How to decorate old interior doors made of fiberboard. Renovating and decorating an old apartment door

home

Codes

How to improve the front door from the inside if its condition does not inspire delight? Design flaws on the outside are not as bad as on the inside, because every element of the interior must be flawless so as not to spoil the overall picture. What to do in this case?

There are several ways to transform old door

First of all, you need to take care of completing all the rough work. This is especially true recently installed doors, because you need to complete the work and disguise polyurethane foam to prevent its destruction under the influence of ultraviolet radiation. Also need to close gray wall, level its surface and decorate the opening. It is also important to refine the canvas itself, especially for nondescript metal and old models. Renew worn-out fittings. Don't forget that interior doors must also be in perfect condition. So, let's consider in order how to update the front door and do it all with your own hands.

Slopes

First of all, to give the doorway a complete look from the inside, you need to take care of the slopes. This is a prerequisite, regardless of whether you are repairing entrance or interior doors. Various materials can be used to finish slopes:

drywall;
plaster;
plastic panels;
MDF or wood;
metal carcass;
laminate.

New slopes will make the door more attractive

How to decorate the front door using drywall from the inside with your own hands:

Clear away debris and seal any cracks.
Apply a layer cement plaster and glue sheets of drywall cut to size onto it. If the unevenness is significant, a metal frame is used for installation.
Cover the joints with putty, additionally using sickle.
Prime the surface.
. Then you can paint them any way you like. suitable color or cover it with wallpaper.

If you decide to transform the entrance using overlay panels, mount the frame in advance. Insulation can be laid underneath. The panels are installed both vertically and horizontally using the rack method.

Platbands

Since you have decided to refine the doors, you need to take care of their framing. We are talking about platbands for entrance and interior doors. Usually they come complete with other opening design details. If you purchased only the canvas and frame, you can easily purchase the matching colors separately. They can be made of metal, MDF, wood or pressed paper. Depending on the design, the mounting methods also differ. You can nail them with your own hands onto nails without heads, or place them on liquid nails or polyurethane foam. The best option – telescopic trims, which are attached directly to the box using the tongue-and-groove method, but they are more expensive.

Stylish platbands will help transform the interior

If you decide, also don’t forget about the platbands. If desired, you can make them yourself using wooden blanks. To give them the desired shade, use stain and varnish or paint. It all depends on the style of the room and the type of door. Usually the color is matched to the canvas or baseboard tone on tone, but you can play with contrast if it is appropriate.

Fabric coating

How to decorate an old metal door with your own hands? You can use one of these materials:

dye;
varnish enamel;
self-adhesive film;
laminate;
veneer, PVC or eco-veneer;
thin MDF panels.

Before applying the coating, you need to clean the front door from dust, rust and thoroughly degrease it. Then it is advisable to apply primer and only after it has dried, begin cladding work. MDF panels are attached with glue or using a frame. Self-adhesive is very easy to apply using a soft spatula. The painting methods are self-explanatory. But laminate, PVC and veneer need to be fixed using the hot pressing method. Such work can only be carried out with the door in a horizontal position.

External door covering options

How to transform old interior doors? To do this, you can use the same methods as for the input, as well as others. For example, decorative inserts. Initially, the surface is processed using one of the above methods. Then you can decorate the canvas with glass fragments, colored plastic, stained glass or mirrors.

Upholstery

An old metal door can be transformed not only visually, but also qualitatively with the help of soft upholstery. Dermantin is most often used for this. To create volume, a layer of insulation is placed underneath it. Thus, you will be able to kill two birds with one stone: you will both decorate the canvas visually and provide better heat and sound insulation.

A quick way to transform an old door - spectacular upholstery

How to improve the entrance covering metal door with your own hands:

Remove the fabric from the loops and lay it horizontally.
Measure its dimensions and cut out a piece of dermantine with a margin of 15-20 cm on each side.
Cut sheets of insulation to fit the size of the door.
Glue the insulation with superglue. Try not to leave empty joints. You can place the material on polyurethane foam.
After everything has dried, start working with dermantine. Tuck its edges so that the cuts are not visible.
Secure the upholstery with glue, and to add texture, you can use furniture nails and decorative cord. They need to be hammered into the substrate material, so you can install denser elements in advance according to the diagram.

This decoration method is also used for wooden doors. In this case, things are even simpler, because you can use a furniture stapler.

An important point: since we're talking about Regarding finishing from the inside, it is not necessary to make rollers to seal the narthex, because they will be of no use, and they will only spoil the appearance.

Interior doors

Interior doors require much more attention. They can be made from various materials, which must be taken into account when finishing them. How to improve newly installed interior doors? To do this, you need to perform the same manipulations as for the input ones. That is, first of all, it is necessary to carry out the final finishing of the opening: platbands, seal all joints and cracks, arrange slopes. In most cases, you can limit yourself to completing the door or simply plastering the opening. For more expensive and sophisticated repairs, use decorative panels. If the canvas is far from new, you need to refresh it slightly.

The door can be given a touch of antiquity and it will become the most stylish element interior

How to decorate old interior doors with your own hands:

paint;
wallpaper or self-adhesive film;
cover with stain and varnish;
use thermal overlays (veneer, PVC, oracal, laminate);
insert glass inserts.

You can use special decorative techniques, such as decoupage or artificial aging. This decor looks especially impressive on a wooden door with figured panels. Another similar technique is craquelure. For this, paint or varnish with special properties is used. First, the canvas is opened with a layer of the usual composition. After it dries, craquelure is applied. When dry, it becomes covered with cracks, tearing off the bottom layer. It looks very impressive. To avoid it being too flashy, you can use this decoration method in certain areas, for example, in combination with decoupage.

It doesn’t matter whether you are transforming old doors or improving new ones, the final look depends only on your imagination. Moreover, all this can be done at minimal cost.

Most often, wooden doors are installed in bathrooms - made of solid wood, fiberboard or plastic. Operation under conditions high humidity has a detrimental effect on the appearance of the door leaf: the surface warps, the paint layer deteriorates. In this regard, many are interested in the question of how to restore a bathroom door. Let's talk about everything in order.

Any restoration work begins with cleaning old surface. A wooden door (made of solid wood) is no exception. You will need:

paint remover;
construction hair dryer;
spatula (scraper);
an old iron and a piece of thick cotton fabric;
wood putty, putty;
sandpaper;
door hinges, handles, lock;
set of brushes;
screwdrivers, chisel, hammer, knife and other plumbing tools;
electric drill;
screwdriver;
wooden glazing beads.

Layers old paint needs to be removed

All this needs to be done on initial stage work that begins after removing the doors from their hinges.

Restoration of the door begins after it is removed from its hinges

In some cases, you cannot do without a crowbar, which is used as a lever, supporting the blade from below. Glass inserts (if any) must be removed by removing the beads.

Old hinges can be removed using a screwdriver

How to remove old paint

You can get rid of old paint in various ways.

In the event that you have to remove a thin layer of coating, it is more advisable to use a “wash” - chemical agent acid based. This is the most gentle way. After reading the instructions on the label, apply the product with a brush to the old paint and wait allotted time. After the paint coating has swollen, it should be carefully scraped off with a spatula. You can use a beekeeper's scraper for this.

Door paint remover

It is necessary to protect your hands and eyes: acid can seriously damage the skin and mucous membranes.

A thicker layer of paint will have to be removed with greater effort. A construction hair dryer is used: the heated paint coating swells, after which it is also scraped off with a scraper. This effective method, but due to careless work with a spatula and a hairdryer, the wood may be damaged.

Removing paint using a hair dryer

If it is not possible to use a hairdryer, the old “old-fashioned” method will help: spread a moistened coarse cotton cloth on the canvas and press it with a heated old iron. After a few seconds, the iron and rag are removed and the paint is cleaned off. This method is far from the best: it is difficult to clean uneven surfaces. In addition, the soleplate of the iron and the rag quickly become dirty.

How to restore a solid wood door leaf

Fragments of old paintwork remaining after cleaning the canvas can be removed using sandpaper. First, use coarse-grained sandpaper and then gradually move to “zero” sandpaper. Sanding is carried out along the fibers so that transverse lines do not form.

Sanding the cleaned door leaf with a sanding machine

It is necessary to inspect the door leaf to identify defects. If there are any, you need to get rid of them. Small cracks are eliminated using acrylic putty. Large chips are more difficult to remove. In some cases, it is necessary to cut out a fragment of the canvas, and then make an overlay from wood of the same type. It must be carefully adjusted to size and secured with glue. Small gaps are also sealed with putty. The next stage is applying new paint. You should choose the right color: it should be in harmony with the elements of the rest of the bathroom decoration. Among stains and paints, you need to choose moisture-resistant ones: they will last longer. The coating can be applied with a brush, roller, but best of all - with a spray bottle. If necessary, apply several layers. After such restoration the door will look like new.

DIY door painting

How to update a bathroom door made of fiberboard

How to update a bathroom door if it is made of fiberboard? This material is not very resistant to high humidity. Please note that some of the above technologies cannot be used. In particular, the use of a soldering iron is not permitted. Coarse sandpaper can ruin the surface. IN in this case you will have to use an iron with a cotton rag or remove old paint. Use the scraper carefully so that sharp edges do not damage the outer coating, the thickness of which is a maximum of 4 mm.

After removing old paint, use a spatula to clean the door leaf

After careful sanding with a zero polish, you need to reapply paint. But The best way restore the doors - cover them with veneer. This way you can create the illusion of expensive material. The price of oak veneer is about 1.5 USD per 1 m². Don't forget about door frame: It should also be updated. It will most likely not be possible to replace it, as this risks damaging the ceramic tiles.

Restoration of plastic doors

Plastic doors look presentable, but over time, dirt penetrates into the micropores and the door leaf loses its original appearance. You can update it in the following ways:

cover with vinyl film that imitates natural wood or marble;
paint with polyurethane-based paint;
cover with veneer.

In any case, the door leaf must first be cleaned and degreased. They do this with conventional means household chemicals. You can paint with paint to which a hardener is added and then filtered. During the work, use a spray bottle: this way the coating is applied in an even layer. On average, for one layer to dry completely under conditions room temperature 9-10 hours are needed. Complete crystallization of the paint occurs only after 7 days.

Aerosol cans can be used to paint the door leaf.

Vinyl film can be used for decoration: using different colors patterns and drawings are created. This technique is best used if the canvas is flat, without panels. It is recommended to first treat the canvas with soapy water. This will help avoid the formation of soap bubbles and correctly connect adjacent elements. If you need to cover the entire surface at once, you will need the help of a partner.

Before painting, a new lock is inserted into the door, handles are attached, and then the door leaf is hung on new hinges.

Installing a new lock on a restored door

If you do not have the necessary experience, it is better not to take on such work. Otherwise, the door leaf will be damaged. It is better to turn to professionals for help: with their efforts, the door will look like new again.

Video: how to update doors using stickers

Doors play an important role in the design of premises. There are many in stores different models, but quality ones cost big money, but I usually don’t even want to look at cheap ones. There is a good option - to update old doors with your own hands. There are many techniques, and not the most complex ones, that can correct the situation for little money.

Preparation

Whatever method you choose to update an old interior door, you will need to carry out a series of preparatory work. Usually old painted specimens are going to be decorated. Painting is usually amateurish, so there are more than enough unevenness, sagging and other minor defects. They all need to be leveled.

Remove the door leaf from the hinges and lay it on a flat surface. You can - on a trestle or a table. We take wood putty (even if they are from or) and cover all the holes, chips and depressions with it. After drying, we move on to the next stage - sanding.

We take sandpaper with coarse and fine grains. We process to achieve a smooth surface. If you work manually, it takes a lot of time and effort. With a hand sander, work moves faster. If painting is planned next, we try to achieve as smooth a surface as possible. If you plan to decorate with wallpaper, fabric, self-adhesive film, you don’t have to bring it to perfection, but it should still be exactly right.

Next, remove the dust and wash off the residue with water and diluted dishwashing detergent. Dry it. Further actions depend on the selected update method. If you are going to glue fabric or wallpaper of any kind, you can prime the surface (with thinly diluted glue or a special primer). After the primer has dried, you can glue the selected type of decor or apply paint. By the way, if you are going to paint the doors, you need to select the same type of paint that was there before, otherwise you will have to remove everything to a clean base, and this is very difficult.

Renew old doors with wallpaper

The simplest and affordable way Make old doors attractive by using wallpaper. They do not necessarily have to be the same color as the walls, although this option is not excluded. First, prepare the canvas as described above, and then you can start finishing.

The procedure for wallpapering doors is as follows:

Photo wallpaper

Modern photo printing allows you to transfer three-dimensional images onto paper. It will turn out very beautiful. Moreover, you can print any image of your choice. In general, any. Photo printing is usually done by advertising agencies, sometimes by printing houses. Contact them, explaining what you need (have a flash drive with the selected design and exact dimensions canvas on which you want to print the image). Having received the required image, we glue it on the door according to the method. described above.

Wallpaper with moldings

If you stick foam or polyurethane moldings and rosettes onto plain wallpaper, the style will completely change. This type of door will suit classic interiors or rooms, using a colorful background and a different form of moldings (with curves) can be decorated in Provence style.

The work is no different from the sequence described above. We take the prepared doors with a leveled surface, spread them with glue, and glue the wallpaper.

By leveling the panels with a rubber roller it is not difficult to achieve good results, but a certain number of small air bubbles remain. To remove them, take a special plastic spatula (any hardware store has them), and use it to finally remove the air from the center to the edges. Also, use this spatula to smooth the wallpaper joint, if there is one. It is quite possible to achieve that the joint will not be visible.

Trim the edges of the wallpaper with a wallpaper knife. This must be done before the wallpaper is softened by the glue, otherwise later it may “stretch” behind the blade and tear. Leave to dry. After 12 hours or a day - depending on the temperature and humidity in the room - you can continue decorating the old door.

Carefully apply the markings with a simple pencil. When everything is drawn, use a tape measure to measure the required length of the pieces of molding. We cut it off and file the edges at an angle of 45°. We take a suitable glue (PVA is possible) and carefully smear the back surface of the cut elements, glue them according to the markings, and leave them to dry.

Using the same principle, you can update old doors so that the style will be different. Several examples in the photo gallery.

Beautiful wallpaper with a matching pattern is the secret to the attractiveness of this door decor
Moldings were glued to the painted doors, which were then painted with “gold” paint

Designer decoration of old doors

If you are interested in designer items, you can try turning it into an art object. The good news is that you don’t need to prepare it: the unevenness and sagging will be hidden under the design.

The decorating process begins with the making of papier-mâché. Take egg trays, sprinkle them with water, knead them with your fist, trying to level the surface. They will tear during the process, this is normal and even good - we need small pieces. These almost flat fragments, on liquid nails or using glue gun, glue to the surface in any order.

Used are lids, rings, a small perfume bottle, a small non-working PC mouse, the remains of a mosaic, everything that comes to hand. You will need a lot of trash, you can collect it ahead of time.

When most of the surface is “decorated”, take acrylic silver paint in cans (you need 2 pieces) and paint the decor well. When choosing paint, it is better to take an expensive one, in particular German, so that it does not crumble later.

Decorating doors using decoupage technique

Romantic or “cheerful” door designs can be made using decoupage. To work you will need:

napkins with a suitable pattern;
PVA glue (about 200 ml);
natural bristle brush;
acrylic lacquer.

We prepare the canvas as described earlier. We prime and paint it in a suitable color. After the paint has dried, we begin decorating. Take a pack of napkins you like and separate upper layer, which is with a picture.

We tear napkins with a pattern lengthwise into three strips. We tear it, not cut it. We want a slightly uneven edge. Two strips on one side have a smooth edge; we put them to one side. We tear the middle part into squares. The best option is if they are 3-4 cm on a side.

Take glue, a brush, and a small container. In it we mix PVA with water in equal proportions.

Next, we begin decorating the door with our own hands. We take a strip with a smooth edge and apply it to the area to be decorated (in this case, it is the center of the door leaf). We dip the brush in glue and begin to smooth the fragment in different directions. Wrinkles will form, but this is just a good thing - the finish will be more textured, so there is no particular need to even them out. When wet, napkins are very delicate and elastic, remember this when working and act carefully.

Gradually we make a frame with one smooth edge. The second one comes out carelessly torn.

Filling the middle of the “frame”

When the entire surface is filled, leave it for a day - wait until the PVA dries. Next, take acrylic varnish and cover our decor with a soft brush. To prevent it from smelling, we use varnish on water based. It's a little more expensive, but it doesn't give you a headache.

The beauty of decoupage is that we get beautiful things at minimal cost.

Decorating a door with self-adhesive film

Perhaps the easiest way is to update old doors using self-adhesive. All you need:

the film itself,
a spray bottle containing soap and water;
plastic spatula or soft cloth;
sharp knife (can be wallpaper).

This film is available in different options— there is a plain matte or glossy one, there is a plain one with holographic patterns, a wood look, there are even special ones for covering doors with photo printing applied.

Regardless of the type of film, it is glued in the same way. In this case, we decided to update the old doors using a photo printing option. One point: before gluing, remove handles, latches and other door fittings.

For the decor to be of high quality, the surface of the door must be clean, even and smooth. If you processed it with a sander before, try gluing a small piece of film. If it sticks well, everything is great. If it “doesn’t stick,” you’ll have to prime the doors and then paint or varnish them to create a smooth surface.

Take a spray bottle and evenly wet the surface of the door.

We shave the film, remove the protective layer from one of the corners, and also spray it. So, by wetting, we separate the protective paper from the top along the entire width of the film.

You should get a strip 15-20 cm wide. Do not remove any more so that the film does not stick to the canvas. We apply the peeled part to the upper edge of the door leaf (or the area to be decorated), it quickly sticks. Try to apply it evenly right away, but the position can be corrected - that’s why we wet the surface so that the film could be moved. If you pull it, it moves little by little.

After making sure that the canvas lies flat, take a plastic spatula (for wallpaper) and smooth the surface with it, moving from the center to the edges. The goal is to remove all the air. Since the surface is wet, this is not difficult - the water displaces the air.

Everything else is simple. We pull down the protective paper, peel off the strip, glue it and so on - to the very bottom of the door. If you glued for a long time top part, the bottom one may dry out, so periodically check whether the doors are dry and spray again if necessary.

After all the film has been glued, use a sharp knife to cut off the excess along the edges. All that remains after this is to install the fittings.

Door decor with stencils

Old doors can be updated using printed drawings. It’s just a pity that not everyone has artistic talent. But in this case, the problem is solved with the help of stencils. You can draw them yourself, or you can find an image you like, print it on thick paper, cut out the design with a sharp knife, leaving jumpers in places. Now the stencil is ready.

The disadvantage of a paper stencil is that it doesn’t last long. If you need a “long-lasting” one, you need to transfer it to a transparent thick film. The technology for cutting out stencils for door decoration is shown in more detail in the video.

The drawing can be anything. Both geometric and floral, stylized images of animals, birds, and cartoon characters are popular.

The nuances of restoring an old door with your own hands. Ideas and methods, photos.

A person associates his home with a place of rest. Therefore, he tries to create comfort, choose an interior and a pleasant color scheme to fully realize this.

On the other hand, everything in our world tends to become outdated and destroyed. Our homes and theirs interior decoration- no exceptions.

By renewing anything around us, we awaken creative energies within ourselves and feel like creators.

Although most species interior works require special deep knowledge and skills to complete them, we are quite capable of updating interior doors on our own.

Let's talk about the features and methods of reconstructing old doors in more detail.

How to make a new one from an old door with your own hands: options, photos, tips

photo of an old door before and after restoration using decoupage technique

It is important to prepare it before updating the old door:

remove the doors from their hinges and place them on a flat horizontal surface
fold all accessories separately or prepare them for disposal if they become unusable
If there are glass elements, carefully remove the glazing beads and then remove the breakable parts
if the door has been painted, turn on a hair dryer and gradually warm up its surface
equip yourself with a piece of coarse sandpaper and remove the bubbles of old paint
replace the paper with another one with a finer abrasive and go over the entire surface of the door again
do final sanding sandpaper with minimal abrasiveness
treat the door surface with a special putty for wooden products
After complete drying, sand the doors in 3 steps with sandpaper of varying abrasiveness.
fix the result with drying oil or stain
then carry out those types of work that are necessary for updating appearance doors
if there were glass elements in it, put them first and then new beads in a fresh color/design

As examples, look at the options for updated doors in the photo.

embodied ideas for decor and restoration of an old interior door, example 1

embodied ideas for decor and restoration of an old interior door, example 2

embodied ideas for decor and restoration of an old interior door, example 3

embodied ideas for decor and restoration of an old interior door, example 4

embodied ideas for decor and restoration of an old interior door, example 5

embodied ideas for decor and restoration of an old interior door, example 6

embodied ideas for decor and restoration of an old interior door, example 7

embodied ideas for decor and restoration of an old interior door, example 8

embodied ideas for decor and restoration of an old interior door, example 9

embodied ideas for decor and restoration of an old interior door, example 10

embodied ideas for decor and restoration of an old interior door, example 11

embodied ideas for decor and restoration of an old interior door, example 12

embodied ideas for decor and restoration of an old interior door, example 13

embodied ideas for decor and restoration of an old interior door, example 14

embodied ideas for decor and restoration of an old interior door, example 15

embodied ideas for decor and restoration of an old interior door, example 16

embodied ideas for decor and restoration of an old interior door, example 17

embodied ideas for decoration and restoration of an old interior door, example 18

embodied ideas for decor and restoration of an old interior door, example 19

embodied ideas for decor and restoration of an old interior door, example 20

embodied ideas for decor and restoration of an old interior door, example 21

embodied ideas for decor and restoration of an old interior door, example 22

embodied ideas for decor and restoration of an old interior door, example 23

embodied ideas for decor and restoration of an old interior door, example 24

embodied ideas for decor and restoration of an old interior door, example 25

embodied ideas for decor and restoration of an old interior door, example 26

How and with what you can update the color of old wooden doors: ideas

girl paints an old wooden interior door with white paint

After you have completed the work of restoring the surface of the old interior door, choose a new color for it.

Among the ways that can help you in this moment, we note:

Painting with stain, paint or opening the wooden surface of the door with varnish.
Remember, for the best result, brush along the fibers, then all the cracks will be filled with dye.
Accents on moldings, or painting protruding door parts with contrasting or similar colors. If such elements are missing, glue them from wooden or polyurethane slats and paint them.
Artistic painting, coloring through stencils.
The method is suitable for creative owners who want to bring originality to their interior.
Pasting wallpaper, large drawings on paper, pieces of fabric. Decoupage.
In this case, follow all the requirements for fixing the material on the surface of the door - soak it with water, glue, and treat it with a stream of hot air on top.
Stained glass painting on glass.
If you are good at drawing or have some interesting stencils, buy special stained glass paints and decorate the glass elements of your old door.
Pasting vinyl stickers.
Note that this method saves you time preparing the old door. In other words, you can not even remove it from the hinges, but immediately glue the vinyl elements.

How and with what can you update varnished doors?

a man removes old varnish from doors to restore them to a new design

To carry out restoration work, remove the old varnish from the door using one or more of the following methods:

sandpaper
grinding machine
chemical solvent

The first method was discussed in the previous section. The second method will significantly speed up the process of removing the old varnish coating. And the third has one nuance - the varnish can selectively remain on door leaf. Therefore, be sure to polish the latter.

After removing the old layer of varnish, sanding and drying the doors, decide on their new design, for example:

apply new varnish or laminate,
paint it the color you want,
stick wallpaper/photo wallpaper or other self-adhesive tape with imitation, for example, natural wood,
apply hand painting, copying a specific drawing, or using a stencil,
decorate the door by gluing bulk cereals - rice, buckwheat. Be sure to apply a layer of varnish on top for better fixation of the material.

How and with what can you update veneer doors?

photo of updated old veneer doors

One of the most common problems with veneer doors is swelling of the panel in certain areas. Therefore, first prepare it, carry out restoration measures before updating.

The following will help eliminate the problem of canvas swelling:

Iron.
Heat it on medium mode and iron the swollen surface of the door folded on a horizontal stand.
Wet rags.
Moisten a piece of cloth with water and spread it on the problematic surface of the door. After a quarter of an hour, remove and wait until dry.
PVA glue.
Fill it into a syringe and carefully insert it under the swollen surface of the door. Smooth the area with a dry cloth.

To eliminate cracks and chips on an old door made of the material in question, stock up on strips of veneer of a similar color.

Cut strips that match the parameters of the surface being repaired.
Cut off the excess with a scalpel after applying it to the site of the chip/crack. Please note that the fibers of the patch should be perpendicular to the door being restored.
Treat the door leaf with a special putty and wait until it dries completely.
Use double-sided tape to secure the veneer strips.
Sand the joints.

When your old door has only minor scratches and chips, treat them with wax:

liquid
pencil

In the first case, drop a couple of drops into the crack and immediately wipe with a dry cloth to remove excess. Before doing this, be sure to clean the door from dust and dirt, and also sand the surface.

In the second, tear off a piece from the wax pencil, knead it in your palms and stick it on the problem area. Wipe off the mark with a rag. Only do this on a previously cleaned and prepared door.

The following will help you update a prepared old veneer door:

If you masked chips and scratches on the door with wax, remember that varnish and paint will not cover them. Or they will linger on it for a short time and then fall off.

How and with what can you update paneled doors?

old panel doors after repainting, decor options

Paneled doors in the interior look interesting. However, it is not always convenient to treat their worn surface. We won't go into details. Let's look at restoration options.

Successful solutions:

painting in several colors highlighting protruding areas
wallpapering in segments, adhesive tapes along the contour, on panels
decoupage of individual segments
varnish coating

The cardinal method is to disassemble the door panels and replace them with laminated hardboard. To do this, you cover the door frame with it and select the color especially carefully when gluing its ends.

If there is glass in the door, decorate it with special paints or imitate stained glass. Stencils for decoration are also suitable.

How and with what can you update painted doors?

a man paints old previously painted interior doors

Your first task is to remove the old paint from the doors and prepare them for restoration work. Their sequence:

decide on the location of the door in space - either lay it on horizontal supports, or remove it from its hinges and leave it vertically,
use a spatula to go over the entire surface and remove the layer of old paint,
sand with sanding paper,
treat with a special primer for wooden surfaces,
let dry and sand again,

Seal off areas of the door that you do not plan to paint or open with varnish.

How and with what can you update paper doors?

updated paper doors in the interior

Update paper doors lightweight materials, which will not burden them and cause fabric ruptures. For example:

self-adhesive film
decoupage
gluing individual elements, for example, paintings, three-dimensional drawings
painting with paints
stencils

How and with what you can update an old door frame: ideas, photos

a man measures the level of a door frame during its restoration

You should remember about door frame restoration when you are updating an old door leaf. Of course, fiddling with the first one is less convenient, since it cannot be removed.

The door frame processing technology is similar to those discussed above about doors. Choose carefully the shades of paint and stain, as well as the color of the self-adhesive tape and wallpaper, so that this area on the wall is in harmony with the updated door leaf.

Below are a number of interesting door frames after DIY restoration.

updated door frames to match the interior and doors, example 1

self-adhesive door frame decorative elements, example 2

self-adhesive door frame decorative elements, example 3

How and what to decorate a door beautifully with?

beautifully pasted interior door after renovation

Among the common ways to decorate an old door is gluing a new covering entirely or in fragments.

For this you will need:

textile
leather and its substitutes
photo wallpaper
metal rivets, beads
patchwork
cut fragments of a picture, for example, a world map

To stick this or that material, select an effective adhesive, for example, PVA glue, special for wallpaper, tape, double-sided self-adhesive tape.

How to beautifully wallpaper a door?

old door covered with wallpaper after renovation

The main thing is to follow the wallpapering technology.

First, prepare the door leaf for renovation. The technique was presented in the first section of the article.
Decide on the color and texture of the wallpaper.
Apply special wallpaper glue to the surface of the door and attach a paper decorative element.
Level the result with a dry cloth.
Trim any exposed edges with a utility knife.
Wait until the wallpaper on the door is completely dry.

If desired, add decor:

molding
design features, for example, small shells and cut nets, glued on top and covered with paint

Besides regular wallpaper popular:

photo wallpaper depicting three-dimensional objects/paintings
decoupage
self-adhesive tapes

How to update an outdated metal front door?

old metal Entrance door after update

Metal doors also tend to become morally and physically obsolete. If you set out to update them, keep in mind that the approach and methods will be different for the external and internal parts of the front door.

So, inner part will update the following solutions:

drawing a picture using a stencil
art painting
full door mirror
dermantine upholstery
self-adhesive film
laminate

And for outside doors are suitable:

MDF panels
laminate

To secure any material to the surface of a metal door, you will need an adhesive liquid, for example, liquid nails when working with wood.

How to beautifully decorate an old nursery door yourself: ideas, photos

DIY updated door in the children's room

A children's room is an area of creativity, leisure and intellectual work for a child. Consult with him before you start updating the door to the nursery.

Even better, involve your child in the process.

For inspiration, let's add a row ready-made solutions door decor for a children's room.

decor options for doors to a children's room after updating them, example 1

decor options for doors to a children's room after updating them, example 2

decor options for doors to a children's room after updating them, example 3

decor options for doors to a children's room after updating them, example 4

decor options for doors to a children's room after updating them, example 5

decor options for doors to a children's room after updating them, example 6

decor options for doors to a children's room after updating them, example 7

decor options for doors to a children's room after updating them, example 8

decor options for doors to a children's room after updating them, example 9

decor options for doors to a children's room after updating them, example 10

decor options for doors to a children's room after updating them, example 11

decor options for doors to a children's room after updating them, example 12

decor options for doors to a children's room after updating them, example 13

How to beautifully decorate an old kitchen door yourself: ideas, photos

updating the old one kitchen door mosaic

To change the kitchen door after restoration, choose a concept for its decor. It can be:

painting
opening with varnish
decoupage
gluing wallpaper and any adhesive surfaces
art painting and stencils
stained glass elements
mosaic and gluing of loose, small elements

See below for implemented ideas with updated kitchen doors.

embodied ideas for restoring an old kitchen door in the interior, option 1

embodied ideas for restoring an old kitchen door in the interior, option 2

embodied ideas for restoring an old kitchen door in the interior, option 3

embodied ideas for restoring an old kitchen door in the interior, option 4

embodied ideas for restoring an old kitchen door in the interior, option 5

embodied ideas for restoring an old kitchen door in the interior, option 6

embodied ideas for restoring an old kitchen door in the interior, option 7

How to beautifully decorate an old bathroom door yourself: ideas, photos

options for updated bathroom doors in the interior

The bathroom is a special place in any home. Here we bring beauty and relax after everyday work. I want the door to have its own style.

If you're currently upgrading, consider these ideas:

drawing a picture through a stencil
self-adhesive film
imitation of stained glass and paneled elements
combination of colors when painting fragments
mirror interior
photo wallpaper

See more details implemented ideas on the decor of the bathroom door in the pictures below.

design options for bathroom doors after do-it-yourself renovation, example 1

design options for bathroom doors after do-it-yourself renovation, example 11

design options for bathroom doors after do-it-yourself renovation, example 12

So, we looked at the features of restoring an old door in a house on our own. We got ideas from looking at photos of finished ideas. We learned how to properly prepare the door surface for renovation.

If you feel potential, but don't have the courage to take the plunge, big door, start with the elements of a doll's house. Your child will appreciate creative solutions for decorating doors, and you will gain courage and realize your desires to update them in your home.

Video: how and with what to update old interior doors?

Despite their unlimited service life, they wear out quite quickly. The material suffers from deformation and drying out, coatings wear off or become faded.

You can replace such canvases with new ones, but this is a big expense, a waste of time for replacement, and subsequent renovation work after installing them.

Therefore, the easiest way is to put these structures in order yourself, that is, give them a second life by updating their coating and eliminating defects. How to restore old doors? More details later in the article.

In order to restore doors correctly and efficiently, you need to know how it is done.

Usually interior paintings suffer from mechanical impact and moisture.

Plastic varieties are more prone to scratches.

To make them invisible, they must be gently polished.

Painting. A wooden door or one with veneer inserts is easiest to varnish or paint. It is better to paint a wooden surface using a special brush or spray. A wooden surface should be painted and varnished by brushing along the fibers, then the material will lie smoothly, filling all the unevenness, chips and other defects.
Decoration. To give the updated canvas brightness, you can use other shades to create a new image. You can paint the canvas with one color, and the protruding parts with another, contrasting with the main selected shade. If the surface is smooth, then it is recommended to use carved slats made of wood or polyurethane, gluing them to the surface to be treated, after painting them in a suitable color.
Pasting using roll wallpaper, colored paper or fabric. They often offer to stick special photo wallpapers onto a smooth canvas, which are sold in stores or can be easily purchased online. The design can be styled to match the room. For the nursery, drawings and reproductions from children's magazines are selected. For the kitchen, choose pages with dishes or vegetables and fruits. Before gluing paper sheets, they must be kept in water, then PVA glue is applied to the entire sheet and glued to the canvas, smoothed thoroughly. After the paper and glue have dried, the surface is coated with colorless varnish to preserve the work longer. In the same way, you can cover the surface of the old material with fabric.
Vinyl stickers. When pasting vinyl stickers It is not necessary to clean the canvas from old paint and eliminate irregularities. The stickers will hide all the defects, and you can paint them after that. They must be glued to a degreased surface, after cleaning the area with an alcohol cleaner. Remove the backing from the sticker and apply it to work area, smooth out thoroughly. Only after this can you remove the film protecting the front side.
Cereal decorations. In an original way decoration of an old door is considered to be an image of drawings made from bulk materials. Rice and buckwheat are ideal for this. The grains should be glued using PVA glue or standard wallpaper. After the drawing has dried well, the canvas is covered with several layers of colorless varnish. Dry cereal, and even under a layer of varnish, is stored for a very long time.

With a little effort and imagination, there will be no need to figure out how to restore old doors at home. Updated interior doors will add warmth and comfort to your home, and also improve the interior of the apartment.

Updating an old door with glass

How to restore old doors with glass is not an idle question at all.

Glass becomes cloudy over time, acquires scratches, and therefore when updating it must be restored or replaced with a new one.

To remove old glass, you need to carefully remove the glazing beads that hold it in place.

You can replace the glass with a modern one: frosted, corrugated, colored, with a pattern or photo printing.

To correctly insert new glass into the door leaf, you must do the following:

Measure the parameters of the opening in the door leaf where the glass will be inserted.
Cut the glass to the required size so that it can fit securely into the opening, for which it must be 5 mm shorter than the required size on each side. To cut out a piece you will need a glass cutter and a metal ruler.
Insert the glass into the opening, previously treated with sealant, and secure it with glazing beads, securing them with thin nails.

Glass with hidden fixation is more difficult to insert; complete disassembly and unscrewing of the bolts will be required in order to remove it old part and also insert a new one. Negative point such a replacement is the possibility of loss correct sizes canvases. In this case, it is necessary to straighten it using a plane.

If you insert old glass, it must be brought back to normal. Clean the old one with a scraper, acetone or blade. Polish small scratches using toothpaste.

Renew the glass with a film with a pattern, paint it or make a stained glass window on it. It is necessary to use fresh glazing beads and replace the fittings with new parts.

Instead of glass, you can insert an acrylic unbreakable mirror. It is light and durable, easy to cut and highly decorative. Then the door will look like new and will delight residents for a long time.

Fiberboard canvases

This canvas is slightly different from works with wooden surfaces. The thickness of the fiberboard surface reaches only 4 mm, so it is necessary to remove paint from it with extreme caution.

Cannot be used for this blowtorch– you can use an iron, wrapping it in a towel if you don’t have a hair dryer.

After sanding, the canvas is either varnished or painted new paint. But there is a restoration method that allows you to turn a thin canvas into a natural one. wooden door– this is the implementation of veneering of the canvas.

Veneer parts are sold in special stores. You can glue it using an iron, heating the surface, because it already has an adhesive base.

You should act carefully so as not to overheat and burn. The glued parts can be treated with stain and varnished. Decorate simple door can be done by gluing relief strips onto its surface.

We should not forget about the restoration of the door frame - it must correspond to the updated canvas. By replacing the fittings with new, more modern ones, you can increase the service life of the door.

Plastic products

Most assume it will last forever and its dazzling snow-white look will not run out. However, even plastic products will eventually require replacement or restoration.

old plastic door can be restored in several ways:

Painting the door. First you need to remove the old one protective film from plastic. Then wash the surface well using special means. The main difficulty in applying paint to plastic is that the liquid in pure form cannot be applied. You should add a little hardener to the paint and then filter it. To the surface plastic products The paint is applied using a spray gun in one layer. Next, let the paint dry and install the door in place.
Vinyl film sticker. If you don’t have the opportunity or desire to paint, you can stick vinyl film on the old door by choosing a suitable pattern and color. To ensure high-quality gluing of the film, the surface of the plastic must be degreased and then washed with soapy water. Apply the film to a clean and dry surface and smooth it, after a few seconds you can remove the white base.
Veneer covering. Also treat the surface of the door and glue the veneer parts onto it using a hot iron. This option is acceptable and reliable. Natural material lasts longer than artificial panels.

Don’t forget to update the door frame, because it cannot be replaced; gaps may form between the frame and the door leaf. The fittings also need to be replaced and the door will be like new.

What about metal?

You can update not only the interior doors, but also the entrance doors made of metal. To do this, it should be removed and placed on a horizontal, flat surface, this will make it more convenient to work. Then execute in the following sequence:

Remove or cover with construction tape the fittings: peephole, handle and other components.
Drill or wire brush clean areas damaged by corrosion. Sand the surface of the canvas with coarse sandpaper, remove dust with a vacuum cleaner and treat the canvas with a solvent.
Treat the surface with a special polish compound, but intended for cars. Putty cannot be used for wooden products - it gives poor adhesion to metal surface. Car polish will repair all dents and scratches that occurred during the rust removal process. Give a smooth surface using a spatula and let the canvas dry for 30-40 minutes.
Polish the surface to be restored using fine sandpaper, wipe with a damp cloth and degrease using a special construction product to remove fat.
Prime the surface with a metal primer designed to combat corrosion. It is convenient to apply it with a roller or narrow brush. Let it dry and sand again with fine-grit sandpaper.
Paint the surface with the chosen paint in 2-3 layers - it is important to achieve the desired rich result. Each new layer is applied only after the previous one has completely dried. For painting it is recommended to use a roller, brush or spray gun. You should protect yourself from paint exposure by wearing gloves and a respirator.

The door frame should be restored in the same way.

Then remove the fittings from the tape or reinstall them and hang the door in its place.

If only a section of the canvas is damaged, you can renew only that area, although this will require careful selection of paint according to tone.

Restoring old doors with your own hands is an interesting and exciting job.

You can choose an acceptable canvas, choose suitable material and get creative with the decor.

In addition, you can save significantly on replacing doors, and this is an important fact for the family budget.

Do-it-yourself updated doors are a source of pride for the owner of the house. You can see how to repair them in the video:

Sections