When the question arises: what to give Mom and do it yourself? Take a closer look at the Flower Vase, original product, moreover, cut out of plywood with your own hands, will serve a great gift and will delight your loved ones. The work is of medium difficulty, follow the instructions, be consistent and you will succeed.

This work belongs to Lyudmila Pelymskaya, a German language teacher who dedicated for a long time such a hobby as artistic cutting with a jigsaw.

In order to make such a Vase with your own hands, you will need the following tools:

Preparation of the workplace

As usual, the first thing you need to do is equip your workplace on which you will work. The rules are not complicated: there should be no unnecessary things on the table, all the tools should be in their place and at hand. Not everyone has their own desktop, and you’ve probably already thought about creating one. Making a table is not difficult, but choosing a place for it in the house is more difficult. A good option- this is an insulated balcony on which you can start working on your craft at any time. If you have a specially equipped room with a workbench, then you are lucky. In a separate article you can read about where I tried to describe in as much detail as possible the entire process of its creation. After you have completed the process of creating a workplace, you can proceed directly to your future craft.

Plywood selection

The main elements will fit on A4 plywood, since some parts need to be made in several copies, you will need several blanks. The thickness of the plywood should be from 2.5 to 3 mm, and depending on the thickness, sawing should be done along the internal or external contour, this is important for the grooves into which the elements of the craft are inserted. Before transferring the drawing to plywood, sand the workpiece with coarse sandpaper and then with fine sandpaper. Wrap wooden block sandpaper and then start sanding. Sand the prepared plywood along the layers, not across. A well-polished surface should be flat, completely smooth, glossy-matte in the light and silky to the touch. Pay attention to grain placement, knots, dents and other imperfections. Quality and color. If the plywood is not of very high quality and delaminates when sawing, read the recommendations for elimination.

Transferring the design to plywood

You need to translate the drawing accurately and carefully: secure the drawing using buttons, double-sided masking tape, or simply hold it with your left hand. Check if the drawing fits the dimensions. Arrange the individual parts so that you can use the plywood sheet as economically as possible. There is no need to rush, because your future craft depends on the drawing. If time is short, then to speed up the translation process you can use the technique of quickly translating a drawing; for this, I suggest you read the article in the tips section:.

Cutting out a vase from plywood with a jigsaw

There are many rules for cutting, but you need to rely on the most common ones. First you should cut out the internal elements and then start cutting out the outline. There is no need to rush when cutting. The main thing is to always keep it straight at a 90 degree angle when cutting. Saw out the parts along precisely marked lines. The movements of the jigsaw should always be smooth up and down. Also, do not forget to monitor your posture. Try to avoid bevels and unevenness. If you go off the line while cutting, don’t worry. Such bevels and irregularities can later be removed using a flat file or “coarse-grained” sandpaper.

Rest

Fatigue occurs when sawing. Fingers and eyes, which are always tense, often get tired. When working, of course, everyone gets tired, but in order to reduce the load, do a couple of exercises. You can watch the exercises. Do this several times as you work.

Assembling a vase from plywood

The assembly of the Vase parts in this work is simple. When assembling, refer to the drawing. If some parts are not included in the required parts, file them down. When the craft is assembled without problems, glue it together. The dish must be glued using PVA or titan glue. You don't need to pour a lot of glue.

Varnishing crafts

If desired, the dish can be varnished with stain to resemble valuable types of wood, or simply transparent; this is not necessary, but it will add greater individuality to your craft. Try to choose a good and high-quality varnish. do it with a special brush, take your time. Try not to leave any visible streaks of bubbles or lint from the brush.

Plywood vase

For work you will need: jigsaw, files, sawing machine, sandpaper, drill or saw, pliers, wire cutters, screwdriver, hammer, BF-2 or wood glue, compass, ruler, pencil, copy paper, buttons, plywood 4 mm thick, round stick with a diameter of 14 - 18 mm, thin cord, some small nails and screws, Oil paint, colorless la To, a sharp knife or scissors and burning machine.

First transfer the development of parts through carbon paper to plywood, while not forgetting about the economical use of material. Draw straight lines with a ruler, round ones with a compass. In the drawings, the centers of the circles are marked with dots, and their radii with arrows.

It is very important to consider in which direction the fibers of the top layer of plywood will be located on the parts! When sawing on edges with outside There should be a thin trace of the pencil line. Thoroughly clean the edges of the parts with a file, and hard-to-reach places with a needle file. The tenons must fit tightly into the grooves of the mating parts. Finally, thoroughly sand all surfaces with sandpaper.

Carry out preliminary (without glue) assembly of the products: you need to make sure that everything is done correctly. Only after this, lubricate the parts with glue and connect. Don't forget to remove any spilled droplets.

Queue for painting. If you decorated the parts with an ornament using a burning apparatus, then it is better to cover them with colorless varnish in 2 - 3 layers. And those without decoration, first paint them with oil or aniline paints, and then with varnish.

WALL VASE. cut out parts 1 - 10. Glue parts 2 - 9 into the grooves and slots of part 1. Insert a clean mustard jar into the resulting cavity. The bottom of the jar should rest on part 7. Drive a nail into the wall from the underside of part 10. Use wire cutters to bite off the cap so that the remaining stem protrudes 8 mm. Insert this part with a groove (without glue) into part 1 so that you can periodically remove the jar. The vase is assembled. Hang it on the wall using the hole in the top of part 2.

HANGING VASE. Cut out parts 11 - 14. Glue part 12 into one of the grooves of part 11. Take a clean jar with a capacity of 0.33 liters and put it on it top part part 13, and place the bottom of the jar on part 11. Then glue the upper part of part 12 with grooves into part 13. Insert the remaining parts 12 and all parts 14 with glue. The vase is assembled. After final processing, the vase with flowers can be hung by the “ears” on three strings in a bookshelf.

If your new hobby is sawing out various decorative elements, burning or carving wood, then our advice would be to start with a material such as plywood.

There are several significant reasons for this:

Plywood is quite easy to work with.

If it's in your hands good tool, and you'll start with the figures small size, then making them will only take you a couple of hours.

The material is universal in use, so you can make literally anything you want from it: furniture, toys, small elements decor.

All this can be a wonderful addition to the interior of your home.

Features of working with the material

What is a plywood sheet? It consists of several sheets of veneer, which are connected to each other using glue.

Important: plywood can be different types: based on beech, birch, pine.

Not only the quality depends on which sheet you choose. finished product, but even its structure and color.

If you are going to cut out various figures using a jigsaw, then you need to choose the highest quality types of plywood.

They are particularly durable, which guarantees that the plywood will not crack, ruining the entire appearance products at the most unpredictable moment.

If you are going to start working immediately, immediately on the day of purchase, then choose only dry sheets of wood.

They won't break the jigsaw blade every 10 minutes.

To work with plywood, you will need to acquire a number of tools.

In principle, they are always the same for all types of products, so you only need a one-time investment:

• Jigsaw
• Jigsaw files
• Hand or electric drill
• Ruler
• Grinding machine
• Burner.

Framework

If you want to beautifully decorate your home or give it to someone close to you original gift, make your own plywood frame.

The preparation process will not take you much time, because you just need to get the necessary materials.

Note!

They are standard for all cases, and we have already mentioned them before.

We will offer you master classes on light crafts made from plywood. You can make either a regular straight frame or plan various patterns and figures on it.

First you need to make a template, and after that you can cut it out, trace the contours with a pencil on the plywood and begin the manufacturing process.

This stage is not only the most responsible, but also the most exciting. If you put a piece of your soul into your work, everything will definitely work out. Ready design must be opened with varnish. Ready!

Doll furniture

This task will be a real test for parents.

Note!

The so-called test of acquired design skills.

Feature of creation doll furniture is that children do not tolerate falsehood at all.

If they see that the furniture is not worked out in detail, but instead kitchen stove If you brought an ordinary rectangular block for your favorite doll, then you simply cannot avoid serious insults and childhood disappointments.

The second feature of making such a craft from plywood using a jigsaw is that all this furniture must be carefully worked out with sandpaper or a grinding machine.

Your child will constantly come into contact with these self-made toys, and if the edges are poorly processed, they may get hurt.

Note!

Well, the last feature of crafts made from plywood and the house is that the materials for such furniture must be absolutely non-toxic and normal for constant contact with the child, because he can drag it into his mouth or take it to bed with him.

This is not a simple applique or paper craft, so you need to take the matter seriously, following a whole list of actions that need to be completed.

Carrying out work from plywood

How simple furniture is made in detail, and then assembled into one piece of furniture, so do-it-yourself plywood crafts should be done separately.

To do this, first of all, prepare special drawings of plywood crafts, on which you will specify the dimensions of all parts and their fastenings.

Take a ready-made plywood sheet and attach a paper part template to it.

Trace the part with a pencil and plan out the outline with a jigsaw.

After this, each part must be cleaned with sandpaper or a grinding machine and only then the piece of furniture must be assembled.

When you are done with the entire set, open it with varnish.

Below are provided different variants and photos of plywood crafts. Choose the one you like.

Photos of plywood crafts

Description drawings of a plywood vase

Craft drawing Small vase for cookies - Plywood vase in the shape of a sports cup, drawings and tips. Vases Plywood Products cutting out with a jigsaw Burning carving! The difficulty in choosing plywood lies in the Posted in: Interior items, Drawings. The approach and structure of the vase have been radically changed. To cut out you need to have a piece of plywood drawings. For work you will need: a jigsaw, files, a sawing machine. Cutting out a vase from plywood. The site contains a collection of product drawings and photos of works. Interesting ideas and cutting drawings. To make a vase you need some sheet plywood. We give you the drawings of all of them. Now do-it-yourself plywood crafts. DIY plywood staircase drawings. Glass vases are held by cupids and voluptuous ones. The site contains a collection of product drawings and photos of works. DIY plywood box: making. Drawings for cutting out boxes and animals from plywood with a jigsaw: video - memo. Can i complete drawing vases in jpg format. On plywood trim Literature on cutting out plywood with a jigsaw. Out of four existing types plywood, only the first one is suitable, at least the second one. Homemade wooden fruit vase, made by hand, master class, drawings. Most books contain sketches and drawings for cutting with detailed description. Vases made of plywood drawings Vases made of plywood drawings Vases made of plywood drawings Vases made of plywood drawings Cutting out plywood with a jigsaw. The video shows the technique and assembly process. Drawings, drawings and descriptions of chandeliers, sconces and lamps made of plywood. Drawings, drawings and descriptions of plywood products for sawing. A jigsaw gives you the chance to make various internal holes. On this page you will find homemade drawings and drawings. Plywood thickness Large selection of books and magazines on jigsaw cutting from plywood. DIY plywood crafts with a jigsaw drawings. Cutting from plywood with a jigsaw: a set of tools, materials, drawings and cutting technology Image result for crafts from plywood drawings. Sami Frame Cabin Wood Projects Vases. Drawings, drawings and descriptions of plywood products and homemade products. A similar drawing of this work is presented in the drawings section; boxes, plywood vases, corners. Drawings of Boxes for Cutting Out of Plywood with a Jigsaw Download Free. Sawing out of plywood with a jigsaw drawings Sawing out with a jigsaw from. The drawings have been collected large collection drawings for cutting from plywood. 1 Free jigsaw cutting plans and much more can be found exclusively at saw - man. Designed for the execution of a vase made of 4 mm plywood and a drawing for 6 mm. Literature on cutting out plywood with a jigsaw. A selection of material on the topic of plywood box drawings dxf. User publications Artistic cutting with a jigsaw. Drawings, drawings and descriptions of plywood products.

How to make it yourself artistic vase plywood

Any DIY crafts perform “four tasks”. The first is a great way to spend your free time, you can take a break from everyday annoying problems. Secondly, as a result of such “rest”, people appear in the house. beautiful products for various purposes, from small souvenirs to exclusive unique furniture. Third. Artistic sawing is an excellent way to accustom a child to work; it is a kind of fail-safe method of education. Your child will always be happy to spend time with his father doing “adult and useful activities.” Fourth - by making products with your own hands, you increase your authority in the eyes of everyone around you. And in your own, of course, which is also quite nice. In this article we offer you drawings of a vase with dragons in chinese style. It can not only diversify any holiday table, but also become its main decoration. What do you need to have for production?

Tool kit for artistic sawing

We consider it necessary to list all the tools and equipment that you will need to complete the job.

• Jigsaw. Previously, only manual jigsaw models were available to individual users. It was quite difficult to work with them; depending on the complexity, one product could take several weeks. Nowadays there are quite a few different models of jigsaws with electric drive. Such special tools not only increase labor productivity tenfold, but also improve the quality of the cut, which is very important for the final appearance of the product.
• Eclectic drill with a thin drill bit. With its help, “starting and technological” holes are sawn through plywood. In some similar patterns using a set of drills various diameters You can make line turns or round through holes.
• Tools for sanding plywood. The kit should include sandpapers of various numbers, needle files, files, and stone blocks.
• A set of devices for transferring a design onto plywood. You need to have tracing paper, pencils, knives, rulers and compasses.

That's all, the list takes up a lot of space, but most of the necessary items and tools are already in almost every home.

Transferring a drawing

To make a vase, take sanded plywood 3-4 millimeters thick; in addition, you will need high-quality transparent wood glue and transparent varnish or paints.

The drawings we provide need to be printed on a printer; select the scale you need. Then there are two ways to work with drawings.

• Using tracing paper and a pencil, carefully transfer all the lines from the print onto the plywood. This is a rather difficult and tedious task, it requires great care, and there are often various errors that can be noticed already during cutting. It can be difficult to correct such errors, sometimes it is simply impossible and you have to start all over again. And this is very, very unpleasant, instead of calming nervous system she is additionally “excited.”
• Don’t translate anything at all, but cut it out right away. To do this, you need to print as many drawings as there are elements of the product; this is not difficult to do. After this, we cut out the drawing of each part in the scale we need and use double-sided tape or glue to fix it on the plywood. We cut out the part immediately according to the paper drawing. Simple, reliable, accurate and fast. In a word, what we all like. Our fathers and grandfathers could not use this method for one reason - they were able to get only one sheet of paper, on which there were drawings of all the individual elements in the singular.

You can go another way. From our drawing, take only the principle of connecting individual parts into a single structure and dimensions, and make the ornaments yourself. It's not as difficult as you might think. Take a piece of plain paper, fold it several times and cut holes in the bends with scissors. In this way, our ancestors made christmas tree paper snowflakes. Make several variants of patterns, choose the most successful one among them and use tracing paper to transfer it onto plywood. The first cut out element will be a template, with its help it is easy to apply the outline to all other parts.

How to cut blanks for a vase

We will tell you how to cut a vase on a stationary electric jigsaw. Technology hand sawing It’s not much different, so we won’t talk about it separately.

• Before starting sawing, you need to drill small holes in each “blind” section of the ornament; the diameter of the hole should ensure the unhindered entry of the nail file.
• The plywood should be guided smoothly along the lines, do not make sudden jerks and it is highly advisable not to stop. We strongly recommend that you check the plywood for the quality of the cut, because a lot depends on its grade and your professional skills.
• The file should always be in a vertical position, do not allow it to bend or twist.
• If you need to make a very sharp turn of the saw, it is better to make the cut in several steps. Turn it little by little several times almost idle and thus cut out sharp turns of the pattern.
• Always start cutting from the middle of the pattern, this will eliminate the risk of the plywood cracking in very thin places along the edges. Cracking of plywood is always an unpleasant phenomenon, and in some cases it is necessary to redo the part. This applies to situations where in these places it is necessary to connect several parts into one structure.
• Work in good lighting; while working, nothing should prevent you from moving the plywood freely and moving yourself.

Assembling the vase

Before assembly, all cut areas must be carefully sanded. Where possible - use sandpaper Where not possible, work with flat or round files. The surfaces must be coated with two layers of varnish; varnishing should be done in the usual way, following the technology. Almost all connections are made according to the tenon-groove principle, select the sizes of the tenons and grooves taking into account the thickness of the plywood, the tenon should fit into the groove with little effort, the height of the tenon should be exactly equal to the thickness of the plywood. The same rule applies to parts that are connected into a lock. Be sure to use clear wood glue.

540 rub.