Original homemade products. What kind of homemade items you can make for the household with your own hands?

home

Repair

Everyone is accustomed to treating their home as a fortress, a cozy place where they can escape from the hustle and bustle and worries. It is doubly pleasant when your own home is lived in, everything in it is done according to the owner’s wishes and the necessary things are at hand. It’s nice to return to such a house after a working day or a long vacation; the atmosphere in it is calming and bewitching.

In contact with

You can decorate your own home with your own hands. Homemade products for household – This is not just an interesting idea for an original design, such things are gaining popularity in the world and even the most famous designers are hunting for craftsmen who are capable of producing a real work of art. In addition, such cute organizers really make cleaning easier and help organize materials for hobbies, books, trinkets and jewelry. There are a great many options for DIY home crafts; each author brings something of his own to the project, but in the end the result is always something warm, homely and cozy.

Options for craft organizers for the home

There are several variations various crafts made of metal, clay and plastic, but all of them are aimed at a single goal - to make a person’s life in the house easier and more comfortable. That's why All DIY home crafts can be roughly classified into:

Ultimately you can make a craft just like that without bothering to find her useful application. Ultimately, making useful things for the home with your own hands from wood, metal, plastic, etc. is just a hobby, which, however, can become the main one for a business.

As for where to get materials and tools, fortunately, the modern market infrastructure allows you to find absolutely everything for needlework or carpentry in the nearest store.

Stool-box for tools

Among the homemade crafts that you can do with your own hands, toolbox- this is probably the first thing you should do home handyman. This stool is extremely functional and easy to create, cost Supplies not comparable with the market price good stool, and due to its extremely primitive design, the bench will last for quite a long time. All that is needed to make such a homemade product for your home is:

screws, 20-26 pieces;
sleds, 4 pieces;
block of wood, 17 pieces;
wooden panel, 9 pieces;
screwdriver, hammer, varnish, brush.

For such a homemade product, you should choose a tree that is easy to work with, that is pine or beech. Hard wood species, for example, oak, are extremely undesirable, since it is incredibly difficult to work with at home, not to mention the fact that carrying out complete processing with your own hands is a time-consuming task.

From the bars you need to make four U-shaped blanks, one larger than the other. This is the base of the bench and the steps on the sled. Then you need to strengthen the legs with an additional block. For the step, attach the slide to it on both sides. Make a niche in the form of a small box under the seat of the stool, then screw the side panels. Coat the finished homemade product with varnish.

Cooler bag

This homemade product will be useful on any trip.. Buying it is expensive, since the cost of even the simplest one is higher than the price of consumables. And in order to make a bag yourself, you only need a few simple elements:

roll of insulation;
old bag;
tape and scissors.

It is recommended to choose from insulation options foamed polyethylene, widely applicable for household purposes. 1-2 meters of this material is enough. From the insulation you need to make a cross with a central piece, and then pack it in an old bag. It is better to cut off the “lid” of the homemade product and attach it with tape, fill the side joints with the remains of insulation or foam rubber. You can make such a homemade product yourself in 20 minutes, no more, and in terms of efficiency it is in no way inferior to store-bought counterparts, since insulation is an excellent insulating material.

Cat scratching post house

Wooden claw house- this is the most productive way to keep all other items in the house intact by giving your pet a new toy to tear to pieces. Making it is quite simple, since there are many variations of the project. For the entry level, one house with a cylindrical scratching post is enough. To do this you will need:

wooden panel, 5 pieces;
cylindrical block, 1 piece;
wooden slats, 12 pieces.

The simplest house is with a square roof, but it can be made for a pet or more. complex project- With sloping top or several levels.

Before work wooden elements should be covered with carpet, it is better to do this with self-tapping screws, but making sure that their tips do not peek out and will not damage the pet’s paws. One of the panels will act as a base, the “foundation” of the house is mounted on it - 4 slats, a panel is attached to each of the slats, then another level of slats should be added on top and the structure should be covered with a roof. Installation takes place using corners or self-tapping screws. An entrance should be drilled or cut out in the front panel. Secure the cylinder near the entrance, then wrap the twine around the special glue.

Options useful crafts so many, most of the options are copyrighted and were invented literally out of necessity, that is, to solve a specific problem. In order to come up with something of your own, it is enough to overcome laziness and pay attention to those problems that interfere with living in own home, and then solve them on your own, because it’s very nice.

Crafts made from old objects and things that can be given a second life can make your home much more comfortable. Some DIY homemade products for the household can significantly save the home budget, make work easier, or make the surrounding interior more interesting. And even if difficulties arise in the process, overcoming them will be worth it.

Homemade crafts for the home workshop

In almost any home there is always some set of tools necessary for farming. But sometimes situations arise when working in your own workshop or garage requires some kind of device that cannot be purchased in a store or is very expensive. In this case, you can find a way out by making it yourself.

Forge from a balloon

This device for heating metal will become an indispensable assistant in a home workshop. The forge can be safely used for making original items using artistic forging. These will be truly unique forged items.

For the forge it is best to use empty cylinder gas bottle with a capacity of 25 liters. Its ends are cut off with a grinder, and the door of the forge and its back part will be made from the cut parts. Interior The cylinder is covered with fireproof ceramic wool, which can withstand temperatures of more than 1200 0 C. On top it is coated with fireclay clay (lined), which can withstand temperatures up to 1500 0 C. After lining, fireclay slabs or refractory bricks are laid on the bottom of the hearth.

A hole is drilled at the top and a small squeegee is inserted, allowing the nozzle of a gas-powered burner to be inserted, which can create a temperature in the forge of more than 1000 0 C - quite sufficient to heat the metal to a certain temperature suitable for forging.

Collapsible garage crane

When manufacturing such a lift, the cash costs will be much less than purchasing a factory model. To make it, you will only have to spend money on materials, half of which may be found in the garage.

Materials required to assemble the lift:

Two racks - profile pipe 100x100x2350.
Cross rod - steel pipe arbitrary length with a diameter of 100 mm.
Four supports for the rod - profile pipe 100x100x600.
The base and braces are a corner with 100 mm shelves.
Two metal rollers for the cable.
Four wheels for movement.

For lifting mechanism it is best to use hand winch with a worm gear with a maximum load of up to 500 kg, which is attached to one of the racks of the crane beam.

The design does not take up much space in the workshop, is easy to move on hard surfaces and is quite convenient for removing the engine from the car.

Mobile tool rack

The main highlight of this rack is its small size , but at the same time you can place it on it a large number of tools, and if necessary, quickly move it to any place or neighboring room. It is very convenient to use such a rack in your workshop or when carrying out construction and repair work in large rooms, especially when you need to frequently carry tools.

The rack can be assembled on the basis of a collapsible plastic rack installed on a homemade platform with wheels (trolley). The platform is made exactly to the dimensions of the rack from a metal corner with shelves 45x45 mm or a sheet of plywood with a thickness of at least 10 mm. Furniture metal wheels are used for movement.

Additionally, you can make and attach fasteners to the rack for building levels, extension cords and other tools that can be stored in a hanging position.

To help the hostess

It is not always possible to financially buy, for example, some new furniture in furniture showroom or place an order for its production. But you can always get out of this situation by making the right thing with your own hands, while making it attractive and unique, using available means for this.

Kitchen apron made of corks

The kitchen apron is the surface of the wall located between the countertop and wall cabinets. Usually this part of the wall is lined tiles. But it is possible to use many other materials to cover it, for example, gluing wine corks to the wall.

Such exclusive decor looks pretty great.

Before sticking, each cork is cut lengthwise into two halves with a sharp stationery knife. It is advisable to paint the wall black, which will highlight the seams between the plugs.

Corks are glued to the wall using liquid nails in a checkerboard pattern or with a specific pattern, since it is unlikely that it will be possible to lay them out perfectly evenly, and curved rows will visually look disgusting.

The plugs themselves are not afraid of moisture, but they quickly get dirty and are difficult to wash, so it is best to cover them with a glass screen made of tempered glass. True, you will have to spend a little money on it and order glass from a special workshop, where they will cut it to a given size and make holes for sockets and fasteners.

The glass is fixed to the wall with anchor dowels, which can be purchased at almost any hardware store.

Although the apron, decorated wine corks, may be expensive pleasure, but the result achieved will be worth it.

The surface of the tabletop, as well as the wall, can be decorated with corks and covered with tempered glass.

Hanging folding table

Wall mounted folding table IR allows you to save some space in the apartment. When folded down, it can protrude from the wall at a distance of no more than 10 cm and does not bother anyone at all, but when unfolded it can replace a full-fledged table.

There are many options where you can use a wall-mounted folding table. Here are just a few of the most basic:

Shower for the cottage

There is probably nothing better than cooling off under running water on a hot summer day, especially if it was spent working in the garden. Naturally, only a shower will solve this problem and relieve the fatigue that has accumulated during the day.

You can install a shower yourself without involving outside help; the main thing is to choose a place for it and decide on the type of shower stall.

Among the summer showers, three types of cabins stand out:, which you can freely build on your own:

Installing a simple shower is done as follows:

A shower cabin frame is made, which can be assembled from metal, wooden beams or other available materials.
On the roof assembled frame a metal or plastic water container is installed, which can have a volume from 50 to 200 liters.
Metal container It is advisable to paint it black for better heating of the water. Additionally, several heating electric heating elements can be installed in the container, then you can take a shower even in cloudy weather.

The booth can be sheathed with boards, plywood, slate, or simply covered with tarpaulin or cellophane film with folding curtains.

For construction on your own

The topic of construction or renovation probably worries everyone. And, naturally, everyone who is involved in it wants to finish it quickly with minimal financial costs. Therefore, if you want to save money, you can make some construction materials yourself. For example, these could be wall SIP panels or something like this useful tool, like a vibrating plate, the need for which often arises for many owners of a personal plot.

Homemade SIP panels

To make them, you need to prepare a flat, hard platform. Laying a 10-12 mm thick OSB sheet on it rubber spatula with teeth, apply glue to it.

Then lay sheets of grade 25-30 foam plastic on the glue. After this, an adhesive mass is applied on top of the laid foam plastic, as well as on the bottom OSB board, and a second sheet of OSB is laid on top.

If several stacked slabs are being made at the same time, work should be done quickly until the glue hardens. Typically, no more than 4-5 panels can be prepared in this way at a time.

After preparing the formed slabs, you need to create pressure using a press. Since at home, of course, there is no hydraulic press, it can be replaced with a thick plywood sheet laid on prepared SIP boards over the entire plane and loaded for 2-3 hours, for example, with several bags of cement, sand or other cargo. You can even use a passenger car, driving onto a plywood sheet along a pre-made overpass.

After the glue has completely dried, the homemade panels are ready; they can be placed in a separate stack and you can begin preparing new panels. The manufactured panels should lie unloaded for another day, after which they can be used for their intended purpose.

Making a vibrating plate

To make homemade vibrating plate, you will need to prepare:

An electric motor with an IV-98E eccentric, which is the main part of the vibrating plate.
Steel sheet, at least 8 mm thick, size 450x800 mm. It can be ordered at any metal warehouse.
Two pieces of channel no more than 400 mm long.
inch pipe for the handle and two rubber bushings for its fastening.
The tools you will need are a welding machine, a grinder and a set of wrenches.

WITH narrow sides slabs, stepping back from the edges by 80-100 mm, make an incision with a grinder to a depth of about 5 mm. After this, bend the edges towards the cut at an angle of approximately 25 0 and weld them. The bends are needed so that the vibrating plate does not sink into the material it compacts and moves freely along its surface.

Then, across the slab at a certain distance calculated for mounting the electric motor, two channels are welded with the shelves down. Through pre-drilled holes in the channel, using M10 bolts, an electric vibrator is attached to them.

The handle, made of pipe, is attached to the vibrator through soft rubber bushings, which can be purchased at an auto parts store or hardware store in the hardware department.

Thus, you can make a lot of useful household things with your own hands, spending on it only a fraction of the money that you would have to pay when purchasing finished product. You just need to put in some effort and have certain skills.

A summer cottage is an area where you can give yourself the freedom to conduct numerous experiments and dream to your heart’s content. This manifests itself not only in interior design, but mainly in the design of a garden or vegetable garden. Inquisitive and inventive owners have long been no longer guided by expensive and standard methods for arranging their plots, since there are many alternative solutions in fact for all areas of activity.

There are several varieties vertical beds, which allow you to optimize the use of free space. Non-standard designs are a great opportunity to create interesting design garden, vegetable garden, summer cottage.

This type of beds is in most cases used for growing ornamental plants or herbs.

Materials for production:

Length drainpipes regulated in accordance with the wishes of the owner of the site. However, you should not make bulky beds, as they can complicate movement around the area.

Creating a bed

Stage 1. Create a container. To do this, take a drainpipe, cut it in half lengthwise and put special plugs on both sides.

Stage 2. We take the prepared metal holders and put them on the resulting frames for the beds.

Stage 3. We make holes in the pipe. They are made in those places where metal fasteners will be located.

Stage 4. We pass a cable or strong rope through the holes made.

Stage 5. Fix the cable/rope using fasteners.

Stage 6. Fill the resulting beds with expanded clay and soil.

Stage 7. Plant the plants in the beds.

Stage 8. We hang the pipes to the selected location. Sometimes a special wooden crossbar is installed for this purpose, or rather a structure in the shape of the letter “P”.

Step 9: Alternatively, a special design can be made for the pipes.

Important! A bed made of drainpipes is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four directions by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.

A bed made from a plastic bag is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.

Materials for production:

durable polyethylene film;
sewing machine;
priming;
seedling.

In order for the bed to be strong, it is recommended to pay special attention to the thickness polyethylene film, which is in in this case will act as the “frame” of the structure. The minimum film thickness is 0.2 millimeters.

The process of creating a polyethylene bed

Step 1 . We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the bed being created. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the bed is twenty centimeters.

Step 2. Sew the rectangles together, leaving only the top part bag.

Step 3. We sew a handle to the future bed, the strength of which will allow it to withstand the weight of the bag filled with soil. It should also be taken into account that when watering the weight will increase.

Step 4. Fill the bag with fertilized soil.

Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary in order to plant seedlings in the garden.

Step 6. Plant seedlings.

Step 7. Regularly water the soil and add the necessary fertilizers.

With these simple steps you can get a cheap and useful garden bed.

An integral element of every summer cottage is a compost heap. This is the place where all sorts of biochemical reactions take place to create fertilizers.

To create fertilizers that will satisfy all the requirements placed on them, several key steps should be carefully considered: creating the container and directly correct production the compost itself. Let's talk about each of them in more detail.

Stage 1. Take eight support posts of the same length.

Stage 2. Processing bottom part wooden posts with motor oil or tar.

Stage 3. We dig the posts into the ground so that they are reliable and stable. If compost bin will be located next to the fence, then 4 posts (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.

Stage 4. Between each two adjacent posts we nail the crossbars so that we end up with three independent sections. Be sure to leave gaps that will serve as ventilation holes.

Stage 5. In two sections, we nail the boards horizontally to half the height of the pillars. In these places it is planned to create two small doors.

Stage 6. The remaining section will big door, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.

Stage 7. Install the covers. To do this, you can use one large solid board.

Stage 8. Install the pre-prepared doors.

Stage 9. We provide the doors with handles and latches.

Stage 10. We process the wood using special impregnations.

Stage 11. Paint the box in any color that suits your preferences.

Many gardeners mistakenly believe that any components can be dumped into a compost heap. In reality, to create the right biofertilizer, the “ingredients” must be carefully selected.

Among the mandatory components of a compost heap are the following components:

peat;
ash;
needles;
tree branches;
leaves;
hay or grass;
wood ash;
plant roots;
raw vegetables and fruits, etc.

All elements are randomly mixed in a heap. To speed up chemical reactions It is recommended to cover the pile with a tarpaulin (this is especially true if there is no box).

Trips to the dacha with the family require the presence of entertainment elements on the site that will delight children. The most common way to keep young summer residents occupied is a swing.

Building a swing yourself is not an easy task, but it is quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build comfortable structures with comfortable place for sitting.

Structural components:

two logs;
strong rope.

Indicators:

log diameter – 85 mm;
log length – 700 mm;
distance between ropes – 500 mm.

Making a swing

Stage 1. We stretch the ropes between the logs.

Stage 2. Wrap ropes around each log.

Stage 3. Let the ropes out.

Stage 4. Tighten the ropes to 3 knots.

Stage 5. Attach the swing to the tree.

Important: this swing is designed for only one person.

Garden path from scrap materials

There are several types of garden paths that you can easily make with your own hands.

Step 1. Remove the sidewall from the tire using a knife or saw.

Step 2. Cut the tires.

Step 3. Line the space with corrugated stripes.

Step 4. Paint the path with paint.

Step 5. Sprinkle with stone chips.

This economical option for those who don’t want to rack their brains and waste time on a full-fledged garden path. Tire paths are usually used for vegetable gardens, as they are easily laid in the ground.

Stage 1. Paint the corks in different colors.

Stage 2. Dig a small trench.

Stage 3. We drive in supports to strengthen the future path.

Stage 4. We construct the formwork using boards.

Stage 5. Install spacers along the edges of the trench.

Stage 6. Place crushed stone deep into the trench and compact it thoroughly.

Stage 7. Make a solution from sand, cement, glue and water.

Stage 8. Pour the solution into the trench.

Stage 9. Press in the plugs in random order. Smooth multi-colored stripes look interesting.

These are the simplest and quick ways make a garden path without purchasing expensive materials.

DIY tools

The expression “everything is useful on the farm” turns out to be more relevant when we're talking about about canisters. This plastic container can be used to make a large quantity indispensable tools, which are actively used in the process of dacha work.

To make this tool, we only need a sharp knife and the container itself.

Stage 1. Cut off the bottom of the canister.

Stage 2. Mark a cut line for the scoop on the container so that the handle of the canister is the handle of the future tool.

Stage 3. Cut off excess material.

Due to these simple actions we get an excellent scoop with a comfortable handle.

Materials:

Manufacturing

Step 1. Wash the canister thoroughly so that no odor remains in it.

Stage 2. Cut the canister vertically into two parts.

Stage 3. We make a groove on the board using a woodworking machine.

Stage 4. Apply glue to the plywood and insert it into the bottom of the canister.

Stage 5. Paint the resulting shelf using a spray can.

Of course, this design will not withstand a lot of weight, but it is quite suitable for storing small parts.

Materials:

40 cans;
scissors;
rope;
paper;
marker.

Stage 1. Pierce the top of the canisters with a knife.

Stage 2. Make a stencil from paper.

Stage 3. Apply it to the canister and outline it with a marker.

Stage 4. Cut out large holes using scissors.

Stage 5. We stack the prepared canisters in several rows, tying each row by hooking a rope under the handles of the containers.

Stage 6. We tie all the rows around the perimeter for greater strength.

Stage 7. If you plan to lean the cabinet against the wall, then drill it to the surface.

Stage 8. Place in the bottom row heavy objects- stones or bricks.

The result is a fairly spacious and functional rack that will help get rid of the problem of storing many small parts.

Be resourceful and bold in implementing your ideas. Good luck!

Video – DIY crafts for a summer cottage

Video - We do it ourselves for the dacha

Homemade products for the home are not very popular among city residents.

After all, today the market for all kinds of goods is presented the widest range, among which it is easy to choose something suitable for yourself.

However, in order not to spend extra amounts of money on trifles, as well as to improve your own craftsmanship skills, you can create all these items with your own hands.

Among useful homemade products for home you can find the following:

design elements that will fit into your interior the best way, because you will create them based on your own wishes;
household items you no longer have to buy at the store;
homemade crafts for the home will become decorations for appearance apartments or .

Homemade crafts

DIY crafts can be very different. From beauty to practicality there can be one step in their development, and the proof of this is the interesting shelves made of tin cans from under the coffee. For this craft you will need:

some tin cans(at least 6 pieces);
glue;
a drill or other tool that can be used to make holes in cans.

Let's start creating homemade shelf from making holes. On the back (bottom) of each jar you need to make a hole, which will serve as a fastener to the wall.

However, it is not at all necessary to make a hole in each jar, but if your shelf has big sizes, there must be at least 2 of them.

Instead of glue, you can use a drill and drill a hole in each can, which will be fastened together with nuts and screws, but with glue, of course, it’s easier to work with.

To prevent your homemade project from unexpectedly falling apart while still on the wall, you should use very strong glue, such as the one used in shoe repair. can consist not only of tin cans, but also of glass.

Glass jars can be a useful homemade product for storing small items.

Useful homemade crafts for the home - a house for a cat

If you have a pet in your house, and somewhere in the pantry or on a mountain there is an old monitor collecting dust that has not been working for a long time or will never be used, you can quickly make a cat house out of it.

To do this, simply unscrew the screws of the device, remove the case and separate it from the inside, including the screen. Next, we connect the body parts with the same screws, thoroughly wipe the monitor from dust and begin decorating.

As a decoration for a cat's house you can take regular paint, which covers the entire surface of the house you created. But there is another way: take watercolors and decorate the former monitor with patterns of your choice.

Hanger - homemade do it yourself from buttons

For button hangers we need:

homemade buttons;
spray paint;
Super glue;
hanger.

You can cover the hanger with fabric and sew buttons on the fabric, it also looks quite beautiful.

Thread hangers

This is the hanger itself. You need thick threads with which you will wrap the hanger and get a wonderful homemade product made with your own hands.

To secure the threads, first apply PVA glue to the hanger.

All homemade products for the home are very useful, as they give new life old things and bring beauty and creativity into your home.

Making electronic homemade products with your own hands gained popularity in the last century, when semiconductor devices appeared. With their help, it was quite easy to assemble devices needed for everyday life from old equipment. Today, repair and assembly of equipment for the home or cottage, for a car or garage can also be solved at home.

[Hide]

Homemade devices for home and garden

Electrical homemade products for home and garden that use the power of electricity can be made by every electrician. Most devices are created using factory components and require only school knowledge of electricity.

Electric kebab maker

The electric kebab maker can be either horizontal or vertical. Stores usually sell vertical ones, and they do their job well after some modification.

To create a horizontal kebab maker you will need a heating element and a frame resembling a barbecue. The heating element can be made from a ceramic tube and a nichrome spiral wound around it. The tube is secured through an insulating material in a metal casing. Drawings will be required to assemble the case.

Barbecue grill

An equally interesting idea is a barbecue grill with electrically driven for rotating skewers. By adding an electric motor to a regular grill, you can get an excellent device that will cook barbecue in autonomous mode. To organize the skewer drive, you can use a motor from the wipers, from washing machine or any other 12 Volt. Using a system of pulleys and a belt or gear drive, the rotation of the shaft is transmitted to the skewers, and the meat is slowly turned over the coals.

Homemade WI-FI antenna

Such an antenna will improve the quality of reception and Wi-Fi speed at your home. According to reviews, after connecting it, the signal level rises from 5 to 27 Mbit.

For production you need:

a small metal sieve or colander;
Wi-Fi adapter (USB);
USB cable;
drill;
epoxy resin;
camera tripod;
plastic clamps.

Manufacturing process:

We drill a small hole (14 mm) in the center of the sieve and insert a metal pin into it to secure the adapter.
Insert the connector from the USB cable into the prepared hole and secure it with epoxy resin. The USB connector after gluing must be strictly perpendicular to the plane of the sieve, then the device will work more efficiently.
Then, using two zip ties, “ears” are made through which the cable is attached.
We fix the product on a camera tripod. We drill a hole with a diameter of 12 mm in the antenna and tighten it with a nut.

Necessary materials Insert the pin into drilled hole Glue the USB cable Securing the cable Tripod Installing the antenna using a tripod

Electrical homemade products for the garage

Let's look at several useful DIY projects for the garage.

Homemade chandelier

If you have poor lighting in your garage, then a makeshift chandelier will be very useful. To make a bifurcating chuck, you will need a pair of angular chucks, which are sold at a regular hardware store.

Sequencing:

We remove the wires from the sockets and fasten them with a plastic tie. We get a socket for two lamps. All that remains is to connect them to the electrical network.
To do this we use the base from fluorescent lamp. Carefully break out the lamp, then solder the wires from our design to the contacts of the base.
We insulate them well and attach the base on top of the cartridges.

The use of ordinary light bulbs in this design is undesirable - the sockets may melt from heating.

LED device

Another lighting option could be a homemade LED lighting device.

To make it you will need:

old fluorescent lamp;
LED Strip Light;
connecting wires.

The manufacturing sequence is as follows:

An LED strip is glued to the lamp body in one or several rows.
The connecting wires are connected and brought to the lamp switch.
The assembled device is tested.

Spot welding machine

A necessary device in the garage will be homemade apparatus For spot welding, the basis of which is a transformer from an old microwave oven. Necessary condition— the transformer must be working in order not to rewind all the windings.

The process of assembling the welder is quite simple:

The transformer is dismantled.
Carefully remove the secondary winding.
Two shunts are removed.
A secondary winding of two or three turns is made of thick wire (with a diameter of at least 10 mm).
Electrodes for resistance welding are made from a copper rod with a diameter larger than the wires.

Homemade spot welding tool

Useful DIY items for fishing

Among the homemade products you can find a lot interesting ideas for use in hiking conditions, as well as hunting and fishing.

Electronic alarm

An example would be an electronic signaling device for fishing with a regular fishing rod or other equipment. A simple biting device can be assembled in just half an hour. For it you will need an old beeper keychain and a strip of plastic 1-2 mm thick.

Alarm assembly:

The keychain is attached to the rod.
A strip of plastic is glued to the fishing line and inserted between the contacts of the key fob.

Now when the fish bites, the fish will pull the line, the plastic will fly out, the contacts will close and the key fob will work.

Underwater camera for ice fishing

Using a homemade underwater camera to winter fishing you can see if there is fish under the hole. And this simplifies the fishing process.

To make it you will need:

small camera;
sealed camera box;
small TV;
car battery to power the camera;
extension;
inverter;
lead for cargo;
ultraviolet diodes for illumination during underwater shooting;
superglue, electrical tape, sealant.

Build process:

Two holes are made in the upper part of the box. An extension cable is inserted through one. Through the second is the wire that connects the camera to the TV.
There are several more holes in the box into which light bulbs are inserted for illumination. The wires from the light bulbs are soldered into one circuit (for example, with a parallel arrangement), which is connected to a cable that provides power.
The holes are sealed with glue and tape for a tight seal.
Lead is melted and small elongated bars are poured out of it. They are placed at the bottom of the box.
Set up the camera and connect it to the cable. After which it is carefully placed in the box so that it has a clear forward and horizontal direction and transmits a high-quality image. For stability, the chamber is surrounded by soft material.
A torso (rope, belt) is attached to the box, which will be used to lower the camera to depth. For convenience, you can combine it, the power cable and the communication wire between the video camera and the TV into one core, secured with electrical tape.
Connect the power cable of the video camera to the battery and test the device.

Homemade fish bait

You can make a good bait for fishing yourself. This will be a device assembled based on a simple multivibrator.

You will need:

sound emitter, for example, from a children's toy;
wires;
a small plastic jar, for example, for medicinal tablets;
electronic board;
regulator with plastic rod;
a piece of foam;
batteries;
weights for the float;
volume control.

The bait is assembled as follows:

You need to solder the circuit and check it.
Two wires are soldered to the sound emitter. Then they are carried inside the case and connected to the board.
A regulator with a plastic rod is placed in the lid of the jar.
A dense circle cut out of foam plastic is installed on top of the board, which separates the board from the battery.
Weights are attached to the bottom of the jar so that the container floats on the water like a float.
The regulator sets the frequency and changes the sound.

Bait scheme - 1 Bait scheme - 2

Electronic homemade products for cars

Car enthusiasts create homemade products with their own hands to improve the appearance and ease of use of the car.

Electrical auto tester

A simple homemade electrical probe is perfect for a car. It can show the presence of a voltage of 12 volts in an electrical circuit. It is used to check the serviceability of relays, as well as light bulbs and other equipment. You can make such a device from a syringe and LEDs.

Assembly diagram:

Two LEDs are soldered with opposite terminals (plus one to the minus of the other and vice versa).
A steel probe is connected to one of the solders through a resistance of 300 Ohms. To the other solder there is a contact for batteries.
The design is inserted into the syringe so that the probe comes out of the hole for the needles. Most of the probe is insulated with a PVC pipe.
4 LR44 batteries are inserted into the syringe so that one of the poles is connected to the LED contact.
The other pole of the batteries is connected to a flexible wire with an alligator clip.

The video explains how to make a syringe tester. Filmed by ILYANOV channel.

Light switch

The scheme for smoothly turning off the lights in the car interior is quite simple to make. Such electronics are suitable for any car. A small board consisting of a capacitor and diodes is soldered parallel to the interior lamp terminals. The drop in electricity voltage will occur gradually and create the effect of a gradually fading light.

Car subwoofer

To make a car subwoofer with your own hands, you must first purchase a speaker. You need to start from its dimensions when calculating the size of the case.

The simplest and most suitable form of a subwoofer for the trunk is a truncated pyramid with a slope similar to that of the rear seats.

LED fog lights

You can make LED car fog lights with your own hands.

For creativity you will need:

two ten-watt LEDs;
2 lenses from an old projector;
gaskets from plastic pipes;
LM317T microcircuits;
resistors.

Instructions for assembling the craft:

LEDs are installed on pre-prepared aluminum radiators.
The structure is assembled from headlight housings, lenses from projectors, gaskets and diodes on radiators.
The fog lights are powered through current stabilizers on LM317T microcircuits and resistors.

Car carrying

A very convenient car carrier is made from a computer USB lamp. It is compact and you can connect the device to any place in the car wiring.

Manufacturing scheme:

Remove the contacts from the USB plug.
In the plug body we connect the wires of the lamp and the car alligator clips.
To mount it in the right place (even horizontally), a magnet is placed on the plug.

Sections