Bedroom under the ceiling: to be or not to be. We hang a bed under the ceiling Sleeping place under the ceiling of an apartment

Proper placement of furniture in a small room will highlight the chosen interior style. A bed under the ceiling frees up space for installing upholstered or cabinet furniture, including a sofa, wardrobe and desk.

Advantages of placing a sleeping place under the ceiling:

• Competent optimization of living space.
• A variety of designs and the possibility of making a bed according to an individual project.
• Installation of fixed furniture models with additional fall protection.
• Furniture can be placed anywhere, focusing only on the height of the ceilings.

Sleeping area, built under the ceiling, is suitable for arranging a small living room. Under the bed there is a work area or cozy corner for relax. In the children's room you can additionally equip a playground.

When installing a bed, you should consider:

• Financial expenses. The design is considered expensive because its installation requires careful preparation space.
• Personal needs. Some people are afraid to sleep at heights, so such beds can cause not only a feeling of fear, but also physical discomfort.
• Safety precautions. The sleeping place under the ceiling is prohibited for small children. Beds must be equipped with bumpers and other protective equipment.
• Visual reduction of free space in the room.
• The need to install additional lighting, which is mounted in the base of the bed.

IN classic interior the furniture under the ceiling looks out of place. It is more suitable for mixed or modern design premises, especially when it comes to the minimalist style.

How is a bed built under the ceiling?

The furniture placed under the ceiling is multi-component, so the reliability and safety of the structure depends on the skills of the specialists involved in the installation. Installation should only be carried out by professionals. A popular option for a sleeping area built under the ceiling is the mezzanine bed. Designers develop a drawing of this structure, focusing on the structure of the frame, decoration options and maximum loads. The functionality and comfort of the bed is influenced by the selection of the mattress.

Frame components:

• Rovnaya wooden surface, which is used as a base for a bed. It is recommended to use pre-finished solid hardwood without any rough edges or sharp corners. If the bed is intended to complement the hi-tech, loft or techno style, the frame is made of metal.
• Sides to protect against falls while sleeping. The headboard is also additionally used as a fence. Some owners of furniture under the ceiling refuse limiters, thereby ignoring safety precautions.
• Fastening elements for fixing the structure to the walls and ceiling. It is possible to install a bed between two walls or in a corner (combined mounting to the ceiling and wall).
• A wooden, metal or rope ladder that is securely attached to the body.
• Additional base made of lamellas, plywood or chipboard. It is installed in the area where the mattress is laid to increase the orthopedic properties of the bed.

There are no special restrictions in terms of decorating the bed. For example, you can install a bed, traditional for a Russian hut, which is placed between the ceiling and the stove. This option for arranging a sleeping place is suitable for country houses, made in ethnic style. IN modern apartments designers recommend using carved metal or wooden sides for decoration, stylish stairs and fine linens.

The frame is assembled directly under the ceiling at a height of about 250-300 cm, so the structural components are developed according to the drawings, based on the layout of the room. Upon completion of installation, the reliability of all connections is checked.

The sleeping place can be designed in the form of a pedestal, leaving space near it for installing accompanying furniture, including bedside tables and drawers for storing things. In this case, the design is designed for increased loads in the region of 800 kg. If we are talking about arranging exclusively a place to sleep, which can be occupied by several people, the bed must withstand 300 kg.

Furniture built into the ceiling will become interesting and unusual solution for furnishing the interior of a living room, master bedroom or children's room. The design must be safe and comfortable, especially if it is intended for a child.

How to choose a place to install a bed under the ceiling

A comfortable ceiling bed has one or two sleeping places. If the base for the mattress is placed without a pedestal, its dimensions are equal to the dimensions of a regular single or double bed. That is, to place furniture, it is enough to be from 80 to 200 cm in width and from 170 to 220 cm in length.

Installation options:

• Between two opposite walls there are structures designed for narrow spaces. The bed will resemble a mezzanine.
• Placing it in a corner will allow you to attach furniture to two walls and the ceiling. This is the most reliable fastening system that will perfectly complement the interior of a square-shaped room.
• Installation in a niche – perfect solution to save space. The bed can be installed in small hallway or on the spacious balcony. Fastening elements are installed on three walls and the ceiling. Additionally, a canopy is used to separate the sleeping area from the rest of the room.

Many of us are faced with the problem of small apartments and rooms, when we have to save every square centimeter of living space. The ideal solution to this problem could be a bed on the ceiling.

Our instructions, as well as the video presented in this article, tell us about the nuances of its arrangement in the interior.

Ceiling bed - good or bad?

Living in a one-room apartment, the owners have to face the problem of lack of space, because in one room, and not always a large one, it is necessary to organize:

• Sleeping area;
• Area for receiving guests;
• Work area;
• Sometimes there is also a children's corner;
• And even a dining area.

The same problem can arise in a children's room, where the child should have:

• Sleeping area;
• Work corner;
• A place to play or receive friends;
• And sometimes a place for sports.

Since the bed takes up quite a lot of space and is only needed while sleeping, it would be good to remove it during the day, freeing up space. In this case, furniture with a transformation function can be a lifesaver.

But the price is quite high, and not everyone will be happy with it. There is only one way out - do it yourself. But is it worth it?

Advantages and disadvantages

Let's look at the benefits of a bed located under the ceiling:

• Saving room space;
• Interesting room design;
• Location anywhere;
• Variety of designs;
• Ease of creating a private environment;
• For amateurs, this could be a rocking model.

Of course, there are some disadvantages to using such unusual sleeping arrangements that must be taken into account if you want such a bed.

It can be:

• Financial expenses;
• Discomfort from the hanging structure;
• Visual reduction of room space;
• Certain difficulties during installation of the structure.

Advice! If you have not previously encountered the installation of suspended structures, it is better to seek help from specialists.

Types of beds under the ceiling

Suspended or sub-ceiling structures differ in the method of assembly and their location:

Also, beds under the ceiling can be various forms and made from various materials.

Ceiling bed in the interior

Beds under the ceiling, due to their wide variety, are quite easy to match to any style of the room.

Eg:

• IN modern styles interior, for example: hi-tech or techno, structures made of metal, suspended from the ceiling or with a built-in mechanism will look good.
• IN Japanese style or Art Nouveau style, wooden structures are suitable, sometimes in combination with metal elements.
• IN classic styles, of course, are used wooden structures, and depending on the style, they may have carved elements and details. Loft beds are best suited for classics.
• For chaotic styles such as pop art or fusion, colorful designs made from mixed materials and woven parts are suitable. Hanging beds are ideal.
• For youth styles such as loft, modern, eclectic, designs consisting of different materials, it is possible even with elements of brickwork.
• For rustic styles these, of course, are only wooden loft beds, reminiscent of sleeping on an ancient stove.
• For eco and ethnic styles, designs made from natural materials: wood, bamboo, fabric and others.

For each interior style, you can choose a perfectly fitting design from suitable materials.

Structure location

• The bed should be about forty centimeters from the ceiling. It is advisable that you can sit on it, otherwise discomfort will not be avoided.
• The height of the bed relative to the floor can be any, at your discretion. If the bed is low, then the space under it can be used in the form of storage boxes.
• A loft bed is best placed in a corner, between two walls. This way the design will take up less space.
• When using a bed with a lowering mechanism, consider what will be located underneath it and whether it will be in the way.

Important! Most importantly, when choosing hanging structures, you need to make sure whether your walls and ceiling can support such a bed.

We do it ourselves

A loft bed is quite easy to make yourself - provided that you are not afraid of difficulties and love to make things. First, you need to draw up a drawing of the future structure, taking into account its functionality and safety.

The bed can be supported on four posts, or on two posts, and fixed on the other side to the wall surface. You can also place it between two adjacent walls, or attach it to one wall and to the ceiling.

What measurements will be needed based on the size of the mattress:

• Bed frame width;
• Bed body length;
• Bed frame height;
• Distance from the bed frame to the floor;
• Width and length of the mattress.

Tools needed

Let's list the tools that we will need during the work process. If the bed is wooden, this is a regular carpentry kit:

• Pencil;
• Furniture key;
• Square;
• Level;
• Roulette;
• Screwdriver;
• Jigsaw or hacksaw;
• Drill with a set of drills;
• Sandpaper;
• Screwdrivers.
• Cup for applying varnish or stain.

Work process

Let's look at how to make a loft bed step by step:

• Based on our drawing and using a square, we mark and cut the necessary parts.
• Using sandpaper, we process the parts to level the surface.
• Using a drill, we make holes for fastening on all parts of the structure.
• We assemble the supports and backrests, having previously connected them with furniture dowels.
• All angles of the elements that connect the structure must be 90 degrees.
• We attach protective rubber pads to the bottom of our racks.
• We connect both backrests with furniture dowels to the beam for installing other parts of the bed.

• We make a corner beam by connecting two boards with bolts and attaching them to the backs with dowels.
• In the same way we fix the lower beam, which is on the side of the wall.
• For safety, install restraints in the upper area of ​​the bed so that the sleeper will not fall.
• After assembling the main part, make sure that the structure is strong. If necessary, metal angles can be used to strengthen connections.
• We fasten the ladder on the side you choose.
• On the horizontal part of the bed, lay a piece of chipboard or plywood, there will be a mattress on it.
• Treat all wooden parts of the structure with furniture varnish or stain.
• Now you can lay the mattress.

You can use the space under the bed as you like.

Conclusion

We looked at an example of creating an attic bed with your own hands, but you can make other types of beds under the ceiling yourself. Arranging an unusual bed will not only save you financial costs, but will also bring self-satisfaction and pride in your work.

A ceiling-mounted bed can be made from various materials, and for any design there is its own instruction. And create individual design paints, fabrics and decorative elements. So, with the help of your imagination, you can create your own unique design that will surprise your guests and delight your household.

For small apartments It is important to use every meter of space in the room wisely. In such rooms it is very difficult to maintain practicality and functionality without compromising appearance. A good option Saving space would be to make a bed under the ceiling.

Typically, such a bed has one or two berths on top, which can easily sleep both an adult and a child. Below is most often a table, chair, sofa or even shelves for storing things.

Type of loft beds

Beds under the ceiling differ in their functionality and are divided into several types:

• Mini loft bed. This is a multifunctional bed option for children aged 3 years and older. The sleeping place is located at a low height from the floor - about 80 centimeters. There are built-in cabinets and drawers below.
• Bed with storage space. An ordinary loft bed with built-in wardrobes, wardrobes and drawers at the bottom.
• Loft bed with work area. This bed usually combines a place for studying, playing, working and sleeping. A computer and desk can be located below.
• Bunk bed - has 2 sleeping places - upper and lower. In the case of a loft bed, the lower one can be located separately from the main body (sofa, folding chair, bed).
• French bed to the ceiling. This bed is attached to the ceiling. The principle of operation of the mechanism is similar to the operation of an elevator. On one side there is a bed, and on the other there are rails and a counterweight. Very unusual and an option and successful design solution. Lamps can be built into the bottom of the case, and no one will even think that there is a bed hanging above them.

• It is also worth distinguishing between models for children and adults. Typically, adult models consist of a more durable frame and have a discreet design. The children's bed on the contrary has bright colors and a light frame with round corners, protecting against impacts.

Assembling a loft bed with your own hands

The loft bed can have different kinds fastenings For example, traditional 4 supports, or 2 racks - then the opposite corners are attached to the wall. There are also options for mounting between walls in narrow rooms and fastening to the wall and ceiling.

Drawing and dimensions

In our case, the bed size will be as follows:

• Length – 213 cm.
• Width – 153 cm.
• Height – 214 cm.
• The distance from the floor to the bed frame is 167 cm.
• Mattress length – 200 cm.
• Mattress width – 140 cm.

The drawing of our bed looks like this:

Necessary materials

Accessories and fasteners

The list of materials and accessories is compiled approximately, as it may differ in specific cases. It all depends on the availability of goods in the store and your design (see).

Tools used

• Screwdriver
• Wood drill bits of different sizes
• Hacksaw or electric jigsaw
• Square
• Roulette
• Level
• Screwdriver
• Pencil
• Brush and sponge for applying varnish and stain
• Furniture key
• Sandpaper

Making a loft bed with your own hands

So, all the materials and tools are prepared, and we are ready to assemble the loft bed with our own hands.

1. First of all, we mark and cut out the parts according to the drawing. Be sure to use a square when marking.
2. Handle all burrs and sharp corners thoroughly sandpaper. If you bought untreated bars, then you need to go over them with a grinding machine.
3. Now you need to drill holes for fasteners. Do not drill holes for all the parts at once; assemble the bed in stages.
4. We will start with the backrest, which will be connected to the supports. To screw the parts evenly, you first need to put them on furniture dowels. Drill holes for them and connect them as shown in the picture.

Note! Recesses and holes should be drilled not in the center, but slightly from the edge. For example, if you bought a board 20 cm wide, then the center of the hole in the beam will be 10 cm from the edge.

1. Drill all the recesses and holes in these six headboard pieces. Before you drill through hole, make sure that it is really needed in this place.

1. Now you can fasten all the elements into the finished backrest with furniture bolts using a screwdriver and a hexagon.
2. Attach plastic or rubber pads to the bottom of the posts to protect the floor from scratches.

Attention! Be sure to check every corner when assembling, all angles must be strictly 90 degrees.

1. Assemble the second back in the same way as the first.
2. Connect both backrests with a beam using dowels. Screw it in with two bolts, but not all the way so that you can insert other parts.

1. Next, assemble the corner beam. To do this, fasten two boards with bolts. Insert dowels from the end and secure to the backs.

Advice! For horizontal crossbars, instead of bars, you can use birch window sills.

1. In the same way, attach one beam from below, which will be on the side of the wall.
2. Place restraints on top to prevent you from falling while sleeping. On one side, make room for the stairs.

1. When the structure is finally ready, tighten the bolts completely. For reliability, you can strengthen the connections using metal corners.
2. Assemble the ladder and secure it to the body.

1. Complete the base of the bed with strips of plywood on which the mattress will rest. Fasten them to the body, this will give additional rigidity to the structure. You can also attach a sheet of chipboard instead of strips of plywood.
2. Treat the bed with stain and varnish.
3. And finally, the most enjoyable part of the job is laying the mattress.

Advice! For beautiful design ceiling of the bed, you can stretch white fabric over it using hooks. Holes for hooks can be made in the form of metal rivets with a hole.

The modern furniture market offers consumers more and more new solutions for the rational arrangement of small apartments. One of the most interesting design developments is a lift bed - a sleeping place that rises to the ceiling. The most popular products in this segment are BedUp beds developed by French designers and LiftBed models from German manufacturers.

Lift-up bed in the interior: advantages and features

A transforming bed that retracts under the ceiling allows you to implement the most daring solutions of designers and architects. Original furniture for sleep – the ideal solution for small apartments and studio apartments. Raising bed to the ceiling does not load the space, gives the interior lightness and airiness. In the evening and at night, the lift bed serves as a standard sleeping place; during the day, the bed raised to the ceiling frees up the space of the room, allowing you to use the room as a living room, dining room, study or play area for your children. Bottom part the bed can be equipped with built-in lamps, which, when the furniture is raised, will serve as additional or decorative lighting.

Structurally, the bed rising to the ceiling is a platform that moves up and down vertically like an elevator through a special mechanism. When in the lower position, the lift-bed is fixed for reliability using retractable legs.

A bed descending from the ceiling has the following advantages:

• saves room space - for functional organization of space between vertical posts beds can be installed open shelves or lockers. Under the lift-bed you can place a small sofa, an ottoman, coffee table and other low pieces of furniture;
• saves time - the sleeping bed is constantly in a horizontal position, so there is no need to clean and spread the bed linen every day;
• does not require effort to lower and lift;
• brings originality to the design of your home.

Design and types of lifting mechanisms of Lift Beds

Silent and reliable movement of the lift bed ensures lifting mechanism, equipped with a counterweight system. There are several types of mounting the lifting mechanism:

• to Wall;
• to the base of the bed;
• to the ceiling.

In models with a lifting mechanism attached to the wall, the bed is moved along vertical guide posts, inside which a mechanism with counterweights is hidden. The counterweight and the sleeping bed are connected to each other by means of steel cables. For single models, one guide is used, installed in the central part of the headboard; for double models, two guides are used, mounted in the corners.

The advantages of the mechanism include:

• simplicity of design;
• ease of moving the bed;
• reliability.

In ceiling models of the second type, the lifting block is attached to the frame of the sleeping bed, steel ropes are passed through the corners of the bed and fixed to the ceiling.

Beds hidden in the ceiling are designed for a weight load of 800 - 1000 kg.

Mechanism fixed to the ceiling - the beds are attached to the corners steel cables, fabric belts or metal chains, rollers are mounted to the ceiling. Flexible steel connections are thrown over the rollers and brought to the wall along them. The counterweight is located on the same cables.

A bed hidden in the ceiling has the following advantages:

• compact lifting unit;
• the ability to place the bed in any part of the room;
• reliability and simplicity of the lifting system.

Bed lift drive types

Based on the type of drive that powers the lifting mechanism, bed elevators are divided into mechanical and electrical models.

In automated models, the raising and lowering of the bed is carried out by an electric motor. To activate the lifting unit, simply press a button. To prevent spontaneous sleeping, the bed is equipped with special protective systems. Including a mechanism that blocks the movement of the bed when the weight of the empty bed exceeds 9 kilograms. Most electric models have a function remote control and are equipped with a special remote control. In automated models, moving the bed vertically can also be done manually.

The manual lifting mechanism provides reliable operation devices on long years and does not require Maintenance. The operation of the system is ensured by counterweights. Mechanical mechanism is given in the action is light touch of hands, while lowering and raising the bed does not take much time.

Features of Lift Bed beds

The design of the berth does not have a lift-bed characteristic differences from a standard sleep bed and consists of a frame and a base for a mattress. The bed frame can be made from metal elements in combination with MDF or wooden beams.

The furniture market offers several standard sizes of beds that rise to the ceiling, standard sizes frame:

• 120x200 cm;
• 180x200 cm.

The base for the mattress can be:

• solid;
• lamellar;
• mesh.

In which rooms can BedUp beds be installed?

Ceiling beds with lifting mechanisms can be used in the interior small rooms with ceiling heights from 220 to 280 cm.

A bed raised to the ceiling “eats” from 30 to 40 cm of the height of the room.

The lift bed allows you to organize a multifunctional sleeping place even in a room with dimensions of 2x2.5 m.

A bed that rises to the ceiling is a new word in interior design that allows you to solve the problem of shortage in an original way. square meters. The cost of a lift bed cannot be called affordable; the high price is due to the peculiarities of the production technology. The design of the bed with an elevator lifting mechanism to the ceiling includes technical devices, which have special safety requirements, high-quality proven materials are used to make bedding. The financial costs can easily be justified by the benefits of such an acquisition; a bed that drops from the ceiling will certainly become the highlight of any interior!

Photos of lift beds in the interior

If you have any questions or suggestions, you can contact us at e-mail: ls@site
P.S. We do not sell furniture, we only help you get acquainted with what is available and navigate your choice.

The method of installing a bed under the ceiling has been known for a long time and is widely used in transport, in mobile shift camps, and motorhomes. Recently, equipping a sleeping area under the ceiling has become one of the most popular ways to unload the interior small room, make the indoor environment more comfortable and practical.

Bed layout conditions

If we put aside the aesthetic and stylistic aspects of the problem of arranging a hanging bed under the ceiling, then often moving the bed to the ceiling space is the only option possible way solve the problem of overloading a one-room apartment with furniture.

Among specialist designers involved in the development of interiors for small apartments, there is an opinion that a bed or sleeping place under the ceiling looks quite organic if several conditions are met:

• The design of the sleeping place under the ceiling should not block luminous fluxes indoors, shade or cover ceiling lamps and decorative details;
• The color, texture of the material and style of the sleeping bed must match color palette, chosen for finishing the ceiling;
• When securing a bed overhead, you must use a minimum of auxiliary parts and devices. In an ideal layout, the bed under the ceiling should completely hide the fixture and power elements frame

For your information! The fewer supports, beams, pillars, guy wires, and any suspension parts are used, the less the structure of the hanging bed will resemble a makeshift shelter, housing in a change house or an apartment with unfinished repairs.

It is clear that hanging beds under the ceiling in a five-room apartment will look a little strange, well, maybe except for the vintage design, which requires a second tier or a bunk sleeping structure in a children's room.

This arrangement of beds in ordinary interior will indicate the helplessness of the owners in interior planning rather than their skillful management of the living space. Therefore, if you have an idea to build a sleeping place under the ceiling, photo, then you need to be ready to radically change the interior of the room.

Whereas a bed under the ceiling in a one-room apartment looks very rational. Any literate technical solutions, be it a sleeping place under the ceiling or a sofa that folds into a closet, or a TV that pulls out from a niche, only add individual style to the interior. Therefore, you can not be afraid to experiment and try to make a bed under the ceiling with your own hands.

Options for mounting a bed under the ceiling

The practical implementation of the idea of ​​an overhead sleeping place always encounters the main problem of which fastening method to choose for a bed or sofa. In this case, you have to take into account the height of the ceilings and the size of the room.

Sleeping bag fastening schemes

Most often, several basic solutions for fastening a bed box in the ceiling space are used:

As a rule, the use of any of the listed bed mounting schemes under the ceiling requires the presence of capital interior walls or additional steel or wooden beams, laid on the ceiling.

Advice! If the internal partitions in the apartment are built on a frame base and lined with plasterboard, or assembled from gypsum blocks, then it is better to use simplest option in the form of a frame on vertical supports.

Due to the use of racks, the design of such a sleeping bag under the ceiling is not entirely suitable for the design of a one-room apartment. Therefore, this scheme is used only in cases where the size of the bed is relatively small, and it will not be necessary to use massive supports to install the bed.

Designs of sleeping bags on ceiling suspensions

According to reviews from owners, hanging beds from the ceiling, photo, are the safest for everyday use and can be installed in any area of ​​the room.

In addition, the load from the suspension system is evenly distributed across the ceiling and walls of the apartment. At first glance, it’s a trifle, but experts recommend choosing this option, especially if overweight citizens will sleep on a bed suspended from the ceiling.

Sleeping bags can be installed on suspension system from rods, cables or in the form of a welded stationary frame attached to the ceiling beams. If the gross weight of the bed frame, taking into account the mass of people, is estimated at 200 kg, then to reliably hold the structure with a safety margin of 1.5, six M12 anchor bolts or eight M10 fastening points will be required.

If the bed frame is mounted on the ceiling beams, then to securely hold the bed you will need only two I-beams profile height 70 mm, or lay wooden beam, section 70x100 mm.

Note! Hanging beds must be equipped with unsupported ladders similar to a folding stepladder. Any other stair lift, if supported top part guides on the frame of the berth, when a person moves along the steps, it creates a horizontal force on the body of the structure.

As a result, the bed under the ceiling will need to be additionally reinforced with horizontal bracing or hangers made from steel profiles.

Cantilever mounting method on the ceiling

The most rational in terms of strength and easiest to make with your own hands is considered to be a hinged mounting scheme. Most often, a bed frame is installed in the corner area of ​​a one-room apartment.

In this case, two metal profiles are used to hold the frame, most often from a corner or square pipe. The supporting parts are fixed to the wall and reinforced with several, usually 4-5 pieces, legs made of the same material. After installation under the ceiling, the result is a structure resembling right triangle. To avoid deflection of the outermost part of the sleeping bag frame, another, this time a tubular profile is welded into the triangle along the bisector line.

If the bed structure under the ceiling does not exceed the dimensions of 120x200 cm, then it can be hung on a brick or concrete wall. In other cases, before assembling the support triangle, two pieces are sewn onto the wall with dowels. vertical pipes, which bear the main load from the weight of the bed under the ceiling.

The bridge-type ceiling berth looks a little simpler.

Such a bridge for a bed under the ceiling can be assembled with fastening on two metal profiles, hung on opposite walls. Such schemes are traditionally installed on a “blind” wall of a one-story apartment adjacent to a window opening, or directly above front door for studio type premises.

Lift bed storage option for ceiling

This is the most complex scheme for arranging a sleeping bag under the ceiling:

• A system of guide cables and blocks is used to raise and lower the bed frame;
• The dimensions of the berth are limited by the capabilities of the mechanism.

The easiest way to install a lift system is in a residential attic space with a ceiling covered with wooden beams.

Most parts of the lifting cable drum can be installed directly on the ceiling beams. Often, such simplification makes the design cheaper and makes it more reliable, but at the same time, most of the operations of lifting the bed to the ceiling and returning it to its place have to be done manually.

The elevator for a bed in an ordinary one-room apartment is traditionally located behind a false wall. Guides are mounted to the left and right of the body, so the space on the sides and above the lowered sleeping bag should remain free.

The most popular solutions for small apartments

The presence of an elevator mechanism does not mean that a bed that rises to the ceiling should stand alone in a corner, without any furniture or interior details. One of the most good options The layout shown in the photo allows you to use the free space to arrange a soft corner.

After lowering the elevator, the bed body rests on the stand-table and the side supports of the sofa. The sleeping bag is simply stored under the ceiling, and in order to use the bed, you do not need to climb the stairs to the second floor.

The lowering part of the bed frame can be equipped with folding legs and used as a work table.

For big bed, half the width of an apartment room, can be used unusual option layout shown in the photo.

The design of the sleeping bag consists of two guides mounted in the columns of the body and a lifting and turning mechanism. The automatic lifting system allows you to install the bed in three positions:

• In service position, at a height of 40-100 cm above floor level. The mode is used for refueling and cleaning the bed;
• In the condition of being completely laid on the floor. This mode is used for rest and sleep. You can raise the bed to the ceiling, but it will be unsafe to sleep in this state;
• When folded, the structure is fully raised and fixed in the ceiling niche.

The only drawback of this scheme remains the large mass of the bed box; in order to ensure reliable movement, the mechanism is equipped with massive guide beams and powerful electrically driven. All this provision “eats up” the usable space of a one-room apartment.

A design with two lifts built into the bed frame is considered more suitable for the conditions of a one-room apartment.

The raising and lowering of the bed is carried out using two panels of durable synthetic fabric, wound on rolls built into the bed. Only the supporting beams of the suspensions and guide rails are attached to the ceiling to stabilize the movement.

Conclusion

In addition to the bed itself, some interior details are often raised to the ceiling. For example, along with a sleeping place you can lift a folding night table, a wardrobe with accessories and a lot of other things. As a result studio apartment the size of the free space will be no less than a full-fledged studio of 30-35 m2. The only inconvenience of this technology is that it will be very difficult to find lost or forgotten things in the room.