has round or curved walls.

Radius designs are good to use as stylish sliding partitions for zoning space in a room. This will look especially appropriate when creating an interior in high-tech, minimalism, and fusion styles.

Harmonic

Accordions (or as they are also called - folding interior doors) are a structure of several relatively narrow canvases that do not move away, but fold (see photo below). The beauty of this design lies in the fact that the width of the doorway when using it varies from a narrow crack (for example, so that a cat can sneak through) to a full-fledged spacious passage.

Coupe

Sliding sliding doors differ from standard ones in that the design occupies not only the doorway, but replaces the entire wall. On the one hand, depending on the materials used, this allows you to divide the room into two independent functional zones without strongly visually concealing the space, and on the other hand, you can create two or more cozy personal spaces for each family member in a studio apartment or one-room home.

Branch in a studio apartment using sliding doors will prevent the spread of odors and steam from the cooking zone throughout the room.

Materials for sliding doors

The most popular materials for the manufacture of sliding door systems today are:

Tree
Fiberboard or MDF
Glass

Tree

The traditional material for the manufacture of not only doors, but also furniture in general, is wood. At the same time, both the entire panel (s) of the sliding door system and the frame for combination with other materials can be made from wood:

Glass
Plastic
Paper
Textile
Mirror

The easy flexibility of wood to process allows it to be used for interior decoration in almost any style. Want a charming country room? Use unplaned wooden boards! Do you like the interior in classic style? Choose wooden door leaf strict forms. Are you striving to create an interior in a shabby chic or art deco style? Give preference carved wood with forged elements or inlay. Are you a supporter of the East? Use canvases with wooden frame and rice paper inserts.

Fiberboard/MDF

Since wood is not the cheapest material, it can easily be replaced by materials such as fiberboard or MDF. In appearance they are almost impossible to distinguish from natural wood, but the cost is an order of magnitude lower than that of similar products made from natural wood.

Glass

Glass sliding doors are an excellent option for creating an interior in minimalist, futuristic or hi-tech styles. Due to the property of glass to transmit light, glass interior sliding doors do not create a feeling of total enclosure of space. Moreover, by choosing the degree of color and opacity of the glass for the door leaf, you can select the degree of transparency (and, as a result, integration with the neighboring room) of the interior doors.

Sliding interior partitions

The versatility of sliding door systems allows them to be used not only as doors in doorways, but also as an element of space zoning. The most common option for using zoning in the interior is zoning studio apartments and one-room apartments. IN in this case This is more of an obvious necessity than design solution. However, sliding partitions can be used in other cases:

If children of different sexes live in one or fly of different ages, then with the help of a sliding partition you can turn one large children’s bedroom into two smaller ones.
If you want to organize in your apartment or house, and special room is not provided for this, then with the help of a sliding partition you can separate part of the bedroom for these purposes.
A large kitchen can be more than just functional work area for preparing meals, but also a full-fledged dining room. The use of sliding partitions will prevent the spread of odors throughout the kitchen from the cooking area, and will also hide “production costs” in the form of dirty dishes, garbage, and other things from prying eyes.
It would be appropriate to use sliding partitions not only in residential premises, but also in offices to divide working space different employees or the manager’s office and, for example, a meeting room.

Thanks to wide range products from manufacturers of building (and not only) materials, almost all stages of repair and future interior elements can be created and installed with your own hands. And the online store will help with this Leroy Merlin, where you can familiarize yourself not only with the available range of materials, but also with their main characteristics.

First of all, decide what type of installation you will use. There are two types:

Overhead. In this case, the guides and rollers are installed on the wall, outside the doorway. This option is easier to install, but remember that in this case the door leaves will always be visible.

Built-in. In this case, the sliding mechanism is mounted inside the doorway, and the leaf slides into niches in the walls. This option is more compact, however, a beginner will most likely not be able to handle it.

Having decided on the type of installation, you can think about the type of sliding structure door system and the material from which it will be made. As mentioned above, the main types of sliding door designs include standard, radius, cascade (accordion) and compartment.

After appearance the future door will be thought out and selected, it is necessary to measure the height and width of the installed structure and make markings for the applied mechanism.

Markings should only be applied using a water level, otherwise your doors may be warped!

Some designs involve installing a guide not only from above, but from below. In this case, the door leaf will completely occupy the space from floor to ceiling and the door’s ability to isolate noise and extraneous sounds will significantly increase.

After the guides are securely fastened, rollers are installed in them. For each blade, depending on its width, you will need from one to three rollers. The edges of the guides are blocked with a bracket (so that the rollers do not fly out).

The next stage is screwing the door leaves to the rollers and installing door hardware. All! The door is ready for use.

We provide a unique opportunity - any size of the door leaf in increments of 1 cm. This guarantees confidence that the doors of our factory will fit any doorway. The only limitation is the maximum possible dimensions of the canvases: 240x100cm.

Keep in mind that when changing sizes, the proportions of panels and pillar elements may change. For example, if the height of the Gloria model increases, the internal grille will remain the same size, but with a width of 60 cm, the Vienna model can only have one row of small panels.

But even in this case, there is a way out - you can supplement the height of the opening with a transom in the same style as the door model. With wide doorway can be installed swing door of two halves. But even in this case, there is a way out - you can supplement the height of the opening with a transom in the same style as the door model. If the doorway is wide, you can install a swing door made of two halves.
We approach each order individually. Our managers will definitely advise and suggest the best option in this or that non-standard case.

Interior doors of non-standard size from the Onyx company

The company has been operating on the market since 1997. We use only proven materials and produce products using modern equipment from Germany. At the end of the day, all products meet international requirements.

Working with the Onyx company, the customer receives:

reliable products;
convenient production times;
durable material;
acceptable prices.

Onyx products are distinguished by their level of noise insulation and durability. The doors are being moved mechanical damage and are durable. We have an individual approach to each client.

Order non-standard interior doors in St. Petersburg and Moscow

You can order doors of any non-standard sizes in showrooms. Contact information is on the Where to buy? page.

Many of the consumers planning repairs or construction works, ask the question: “Is it possible to buy inexpensive interior sliding doors in Moscow?” Of course you can if you contact the Casseton company! Especially for those who have limited funds and want to purchase high-quality sliding doors inexpensively, we have developed the “Standard Profikit” system! It can be safely called the most affordable design in the price range, which can delight you with all the advantages of a high-quality sliding door!

Peculiarities

Buying “Standard Profikit” inexpensively means getting reliable design, consisting of one canvas and one cassette. The latter represents metal structure, integrated into a plasterboard wall. When opened, the canvas smoothly moves into the cassette. Cheap sliding interior doors are presented only in standard sizes. Their width varies from 60 to 80 cm in increments of 10 cm, and their height can be 200 cm or 210 cm.

Installation

As already mentioned, “Standard Profikit” requires the cassette to be built into the wall - therefore installation is carried out during its construction. The minimum thickness of the wall structure should start from 125 mm. When buying sliding interior doors inexpensively, do not skimp on their installation! Entrust it to the professionals of the Casseton company! They have successfully installed hundreds of doors and have mastered the installation technology to perfection.

We work with the conclusion of a formal contract and provision of a guarantee. By contacting us for installation, you can be sure that the door will function without breakdowns and will delight you with its durability.

Advantages

The Standard Profikit system has a non-threshold mechanism, which, of course, is its advantage. The guide rail located on top eliminates damage flooring. Other advantages of the system are as follows:

saving free space;
possibility of using the space in front of the door;
simple room zoning;
excellent aesthetic characteristics;
wide selection of canvases;
long service life.

"Casseton": affordable solutions for any interior!

It is believed that sliding doors are a novelty among door designs. But this is not true. Many centuries ago, sliding doors were first invented in Japan, which were used as interior partitions in large rooms. That is, this is a very ancient, but still relevant invention. Sliding doors are a very convenient and practical design that is very popular. Manufacturers now offer a wide selection of such products, so it is important to know how to choose the most suitable option for you.

Design Features

Sliding doors can have two types of design depending on their design:

parallel-sliding;
sliding folding.

They are completely different in their mode of movement and mechanism. In addition, they are installed completely differently.

Thus, parallel sliding models consist of several small sashes. They move on rails and rollers. These are very reliable structures that can last a very long time.

Sliding folding systems have a different design. They always consist of large quantity sections and fold like an accordion. They have a different operating principle and are completely assembled against one wall during opening. They are great for distinguishing between different functional zones and for room decoration.

Also, all designs include certain components that are an integral element of such a door system.

So, there are profile guides. Its average length is 1.5-2 m. There is also always a lower guide profile and a set of fasteners.
For models that move on casters, wheels are provided. Usually there are quite a lot of them, but the specific number will depend on the length of the door.
Very important element designs sliding doors are stoppers. They are necessary in order to limit movement during the movement of the valves. This way you can conveniently fix the doors in the desired position.

The design also includes leaves or door panels, which are the main part of sliding doors. The design has a suspension, cassette, runners, platbands, extensions, and clamps. No door functions without these elements. Most sliding doors have a special strip.

It is necessary in order to hide all mobile mechanism, or rather, videos. It also covers the profile guides and makes the appearance of the door more presentable. Such strips are called decorating.

Types of mechanisms

The sliding partition system consists of several doors. Most often they are made from an aluminum profile that acts as a frame, and other material for the door leaf. In this case, additionally use glass, plastic or other lightweight material. The interior partition has a certain mechanism. Such doorway can be moved to the right or left.

The peculiarity of the mechanism of room partitions is that it is very functional and at the same time the doors move completely silently. This mechanism is suitable for installation in any room.

Parallel sliding partitions have several doors, but can be presented in the form of one wide sliding panel. The choice of model will depend on your personal preferences. Single-leaf partitions move parallel to the wall or hide inside the wall space. Wall-mounted models are considered the most compact.

Multi-leaf parallel structures have a more complex structure. When opened, they are also located parallel to the wall, but, as a rule, they are presented in the form of three or four door leaves. But all these canvases can move independently of each other, separately.

Folding sliding partitions consist of several panels of equal width. Moreover, designs usually include more than three canvases. In some cases, their number can even reach ten. When you open the door, all the leaves fold on one side of the opening, lying flush against each other. In this position they can be conveniently fixed.

Manufacturers also present suspended, built-in, hinged, roll-out, drive-in, in-opening, overhead sliding structures.

"Harmonic"

Folding folding doors are very stylish and functional. They are perfect for those who have cramped and small apartments. They are very compact and take up very little space and move along rails on special rollers.

Door panels are called lamellas. They are gathered from the side and folded like blinds. Moreover, these can be not only soft models, but also more dense and reliable wood and aluminum. Accordion doors can be presented in the form of “books”. These are slightly different designs with larger door leaves. They are somewhat reminiscent of screens.

Usually books have 2 or larger canvases.

“Accordions” allow you to highlight several different functional areas in a room. Moreover, they can be installed in rooms decorated in modern styles - Hi-Tech, minimalism, and more classic on room decoration. So, there are models for the kitchen, bedroom, and nursery. They are also used to equip the entrance to the office, and in this case glass models are often preferred.

"Accordions" are one of the most inexpensive among all sliding doors. Their cost will vary depending on the design, material of manufacture, as well as their size. They are usually used for wider doorways, since these structures themselves are quite long.

Coupe

Sliding sliding doors are gaining popularity every year. They look more strict and composed compared to accordion doors. They are installed both in the office and at home. Sliding doors also take up very little space, so they are perfect for installation at the entrance to a hallway or a small kitchen.

Sliding doors have better sound insulation compared to accordion doors. That is why they are often installed in the office. This way, extraneous sounds will not distract you while working. They are a great space saver in any room. They can be easily installed with your own hands. The door leaf may be hidden in the wall after you open the door.

There are also models that are applied to the wall surface like a panel. This option looks very fashionable and unusual. These designs have two possible uses. So, they can completely replace any swing doors.

In addition, some use sliding doors as wall panels.Their installation does not require installation door frame and thresholds. Therefore, the process will take very little time and effort. It will also be much easier for you to choose the right flooring.

Sliding doors belong to the middle price category. Their cost varies depending on the design and construction features. The average cost is 8,000-10,000 rubles.

Pencil case

They got their name due to the fact that they look very similar to an ordinary school pencil case. They are very compact, so they also save space in the room. Manufacturers offer a huge number of models of different designs and configurations, so they can be selected for any type of room and doorway.

They are very dense and do not allow noise or extraneous sounds to pass through at all, so they can also be installed in office spaces. This is due to the peculiarity of their fastening method, which distinguishes them from other similar sliding models. They also move slightly differently along the wall.

As a rule, sliding pencil cases have glass inserts and unusual patterns and interesting design, so they are in high demand. They move completely silently and therefore do not distract people in the room. The design feature is the mandatory presence of a closer, which also ensures smooth movements. They are the most compact among all sliding models.

Portal

Portal structures are most often made of plastic. This is a very stylish and unusual design solution. It allows you to play with the light in the room and skillfully save space by visually expanding it. It's quite original and unusual solutions, which can diversify any interior. Most often they are used to fill doorways of great height and wide size.

Door leaves suspended on hinges. The frame inside has slats along which the panels move. When you open the door, the hinges unfold and the door slides into the room. The hinges, together with the sash, move along the slats along the wall.

Such doors can be fixed in any position, which is an undoubted advantage of this design. When you close such a door, the hinges fold and the door leaf returns to its original place.

Types of canvases

All door leaves vary depending on the number of leaves. The dimensions of the door leaf also play a big role. The most common and classic are single-leaf sliding models. As a rule, they are purchased for narrow spaces. These are quite compact models that move to the side and take up very little space in any room.

To install single-leaf sliding panels, there is no need to install a door frame. But for this you need to make a high-quality doorway. Single leaf panels are attached to the bottom of the doorway. There are also models with a top rail.

Another common option is double-leaf interior doors. They fit quite large in width doorways. These are very stylish and functional designs that perform perfectly decorative functions. As a rule, double-leaf models are installed in large rooms.

They consist of two identical canvases. You can fix one panel and use the other, or simultaneously move both panels apart when entering and leaving the room.

There are even three-leaf models, which are often installed as interior partition. They can also be presented in the form of a screen. They look more massive than double models.

The greater the number of panels in a sliding door, the smaller size door leaf. But there are also quite large models with a wide door leaf. These include radius structures, in which the blades are arranged in a circle and move on rails. These can be either accordion models or regular sliding folding doors. Semicircular and telescopic canvases, as well as cascading models with a lattice, are also popular.

Doors that are installed at the entrance to the room have different size. The average door leaf is 1 m wide, wider ones input structures can be up to 2 m in size. Standard height is also an indicator of 2 m. But in case you have taller or more low ceilings, as well as wider or narrower doorways, you can make a custom sliding door based on certain parameters.

Manufacturing materials

Sliding doors are made from a wide variety of materials:

Such models may have wooden frames or be made entirely of wood. Products from door array They are very reliable and quite large. This material is also reflected in their price.
Models made from fiberboard and chipboard are considered cheaper. Such doors include wood and other synthetic connecting components. They are also completely environmentally friendly, but are lighter in weight compared to wooden ones. This design moves easier and quieter along the guides.
Veneer products are also very popular. Externally, they completely replicate solid wood models. Inside they have a different, lighter unnatural filling.
Plywood models are quite lightweight and durable. They are very often installed in doorways at the entrance to a room. MDF models last quite a long time.

The most unreliable are sliding doors made of plasterboard. They are light in weight but very short-lived. Most often they serve as decorative partitions or screens.
Are reliable aluminum structures that have glass or mirror inserts. As a rule, the role of the basis in them is played by aluminum profile. They reliably hold such a seemingly fragile structure.
Glass doors look very luxurious and elegant. They fill the room with lightness and light. To create such structures it is used tempered glass. They are quite heavy and large, but very difficult to break. This is due to their thickness and quality of such products.

Glass doors can also have a wooden door frame. These are the models that are the most reliable. They are capable of creating excellent sound insulation. Sliding doors are also made of polycarbonate.

Iron sliding doors are considered quite reliable and massive. They are most often installed at the entrance to the room. Sliding door components are also very often made of iron.
On wooden models can be installed wooden handles. All furniture fittings in this case must be of high quality. It must be securely fastened to the door structure.

Functions

Interior sliding doors should not only perform the function of restricting entry into the room, but also solve many other problems. Thus, models with sound insulation are very popular. They allow you to close yourself in a room and get rid of extraneous sounds. Such structures are often installed in office rooms or work rooms, since extraneous sounds in this case may interfere with work.

In this plan good option are sealed doors. They not only create sound insulation, but also do not allow odors to pass through at all. Such structures are often installed in the kitchen in order to prevent the upholstery from becoming soaked. upholstered furniture odors that may come from the kitchen.

Insulated doors do not let air out of the room. They are often installed in bathrooms and toilets. They are perfect for bathing and other water procedures and perfectly retain heat inside the room.

In addition to installation at the entrance to the room, sliding models are also used for zoning space. These can be sliding partitions or radius structures. This function is very important for owners of studio apartments. Sliding partitions allow you to divide the room into several functional zones and limit them from each other.

Advantages and disadvantages

Sliding doors are quite controversial designs, since they have both disadvantages and advantages:

The main advantage is their versatility. They can be installed in absolutely any room, regardless of its purpose. They can be installed not only at home, but also on the street and even in shopping centers.
The big advantage is availability of function automatic opening and closing doors. This innovative technology, which makes life easier. Such doors, as is known, have a design that slides sideways. That is why they do not react in any way to drafts or gusts of wind. They will not slam shut on themselves and will not move in any way. There is also a convenient lock for this purpose, which allows you to secure the door in a convenient position.
Another advantage is no noise when closing and opening the door, which cannot be said about flapping swing models. They are also lightweight, so they move easily on rails. Even a door like this can handle Small child. The big advantage is that such doors can save space. You will not need to provide space for plowing when you make repairs.

Some swing structures furniture fittings they spoil the adjacent walls, but with sliding models there are no such problems.

These doors are completely safe and very convenient. This way, during the opening, you won't hit anyone by unexpectedly entering the room. This way you will protect your children and pets, because the sash does not open backhand, but to the side.

But despite all the above advantages, the design also has a number of disadvantages:

So, these doors themselves do not provide for the installation of mortise locks. So if you want the door to lock, you will need to use a different design.
Another disadvantage is that these doors cannot provide high level thermal insulation comparable to classic models. That is why such products are often installed indoors rather than at the entrance to the house from the street. They also provide less sound insulation.
For housewives, a significant disadvantage is that the niche into which it is recessed sliding design, collects a lot of dust. Moreover, these are quite hard-to-reach places; cleaning here is difficult.
There is also the possibility that at one point the sliding door will jam. This probability especially increases if the rollers are askew. That is why it is necessary to select a model only with the highest quality mechanism and periodically check its serviceability.

How to install?

Sliding doors are fairly easy to assemble yourself. Assembly will not take much time. This can be done using a simple scheme, but first you need to make preparations:

First of all, you need to take all the necessary measurements to determine the size of the door leaf. Moreover, you need to add about 5-7 cm to all measurements.
You can buy ready-made canvases according to your measurements, this will greatly simplify the work.
When you have made all the necessary measurements, you need to draw lines that will mark the future door.
To the top line you need to attach wooden beam, and his Bottom part should be located a little higher. The length of such a beam will be equal to twice the width of the opening. It must be secured with a self-tapping screw.
After this you need to secure the profile. He will act as a guide. This must be done in such a way that the sash and the wall together form free space. This is necessary so that the door subsequently slides smoothly along the wall. The profile must be perfectly straight and located in an even line.
Then you should come to collecting the carriages. Once they are assembled, you will need to test how smoothly the blade moves. When assembling, the carriages are separately inserted into a pre-assembled profile and moved.

Don't forget to install movement limiters and sealing. They need to be placed along the edges of the profile.
Then you need to make a mount for the carriage in the door leaf. It should be located in the center. After you have installed all the fasteners, you can install the door leaf. It needs to be placed tightly in profile and slightly raised.
After this, you need to secure the brackets to the bolts using nuts. But try not to tighten them too much.
Then you should insert the door leaf into the lower guides. But before that you need to loosen the bolts on the carriage.
After this, you need to hide the profile with decorative platbands. Don't fasten them too tightly. After this, you can proceed to installing the fittings.

To learn how to install a sliding interior door, see the following video.

When choosing sliding doors, you should pay attention not only to their appearance, but also to the characteristics:

plays a very important role soundproofing, since it is precisely this quality that is lagging behind this type of door. Pine models provide the worst protection from extraneous noise.
Pay attention to the material. It is better to purchase only natural products that meet all standards, since they are the most environmentally friendly. Try not to skimp on such products, as this can shorten their service life.

The door should fit harmoniously into the interior rooms where you plan to install it. The doors at the entrance to the living room should be the most luxurious and massive. Sliding doors to the hall can be purchased from solid wood, especially attention should be paid to products made from larch and ash. It is better to install denser, light-proof models in the hallway, corridor and closet.
But if you want to fill the corridor with light, then You can choose a glass model. It can visually expand a narrow corridor. Glass door perfect for the kitchen and goes well with small household appliances. When choosing these doors, also consider wall coverings.

If you want to install sliding doors in one-room apartment, try to purchase identical designs so that they create a harmonious ensemble. Also, in the kit for such a door you need to select the most suitable and reliable fittings.

Interior design options

The door in any room is one of the most basic elements. It should complement the interior of the room:

In some small apartments, doors are even installed instead of walls. This option is also suitable for zoning, so this door will play the main role.
If you are installing a structure in a room decorated in a classic style, it is better to purchase elite matte models. Gloss is unacceptable for halls and living rooms. Large white ones are best suited for such rooms. interior doors with luxurious decor.

If you want to install a door on a loggia, then panoramic models are perfect for you. In this case, you can give preference to designs in the form mosquito net. They are perfect for the warm season of the year. You can also use lattice doors.
It is better to install beautiful elegant models in the bedroom. These can be opaque glass products that reflect the classics. For wide and spacious rooms decorated in modern style, you can purchase frameless transparent doors. This is a great solution for a minimalist style.
Soft sliding screen doors are suitable for the dressing room. You can also use models with a mirror. Reviews show that they are very comfortable in such a room. Descriptions of such options in the interior are always enthusiastic.

Framing plays an important role in the design of sliding models. Frameless models look simpler and more modern. And products with frames are more luxurious. In this case, you can give preference to models with a wooden frame in wenge color.

They are used due to the fact that they provide more usable area, since they do not need a large opening radius. In addition, sliding doors can unite or isolate space different rooms due to its simple design. Sliding compartment doors are practical solution and modern style.

Sliding interior door system - what do they consist of?
1. Blade 2. Upper guide 3. Rollers 4. Lower roller

The principle of operation of single-leaf and double-leaf interior sliding doors

Types of sliding doors ( Photo of sliding doors in the interior)

1. Hinged doors – They consist of a guide located above the door, along which the door runs, and rollers run inside it, which in turn are attached to the leaf itself. It is recommended to use large rollers for reliability and durability of the mechanism. The door moves smoothly. Moves along the wall. The guide is closed with decorative material.
2. Cassette doors – They consist of the same mechanism as the mounted ones. It moves not along but deep into the wall.

Advantages and disadvantages of sliding compartment doors:

Interior compartment doors solve the following problems:
In the presence of non-standard openings
When there is little room to open standard door
To use the space near the opening.

Where to buy interior sliding doors in Moscow?

In the sliding compartment doors section we present big choice models, in addition, any can be made with sliding mechanism for single and double leaf sliding doors. The price for compartment doors is affordable and immediately indicates the cost per set. In addition to the fact that in our store you can buy compartment doors inexpensively, we have a promotion when purchasing 3 doors or more. The cost of installing a sliding interior door is 2,500 rubles.

If you have any questions, you can leave a request at back call or call back by phone +7 495 003 10 23 at a convenient time for you.

Sections