Bosch silence plus instructions for use. Built-in dishwasher BOSCH SPV40E40RU - “Bosch Silence Plus dishwasher

- January 30, 2014

Relatively long drying time, but this is determined by the type of machine with condensation drying.

Advantages:

High-quality assembly, washing dishes at a high level, availability necessary programs washing, no frills. The presence of the 1/2 load function and the beam on the floor is very pleasing. Low energy and water consumption. Quiet. Very convenient height adjustment of the rear of the machine.

Flaws:

It is relatively difficult to install a façade with aluminum frames evenly.

Period of use:

a few months

15 3

Chebotarev Timofey

- January 24, 2015

a good quality machine, washes 5+ without any complaints. The only thing it lacks is a quick wash program. But there is an intensive wash, which makes it easy to wash pots and pans

Advantages:

cleans well, quiet, low energy and water consumption, beam to the floor

Flaws:

Period of use:

less than a month

5 1

Gushchina Olga

- May 12, 2015

This is my first dishwasher in my life - maybe that’s why there’s a lot of positivity? ;) but in general it’s wonderful - quiet - we currently live in an apartment without furniture or doors - we set it to wash at night - you can’t hear it at all! washes perfectly - we wash it only because we don’t always place the dishes very correctly

Advantages:

quiet, washes perfectly, childproof, water and electricity consumption is minimal

Flaws:

there is no quick wash mode - an hour or half an hour, but I’m not sure that this happens =)

Period of use:

less than a month

2 4

Zubova Daria

- January 27, 2016

second machine, there is something to compare with, so far everything is on top, very happy! Only my husband didn’t understand the instructions well.

Advantages:

cleans well, quiet

Flaws:

I haven't discovered it yet

Period of use:

less than a month

2 4

Maria

- December 10, 2014

It washes very quietly, for the sake of experiment we immediately put a glass baking dish in there (it was covered in burnt fat from the chicken), and much more. Washed away the grease with a bang, rid the mugs of tea stains and reverse side white plates from yellowness. I recommend it to everyone, you won’t regret it if you find it!

0 0

Instructions (manual) for the BOSCH SRV 3 dishwasher. A1. 3, SRV 4. 3A2. SRV 4.3M1. 3 EU, SRV 4. M2. 3 EU, SRV 4. 3M5. EU, SRV 4. 3M6. 3 EU: RT Service Center. Instructions for the BOSCH SRV 3 dishwasher.

Bosch Silence Plus Dishwasher Repair The essence of the problem. The Bosch Silence Plus machine cannot complete the washing process. Operating instructions for Bosch dishwashers different models. Find and download the manuals you need for free on our.

A1. 3, SRV 4. 3A2. SRV 4.3M1. 3 EU, SRV 4. M2. 3 EU, SRV 4. 3M5. EU, SRV 4. 3M6. 3 EU Dear visitors.

To avoid clutter of materials and for ease of navigation through the instructions for household appliances We have adapted the instructions for related dishwasher models. For differences technical characteristics We have made notes for individual models. If you do not see a special note in the differences separately for the model of your dishwasher, this means that the instructions fully correspond to the model of dishwasher you are interested in. BOSCH SRV 3.

Operating instructions, user manual for BOSCH dishwashers.
The manual for the BOSCH dishwasher contains a description of the control unit buttons, operating modes and recommendations for the use of detergents. Download for free and without registration the operating instructions in Russian for the German dishwasher Bosch Silence Plus SRS 45T78 EU: Free download: silence_plus-srs-45t78-eu.pdf.rar 27..

Bosch washing machines - operating instructions. Instructions - Freestanding dishwasher BOSCH SPS 40E42RU ActiveWater.

A1. 3, SRV 4. 3A2. SRV 4.3M1. 3 EU, SRV 4. M2. 3 EU, SRV 4. 3M5. EU, SRV 4. 3M6. 3 EU Symbols: Contents 1. Safety instructions 2. Getting to know the machine. Device for reducing water hardness 4.

Adding salt to soften water. How to add rinse aid.

Dishes are not dishwasher safe. Placement of dishes. Detergent. 9. Review of programs. 10. Washing dishes. eleven.

Maintenance and care. Troubleshooting. When to contact customer service. Safety instructions - Immediately upon receipt, check the condition of the packaging and the dishwasher itself for transport damage.

Never put a damaged machine into operation. IN in this case please contact the supplier of your machine. - Please hand over the packaging for recycling at a special collection point. - Corrugated packaging cardboard is made almost entirely from waste paper. - Styrofoam pads do not contain fluorochlorocarbons (FCKW). - Polyethylene packaging film (PE) ) is made partly from raw materials obtained by recycling waste.- Wooden frames(if any) are also made from wood residues and have not been subjected to chemical treatment.- The strapping material (if any) is made of polypropylene (PP).- Install and connect the machine according to the instructions given in the installation instructions.- When installing a dishwasher the machine must be disconnected from the mains. - Make sure that the protective conductor system of the domestic electrical wiring is installed according to regulations. - The parameters of the network to which the machine is connected must correspond to the data given on the nameplate of the machine. - If the dishwasher is built into a high cabinet, then it must be secured properly and additionally at the rear.- Install dishwashers intended for flush mounting or built-in installation only under the work plate connecting one Kitchen Cabinet with another and firmly screwed to them. This is the only way to guarantee the stability of the machine. - The dishwasher must be installed so that the mains plug can be easily inserted and pulled out from the socket. - Some models are designed in such a way that the water connection element is located in the plastic casing electric valve, and conductors for electrical connections pass through the supply hose.

Please do not cut this hose or place the plastic housing in water. If the device is not installed in a niche, and therefore access to the side wall remains, then the area around door hinges must be lined on the side for safety reasons. Risk of injury) Cladding panels are special accessories and can be purchased from the After-Sales Service or a specialist retailer.

For daily use. Knives and others kitchen utensils with sharp ends should be placed in the cutlery basket with the points downwards or in the utensil basket in a horizontal position. - This dishwasher can only be used in household and only for one purpose: for washing dishes used for household needs. - You cannot sit or stand on an open car door.

Otherwise, the machine may tip over.- For freestanding dishwashers, be aware that if the baskets are overloaded with dishes, they may tip over.- Do not drink the dishwasher water.- Never add solvents to the dishwashing water. Otherwise, there is a risk of explosion.- The machine door must be opened very carefully while the program is running. There is a risk of hot water splashing out of the machine. - To avoid, for example, tripping over an open dishwasher door, only open it long enough to load and unload dishes. - Follow the safety instructions and correct use shown on the packaging of dishwashing and rinsing agents. - If the machine has a child safety lock, it must be used.

The exact locking description can be found at the end of the instructions, on the cover. - Do not allow children to play with the machine or use it independently. - Keep detergent and rinse aid out of the reach of children. As they can cause chemical burns to the mouth, throat and eyes or suffocation. - Keep children away from the dishwasher when it is open, as it may contain detergent residue. - If the dishwasher is located high up, when opening When closing the door, be careful not to accidentally push children against the cabinet below with the car door. Child safety device to prevent children from opening the machine door (available on some models) Please read the accompanying drawings carefully. Whenever faults - Repair machines and any other manipulations may only be performed by a qualified specialist. To do this, the machine must be disconnected from the network. Unplug the plug from the socket (just do not pull on the power cord!) or turn off the fuse.

Close the water tap. - To avoid accidents, immediately bring in used Appliances unusable.- Return the dishwasher for disposal in accordance with the relevant regulations. A child could climb into the appliance and become trapped inside (Changing Hazard) or other hazard. Therefore, you should: disconnect the power cord, cut and remove network cable. Damage the door latch so much that the door no longer locks. Before washing dishes for the first time. Before leaving the factory, your dishwasher has been subjected to various tests. To remove the water remaining in the machine after testing, you should wash it for the first time without dishes at the highest water temperature.

To do this, load the machine with special salt, rinse aid and detergent through the loading openings provided for them. You will find pictures showing the control panel and internal equipment of the dishwasher at the beginning of the instructions in the cover. In the text you will find footnotes regarding individual items. Washing dishes in the upper basket"4 indication of the end of the program. Check the water supply" *6 indication of "Add salt to soften the water" *7 indication of "Add rinse aid" *8 program selection keys*in some models.

Internal equipment of the dishwasher. What you should purchase in advance: - salt for water softening, - detergent means, means for rinsing. Use only dishes that can be washed in a dishwasher. Device for reducing water hardness. To achieve good washing results, the washing machine must be supplied with soft, almost calcium-free water.

Otherwise, scale will accumulate on the dishes and on the inside walls of the machine. Tap water, the calcium hardness of which exceeds the permissible hardness value must be cleaned of calcium salts before it is used in a washing machine. Water softening is carried out using special salt, which is poured into a device for reducing water hardness built into the washing machine. Device setup and required amount salts depend entirely on the degree of hardness of the tap water. Setting up the device - First of all, you should find out the hardness value of your tap water.

The water management department or the service center will help you with this. - You will determine the setting value from the water hardness table. - Press the program selection key B and, without releasing it, turn on the machine using the main switch 1. After this, the key can be released. Indication 6 begins to flash, the backlight of keys A and B lights up. (On manufacturer the water hardness value was set to two). - To change the setting, press the program selection key B. After each press, the set value increases by one (adjustment range from 0 to 3). If keys A, B and C are lit, this means that the maximum permissible hardness value has been set. If you now increase this value again, the key lights will go out and the water hardness value will be reduced to 0 (none of the key lights will light up). - Switch off the machine using the main switch 1 .

The set water hardness value is stored in memory. Regeneration of the water hardness reducer requires approx. As a result, the water consumption per wash will increase, depending on the device settings, from 0 to max. Water hardness table. Adding salt to soften water.

During washing, the salt is automatically washed out of the container where it is located and into the water hardness reducing container, where it dissolves the calcium salts. The solution containing calcium salts is pumped out of the machine. After this, the system is ready for use again. The regeneration process occurs only if the salt in the water is completely dissolved.

Unscrew the cap of the container 2. Before putting the machine into operation, you must fill the salt storage container with approx.

Operating instructions for Bosch dishwashers, user manual - Mnogodok. For correct operation For different models of Bosch dishwashers, we present instructions for use for them. All manuals are offered in Russian and we hope that you will find what you need in the large list of this brand.

The file can be downloaded, printed and used as a guide to this technique.

The Bosch dishwasher operating instructions will help the user to operate the appliance safely. There is a lot in the manual useful information: from the procedure for unpacking and installing the product to the addresses of service centers.

The most important sections of the document are safety precautions when using the dishwasher, how to operate it, and how to troubleshoot problems on your own.

The most useful sections of the Bosch dishwasher operating instructions are those that relate to the technical characteristics of a particular model and the capabilities of the device.

It is important to prevent the unit from breaking down immediately after purchasing it, so it is better to familiarize yourself with safety precautions before purchasing a complex device.

Instructions are written separately for each model, taking into account their features, including in Russian. Fulfilling the requirements will help the equipment serve for a long time.

Security measures

When receiving the goods, pay attention to the integrity of the packaging: if it is damaged, you need to make sure that the dishwasher body is in good condition.

Before turning on the dishwasher, you should compare the characteristics of the electrical network at the connection point with the data of the device itself: power consumption and required section supply wires. The washing unit must be securely installed and have easy access to the switching point.

During operation, you must follow the established rules:

• Place cutlery point down or horizontally in the dish compartment;
• Do not place heavy products on the open door of the washing chamber to avoid the machine tipping over;
• Solvents can cause the device to explode and are therefore prohibited for use as a detergent;
• It is necessary to disconnect the unit from the water supply and electrical network if necessary to carry out minor repairs.

For different models of dishwashers of the Bosch family, the additional conditions, but the basic rules are the same for everyone.

An ideal option for a safe built-in modification of a dishwasher is Bosch Silence Plus. This model is equipped with an inverter motor, which saves energy. The machine has 5 programs, but the main advantage is rinsing dishes hot water. This effectively removes any remaining detergent. The device has a child safety feature and prevents leaks and damage.

Operational Capabilities

Bosch dishwashers are produced exclusively for home use.

Detergents for them are different:

• liquid;
• powdery;
• gel;
• tableted.

The required dosage is indicated on the packaging.

The program is selected according to the instructions printed on the machine panels, taking into account the number of cutlery, the material from which they are made, and their contamination. Having selected the desired cycle, you can connect the dishwasher. To connect: open the water supply tap, open the chamber door and load the plates, press the power button, select the program and press the key. The program will start immediately after the door slams.

To disconnect the dishwasher, you need to wait until the end of the cycle, when the hatch is unlocked, open it completely and press the off button. Turn off the water supply, wait until the dishes cool down, and then remove them.

Troubleshooting Yourself

If your Bosch dishwasher breaks down, you should definitely contact service center, but first you need to make sure of the complexity of the issue. To recognize a malfunction, the machine program itself diagnoses the problem and displays it on the display in the form of a specific code. A complete list of assigned ciphers and their descriptions are given in the instructions, but those that you can eliminate yourself are here:

1. E4 - indicates problems with the flow switch, one of the reasons for this may be a clogged hose - it needs to be checked.
2. E6 - pops up when the Bosch Silence Plus machine has a problem with the aqua sensor, which is responsible for determining the degree of soiling of the dishes. This happens when the dirty intensive washing program is set for almost clean dishes.
3. E15 - informs about the activation of the aquastop, which is activated when there is a water leak. All hoses should be checked.
4. E17 - signals an error in filling liquid. The cause may be increased pressure at the outlet of the water supply network (inlet to the dishwasher).
5. E24 - occurs when there is poor drainage or no drainage due to clogging or pinching of the hose.
6. E27 - there is low voltage in the electrical network, which happens during peak load hours. In this case, installing a stabilizer will help.

The most common problems are that the machine simply does not turn on, or the connection to the network occurs, but the lights do not blink. The cause of the first malfunction is problems with the connection to the electrical network - perhaps a fuse has blown, or a lock has been triggered. Make sure that the washing chamber door is closed; check whether the water supply hoses, drain filters, and sprinkler nozzles are clogged. Non-blinking indicator lights indicate that no program has been selected, and when the cycle is completed, the unit is still operating.

Maintenance

The duration of any mechanism depends on the quality of service. It is also necessary to monitor the condition of individual devices of the Bosch dishwasher:

1. Detect scale and grease on the rocker arms: if they are detected, run the cycle without loading, with detergent, in intensive mode.
2. Check the condition of the filters after each wash. If necessary, rinse them with hot water from the tap, otherwise the drain pump will be blocked from contamination and the dishwasher will need to be repaired.
3. Wash the sprinklers from scale and food so that the quality of washing does not deteriorate. These devices are removable. For cleaning flow-through will do hot water.

More detailed description care for parts of Bosch washing units can be found in the instructions for use attached to the specific product. Following the instructions in the manual will allow you to use the dishwasher for a long time.

Dishwasher instructions

Dear visitors. To avoid clutter of materials and for ease of navigation through the instructions for household appliances, we have adapted the instructions for related models of dishwashers. For differences in technical characteristics, we have made notes for individual models. If you do not see a special note in the differences separately for the model of your dishwasher, this means that the instructions fully correspond to the model of dishwasher you are interested in.

BOSCH SRV 33A13, SRV 43A23, SRV 43M13 EU, SRV 43M23 EU, SRV 43M53 EU, SRV 43M63 EU



Designations:

= Important
= Note
= Warning

Content

1. Safety instructions

2. Getting to know the car

3. Device for reducing water hardness

4. Adding salt to soften water

5. How to add rinse aid

6. Dishes are not dishwasher safe
7. Placement of dishes

8. Detergent

9. Program overview

10. Washing dishes

11. Maintenance and care

12. troubleshooting

13. When to contact customer service

14. Directions
15. Installation

1. Safety instructions And

Upon delivery

Immediately upon receipt, check the condition of the packaging and the dishwasher itself for transport damage. Never put a damaged machine into operation. In this case, you should contactwith the supplier of your machine.

Please hand over the packaging for recycling to a special collection point.

Corrugated packaging board is made almost entirely from waste paper.

Styrofoam pads do not contain fluorochlorocarbons (FCKW).

Polyethylene (PE) packaging film is made partly from raw materials obtained by recycling waste.

Wooden frames (if any) are also made from remnants of wood and have not been chemically treated.

The strapping material (if any) is made of polypropylene (PP).

During installation

Install and connect the machine according to the instructions given in the installation instructions.

During installation, the dishwasher must be disconnected from the mains.

Ensure that the home electrical protective conductor system is installed according to regulations.

The parameters of the network to which the machine is connected must correspond to the data given on the nameplate of the machine.

If the dishwasher will be built into a tall cabinet, it must be secured properly and additionally at the back.

For flush-mounted or built-in dishwashers, install only under a countertop that connects one kitchen cabinet to another and is firmly screwed to them. This is the only way to guarantee the stability of the machine.

The dishwasher must be installed so that the power plug can be easily inserted and removed from the socket.

Some models are designed in such a way that there is an electric valve in the plastic casing of the water connection element, and conductors for

electrical connections. Please do not cut this hose or lower the plastic cover

in water.

Warning

If the appliance is not installed in a niche and therefore has access to the side wall, then the area around the door hinges should be lined from the side for safety reasons. (Danger of injury)

Cladding panels are special accessories and can be purchased from the After-Sales Service or a specialist store.

During daily use

Warning

Knives and other kitchen utensils with sharp ends should be placed in the cutlery basket with the points pointing down or in the utensil basket in a horizontal position.

This dishwasher must only be usedin the household and for only one purpose: for washing dishes used for household needs.

Do not sit or stand on an open car door. Otherwise the machine may tip over.

In the case of freestanding dishwashers, be aware that if the baskets are overloaded with dishes, they may tip over.

Dishwasher water should not be drunk.

Never add solvents to dishwashing water. Otherwise, there is a risk of explosion.

The machine door should be opened very carefully while the program is running.There is a risk of hot water splashing out of the machine.

To avoid, for example, tripping over an open dishwasher door, it should only be opened long enough to load the dishwasher.and unloading dishes.

Follow the safety and proper use instructions providedon the packaging of dishwashing and rinsing products.

If the house has de T And

If your car has a child safety lock, it must be used. You will find an exact description of the lock at the end of the instructions, on the cover.

Do not allow children to play with the machine or use it independently.

Keep the detergentand rinse aid out of the reach of children. Since they can lead to chemical burns of the mouth, pharynx and mucous membranes of the eyes or suffocation.

Keep children away from an open dishwasher as there may be residues in the dishwasher.detergent.

If the dishwasher is located high up, be careful when opening and closing the dishwasher door to avoid accidentally pinning children against the cabinet below.

Safety device to prevent children from opening the car door (on some models)

Please study the relevant attached drawings carefully.

40 activation of the protective device,

41 opening the door with the safety device on,

42 switching off the protective device.

If a malfunction occurs

Machine repairs and any other manipulations may only be performed by a qualified specialist. To do this, the machine must be disconnected from the network. Remove the plug from the outlet (just do not pull the power cord!) or turn off the fuse. Close the water tap.

When disposing

To avoid accidents, immediately render old household appliances unusable.

Dispose of your dishwasher in accordance with applicable regulations.

Warning

A child could climb into the appliance and become trapped inside (Changing Hazard) or other hazard. Therefore, you should: disconnect the power cord, cut and remove the power cable. Damage the door latch so much that the door no longer locks.

Before washing dishes for the first time

Before leaving the factory, your dishwasher has been subjected to various tests. To remove the water remaining in the machine after testing, you should wash it for the first time without dishes at the highest water temperature. To do this, load the machine with special salt, rinse aid and detergent through the loading openings provided for them.

2. Getting to know the car

You will find pictures showing the control panel and internal equipment of the dishwasher at the beginning of the instructions in the cover. In the text you will find footnotes regarding individual items.

Control Panel

1 main switch

2 door handle
3 "Wash dishes in the upper basket" button

4 end of program indication
5 "Check water supply" indication *

6 "Add salt to soften water" display *

7 "Add rinse aid" display *

8 program selection keys

*on some models

Dishwasher interior

20 upper basket for dishes, with shelf

21 additional cutlery basket for the upper basket *

22 top sprinkler
23 lower sprinkler
24 container for storing salt for water softening, with an indicator that lights up when empty
containers *

25 filters

26 cutlery baskets
27 lower basket for dishes, with shelf
28 retainer

29 container for storing rinse aid, with an indicator that lights up when empty
containers*

30 detergent container
31 nameplate

*On some models

What you should buy in advance:

Salt for water softening,

Detergent,

Rinse aid. Use only dishes that can be washed in a dishwasher.

3. Device for reducing water hardness

To achieve good washing results, the washing machine must be supplied with soft, almost calcium-free water.

Otherwise, scale will accumulate on the dishes and on the inside walls of the machine. Tap water whose calcium hardness exceeds the permissible hardness level must be purified of calcium salts before it is used in a washing machine.

Water softening is carried out using special salt, which is poured into a device for reducing water hardness built into the washing machine. The setting of the device and the required amount of salt depend entirely on the degree of hardness of the tap water.

Device setup

The first thing you should do is find out the hardness value of your tap water. The water management department or service center will help you with this.

You can determine the setting value from the water hardness table.

Press the program selection key IN 1 . After this, the key can be released. Indication 6 starts flashing, the key backlight comes on A And IN. (Water hardness was set to two at the factory).

To change the setting, press the program selection key IN .

After each press, the set value increases by one (adjustment range from 0 to 3).

If the keys are lit A, IN And WITH, this means that the maximum permissible value of rigidity has been set

water.

If you now increase this value again, the key light bulbs will go out and the water hardness value will be reduced to 0 (none of the key light bulbs will light up).

1 . The set water hardness value is stored in memory.
Regeneration of the water hardness reducer requires approx. 4 liters of water. As a result, the water consumption per wash will increase, depending on the device settings, from 0 to max. 4 liters.

Water hardness table

4. Adding salt to soften water

During washing, the salt is automatically washed out of the container where it is located and into the water hardness reducing container, where it dissolves the calcium salts. The solution containing calcium salts is pumped out of the machine. After this, the system is ready for use again. The regeneration process occurs only if the salt in the water is completely dissolved.

Unscrew the cap of the container 24 .

Before putting the machine into operation, you must fill the salt storage container with approx. 1 liter of water. For this purpose, use the supplied salt funnel.

Then load as much salt ( but not cookery!) until the container is full to the brim (max. 1.5 kg). When loading salt, water will be squeezed out of the container and overflow. Therefore, adding salt should always be done immediately before turning on the dishwasher (to avoid corrosion). As a result, the salt solution that gets outside will immediately be diluted with a large amount of water and will end up in the sewer. After loading, remove any grains of salt remaining around the loading hole and close the container with a lid, making sure that it does not warp.

Indication "Add salt to soften water" 6 on the panel will first light up and go out only when the salt concentration in the water is high enough.

When installing the regulator of the device to reduce water hardness to "ABOUT", there is no need to add salt to the device’s container, since it is not used in this operating mode. With settings from „1" before „3" salt is poured into the container.

Warning

Under no circumstances should detergent get into the container for special water softening salt. Otherwise, the water hardness reduction device will be damaged.

"Add salt" display

Water softening salt should be added if this indicator lights up on the panel 6 .

5. How to add rinse aid

Rinse aid is used to keep dishes stain-free and glasses clear.

Only use rinse aid designed for household dishwashers.

Open the lid of the rinse aid container 29 . To do this, press on the marking on the cover ( 1 ) and at the same time lift the cover by grasping its protrusion ( 2 ).

Carefully pour rinse aid up to the very edge of the fill hole.

- The lid should be closed so that you can hear it click into place.
Any rinse aid that has overflowed should be collected with a cloth to prevent too much foam from forming the next time you wash the dishes.

Adjusting the amount of rinse aid delivered

The amount of rinse aid supplied to the machine when washing dishes can be infinitely adjusted. At the factory, the regulator is set to the value 4 .

Indication of the need to add rinse aid

While this indication is on the container lid 29 remains dark, there is enough rinse aid in the container.

Indication of the need to add rinse aid.

6. Dishes that are not dishwasher safe

Not suitable for machine washing:

Wooden cutlery and crockery,

Thin glasses with paintings, antique dishes and dishes with artistic decoration (when washing such dishes in the machine decorative design may get hurt)

Plastic utensils that are sensitive to hot water

Copper and tin utensils.

Dishes stained with ash, wax, grease or paint.

Items that are completely saturated with water, such as sponges and towels.

Painted glasses, aluminum and silverware may become discolored or tarnished when washed in a machine. Dishes made from certain types of glass (for example, crystal) may, due to frequent washing the car becomes cloudy.

In the future, please only buy dishes that are marked as dishwasher safe.

Damage to glass and porcelain dishes

Causes:

Fragile types of glass and porcelain,

Unsuitable chemical composition detergent,

Incorrect water temperature and washing program duration.

Use only glass and porcelain that is specified by the manufacturer to be dishwasher safe.

Use detergents whose packaging states that they do not corrode the surface of the dishes,

Choose a short wash program with low water temperature.

To avoid damage, glassware and cutlery should be removed from the machine as soon as possible after the end of the program.

7. Placement of dishes

Dishes should be cleared of large food debris, such as bones and fruit seeds, but rinsed under running water not worth it. Rinse it first

no need for running water.

Place the dishes in the machine in such a way that:

She stood steady and could not topple over,

All containers were positioned with the opening downwards,

Convex or concave dishes stood at an angle so that water could drain from them,

Both spray arms could rotate freely.

Very small dishes should not be washed in the dishwasher as they may fall out of the trays.

Taking out dishes

To avoid dripping from the dishes in the upper tray onto the dishes in the lower tray, it is recommended to first remove the dishes from the lower tray and only then disassemble the upper tray.

Cups and glasses

Upper basket for dishes 20

Placement of pots

Lower basket for dishes, with shelf 27

Cutlery

Cutlery should always be placed, without sorting, with the concave side down. This will make it easier for the water jet to reach individual forks and spoons. To avoid injury, please place long, sharp utensils and knives on the shelf (available on some dishwasher models) or on the knife rack (supplied as an accessory).

Basket folding bars (on some models)

In order to place pots and bowls more efficiently, the rods can be folded back.

Shelf (on some models)

In some models, lean glasses with stems and tall glasses against the edge of the shelf, but not against the dishes.

Long cutlery such as spoons, salad tongs, ladle or knives also have a place on the shelf where they will not interfere with the rotation of the spray arms. The shelf can be expanded or removed again if desired.

Basket height adjustment (on some models)

Upper basket with side locks (Rackmatic)

Pull out the top basket 20 from the car.

To lower the basket, press alternately on both latches, which are located on the left

and on the right from the outside of the basket towards the inside. In this case, the basket should be held firmly from the side by the top edge so that it does not fall down sharply.

To lift the basket, grab the top edge of the basket from the side and lift it up.

Before pushing the basket back in, make sure that both sides of the basket are in the correct position. same height. Otherwise, the machine door will not close and the upper spray arm will be disconnected from the water circulation system.

Upper basket with twin rollers at top and bottom

Pull out the top basket 20 from the car.

Remove the upper basket and install it on the upper (level 2) or lower (level 1) rollers.

Spray head for washing trays (on some models)

With this spray head you can wash large baking trays or wire racks, as well as plates with a diameter of more than 30 cm (gourmet plates, spaghetti plates, stand plates).

To do this, remove the top basket and install the spray head as shown in the figure.

To ensure that the water jet can reach all the trays, they should be positioned as shown in the picture (max. 4 trays and 2 racks).

The dishwasher should always be operated with the top rack or spray head to wash the trays!

8. Detergent

You can use commercially available liquid and powder branded dishwasher detergents or these products compressed into tablets (but not hand dishwashing detergent!).

Using phosphate-free detergents in hard water can quickly lead to stains on dishes and container walls. white plaque. More detergent will solve this problem.

Whether the product is suitable for washing silverware is indicated on its packaging.

Cell with detergent dispenser

The markings in the detergent compartment will help you load the required amount of detergent:
bottom line: 15 ml

middle line: 25 ml

filling to the brim: 40 ml

If the detergent compartment is still closed, open the lid by sliding the latch 28 .

Load into compartment 30 dishwashing liquid.
Dosage: Refer to the manufacturer's instructions on the detergent packaging.

Important note

Since dishwashing detergents produced by different manufacturers, pressed into tablet form, dissolve at different rates, it may happen that when choosing a short dishwashing program, these detergents do not have time to fully demonstrate their cleaning properties. Therefore, powdered dishwashing detergents are more suitable for short programs.

In the Intensive Wash program (available on some models), it is enough to add only one tablet of detergent.
When using powdered detergents, it is possible that you will have to additionally sprinkle a little powder on the machine door.

If your dishes are only slightly dirty, then in most cases it is recommended to load less

the amount of detergent than that given in the instructions.

Close the detergent container. For this:

1. close the lid of the container,

2. press it until you hear a click.

If you use detergent compressed in the form of tablets, then read on the packaging of the product where you should put these tablets (in the basket with cutlery,

into a container for the product, etc.). Make sure that the lid of the detergent container is tightly closed when using tablets.

ATTENTION! IMPORTANT INFORMATION ON USING COMBINED DETERGENTS

When using so-called combination detergents, which make the use of rinse aid or salt unnecessary, please observe the following instructions:

Some products with added rinse aid are only most effective in certain programs.

For devices with automatic programs, this kind of means in most cases does not give the desired result.

Products that make the use of regenerating salt unnecessary can only be used in water with a certain hardness.

Before using these types of combination products, carefully read the instructions for use of these products or the information on the packaging!

If in doubt, contact the detergent manufacturer, especially if:

At the end of the program the dishes remain very wet.

Limescale deposits form.

9. Program overview

This list contains the maximum possible number of programs.
Programs. available in your dishwasher can be found on the machine's service panel.

Program selection

Taking into account the type of dishes and their quantity, as well as the condition of food residues, you can use the program overview to accurately select the appropriate washing program.

If the machine is not fully loaded, then in most cases you should select a less intensive program than the one indicated in the instructions.

10. Washing dishes

Program settings

Program parameters (duration, water and electricity consumption) can be found in Brief instructions. They were determined during operation of the machine under normal conditions. Because of

Various quantities of dishes,

Fluctuations in the temperature of the water supplied to the machine,

Various water pressure,

Temperatures environment,

Network voltage values

And due to the tolerances of such parameters as, for example, temperature, amount of water, etc., due to the design features of the machine, the actual program parameters may differ significantly from the theoretical ones.

Water consumption values ​​were determined for a given water hardness value of two.

Turning on the dishwasher

Open the water tap completely.

Open the car door.

Turn on the machine using the main switch 1 . The display for the last selected program lights up. Unless another program selection key is pressed 8 then this program is executed.

Close the door. The program execution process will begin.

ABOUTvisual indication during program execution (on some models)

While the program is running, a luminous dot appears on the floor under the dishwasher door. The machine can only be opened when this point on the floor is no longer visible. When the machine is built into the upper niche, when its front panel is flush with the front surface kitchen set, the luminous point is not visible.

End of the program

The program is finished if the program end indication4 and the end program indicator light up. In addition to everything else, a buzzer sounds at the end of the program. This dishwasher function can be changed in the following way:

Open the car door.

WITH and without releasing it, turn on the machine using the main switch 1 .

Release both keys. Program selection key WITH flashes.

To change the setting:

Press the program selection key WITH. Each press of the program selection key WITH switches the buzzer within 4 steps (from “off” to “loud”).

Turn off the main switch 1 , the setting will remain in memory.

Close the door.

Turning off the dishwasher

Some time after the end of the program:

Open the car door.

Turn off the machine using the main switch 1 .

Close the water tap (with the Aqua-Stop system this is not necessary).

Once the cookware has cooled, remove it from the machine.

Warning

To unload the dishes at the end of the program, please open the machine door completely and do not leave it slightly closed. Since it is possible that the steam still escaping from the machine can damage the countertop made of material that is sensitive to water.

Temporary program interruption

Open the car door.

Turn off the machine using the main switch 1 .

All luminous indications go out. The program remains stored in memory.

If the door of a heated machine or a machine connected to a hot water supply is opened, it should first be left slightly open for a few minutes and only then closed tightly. Otherwise, as a result of creating inside the machine overpressure the door may open forcefully or water may pour out of the machine.

To continue the program, press the main switch again 1 .

Close the door.

Final interruption of the program (Reset)

Open the car door.

Press the program selection keys simultaneously A And C and do not release them for about 3 seconds.

Close the door. The program runs for approximately one minute.

Indication of the end of the program and indication of the completed program glow.

Open the car door.

Turn off the machine using the main switch 1 .

Close the door.

Replacing the program

You can still change the program within two minutes after turning on the machine.

If a program change is carried out later, the program steps that have already started (e.g. washing) are completed first.

Note

If the dishwasher is disconnected from the power supply during operation, for example, as a result of switching off or a power failure, then all settings remain in the machine’s memory. As soon as voltage is applied, the machine will automatically start working further.

11. Maintenance and care

Regular inspection and maintenance of your dishwasher will help you avoid problems. This will save you money and nerves.

General state cars

Check for grease and scale deposits on the rocker arms.

If you find such deposits, then:

Load detergent into the designated compartment. Start the machine empty by selecting the dishwashing program with highest temperature heating water.

When cleaning your dishwasher, use only cleaning products specifically designed for this purpose.

The door gasket should be wiped regularly with a damp cloth.

Never use steam cleaners to clean your dishwasher. The machine manufacturer does not accept any liability for any malfunctions that may otherwise occur.

Regularly wet wipe the front panel of the machine and the control panel; All you need is water and a little dishwashing detergent by hand.
It is best to avoid using rough sponges or abrasive cleaners as both of these cleaning agents may leave scratches on the surface of the machine.

Attention!Never use other chlorine-containing household cleaning products! This is dangerous to your health!

Special salt for water softening

Follow the indications 6 , indicating the level of salt filling in the container. If necessary, salt should be added.

Rinse aid

Keep an eye on the indicator at all times 7 . If necessary, rinse aid must be added.

Filters

Contaminants deposited on filters 25 , can lead to clogging.

After each dishwashing, check the condition of the filters.

Unscrew the sieve cylinder and remove both filters. The filters are firmly connected to each other and cannot be disassembled into individual components.

Remove large dirtand rinse the filters in running water.

Assembly:

Place the filters in place and secure them with a sieve cylinder.

Sprinklers

Sprinkler holes and bearings 22 And 23 may become clogged with scale and other contaminants carried by water. Therefore, the following measures must be taken:

Constantly check whether the openings of the sprinklers are clogged with food debris,

If necessary, lower spray arm 23 remove through the top

Top sprinkler 22 unscrew it,

Rinse both sprinklers under running water,

Put the sprinklers back on and fix or screw firmly.

12. Troubleshooting

How to fix minor problems yourself

As experience shows, you can fix most of the malfunctions that arise every day during the operation of the machine yourself, without calling the service department. This way, firstly, you will avoid unnecessary expenses, and secondly, the washing machine will be at your disposal again. The recommendations below will help you find the cause of the malfunction.

Problems

Attention

Do not forget: repairs to the machine should only be carried out by a qualified specialist. If there is a need to replace any part, please ensure that only original spare parts are used. As a result of unqualified repairs or the use of non-original spare parts, it is possible that the user will suffer significant material damage and his life may be in danger.

...when turned on

The machine does not start working.

The fuse is bad.

The plug is not inserted into the outlet.

The car door is not completely closed.

The water tap is not open.

The filter in the water supply hose is clogged.

Turn off the dishwasher and unplug it from the outlet. Close the water tap. After this, clean the filter located in the supply hose connection element. Finally, plug the machine back in, turn on the water tap, and turn on the dishwasher.

Problems with the car itself

The lower spray arm is difficult to turn.

The spray arm is blocked by small dishes or food debris.

The lid on the detergent container does not close.

The measuring container is full.

The closing mechanism does not work due to adhering detergent residues.

After starting the machine, the control lights flash.

No program selected.

At the end of washing the dishes, the indicator lights do not go out.

The car is still on.

The “Check water supply” indicator lights up 5.

The water tap is closed.

The water was turned off.

The supply hose is kinked.

- The filter in the supply hose is clogged.

Residue of detergent is stuck to the walls of the detergent container.

When adding the detergent, the walls of the container were wet (the detergent should only be poured into a dry container).

At the end of the program, water remains in the machine.

Drain hose clogged or bent.

Evacuation pump waste water blocked.

The filters are clogged.

The program is not finished yet. Wait for it to finish.

Execute the function "Reset".

For built-in dishwashers, the door does not open/close correctly.

The panel attached to the car door is not heavy enough. It is necessary to adhere to the panel weight givenrefer to the installation instructions included in the package.

The door spring tension is not adjusted correctly. Adjust it as described under point 26 in the supplied installation instructions.

Washing problems

Unusually strong foaming.

Instead of rinse aid, the machine was filled with hand dishwashing detergent.

Detergent spilled past the special compartment when washing dishes can contribute to the formation of excessive foam, so it should be removed with a cloth.

The machine stops during the washing process.

The power was turned off.

The water was turned off.

Execute the function "RESET".

When the machine is running, knocking sounds are heard.

The spray arm hits the dishes.

The machine makes a knocking noise when running.

The dishes in the machine are not positioned correctly.

Impact sounds can be heard from the filling valves.

These noises are relatedwith the laying of a water supply system, which does not have any effect on the operation of the machine. It is impossible to eliminate these noises.

...on dishes

Dried food remains are visible on the dishes here and there..

The dishes were not positioned correctly, so the water jets could not reach their surface.

The dish basket was overflowing.

The elements of the dishes were superimposed on each other.

Too little dishwashing detergent was loaded.

A program that does not wash dishes too intensively has been selected.

Dishwasher Bosch SPV50e00eu: installation and operating instructions in Russian. Here you can read and download the instructions for the Bosch SPV50e00eu dishwasher. She belongs to model range Bosch Silence plus dishwashers, instructions for which are sometimes searched for without indicating the model name.

Bosch SPV50e00eu: installation and use instructions

Contents of the instructions for the Bosch SPV50e00eu dishwasher

Instructions for the Bosch Silence plus dishwasher (SPV50e00eu): warnings

Bosch Silence plus: operating instructions

Before putting the Bosch Silence plus (SPV50e00eu) dishwasher into operation, you must read the instructions carefully. In it you will find important information on installation, installation, operation, maintenance and maintenance dishwasher Bosch Silence plus (SPV50e00eu). This information will help you use your dishwasher safely and keep it in good condition longer. in working condition, avoid many breakdowns and eliminate minor faults if they occur. Besides, right choice operating mode of the Bosch Silence plus dishwasher (SPV50e00eu) will allow you to carefully care for your dishes and cutlery.

While the Bosch Silence plus (SPV50e00eu) dishwasher is operating, the instructions advise you to refrain from opening the door. If you have to open it, be careful: hot water may splash out of the machine.

In the operating instructions for the Bosch Silence plus dishwasher (SPV50e00eu), an entire section is devoted to warnings associated with using the appliance in a home with children. The instructions for Bosch Silence plus (SPV50e00eu) recommend locking the machine during use if there is a lock. In addition, children should not be allowed to play with the machine even during idle time - the detergent may be too aggressive for children’s skin and mucous membranes, children’s fingers may get stuck in small holes in the machine, and the water is not suitable for internal consumption. In addition, some plastic parts devices may be broken as a result of gaming.

If your dishwasher breaks down, entrust the repair to specialists. First of all, disconnect the device from the electrical network and turn off the water supply tap. Then call the service technician.

Both comments and pings are currently closed.