Chair made from car tires. Crafts from tires: flower beds, flower beds, figures, garden furniture

Don't rush to throw away your old car tires. After all, you can make furniture from tires with your own hands. Such things always have individual warmth and uniqueness. The proposed master class will help you master the technology of making furniture from tires. Recommendations from designers and specialists will reveal the secrets of practical implementation original ideas on creating furniture from tires.

What you will need: materials and tools

First of all, you need to collect the required number of tires. Their number depends on the intended design of the furniture or the number of elements of the furniture set. If your own supplies are not enough, then you can contact tire fitting specialists. As a rule, they are ready to give away tires that have outlived their automotive age for free.

In addition to the tires themselves, various auxiliary materials may be needed. It is difficult to predict all of them. But the use of some improvised things is quite predictable. It's good to have at hand:

• oriented strand board (OSB, OSB);
• bendable plywood;
• thin and dense furniture foam;
• felt;
• sackcloth;
• rope;
• wooden blocks;
• furniture or homemade legs;
• self-tapping screws

The set of tools varies due to the complexity of the operations performed. More often before starting installation work prepare:

• drill or screwdriver, drill bits;
• grinder (if you have to cut tires with a metal court);
• construction or furniture stapler;
• scissors;
• cutter or knife (a shoemaker's knife or one with a retractable blade will do).

In order to make furniture from tires with your own hands, you may need other tools. The need for their use is dictated by specific conditions. Skilled craftsmen will always have a screwdriver, pliers, and a hacksaw on hand. These are optional (optional) tools that can significantly facilitate the performance of certain operations.

What kind of furniture can be made from tires?

The range of furniture made from tires is quite rich. You can make them as separate ones with your own hands simple elements, and complex headset sets.

The traditional list of furniture made from tires includes:

• ottomans or seats without backrest;
• armchairs, rocking chairs, chairs on wheels;
• sun loungers;
• tables of many varieties (coffee, coffee, tea);
• tables;
• chairs;
• sofas;
• shelves;
• multifunctional stands(for newspapers, umbrellas, shoes).

Almost all common furniture items can be presented as tires. The available results amaze with the variety and originality of the implementation of truly creative ideas.

General technology and procedure

You can make a lot of furniture items from tires, give them the most different shape. However, manufacturing technology has a number of common procedures and operations. They are carried out in a certain sequence.

• First, the tires are cleaned of dirt. You can use special cleaning products to wash tires. This will give the tire a shiny, glossy look.
• Strengthen the base (frame). For this purpose, oriented strand board (OSB) is mainly used. Its configuration can be very different. Reinforcing spacers are inserted inside the tire. Mount legs or wheels. It is desirable that they coincide vertically with the locations of the spacers.
• Sometimes the frame of a chair or table requires the connection of several tires. They can be fastened with self-tapping screws, furniture ties or bolts.

Tires can be built on top of each other, and backrests and armrests can be made from metal-court scraps. Tires are used in the frame different diameters. This diversifies the shape and appearance.

• Decoration. There are a great many options for external decoration of furniture made from tires. You can paint it acrylic paints side surfaces. There are versions of an interesting combination of materials: the sides or seating areas are covered with leatherette and painted in bright colors. First, the gloomy black color is shaded with white or red paint. Then a multi-colored pattern is applied. You can add expressiveness with clear dark contours. Leatherette is dyed using the same technology.

For the side surfaces, a cape is knitted. Sometimes it is replaced with parts of an old sweater. The prepared knitted fabric is secured at the bottom and sides. Top part tire overlaps hard material(OSB or plywood). The round knitted piece covering the top is connected with a hook to the side.

• Skillful cutting of the tire with a sharp cutter, grinder or jigsaw allows you to detach the parts from the metal court. They have sufficient rigidity and elasticity. Therefore, they can be used as legs, backs, armrests. You just need to give these segments the desired shape and fix them.
• The transverse sections give greater rigidity to the frame. metal plates. They are camouflaged with a braided harness made of intersecting strips. The parts are fastened with self-tapping screws or rivets.
• Combination gives good results various materials. The tires are cut into halves, spacer bars are inserted into each, soft foam is inserted, and covered with fabric.

For garden or country furniture It is better to make the soft parts of the seats removable. If necessary, they can be brought into the room. After all, drying quilted fabric or foam rubber after rain is quite a troublesome task. It’s better to save your labor and extend the service life of vulnerable elements.

If the structural parts of furniture made from tires are made using ropes or ropes, then nylon materials are better. They have increased strength and are not subject to rotting. Since nylon materials spring well, they are used for tension in seating areas. This gives additional comfort.

It is better to cover the surface of tables and tables, covered with strapping or wrapped with twine (rope), with glass. Its transparency will not interfere with enjoying the pattern and texture of the material. The smooth surface will allow you to conveniently place various objects and dishes on it.

In the manufacture of furniture elements, car tires are often used. However, products made from bicycle or motorcycle tires are no less original and attractive.

Sometimes unique design requires turning the tires inside out. This procedure is easier to carry out with winter tires. It is softer, more elastic, and better suited to the required configuration.

Car tires are a universal material. They are durable and strong. They are not afraid of rain, snow, or heat. Furniture made from tires will be organically placed in a country house or terrace. country house or in a picturesque corner of the garden.

Everywhere today old tires are not used. But flower beds and sandboxes are trivial, because old rubber can also serve as furniture. It probably won’t be possible to make a sofa, although...

But such creative chairs can be made easily. Not to say that this is the height of aesthetics, but it is reliable and, most importantly, unusual. And if you wish, you can make a whole set of furniture, as in the picture: table, chairs, ottoman, you can come up with something else.

You will have to tinker a little with the seats, but this is not such a problem, you can not necessarily use this option, but make a solid seat. Imagine and everything will work out.

For example, ottomans are very easy to make. Since there is no need to attach backrests to them, all the work consists of to decorate old tires beautifully. That is, if you simply cover them with thick material, then the ottoman is ready.

These options are a little more complicated, but cushioned furniture it looks like it came from a store.

Or this option. You just need to figure out how to fill the middle. You can also attach legs.

For such armchairs and ottomans you need a table. But there are no problems with this at all, you just need to choose a flat tabletop. IN in this case glass is used. Stylish of course, but not very practical. Not many will dare put a table made of tires in a city living room, and in the country it is better to use a tabletop made of plastic or wood.

Dacha, how many positive emotions are intertwined in this word. For a very large group of people, suburban area is a place of creativity and relaxation of the soul. Therefore, they constantly harmonize the country space. However, not everyone’s finances allow them to do this through stores. Many people use what they have at hand, for example, to make country furniture; old, worn-out car tires will do.

Garden furniture made of tire rubber, what and how

Old tires have a fairly wide range of applications. summer cottage, from them they produce all kinds of figures of animals, birds, flower beds look good from them. Tires also make excellent pieces of furniture, mainly:

• armchairs;
• benches;
• sofas;
• country tables;
• poufs;

But in order to bring all these items to life, you will have to seriously work with your hands.

How to make it yourself

Tires can be used to make both simple and complex pieces of garden furniture.

There are a lot of options for furniture made from used tires. You can use ready-made sketches or make something of your own based on them, you just need to connect your imagination to this matter.

It's not good to throw away what you can reuse.

This is especially true for those harmful to environment materials like tire rubber.

Used tires are a valuable material for craftsmen.

At home, in the country and in the yard you can build a bunch of interesting crafts from old tires.

Skillful hands of masters turn them into proud swans, decorative wells, comfortable benches.

How to make furniture from tires with your own hands - further in our article.

There are several options for creating tables from tires. Let's look at each of them in detail.

On two stacks of wheels

Washed, dried, degreased rubber wheels without discs are first painted with acrylic, bitumen, enamel paints.

The most suitable coloring mixture for treating tires is rubber paint. It can withstand hundreds of cycles of sudden temperature changes, as well as precipitation, without cracking or deforming.

The tires are stacked one on top of the other in the place where the table needs to stand. You need to install two stacks tires 4 pieces each, preferably different colors, at a distance of about half a meter between the outer walls.

A rectangular sheet of strong material, which is at hand, is placed flat on top of two stacks of multi-colored tires:

• flat plywood;
• plastic;
• thick unbreakable;
• metal sheet.

To the top rail of each stack tabletop fixed with four screws diagonally in places of contact.

The edges of the sheet should protrude beyond external diameter tires by at least 10 centimeters.

The table cover can also be painted in any color pleasing to the eye.

To prevent the wheels from moving, there are two ways to fix them:

• inside each stack of tires pour earth or sand;
• every joint between tires coat with a layer of binder- hot, 1 cm thick, which will allow the tires to stick securely to each other after drying.

Depending on the design, such a table will be perfect for a country house, a playground, or a garage.

Magazine

This type of product is made from one tire, but larger sizes. Using the same principle, you can make stools and chairs.

In the form of a full dining table it, of course, will not work, but it can serve perfectly as a coffee table.

Let's get started:

1. Tire required sizes wash and dry.
2. Find four legs from an old chair or make them yourself.
3. Screw legs to the tire with screws.
4. Above put a circle made of glass, plywood or plastic to cover seat for disk.
5. Decorate- completely wrap the tire on all sides with yarn or create a pattern on the tabletop.

This decorative table with legs will serve as an effective stand for beautiful vase, magazines, pocket items.

Wicker

The next method will require a little more effort and creative skills.

Procedure:

1. Cutting a truck tire along the tread into two equal halves. One half will serve as a countertop.
2. Cut off the outer beads from five passenger tires smaller diameter to make it work five rubber rings.
3. Fasten with screws four rings from below on four sides vertically to the table top. Using the fifth ring, connect together the vertical rings on the floor surface. This will be the reference plane of the table.
4. Remains of rubber strips weave the seat hole tightly for a disk in a table top.

It's great to play games at this table. Board games in the evening at the dacha, read the newspapers.

Making chairs

To make chairs from tires, you need to complete the following steps:

1. Prepare one whole tire - wash, dry, degrease.
2. From another clean, dry tire cut off one outer side.
3. Paint both blanks in any color you like.
4. saw off using a hacksaw, four round wooden blocks with a diameter of 6 cm. Two of them are 90 cm long, and the second two are 45 cm.
5. Close the disc hole in a whole tire plastic mesh, sewing it with a harsh thread to the sidewall. This will be the seat of the chair.
6. Pull and sew the same mesh to the bead cut from the second tire. This will be the back of the chair.
7. Screw with long screws to the whole tire, two short blocks on one side - these will be two legs. Also screw two long logs on the opposite side - these will be the other two legs with a back.
8. Using screws, screw the cut round bead from the second tire with a stretched plastic mesh to the back between two tall blocks.

The country chair is ready, you can relax on it during breaks between work on the site.

Country chairs made from old tires

There are several options for creating a product. Let's focus on the most popular, spectacular and uncomplicated.

1. Cut off the sides at one of the tires. Cut the resulting ring on one side.
2. Cut off one third of the second tire along with the bead.
3. Paint two whole tires, one piece with the beads cut off to form a cut ring, and a second piece representing one third of the tire with the bead.
4. To make one chair from bald tires you need fold two whole tires on top of each other.
5. To fix the joints between them it is necessary coat with hot bitumen mastic . Glue or sew a plastic lattice onto the top tire with a strong thread.
6. To the top tire fasten with screws or bolt vertically one third of the tire with the bead at the bottom.
7. To the top of the vertical one third of the tire with bead also screw the middle parts with cut sides. Bend this part into the shape of the back and handrails of the chair.
8. Bottom ends secure with screws or bolts to the top lying tire.

It turned out very comfortable armchair from tires for a summer house, a private farmstead, a recreation center.

It is best to build several of these chairs for all family members.

Another chair option:

1. You will need one whole tire, and from the second tire you will need cut a sector one-third the size.
2. Wash both parts, dry them, and paint them with black rubber paint.
3. Find legs from an old chair or from a Soviet TV. Screw the legs with screws to the bottom of the whole tire.
4. Saw off two or three wooden bars about 5x5 cm in size, 40 cm long. Sand and paint with black rubber paint.
5. Hole for disc in whole tire on top cover with a plywood circle, covered with leatherette. This will be the seat of the chair.
6. The inner cavity and ends of the second tire with the cut out sector are also covered with plywood and cover with leatherette. This will be the back of the chair.
7. Assemble the structure: fasten with screws two or three bars to the tread surface of the whole tire.
8. The backrest is also screwed higher to the bars.

The result is a cozy chair with a minimalist and laconic design.

It can be as in the photo or slightly modernized depending on the materials that are at hand.

Why not an impressive leather chair from a designer furniture showroom!

It’s not a shame to furnish not only a country courtyard like this, but also creative interior apartments or houses.

In Europe, such furniture in residential premises has long been not uncommon, because the environmental trend is gaining popularity every year.

Other furniture and crafts

At the dacha, every item, every useful thing is welcome. The spirit of fantasy and creativity is in the air here. It would seem to everyone unnecessary item there will always be a use for it. Worn automobile tires are a valuable material here, a strategic raw material.

They make excellent front gardens from it. flowering plants and green spaces. Tires are used to make brightly colored houses.

Benches for sitting, rocking chairs, funny bugs and striped caterpillars, flowerpots - this list of uses for old tires can be listed endlessly.

Useful video

This video shows the process of creating furniture more clearly:

Conclusion

The main thing in the process of creating crafts is a flight of imagination and collective creativity. You can involve the whole family in making furniture; children will also be happy to participate. This is how country masterpieces are born from old worn-out tires.

In contact with

Where to put old tires? This question worries many; in Russia, about a million people are thrown away every year. car tires. Summer residents actively use this resource to create crafts from tires for the garden, and they also actively decorate front gardens in city yards.

Crafts from car tires

The most common type of crafts made from tires are flower beds. In order to do a simple flower bed It is enough to use a small piece of plywood, tires and paint.

We cut out a circle from plywood, its diameter should cover the bottom of the tire, screw it on using self-tapping screws and paint the resulting flowerbed in any color. When the paint has dried, we install the flowerbed in the right place and fill it with soil, planting flowers.

Large flower bed in the shape of a flower

Necessary materials:

• Three tires
• Gloves
• Wax pencil (you can use chalk)
• Sharp knife
• Electric jigsaw or grinder
• Galvanized nails
• Paint (one or more colors)

On each tire we draw petals for cutting; if you use a wax pencil, it will additionally lubricate the cut area. The ends can be made smooth or pointed; use a knife to cut out the contours of the petals.

We cut the resulting blanks into two parts with an electric jigsaw, after which we turn each part inside out. We connect the parts in pairs using galvanized nails, and then assemble the flowerbed together.

You can also use four parts (two tires) for a flower bed. We paint the flowerbed in one or several colors and, after drying, place it on a flat area with the petals facing up. We fill it with soil and plant flowers.

Coffee table and tire ottoman

Materials:

• Plywood
• Tire
• Self-tapping screws
• Rope rope
• Wheels (for version with table)
• Thermo gun

It is necessary to cut two circles from plywood, with a diameter that covers the tire, and secure them to the wheel using self-tapping screws. We wrap the workpiece with rope so that the layers fit tightly to each other, securing it with a heat gun. For the top, we twist the rope in a spiral and secure it with a heat gun.

The ottoman is ready for coffee table Screw the wheels to the bottom. It looks beautiful and unusual, and is also suitable for apartment use; the only drawback can be the weight of the product.

All work must be done with gloves and with extreme caution to protect your hands from cuts. There are a lot of options for crafts for the garden from tires, you can use them to make small fences, large flower beds for flowers and seedlings, they can also be used to make garden furniture (tables and chairs), and various ottomans for the veranda.

Crafts from old tires for children

It is possible to make a playground with your own hands using tires. From them you can make two types of swings, sandboxes and decorations for the playground.

A large sandbox can be made by analogy with the previous master class with a large flower bed, if you add one or two more tires, you will get a sandbox for the entire yard.

Swing No. 1

Necessary materials:

• Tire
• Self-tapping screws
• Dye
• Old seat belts

We paint the tire and wait for the paint to dry completely. We close the hole inside the tire with seat belts and secure them with self-tapping screws. We tie the tire with chains on both sides (you can use strong ropes and cables). We fix the swing on the tree if suitable place no, you can make a base for a swing from timber.

Swing No. 2

Necessary materials:

• Tire
• Board and timber
• Bulgarian
• Self-tapping screws
• Dye

For the swing you will need a large wheel, cut it in half. We cut out two beams to strengthen the base of the swing, the size of the tire width. We make seats for swings from the board; the board should protrude 40 cm on both sides. We paint all the blanks in the desired color.

After drying, insert the timber into the tire from the side of the cuts and secure it on both sides with self-tapping screws. Afterwards we level the board for the seat and screw it to the reinforcing bars with self-tapping screws. Handles for swings can be made from old ones door handles, cable or rope. From the second part of the tire we make the second swing.

Creative people It’s easy to invent and make useful things from anything. Tires can easily be used to create furniture and much more. Various photos crafts made from tires can be found on the Internet, with their help you can find inspiration and improve crafts, adapt them for yourself, or make the same ones.

Photos of DIY tire crafts