home
Kinds
DIY key holder made of plywood. DIY wall key holder made of wood

DIY key holder made of plywood. DIY wall key holder made of wood

A key holder is an interesting and necessary home interior detail that will help keep the keys to your house, car and garage visible. A thing that is truly necessary for everyday life. It will decorate and complement the interior design, and also speaks of the subtle taste and stylish choice of the owner. The device is attached to the wall, stored on the table or carried in your pocket. You can buy a key holder, but it’s easier to make one yourself from old wooden boards, magnets, frames, seat belts, and even old spoons and forks.

This device is made of a natural board on which four metal bolts are placed. The key holder attaches directly to the wall and is a great addition to any home decor. Her style combines two directions: rustic and modern. The board was not specially treated to preserve its natural beauty.

The key holder using an old picture frame looks original. It is painted or decorated with flowers, ribbons or fabric - it all depends on the imagination of the master. The hooks are screwed along inside top edge of the frame. Their number is determined by the size of the selected square and the number of sets of keys that need to be stored.

The next key holder was made from a large key, to which several hooks were attached. This device is made in an antique style and has a universal color.

The key holder is made of thin wood in the shape of a small house. Its inhabitants are two wooden figures, which are taken out along with the keys. The front of the house is decorated with a small heart, and the keychains are made in the shape of a man and a woman. The partners' figures are connected in the evening, when the keys are placed in the home.


Ideal for lovers of minimalism and naturalism, a key holder in the form honeycomb. Five magnetic hooks keep your essentials in one convenient place. The wood is sanded and treated with machine oil to bring out its natural warmth.

The second version of a similar device has a cream color combined with golden magnetic hooks.

DIY key holder ideas

1) What to do with silverware that is not suitable for food consumption? They can be adapted to fit original key hooks. To do this, take thin forks and spoons (3 pcs.), acrylic paint, small wooden squares, glue and three brass triangular hooks.

  • The easiest way to bend a fork is to throw it into boiling water. After it softens a little, use tongs to slightly bend the end of the handle upward.
  • Wooden squares are covered with 1-2 layers of acrylic paint.
  • Glue the underside of the teeth to the wood.

Make sure that the fork is straight and the amount of glue is moderate, otherwise the product will come out with a flaw.

  • Hooks are attached to the underside of the squares, with the help of which the key holder will be held on the wall.

2) While hiking and walking through the forest, you often come across natural materials, which can be adapted for decorative items. For example, tree bark can become the basis for a key holder in the hallway. It is cleaned of excess, sanded and coated with varnish or paint.

Key holder made from cut pine for a country house.

The shelf, which gives pleasant memories of a holiday by the sea, is made of sea driftwood. Decorates her Pine cone, lace and beads.

3) Weaving from newspaper tubes It’s not an easy task, but the products turn out to be quite creative. There are few consumables for such crafts - wound tubes, stain and PVA glue. Anyone who is familiar with this type of technology can make a completely budget key holder.

DIY decoupage key holder, photo

You can make an original piece of furniture from a cut of wood treated with sandpaper and coated with stain.

To create a uniform top layer, apply stain at least 2-3 times. After each application of liquid, the product is dried.

The wood is left in its natural color or a design is applied in decoupage style. The cut is first covered acrylic varnish, and then apply the design tightly (face down). After this, the product is dried for 2-3 hours. Before rolling the pattern, the paper must be wetted. The procedure is carried out until the whitish layer is completely cleansed and the pattern is clearly visible. Finally, the top of the key holder is coated with acrylic varnish.

Products in the romantic shabby chic style, when the surface is specially aged, look light and elegant.

The housekeeper in the shape of a house is decorated rustic pattern using decoupage technique. Its base is plywood or thin board. Hooks are attached to each corner of the device.

DIY wooden wall key holder, master class

For a universal key holder you need:

  • two pieces of wood: the main part (50 cm x 45 cm) and an auxiliary part (shelf 20 cm x 5 cm);
  • stain;
  • liquid Nails;
  • 2 clamps;
  • sandpaper.
  • flower pot ring;
  • 3 hooks;
  • flower.

To begin, two pieces of wood are cut out, sanded and painted. Hooks are attached to the main shelf on the back.


Using two clamps and liquid nails, connect the wooden base to the shelf.


Then screw in the hooks for the keys and the holder for the flower pot.


The rim of the pot can be painted golden and then placed on a shelf. Choose succulents as a flower or use a storage pot small items.

DIY key holder drawings

Scheme for cutting out a key holder from plywood.

Key holder in the form of a house “He and She”

An organizer for small items and keys, made of plywood and decorated using decoupage technique.

A device for storing keys in the shape of a flying mouse.

DIY plywood key holder step by step with photo

For a simple plywood key holder you will need:

  • plywood,
  • paper,
  • glue,
  • calipers,
  • screws,
  • screws and small hooks.

A circle is drawn on a piece of plywood, and then the edges are leveled using a caliper. A rectangle is attached to the circle, from which the rod and teeth of the key are made.


The edges are cut with a jigsaw and sanded. Then the base is covered with paper or painted.


The edges of the paper are folded and trimmed with a blade.


To keep the key holder in a horizontal position, 2 crutches are attached to the rod. There are several hooks at the front.

DIY leather key holder with pattern, step by step

A square (12 x 12 cm) is cut out of a piece of bright leather. Bend the workpiece in half and mark a rectangle (8 x 2 cm) in the center, not reaching the edges 2 cm. Its edges are coated with Moment glue and a zipper is inserted. To decorate the key holder, you can apply embossing using a cliche. The template is preheated through the foil with an iron, and then pressed firmly against the skin with tongs.


The foil is removed. A zipper is sewn into the edges of the accessory. Excess parts are cut off. The edges of the product are covered with glue, not forgetting to insert a loop for keys. Then the ends are connected and secured with clamps. After drying, the corners of the workpiece are cut off and the edges are threaded.


Keys are placed in the ring and excess threads are removed.

Pocket key holder, photo

A pocket key holder has small dimensions, because it is carried with you in a purse or in a trouser pocket. Such models are made of leather, felt and leatherette.
A pocket key holder with a carabiner, worn on the trouser belt.

Key holder with buttons and four carabiners.


Model with spring-loaded fittings and ring.

DIY cardboard key holder, photo

Thick cardboard can also become the basis for a key holder. Pizza or cookie packaging is often used for such things. Consumables will be cheap, but the item may turn out to be quite creative. The cardboard is decorated with fabric, decoupaged, or pebbles and flowers are applied.


Wall fixture made of cardboard base, decorated with fabric and woven newspaper tubes.


Painted cardboard is complemented by bright houses.

Key holder in the shape of a hand

Lovers of original things will not be able to pass by this accessory in the form of a hand. Such an item can be made in the form of a picture, where a magnet is installed on each finger.

Key holder in the form of a separate beckoning hand.

How to sew a key holder with your own hands

Key holder in the shape of a cat. To make it you will need:

  • denim,
  • cotton for lining,
  • adhesive base,
  • lace,
  • a small piece of padding polyester.

The template includes seam allowances.

First, let's cut out the parts according to the diagram.


Using a cobweb we glue part 1 to denim blank 2. Fold the edges of the cotton, iron and sew with a zigzag.


Then the 2 pieces (jeans and cotton) are put together.

The blanks are folded along the seam and passed with an iron.


At the next stage, they begin preparing the ears. Parts 3 are connected at the edges.


Turn it inside out and smooth it out. The ears are sewn to the body, and the sides also go through.


In the picture, pink stripes mark the places for the holes of the cord on which the keys are attached.


All seams are stitched, leaving marked areas. The product is turned inside out and a lace slightly longer than the base itself is prepared. The fish is turned inside out and the edges are sewn together. The cat's face is embroidered.
The lace is inserted into the hole and the keys are attached.

DIY key holder from a box

From such a simple box you can make an original key holder using the decoupage technique, and decorate its walls with Chinese characters. They attract good luck and prosperity into the home.


A wooden cigar or tea box will turn into a real masterpiece in just a couple of days of work.

DIY felt key holder, photo

Felt is a practical material, soft and comfortable for sewing. Its colors are rich and bright, and the cost of felt is quite affordable. Key holders in the shape of funny animals are mostly made from felt.

You can make funny mice with your children. The keys are held on a cord, which is made of interlacing multi-colored threads.


Accessory “Sneakers” for little athletes.

The accessory can be crocheted or knitted from leftover yarn. It is decorated with embroidery, beads and buttons.

When starting to make a key holder, they take into account the interior design, the number of keys and their financial capabilities.

To avoid being in difficult situation when leaving home, you should take care permanent place for storing keys. For this purpose, most people use a key holder with a sufficient number of places. Having placed it in a convenient place, it is difficult to forget your keys when leaving for work or for a walk. When you return, you can quickly secure the ligament in its designated place. If you make a wall-mounted key holder with your own hands, it will definitely become a stylish element. You just need to show your imagination and carefully read the master class on making a specific model.

Read in the article

Wall-mounted key holder: a photo will help you find an idea

Having decided to make a wall-mounted decorative key holder on your own, you should decide on the size and design. Numerous photos presented by the authors are so useful device, will allow you to find suitable idea for subsequent implementation. You just need to decide which model deserves attention.


Various materials can be used to make key holders. Depending on the stylistic design of the corridor, preference is given to metal, wood, plastic, leather, their combination, as well as a number of other materials. The shape and design of the product is selected individually.

Wall-mounted key holders for the home have Beautiful design, and therefore can become a stylish element. You just need to show your creativity, come up with an interesting shape and choose a non-standard design.


Most often, the wall key holder is made open. In this case, you can quickly place the key in the designated place. Closed models require a special door that must be opened before taking or hanging the key. On the one hand, you don’t have to worry about accidentally falling the ligament. On the other hand, you will have to spend a little time opening/closing the door.



The functional purpose of products can be broader than simply storing keys. A wall-mounted key holder with a clock will allow you to control the time. When you are late for work, you can appreciate this opportunity. You don't have to waste precious minutes constantly checking the remaining time.

Product size may also vary. It all depends on their purpose. Key holders can be:

  • Wall-mounted. Located on the wall closer to the exit;
  • Pocket. Prevents keys from being lost inside the bag;
  • Tabletop. Closed models installed in the corridor;
  • Cabinets. Suitable option for those who have . By using closet doors, it will be possible to more rationally manage the limited space of the hallway.

The purpose of the product affects its dimensions. As a rule, wall key holders are large, and pocket key holders are small. This allows the latter to be carried not only in a purse, but also in a trouser pocket, reducing the risk of rubbing the fabric.


Various materials can be used to make all types of products. Each option deserves special attention during the selection process. It is worth studying the features of each material separately, so that later you can make right choice.


Making a wall-mounted wooden key holder yourself

Do-it-yourself wall-mounted wooden key holder is made from wooden elements, connected by means of nails and screws, as well as hooks. The simplest option would be a wooden board of small width into which a certain number of hooks are screwed. The manufacture of such a product requires a minimum of time. You can make a beautiful product even if you have no carpentry experience.


If you cannot make the product yourself, purchasing a wall-mounted wooden key holder can be the optimal solution. You can always pick up best option for a specific one, choosing an open model of an interesting shape.

Wall-mounted metal key holder for high-tech interiors

Metal products are highly durable and have large capacity. They are in demand in offices, schools, and business centers. In residential buildings, fixtures can add solidity and make the interior unique. They look especially advantageous in ones decorated in the Techno style, or.


Making a beautiful metal product on your own is quite difficult. Absence special equipment will not allow the formation of a strong connection of individual elements. It is best to buy a metal wall-mounted key holder in an online store. Here the price is usually lower than in regular stores, and the assortment is larger.

Metal products have a number of advantages. They:

  • They don't burn;
  • Do not melt;
  • They retain their shape well even under significant mechanical stress;
  • They can withstand temperature fluctuations even if there is a special protective layer.

DIY plywood key holder: simple and tasteful

Good for cutting. It allows you to create a product of any shape and size. It is enough to use it to become the owner of a stylish and functional product.

The advantages of plywood products include:

  • Dimensional stability. The material is manufactured in a factory, and therefore its characteristics are known in advance;
  • Light weight. The finished product can be mounted on any wall;
  • Easy processing that can be done at home;
  • Smooth surface, which reduces the requirements for subsequent finishing.

You can make a wall key holder with your own hands at the same time as key rings. They can be used instead of hooks. It is enough to align the keychain with the groove prepared for it.


To make such a product you should:

  • Purchase plywood with a thickness of less than 10 mm and rings with chains;
  • Prepare a jigsaw;
  • Cut to life size. The key holder itself will consist of an upper, lower part and key rings;
  • Transfer the contours of the template onto the plywood;
  • Using a jigsaw, cut out the elements of the future product;
  • Use sandpaper to polish the cut line;
  • Drill holes in the key rings for the rings;
  • Connect the upper and lower parts of the key holder. PVA glue can be used as an adhesive;
  • Finish the product and key rings.

Making a key holder with your own hands from cardboard

To ensure that the finished product holds its shape well, you should use thick cardboard for its manufacture. It is not necessary to purchase it specifically. You can use a box of cookies or any other product. This will significantly reduce the cost of making a key holder.

The photo will help you understand how to make a wall-mounted key holder with your own hands from a box. Based on the images presented, you can develop a sketch of your own product. It will help you understand what materials will be required to make the product. In addition to the cardboard itself, it is worth preparing hooks and materials that will be needed for decoration. Considering the low resistance of cardboard to mechanical impact, plywood overlays can be provided.


Examples from other materials: take advice

Combined designs, in the manufacture of which using different materials. Plastic products are popular. They can be used in any conditions. When making wall-mounted key holders with your own hands, photos on the Internet will come in handy, allowing you to choose the appropriate design.


DIY key holder: master class

The sequence of work will depend on the purpose, type of product, material used, as well as the desired design. You should work carefully, carefully completing each step. Special attention should be paid to the design of the product. The decoupage technique will allow you to form beautiful drawing on the surface even in the absence of specialized education.

Making a pocket key holder

If the product is planned to be carried in a purse or pocket, its size should be relatively small. You should focus on the dimensions of the largest key in the bunch. The material from which the key holder will be made must be durable and soft at the same time. Most often, preference is given to natural or artificial leather.


Do-it-yourself pocket key holders are made in the following sequence:

  • We prepare the material and tools: leather, ruler, awl, strong thread, scissors, preferred fastener. We are working on a sketch of the future product. Attention should be paid to the smallest details. It is better to depict the sketch in full size;
  • We cut out two parts: large and small. The width of the larger one should exceed the dimensions of the bunch by 2 cm. In this case, the keys will be conveniently placed inside. The length should be twice the length of the largest key + 8 cm, of which 5 cm will be for the parts of the one-piece valve. The small one will be the internal part of the valve, to which the mating part of the fastener will be attached. It should be 1 cm narrower than the wide part, and the length should be 4.5 cm. This is 0.5 cm less than the valve itself;
  • Sew on the fastener. The length of the Velcro should correspond to the dimensions of the front of the key holder. It should be fixed on a piece of thick fabric. To form stitches, use an awl to make holes in the leather. The Velcro should be located 2 mm from the edge. The main and counter parts are sewn on. The last one is to the inside of the valve;
  • We apply decoration. The product can be decorated using embroidery or decoupage. The applique also looks beautiful;
  • We connect the inner part of the valve with the main part. We make holes around the perimeter of the product in 3 mm increments. Sew from the inside to sewing machine or by hand, using a needle-forward stitch;
  • We cut out a narrow strip of leather with which the keys will be attached. Sew one end to the bottom corner. We fold the other end into a loop and secure it. The ring will be used to attach a ring intended for a key ring.

Making a wall key holder

You can make a wall-mounted key holder with your own hands in different ways. One option would be to use a branch of any tree. Preference should be given to oak, larch or other wood. It is advisable to choose a workpiece in the original form. The work is performed in the following sequence:

Photo Description

Use sandpaper to sand the wood. It is advisable to completely get rid of the bark, as it can cause insects.

We drill the required number of holes in the piece of wood that will be used to attach hooks and fix the finished product to the wall. The diameter of the hole is selected smaller than the diameter of the hook thread.

Using stain finished product the desired tone is given. After the composition has dried, the raised fibers are removed from the tinted surface using fine sandpaper.
The surface is coated with varnish, which gives the product a characteristic shine. Depending on the desired result, preference can be given to a matte or glossy composition. The choice will depend on the desired shine. We attach the key holder to the wall and screw in the hooks.

A housekeeper for the hallway with your own hands made of wood will look beautiful in or. For , issued in modern style, this option may not be the best choice. Various designs applied by electric burning can be used as decoration. Other options are also possible. For example, drawing a picture.

Decorate using decoupage technique

You can decorate a wall-mounted key holder with your own hands using the decoupage technique as follows:


The table on which the work will be performed is being prepared. The tabletop can be covered with old oilcloth or a standard garbage bag. Prepare a blank for the key holder to be decorated, white acrylic paint, sponge.

We dip the sponge into the paint and use a blotting motion to paint the workpiece. Using a sponge instead of a brush allows you to add a unique texture to the surface. If there are unpainted areas, you can use a brush. As a rule, the area where the hooks are attached is painted in this way.

Let the workpiece dry. The paint should not remain on your hands. It takes about an hour for the painted surface to dry completely. Apply a second layer and let the product dry for two hours. If the formed layer turns out to be heterogeneous, the base is visible in some places - another layer of acrylic paint should be applied.

Cooking adhesive composition, consisting of an equal amount of water and PVA glue. With its help, the napkin will stick to the base.

We are preparing a napkin. If it is three-layer, separate the top layer. The rest will not be needed for work. Extreme care should be taken not to damage the decor.
Using a fan-shaped brush, apply the adhesive composition to the key holder. Carefully glue the napkin in the direction from the middle. Carefully tear off the excess. Apply an additional layer of glue along the edges. Leave until completely dry.

Apply a layer of acrylic varnish using a brush. Let the layer dry. To ensure a sufficient level of protection for the formed decor, a minimum of five layers of varnish should be applied. This will allow you to securely fix the pattern on the surface and give the surface a characteristic shine. To give clarity to the formed contour, black acrylic paint can be applied to the edges of the product. After complete drying, any irregularities on the surface of the product can be removed using sandpaper, and then several layers of varnish can be reapplied.

Article

What is a person most often looking for before leaving home? This could be a mobile phone that you have to call from another or your home phone. Glasses that are always hiding somewhere. Well, the most important thing is the keys. It is their disappearance that causes the greatest stress when there are only a few minutes left before the meeting. To ensure that all these things are always in sight, it is important to know how to make a key holder with your own hands.

What can she be

A key holder is a small device, the design of which is limited only by the creative abilities of a particular person. She may be:

  • Wall-mounted. It is usually located closer to the exit at eye level, so as to always be visible to the eye. It may have hooks in its design, or a more creative way of attaching the bundle may be used.
  • Pocket. It is a small wallet in which keys are hidden. This product is useful because it allows you to prevent scratches on any gadgets, as well as prevent holes from appearing in pockets and bags.
  • Tabletop. In this case, it can be made in the form of a small box with attractive patterns. In order not to forget to put your keys in it, a special keychain is put on them.
  • Place it on the locker door. Many have a dressing table installed near the exit. Why not put the inside of the door to better use.

This item does not have to be only a place for keys. Additionally, it can be adapted for business or other notes. A special mount will be useful for glasses or mobile phone. In addition, additional shelves will allow you to remember where your brush and shoe polish were left last time. You can also store portable storage devices (flash drives) here, or their covers, which inevitably tend to get lost somewhere. If wall-mounted key holders are located close to the door, then it is better to provide additional levels of protection so that no one sticking their hand in can take possession of the key ring.

There is a huge amount ready-made options. They are designed taking into account the location where they will be used. For office or other companies, they make metal products that have a built-in lock. Hotels can boast of solutions that are created for a specific interior. Warehouses are not fancy, but are designed to serve their primary function rather than being pleasing to the eye. But renovating a house or apartment is a reflection inner world its inhabitants. Therefore, it requires an individual approach.

Options for wall key holders

In the hands of a creative person, any little thing can become an element of design or decor. To make the simplest version you will need:

  • intricately shaped branch;
  • metal hooks;
  • self-tapping screws;
  • dowels

As the first element good decision there will be a knot from oak, larch or other wood, the wood of which is highly durable. But it doesn’t matter, you can take what you like the most.

  • The wood is sanded with sandpaper. If possible, the bark is peeled off. This must be done because It may have unpleasant neighbors who will undermine the wood.
  • Using a drill, several holes are drilled. Everything will depend on how many key rings there are in the family. The diameter should be slightly less than the diameter of the hook thread. Two additional ones will be required for mounting to the wall.
  • To give the desired tone, the product can be coated with stain. After complete drying, it is worth walking over the surface with fine sandpaper to remove any raised fibers.
  • The next step is varnish. It will give the pendant a complete look. You can use both matte and glossy, everything will depend on what would be better suited to the interior.
  • The element is applied to the wall, and marks are made for fastenings for installation.
  • The holes are prepared using a hammer drill, dowels are inserted and the key holder is screwed into place.
  • The screw caps are recessed. They can be decorated with overlays or wood putty.
  • The finishing touch There will be screwing in hooks and hanging out bunches of keys.

This option will be great solution for baths, houses made of logs or logs. Well suited to interiors where wood was used for decoration. Additionally, each hook can be marked with some symbol. They are applied using an electric burner or another method.

Most people have picture frames at home. Some of them may have been collecting dust on the shelves for a long time, because there is nowhere to put them. There is an advantage to breathing new life into them. For this you will also need:

  • glue;
  • a small piece of plywood or fiberboard;
  • decorative hooks.

If you don't really like the appearance of the frame, then you can sand it and paint it in the color that suits you best. Plywood or fiberboard is adjusted to size so as to fit on the protruding sides of the frame. Additionally, this element can be covered with any fabric. In this case, you will need to make a gap of several millimeters on each side. The cover is fixed with glue. They also attach the hooks to the surface. The final touch will be installation on the wall.

Another option is to not use sheet material to cover the frame. After processing it, it is enough to screw the hooks into the inner upper end and further decorate them.

If you have jigsaw skills hand saw or electric, then you can implement another unique project. For it you will need:

  • a piece of plywood measuring 25x15 cm;
  • stain or paint.

Before starting production, you should think about what shape you would like to see the keychains in. This could be a figure of a boy and a girl, circles of various diameters, figures of objects to which keys belong. Next, you can find a suitable simple drawing on the Internet or draw it yourself. After that:

  • The ends of the board are processed. The chamfer is removed and the corners are rounded. This can be done manually with sandpaper or using a sanding machine.
  • The drawn or printed picture is applied to the plane. This must be done so that its lower part coincides with the lower edge of the workpiece.
  • The image is transferred with a pen or pencil. You can simply crush it with a suitable metal object.
  • The lines are drawn so that they are clearly visible.
  • Manual or electric jigsaw, in which a file with a small tooth is installed, cuts are made along the intended contour.
  • The figures are put aside.
  • The main sheet is trimmed by 5 mm from the bottom end. This is necessary so that the key rings protrude a little.
  • The surface of the cut products is sanded to remove all chips. Holes for the rings are drilled.
  • If desired, the surface can be treated with varnish, paint, stain, or some kind of pattern can be made using a burner or cutting knives.
  • The product is screwed to the wall.

This key holder can be customized for each family member. For example, keychains are made for mom and dad bigger size, and for children less. Each of them will have its place and will no longer be lost.

One more interesting solution there will be a key holder made of a small block. To work you will need:

  • block 25×8×3 cm;
  • end a circular saw or jigsaw;
  • a vice or stand in which you can maintain an angle of 45°;
  • metal or wooden blanks.

Wood can be processed well using a sander or other device. The corners can be rounded a little, but you shouldn’t overdo it, because... the product will lose its appearance. Then, every 5–7 cm, transverse marks are made with lines. Using these marks, cuts are made at 45°. They must be to the middle, otherwise the structure will simply lose its strength. The block is fixed to the wall so that the slot goes down. For each bunch of keys, a small metal or wooden keychain is made. It can be anything in shape, but its thickness must match the width of the cut. When the keys are no longer needed, the key fob is simply inserted into the slot.

You can refuse keychains. Then the slots can be made of such a size that one of the keys can fit through them. All you have to do is insert it into place and you're done. The slots do not have to be at an angle. It is possible to position them completely horizontally.

Another interesting option would be to use small furniture locks. They can be purchased at any specialty store. Their number should correspond to the number of family members. Additionally you will need:

  • wooden block;
  • feather drills;
  • screwdriver;
  • sandpaper or sanding machine.

The timber should be of such thickness that the inside of the castle can fit completely into it and not peek out. Spade drills will be needed in two sizes. The first should correspond to the diameter of the core, and the second to the diameter of the clamping nut. The wood is processed as desired to the shape and configuration final product matched existing elements in the house. Marking is being carried out. In this case, it is necessary to take into account the width of the facing ring. Feather drill smaller diameter a hole is drilled from the front side. The castle is being tried on. Using a tape measure, measure the length of the thread for the nut. On the reverse side, to a depth slightly less than the length of the thread, a hole is drilled with a large drill. This is necessary to recess the fastener. The structure is fixed to the wall. Each keyhole is signed or highlighted in a specific color.

An original solution could be to use the decoupage technique. At its core, it is a process of decoration various surfaces the pattern or picture you like. To carry out the entire operation you will need:

  • any wooden blank;
  • a napkin or rice card with a pattern you like;
  • PVA glue;
  • acrylic lacquer;
  • acrylic white paint.

The surface is well cleaned and polished. Next, prepare the background for applying the desired image. To do this, the front side is painted with a white composition. After the first layer has dried, you need to apply another one. This way you can hide all the imperfections. The required area is torn out of a napkin or rice card. Or the edges are simply cut off so that they are not evenly cut, because it will not look as attractive. The drawing is placed in the middle of the prepared surface. PVA glue is applied with a large brush. You should start from the middle and move towards the edges. It is in this case that you will be able to smooth the paper well and also remove all air bubbles. The glue needs to set and dry. If the edges are left empty, then they can be decorated. A coloring composition is selected to match the overall picture. A small piece of foam sponge is cut off and clamped into a clothespin. The device is dipped in pigment, the excess is removed and blotted in the gaps where there is no lining. The final touch will be a protective varnish. It is applied in two layers. To make it easier to see bald spots, just turn the plane towards the light. After drying, you will need to go over it with fine sandpaper to smooth out any imperfections. Hooks are selected as desired.

In addition to open options, you can make a secret one, which will be hidden behind a picture or other decorative element. To work you will need a small wooden box. You can take any cigar box, cream, or an old box that is no longer used for its intended purpose. On top part the lid is mounted on a frame with some kind of beautiful picture. A recess is made in the wall. If it is drywall, then it will be enough to cut it to the required size. In case of concrete wall you'll have to tinker a little. The outline is cut out using a grinder with a diamond wheel, and the rest is knocked down with a hammer drill. The main compartment is placed in the middle and secured with self-tapping screws and dowels to the wall or spacer mechanisms to the drywall and sheathing. For the main lid, you will have to select hinges that would allow it to open together with the picture frame. Hooks are made inside. If you don’t show it to anyone, it will be difficult to guess that there is something hidden behind the drawing or photo.

If there are children in the house who like to play Lego constructor, then some parts of it can be used to secure keys. A single strip or small module is perfect for this. It must be glued or screwed to the wall. A small brick will be used as a keychain. There are ready-made elements in which holes have already been made. If they are missing, they can be easily drilled or melted with a hot awl or nail. When you need to leave the keys, you need to attach the part to the board.

A variation on the Lego theme will be the use of men from this constructor. You should proceed as described above, but it is better to glue the figures to the bar. You will also have to firmly fix your hands. The ring is inserted into the palm or simply hung on the forearm. It looks nice - it looks like the designer is asking you not to forget your house keys.

A convenient and unobtrusive option would be a unique design that will allow you to hang your keys without even looking. To implement the idea you will need a metal magnetic plate. These are usually used for knives in the kitchen. You just need to choose a convenient place near the exit, screw it to the wall and use it. The more keys that are not made of non-ferrous metals, the more securely the bunch will hold.

Don't limit yourself in terms of materials used. For example, do not buy ready-made hooks. If there are unwanted keys from an old castle or apartment left in the house, then the holes in them are perfect for fastening them to a surface with a self-tapping screw, and the bent ends will be used for hanging. Forks can be used for the same purposes. In aluminum products, the teeth are bent in such a way as to create a greeting gesture with two raised fingers or branches of climbing plants. Small wooden knots glued to the base will also act as holders.

A beautiful solution that will suit almost any interior is the use of beads or wooden balls. To complete the work you will need:

  • balls of various sizes according to the number of ligaments;
  • small wooden block;
  • strong thread or chain.

Made in balls through holes. A rope or chain is threaded through the holes. One end of it is fixed with a smaller bead or a beautiful knot. The second part is attached to the ring. Transverse slots are made in the treated block and it is fixed to the wall. In order to hang the product, you just need to thread the thread through the slot; the balls will prevent the bundles from falling out.

You can complement any key holder with a small drawer that will serve as an organizer. You can buy it at a store that sells household items. Often their purpose is to store clothespins. It is also easily assembled from small strips of plywood. This product will be an excellent accessory for a mobile phone or glasses.

It is much more convenient to carry things with you when they are neatly packed. A pocket key holder is not only a functional accessory, but also part of the image of its owner. It can be made with any design or with the family coat of arms and initials. You can really do all this yourself. For one of the common options you will need:

  • a flap of skin measuring 16×10.5 cm;
  • leather-colored rivets;
  • riveter;
  • blank for a key holder with carabiners;
  • scissors;
  • punch.

The key holder will look prettier if its edges are rounded. To apply markings, you can use a bottle cap, an intercom key, or something suitable. The following steps proceed in this order:

  • A blank with carabiners is applied to the intended installation location.
  • The marks from the holes are transferred to the skin.
  • A bunch of keys is placed inside and the edges are rolled up. This will allow you to try on where you need to install rivets in order for the product to close. A corresponding note is made.
  • The space under the keys is lined with the same leather. This will strengthen the back wall and prevent wear and tear.
  • Holes are made using the marked marks using a punch.
  • The workpiece is fixed with rivets, and then the rivets are attached to the lapels.

An additional highlight will be a stitch of contrasting thread, which can be done with a slight indentation from the edge.

Another option can be made using the multitool principle. In order to determine which specific piece of leather is needed, you need to collect all the keys into one bunch and fasten them with something. You will need to place them on the material and make width marks with a margin of a few millimeters. Next, folds are made and marks are made. One of the sides remains open, and the strap serves as a fastener. The point is that the keys will be in a case, and you can take them out like a penknife. Additional components you will need are eyelets and furniture fasteners. The latter is usually used to fasten adjacent cabinets. It is a threaded bolt that goes into the tube. Their hats are made the same way.

  • A hole is made in the places where the keys will be secured.
  • The elements are placed in place, small leather pads are placed between them so that they do not rub or ring.
  • Furniture fasteners are inserted.
  • Rivets are fixed into the strap and on one of the sides.
  • A grommet is installed at the bottom to which you can attach a keychain or something else.

Some people prefer a key holder in the shape of a wallet. To do this, a piece of leather is selected and a zipper is sewn into it. The ends are sewn up. A small braid with a ring or carabiner is attached inside. A bunch of keys hangs on it.

Desk key holder

The table key holder is often located on the dressing table. It is installed in the most visible place, so that when you enter the apartment, you can throw in the keys without looking and go about your business. In its role, you can use any small saucer or jewelry packaging. There are ready-made solutions in the form of shell-shaped products or small cabinets.

As you can see, wooden or metal key holders are an affordable solution. You can make them yourself using what you have on hand. Many of the solutions presented can be used as a basis for your own research. We are interested in what ideas you have. Share them in the comments to the article.

Video

How to make a beautiful Japanese-style wooden key holder:

Master class on making a pocket key holder:

Photo

Regularly losing keys is a reason to look for a key holder, with the help of which these important pieces of hardware in life will always be in one place and in plain sight. The easiest way is to buy a miniature “hanger” in a store, but in this case you can forget about the originality and originality of the accessory. The option with a homemade key holder is devoid of standardization and allows you to make any model quickly and cheaply.

If you don’t plan to buy a new piece of furniture, then the ideal solution would be to create yourself, with detailed instructions on how to make a beautiful key holder.

Why is it better to do it yourself?

Just look at the photos of the original key holders to understand all the advantages of making them yourself:

  • Identity. No standard forms or stamp designs.
  • Harmony. You don’t have to choose among the available options when you have the opportunity to make a key holder that fits perfectly into your home interior.
  • Cheapness. For small hooks, stores charge three times the real price, but you can easily make “your own” from scrap materials.
  • Quality. You use high-quality materials, while in stores you use fragile plastic and wood.

The variety of options is also attractive: you can make a “key keeper” from any available material. Below is everything in order.


From a cut tree

The most popular material from which a key holder can be made is wood. The easiest way to use a cut is:

  • Saw off a cut of suitable thickness (it is better to use a pine trunk).
  • Sand the surface on both sides, moving along the grain.
  • Sequentially cover the workpiece with stain in three layers, waiting for each of them to dry completely.
  • If desired, apply a design, pattern or ornament to the surface.
  • Cover with varnish.
  • Drill holes for fastenings on the back side with a drill.
  • Screw the hooks on the front side.

From the whole thread

Among the ideas on how to make a key holder, there is another part of the tree - a branch, which ideally complements the ecological style in the interior.

The main thing is to find a beautiful branch, clean, dry, file and perform several steps:

  • Cover the workpiece with stain and leave to dry for an hour.
  • Screw on the fasteners.
  • Supplement the knot hooks with several metal hooks.

From a photo frame

A stylized “screen” with keys will look no less impressive and original, for which you need:

  • Prepare a piece of plywood suitable in size for the existing frame.
  • Apply a suitable design to the board or simply cover it with plain paint.
  • Paint the frame to match.
  • Connect the parts.
  • Screw on the hooks and fasteners.

From a piece of chipboard

Any piece of wood, chipboard or plywood is an excellent basis for an original key holder. The main thing is to follow these steps:

  • Find a suitable stencil.
  • Cut out the figure.
  • Sand the contours.
  • Drill holes for hooks and hangers.
  • Supplement the product with a drawing or drawing of details.
  • Apply a final coat of varnish.

From the LEGO constructor

An interesting solution would be to decorate the hallway with children's construction sets. Step-by-step making of such key holders with your own hands looks like this:

  • Find a base: take a single plank or assemble an interesting composition from Lego.
  • Make an inscription on the base using the designer “keys”, “home”.
  • Burn holes on individual “bricks” with a hot nail.
  • Insert individual keys into the burnt hole.
  • Attach the keys in any convenient place.


Leather

If you have a square piece of leather lying around at home, then a good option would be to make a table key holder from it. This is done simply:

  • Treat the skin.
  • Secure each corner of the square with a metal rivet.
  • Add fittings that suit the style (chain, braid, studs).

There are other ideas for table key holders: varnished sea ​​shell, old casket or gift box.

Any given master class on do-it-yourself key holders is your chance to make your own “place” for constantly lost keys, ideally in harmony with the existing interior. To do this, just find a gnarled branch in the yard or slightly update the photo frame. The main thing is to turn on your imagination, find a suitable basis and be inspired by the ideas above.

DIY key holder photo

Note!

Note!

Note!

A key keeper in the house contributes not only to order, but also to the safety of property and the safety of the home. Lost keys are a threat to both, and a hook that has been empty for a long time clearly says: look for it, or do something at all. Similarly, in particularly critical industries, say, aviation, hand tool kept hanging on green or gray boards, with the outline of each item filled in red. A red spot blazes at the end of the shift - we search until we find it, right up to the complete overhaul of the car.

Exactly because of this reason the most practical wall key holder. Tabletop ones (old saucers, ashtrays, figurines/twigs with hooks), by comic definition, are designed to ensure that keys get lost exactly where they shouldn’t. Pocket key holders-cases are certainly useful, but they belong to haberdashery, and not to pieces of furniture, so in this publication we will limit ourselves to mentioning them.

It makes complete sense to make the key holder yourself. Just look at the prices for ready-made ones: 400-600 rubles. for something that you can literally create in an hour or two at home on the table and hang on the wall. It’s also good that a mini key hanger is not a critical item, not material-intensive, but for high-quality execution it requires quite subtle skills. It didn’t work out right away - no big deal, the keys will hang there for now. Once you get the hang of it, you can take on more serious things, the savings on which will no longer amount to hundreds. And the satisfaction from a job well done - of course, one could not even mention.

Types and varieties

Evolution simplified and standard designs wall key holders are shown in the photo. In the days of spring and lever locks, keys were large and often were works of decorative art. Therefore, the house key holder was most often just an overlay on the wall, as long as the metal did not spoil the finish, pos. 1. The key holder-plate has survived to this day, because aesthetically well in line with the trends of modern interior design, pos. 2.

In city apartments, where there has never been any extra usable space, a shelf key holder, pos. 3. You can make it from wood in half a day in the kitchen or on the balcony; there is room for goggle gloves. It combines with the key holder and shelf in the most natural way. She also has hidden capabilities; We’ll remember them later, so take a closer look at the poses. 3 more carefully.

A key holder for a house with services and outbuildings is, as a rule, a rather large board of the traditional type, because there will only be several sets of keys to the utility rooms, plus a gate, 1-2 gates and, possibly, a locked passage to the backyard. The hooks are marked (item 4), and the “auxiliary” key holder is placed at the back exit or in the kitchen. For key rings of family members to the front entrance, garage and car, a smaller key holder is usually hung in the hallway.

In cases where access to keys is limited to a limited number of people, key holders-cabinets are used, pos. 5. And not only in offices or in production: it is highly desirable to place a key holder-cabinet in the hallway; especially in private households: psychologists and criminologists consider keys hanging in plain view to be a strong factor that can provoke a visitor with an unstable psyche to commit illegal actions. Simply - out of harm's way.

But what then - hang a key holder somewhere with a key to the key holder, where are the keys? And somewhere else - a key holder for the key of the key holder, in which is the key to the key holder, where are the keys, and so on ad infinitum (to infinity), as in Swift’s satire? No, you just need to make a key holder with a secret lock. This does not require special knowledge, subscriptions, permissions or masterly mastery of metalworking techniques. It is enough to know that the most reliable secret is the absence of any secrets. Remember how in the film “Ivan Vasilyevich Changes His Profession,” the experienced thief and burglar Zhora Miloslavsky burst into tears while trying to open the dentist’s safe. What does this mean for home handyman, let's see at the end.

For an unreliable guest, the absence of the host's keys in sight will certainly not give a reason to break loose and do something that neither the hosts nor he himself needs. Also, of course, hiding the keys will not stop a professional thief; They have an iron principle: if you go to work, get the job done. But in this case, the thief will stay in place longer, will leave more behind, and there will be much more chances of identifying him and taking him before he “dispossesses the junk.”

Boards

Key holders-plates are the most common, because... They are convenient to make from scrap materials, incl. the smallest waste. But here, too, there are some subtleties, like any high-quality work. For example, a piece of board with a milled groove is already a seemingly ready-made key holder-shelf (item 1 in the figure), all that remains is to attach the hangers at the back and drive the screws under them into the wall. However, if there are at least two cords in such a key holder, then when removing one, it is easy to pull out the other. And according to the law of meanness, she will definitely fly into the most inaccessible nook just when time is counting down to seconds.

In a key holder-plate with oblique grooves (item 2), the cords no longer conflict with their neighbors. But, firstly, try using a hand cutter in your home workshop to select several inclined transverse grooves evenly and accurately. Secondly, if you hurriedly pull the bundle directly towards yourself, you can break its chain or even tear the key holder off the wall.

The most reliable key holder is a block with straight transverse vertical grooves, pos. 3. However, then the bundles require large keychains, which are not always comfortable in your pocket. But keychains can be replaced/supplemented with haberdashery carabiners on an extended chain, pos. 4. The carabiner is fastened to the belt loop, to the steel loop on the belt itself or the cell phone case. There’s nothing extra in your pocket, and you don’t have to worry about your keys, even if these very pockets are completely full of holes.

Framework

A type of board key holder is a frame key holder; Due to this, it looks generally more attractive. If a solid base is inserted into the frame instead of a picture, then everything is simple: we attach hooks to the board, and that’s all here, on the left in the figure. There is no need to insert the backdrop with the picture into the frame for the keys; it will soon be scratched and worn out. If the wall decoration is durable (for example, tiles, porcelain tiles or artificial stone), then the keys themselves play the role of the image. Then the hooks with threaded shanks are screwed into the top bar of the frame from the inside, in the center in Fig. Finally, you can simply screw the same hooks into the picture frame in the hallway, right there. Of course, if it is made of wood or MDF. A cast or applied molding will crumble and crack from the face already during drilling.

Organizers

Abroad, especially in English-speaking countries, key organizer holders are widespread, see fig. below. The reason, first of all, is that in countries with seemingly the most developed Internet, correspondence on paper is still intensive and mail is actively working. No one can really explain why they should cut down trees and maintain environmentally harmful production, but half a dozen outgoing/incoming envelopes are the norm for the average American. Then, here’s a proverb translated into Russian from the same place: “If the average American doesn’t cut his throat while shaving, he’ll break his neck slipping in the bathroom.” That seems to explain the reminder board.

However, the average American is not such a klutz as he is made out to be in Hollywood and in folklore. Statistics around the world show that a “reminder” board in the hallway better accustoms children to order and makes family relationships more favorable. As for the shelves, they are also suitable for gloves and glasses.

Cabinets

Key cabinets, in addition to concealed storage, are more suitable than others for installing secret locks, see at the end. The ceiling of the cabinet is a ready-made shelf, and even if there is a clock there (which is by no means superfluous in a hallway), then there remains a storage area for small items. But, due to the straightness of the forms, the design of key holders-cabinets is appropriate only in the styles of classic and rustic clones, see fig.

Houses

The house key holder is originally a type of cabinet key holder. She came out into the world, it seems, from Russia, or more precisely, from the USSR. They say that in one of the first issues of “Modelist-Constructor” there was a description of a key holder made from the body of an unusable cuckoo clock. However, from an aesthetic point of view, the upper corner of the contour gave it a number of new qualities. That craftsman hardly thought of anything like that, but the widespread use of “key houses” is not at all surprising.

Firstly, a house-shaped key holder can literally be of any design and type for a given class of furniture, the top row in Fig. If the key holder-cabinet is certainly voluminous, then the key holder-house can be flat. Secondly, the housekeeper also accepts absolutely any design and decoration, the bottom row. It does not lose its appearance even with the standard, crookedly screwed-on fittings. The only drawback is that if there is a clock in the attic, the shelf disappears. How to make a housekeeper, see master class:

Video: do-it-yourself housekeeper (master class)


If there is a box...

Perhaps in unnecessary trash there is a wooden box for cigars, luxury drinks, an expensive gift, etc. In Norway, for example, they produce sets of delicious smoked fish in wooden boxes that are more elegant than those from French or Swiss chocolate sets. In a middle-income family, it is more likely that by the time a child can be trusted with his keys, he will have outgrown the old toys and the box for them.

In all these cases, the wood of the box is of sufficient quality, and it is quite appropriate to make a key holder-cabinet from a box. However, simply screwing hooks into the back wall (or sticking pushpins with long necks) and installing hangers is not enough. In Fig. you can see where the weak point is: the door hinge. In gift boxes that are not designed for long-term use, it is made of paper or fabric and will not last long in a key holder. Therefore, the door needs to be hung on a piano or a pair of small card hinges. In addition, it is not possible to secure the lock of such a cabinet in all ways.

...or a box

Comfortable, roomy key holders or, say, toilet cabinets can also be made from drawers from old furniture. If the bottom of the box is made of fiberboard, it needs to be impregnated with a water-polymer emulsion or PVA diluted 3-5 times with water for strength and moisture resistance. The surface of a part treated in this way holds glue well and accepts varnishing and painting.

A word about plywood

You have probably already noticed that key holders are made using widespread use plywood. Amateurs sometimes create truly masterpieces from it, above in Fig. Impressive results with little effort and skill are obtained by the two-layer technique, top right: a carved shaped overlay is glued to the base and, possibly, reinforced from the inside with small self-tapping screws. It is enough to first sand the overlay with sandpaper No. 240-260, and varnish the entire product.

This, it must be said, is the rarest case in history when the development of industrial technologies contributed to the revival of a handicraft that had been withering away: artistic sawing on plywood. At furniture factories, they began cutting blank figures from sawing waste using a laser under computer control, and using a laser, if necessary, to apply strokes/contours on them, and put them on sale. The success was phenomenal, prices soared. This is where amateurs remembered how to make elegant little things from plywood at home:

  • You can sketch to complete perfection and print the outline drawing on your computer and at home.
  • In addition to carpentry jigsaws, there are also hand-held jigsaws for fine work.
  • For artistic cutting, it is quite possible at home, with your own hands, to make a vibrating tabletop jigsaw using a thin string file.
  • A hand cut will be more accurate and its small irregularities will be completely hidden if the contour drawn on the workpiece is drawn in advance on wood using an electric burner.
  • With the same electric burner you can apply strokes on plywood and draw contours no worse than with an industrial laser.
  • To make an electric burner with your own hands, you need a 3-12 V or 0-30 V power supply for a current of up to 3 A and an old burnt soldering iron.

Key for keys

For example in Fig. Shown is a drawing of a universal hanger for the hallway in the form of a key made of 15 mm plywood. To make it, you don’t need to be able to draw, and you don’t need a computer: the entire outline is made of straight lines and circular arcs. For use only as a key holder, all dimensions are proportionally reduced by 2-3 times, and the thickness of the plywood is reduced to 6-8 mm. It is possible without calculations: we remove the comma everywhere in the numbers, and you will get the dimensions in mm suitable for the key holder.

The key holder is not without intention. Capable children are often willful and freedom-loving. Valuable instructions and moralizing on the board of the key holder-organizer will only irritate them. And it’s cool to hang your keys on a key, so they’ll get used to order without being forced.

Your own, unique

Naturally, you want to see the creation of your own hands as unique. Original key holders are simpler than other items due to the reasons stated above: fundamental simplicity, low consumption of material and labor. But giving recipes for originality is nonsense. It is original because it is a unique fruit of the master’s invention. For outstanding designers, it costs a lot of training, solid experience, hard thinking, painstaking work on complex equipment and expensive materials. But is it not possible to create something original with a key holder in a hurry, without all this and without really racking your brains? Well, let’s try to give a few “tips” for your imagination.

First, the original wooden key holder-hanger is made from branches with knots. Here the material itself contributes to the uniqueness: no two plants are identical in nature. Small branches will gain strength only when they become completely lignified. Then their thickness at the butt will reach at least 4-6 mm, so the hanger will turn out to be universal, pos. 1 and 2 in Fig. The technology is simple: saw off, dry in a heated room for 3-4 weeks, cut to size, impregnate twice with a water-polymer emulsion or once with acrylic varnish diluted in half water based; this will protect the product from rotting and retain the bark, if necessary. Then we varnish or paint it and hang it where needed.

The next option for natural originality is tinder mushrooms. Especially good are those that grow on birch (item 3) and oak dead wood. The strength of the dried ones is like stone, and the durability after the processing described above is many decades.

You can also get original with purchased plywood blanks, which were discussed above. For example, for family key holders, pos. 4. There are sets on sale for families of various compositions, with keychains in the form of a car, a gate, even an outdoor toilet. All this can be decorated in your own way (see below) or at least simply covered with your own photographs. From ready-made “blind” parts you can also glue a key holder using a two-layer technique, and write out the inscriptions and strokes on the fragments with a burner, pos. 5. Just first you need to draw them with a pencil! There is a wide range of plywood blanks for home crafts on sale; here originality is achieved by a huge number of possible combinations.

Favorable preparations for originality with hangers of any kind are old tableware. Especially forks. It would seem that there is something to bend here, but in how many ways and how expressively can this be done, pos. 6-8, and the bent handle will withstand, in addition to keys, quite heavy things. The aesthetic potential of this material is so great that there are hooks for hangers on sale, stylized as bent old forks, pos. 9.

Decor and finishing

On authentic original design The housekeeper will need more labor and skill. But the limitations of imagination by the source material disappear. Let's look first at what is better to make the base from, and then at what to finish it off.

Plastic

For volumetric furniture decor small sizes The best material is polymer clay, or simply plastic. It comes in two types: immediately plastic and bar-like, like plasticine. Immediately plastic is sold in all colors in plastic bags and is squeezed out with a sausage through a cut corner. After drying, it becomes hard and moisture-resistant, but during mechanical processing it crumbles and is not particularly durable, therefore it is used mainly for decoration. additional elements utilitarian details, e.g. hooks Painted with suitable acrylic paint (see below), the finished modules look like solid cast ones, on the left in Fig.

Before sculpting, block plastic needs to be kneaded for a long time with effort; You may have to add 2-4 drops of vegetable oil onto the bar. Finished part bake in the oven at 120-130 degrees; when a brown crust appears, turn off the gas and, without opening the oven door, allow the stove to cool completely, only then can the part be removed.

Baked block plastic is durable; in the form of a figurine on a wire frame, it can also serve as a hook, in the center in Fig. It can be machined approximately like PVC or solid polycarbonate. It holds up well to painting and varnishing with water-based paints and varnishes, firmly sticks to PVA wood, on the right in Fig.

Decoupage

The most common decor for small pieces of furniture is decoupage: applying a finished design to a prepared surface, then removing the protective film from it and fixing the image with varnish. Decoupage can be direct or reverse. When direct, the surface is primed with a special primer, decoupage glue is applied to it and a picture is applied. Reverse decoupage is a well-known decal. In general, decoupage is a vast area of ​​applied art with many varieties; Video tutorials on decoupage for beginners, see below:

Video: decoupage master class for beginners


For decorating furniture, direct decoupage is mainly used, because... If the opposite is true, it is very difficult to avoid wrinkles on an area of ​​more than about the palm of your hand. Decoupage 3D is sometimes also called molded bas-reliefs made of foam plastic; with this technique it is possible to achieve greater subtlety of outline and shades than with polymer clay, see video:

Video: volumetric decoupage, decorating a key holder

Finishing

The finished key holder needs to be painted, varnished and possibly aged. Water-based acrylic paints are now most commonly used for painting; Complete drying time approx. 5 o'clock They are sold in tubes in art stores and Skillful Hands stores. Often in construction: there is considerable demand for ready-to-use paints in small packaging among finishers.

Color spectrum acrylic paints such that minerals have never even dreamed of: in addition to all the colors of the spectrum, multi-colored metallics, with simple gloss and sparkles, antique gold, red gold, polished and blackened silver, nickel, chrome, etc. Mix acrylic paints, in contrast to oil paints on mineral pigments , you can do whatever you want.

The layer of acrylic paints is thin, durable, and elastic. This makes it possible to use two- or multi-layer painting to age the surface or, for example, to decorate in the Provence style by wiping the top layer(s). Rubbing is done either on not completely dry paint with a dry, hard brush, or on dried paint with an abrasive. The first method gives a smoother texture and smoother color transitions, but requires more experience and skill. Almost equivalent results can be achieved by dry rubbing with an abrasive sponge instead of sandpaper (sold in construction and art stores).

Among the coatings of acrylic painted surfaces, the following should be noted:


You should dwell on the crackle technique (crack, craqueling). Crackle is an ancient, highly developed technology and there are many types of crackle varnishes. At pos. 1-3 fig. presented as an example only individual species crackled surface. The type of crackle retinization created by this varnish is indicated on its label, in the packaging, pos. 4, or, for expensive high-quality varnishes, on a separate liner coated with varnish from this particular bubble.

Secondly, craquelure varnishes come in one- and two-step types. Two-step ones are opaque and are designed for aging plain surfaces. One-step varnishes, except for the crackle type, must first be selected according to the general parameters indicated in their specifications. For decoupage on objects the size of a key holder, the following are preferred:

  • Medium – the mesh size of the craquelure mesh is medium.
  • Thin or Hairline – thin (hairline) cracks.
  • Sharp – the edges of the cracks are sharp and the corners of the mesh are sharp.

What a picture the size of a book looks like, crackled with varnish with such properties, is shown in pos. 6. And at pos. 5 and 7 for comparison – images of a similar nature, processed with varnishes with different characteristics.

Secret key holders

So we got to the key holders with a secret. The first, the mechanism of which is shown in pos. 1 Fig., is well known to intruders, but will not tempt an unbalanced guest. She disguises herself as a picture on the wall, pos. 2. The door is hung on the left on hidden spring-loaded hinges. When you press the secret bar in the place indicated by the red arrow, the tongue of the bolt will come out of the holder and the door will swing open. Just like a dentist’s safe in front of the nose of a completely tired Zhorik Miloslavsky.

Bevels on the secret bar of 1.5-2 mm are necessary so that it does not jam when pressed. The crossbar is made either from sheet steel with a thickness of 1.5-2 mm, pos. 5a, or bent from strong elastic wire of the same thickness, for example. bicycle spoke, pos. 5 B. The cage is steel of the same thickness. The clamps holding the spring are installed with a play of approx. 0.3-0.5 mm.

Skilled craftsmen achieve precise balance of the secret bar with just one spring, but without experience, you will have to tinker a lot with adjusting the mechanism. It is better for a beginner to place between the bar and back wall The drawer has a weak ball latch so that the spring snaps it in reverse.

Hidden lock, the diagram of which is shown in pos. 4, already more cunning. Look again at the key holder-shelf, fig. at first. Imagine that the keys are covered there with a door in the form of an organizer shelf, pos. 3, quite necessary and useful. On the left it is hung, as in the previous one. case, but the mechanism is hidden in the right drawer. And a strong magnet, ferrite or niobium, is built into the bottom of the tray. We moved the tray to the right - the magnet lifted the load, the tongues released the clips, and the door swung open. To close it, you need to push the tray back, otherwise the latch will not latch.

This device also has something invisible in Fig. secret: the cross-section of the load is not round, but oblong, just like the slot for it in the top bar of the box. This will prevent the rod from turning with the crossbars. You can also, if the crossbars are wire, lengthen their fingers coming out of the rod and select a groove from the inside in the outer wall of the mechanism in which they will move.

Sections