Beautiful decor for photo frames with your own hands. How to make a wooden frame with your own hands: step-by-step description and recommendations Do-it-yourself wooden photo frames

home

Internet

Nowadays, homemade interior items are in great demand. Many stores have appeared selling goods of this category. Handmade products look original; the authors put in not only imagination and skills, but also a piece of their soul. And it’s nice to have in your home not standard products from consumer goods, but an individual product, which is in a single copy. However, for such products you will have to pay a tidy sum, since authorship is valued at a high price. It will be much cheaper if you show creativity, imagination and realize your vision of a household item, for example: photo frames, paintings, wooden mirrors.

Creative plans

Before starting any work, you always need to draw up a rough plan of action, prepare materials and the item you want to frame. Ready product should fit organically into the interior of the room, be it an office or a residential apartment. The frame cannot fail to match the style general interior. Also, the materials from which frames are made vary greatly in texture, quality, color scheme. The wooden frame itself can be in a simple style, or it can be with beautiful openwork carvings.

Even a simple, even frame made of wood is complemented with design elements that will give it a special style and originality. You also need to decide what exactly to focus on in your work. If the main thing in the project is the design of a finished frame, then it can be purchased in a store and transformed into a masterpiece at home. If the frame itself becomes the object of creativity, then it is better to make it yourself.

Selection of materials

Beautiful frames for paintings with your own hands made of wood are created when carvings are applied to them (floral, plot or simple ornament). For carving, use softer wood, especially if the carver is a beginner. Professional, of course, and oak board will make a pattern, but for a beginner it will be difficult, since oak is considered a very hard tree. You will also have to buy a set of cutters of different sizes.

Another option for making a frame with your own hands from wood is a simple wooden product, which is decorated on top with improvised materials. Nowadays, picture frames decorated with something unusual are fashionable. These can be pieces of bark, pencils, shells, buttons and other waste material.

Making a frame with your own hands from wood

Before making a picture frame from wood, you need to prepare following materials and tools:

plywood or fiberboard;
wooden slats, plinth or baguette;
hand saw or jigsaw;
miter box;
construction stapler;

PVA glue;
acrylic varnish or paint, brushes;
stain (if necessary);
plastic or metal loop;
nails or screws;
hammer or screwdriver (as a last resort - a screwdriver);
corner clamps;
sandpaper.

When planning to cover a picture frame with something (it’s easy to make one from wood with your own hands), prepare the material that is needed for this. You can lay out the required pattern on the table in advance to understand how it will look.

Step-by-step instruction

The second step in making a frame with your own hands from wood will be cutting the slats at an angle of 45 degrees. To do this you will need a saw and a miter box. A strip or block of wood is inserted into the miter box and sawed off along the line. Then we repeat the procedure with another bar. We combine the corners of two pieces of wood, you should get a right angle of 90 degrees. We apply this angle to the plywood and mark the length of the other sides. After this, using the marked marks, we make cuts in the other two corners. We attach the assembled frame to the plywood and check its size. If everything comes together clearly, you can proceed to the next stage.

The ends of the slats, cut at 45 degrees, are coated with PVA glue and pulled together tightly and left alone until completely glued (approximately 2 hours). After this, for better fastening, connect the corners of the slats with staples using a construction stapler.

Assembling a wooden frame

The last stage of making the frame will be fastening the parts together. There is small nuance. If you are attaching a painting or photograph permanently, you can glue it to plywood. Then everything is much simpler. The finished frame just needs to be nailed to the plywood or fastened with small screws. If the photo is inserted, then you will have to work extra hard.

In order for the photo to fit freely into the frame, you must leave a gap between the frame and the photo. In a purchased frame, wooden slats are processed to milling machine and a step is made for insertion. Not everyone has a router at home, so you need to do it differently. Make an additional layer between the frame and the plywood, for example from thick cardboard. Strips are cut to size corresponding to the width of the frame and glued along the perimeter of the plywood on three sides. There is no need to do this from above. A painting or photograph will be inserted into that slot.

Further sandpaper clean the surface and cover with a layer of varnish or paint. After drying, repeat the cleaning procedure and cover with another layer. Let dry. Acrylic varnish dries quickly and produces almost no unpleasant odors.

It doesn't take long to make a picture frame with your own hands from wood. All that remains is to attach a loop and hang it on the wall. The only thing I can recommend is to laminate the photograph so that you can periodically wipe off dust without damaging the photograph itself.

Variety of materials

You can create frames with your own hands from wood and metal, baguettes and plastic, polyurethane baseboards and simple branches. Nowadays there is such a free approach to the choice of materials that any flight of fancy can be realized. The frames are roughly knocked down with large nails, tied together from randomly sized branches, and burned blowtorch, peel off with a stiff brush. Everyone has their own approach. Whoever thinks of something will realize it in his work. Nowadays there are so many various materials and examples of other designers that you can, after looking at the photographs, choose the one that suits you.

Designer frame for mirror

Frames can be made not only from slats or bars. Let's consider several options unusual frames. For example, how to make a frame for a mirror out of wood with your own hands using small twigs? To do this, we take plywood and cut out a figure several centimeters larger in diameter than the mirror.

If, for example, it is round, then a larger circle is drawn, etc. Then the mirror itself is glued to the center of the plywood circle using liquid nails. A strip of plywood remains along the edges, which we will decorate. To do this, take wood glue and, in turn, coat each branch with glue and place it in a circle with the end in the middle. The work is meticulous and long, but the result will be a completely original thing.

Frame of twigs

Let's look at another example of an original photo frame. Anyone can make it from wood with their own hands. A photograph is glued to a sheet of plywood and a few centimeters of margin are left to the edges to decorate the frame. Branches of the same or different lengths are collected, thoroughly dried and treated with an antiseptic.

After this you can cover them acrylic varnish, or you can leave them untouched. Take a beautiful twine and make four bundles from an equal number of branches. The bundles are tightly connected to each other. The result is a frame of twigs, which is then glued to the free part of the plywood sheet.

Come up with your own version, create, search, try, and everything will work out! Good luck!

Hello, friends! The HeARTwood channel released an episode about how to make a wooden frame using a simple device. First, let's look at a simple way to make spring ties for gluing small frames.

To work, you will need either a Chinese drill or an angle grinder.
The grinder is convenient, it is always at hand. The main material will be a spring. It is desirable that it be made of thin wire. That is, it should not be very stiff, or you need a powerful spring. It is advisable to turn it round to round, but if it is a little stretched, then that’s okay too.

Steps to create a frame

You need to saw off the small half rings with a grinder. If the wire thickness is small, wire cutters are suitable, but it is not certain that they will hold up, so it is better to use a grinder.
Cut the rings so that there is not a whole ring, but about three quarters. We cut 8-10 such parts. It is not necessary to adhere very strictly to the size, the main thing is that you get rings.
If the spring is not compressed, you will have to straighten the coils with your fingers or pliers. The plane must be maintained.
We sharpen one side on the disk first, then the other. You will get some kind of cloves.
This is what the finished ring looks like.

Now we’ll make a few pieces and see how they work. To do this, take an oak strip, cut 4 parts, and assemble a small frame.
We take the ring, hook it on one side, pull it to the other, and fix it. Let it dry.
The big advantage of such small brackets is that you can install them by hand, you can put several pieces if you need more force.
The clamps are very simple to make, easy to use, and easy to install and remove. They are good to use on large vascular wood, for example, on oak they leave dots. They are not that noticeable. But on soft and finely vascular wood it will be a little noticeable. In principle, if you sand it a little, then these points will not remain.
So, the frame is glued together and the half rings helped with this. The big plus is that they are made in literally a couple of minutes and are very convenient and functional to use.

Frames for photos and paintings from standard lining

The cost of one 40x50 linden frame is 38-42 rubles (depending on the cost of packaging the lining). Pine will cost half the price, but there will be a lot of unpresentable knots.
It took one pack of lining to produce 20 frames. One board makes 2 frames, and a standard pack contains 10 boards 2 meters long. Dimensions 40x50 - “internal” correspond to the size of the painting. External dimensions The frames are larger, so the trimmings were minimal, solely due to cutting the corners.
Cut the boards in cross section as follows:

The actual production of the frames took about 2 hours of work: Trimming the blanks. Gluing the frames with standard PVA wood glue (fixing the corners with a stapler on the reverse side).
It took two days to dry, then about another hour was spent tinting the frames with a wood glazing compound, and that’s all...
The frames turned out quite good, they look a little brutal, but for oil works, as an option, they will do just fine...

You can, of course, make frames from regular board, but labor costs will be much higher.
zen.yandex.ru

How to make a wooden frame with your own hands

Creative plans

Before starting any work, you always need to draw up a rough plan of action, prepare materials and the item you want to frame. The finished product should fit organically into the interior of the room, be it an office or a residential apartment. The frame cannot but match the style of the overall interior. Also, the materials from which frames are made vary greatly in texture, quality, and color. The wooden frame itself can be in a simple style, or it can be with beautiful openwork carvings.

Even a simple, even frame made of wood is complemented with design elements that will give it a special style and originality. You also need to decide what exactly to focus on in your work. If the main thing in the project is the design of a finished frame, then it can be purchased in a store and transformed into a masterpiece at home. If the frame itself becomes the object of creativity, then it is better to make it yourself.

Selection of materials

In order to make a wooden frame with your own hands, the necessary wood is selected. Basically you need to look at the pattern and structure of the tree, since, in principle, any species is suitable for this. If the frame will be painted later, then the simplest one is chosen - pine or spruce. If the structure of the wood is visible and the product is subsequently coated with varnish or stain, then you need to take wood with an original pattern. Walnut, ash, cherry, and linden look very beautiful.
Beautiful frames for paintings with your own hands made of wood are created when carvings are applied to them (floral, plot or simple ornament). For carving, use softer wood, especially if the carver is a beginner. A professional, of course, will make a pattern on an oak board, but for a beginner it will be difficult, since oak is considered a very hard tree. You will also have to buy a set of cutters of different sizes.

Making a wooden frame

Before making a wooden picture frame, you need to prepare the following materials and tools:
plywood or fiberboard;
wooden slats, plinth or baguette;
hand saw or jigsaw;
miter box;
construction stapler;

PVA glue;
acrylic varnish or paint, brushes;
stain (if necessary);
plastic or metal loop;
nails or screws;
hammer or screwdriver (as a last resort - a screwdriver);
corner clamps;
sandpaper.
When planning to cover a picture frame with something (it’s easy to make one from wood with your own hands), prepare the material that is needed for this. You can lay out the required pattern on the table in advance to understand how it will look.

Step-by-step instruction

The first step is to measure the size of the painting and cut out a square or rectangle from plywood or fiberboard. Its size should be larger than the picture by the width of the wooden slats. Having attached a picture or photograph to the plywood, outline it with a pencil so as not to stain the object while working. The painting can then be put aside until the work is completed.

The second step in making a frame with your own hands from wood will be cutting the slats at an angle of 45 degrees. To do this you will need a saw and a miter box. A strip or block of wood is inserted into the miter box and sawed off along the line. Then we repeat the procedure with another bar. We combine the corners of two pieces of wood, you should get a right angle of 90 degrees. We apply this angle to the plywood and mark the length of the other sides. After this, using the marked marks, we make cuts in the other two corners. We attach the assembled frame to the plywood and check its size. If everything comes together clearly, you can proceed to the next stage.
The ends of the slats, cut at 45 degrees, are coated with PVA glue and tightly tightened with corner clamps, left alone until completely glued (approximately 2 hours). After this, for better fastening, connect the corners of the slats with staples using a construction stapler.

Assembling a wooden frame

The last stage of making the frame will be fastening the parts together. There is a small nuance here. If you are attaching a painting or photograph permanently, you can glue it to plywood. Then everything is much simpler. The finished frame just needs to be nailed to the plywood or fastened with small screws. If the photo is inserted, then you will have to work extra hard.
In order for the photo to fit freely into the frame, you must leave a gap between the frame and the photo. In a purchased frame, wooden slats are processed on a milling machine and a step is made for insertion. Not everyone has a router at home, so you need to do it differently. Make an additional layer between the frame and the plywood, for example from thick cardboard. Strips are cut to size corresponding to the width of the frame and glued along the perimeter of the plywood on three sides. There is no need to do this from above. A painting or photograph will be inserted into that slot.

Next, clean the surface with sandpaper and cover with a layer of varnish or paint. After drying, repeat the cleaning procedure and cover with another layer. Let dry. Acrylic varnish dries quickly and produces almost no unpleasant odors.
It doesn't take long to make a picture frame with your own hands from wood. All that remains is to attach a loop and hang it on the wall. The only thing I can recommend is to laminate the photograph so that you can periodically wipe off dust without damaging the photograph itself.

Variety of materials

You can create frames with your own hands from wood and metal, baguettes and plastic, polyurethane baseboards and simple branches. Nowadays there is such a free approach to the choice of materials that any flight of fancy can be realized. The frames are roughly knocked down with large nails, tied together from randomly sized branches, burned with a blowtorch, and stripped with a stiff brush. Everyone has their own approach. Whoever thinks of something will realize it in his work. Nowadays, there are so many different materials and examples from other designers that you can look at the photographs and choose the one that suits you.

Designer frame for mirror

Frames can be made not only from slats or bars. Let's consider several options for unusual frames. For example, how to make a frame for a mirror out of wood with your own hands using small twigs? To do this, we take plywood and cut out a figure several centimeters larger in diameter than the mirror.

If, for example, it is round, then a larger circle is drawn, etc. Then the mirror itself is glued to the center of the plywood circle using liquid nails. A strip of plywood remains along the edges, which we will decorate. To do this, take wood glue and, in turn, coat each branch with glue and place it in a circle with the end in the middle. The work is meticulous and long, but the result will be a completely original thing.

Frame of twigs

After this, you can cover them with acrylic varnish, or you can leave them untouched. Take a beautiful twine and make four bundles from an equal number of branches. The bundles are tightly connected to each other. The result is a frame of twigs, which is then glued to the free part of the plywood sheet.
Come up with your own version, create, search, try, and everything will work out! Good luck!
fb.ru
Another article on the same topic.

Various frames are used to frame paintings, favorite photographs, and children's crafts. You can buy them in the store, but they are different standard sizes And appearance, and designer products have a high cost, which is not always justified. How to get out of this situation? It will take a little patience and the ability to work with simple carpentry tools. You can make a wooden frame with your own hands. If you have experience, you can create a real work of art yourself by decorating the products with original carvings.

For photography custom size You can make a wooden frame yourself.

How to make such a frame with your own hands? There is nothing complicated about this; wooden slats or plywood are used as the main material; patterns can be cut out with a jigsaw. Before work, you should take measurements and think through design options.

To make a frame with your own hands from wood, you need to prepare the following materials and tools:

Sawing wooden blocks at an angle of 45° is done using a special tool.

wooden slats of the required length and thickness (if a carved frame is being made, you can use a plywood sheet for this);
a sheet of thick cardboard;
acrylic paints, finishing varnish;
a set of brushes for decoration;
jigsaw with a set of files;
nails;
hook or metal loop;
Sander;
sandpaper.

Wooden frame with passe-partout

Any wood can be used for the frame with mat. The product is manufactured in the following sequence:

Using cutters you can make different patterns.

First, the dimensions are measured with a ruler. If the edges of a photograph or painting are slightly worn, it is best to trim them slightly.
On thick cardboard, use a pencil to mark the position of the photograph. After marking, the resulting rectangle is carefully cut out. It is allowed to use scissors, a special stationery knife with replaceable blades. A special cutter designed for working with mats is best.
Using a jigsaw, 4 elements are cut out for the future frame. End internal corners done at an angle of 45 degrees. It is necessary to ensure that the edges are even and smooth, otherwise, when gluing, a high-quality connection will not work.
A small amount of wood glue is carefully applied to the ends, the elements are connected to each other, and clamped with clamps.
You can use glass for the frame, which will protect the photo or painting from damage. You can cut the glass yourself; for convenience, use a glass cutter. From a specialist you can order not just smooth glass, but glass that is already decorated. This frame will become even more attractive and stylish.
To install the glass first on back side special grooves are made in the profile. The grooves are marked to a depth equal to the thickness of the glass.
On the front side of the product you can provide original decoration. There are many options, you can use your imagination if you wish. The frame can be painted, gilded or varnished. The most simple option is the coating of wood with varnish. To do this, first polish the surface and remove all dust. After this, the wood is carefully varnished with a brush. You can use both transparent mixtures and those with any shade.
When everything is ready, you can start assembling the frame. If the product is dry, it must be carefully laid face down. After this, glass and mat are placed on top (it should fit tightly to the wood). A photograph or painting is attached to the back of the passe-partout; a second piece of thick cardboard is used to fasten the back part, thin plywood, a piece of fiberboard. The backdrop is attached to the product with small galvanized nails. It is necessary to ensure that the nails do not pierce through the frame. You need to attach a loop or hook from the top. If the frame will be used for a shelf or table, then it is best to provide a special stand instead of a loop.

Types of baguettes for paintings

After all the parts are ready, they are glued together with PVA glue.

Today you can make baguettes for photographs and paintings with your own hands. The most popular material for implementing ideas is wood; frames can also be made from plastic and metal. Wood is the most expensive material, but at the same time the highest quality, durable and beautiful. A real classic type baguette is made only from wood. It can be made in a modern minimalist style or more elaborate with intricate carvings that would be great for an antique Renaissance painting.

The wooden frame is universal option, it can be used in any interior. It is best to take wood from deciduous, tropical, coniferous species. Ideal option is pine, ramin, exotic ajos. The wood must be dense and not form cracks or chips during processing.

The wood must be selected so that it does not absorb moisture, is not subject to temperature influences, and is durable.

You can make regular classic, reverse, flat, or service profiles from wood. The surface of the frame can be coated with varnish or paint, you can use special oils, silver or gold coating.

After the frame is ready, it needs to be decorated, this can be done by painting it with acrylic, or by gluing beads or shells on it, gilding it or aging it.

Aluminum - more cheap option for making frames, but there are certain limitations. Similar hardware They are not decorated as richly as wooden ones; design options are limited. Lepnina and others decorative types decorations for metal frames are not used. Usually they are simply painted or varnished, covered with special films. Aluminum moldings are not always suitable for home use; they are usually used in office premises.

An aluminum baguette is perfect if you need to design posters, large photographs, diplomas, posters, and graphic images. The advantages of aluminum frames are as follows:

high quality and strength of the frame;
low profile weight;
the ability to use special paints that literally saturate the material.

Plastic baguette for interior

Plastic baguettes are sold by the meter; they just need to be cut and glued.

Plastic frames are not only high quality, but also cheap. From such material you can create an imitation of a wooden frame, but the cost and weight will be much less.

You can use plastic baguettes (most often made of PVC) for mirrors, photographs, modern paintings, and children's crafts.

The assembly process is simple; you can purchase ready-made ones in many specialized stores. plastic profiles for making beautiful and durable frames.

Wooden, plastic or metal frame is better? It is definitely difficult to answer this question, since they all differ in their advantages. But working with wood is much easier, and the result is more attractive. The manufacturing process is not complicated, you just need to be careful and patient - the result will be amazing.

How often do we remember the bright moments of life, the smiles of our family and loved ones with the help of photographs. And so that you don’t have to take out a photo album every time, we place the most valuable printed frames in frames.

Despite the fact that there is a large selection of photo frames, you want something special that emphasizes the plot and fits into the interior. To do this, we recommend making the frame yourself because making a photo frame with your own hands from improvised means perfect solution for those who value individuality, originality, handmade work and savings.

To create a special photo frame, almost any objects that surround you are suitable. The design idea, as well as the method for its implementation, can be found on the Internet or come up with yourself.

We offer some tips that may be useful to you:

First you need to decide on the size and type of frame. To do this, you need to decide where exactly it will be located (on the desktop, wall, mantelpiece, window sill, in the nursery, living room, etc.). This will help you choose a style and size that will allow the photo frame to fit into your decor.
Choose the execution technique and materials from which it will be created. interesting product.
Find out the features of the things that will become the basis of your masterpiece (how to store, what to combine with, attach, etc.).
Release working space and prepare everything you need for work so that nothing gets in the way and everything you need is at hand.
In a creative mood, begin the process of creating your masterpiece.

Paper photo frame

This is one of the easiest to implement and cost-effective frameworks. To make it, all you need is paper, scissors, a ruler and a simple pencil. You can pre-paint the base of the product (a sheet of paper) yourself or invite your child to do it. A frame made from a sheet with printed text (different font, size, style) will look original.

The size and shape of such a photo frame will depend only on the wishes of the author and paper parameters.

Cardboard photo frame

Cardboard is an easy-to-use material. It is easy to cut, bend, paint and glue. This material is strong enough to be used as a frame.

If you use colored cardboard, then no additional decorations are required. In other cases, the cover for the photo can be decorated as you like, using both purchased and various improvised materials.

Paper photo frame

Paper can be not only the basis of a frame, but also a decorative element that attaches perfectly to almost any surface.

You can twist tubes from newspapers and magazine pages and stack them in a well (weave them or place them side by side). Paper circles of different sizes made using the quilling technique are used for decoration.

A photo frame made using the origami technique or using embossing looks stylish.

Three-dimensional frames, including double ones, will highlight the photograph and fit into the interior. An interesting technique in creating a masterpiece is the use of paper modules or paper with torn edges. If children are involved in the process of making the frame, then use applique.

Wooden photo frame

One of the most popular materials for making a photo frame - wood. Buy a ready-made base or blanks and decorate it with improvised means. And if you have the appropriate skills, make the frame yourself.

It is appropriate to burn a pattern or design on a wooden frame, as well as cut out a pattern. Photo frames made from tree bark or decorated with small blocks look unusual. Original decoration the shavings will serve.

Interesting ideas for creating a photo frame from improvised materials

A photo frame is one of those necessary things that can realize almost any idea of the creator. There are many articles and tips on how to make a photo frame with your own hands and what materials to use. Any frame, even the simplest one, will always be unique.

Here are some frame ideas that might interest you.

From sea stone

Due to the variety of sizes, shapes and colors, sea pebbles are an original and universal decoration. To decorate the frame, you can choose either different stones or elements of the same size, shape or color.

Pebbles can be decorated, drawings can be applied to them, or other decorative elements can be glued on them. The stones are attached to the base using epoxy glue, moment glue, rhinestone glue (it is odorless) or acrylic gel. But before attaching the material, the surface of the pebbles and the base must be degreased and dried.

If this condition is met, the beautiful stones will not fall off and the photo frame will please the eye for a very long time. Additionally, you can coat the pebbles with a clear varnish.

From tree bark

A frame decorated with bark or made from it will fit perfectly into a rustic and eco-style interior. The indisputable advantage of bark as a means of decoration is its availability, because it is available at any time of the year.

It is preferable to remove the bark from a growing or freshly cut tree, or you can wet dry wood. It is convenient to decorate a photo frame with small pieces of raw materials. This is creative and interesting work, because no two designs are exactly the same. Large pieces of thin bark can be wrapped around the base of the frame, and hard material is capable of serving as a reliable and original frame.

Dry branches as a decorative element

Dry branches, which many consider to be ordinary garbage, can become a very interesting decorative element. Different size and the structure of the sticks will make each frame unique.

The twigs that will be used to make the frame should not be eaten by insects. The collected material must be well dried to avoid rotting and the appearance of various bugs. Before use, branches must be treated - painted or varnished.

Photo frame from a book

If there is an old unnecessary book (for example, the page inside is damaged or torn out), then it may become beautiful frame for photography.

This frame will ideally fit into any interior if the book has a textile cover.

To make such a masterpiece, just cut a hole in the cover that corresponds to the size of the photograph, glue it with inside file and insert an image into it.

Thread frame

When decorating objects, preference is often given to textiles and threads. A frame wrapped in coarse yarn will fit perfectly into country style premises, and a combination of colored threads or melange - great idea for a children's room.

Flowers or patterns can be made from yarn and attached to an existing base.

Don't doubt your abilities and don't be afraid to come up with a masterpiece yourself. There are many master classes on the Internet on how to make a photo frame with your own hands. Whatever frame you make, it will be unique and priceless handmade, made with shower.

Photo selection of original homemade frames

If you want to make a wooden frame with your own hands, then you can explore several manufacturing options and choose the one that suits you. At first glance, it’s easier and faster to buy a ready-made wooden frame in a store, but in reality it’s not difficult to make such a product, and required sizes(even non-standard ones), and you can decorate the frame to your liking. If there is a home large collection photographs that you plan to hang on the wall, you will need a lot of frames, and this will cost money. The way out of the situation would be self-production framework

Wooden frames can be made using simple tools or using a woodworking machine. The finished frame can be decorated with skillful carvings or a beautiful ornament can be burned out. Such products can be done by craftsmen, but it is better for beginners to try their skills on the example of a simple wooden frame made of smooth planks or slats.

Simple wooden frame

To make such a frame you will need: smooth wooden strips, a ruler or tape measure, a saw, a miter box, a plane if necessary, a simple pencil, staples for a stapler, thick cardboard or a piece of fiberboard, metal clamps, twine, sanding paper, paint, varnish and decorative elements to decorate the frame.

The procedure for making a wooden frame

Estimate the dimensions of the frame and select transverse and longitudinal wooden planks. You can cut a wooden strip into four elements. All parts of the future frame should be as smooth as possible, so if necessary, they can be planed and then treated with sanding paper.
The ends are sawed off wooden planks at an angle of 45 degrees. To ensure that the corners are even and the product comes out neat, it is better to use special device– miter box with suitable connectors.
The ends of the planks are greased with PVA glue and pressed tightly at an angle of 90 degrees. To fix the corners, the frame should be tied tightly with twine, making sure that the corners do not move. Can be used to secure the corners of half staples from a stapler. They are cut into two L-shaped halves. Next, these corners are inserted into the middle of the cuts at the ends wooden slats, and then the two sides of the frame are connected.
The PVA glue hardens for 15-20 minutes, and after that the frame is again treated with sandpaper and coated with paint or varnish. You can use stain or potassium permanganate, which also gives wooden products beautiful brown shade.
The reverse side of the frame is cut out of thick cardboard or a piece of fiberboard. If the design is not intended to be collapsible, then you can glue the back side to the frame with glue, and for a collapsible frame, use special metal clips.

Wooden frame with passe-partout

This frame is well suited for decorating photographs, as it will emphasize the expressiveness of both color and black and white photographs. Before you start making a frame, you need to carefully consider not only the size of the frame, but also its pattern, as well as the color of the mat.

This decorative frame is made of wooden planks and thick cardboard (for passe-partout). Profiles for a wooden frame can be very different - smooth, with carvings or patterns; the type of passe-partout also varies - thickness, color of cardboard, its pattern. In this regard, you can choose frame details that will be in harmony not only with the photograph or painting itself, but also with the entire interior of the room. This is especially true if you plan to hang several paintings - they must be combined with each other. For example, on dark walls or surfaces rich color Light wooden frames look good. Accordingly on light walls You can hang paintings and photographs in dark frames.

Sections