Home
Programs
How to hang a hook in the bathroom? Ideal for photo frames! How to hang a picture on the wall without nails.

How to hang a hook in the bathroom? Ideal for photo frames! How to hang a picture on the wall without nails.

The design of a window opening cannot be realized without the use of various fittings. Curtain fasteners are an important component. Modern options fixing curtains on the eaves are very diverse, they all have their positive and negative aspects. Among them, the most common are universal hooks, which are very easy to use. This fittings have aesthetic and functional qualities. Hooks provide fastening and movement of canvases along the cornice and can act as independent decorative elements.

What are they called?

The elements responsible for attaching curtains to the cornice are called hooks. They are the cheapest option for securing curtain fabric to a curtain rod. They are easy to attach and easy to use. These fasteners are suitable for hanging lightweight fabric.

They can be used with any flat design cornice, in this case it is necessary to fix them on both sides, so they will not fall out during operation.

There is another type of decorative fittings - special holders that are used together with curtain tiebacks, fixing the curtain fabric on the sides, opening the window slightly and forming beautiful folds.

Peculiarities

Hooks for fixing curtains on the curtain rod are sold individually, but sometimes you can see a special curtain tape with hooks strung on it. It can simply be stitched to the curtain fabric. The fastening elements here are securely fastened to the string, from which they will not slip, so this solution is more reliable.

Advantages:

  • low price - if you choose the piece option, you can buy exactly as much fittings as you need, just calculate the required quantity for the curtains plus spare ones. You can use curtain tape, the cost of which is low;
  • ease of installation - securing the fastening elements is not difficult;
  • reliability – strong products can last quite a long time;
  • practicality - if one hook breaks, it can be replaced with a spare one;
  • Convenience – convenient fastening elements, which can be removed very quickly and easily if necessary to wash the curtains.

The peculiarity of such elements is their versatility; they are designed for string cornices, models with grooves, and classic rods with round profile. The fittings have a design that allows the use of hooks to move from curtain rings to curtain panels.

You need to choose hooks so that they last a long time, but at the same time are reliable. The choice often depends on the type of cornice: round rods are suitable for elements attached to rings, and for a baguette structure - plastic products with wheels. Be sure to use clamps so that the curtain does not fall at the most unexpected moment.

Hooks are most often hidden from view, so they do not greatly affect the decor of the curtains. They can be used in almost any style and for any room.

Like other types of fastenings, hooks have their disadvantages:

  • the need for additional fasteners or a special cornice;
  • not suitable for heavy curtains;
  • noisy movement;
  • plastic products break easily.

Species

Depending on the design features, the main types of hooks are divided into:

  • Decorative used as decoration for curtain compositions. Such fasteners have an attractive and interesting design.
  • Hidden products can be made of plastic, metal or other material that is not noticeable; the fastening is hidden in the folds of the curtains or under the decor of the console.

  • Transitional– these are clamps that are the connecting link between hinges, eyelets, clips and cornice. At the bottom of the structure there are clothespins to which the fabric is attached, and at the top there is a hook that clings to the ring.
  • Basic hooks act as an independent fastener that does not require a companion element.

  • Closed the options snap onto the curtain rod and then move freely along the rod, so the loops on the curtains to which the hooks are hooked cannot come off. There is no need to worry when moving the curtain: it is very securely attached to the curtain rod.
  • Open They are easy to use and easy to put on curtain eyelets. If necessary, the curtains can be quickly removed, and it is not at all necessary to dismantle the cornice.

In addition to the main group, we can highlight a decorative accessory that secures the tiebacks. This product is also called a hook. Such fittings are used to secure curtain fabrics with tiebacks. Their task is to pull the material to the side, forming a round fold.

The design of these elements varies greatly. It can be completely invisible, focusing all attention on beautiful textiles, or pretentious, when they themselves act as decoration.

The surface of products is often decorated with a variety of images: a flower, an ornament, an animal’s head, a snake, a snail and much more that design thought is capable of. This type of hooks are wall mounted or window slope self-tapping screws, as well as special staples. In aesthetic terms, sometimes there is something in common with the design of the cornice. They are often sold as a set.

Materials

Curtain hooks are made from different materials:

  • Plastic is considered the cheapest. Hooks made from it will not be able to support curtains that have a lot of weight, but they are good for holding airy curtains. The main advantage of such fittings will be the silent sliding and sliding of curtains. However, over time, wear of the plastic is observed, and this leads to deformation and loss of performance.
  • For the manufacture of metal products use aluminum, brass, steel. This fastening is considered the most reliable, however, they may not cope with multi-layer curtains. Compared to plastic hooks create noise during operation. Must choose quality material, otherwise it may be subject to corrosion.

The combination of plastic and metal is necessary for the product to have all the positive properties of both materials at once.

  • Plastic, iron and metal-plastic Hook options are designed to hold light and medium-weight fabrics. If it is necessary to use very heavy multi-layered and voluminous curtains in the interior, only eyelets or hinges can hold them in place.

If for some reason you don’t like any of the options, you can make original curtain hooks from improvised materials.

  • Paper clips. Try using this one to attach curtains stationery. The incredible variety of paper clips makes it possible to create something unique. For example, you can fasten one to the other, bend it in an interesting way, or find an unusual color.
  • Pins. Sewing accessories are also varied. Decorative pins are always on sale. Creative designers hang curtains on them. Try it too.
  • Wire. The hook can be made from ordinary wire. To do this, it is bent figuratively, forming the holder itself, then decorated with beads, seed beads, flowers or other material or decorative elements.

There are many manufacturing options decorative items for fastening curtains from what is in the house. The main thing is the manifestation of imagination and willingness to experiment.

How to hang it correctly?

Hanging curtains must take into account different types designs. There are several types of curtain rods on which curtains are attached using hooks:

  • forged;
  • ceiling;
  • aluminum;
  • bay window;
  • string;
  • old and new type rack.

There are many options for fixing curtains on the cornice. Among them, curtain hooks are the most common option. They are attached to the rings and also act as independent fasteners.

The most common use of this fastening element is together with profile cornices; they are mounted on the wall and ceiling. It is possible to use hooks for fixing fabric on a string cornice; they are also well suited to round models.

Fixing curtains with curtain tape is extremely simple. A ribbon is attached to the edge of the curtain, which has strong threads in one or two rows. They act as loops. The hooks, caught on them, are hidden behind the folds of the fabric, since the braid tightens the fabric, creating even vertical folds, and the level of their pomp can be adjusted.

Features of fastening with hooks using curtain tape:

  • ideal for attaching curtains to an open cornice;
  • universal fastening, equally suitable for most types of curtains;
  • affordable price;
  • very long service life.

Weightless curtains that do not block access to the balcony, which will remain stationary, should be secured with transparent plastic hooks. They are usually sewn to curtain tape. For ceiling models of cornices, which are a rail, the only possible fastening there will be hooks with a roller for curtains.

Sometimes, in order to securely fix the hooks, they are sewn directly onto the fabric. Such fabrics have to be washed together with the accessories. If the hooks are plastic, then nothing bad will happen, because plastic does not react to water in any way. It is better not to sew steel hooks, but to use another method of fixing them to the curtain. Metal can oxidize in water and stain the fabric with rust, which will be difficult to get rid of.

Any interior without textile decoration looks unattractive and boring. Even correct selection curtains, curtains and other curtains may not bring the desired result without very important functional accessories - cornices and holders, which help to effectively diversify the design of textiles and solve many additional functions: visually expand the space of the room, provide access to light, etc. Knowing how to attach curtain holders , You can independently give the interior space a new, original look.

Curtain holders are special functional hooks that are used to hold curtains, curtains and other types of textile decor. They are fixed to the wall and are most often used as a convenient addition to clamps, tiebacks and tassels, which help to assemble and beautifully decorate textile products. Before attaching curtain holders , you should decide on its model, design features and carefully select the location of the product. The fact is that modern domestic and foreign manufacturers offer large selection holders from various materials, designed in a wide variety of styles and design directions.

Types of curtain holders

Depending on the style of the interior space, the design of the cornice or other curtain fastening system, holders are selected and a decision is made about their placement on the wall. After all, the textile design of a window opening or door to a balcony directly depends on environment. Holders are also chosen to match the decor of the room, curtains and cornice, as an important accessory that is always in sight and plays an important role in composing the overall composition of the window frame.

According to the composition of materials, curtain holders are:

  • wooden;
  • plastic;
  • metal;
  • combined.

Depending on the type of product, its design and weight, fasteners should be selected. Often, when selling cornices, they are accompanied by holders, as well as hardware: screws, self-tapping screws, etc., which are optimal for high-quality and reliable fixation of the entire structure.

Additionally, you should pay attention to the model of the holder, which is selected depending on the type of curtains and their design. Be sure to take into account the thickness and other parameters of tiebacks, functional elements that help support textiles on the side of a window or door, and create a beautiful and uniform drapery of the canvas. Their use has a positive effect on the design of the room and its illumination, and also allows you to decorate the curtains, making them more interesting and varied.

Depending on the above factors, you can choose the following types of holders:

  • hooks;
  • sockets;
  • magnetic stretch marks.

Each type of holder has its own design features and type of fastening. Their location is selected depending on the design of the textile fabrics, their density and decorativeness.

Previously, it was customary to fix any types of curtain holders in the window sill area. However, today window openings can have a wide variety of configurations, up to the floor surface or 30-40 cm above it.

It is also important to take into account the height of the room, the width of the window and its configuration, the opening and ventilation system.

The most common ways to arrange holders:

  • The traditional way, at the window sill level.
  • Above the window sill level. Approximately at a distance of 2/3 from the floor plane.
  • Below the window sill line 20-30 cm.

For curtains of short length (up to the window sill or slightly below), the holders are attached above the bottom edge of the product (20-40 cm). Long curtains have much more room for choosing places for tiebacks. It should be remembered that the final version will significantly influence not only appearance window opening, but also the entire room.

The lower the tiebacks are located, the less natural light will enter the room. This technique is usually used when not very beautiful view outside the window or if there are problems with the frame.

You can try several options, draping the fabric with wide fluffy tails or a slight bend.

The exact location of the holders can be determined quickly and easily using regular tape or a ready-made grab. It is enough to ask someone close to you to imitate fixing the curtains to the wall, then placing them on the cornice. It is better to spend a little time and try on the most optimal place for the holder several times than to then redo the work and spoil the surface of the walls.

The holder can be attached easily and quickly using a drill or screwdriver. In addition to their direct practical purpose, correctly positioned and correctly installed holders will serve as an additional decoration for any window opening.

Video

This video may inspire you to decorate the curtains in your children's room.

After completing the renovation of the bathroom, the most pleasant stage begins - interior arrangement. Available in stores wide range various accessories that solve certain problems.
This master class will teach you how to hang a hook in the bathroom using self-tapping screws. Suction cup fittings do not require drilling into the walls, but the hook will be held most securely by fasteners.

Preparing for work

First you need to mark the places for drilling. It is recommended to make them in the seam between ceramic tiles. When drilling the tile itself, there is a risk of damage to the canvas. And then replacing a broken tile will not be so easy due to its possible absence.
Place the hook at the desired level and draw dots through its holes with a pencil.
We prepare a hammer drill or hammer for work. The choice of tool depends on the wall material. It is better to drill concrete partitions with a hammer drill; a regular drill can handle brick and drywall.

Drill selection

We select a drill with a suitable diameter. For this case, the size 5x85 mm is suitable. In addition, it is worth considering what type of walls we will drill. For example, concrete will not “take” a drill designed for wood or brick. For such hard material you need to win - an alloy of tungsten and cobalt, which in its properties is not inferior to diamond.
You can determine what material a particular drill is intended for by its tip and color. For example, drills for wood have a sharp tip and a steel tint, while for metal they have a cone-shaped tip. The drill for concrete has a plate Victory solder and characteristic white color.
How to drill a wall and hang a hook?
The shaft of the hammer or drill barrel should not be littered, so before inserting the drill, it is necessary to clean the tool. We bring it strictly perpendicular to the wall, lightly press the rotation button. During operation, concrete dust will fall onto the floor. You can prevent this by having an assistant hold a paper bag under the hammer while drilling.






Having drilled a little into the wall, we insert a plastic dowel into the hole and try on its required depth. IN in this case its size is 5x30 mm. Professionals use standard depth gauges for fitting. As soon as we get the hole of the required length, we finally fix the dowel in the wall.
We apply a hook to the finished holes, take a screwdriver and self-tapping screws. Screw them all the way in. You can also use a screwdriver, but it makes no sense to take it out for two screws.


At the end of the work, we make sure that the hook does not dangle and is securely fixed to the wall.

A clean and neatly decorated apartment is the dream of every housewife. An important attribute Such tidiness is the arrangement of all things in strictly designated places.

It is customary to store towels hanging on hooks. However, due to the current variety of such types of fastening, the question arises of which towel hooks to choose. We will talk about this in our article.

Advantages and disadvantages of hooks

These devices are a good option for storing towels, since this method does not contradict the basic requirements of sanitation, and in terms of convenience it is quite suitable for owners and guests.

On towels that are hung on hooks rather than stored on shelves or other places out of reach fresh air, the risk of reproduction and development of colonies of harmful microorganisms is much lower. In addition, they save space, which is especially important for small bathrooms and kitchens in small apartments. And then, these personal hygiene items, hanging in places of direct use, create the necessary comfort for the inhabitants of the home.

Along with the benefits of this type of fastening, there are also opposing opinions based on the possibility of disturbing the design and interior of the room due to hanging towels. But this drawback is unlikely to be true for bathrooms. Here they always come in handy, especially since the appearance of modern bath towels, on the contrary, can only decorate such a room. In the kitchen it is quite possible to do without hanging means for wiping dishes after washing them. And if there is dishwasher, then there is no need for towels in the kitchen.

Types of products

There are a wide variety of types and types of towel hooks on the market today.

On suction cups

Perfect for those who do not want to violate the integrity of the wall. Perfect for the pre-shower area (where there is not too much humidity). But we cannot recommend such holders, since they are rather weak for a large towel – even a dry one.

Velcro

A similar option to the previous one, but more reliable (it is known that suction cup mounts often fall off the wall, dropping everything that was hanging on them). This type is suitable directly for the bathroom.

Screw-on

Using self-tapping screws, bolts and other building elements - such products are universal, but not very popular, as they require violating the integrity of the wall structure.

Do it yourself

At home, you can make your own towel hooks from a variety of materials: stone, wood, leather or even concrete.

However, one of the most popular, affordable and pliable materials is plywood. Making a towel hook from this material is not difficult even for a beginner.

  • First you need to sand the plywood the right size, after which it needs to be primed. This will be the basis for future fastenings.
  • Further, the only limit is your imagination: you can paint the product in your favorite color or apply a design to it. So, you can draw a cute face if the hook is intended for a baby towel.
  • Attach the finished base to the wall in a convenient way.

  • To create a fastening, you can use a rope (from which you should make a loop), an alligator clip, or even regular buttons. You can also make a double hook using 2 fasteners. Or you can use a jigsaw to cut out decorative holders of any shape from the same plywood and glue them into the slots cut into the base according to the size of the finished holders. All parts, of course, should be processed and then painted.
  • You can add elegance to the mount by painting it in a single color tone (for example, beige or white).

This plywood towel rack is suitable for a dry room, since the material will not withstand high humidity.

What height is best to hang it at?

You can hang towel hooks at any height convenient for you. The standard distance from the floor is 190-200 centimeters. But here it is also important to take into account the growth of household members. For example, if a child will use the towels located on this holder, then the height should be reduced to suit his height. It is worth remembering that if you have pets, you do not need to hang towels too low.

A towel hook in the bathroom, although a very minor detail, can become an important component of the room's interior. If you like to be original, do it homemade hook from suitable material. This can not only add an interesting twist to the design, but also save money.

Interesting idea for making a towel hook - see the video below.

There are situations when you really need to hang a picture on the wall without nails or drilling: for example, the apartment is rented, you don’t want to spoil the wall with holes, bother the neighbors, or your husband is simply not at home. It is then that very simple and effective ways that will help you hang a picture, panel, poster or photograph on the wall without using a drill. Choose which one you like best!

1. How to hang a picture on the wall without drilling the wall: a paper clip or a coat hook

If you have wallpaper on your wall, make a small horizontal cut in it, fill it with superglue and place a paper clip, bent into a hook or a regular coat hook, and then cover the cut with wallpaper. Step by step instructions you can read by “implanting” a paper clip into the wallpaper .

2. Button

This method is similar to the previous one. Here, too, the base itself is “hidden under the wallpaper” and glued, and the protruding part acts as a nail on which you can hang a not very heavy picture. In the video below you can learn how to effectively hide the base of a button behind wallpaper.

3. Spider hook

You can buy it at a hardware store special device called "spider hook": o but has four pointed ends, which are easily attached to the wall with a hammer and leave practically no marks on it.This hook holds securelyon any wall, you can hang a picture or frame weighing up to 2 kg on it.

4. Needle

Another way to place light paintings is to stick a sewing needle into the wall. For example, you can carefully drive it into the wallpaper at an angle tailor's pin with head. Another option: break off the eye of a sewing needle with pliers and simply hammer it into the wall with the sharp end. This way, the hole in the wall is small and invisible, unlike nails or screws. At the same time, withama needle, steel and durable, holds the frame securely.


5. Double-sided tape

This method is suitable for walls with thin paper wallpaper or plasterboard partitions. Just apply regular double-sided tape to the edges of the frame and attach it to the wall. True, the disadvantage of this method is that the tape can leave marks on the wall; to prevent this from happening, it is recommended to keep the tape under 90 degrees in relation to the wall when removing the painting.


6. Command Velcro

The special technology of Command Velcro allows you to glue them to almost any surface and easily hang pictures weighing up to 2 kg on them. The advantage of this brand of Velcro is that it can be easily removed without damaging the walls. They Sold as a set of several strips: one strip is glued to the frame, the other to the wall. The more stripes, the heavier the painting can be.


7. Liquid nails

Liquid nails are a special glue that securely connects surfaces. Just apply to reverse side frames with liquid nails in small dots (if the picture is heavy, you can coat the entire frame). Then press the painting flat against the wall surface and hold for a few seconds.


8. Polymer glue

Polymer glue is convenient because it does not leave greasy marks behind. The principle is the same as with liquid nails: glue a heavy picture around the entire perimeter, and a light one only along the edges. For better adhesion to the surface, the frame needs to be pressed firmly and even left for a day, propped up with something.

9. Wine cork

The wine cork is cut into circles approximately 1 cm thick and glued to the wall with quick-drying glue (Moment glue or BF-2). After the glue dries, a nail is stuck into this cork. small size, on which the picture is hung.

Sections