Make a folding serving table. DIY wooden table on wheels

home

Fire safety

Guests came to the house. Having seated them on the sofa, the owners begin to run from the kitchen to the living room, rattling dishes. At this time, visitors are toiling around unattended. The most conscientious try to help by pushing into doorways. Now imagine that you have made a serving table with your own hands. You fill it with various delicacies and solemnly, to the applause of hungry guests, roll it into the room.

It will be impressive and tasteful. Therefore, putting aside our non-urgent matters, we set about making a two-level model with drawers and a partially folding tabletop. The hinged part will increase the lid area from 80 to 100 mm.

Organizational stage of work

We will make the serving table from pine wood panels 18 and 28 mm thick. You will also need 5mm plywood for the bottoms of the drawers. We cut the lumber according to the presented drawing, observing the parameters of the workpieces indicated below.

Serving table detailing

Bottom shelf dimensions 28x459x782 mm.
Stationary table cover – 28x450x800 mm.
The hinged part of the lid is 28x300x450 mm.
Side wall – 18x430x500 mm.
Side wall – 18x450x528 mm.
Rotary stop – 18x120x120 mm.
Side walls drawers– 18x90x393 mm – 4 pcs.
Front and back sides of drawers – 18x90x300 mm – 4 pcs.
Rollers – 18x140x140 mm – 2 pcs.
Racks with a diameter of 20x90 mm – 2 pcs.
Plywood box bottoms 5x280x385 mm – 2 pcs.

Consumables

Guides for drawers, length 400 mm – 4 pcs.
Piano hinge dimensions 32x445 mm.
Furniture roller 65 mm high.
Wooden dowels with a diameter of 6x30 and 6x40 mm.
Round wooden block∅15x160 mm (you can use a rolling pin).
4 mm rail 18x40 mm.
Duralumin tube ∅ 8, length 1770 mm.
Rubber rings (for plastic sewer pipes, ∅ 100 mm) – 2 pcs.
Carpenter's glue.

Tools required for work

Milling machine.
Electric jigsaw.
Meter ruler, compass, pencil.

Detailed instructions for cutting blanks and assembling a serving table

We mark the parts of the table top and bottom shelf on the wood block, having the same rounding radius (about 225 mm). We cut it out using a jigsaw or a router with a compass.
When deciding how to make a serving table according to all the rules, we mill the blanks along the radius in several passes, each time going deeper by about 5 mm. Having cut out both elements, we round their edges with a milling cutter (radius 9.5 mm).
Select according to the template in the countertop round hole for the handle by installing a groove cutter and a copy sleeve on the milling machine.
Take a blank for the side wall. We cut out a rotary stop from it, which will hold the folding element of the lid. For work we use a jigsaw with a fine-toothed file. We cut at high speeds, then the cut will be smooth.
We drill holes for dowels in the ends of the side walls and in the tabletop. To create an ideal pairing, we use markers (for marking mating sockets) and a stencil jig (for precise drilling). Trying to make the serving table beautiful, we carefully sand the parts before assembly. We round the open edges with a cutter with a radius of 6.35 mm.
We connect the tabletop with the lower shelf with the side walls, coating the dowels and the walls of the sockets with glue. First, we fasten the side panel with the cutout to the shelf, then install the second side wall.
Before gluing the table top and side walls on dowels, we insert a rotary stop with a radius of 120 mm into place. We don't use glue here. A washer must be put on the lower dowel with a diameter of 6 mm.
We assemble the drawers on dowels or connect them using the “ dovetail" In the sides of the drawers, we cut out grooves for the bottoms using a milling cutter. Glue them in plywood parts. We attach telescopic guides to the outside of the sidewalls.
We cut out homemade rollers with a diameter of 140 mm. On the end side of the roller we cut out a groove 12 mm wide with a milling cutter. We will install it with glue sealing ring, which will work like a wheel tire. The axles of the wheels are dowels ∅ 15 mm, recessed (also with glue) into the bottom shelf by 40 mm.
TO internal parties We attach guides to the side walls. After this, we drill ∅ 25 mm handle holes in the front panels of the drawers. We put the boxes in place.
To hide the piano hinge for folding the table top, we select 1.5 mm deep folds on the edges of the lid and the folding part.
We are preparing a 4 mm thick template for bending the duralumin tube. We adjust the tube, bent along a radius of 200 mm, to the planned length of the fence.
We put the racks on the duralumin arch. We insert the ends of the tube into 8 mm sockets drilled in the inner side of the table. At the same time, install the racks in the pre-drilled holes.

Serving table – functional and practical solution for the home, which is designed to make your vacation more comfortable. Remember how many times during the evening you have to run to the kitchen for drinks and dishes, although all this can easily fit on such a compact and necessary piece of furniture. How to make a serving table on wheels with your own hands and can an inexperienced person do it?

Design options

The design of the product can be anything and depends solely on your taste and preferences. You can make a simple and unpretentious table, or you can equip it with many shelves and drawers, using it as an additional tabletop. The style is also individual and tailored to suit interior decoration home, it is advisable to use natural eco-friendly materials (MDF, wood) for production. In rooms with modern design metal or glass structures: colored, tinted or transparent.

The most comfortable are tables equipped with wheels, since they are mobile and easy to control. A handle installed on one side will help guide the product, and various hooks, shelves and a cutting board will help make it more functional.

Deciding on a drawing of a serving table

The drawing of the serving table is the first thing you should start with in the process of making it. You can make full use of your imagination, giving the design a fancy shape, any size and color, or take it as a basis ready-made solution from the Internet. The diagram is applied to a sheet of paper indicating all the sizes of the elements, places of their attachment, and finishing materials. In the future, you should strictly adhere to these values and monitor their compliance. So that your work does not take too much effort and time from you, you should not give too much priority complex options, but will stop at a classic 4-wheel table with two tabletops and a handle. The height of 78 cm is sufficient for all occasions, as is the length of 93 cm with a width of 42 cm.

DIY serving table on wheels

When preparatory activities left behind, it's time to stock up on tools and materials. To implement your plan you will need:

board 50 x 100 mm (frame), 25 x 100 mm (table tops), 25 x 50 mm (edging);
paint and brushes;
sandpaper;
tape measure, pencil;
circular saw, screwdriver and drill;
sander and pneumatic hammer;
drills and screws;
protective mask, goggles, gloves.

IMPORTANT. The board must be extremely dry, because otherwise, after some time, cracks and gaps will appear on the surface of the countertops. As a result, the structure will become less durable and attractive.

The manufacturing process consists of the following stages:

The serving table will become an indispensable assistant when relaxing in the company of friends or relatives, watching a movie after a tiring day at work. Carefully and carefully assembled, it will become a decoration of the home, a source of pride for its owner and the general attention of guests.

Every housewife dreams of comfortable mobile furniture that will make staying in the kitchen, living room, and yard comfortable. Therefore, a DIY serving table will be an excellent addition to home environment. This functional item will help solve several problems:

It will temporarily play the role of an additional work surface in the kitchen.
Will serve as a stand for decoration.
Turns into a coffee table in any place convenient for you.
Deliver a change of dishes to the banquet table.
Will help serve guests light drinks, snacks, and treat them to something tasty. After all, no matter how much you load the surface and shelves of the table, when delivering everything on wheels to the right place, you won’t knock over anything or feel heavy.

The main advantages of this type of furniture are functionality, ergonomics, and high mobility.

Serving tables are made from natural wood, MDF, plywood, metal, glass, plastic. You can choose a product model for any interior design. As for making tables with your own hands, mostly wood materials are used, sometimes they are supplemented metal elements.

Usually, mobile tables They are a small two-tier structure, complemented by wheels and a handle. For greater safety and convenience, the shelves of the product are equipped with sides, and are also supplemented with various baskets, stands and special devices for placing bottles. So a small surface can accommodate required amount dishes, glasses, dishes, napkins, etc.

Start making a wooden serving table. Even if your carpentry experience will not be enough to create an elegant carved design, you will still be able to appreciate the benefits and convenience of a simple, concise, neatly made device.

Wooden serving table

This serving table on wheels will come in handy in modern apartment, at the dacha, in the courtyard of the house. Its production will not take much time and will not require any special professional skills. List of materials, drawing and detailed description will make the work easier.

The design of the table traditionally consists of two surfaces. Their area is enough to accommodate breakfast for two people. Rotating roller wheels make it easy to move the structure, and a metal handle installed on one side will help you conveniently control the movement of the table. Bright red color will create good mood and invite you to a meal.

Materials and tools

Make sure to purchase from a specialized store necessary materials:

Board 50x100 mm for creating a frame.
Board 25x100 mm for two tabletops.
Wood slats 25x50 mm – for edging table tops.
4 roller furniture wheels on a metal base.
Massive metal handle.
Screws for fastenings.
Nails.
Putty.
Primer.
Paint (in a can).

The following tools will be useful: a circular saw, an electric drill, a set of drills, a pneumatic hammer, Sander, square, pencil, tape measure. To avoid injury during operation, use special devices: safety glasses, earmuffs, gloves.

Start by cutting out the pieces for the serving table. Use a circular saw.

4 blanks for short tabletop sides, 32 cm long;
4 blanks for long sidewalls of tabletops, 93 cm each;
4 legs 78 cm long;
2 short slats lower table top 32 cm;
18 strips for the surfaces of the upper and lower shelves - 42 cm each;
4 long end strips 93 cm each.

Attention! Before starting assembly, sand the surface of the parts used in the design to remove burrs and roughness. It will be more difficult to complete this work in finished form. Use a sander.

Prepare work surface for assembling the table. It should be smooth. Clean this area of contaminants.

Sequence of process execution

Start by assembling the frames for the serving table shelves. From parts 93 and 32 cm long, assemble 2 identical structures. First prepare the holes for the screws. Widen it at the base so that the screw heads do not protrude above the surface of the part. Apply wood glue to the joints. Tighten the strips with 5 cm screws. Use 2 screws per connection. Part of the glue that protrudes on the surface of the joint must be removed immediately. Adhesive that has soaked into the wood or dried out will not allow for quality painting.
Connect the finished tabletop base frames by installing vertical posts (78 cm each). How to correctly compose the parts is shown in the image below. To attach the legs, with outside drill holes, apply glue, screw in screws.

To ensure strong connections and the parts fit tightly together, fasten them with clamps until the glue dries.

Now you can begin to form the upper and lower tabletops from prepared planks 10 cm wide (18 planks 42 cm long and 2 32 cm long). We lay 10 planks on the top frame. To ensure that the distance between them is the same, you can use a sliver of board as a stencil. Attach the planks to the frame using nails and glue.
We install the boards on the lower base in the same way. First and last (between vertical posts) short strips 32 cm long are laid.
We install (using nails and glue) thin facade end strips, covering the ends of the boards of both tabletops.
Get started finishing works. Use putty to fill uneven areas and screw holes. Leave the table until completely dry.
Sand the table surface to remove any excess putty. Wipe off the dust.
Apply a coat of primer to the wood.
Proceed to dyeing the product red acrylic paint. Apply the substance to a dry surface. To achieve an even and rich color, paint in two or three steps.
When the paint has dried, attach furniture roller wheels to the bottom of the table (using screws and glue). And to the end upper tier- metal handle.

Serving tables are coming back into fashion and are especially relevant before the holidays. Thanks to its compact size and convenient wheels, this table can be at hand anywhere in the house. Need extra space for drinks in your living room when guests arrive? No place to put sauce and chips when you and your family decide to watch a movie on the couch in the evening? Tired of running between the dining room and kitchen, setting the table? It is much easier to arrange glasses, cutlery and snacks on the serving table and calmly bring them to the right place, rather than having an obstacle race for each plate.

Serving table from Cattelan Italia

Most serving tables are very compact in size, so they are suitable even for small apartments. In addition, in conditions of limited living space, it is always better to give preference to mobile and transformable pieces of furniture over stationary ones. For example, it is worth considering that a table on wheels will be more convenient than a regular stationary tea table, because it is much easier to move it to a corner if it is in the way, or transport it to a room that currently does not have enough horizontal planes.

Serving table from Jacues Bar Cart

For small apartments, a folding serving table is perfect, which can literally be hidden in a closet when it is no longer needed.

Folding table from Rexite

For studio apartments or those who like to organize unexpected gatherings on the terrace, a compact folding table may be suitable, which, if necessary, turns into dinette for four people, but when folded it does not take up much space.

Buffet table from Flix - mobile solution

Remember that round models are usually more compact than rectangular ones, West Elm

A serving table can also come in handy in the kitchen, especially if you don’t have enough space in stationary drawers and shelves.

Container table for the kitchen, Miniforms

Of course, an important factor besides the size of the table is its appearance. Among the variety of models, you should focus on the general style of your interior.

Modern, minimalist model with an emphasis on a copper shelf from Miras

Table for fans of classical and baroque style from Modenese Gastone group

Table for outdoors and interiors in country style, Atmosphera

Embodiment Scandinavian style in the interior by Artek

What else should you pay attention to when choosing a serving table? Very often, it is these small objects that become the color or stylistic focal point of the entire interior, attracting the main attention. This is especially convenient for those who want to add some zest to the decor, but are hesitant to buy bright sofa or unusual designer wardrobe. A mobile and small table is just right as an accent for a living room or dining room, and at the same time it will not look intrusive.

The giant wheels of the Chariot brand table are an interior decoration in themselves. You can choose various options colors and finishes

An unusual combination of colors and materials in a model from Douglas & Company

It is worth paying attention to models with additional shelves and compartments in which it will be convenient to place the little things you need at hand.

Swivel shelves and bottle holders in a colorful table from Colé Italian Design Label

When choosing furniture for your home, remember the wide variety available options, and don’t get hung up on the standard set: wardrobe, sofa, table. Even one small design item can significantly change the perception of the interior and become the starting point for creating your unique style.

Recycled aluminum table, Roost for Forma Living

Many people probably know that feeling when you wake up early on a sunny morning and a freshly prepared breakfast is waiting for you in front of your bed. A cup of hot tea will invigorate you and make your morning truly enjoyable. Typically, such breakfasts in bed are served on serving tables. We will devote today's article to an overview of the types of serving tables and how to assemble a serving table on wheels with your own hands. Let us immediately note that in order to complete the project presented below, you do not need to be a carpentry master - any man can easily cope with this.

Serving tables differ from coffee tables primarily because they, as a rule, have wheels that allow you to conveniently move them around the room. Such tables are most often used in restaurants and hotels, when it is necessary to deliver several ordered dishes to the client’s room and to his table. Coping with this task without a serving table is very difficult.

Based on the functions assigned to serving tables on wheels, the design of such tables usually includes two shelves so that not only several dishes can fit on the table, but also drinks, serving sets and more.

Serving table with bottle holder

Today you can find a huge number various designs serving tables, for example, with three shelves, with a bottle holder, folding and many others.

Folding serving table on wheels with three shelves

Of course, a serving table can also come in handy at home, so in this article we suggest you make it yourself at home. We will end up with such a bright, modest table.

The project assumes that the table has only two countertops - usually this is enough to carry breakfast for two. A handle will be attached to one of the sides, by which the table will be transported.

A drawing of a wooden serving table on wheels is shown in the figure below.

Before you start assembling the serving table with your own hands, you need to prepare the following tools:

A circular saw;
Drill and drill set;
Screwdriver and screws;

Pneumatic hammer;
Sander;
Tassels;
Tape measure, pencil;
Safety glasses, respirator, gloves.

To assemble the table, you should also purchase the following materials from a hardware store:

Board 50 mm × 100 mm – for the frame;
Board 25 mm × 100 mm – for countertops;
Rail 25 mm × 50 mm – for edging tabletops;
Dye.

The first stage in making a serving table on wheels with your own hands is assembling the frame. The serving table consists of an upper and lower base, connected to each other by vertical posts.

First, let's prepare the foundations. To do this you need to use circular saw cut 4 pieces 86 cm long and 4 pieces 32 cm long.

Preparing blanks for the table frame

We join the boards according to the diagram shown in the figure below.

Diagram of the upper and lower bases of the table

For fastening we use screws, screw two screws into each joint.

Preparing holes for interlocking workpieces

We fasten the workpieces with screws

Now that the bases of the future countertops are ready, we connect them with vertical posts, as shown in the figure below. The legs, whose height is 78 cm, are attached from the outside of the prepared bases.

Wooden serving table frame diagram

For convenience, while fastening the frame with screws, you can secure it with clamps.

Assembling the table frame

The second step in assembling a serving table with your own hands is preparing the upper and lower tabletops. In total, we will need 20 planks 10 cm wide, 18 of which should be 42 cm long and 2 planks 32 cm long. Thus, it turns out that the bases will be recessed 5 cm relative to the table tops along the long side of the table.

Assembling table tops for a table on wheels

To level the tabletop planks as evenly as possible, using clamps, temporarily secure a board of the same thickness between the table legs.

Aligning tabletop planks

Attach the first 10 pieces to the top base using finishing nails or screws.

Fastening the tabletop with finishing nails

Similarly, we fix 8 pieces in the middle of the second base and fasten two shorter boards on the sides.

Assembling the lower table top

The final step in preparing the countertops is to attach the edging along the long sides of the countertops. The length of the slats should be 93 cm.

Decorative framing of tabletops

We also do fastening with finishing nails.

We fill all the holes and recesses that appeared when assembling the serving table.

The table is now ready for sanding.

After sanding all parts of the table, you can begin painting.

Treating the table with primer

The choice of color for your DIY serving table is yours. According to our project, the table should acquire a rich red color.

Painting the serving table

One of the main functional parts of the table is the wheels. Without it, the table will not become truly serving and will not be as convenient to use. We mount the wheels using screws.

Attaching the wheels to the frame

Today, in specialized stores you can find a huge assortment of different swivel wheels for furniture, differing in design, diameter, material, fastening design, as well as the presence of a brake. For ease of use, it is recommended to choose wheels metal structure with a diameter of at least 80 mm.

So, we got this spectacular wooden serving table, no worse than those sold in stores, and assembling it with your own hands, as you have already seen, was quite simple.

As you have already noticed, our project does not provide for the installation of separate holders for bottles or other additional fasteners. However, this is not difficult to think through and do yourself. Today, in specialized stores you can buy a huge variety of fasteners.

We present to your attention several interesting designs serving tables on wheels.

Round serving table

Serving table with newspaper rack

Transformable serving table on wheels

I always wanted to make or buy a wooden serving table:

Firstly, it is much more stable than plastic ones.

Secondly, wood is much more noble than glass, plastic or other synthetic materials. Plus it's very good here. design solution. On the one hand, the table seems quite narrow, and on the other, quite roomy (after all, it does not provide for gatherings of 20 people).

The only thing I would be very careful about is the paint. It’s one thing for the table to be in the hallway or hallway, and there will be phones, magazines, etc. on top, but it’s completely different if there’s food, groceries, etc. on it. It is important not to allow chemical substances, which are contained in many paints, remained or came into contact with food. This will definitely be wrong.

Dmitry: Good article. Thank you. It’s not clear how much...

Partial or complete copying of materials is permitted only with a direct active link.

On these pages you will learn about my work, products and ideas. I will try to supplement my videos with text and images, as well as those that I missed or cut out from the videos. Sincerely, Shenrok Alexander.

The drawing of the wheel when you click on it is very dark, almost invisible.

This is because it is in vector format, PNG. Save it to your computer and everything will be fine. If it doesn’t work, write me, I’ll post all the drawings separately for download.

I already guessed and downloaded it for myself.

Hello, I repeated your table, twice even. I’ll give one to myself and one to give to my mother. Thanks for the sizes and printouts. The first one was made like yours, in size, and the second one was made to suit you. I shortened it by 15 cm, bent the handle holder upward, and now my wife rolls it without bending over. Special thanks for the wheels, they are beautiful. For myself, I did not mill grooves into them, I left them solid. All the best.

Thank you very much for your feedback. It’s always nice to know that your work was not in vain, but was useful to someone.

Can I have all sizes?

Isn't that all there? Which ones are needed?

Hello, Alexander. If I understand correctly, the thickness of the shield is 18 mm. With a wheel it is more difficult, I print out the diameter and it turns out not 250 but 290, in A4 parameters. I convert from A4 to 20*25 and it turns out to be almost 250. After scanning I get a DSLR when printing 240. Tell me what I’m doing wrong, thanks in advance.

it all depends on what program you are printing through. And secondly, this site distorts the images. Write your email and I will send you the original.

WINDOWS Photo Viewer, This address Email protected from spam bots. You must have JavaScript enabled to view it.

Sent, please check. You definitely can’t print with such a program; it adjusts it to its own standards. I print using Photoshop, it gives 100% original.

Thank you very much Alexander, the same thing happens to a file with a PNG extension, but please tell me what program is best to open a file with a Cdr extension.

This is for coreldians. source, just in case. Now I’ll give you a different format, try it. finish the edges with a compass

Alexander, thank you very much. I installed CorelDRAW, everything went fine and the DSLR. All the best.

Glad it worked out for you.

Alexander, good afternoon!

I would really like to repeat your table. When printing images from a website or from Photoshop, the image sizes are scaled, so you don’t get the correct ones.

Sections