How to organize storage of tools in the apartment. DIY garage gadgets: all the most useful things

As soon as the owner of the house decides that it’s time to hang up the flower shelf that his wife has been reminding him so persistently for two months, it turns out that the necessary tools have disappeared somewhere. The situation is familiar, because usually hand tools, all these keys, hammers, screwdrivers, are stored so as not to be seen. We don’t use tools every day, of course, but the storage system needs to be organized correctly so that later we don’t have to look for, for example, a 12 key.

Storage options

Let's immediately decide that we will talk specifically about a workshop, which can be set up in a garage, a separate shed, summer kitchen, on a fairly spacious loggia or balcony. There are usually not many tools in the apartment, and the existing screwdrivers, hammer and pliers can be put in a specially designated box or bag, which can take place on the mezzanine or in the hallway.

If there are noticeably more hand tools, they need their own separate corner, in which you will have to put things in order. The main condition is that the place where the tools are stored must be dry, because metal parts do not like moisture.

There are many benefits to a well-designed storage system. You will always know exactly what is and where it is, you won’t have to look for anything. If the tools are always in their place, you will remember in time that a month ago you gave your neighbor a nail puller that he needed for literally an hour. In addition, properly positioned tools take up less space in the workshop, freeing up space for work.

First of all, you should decide whether you will buy ready-made shelves for tools, a metal mobile cabinet with drawers, or set up a workshop with your own hands from scratch. Let us immediately note that ready-made storage systems for hand tools They don’t always fit 100%; they often have to be remade to suit you.

Let's look at a few ideas for self-organizing the storage of hand tools in the workshop.

1. First of all, you should take care of the little things: nails, screws, bolts, which tend to get lost and scatter throughout the room. For their storage, you can adapt ordinary plastic bottles with the necks cut off, you can immediately see what is where. Small plastic boxes are also suitable, which are best labeled, noting that, for example, there are nails of a certain size here. It is convenient to place such containers for storing small items on a shelf above the desktop so as not to clutter it. And here glass jars Should not be used in a workshop. There are too many heavy ones here metal objects, which can accidentally touch such a fragile container.

2. Magnet. Real craftsmen usually have a large magnet on their work table, to which small metal tools can be successfully attached. Now there are special magnetic surfaces and holders on which you can conveniently and simply store many tools and parts.

3. Plywood panel - the choice of old-school craftsmen. From pieces of bars on such a shield you can create an entire storage system that will not take up much space and will allow you to place almost all hand tools. The costs for such storage areas are minimal, and everything will be done according to the needs of the master.

4. You can also buy a ready-made metal sheet with holes for tool holders. However, you can do this yourself. On ordinary nails or self-tapping screws, saws, keys, and other tools with special holes in the handles are hung in the required order.

5. It is convenient to allocate separate storage for screwdrivers, for example, a regular school stand for pencils and pens.

6. Plastic boxes with compartments, which in the kitchen are usually used for forks and spoons, can also be adapted for small hand tools.

7. If you don’t really want to build panels and make shelves, you can move an old sideboard or buffet to the garage workshop. It has a lot of shelves and drawers where many tools can fit. The main thing is to lay everything out yourself so that you know exactly where it is stored. garden tools, and where - carpentry.

8. For drills and bits of a certain size, it is better to buy a ready-made cradle - an insert with tools. Or drill holes in a wooden beam where the drills will fit. And sign - 3, 4.5, 9 and so on, so you know right away right size cutting tool.

9. When arranging storage areas in the workshop, you should take care of safety, especially if small children can get into the room. Piercing and cutting tools in this case, it is better to hang it higher on the wall, and securely close chemical liquids in a cabinet with lockable doors.

10. A free-standing rack with holders for long handles of shovels and hoes is perfect for garden hand tools. Of course, you can just lean them against the wall, but remember the proverb about the same rake?

Let us state that organizing a workshop is not that difficult; there are plenty of simple ideas. Just prepare yourself for the fact that one time you will have to tinker in the garage a little longer and make an effort, but then there will always be strict order in your workshop and there will definitely be no problems with finding a “cross” screwdriver.

Almost all men living in own apartment, and even more so in a private house, they dream of creating at least a small workshop with a set of necessary tools. But quite often, due to inexperience, beginners simply do not know where to start. Therefore, the question arises - what tools are desirable to have on hand in the first place. And secondly, how to organize a workshop with maximum ergonomics, conveniently placing everything you need in it.

Let's try to provide all possible assistance. Today's topic: home workshop - optimization of space and convenient storage of tools. Some recommendations will be given and shown successful examples. Well, you’ll have to figure it out and “adjust” it to the existing conditions yourself.

Tools needed for home

Even if the owner of the house is not a big fan of working in the workshop, you still cannot do without a certain set of tools on the farm. Therefore, in order to always have everything you need at hand, you should make a list and start purchasing tools. Sooner or later they will definitely come in handy both in an apartment and in a private house. It is clear that only people with a fairly high income can afford to buy the entire set at once. Usually the “arsenal” is formed over several years, and you can start with the simplest things.

By the way, even if a woman begins independent life, there should also be at least some tools in the apartment. But the list of “female recruitment” is much more modest.

In construction stores you can find ready-made universal tool kits. Perhaps they are suitable for those who use them only in extreme cases. In addition, often the instruments they contain are not of high quality. And most often home set and consumable parts for it are acquired gradually.

So, in order not to run around the neighbors in search of what they need, each owner should have the following tools:

This table presents only the basic tools that should be present in the “arsenal” of any homeowner. Of course, everyone decides for themselves which ones to include in their home tool kit, and which ones can wait a while.

If the master’s hobby is electronics, jewelry, wood carving, making metal or wooden equipment for summer cottage or other areas, you will need special tools designed for a specific type of work. But such craftsmen don’t need any special advice. They themselves can give their recommendations to anyone.

Organizing a workshop and storage areas for home tools

In a private house, usually even during its construction, the owner allocates a place for a workshop in advance. Or he organizes it in an outbuilding or garage. It is more difficult to allocate personal space in an apartment. But if it has a spacious storage room, balcony or loggia, then those who like to make things will immediately “occupy” this territory.

Some craftsmen limit themselves to a reliable table and purchased plastic organizing containers for storing tools. Others, showing ingenuity, come up with various cabinets, shelves or stands. They take up minimal space and do not clutter up even small rooms.

Setting up a workshop on the balcony

If the workshop is set up on small balcony or loggia, and it is planned to be used year-round, then a number of measures must be taken. First of all, to create a comfortable environment in a room during the cold season, it must be insulated.

Insulating the balcony significantly expands the functionality of this room!

Cold balconies or loggias are not used in winter, and are often gradually turned into storage unnecessary trash. Why not turn it into an all-season space?

– read in a special publication on our portal.

The second task, without which the workshop will be incomplete, is supplying electricity to the room and installing lighting fixtures. When the room is completely ready, you can move on to planning your workspace. The plan, of course, will depend on the configuration of the balcony. As a rule, this is completely small area

, often having a width of only 1200 mm. However, even within such limits, the craftsmen manage to arrange everything necessary for comfortable work.

The main thing in the workshop is a reliable and durable workbench. It is equipped with a thick tabletop that can support the weight of tools. Loads when applying forces during work must also be taken into account. The table must be well lit, so when laying the wiring, this must be taken into account.

Prices for tool boxes Plastic Cenntre

Tool box Plastic center Blocker

The main tool that is used most often is installed on the table. If it is large enough, then it should be placed so that there is room for other work.

An excellent option that will help save space and allow you to keep all your tools in order is a transforming cabinet. Such a cabinet involves the use of not only its main space, but also doors. Horizontal jumpers are fixed to the sashes, which are not only stiffening ribs, but also functional shelves.

The set with the cabinet also includes a work table, which is mandatory for the workshop. In the example shown above, it has a foldable design. However, the tabletop and its support must be reliable.

The cabinet opens and the table unfolds only when any work is planned to be done. The rest of the time it is compactly located near the wall.

The design of the cabinet is simple. It is assembled from timber and plywood of different thicknesses. Therefore, it is quite possible to make it yourself to the specific dimensions of the available space. If this is not possible, then the cabinet can be ordered from an experienced carpenter, providing dimensions taken from the site of its intended installation.

Don't forget about the space created under the table. There can be quite a lot of space for arranging closed and open shelves. To keep neat appearance workshop, on the shelves under the table you can install the above-mentioned plastic containers with tools.

Another option for expanding your workspace. We are talking about installing mobile cabinets and racks with tools under the table. Naturally, such pieces of furniture will have to be adjusted in terms of parameters to the height and width of the table. An extended cabinet immediately increases the area of ​​the workbench, since its surface can also be used for work.

If the space on the balcony is completely limited, or there is none at all, then a wall cabinet is suitable, which can be placed even in the hallway. The photo shows two cabinet options. One of them has a door made of solid plywood, and the second one has a door made of perforated plywood. Thanks to the holes in the door leaf, you can attach some tools to it using hooks. However, this model can hardly be hung in the hallway. A solid door will completely hide the contents of the cabinet, and its surface can be disguised, for example, with a mirror. Notice the many drawers in the closet. Perfect place for storing various sorted “trifles” and fasteners.

Setting up a workshop in the garage

Another place where a workshop is most often organized is a garage. This is understandable, since the machine requires periodic maintenance, and a large number of the instrument is placed here. Therefore, it is easier to combine everything you need in one room.

If the garage is wide and long, then shelving can be placed along the far and side walls. This layout results in a spacious work surface and a large space underneath. Everything you need can easily fit here.

In order to safe operation both the workshop and the garage itself, it is recommended to make floor racks, as well as hanging stands from non-flammable material. If for production wall shelves If wood is selected, it must be treated with a fire-retardant impregnation.

If the garage is not wide enough, there is still enough space along the back wall to organize a workshop with a work desk and numerous cabinets. The only thing that needs to be considered for any garage workshop is the intensity of lighting. Such a building, as a rule, lacks windows that let in natural light. And we have to compensate for this with electric ones.

If there is no desire or opportunity to stretch tool racks over the entire length of the garage, you can use the idea of ​​a retractable shelving design. Moreover, if you correctly place the retractable panels, then in combination with them it is quite possible to organize and work surface. When the panels are moved to one side, a fairly spacious and reliable table top is revealed, allowing the necessary work to be done.

To create such a structure, you will need panels, for example, from MDF. You can perform perforation - this will significantly reduce the weight of the panels, and the holes will be useful for fixing tools. Small wheels are attached to the top and bottom sides. In addition, guides will be needed to ensure free and smooth movement of the panels. They are fixed on the desktop and on the ceiling. Or on the shelf provided above the workbench, which will also not become superfluous.

If the garage is not only narrow, but also short, and it is necessary to organize a workshop in it, then suitable option folding table. When not needed, the tabletop of such a workbench slides down along the wall. Well, you can place a stand above the table or hanging shelves with the tool. The garage space will be significantly saved, and the countertop will not interfere with placing the car in the garage or performing certain maintenance work on the car.

The option of placing tools on stands mounted above the desktop is convenient because everything you need will always be in sight. Thanks to this arrangement, you won’t have to look for the necessary consumables or, for example, wrench or a screwdriver required size. The stands have boxes with cells for bolts, screws, nuts and other small elements. Moreover, for convenience, the boxes are located at a slight angle - their contents are immediately visible.

The upper shelves, which have greater depth, can be used for storage electric tool, and for various compositions also necessary to perform certain types of work.

This arrangement working area can be organized both in the garage workshop and on the balcony.

The option of a compact but spacious cabinet is ideal for small room garage. And that's all necessary tools And Consumables distributed very ergonomically. Top part cabinet is reserved for storing tools that have the average size. Its lower part is a kind of chest of drawers with numerous narrow drawers. Thanks to the correctly selected height of the drawers, order will always reign in their cells, since each item stored in them has its own place. When drawing up a design for such a cabinet, you must immediately plan in which drawer what will be stored. Depending on this, choose the height of the sections. Well, even a novice home carpenter can make such a cabinet.

The mobile version of cabinets or carts for tools solves many problems. This allows them to be used in different places garage, as well as in the yard area. Such convenient devices do not take up a large area, and thanks to fairly large wheels and specially designed handles, they are easy to transport. At the same time, they contain many of the necessary heavy tools.

The mobile cart can be purchased ready-made, as they are presented in a fairly wide range. But it won't be cheap. Therefore, it is best to draw up a drawing and make it yourself from timber and plywood. And powerful wheels are easy to find in the store furniture fittings.

Useful little things when setting up a workshop

This section presents some ideas from readers that will contribute to the optimal organization of the workplace. Many of them will have virtually no impact on the family budget.

A great way to save space and always have consumables in sight is to keep them in clear plastic containers shaped like jars. You can buy them ready-made or use containers left over from various products to make them. Some workshop owners use instead plastic containers glass jars, but they have to be handled extremely carefully. The principle of their fastening is as simple as possible - the covers are screwed from the inside with self-tapping screws to the bottom surface of the shelves or wall cabinets. And it turns out that these surfaces also become functional.

Another approach can be taken. Side part plastic cans cut in half to the neck, which should remain intact. In this case, the covers are screwed not to the bottom, but to the side surface wall cabinet, which is also rarely used for storing tools. You get open containers-bowls for all sorts of small things. An example is shown above.

If you don’t have any plastic cans on hand, and glass ones don’t inspire confidence, then you can use drinking water bottles, which are definitely found in every home. A hole is cut out in their upper part, convenient for removing the parts stored in them. Rings are screwed into the caps - for the convenience of hanging bottles on hooks or even on hammered nails.

There is usually no shortage of cans in the garage, and they can be plastic or metal. Any of them, unnecessary or unsuitable for direct use, can be put to good use. And evidence of this is the large number of ideas for using them. For example, if a good-quality steel or aluminum canister has been damaged and it is no longer possible to store liquid compounds in it, you should not rush to throw it away. This container will make a reliable and convenient container for storing and carrying tools. To make it, just carefully cut out the side of the canister. Then, secure the edges of the cut with a rubber sealing pad, secure the hinges and lock. And the internal space is divided into cells using plywood partitions and shelves. Such a container can be used to store some tools in the garage, in the trunk of a car, or on the balcony.

Depending on shape and size plastic canisters, from them you can assemble drawers for a cabinet, rack or cabinet. The main thing is that you don’t have to spend a lot on plywood and boards. And there is no fuss with assembling numerous boxes.

It is enough to cut out one of the sides of the canister, leaving the handle and lid intact - and the container is ready. Depending on the size of the parts you plan to store in this box, the size of the canister is also selected.

Many owners of home workshops have appreciated the convenience of magnetic strips on which bits for screwdrivers, drills, screwdrivers, scissors and other similar tools are stored. The ease of use lies in the fact that you don’t have to search for, take out, and then put back the tools. They can be easily removed and then reattached to the magnetic strip without much distraction from the work in progress.

Prices for FIT tool boxes

Toolbox FIT

If you have magnets (and you can find them if you want), then making such an improvement to your workplace is a piece of cake. You can look for ready-made magnetic shelves in furniture fittings or kitchen utensils stores.

But such a device for storing pliers, screwdrivers, scissors and other tools can be made by any owner who is starting to organize a workshop. To do this you will need segments of ordinary polypropylene pipes diameter from 20 to 32 mm. The cost of such pipes is low, and in addition, they can remain after repairs. The pipe is marked and cut into equal sections with a 45 degree bevel to one side. Then the location of the holders is also marked on the wall or board. After this, the prepared sections are fixed according to the markings using self-tapping screws through the protruding beveled edge. Instead of pipes, sections of durable reinforced hose can also be used. Fast, cheap, neat.

* * * * * * *

There are plenty of other ideas for arranging a workshop and placing tools in it. If you want to introduce innovations to your existing place of work, or finally start organizing it, then you can use the examples presented above. The process can also be approached creatively and used to create convenient devices items that have been lying idle for a long time. After all, in every garage or shed you will probably find something that is a pity to throw away, but there is no way to find a use for it. We will be glad if you share your improvement proposals on the pages of our portal.

In conclusion, there is a video in which the master shares his experience of creating a convenient tool storage system in the workshop.

Video: An example of a self-made system for ergonomic tool storage in a workshop.

For a man, a garage is a second home where he spends most of his free time. In order not to get lost in the amount of equipment stored in the garage, let’s put everything in its place. Let's look at the issues of zoning and landscaping space, learn how to make your own racks, workbenches and practical holders for large and small things.

Zoning the premises - dividing the garage into functional areas

Whether you're starting a project from scratch or thinking about remodeling your garage, good option for construction - two-tier zoning of space. There will be a workshop on the top floor, and a basement and pit on the bottom. Let's look at an approximate plan for the location of zones in the upper part of the garage, taking into account the convenience and specifics of the room.

Zone No. 1 is transitional. Set up a place for items that you will need when leaving the room: racks for outerwear and shoes, a shelf for keys, mobile phone, bags. The transition area should be close to the door and not cluttered with work area, shelving or other items.

Zone No. 2 – for household items. This space can be organized for storing items that you need in Everyday life. If you have pets, design a small rack for food and canned goods. for newspapers, coffee machines, electric kettles and microwaves. The area can also be used for storing things in bulk that do not fit in the cellar.

Zone No. 3 – shelving. There may be several areas for installation of high shelving, depending on the area of ​​the workshop. We store them in garden tools, spare parts, equipment for work.

Zone No. 4 is auxiliary. This is where we store large items and things that you rarely use. For example, recreational equipment, holiday decor. If desired, the corner can also be equipped with a rack for storing a set of summer and winter tires.

Zone No. 5 – sports corner. Set aside space for bicycles, rollerblades, scooters, and make a net for balls. Provide hooks, holders and nets for them so that nothing rolls down and stays firmly in place.

Zone No. 6 – working space. Equip this area with maximum comfort. Provide universal workbench for gardening, woodworking and auto repair, convenient sliding wardrobes, shelves for storing small items. And don't forget about lighting. A window will be a big plus; if it is missing, use artificial lighting by connecting several 60 and 80 W lighting lamps.

Inspection pit and basement - we arrange it comfortably

Car repairs can be carried out without an inspection hole. However, an experienced car enthusiast knows that in this case it is more difficult to get to the underbody parts of the car. The back and neck get tired quickly, you have to constantly take an uncomfortable position, search the right tool also becomes difficult. An inspection pit with a basement helps the master get rid of all these problems. The first thing you need to start with is adjusting the pit to the height of the master. You should not touch the ceiling with your head and reach the parts of the lower part of the car. Add 10 cm to your height, the final number will be the comfortable depth of the inspection hole. We select the length and width of the opening according to the dimensions of your car, based on generally accepted standards. We strengthen the side parts of the recess with metal corners and cover them with boards. This finishing will extend the life of the walls and ceilings.

Don't forget about the lamps and storage niches in the side parts of the pit, in which you can put the necessary tools and parts for car repairs. For ease of descent, provide a ladder or steps and a ceiling that can be used to cover the pit after completion of the work. Make it out regular boards or automate using a lifting mechanism. This way you won’t drop your tools into the hole and will protect yourself from accidentally sliding down.

An additional advantage of arranging a viewing hole is. You can store canned food and vegetables in it for the winter. When building a cellar, do not forget about ventilation and a light at the entrance.

When building a pit from scratch, consider important point- level groundwater. It should be below the floor of the pit and cellar. To build walls use durable materials(foam blocks, M400 concrete).

Basics of installation and design of rack structures

Before placing it, decide on its dimensions. Its dimensions should not interfere with work, clutter up the garage space or interfere with the car’s turn. The best option– installation of a rack against the wall. The height of the rack depends on the size and number of things. The lower shelves are reserved for storing large items (jacks, fuel cans, welding machine). We also place the tires below or provide them with a separate shelf higher. To prevent the rack from bending from the weight, we pay special attention to the lower part of the structure. We make it from a thick board or sheet of metal. The depth, width and space between the shelves of the rack are selected individually. Considering the average sizes of equipment and parts, the dimensions vary from 0.5 to 1 m.

To strengthen the structure on the sides we use vertical and transverse metal corners. After welding the corners, we assemble the frame according to the project, clean and prime the beams. If the frame is made of metal, we coat it with an anti-corrosion compound. After assembly supporting parts For the rack, we cut boards of suitable length. We also treat them with impregnation and open them with enamel. We fasten the boards with screws, making sure that the shelves fit tightly to the frame. To attach the rack to the wall we use large anchor bolts. To make it more convenient for you to sort your tools, we bolt a container to the side of the rack, where we put screwdrivers, car testers and other small items for work.

Workbench – preparation of the master’s workplace

One of the main elements of arranging a garage is a workbench. This is a master’s workplace that receives special attention. Before designing, we calculate the free space and outline the project according to it. We weld the workbench frame from profile pipes and metal corners. The average height of a workbench is 0.9–1 m. This parameter depends on the height of the master and his preference to work sitting or standing. After assembling the frame, we coat it with an anti-corrosion primer. We lay the base of the tabletop from a thick board 7.5 cm thick. If there are no boards, we fasten 7 sheets together thin plywood, seating them on PVA construction glue. After fastening the sheets, we place them under a press so that they are finally fastened together. We cover the base of the tabletop with a metal sheet 5–6 mm thick and coat it with an anti-corrosion primer.

We cut off the excess parts of the sheet with a grinder or a metal file and finally attach it with screws, drilling holes for fastenings in wooden base countertops. This surface is suitable for both carpentry and plumbing work. If desired, we equip the workbench with retractable or sliding cabinets with shelves. We hang a perforated screen on the wall above the workbench. Here you can hang the tools that you most often use in your work, providing them with shelves, hooks, and also homemade designs for nuts, bolts, self-tapping screws.

A simple version of a floor tire rack

It's hard to imagine a garage without a set of replacement tires. Most often they are stored in bulk. To solve this problem, consider a simple shelving unit that doesn't require any special carpentry skills. If you have free space in the garage, this option is suitable for you. floor stand. As an example, consider a two-tier rack that holds two sets of tires with a tread width of 265 mm. Floor shelving dimensions:

• width – 1.1 m;
• depth – 0.5 m;
• total height – 1.83 m.
• the distance between the shelves is 0.7 m.

If you store truck tires in the garage, you need to recalculate the dimensions. When choosing the width of the lumber, keep in mind that it can withstand a load of approximately 180-220 kg, depending on the weight of your tires. We recommend taking wooden beams with a section of 1.5 x 3.5 inches. To assemble the front part of the rack, we saw off two beams 183 cm long. These will be the side parts of the frame. We saw out 3 front partitions 1.1 m long. To connect the front to the back, we sawed off 6 strips of 0.5 m each.

Floor tire rack

We connect the side supports at the upper base with a longitudinal partition. Moving down in increments of 0.7 m, we attach two more longitudinal partitions to the supports. After this, we drill holes for 6 short strips and fasten them to self-tapping screws on the sides opposite the longitudinal partitions. The front frame is completely ready.

Similarly, we assemble the rear part of the rack and fasten it to the front frame. For reliability, we tighten the structure with straps on the sides. The shelf is ready, load it with tires. In order for the stand to serve for a long time, we cover it with wood impregnation, paint it and varnish it.

Hanging shelf for cordless power tools

Practical and nice option for storing cordless tools – hanging shelf with holders. At the bottom of the shelf there will be a drill and a screwdriver of different power, and on the top of the structure there will be charging devices batteries. There is no need to store power tools in a case, everything is at hand. The shelf saves space and hangs on the wall. To assemble it, we prepare a board with a wall thickness of 2 cm. We measure the dimensions of power tools to select optimal size slots. We cut out short strips for attaching tools. For example, to hang 5 power tools you will need 4 strips 2 cm thick. This gap will allow you to hook a drill, screwdriver, securely fixing them in the support. We make the vertical strips higher and fasten them together with self-tapping screws.

The working height of the side parts of the structure is 23 cm. The part protruding beyond the upper edge of the shelf plays a decorative role and serves as a limiter for chargers and tools. We calculate it individually, based on the height of the equipment. We saw off two shelves, connect them with T-shaped stands for power tools and sidewalls, not forgetting to first attach them to internal parts square planks size 2x2 cm. We attach the top shelf in increments of 11 cm from the bottom shelf. The structure is ready. All that remains is to coat the shelf with wood primer, paint and varnish if desired. We hang the mini-rack on the wall and fill it with tools. Order has been restored here.

Simple designs for cutters, keys, files and fasteners

So that the workshop in the garage looks neat and the master can find the tools and fasteners he needs at any time, we will design several simple and convenient suspended structures. We prepare thick polystyrene foam and attach it to the wall on a 3 cm thick plywood backing. We fasten both parts together using liquid nails or assembly adhesive PL 500. We wait several hours until the structure sets firmly. Thanks to the porous structure of the foam, sharp and rotating objects easily enter and are firmly fixed in the material. We insert bits, drills, cutters, crowns, keys, screwdrivers, awls, hubs, files into the foam. Ideal place for the location of the foam panel there will be a wall above the workbench. If there is no perforated screen hanging above it, this is a good option to diversify the interior and concentrate cutting tools in one place.

Make a small stand near the wall next to the electric saws to store grinding wheels and cutting discs. Take regular disposable or old plastic plates and cut them lengthwise into two equal parts. You will get semicircular pockets. We seal the cut edge with tape, hiding and decorating the sharp corners. We repaint the stands with a spray can in the desired color and fasten them to the wall with bolts in three places, below and on the sides. The storage pockets are ready; we insert grinding wheels and saw blades into them.

To prevent containers with nuts, bolts and screws from cluttering up your work space, use the idea for creating hanging structures. For the first option, prepare plastic jars. Remove the cover and attach it to wooden shelf on self-tapping screws. Fill the jars with fasteners and other small items for work, screw tightly to the lid attached to the shelf. The number of designs depends on your needs. Hanging storage jars can fill the entire lower part of the shelf. This design saves usable space and is very practical.

We make another original mini-rack for storing small items in the garage from food containers with a magnet. Using super glue, attach a round washer-shaped magnet to the bottom of the container. We attach a wooden strip with magnetic strips to the perforated screen. Inside the containers we store screws, nuts, bolts, self-tapping screws and other small items that are lying around in the workbench drawer. We hang the boxes from a magnet.

Practical storage systems for the garage or workshop.
For many people, the garage is not only a place to store a car, but also a real automotive, metalworking and carpentry workshop. Therefore, it is important that everything is always at hand and in the right place. But sometimes it’s so difficult to understand the variety of screwdrivers, pliers, scissors, drills and other utensils that are stored in “men’s Eden.” This review contains simple yet effective ideas that will help you create almost ideal storage systems in your garage.

1. Magnetic tape

Magnetic tape for storing small items metal parts.

Magnetic tape pasted on the wall in the garage can be used to drill storage, scissors, bolts, nuts and other small metal parts. This magnetic holder is very convenient to use and will help prevent the loss of small but important spare parts.

2. Plastic containers

Rack made of plastic containers.

From large plastic containers and pieces of wood, you can build a large rack for storing tools, wires, spare parts and any other things. Organizing such a rack will allow you to restore order and significantly save space in your workshop or garage.

3. Rails

Rails for garbage bags and paper towels.

On one of the free walls of the garage you can place several small roof rails, on which you can conveniently place rolls of garbage bags, paper towels, sandpaper, tape, skeins of rope and much more.

4. Furniture brackets

Brackets for storing furniture.

Many summer residents use the garage to store folding outdoor furniture. So that it does not stand in the corners and does not take up much space, make a vertical rack for it with wooden or metal brackets and screw it to one of the free walls.

5. Jars

Storage of nails, bolts, screws and other small items.

Bolts, nuts, nails, self-tapping screws, screws and other small things do not take up much space, but storing them mixed is extremely inconvenient. Jars with lids screwed to the bottom of a wall cabinet or under the desktop will help you put these things in order.

6. Ceiling grille

Grid for storing pipes and baseboards.

A plastic grid screwed into the corner of the garage under the ceiling is ideal for storing leftover water pipes, baseboards, profiles and other long items. Such a storage system will help significantly save space in the garage and prevent possible breakdowns of fragile building materials.

7. Organizer for screwdrivers

Wooden organizer for screwdrivers.

A small practical organizer for screwdrivers that any man can make by simply drilling the required number of small holes in a block of wood. This product can be hung on one of the walls of the garage or workshop to store all the screwdrivers in one place.

8. Vertical storage systems

Vertical panels for storing things.

Some perforated panels made of metal or plywood under a table or in a cabinet will provide an ergonomic and convenient place for vertical storage of small hand tools.

9. Plastic pipes

Storage systems made of PVC pipes.

Leftover PVC pipes of different diameters can be used to create the most different systems storage For example, pieces of wide pipe screwed to the bottom of the cabinet are suitable for storing a screwdriver, drill and other tools of this type. From pieces of medium-diameter PVC pipes you can make cells for storing various sprays, polyurethane foam, tubes of paint and other containers.

10. Tassels

Hanging storage for brushes.

It is very convenient to store paint brushes and spatulas suspended on a thin wire or on a thin steel rod.

11. Rack for garden tools

Wooden rack for garden tools.

To prevent garden tools from taking up a good third of the garage space, store them on a special rack screwed to one of the walls. You can make such a rack with your own hands from blocks of wood, wooden pallet or pieces of plastic pipes.

12. Multifunctional rack

Pallet rack with shelves.

Wooden pallet complemented by shelves made of pieces wooden slats, will become a functional component of the garage and will help to place a huge amount of hand tools and small ones in one place.

13. Rod holder

Fishing rod storage.

A simple wire lattice can be used to create a convenient fishing rod holder. Such a storage system can be fixed under the ceiling so that it does not take up space below and does not get underfoot during the autumn-winter season.

14. Pegboard