Children's wardrobe from an old wardrobe. Remaking old furniture with your own hands (65 photos): original ideas

Soviet-era furniture - walls, cabinets, chests of drawers - is not beautiful, but reliable and strong. Well, I just can’t bring myself to take it to the landfill. And rightly so. It is very easy to update it, giving it a completely new sound and modern look. Remaking cabinet-type furniture may not be very difficult: there are materials that allow you to significantly change with little effort appearance. Most easy way— change color and accessories. Everything is clear with the fittings - choose what suits your style best, and the color can be changed in two ways - paint and glue film (or wallpaper).

Remaking an old wall: changing the design

Covering old furniture with self-adhesive film is the easiest option for changing the decor. Film is available today in both plain and color, different colors, textures and shades. There is no point in gluing a film with a wood pattern; otherwise, it is in trend today. But plain or with a pattern - this is what can turn an old wall into new furniture. The steps are simple, but the work requires accuracy. But the result is excellent. See two photos. The first one shows the old Soviet wall before the renovation, the second one shows it after.

Updating an old furniture wall - before and after

Now about how it was updated. Compacted furniture self-adhesive film was used, cream color, matte surface. The open part of the old wall was closed with glass doors, and translucent glass was used for the glass. matte film. The edging is furniture layout (also self-adhesive) chrome color. The order of work is as follows:

• Everything that can be removed, you remove and disassemble. Remove old fittings.
• Surfaces must be clean and free of grease. This can be achieved more easily by using a soft cloth soaked in detergent for dishes. Then everything is washed away warm water with a little vinegar. Wipe with a dry cloth.
• Cut out the details. It is better to cut the film 8-10 mm larger. The remains are then cut off with a paper knife.
• Spray the part to be glued with water from a spray bottle. On a wet surface, the film can be moved if something goes wrong. You can even peel it off without damaging it.
• After removing the protective layer from the film, carefully lay it out. Once leveled, begin to smooth soft cloth from the middle to the edges. Try not to have any bubbles. To do this, you need to move gradually, without jumping from place to place.
• If there is still a bubble, you can pierce it with a thin needle approximately in the middle. Then expel air from the edges of the bubble to the hole and rub the puncture site.
• Having glued the film, take a clean thin cotton cloth, spread it on top and iron it with a warm iron (medium heat).
• We glue the trim and install new handles.

This is the sequence of work with every detail. It’s the same with glass, you just need to glue it to the inner surface. After assembly you have a renewed wall. This technique can be used for any item: chest of drawers, bedside tables, wardrobe, etc.

For example, after a successful experiment with the wall, they redid it in the same way old wardrobe and added it to the right. Now the entire wall is occupied. You can also update your kitchen set by gluing self-adhesive film and replace the handles.

There is a second way. It is a modification of the proposed method, but it is simpler and not so labor-intensive. Only the doors are covered, not with film, but with non-woven wallpaper. The wallpaper is glued with PVA glue. To prevent the edges from riding up, the parts are cut 5 mm smaller on all sides. It turns out a kind of edging. Everything looks good (example in the photo below).

What's good about this method: it's easy to change the decor. Tired of the old appearance, they tore off the wallpaper and put on new ones. Despite the fact that the method seems frivolous, the appearance is maintained for several years. Its author even tried it on kitchen set. Only the wallpaper on top is coated twice with PVA glue. In this case, the cabinets can be washed. It is important to apply the varnish layer evenly, without sagging; there are no other difficulties.

Sometimes wallpaper is varnished. But before you do this, try it on a scrap piece: see how they react to it.

When choosing a varnish, you need to remember that acrylic and cellulose varnishes remain transparent after drying, while polyurethane varnishes turn yellow after time. Also, polyurethane is almost not softened by solvents: it can only be removed mechanically (from wood - cleaned with sandpaper).

Dresser update

The old chest of drawers had stood for who knows how many years in the attic, but it was very strong and reliable, it had not dried out one bit, only the polish was cracked. It is much stronger in strength than modern products. This is a feature that is inherent in old, Soviet-era furniture. It's not very detailed (to put it mildly), but after standing in poor conditions for several decades, it remains strong. Remaking a chest of drawers is more complex: two techniques were used: painting, and then decorating using polyurethane moldings and wallpaper.

Step 1. We remove the fittings and remove the old coating. In some places the polishing was scraped off, in others it was sanded with sandpaper. The chips were covered with wood putty and waited until it dried. At the final stage, everything was cleaned with fine-grain sandpaper. At the same time, the chest of drawers became the same as in the photo below.

This is after it was puttied and leveled sandpaper

Step 2. Installation of polyurethane moldings. When choosing moldings, make sure that they are not bulky: too thick ones will look very rough on a small chest of drawers. They should be no wider than 5 cm and as narrow as possible when looking at them in profile.

The purchased polyurethane moldings were carefully cut, the corners were filed at 45°. (). The pattern match must be perfect. We glue them on PVA. For reliability, you can additionally secure it with screws with wide heads. A small recess is made under them, after the self-tapping screw is screwed in, the hole is covered with putty. Try to ensure that the putty immediately lays down perfectly (you can correct it with a wet finger), since it is problematic to clean off dried putty.

Moldings are glued and mounted on self-tapping screws

Step 3. Everything is treated with a primer. You can use PVA glue diluted with water in a ratio of 1:2. After the primer dries, paint (two layers). For this case, acrylic paint was chosen water based. The color is coffee with milk, although it looks completely different in the photo. Color rendering is inaccurate.

This is after the second application of paint. Cute

Step 4. For decoration, wallpaper was chosen whose coating was made using the silk-screen printing technique. Pieces are cut to the size of the inside of the frames from the moldings and glued to PVA. After the glue has dried, the entire chest of drawers is coated twice with water-based varnish.

Step 5. And the last to be installed are new legs (furniture wheels) and handles.

We install the handles and legs)) The updated chest of drawers is completely different from the one you saw in the first photo.

As you can see, there are no difficult jobs. Everything is really elementary. But all processes require accuracy - the appearance depends on it. You can also update an old wardrobe in the same way. Get a set for the room. Stylish and original.

When updating furniture, the worst thing is if the surface is varnished. The varnish takes a long time and is difficult to remove. If the surface is smooth and the polishing is not damaged, you can apply primer for complex surfaces and paint after drying. This greatly speeds up the process of painting lacquered furniture.

If you have children and a cottage or yard, you may be interested in reading with a lot of photos. And about

How to update an old nightstand

In the photo gallery below you can see the process of restoring an old polished bedside table. First, the old polish was removed from it, puttyed, sanded and after processing it was painted twice acrylic paint. Then paper with an interesting design was glued to the doors (it was a gift paper bag). Once dry, the whole thing was coated with two coats of semi-gloss acrylic varnish.

The sequence of work is not difficult if you know how to do it. All processes will repeat the sequence of actions that you saw in the example of updating the chest of drawers. The result is also impressive.

Remodeling furniture with your own hands is a painstaking task, but the result is worth it. Below is a photo of a bedside table restored using a simple method: it is covered with embossed wallpaper, and varnish is applied twice on top.

Table makeover

Using the same technology, banal Coffee table can be turned into modern item interior IN in this case it was covered with wrapping paper. It is dense, adheres well and does not become limp when applying varnish.

Before starting work on decorating the table top, the legs of the old table and the edges of the table top were painted light color: this way it fits better with the new design style. Then the process of its transformation began.

When pasting, the panel is cut out significantly larger than the dimensions of the tabletop. It's necessary. The paper is glued to PVA and rolled with a roller so that there are no lumps or blisters. The surface must be absolutely smooth.

After gluing, take sandpaper with fine grain (it is more convenient to work if it is attached to a block). By running it along the edge, they bend and at the same time separate the excess paper.

Even cutting with a guillotine will not give you a fairly even edge. And with this method, it turns out professionally designed. There is no smell of amateur activity.

After the glue has dried, the surface is coated twice with a thin layer of varnish. It should be applied with a soft brush in a small amount. Layers are applied in different directions: first along the long side, then across.

Furniture remodeling: photo ideas

Remaking furniture with your own hands is a creative endeavor. Even something boring can be made into something great thing. And it is not at all necessary to repeat exactly what you saw. A lot of useful ideas comes during the execution of the “project”. It’s just a pity that some of what was planned turns out to be not as attractive as it seemed. Try it, experiment. Good modern technologies allow this to be done at minimal cost.

Buy new wardrobe, when the previous one is still quite functional there is no need. If the doors no longer look presentable, or you have changed the interior and the old cabinet does not fit in, change it beyond recognition! All the methods that we list below are suitable for both sliding wardrobes and chests of drawers and even shelving with alternating open and closed sections.

Cover with film

Self-adhesive film will help hide all the imperfections of cabinet doors or dresser drawers in a couple of simple steps. The range of films is huge, you can choose one color or with an interesting pattern, golden or imitating wood. Do not forget to degrease the surface before application, or even better, sand it and cover it with a layer of primer.

Wallpaper

Wallpaper provides more options than film, since it comes in matte, textured, and generally suits every taste. If you wish, you can choose photo wallpaper that will visually expand the space. Wallpaper is applied using PVA; the surface must be prepared in advance for better adhesion. You can decorate not only the front doors with wallpaper, but also the interior shelves or back wall cabinet or rack.

Cover with fabric

This method gives a smoother, more textured look than wallpaper. It is better to cover large elements such as wardrobe doors with fabric, fasten them with a furniture stapler or with glue. It is interesting to choose leatherette as a fabric for a luxurious look.

Fabrics made from pieces using the patchwork technique will make your closet more comfortable and will help you fit it into a child’s room or into styles such as Provence and country. The style can be embodied with wallpaper or film if you cover the panels of the drawers with materials with different patterns.

Paint

Paint will be a real savior in furniture restoration. Before applying paint, sand the surface and coat with primer.

You can simply paint the cabinet in 1-2 colors, or you can paint a real picture on it. If you don’t have enough artistic skills for painting, you can make a drawing using a stencil. Geometric lines and shapes can be easily created using masking tape - it will serve as a smooth border for the paint. And for more complex patterns and the stencil for pictures will have to be made specially.

We talked about ways to transfer images to surfaces here:. And at this link detailed instructions on using stencils:

Make a slate surface

Stick rivets

To create a brutal effect for a loft or, cabinet doors can be decorated with metal rivets or brackets. Nails with decorative heads will also work. Let the chest of drawers look like antique chest, and the wardrobe is on the door in submarine. You can use other metal fittings for decoration, and support the style by painting or covering it with fabric.

Make the doors mirror

Mirrors not only expand the space and add light to the room, but also hide surface imperfections. Any closet can be turned into a mirrored one by attaching one full-height or several small mirrors to its doors. This technique will help you create an Art Deco style cabinet.

Alternative option- a mirror mosaic that will create wonderful reflections.

Add volume

If you want to achieve classic look your closet, you just need to stick it wooden slats or stucco, and then paint - and the effect will add up. You can paste an inscription cut out of wood with words that are meaningful to you or the name of the contents of the box.

A voluminous texture can be created with colored sawdust or other similar material: the door is covered with glue, and the sawdust is inflated on top, then everything is secured with spray varnish. Please note that such a surface is very difficult to clean.

Do not forget that the appearance of furniture is greatly influenced by fittings. In any case, it is worth replacing the handles, and maybe this will be enough. Lighting can also enliven the familiar look of a cabinet or shelving unit.

Photos: bohemianjunktion.com anangelatmytable.com, decorpoint.com, fondodejuventud.org, theroomedit.com, hfapconference.com

Furniture decor is creativity that does not like fuss. You've been thinking for a long time about how to update an old wardrobe, but you were afraid of ruining an out-of-fashion or familiar piece of furniture. let's consider different variants, ideas and techniques and choose something for ourselves. Simple wardrobes and sliding wardrobes may have similar decor, but as for a simple old wardrobe that has lost its former luster: you can make a unique piece out of it.

Decor options

You can make your own cabinet decor using interesting ideas and all kinds of techniques. Some of them, such as photo printing or color film, do not require special skills. And not everyone can do such things as matting or stenciling; certain skills are needed. Let's figure out what will help us decorate the closet and wardrobe:

• Photo printing or photo wallpaper.
• Colored stained glass film and vinyl stickers.
• Frosting of glass or mirror.
• Vinyl or regular wallpaper.
• Decorative plaster (screening).
• Restoration and painting.

Photo printing or photo wallpaper

This technique is most often used to decorate wardrobe doors. Large format printing has long been used in interior design. A special printer uses a special printer to apply a design to paper or any other surface. The inconvenience is that this is an expensive service and you need to look for a special workshop for making photo printing. Photo printing on glass is called a tabernacle.

There are more a budget option- this is a photo wallpaper. Sold in construction stores or online stores. The cost is 300 rubles. and higher, depending on the size. The subjects of photo wallpapers are very diverse, from landscapes, flowers, animals, to fairy tale characters for a children's wardrobe. When gluing, use starch-based glue, so you can later remove the old design and change it to another.

The video shows how to properly place photo printing on glass:

Stained glass film and vinyl stickers

This is something that you can quickly, without special skills, stick with your own hands on the surface or glass of a cabinet or wardrobe. Add some presentability to your closet. Stained glass films are at the peak of fashion today. They can be bought both in online stores and in specialized repair hypermarkets.

Except beautiful decor, the film protects the wardrobe and just the wardrobe from damage. The stickers and film are very easy to remove.

No one will distinguish your imitation from a real stained glass window.

The cost of stickers depends on the size; this is an inexpensive decor. The self-adhesive base of stained glass film for glass allows you to often change the surroundings with your own hands.

Matting glass or mirror

Used for glass and mirror cabinet fronts. More suitable for a wardrobe. Industrial matting involves removing the top layer of a mirror or glass. This results in several levels and a three-dimensional image.

You can frost glass or mirrors with your own hands using a special paste. To work you will need a stencil and a rubber spatula. Place the stencil on the surface and apply the paste to it with a spatula. Leave for a while, according to the instructions. When using paste with abrasive, you need to rub the glass along the lines for about an hour. Wash off the remaining paste with water.

Video master class on matting:

Vinyl or regular wallpaper

You can update your closet with your own hands using wallpaper. This cabinet decor is suitable exclusively for old wooden or “Soviet” furniture. But this is good, solid furniture, it can still serve and please us. Simple ones are more suitable for decoration. paper wallpaper, since it is easier to coat them with glue and glue them. And the price of simple wallpaper is cheaper and lighter than vinyl. U simple wallpaper There are two drawbacks: they are not durable and the design is usually not interesting.

Vinyl wallpapers come on paper or non-woven backing. They are heavier than simple ones, vinyl with paper base glue better with glue based on starch, and with non-woven material - Methylane Vinyl glue.

Before applying wallpaper, be sure to degrease the surface. This can be done with alcohol, gasoline, or acetone.

Do not forget to press more firmly with a dry cloth or sponge and straighten the wallpaper so that the paper does not wrinkle.

Decorative plaster master class

This technique, with which we will decorate the cabinet, is called stenciling. With help decorative plaster and stencils we will get three-dimensional decorative elements. They can subsequently be painted in any color, gilded or tinted to suit your taste.

To work you will need:

1. A stencil made of plastic or vinyl, or cardboard.
2. Decorative plaster.
3. Flat spatula.
4. Painting tape.
5. Old wardrobe.
6. Acrylic paint.
7. Sandpaper.

If the product that we will decorate is covered with old paint, it is necessary to sand the entire surface with sandpaper. We process until the wooden base becomes visible. If your old cabinet is not painted, then everything is simpler: remove it with sandpaper upper layer, remove dirt and old fat. If you see cracks in the wood, it is advisable to cover them with putty. We take our ready-made stencil or one made from cardboard and attach it to the surface of the cabinet door with masking tape.

Then we let the plaster dry, go over it with sandpaper and cover the entire cabinet with acrylic paint in several layers. Acrylic will not only decorate the closet, but also protect it from destruction. Between painting, give the cabinet time to dry. At the end of the work, coat the surface with varnish.

In the video, work with decorative plaster:

Cabinet decor master class

In our master class we are updating an old wall from Soviet times. See how your closet will be transformed after this decor.

To work you will need:

1. Old wardrobe.
2. Acrylic enamel paint.
3. Acrylic varnish.
4. PVA glue
5. Brush and paint roller.
6. Coarse and fine sandpaper.
7. Paper wallpaper.
8. Gold paint.
9. New fittings.

We disassemble the old closet and take out the drawers. Let's take it grinder or sandpaper and process the surface of the parts. If you process with sandpaper, then do it first with coarse sandpaper, and at the end go through it with finer sandpaper.

Apply acrylic paint first in the corners with a brush or sponge, and then over the entire surface with a roller. You need to paint 3-4 times until the dark color disappears. Next, we decorate the drawers: use a brush and white acrylic to paint the front sides of the drawers. We are waiting for it to dry. Next, apply masking tape to finish decorative element gold paint.

We paint the decorative element with gold paint. We paint all the boxes with white acrylic paint and dry them. We remove the tape. Next, we proceed to wallpapering. Wallpaper is the simplest, paper. Cut into strips, spread with PVA glue and carefully glue. Make sure that the wallpaper sticks tightly, press it with a sponge.

Very often we throw away an old wardrobe, but before throwing away an old wardrobe, you need to think carefully, because you can give it a second life.

For example, an old wardrobe can be restored by using varnish, paint, film, then it can be beautifully decorated or painted, varnished and placed in the living room, kitchen, hallway or nursery. It all depends on which room needs additional cabinets, as well as on the interior.

If you don’t want to bring life back to an old closet, then you can remake it, for example, you can make a table out of it for a child. An excellent option would be to make for the kitchen beautiful shelves to place the dishes.

If the closet is large, you can divide it into parts and make small cabinets for different rooms. You can make a beautiful chest of drawers from an old wardrobe or coffee table, you can make a TV stand.

If there is no work space, then the closet can easily turn into a computer desk.

The cabinet can be taken to the pantry and arranged. The cabinet will serve as shelves for different cereals. You can make shelves for shoes from a closet, or make a greenhouse for flowers.

There are many options for creating something new and interesting from a closet, the main thing is to figure out what you want to make from it.

Old furnishings may vary high quality, long service life and attractive appearance. The upholstery may become worn or the armrests may become dirty, but they will still be reliable and durable. In order not to throw away these items, reworking is considered optimal old furniture with your own hands, before and after photos confirm the feasibility of the work. The procedure will improve the appearance of the products, making them ideally match the existing interior style. For this they can be used different techniques, and many methods can be easily implemented with your own hands.

There are many different ideas remodeling old furniture. The choice of a specific method depends on the skills of the owner of the piece of furniture. Depending on the chosen technique, the tools and materials that will be used during work are determined.

Old furniture is restored different ways, but first you need to make sure that it is really in good condition, no rotted or warped areas.

Rework methods and work technology

You can remake old furniture with your own hands different methods, and each has its own technology and features. Most methods can be easily implemented independently, even without the appropriate experience or skills. To do this, you just need to study the instructions, as a result of which old things can easily be turned into original designs.

Painting

This method is chosen for various wooden interior items, which include tables, stools, chairs, walls, cabinets or other cabinet furniture. Due to the long service life, various abrasions may appear on the surfaces. Also due to exposure to moisture or high temperature old paint may burst and crumble. For furniture, it is advisable to choose water-based paints, as they are safe for residential premises and have good durability.

The most commonly chosen compositions are:

• Acrylic paint, characterized by ease of use, fast drying and lack of unpleasant odor;
• Thixotropic paint with a dense structure. After it dries, the result is a coating similar to plastic surface. It is convenient for beginners to work with the material, since there are no streaks left when applying the composition.

Before purchasing a certain paint, be sure to study the instructions to make sure that the composition is intended for use in residential premises and not outdoors. Do-it-yourself remodeling of an old Soviet wall or other furniture using painting involves performing successive steps:

• The furniture is disassembled into its component parts, the doors are removed, the drawers are pulled out and the fittings are unscrewed;
• Mirrors and glass, as well as other surfaces that do not need to be painted and cannot be removed, are sealed with masking tape;
• All parts are thoroughly washed with water and detergent;
• Wear safety glasses and a respirator;
• The surfaces of all elements are protected, for which it is recommended to use fine-grained sandpaper;
• The parts are coated with a primer;
• If various cracks or chips are found, they are filled with putty;
• The acrylic primer is applied again, after which you again need to walk a little over the surface with sandpaper;
• Remove dust with a brush or vacuum cleaner;
• If you bought paint in a can, then it is sprayed at a distance of 30 cm from the surface, and smooth movements are made during work;
• If you buy the composition in a can, then it is poured into a pre-prepared tray, after which it is applied to the surface of the furniture with a brush or roller;
• If there are hard-to-reach areas, they are painted with a brush;
• For bright, uniform and beautiful coating It is advisable to apply paint in three layers;
• After the composition has dried, varnish is applied, which can be glossy or matte;
• Finally, remove the masking tape from the mirrors or glass.

You should only work with paint when open windows for ventilation, and it is also advisable to cover the floor with some newspaper in advance so that the paint does not get on flooring. Photos of items before and after remodeling old furniture with your own hands allow you to see how the appearance of the structures changes. They look updated, sophisticated and stylish.

We disassemble furniture

We wipe furniture coverings

Grouting with sandpaper

Cover the cracks with putty

Processing the coating with sandpaper

Painting the surface

Cover the surface with varnish

Film

Ideas used to renew and remodel furniture include the use of a special decorative film that covers different surfaces piece of furniture. This method is ideal for walls, cabinets and even household appliances.

Modern films used for old furniture may have different images. They are easy to use, durable and can withstand a variety of mechanical influences. They can even be used in the kitchen, as they do not deteriorate when the temperature changes or is exposed to water.

Step-by-step instructions for remodeling furniture using film:

• The surfaces of the interior item that will be covered with this material are prepared. They must be cleaned and coated with a degreasing compound;
• Purchase a roll of self-adhesive film of optimal width;
• The material is cut out in accordance with the dimensions of the furniture surfaces;
• The protective material is removed from them, after which they are applied to the desired areas of the interior item;
• The film is leveled with a spatula to completely eliminate bubbles;
• The edges are aligned and the excess film is trimmed off with a utility knife.

Thanks to this method, old furniture is turned into interesting design, having a beautiful appearance with different images or patterns. The process does not require the investment of numerous funds and time, and is accessible to each person independently.

Processing the coating

Removing the protective table

We glue the film on one side

Removing air bubbles

Aging

When renovating an apartment, many people prefer to stick to a certain style. If you choose a Provence or country style, then you need to remake the old furniture to suit the conditions and requirements of these directions.

Designers highly value antique vintage furniture, so some interior items need artificial aging, which will give them sophistication. This remaking of old Soviet furniture is considered simple process, for which special compounds are used. The following materials are often selected for these purposes:

• Antique wax – it is effective for wood structures. Before using it, all surfaces are cleaned and degreased. Afterwards the stain is applied, which dries in about 7 hours. The remaining product is wiped off with a sponge. Next, antique wax is rubbed into the surface, giving an antique look to any furniture. Patterns and various monograms are applied on top with acrylic paint. At the end of the work, the structure is varnished;
• Acrylic paint - this product can be used not only for wooden furnishings. It effectively ages old or modern designs made of plastic or metal. The desired effect is obtained by combining two colors different shades, differing from each other slightly. Before work, prepare the surface, which must be clean and smooth. Several layers of these two paints are applied sequentially, and for high-quality aging it is necessary that each layer dry completely. After the coating has hardened, in some places it is advisable to go over it with sandpaper, which partially erases the paint, which ensures that the objects have an antique look.

Furniture converted in this way looks elegant, aristocratic and luxurious.

Apply a base coat of paint

Drying the paint

Rub the surface with paraffin

Apply putty

Apply a second coat of paint with a sponge

Sanding the coating

Applying patina

Padding

High-quality upholstered furniture can last more than 30 years, but it quickly loses its attractiveness due to wear and soiling of the upholstery. In order not to spend money on the purchase of expensive structures, reupholstery is carried out, which allows you to update the appearance of the sofa or chair. We remodel furniture in such a way that the new upholstery is of high quality and durable, so a lot of attention is paid to its selection. The material must be:

• Durable;
• Dense;
• Easy to clean from dirt;
• Maintains its shape over a long period of use;
• Impregnated with dirt-repellent and waterproof compounds.

Often leather or flock is chosen for upholstering furniture, as well as tapestry or jacquard. Master class on remaking an old one upholstered furniture consists in implementing the following steps:

• The structure is disassembled into separate parts;
• Using round-nose pliers, remove the staples that secure the old upholstery;
• The fabric is removed;
• Patterns are created from old upholstery;
• New elements of upholstery material are cut from them;
• The seams are sewn on a machine;
• The upholstery parts are applied to the required parts of the furniture, and then secured with staples;
• During work, you need to make sure that there are no sagging or folds;
• The material is nailed to the frame with small nails or steel staples, the distance between which is 2 cm;
• After work, the structure is assembled.

A photo of the finished result of remodeling furniture shows that after reupholstering, its appearance radically changes, it looks updated and can last for a long time.

We disassemble the components of furniture

Cutting off necessary elements fabrics

Sewing fabric details

We fasten the fabric with a powerful stapler

Stretch the fabric

Decoration options

There are many more different ideas used to decorate different old furniture. Their use provides the possibility of further use of structures in modern interiors. These methods include:

Thus, the refurbishment of old furniture can be carried out according to different technologies. They differ in the materials used and the result of the work. Many technologies can be performed independently, but it is important to choose quality materials and carefully approach the work to obtain updated, sophisticated, luxurious and vibrant furniture.

Veneering