How to make a New Year's chandelier with your own hands. Beautiful handmade shades for chandeliers: step-by-step master class (photo)

home

Scud

People who have developed creative abilities very often create interior elements with their own hands, and making a master class chandelier is not difficult. Only it is better to buy factory-made lamps for the bathroom, because they must be small and reliable.

Dwellings containing objects self made, acquire a refined and original look.

We make a chandelier with our own hands from plastic bottles

To make a chandelier from plastic bottles we take:

If you have an old chandelier, you can take its island
Many colorful bottles
No more than ten steel rods

From plastic bottles we use scissors to cut out any figures that you want to see on your chandelier (animals, flowers, etc.)
We attach several twigs to the chandelier island. From the rest we make something similar to a hedgehog, connecting the rods in the middle. We remove one rod where the light bulb will be
Next, we supplement the resulting frame with previously cut plastic figures.
We connect the island and the hedgehog together.

Now you know how to make a plastic chandelier with your own hands. To consolidate the material, we recommend that you watch a video that contains examples of chandeliers made from plastic bottles:

Making a chandelier with your own hands from wood

To make a wooden chandelier we will need:

Twelve strips for door trim, 30-45 cm each.
Liter jars from which we will make lampshades (6 pieces).
White and wood-colored paint.
Self-tapping screws for wood.
Sandpaper.
Seaming machine.

Description of the manufacturing principle.

Making the planks smooth using sandpaper
We need room for the electrical wire, so we make a notch on the back of each strip.
We drill three strips to which we will attach the shades.
We paint the planks a wood color.
We make a regular hexagon from the plans.
We attach the cartridge to the hole in the lid.
We roll up the jars with light bulbs inside.
We paint the lampshade in any light color.

DIY chandelier made of wood, photo below:

Making a chandelier with your own hands from threads

To make a chandelier from nylon threads we take:

Let's make a lampshade from a plastic bowl
Multi-colored threads
Fastening paste

Description of the manufacturing principle.

First of all, let's make the paste. Mix half a glass of flour and two glasses of water, two glasses of water with a temperature above 60 degrees, boil and throw in about three tablespoons of sugar. Stir and wait until it cools down. Next, we’ll look at how to make a lampshade with your own hands for a chandelier.
Throw the yarn into the paste.
We wind the resulting yarn around a bowl.
After 24 hours, separate the resulting thread lampshade from the bowl.
We attach the lampshade to the bottom and that’s it, the chandelier can be hung on the ceiling

Attention! A DIY lampshade for a chandelier requires the use of a light bulb of no more than 60W, as it is made of flammable materials.

Have you decided to change your interior and want something unusual? The store offers a huge selection of different things, but why not make something yourself? The designer lives in each of us, you just need to wake him up, change the world that surrounds you, make it the way you see it!

Why not start with a chandelier? She might become business card your home, which no one else has. This will not only save your money but also give you a sea of unforgettable emotions.

Make a chandelier shade with your own hands. You will be surprised that things that you were ready to throw away can be useful to you and reborn in your new invention.

First you need to decide on the style of what kind of chandelier you want.

If you are young - a romantic style chandelier is for you, you need to decorate country house– country style will be just right.

DIY chandelier (photo based on lampshade decorations)

To make a chandelier with our own hands, we take:

Light bulb socket.
Power cord.
Frame for a chandelier.
Decor for jewelry.
Multi-colored threads.
Hot glue.
60 Watt light bulb.

For the frame, what's left of your old, long-forgotten chandelier is suitable. Many famous designers began their illustrious careers by giving old items a shine, bringing them back to life and putting them up for sale.

Take measurements and decide on the fabric you will use. Sewing the cover the right size put on the frame. You can decorate the lampshade however you like. These can be cut out flowers, animals, figures, beads and much more that your imagination can reproduce. We attach a socket equipped with a low-power light bulb to the lampshade and everything is ready. A lampshade made by yourself will lift your spirits every time you look at it.

Making a New Year's chandelier with your own hands

How to make a New Year's chandelier with your own hands to surprise your friends with your suddenly discovered talent?

To make a chandelier we take:

Organic glass or thin wooden sheet.
Linen rope.
Multi-colored balls.
Small stapler.
We use glass parts left over from an old chandelier.

Description of the manufacturing principle.

We start by cutting a square from plexiglass, the dimensions of which are 50:50 cm. We make holes every 5 centimeters throughout the entire area, as chaotically as possible. We take a linen thread and thread it through the water hole and out into another, adjacent one. The length of the extended ends should be two meters. We repeat this procedure until we fill all the holes in the square.

We hang this composition instead of a chandelier on the ceiling and continue to decorate the chandelier as christmas tree. We take the balls and tie nylon threads of different lengths to them, and tie them to the structure, concentrating them in the central part. Next we perform the same operation with glass products, but we hang them already at the edges, the length of the thread should be less than on the balls. If you look at the structure as a whole, it will look like an inverted pyramid.

Now you know how to make a New Year's chandelier with your own hands. Start your crafts right now and you won't stop with the chandelier.

Recently, chandelier decorations such as thread wrapping have become very fashionable.

Description of the manufacturing principle.

We will need a lot of thread and PVA glue, as well as an inflatable ball. Cotton threads are perfect for our project, since the glue applies evenly to them and behaves obediently.

Wrapping inflated balloon threads, apply glue and wait until it dries. Then we simply pop the ball with a needle. Cut a hole on top for the light bulb and you're done. Your result can be compared with the DIY chandelier in the photo.

IN in this example The thread can be completely replaced with lace and you will get a good kitchen lamp.

Instead of a ball, you can use other shapes, such as a juice bag. Choose a sconce online that you like and use the appropriate mold.

Another way in which you can make a wonderful chandelier with your own hands from improvised materials.

If you happen to have embroidery hoops lying around at home, don’t miss out on the opportunity to make a great lamp out of them. The basis here will be the hoop and wire, they will give your lamp the shape you want. You can stretch fabric over the frame or use a hanger. An unobtrusive New Year's garland can serve great decoration, if you attach it to inside lamp If you make not one such lamp, but several, then in combination they can give your bedroom a completely new and fresh look.

Budget option for chandeliers from plastic cups. A fishing line and a stapler work wonders, you can see how it will look in the photo.

Do you dream of adding brightness to the nursery or refreshing your workplace in the house? Or maybe you are a lover of the East, where the fashion for these such delicate little things came to us from? Then you should definitely read how to make a lamp out of paper with your own hands - unusual, original little things will instantly add a bit of magic to any corner of the house!

We guarantee that your guests will be asking for a long time where you bought this designer lamp, and having learned that you made it yourself, they will ask you to tell you how to make a paper chandelier with your own hands and its step-by-step instructions.

In this master class we will show you four ways to make a lamp out of paper, look and choose the option that’s right for you.

To create this delicate lamp, prepare:

Colored paper of any color;
PVA glue or glue stick;
Paper clips;
Compass;
Scissors;
Fishing line;
Colored yarn;
LED lamp ( );
Wire with switch.

Step-by-step instruction:

Step 1

Using a compass, draw semicircles 1 cm wide on a colored sheet of paper.
With each line we increase the diameter of the semicircle.
Please note that you will need quite a lot of sheets. Then cut out semicircular strips and cut them into pieces of 2-5 cm.

Step 2

Roll and glue the resulting strips, making one side larger than the other - this will make it easy to glue them together into a dome-shaped shape. After that, you can connect them with glue in pieces of five.
Glue the clusters together, strengthening them with paper clips until the glue dries. Glue until you have a circle, with a small hole for a lamp.

Of course, you can fantasize, and your lamp will be a little different than ours.

Step 3

Now, while our glue is finally drying, let's decorate our wire. To do this, take yarn of any color you like and carefully begin to rewind the wire with it. Try not to leave any uneven spots when wrapping the yarn over the previous layer.

You can add a drop of glue to the end of the yarn to strengthen it.

Step 4

Let's make a holder for an LED lamp. To do this, we tie a fishing line on three sides (it is advisable to measure the distance evenly) to our glued strips, and the other ends to a paper clip, which we first straighten to the shape of a triangle.

All! All that remains is to place the lamp in the circle and screw it to the wire. You can hang such a lamp either separately or in combination with, for example, .

Master class No. 2: Chandelier made of rice or parchment paper

We present to your attention new master class, where we will teach you how to make lamps from rice paper. There is nothing complicated in making it, as it might seem at first glance, and you can involve all household members in this exciting activity. The designer lamp is suitable for both the nursery and your bedroom.

Instead of rice paper, you can buy a roll of parchment paper for baking

So, to make a lamp you will need:

Unnecessary lampshade;
Thin wire;
Several rolls of rice paper;
Iron;
Paper cutter;
Sewing machine.

Self-production

Step 1

Take a lampshade you don't need (you can buy inexpensive new) and remove everything from it, leaving only the base. If your lampshade is similar to ours, then add a wire in the middle, securing it well.

Step 2

Prepare the parchment paper by unrolling the rolls and cutting them into roughly equal rectangles.
Iron the sheets until they become completely even and smooth.
Fold each sheet like an accordion, measuring equal distances of strips, and use a paper cutter to cut equal, even circles.
Try to use the cutter more carefully and don't leave a lot of extra paper– you will need a lot of circles.

Step 3

Connect all the circles together by stitching in the middle. Make connected circles of equal length and begin to strengthen them around the circle of the lampshade.
Once you complete the first circle, go around the subsequent ones, decreasing the length each time.
Carefully secure your lamp in the desired location, straightening all the threads.

Remember to only use LED bulbs, to avoid fire.

This beautiful chandelier is the result of painstaking work, after completion of which you will admire your work and be proud of yourself for a long time. On our website you will find many more ways to diversify your home lighting, For example:

you can or .
, for lovers of modernism.
Or for lovers of eco-style.

You can also at your discretion, paint the rice paper circles in any shade, based color range rooms. If you want to hang this lamp in a child's room, you can add, for example, glass angels on long gold threads - again, choose the right accessories for different rooms, this will add warmth and originality.

WARNING: Be aware that incandescent lamps produce very hot temperatures and may cause paper to ignite. For paper lamps and fixtures, use only LED lamps.

Master class No. 3: Origami chandelier made of paper

This beautiful bright lamp really resembles a ripe berry!

To make it, take the following:

2 paper bags, so that when gluing you get a one and a half meter bag (preferably with an interesting print);
LED lamp (never an incandescent lamp );
Wire with switch;

As soon as you decide that training is no longer necessary, we begin preparing the paper bag. Remove the handles and cut the bottoms off the bags and glue them together to make one large paper bag.

Fold the resulting bag in half, and then fold the halves like an accordion so that you get 16 identical folded strips. Then fold the two outer strips diagonally.

Follow the simple diagrams and you will get wonderful lamps to decorate your home. You may have to practice a little to fold origami perfectly, but you won’t regret it, because origami is the whole world a variety of interesting hand-made items. And your children will simply be amazed by your skillful hands!

Master class No. 4: Corrugated paper lamp

To make unusual lamp you will need:

Corrugated paper 88×44cm;
Ruler;
Spoke;
Glue;
A thread;
Cable;
LED lamp ( never an incandescent lamp ).

Step 1

Using a ruler, mark a sheet of paper at equal intervals and fold like an accordion according to the markings.
Helping yourself with a knitting needle, fold the folded sheet of paper diagonally, first on one side, and then unfold it on the other side.
Unfold the sheet - you should have it double sheet marked with diamonds.

Step 2

Connect the marked lines according to the photograph; it is advisable that the sheet is not very wrinkled at this time - otherwise the appearance of the lamp will be spoiled.
All that remains is to connect the top of the lamp with a thread so that it does not fall apart, and secure the cable with the LED lamp.

Be safe - do not use regular incandescent lamps, they heat up the paper and it may catch fire.

Paper butterfly chandeliers

The most popular paper chandelier is the butterfly chandelier. And such love for this product is not just:

Firstly she looks very chic and expensive.
And secondly The production is very simple, even a child can be involved.

Such an elegant lamp will go well with any interior style, and it is also appropriate in the living room or dining room and even in a children's room.

Manufacturing technique:

The basis is an old chandelier or its frame. If this is not the case, then you can take a regular metal or wooden rim. If there is no such thing, take a thick wire and make 2-3 coils of yourself, so that you get a circle.
Cut out butterflies according to the template (butterfly template below)
We take a nylon thread or fishing line and attach butterflies to it. There can be two types of fastenings: either we pierce the butterflies or we put them on silicone glue. Whichever is more convenient for someone.

Butterfly pattern

To make a chandelier with butterflies, simply take a template and scale it to your size. It looks very nice if you make butterflies of several sizes, for example 3-4 diameters. Using a pencil, draw the sketch on paper and cut it out.

It is best to cut with stationeryknife or straight manicure scissors without curves.
It's better to use paper more dense and which does not attract dust, for example velvet structure. Since you will have to vacuum such a chandelier often

It is also a very beautiful option if you make a ball out of wire, take an old pendant from a chandelier as a basis and place several butterflies using a glue gun.

Paper ball chandelier

The basis for such chandeliers is a ready-made Chinese lamp made from rice paper. They are usually very cheap, down to 1-2 dollars. But you can decorate it however you like with paper tartlets, an unnecessary map, newspaper or sheets of old books. We are publishing several ideas for decorating a ball chandelier with paper.

Paper New Year lamp

A regular idea for the New Year is to use an old lampshade and string snowflakes on a string various forms. Very impressive and beautiful. Below are a few photo ideas such decor for the new year.

To polish your skills, as well as to replenish your collection with extraordinary beautiful lamps, see more ideas and . We are sure that among them you will find many that you will definitely want to create!

2 ratings, average: 5,00 out of 5)

A chandelier in a room is not only lighting device. Without exaggeration, we can say that it is the main decoration of the room. Handmade items are considered especially valuable. This allows us to highlight the special taste of the owners of the home, as well as their extraordinary and creative mind. Of course, this type of work is quite complex and requires increased concentration. But at the same time, when creating decorations for your home, you can find many interesting and extraordinary solutions in it!

This article presents some ideas for decorating a chandelier with your own hands, as well as instructions for them. Everything is written so simply and clearly that anyone can do it at home.

In order to make a chandelier, sometimes the most unusual materials are used. For example, everyone is already familiar with glass or wood, plastic, and so on. But sometimes, when you want something completely “unusual,” wooden skewers, glass wine bottles, jars, all kinds of tree branches, cardboard, and even straw come into play. You need to choose depending on the idea of the creator and the wishes of the apartment owners. It is also necessary to take into account general interior premises where the finished product is supposed to be placed.

Interesting idea for a chandelier made from plastic spoons

Plastic spoons for disposable meals are one of the simplest and most easily available materials for creating a chandelier for a room. Their advantages are low price, a variety of colors, and such material will last quite a long time. for a long time. To create such an extraordinary chandelier, you will need a minimum of investments, both physical and material.

Materials:

empty bottle drinking water, volume 5 liters;
plastic spoons (their number depends on the size of the bottle);
glue for plastic;
an old chandelier (or rather, a socket from it);
sharpened knife.

Process of creation:

First you need to prepare a plastic bottle for subsequent steps. Remove the label in advance, cut off the bottom, dry well.
Then you need to remove the plastic spoons from the packaging and carefully cut off the unnecessary handles with a knife, leaving about 2-3 centimeters above the level of the “scoop”.
You need to glue the scoop blanks to the base of the bottle. Apply to the remaining “tail” a large number of glue and press it to the surface (with the convex side of the spoon facing out). It is necessary to cover the entire bottle in a circle until the entire perimeter is occupied by plastic “spoons”. It is advisable to arrange them in a checkerboard pattern and slightly move them together. This will leave fewer “free spots”.
You need to remove the cartridge from the old unnecessary chandelier, and then place it in an already glued and dried bottle and fix it to the frame.
A decorative bowl can also be made from plastic spoons: “scoops” are glued around the neck of the eggplant.
Install and connect the chandelier, check its operation.

Note! Possible option decorative painting or painting spoons in absolutely any color. Thus, your product will look even more beautiful and more original!

Chandelier made of plastic bottles in the form of leaves

One more an unusual option The interior will feature a chandelier in the shape of leaves. It is created from simple plastic bottles, the variety of colors of which allows you to work in the most unusual colors and embody the most daring ideas.

Process of creation:

Cut plastic bottles into blanks shaped like future leaves.
For each workpiece, the sheet shape is finally fixed.
Using a soldering iron with a thick tip and a one-sided bevel, you need to slightly fuse the sections of each leaf in order to give the future product the greatest effect.
In the same way, using a soldering iron, you need to give the workpieces a sheet structure. You need to act extremely carefully and accurately, because you can easily make a hole in the plastic. Such a leaf with outlined veins and slightly fused edges will look complete.
Using a hot needle, you need to melt several holes at the “leg” of each leaf in order to attach them.
Using thin wire, form branches and screw them to a steel wire frame.

Also great idea There will be the production of a new chandelier in the form of a lampshade for a floor lamp or a lamp for a table. Thus, it will be a great addition to the previous product!

Chandelier with paper butterflies

The most common product option is a chandelier with butterflies. And this is not without reason. Let's start with the fact that this option looks luxurious and expensive, and secondly, its production does not require any special physical costs. Thus, even a child can participate in creating a chandelier.

Process of creation:

It is based on either an old chandelier or a similar frame. If you don’t have one, then you can take the simplest wooden or metal rim. If such material is not available, then, as an option, you can take thick wire and make about 2-3 skeins, so that a circle is formed.
Cut out butterflies from paper according to the template. You need to take the butterfly template and adjust it to the desired size. The option also looks very unusual when butterflies of several sizes are located on the chandelier (again, depending on desire). Transfer the outlines onto paper and carefully cut out, preferably with a sharpened stationery knife, or small, non-rounded scissors. For the templates themselves, it is better to use a material that is dense, does not become very dirty and does not attract dust. For example, velvet paper is very poorly suited for the product, because in the future you will need to vacuum the chandelier quite often.
Take a nylon thread or transparent fishing line and attach the butterflies to it. There are two types of fastening: either piercing the bodies of the butterflies, or gluing them with silicone glue.
Next, we attach the threads with butterflies to the base of the frame and decorate it.
You can also try interesting option, if you make a wire ball! As a basis, you should take a pendant from a chandelier and place several butterfly templates on it using a glue gun.

Fabric chandelier

This chandelier is also based on a frame. As in the previous version, either old metal frames or thick wire are suitable for its manufacture.

After you have pre-prepared the base, start cutting out the fabric from which the lampshade will be made in the future. How long will it be ready product, depends on your desire, but it is worth considering that the width of the fabric must be the same as the diameter of the frame! Once you finish the pattern, you need to do a fitting.

Another nuance is that the top of the fabric will need to be sewn directly on the frame, which means that it (the frame) must be solid. Otherwise, if it is possible to thread it directly into the fabric, then you should first fold the top edge of the pattern and stitch it, and then iron it. Then we sew a seam on the side of the product.

To prevent the lampshade from losing its shape, you should pay due attention to the material. If the fabric is too light, “airy,” then the bottom of the product should be weighted. You can use cardboard or fishing line for this.

Carefully sewn fringe, lace or braid will look just as beautiful. But do not “overload” the product! The process of creating a fabric chandelier is similar to making a lace chandelier. So you can safely experiment with the materials that are placed on the frame.

Lamp made of threads and a balloon

Materials:

dense threads, such as wool, cotton, or jute rope - at least 1 meter;
cartridge;
petrolatum;
PVA glue;
a brush for applying glue and Vaseline (it is advisable that the brush does not fade);
1 or 2 pieces balloons(the first in order to work with it, and the second in order to check the finished product, if desired);

Process of creation:

Inflate the balloon to a certain size and secure it. Remember that the finished work will exactly follow the outline of the ball! Using a marker, draw a couple of circles at the top and bottom in order to determine the boundaries of thread winding.
Using a brush, coat the entire perimeter of the ball with Vaseline.
Pour PVA into plastic container and thoroughly process the threads with it (It is not advisable to apply glue to the entire length of the threads at once! Process them as you wind them around the ball!).
Taking into account the boundaries that you drew with a marker, wind the threads around the ball. Do not forget that the future appearance of the product depends on the density with which you wind it.
After wrapping, you need to leave the product for a day until it is completely dry; After complete drying, you need to burst the ball and remove it through the holes.
Cut a spot in the top and insert the cartridge.
To be completely sure that the product is strong, you can insert a balloon into it and inflate it. In a similar way, you can check the flexibility and reliability of the lampshade.

Alternatively, you can paint the structure with a spray can or acrylic paint and attach all sorts of things to it. decorative ornaments, such as butterflies, artificial flowers or beads. Also, a great idea would be to arrange several balls in the form of a bunch of grapes and fasten them together.

Wine bottle chandelier

This version of the chandelier is a little more complex than the previous ones. Making a chandelier this way is quite difficult; the manufacturing process will require care and attention. However, you will like the result!

Materials:

wine bottle;
glass cutter;
sandpaper for sanding edges;
cartridge;
electrical wire;
metal or wooden frame, rim.

Process of creation:

First you need to prepare the bottle itself for further manipulations with it. The first step is to draw a straight line around the perimeter at the level you need. This is required in order to cut off the bottom of the bottle using a glass cutter;
To avoid cutting yourself on the glass, you need to sand the sharp edges sandpaper;
Pull the wire through the neck of the bottle and then connect the socket;
Attach the bottle to the frame.

You can also decorate the bottle with all kinds of decorative items, or leave it in its original form. In any case, it will look original and impressive.

The number of products on the frame depends on your desire. You can either leave one bottle or secure four or more bottles at once.

Laserdisc chandelier idea

This idea is great for those who have a large number of laser discs left in the house, but don’t dare throw them away. It’s worth noting right away that manufacturing options and the result can be very different. It all depends on your imagination and creativity!

Materials:

two round wooden planks of different thicknesses, and which are slightly larger in diameter than the disks;
racks made of metal or wood;
Fluorescent Lamp;
magnetic switch;
disks.

Process of creation:

Make a hole in a thicker board and install a starter with a switch in it.
Then connect it all to the lamp.
String disks onto the lamp.
Place the stands around the discs and secure the top.

The finished product will delight its owners for a long time, and it does not require special care. It is not advisable to place this type of chandelier in a child’s room so that the child cannot harm himself (only if the chandelier hangs out of reach).

Shabby chic chandelier

To create spectacular lighting in a room, you can also make a chandelier from fabric or beads. The result will be a kind of candelabra or lampshade in the “shabby chic” style.

Materials:

a ready-made metal or wooden frame (or it can be made from an old hoop, garden basket, thick wire);
socket and lamp;
chains and threads for decoration;
all kinds of beads and seed beads.

Working on such a lampshade is not difficult, but it is a very painstaking task. Such chandeliers usually consist of two or three levels of rings, which are located on top of each other. It all depends on the size of the chosen bases. If you take rings of the same diameter, the finished product will be made in the “modern” style.

One of important points is that before you start decorating the chandelier you need to paint and wrap the frames with decorative materials!

The approximate consumption of beads is:

For the lower part of the lampshade - 16 mm beads, about 15-17 pieces per thread;
For the upper part of the lampshade - 12 mm beads, about 35 pieces per thread.

Naturally, when stringing beads on a thread, you can increase or decrease their number or the degree of thread tension. But it is still advisable to stock up on materials in excess of the norm.

The essence of the work is to hang threads with beads in a “waterfall” or “cascade” so that they flow downward along the structure.

In order to create the effect of “muting” the light, you can sheathe the frame with thick fabric.

A DIY chandelier will definitely add a fresh touch, originality and beauty to your interior. You will immediately notice how the room will sparkle with new colors, and your guests will sincerely admire your creativity, hard work and original taste!

90 photos of DIY chandelier ideas

Interior design will be incomplete without lighting design. The right lamp can completely transform a room. To show off your individuality and creativity, try making your own chandelier. There are no restrictions in the choice of materials. Get inspired by handmade lamp ideas in different styles, three detailed master class will help you make a unique decorative item with your own hands. And tips on connection and installation will help with installation.

The first step is to decide on the material that you will use as a base:

old chandelier;
all kinds of rings, hoops, frames - for the frame;
basic paper lampshade;
natural materials;
other.

The easiest way is to use an old one as a base. unnecessary chandelier, which has already served its purpose. Such a restoration will help you look at this rarity in a completely new way and extend the life of the lamp. There is a clear advantage to using old frames: the main elements such as the frame, mounting and all the electrical installation are already ready. All you have to do is design without thinking about any technical points.

Other materials will require more attention to connecting wires and sockets. Homemade chandeliers and lamps on a flat round or other shaped frame can be of any size, made in different styles and techniques. The manufacturing principle is simple: various decorative elements are attached to the frame around the perimeter: beads, fringe, paper and cardboard figures and various unusual things. It turns out spectacular.

Another easy way to make your own chandelier is to use a paper lampshade that you can buy at the store. Lampshades come in different sizes and colors, you need to choose according to your idea. You can use several identical lampshades to create one lamp - your imagination will have plenty of room to run wild.

A paper lampshade costs a penny, but there are hundreds of ideas for transforming it!

Using natural materials has become a new trend in interior design. Creative ideas using branches, roots, cones and other improvised means are becoming more and more popular and find a place in different design styles.

Ordinary branch in in capable hands turns into a Scandinavian style lamp

If there is no suitable frame, you can always take a coil of wire and make a base for a chandelier from it the desired shape. Another option is to not use the frame at all, replacing it with a balloon for a while.

Video: do-it-yourself ball chandelier made of threads

What kind of chandeliers you can make yourself

You need to choose ideas for creating a lamp for the ceiling depending on what style you have chosen to decorate your home. Approach the issue responsibly, look at the photos of original chandeliers made by yourself, and choose the most suitable lamp for your interior that you will like.

Homemade lamp in boho style

The currently popular boho style is perfect for handmade lovers. This is a free style that is distinguished by a variety of materials, colors, textures and shapes. In such an interior, everything is possible, and the chandelier should be its highlight.

Artificial flowers will decorate any craft

A little fringe and hot glue - fresh and original

Fringe is a favorite element of boho fans. When creating a chandelier with your own hands, this material will come in handy. Moreover, there are all kinds of braid with fringe on sale, which simplifies the process even more.

To make a boho ceiling lamp, take a few rings different sizes, connect them in decreasing order and decorate each with braid. Original chandelier ready, all that remains is to secure the cartridge with wire.

As an option, instead of ready-made factory fringe, you can use colorful or plain ribbons, ribbons and threads. You will have to tinker a little longer, but as a result you will get homemade chandeliers that are unique in their kind.

Even old T-shirts and dresses cut into strips can be used as braid

Retro and vintage

Into the interior vintage style homemade chandeliers and lamps fit quite organically. Most suitable option in this case, a repurposed chandelier from “those times.” You can find it at your grandma's house or at a flea market for pennies. The main thing is that the device works. But even if it doesn’t work, it doesn’t matter, you can always fix it.

The following decorative decorations are suitable for a vintage lamp:

crystals;
beads;
lace;
feathers.

Remove the old shades and decorate the frame with prepared plastic crystals.

Important! To make the picture complete, use old-style light bulbs - representing candles. A retro chandelier will lose its charm if spiral holders are screwed into the sockets.

A fringe with feathers, glued to a round paper lampshade around the perimeter, will turn the lamp into something weightless and airy. This DIY chandelier for a home decorated in vintage style will become the center of the composition. Start gluing from the bottom tier, gradually working your way up. Your task is to hide the attachment points with the next layer of feathers.

This lampshade will suit both retro interiors and modern design Houses

Another essential attribute is lace. But how to make a lace chandelier with your own hands? A balloon, PVA glue and grandma's lace napkins come to the rescue. If you know how to crochet, you can make several openwork napkins specifically for these purposes.

Take several knitted elements and soak them generously with PVA glue. Don't worry, after drying the glue will become transparent and will not be noticeable. Take a balloon of the desired shape and size. Lubricate the surface of the ball with rich cream or oil and carefully glue the napkins.

Your lampshade may be in the shape of a ball, then you need to start gluing from the bottom. The central element of the first napkin should be strictly in the center of the lamp. If you need a slightly open shade, you should start from the side surfaces.

After the glue has completely dried, you need to release the air from the ball. Remove the ball and the shade is ready.

The idea is ridiculously simple, but how effective!

Experiments with lamps in the nursery

Often, when making renovations in a nursery, parents cannot choose a chandelier that the child would like and look good in the interior. If you find yourself in this situation, learn how to make a chandelier with your own hands and create the lamp your child dreams of.

Many girls dream of a room that looks like a fairy or princess's bedroom. A magical chandelier made of rose petals floating in the air will be a good addition to a fairytale nursery. Use as a base old lampshade from a floor lamp or make a frame from steel wire.

Ready-made artificial rose petals, which can be found on sale, are suitable as decoration. Another option is to make your own petals. To do this, you will need a thin fabric of the desired color that will not fray at the edges. The tools you need are scissors and a needle and thread.

Cut round petals according to the prepared template. Connect them with a thread to make garlands. Attach the resulting threads around the entire perimeter to the frame. In the center of the frame, make a wire base for the cartridge and a suspension for mounting on the ceiling.

This chandelier is as light as a ballerina and as delicate as a feather.

if you have glue gun, making lamps with your own hands will not be a problem. A cool idea for a nursery is a colorful chandelier made from plastic cups. Glasses must be made of durable and transparent plastic. These are often found in the party departments near balloons and caps.

The work of connecting the elements is quite meticulous. They start from the middle. Select the diameter and connect the required number of cups around the circumference. Pick up rows one by one until you reach the top of the lampshade. Then turn the workpiece over and repeat on the other side. The bottom of each glass should be facing the center of the sphere. There will be a fairly large space in the middle where you can easily place a light bulb.

DIY children's lampshade - it's very simple

Simple lamp ideas for a couple of dollars

A very simple, but at the same time cute idea - a night light made of plywood. The choice of shape is limited only by your imagination. A plywood figure is mounted at a short distance from the ceiling or wall, and a light bulb is located behind it. The result is a muted, diffused glow around a dark silhouette.

A popular option is the cloud. Cut out a cloud from plywood or chipboard to beautiful composition you can make a few more reduced clouds. Paint the clouds white with acrylic non-toxic paint. Attach to cloud with reverse side metal elements in the shape of the letter "P". Remove the wires and connect the cartridge. Then screw your cloud to the wall, hiding the wiring and light bulb behind it.

You can make such a night light chandelier with your own hands in just a couple of hours.

IMPORTANT! Please note that any homemade chandeliers can only be used with those types of light bulbs that do not heat up during operation. Diode lamps are best suited. They do not heat up, shine brightly and consume little electricity. In addition, the variety of shapes allows you to choose a light bulb for even the most original lamp.

A simple and traditional way is a cylinder lampshade. These are often found on old floor lamps. The upper and lower edges of the lampshade are formed from two identical circles. Fabric or paper is stretched between them. Depending on the color and print, the same chandelier model can be presented in completely different styles - from ethnic motifs to minimalism.

Such a lampshade can even be made from a piece of wallpaper.

Simple, but spectacular idea– spider chandelier (photo below). Its highlight is the long wires, which are not hidden anywhere, but, on the contrary, serve as decoration for the ceiling. They resemble the long legs of a spider, which is why this model is called that. A socket is connected to each wire, and a light bulb is screwed into it. The wires spread across the ceiling in all directions, are attached to support points and hang down. Bold and extraordinary, very easy to implement.

The lamp really resembles a large spider with thin legs

The most original ideas for the brave

In principle, to make chandeliers for your home with your own hands, you can use, without exaggeration, any object as a basis. Turn on your imagination and you will understand that any thing can be creatively played out.

Old wooden clothespins? What an idea for a homemade lamp! The principle is the same: frame, decor, socket mounting, fixation on the ceiling. The result will exceed your expectations. This chandelier will decorate a loft-style interior. It looks very original.

Wooden clothespins– stylish and environmentally friendly

A skein of thread and a flower basket? Wonderful! Don't be afraid to experiment. Cut the threads and tie them to the top edge of the basket. Tie a knot at the bottom, straighten the drapery a little, decorate with beads to your taste and attach to the ceiling, where the wiring is already out and the light bulbs are connected.

Everything ingenious is simple, and this idea is proof of that

Pompons, origami figures, Christmas tree decorations, beads, dishes, tea sets, cutlery, CDs, all kinds of scraps, trimmings - if you wish, you can transform this trash into a mind-blowing lamp.

Step-by-step master classes on making chandeliers

For those who want to try making chandeliers with their own hands, we offer original ideas And step by step guide. The most popular and successful lamp ideas are discussed in more detail. If you follow the recommendations and put in a little effort, it will turn out the same as in the photo, and maybe even better.

Chandelier made from plastic bottles

Some people believe that used plastic bottles should be sent to a landfill, or, as a last resort, to a recycling plant. But some needlewomen don’t think so. Ordinary green, brown and clear drink bottles are turned into incredibly beautiful lampshades.

You can make a fantastic lamp yourself

Such a chandelier made from plastic bottles in the shape of leaves can live in your home. To do this, collect necessary materials and tools:

bottles of several colors;
scissors;
thin wire;
awl;
soldering iron;
wires;
cartridge;
switch.

Tools and materials

Instructions for making and assembling a chandelier:

Draw a leaf-shaped stencil. It is better to do this on thick cardboard.
Cut out the resulting sheet.
Place a stencil on the plastic and trace it with a pen. Find optimal location templates so that there are as few scraps as possible.
Cut identical plastic leaves of all colors. The edges of the leaves may seem too sharp and sloppy to you - don’t worry, we’ll fix it soon.

Chopped leaves

When the supply of leaves is ready, we begin processing. This is where a soldering iron comes in handy. Heat it up and move it along the edge of each element. The plastic will begin to melt and the leaves will begin to curl.

It turns out pretty neat

Process all the details in this way.

You need to prepare a lot of leaves

Using an awl, make holes in each sheet at the base.
Collect twigs from wire and leaves. Use different shades so that the branch is larger and brighter. Fasten the wire in the holes of the plastic, try to make the branches thick to hide the wire behind the leaves.

Wire twigs

Let's start assembling. From small branches, collect larger ones, connecting them together with the same wire as if you were weaving a wreath. Form the lampshade into the shape you need. The wire is flexible; if something goes wrong, it can always be corrected and straightened.
At the base of the chandelier, make a wire mount for the socket.

Place the shade on the chandelier.

Luxurious glass chandelier

From glass bottles from wine you can create unique chandelier for a living room or bar. The idea is large-scale - powerful wooden base and a dozen bottles for light bulbs. This entire bulky structure will be suspended from the ceiling.

Could a true wine connoisseur have another lamp?

What you will need to make your own bottle chandelier:

wine bottles - yes different color and brand, but of similar shape and size;
boards;
hanging chains;
self-tapping screws with loops - for fastening;
glass cutter;
jigsaw;
sander;
drill;
stain;
cartridges and wires.

The master class is quite complex, but detailed instructions will help you cope with the task:

Prepare the bottles: remove labels, wash them, dry them. Make a mark at the same height on each bottle. Use a glass cutter to cut off the bottom of each.

Sometimes labels have to be soaked in water to make them easier to remove.

Take care of the boards. Cut them using a jigsaw into pieces of the required size - be guided by the area of the room and the number of bottles (in the example there are 10 pieces).

Sawing boards

Sand the edges with a sander. The ends should be as smooth as the other surfaces.
Stain the wood with stain. The color depends on your interior. The author preferred a dark shade.

Get a deep, noble color

Mark the installation locations for the lampshade bottles. They will be installed symmetrically in two rows of 5 each.
Using a drill with a 25 mm diameter wood bit, drill holes in each mark.

Drilling a hole

At the top corners and perimeter of the base, screw screws with loops for fastening to the ceiling. Measure the chain pieces of the required length and connect them to the base.
Place necks in the bottle holes.

Bottle hole

Prepare 10 cartridges and connect them with cables. Thread each individual wire through the bottle until there are 10 wires left on top of the light.
The cables are connected into a circuit and insulated. Hanging the chandelier by chains. Electricity is connected.

Ready made lamp wine bottles

Pearl threads - a great idea and implementation

Glamorous chandeliers in the shabby chic style or sparkling Swarovski - lamps made of stones and beads attract attention and make any interior festive. Making a chandelier with your own hands from beads and rhinestones seems something unattainable, but in fact the technology for creating it is very simple.

For such a bright and massive model, prepare:

ready-made garland beads (sold in any decor department) or a large number of beads, fishing line and patience if you decide to collect the threads yourself;
garden hanging for flowers or other similar basket;
acrylic paint in a can;
knitting wire or special wire for making jewelry;
glue gun and rods for it;
wire cutters

Necessary materials

How to make a lamp from beads with your own hands:

Prepare the beads. It’s better to take ready-made beads (for example, to decorate a Christmas tree), otherwise you’ll have to tinker with stringing them. If you are not happy with the color, paint them with spray paint.
While the beads are drying, work on the basket. If it is rusty, go over the metal with a brush. If in in good condition or new - just paint it.
The beads are dry. Now you need to assemble one long one from several garlands. Use hot glue to connect the outer beads.
Cut the wire with wire cutters into pieces of 5-7 cm. You will need several hundred of them for such a chandelier.

The work is monotonous, but it goes quickly

Take a garland and one piece of wire. Secure the beads to the basket at the bottom. Continue wrapping the beads around the basket, securing the result with wire so that the decor does not move to one side.

DIY decoration of the lower part of the lampshade

When the lower part of the basket is completely ready, start decorating the upper half. Long threads are passed through the top of the lamp and pulled through the top edge of the basket. Do not pull the garlands; they should hang freely. Lock them at each turn.

Almost ready - all that remains is to remove the remaining wire

If you did everything correctly, the beads will completely hide the basket and hanging chains. You can decorate the resulting masterpiece with ribbons, rhinestones or other elements.

It looks beautiful with or without a ribbon – it’s a matter of taste

Subtleties of installation and assembly

Everything is clear with the design of the lampshade - there is a place for imagination and invention. But what about the electrical part? After all, without a correct and secure connection, not even the most chic chandelier.

We really hope that if you decide to make an electric lamp yourself, then you are familiar with the intricacies of installation and safety rules. But just in case, let’s list all the important little things again:

Never spend electric installation work(even a banal replacement of a burnt out light bulb) with the power on.
Do not hang the chandelier by the cable. The structure must be supported by a suspension: a chain, a rope, a cable - anything, but not a working cable.
The light bulb should also not hang on the wire - because of this, breakdowns most often occur. Provide a support mount for the socket at the base of the lamp, this way you will remove the load from the cable.
Use the indicator to identify the wiring phase. There is no need to do this “experimentally”, connecting the device at random.

The yellow wire usually represents ground

Use three-core, double-insulated wire. The cross section is selected depending on the total power of the device. For a lamp up to 60 W, an area of 0.35 mm 2 is enough, up to 120 W - 0.5 mm 2, up to 300 - 0.75 mm 2.
Achieve good contact at the joints. Poor contact can cause the wiring to heat up, which is very dangerous.

Use a screwdriver to secure the cable in the socket.

Incandescent lamps are incompatible with paper lampshades - this is a fire hazardous combination.

As you can see, if you follow simple safety rules and use a creative approach, anyone can make a homemade lamp. Photo ideas inspire your search creative solutions and an extraordinary approach. Your lamp will reflect your personality and decorate the room.

Give the room a unique and original design will help decorative details in interior design. A DIY kitchen chandelier is an extraordinary detail, made taking into account your own wishes and preferences. Making this element will not be difficult, but at the same time you will have to work a little.

Master classes on making chandeliers

To make a chandelier with your own hands, you can use various material and manufacturing technique, depending on the person’s imagination. There are several traditional and simple options that can be made from available materials and which will bring new colors and emotions to the kitchen interior. Homemade chandeliers are becoming increasingly popular, due to the opportunity to transform your home without spending almost a penny.

As a rule, such materials can be found in the house:

threads;
paper;
plastic dishes;
newspapers;
disks;
plastic bottles, etc.

Chandelier made of threads

It's pretty simple and affordable way, the materials for the implementation of which are available in every home.

You will need:

balloon;
cotton threads (color selected to match the style of the interior);
PVA glue.

Manufacturing technique:

1. At the first stage, you need to inflate a regular balloon.

3. The ball is wrapped with threads so that there are no gaps. The work requires some time, so you should be patient, as the end result will undoubtedly please you.

4. The product must be left to dry completely for at least 1 day. To check the strength of the structure and make sure that the future chandelier will not lose its shape, the ball in it needs to be deflated and then inflated again.

5. When the structure has dried and the threads have become hard, the ball bursts and is carefully removed.

6. A hole is cut under the light bulb, into which the socket with the wire is lowered.

The process of making a lampshade from threads

A DIY kitchen chandelier is decorated with additional decorative elements. These can be butterflies, flowers, scraps of fabric, etc.

Lamp made from a plastic bottle

There are two ways to make a chandelier from plastic bottles. Let's start with a non-standard option.

To complete the work you will need:

plastic bottle 5 l;
disposable spoons;
glue;
cartridge with wire.

Necessary materials

Manufacturing process:

1. First, the bottom of the bottle is cut off.

2. In the spoons, we separate the handles from the scoops, which we will need to make the structure.

3. After preparing the adhesive mass, apply it to the scoops, which are attached to the ribs plastic container. In this case, we attach the upper scoop with an overlap; it should be in the middle of the two lower ones, with the convex side outward. Gluing should start from the bottom level. This way the entire perimeter of the bottle is worked out.

4. When the structure is dry, install the cartridge through the neck of the bottle. The result was a beautiful chandelier, resembling fish scales in appearance. The product can be left in its original form or painted in any suitable color.

Making a lampshade for a chandelier

The second way to make a chandelier involves using the following materials:

plastic bottle 2 l;
cotton threads;
glue.

Cutting off bottom part bottles, approximately 3 cm. We wind a thread soaked in glue onto the rest horizontally and carefully, from top to bottom. As a result, we get a beautiful and stylish lampshade that can be used separately. You can connect such parts in several pieces.

On video: chandelier made from a bottle and plastic spoons.

Beads as a base

The work of creating this type of chandelier is quite difficult and requires special care and consistency.

To create a product you need to prepare:

beads or beads;
basket frame;
nylon threads;
wire.

Manufacturing technique:

1. First of all, you need to make a blank in the form of a wire ring.

2. The workpiece must be attached with wire to the frame.

4. After drying, the cartridge is threaded and comfortable work the chandelier is suspended.

5. Beads or beads are threaded through a thread from the basket to the ring. The decoration itself, that is, the number of beads and threads, can be anything, based on personal preferences. The entire basket is decorated in the same way around the perimeter.

The process of making a chandelier from beads

Before decorating the chandelier, you must first install the socket. Also, for convenience, you can hang the structure on a hook, which will make the work much easier.

The chandelier can be hung on a hook

On video: handmade bead chandelier.

Wood construction

This is a very beautiful way to decorate the kitchen, besides, the use natural material will only do good.

It is necessary to prepare the following materials:

strips for door trim, 30-45 cm – 12 pcs.;
glass jars, 1 liter for lampshades – 6 pcs.;
paints (white and wood colors);
self-tapping screws;
sandpaper;
Seaming machine

The work consists of the following steps:

1. Using sandpaper, we achieve absolute smoothness of the planks.

3. The wood is painted wood color.

4. You need to build a regular hexagon from the boards and secure the structure with self-tapping screws.

5. The cartridge is fixed to the hole in the cover.

6. We paint the cans white or any other color, then we roll them up with light bulbs inside. A beautiful and stylish chandelier is ready.

On video: unusual ideas for a wooden chandelier.

From wooden sticks

A country style chandelier will decorate any kitchen. To create an original lampshade you will need:

kebab sticks;
organza ribbon;
glue.

The basis of the design are sticks, which are laid out around the perimeter of the square and fastened with glue. The work is quite painstaking. You also need to ensure that the sticks lie flat for the symmetry of the future chandelier. The upper part is sealed with cut sticks so that they do not protrude. Don't forget to leave room for the lampshade.

After complete drying, we begin to decorate the product. The protruding edges of the sticks are decorated with multi-colored organza ribbons. At the last stage, the lampshade is hung on a hook and the cartridge is fixed in it through the left hole.

On video: option for making a chandelier from sticks.

From disks

In order to make such an original lamp, it must be assembled correctly. Materials used:

round boards of different thicknesses - 2-4 pcs.;
stands made of wood or metal;
disks;
magnetic start;
bulb.

The planks should be slightly larger in diameter than the disks. In the largest board you need to drill a hole into which a magnetic start with a switch is installed, after which it is connected to the lamp. Discs are strung onto the lamp in the required quantity, which will determine the height of the chandelier. Racks are mounted around the disks and secured top part our design.

1. First you need to remove your old lampshade and wash it thoroughly.

2. Clean the surface with sandpaper and coat it with primer.

3. The glue is diluted in the required proportion with water. The resulting mixture is carefully smeared on a napkin with the image, and then applied to the lampshade.

4. Using a piece of fabric, you need to slowly smooth out the pattern, removing air and other imperfections.

5. At the final stage, we use varnish to consolidate the result.

On video: decor of the lampshade using decoupage technique.

For those who want to add a little creativity to the kitchen interior, designers offer many bold and successful solutions. The chandelier can be made from an old meat grinder, into which a cord is threaded, from a grater, assembled spoons, muffin tins, as well as old pans in which holes are made using a drill. Such products look very bold and elegant, decorate the interior and focus on important details.

If desired, adding a little imagination, the structure can be built from almost any material and in any style. Such creativity, made with your own hands, will delight and bring warmth and homeliness to the overall atmosphere.

Sections