Ideas for unusual flower pots with your own hands. DIY hanging planter How to make a hanging planter

home

CCTV

The main task facing DIY flower pots– make an unusual, beautiful, functional design for flower pots. Many people often confuse these two concepts: a flowerpot and a pot, because the main task of a pot is the high-quality growth of the plant, which is impossible without drainage, the correct volume and composition of the soil. And the main task of the flowerpot is to make the appearance of the pot unusual, to decorate it so much that it turns into one of the.

Make flower pots with your own hands

Our article today will be devoted to in various ways creating a spectacular decor that could be used in the apartment, but we’ll also look at a few. In any case, the main thing to understand is that make flower pots with your own hands Anyone can do it, and there is nothing difficult about it at all, no matter what technique or material you choose for yourself.

First DIY flower pots, photo which you see above is intended solely to decorate the appearance of an ordinary pot or even a flower vase. The principle of its assembly is quite simple - several dozen identical elements are used, which must first be assembled into a single panel, and then the container with earth itself must be wrapped with it. As elements for assembly, you can use wooden skewers, ice cream sticks, or, as in our example, colored pencils of the same length. The sequence of making the pots is as follows: it is necessary to lay out the pencils on the table in one row, aligning them so that they form an even line along the bottom border, and total length the entire row was the circumference of the desired flowerpot. After this, you take a piece of rope, glue it and apply it to the pencils one third of the length, after which you glue the second piece of rope in the same way, stepping back about five centimeters from the first. Once the glue dries, the pencils will be firmly attached to the strings and will be able to curl around the pot. This design resembles a bamboo mat, which is often used for serving. Shut down satin ribbon, which wraps around the bottom of the craft.

Unusual containers for succulents and other unpretentious plants indoor plants have long become one of the ways for designers to demonstrate their creativity. After all, such green pets can survive in vertical gardening conditions and in other extreme creative conditions. After all, for begonias, violets or azaleas, first of all, the conditions for their normal growth, humidity level and nutrition must be met. Whereas a cactus will grow well in a pot that is decorated with an old book or its imitation. As evidence, there are examples that you can see in the top photo. A hole is made in the surface of the cover or inside the book, which is filled with gravel or crumbs. Inside, under a layer of pebbles, there is a pot of soil in which the plant itself is located. Since you will still have to water your green pet, albeit not so often, it is best to cover the inside of the cut-out paper pages at the ends with varnish or diluted PVA glue so that a waterproof film is formed on the paper surface.

DIY flower pots for indoor flowers

Unusual textures or uses non-standard forms typical for fashionable options DIY planters for indoor flowers. Particularly popular in Lately purchase, and, as it turns out, you can knit not only a blanket or pillowcase, but also covers for decorating flower pots.

For knitting, you can use both knitting needles and a hook, the fabric in in this case will differ in appearance. If you make weaving using knitting needles, you can decorate the knitting with braids, cones, weaves, as if you were weaving a real sweater, only for plants. Well, crochet products can be decorated with appliqués and embroidery, which will look very organic. Knitting is done using a circular element, which is widely used for napkins, and then, when the desired diagonal of the craft is reached, you stop adding loops, knitting only rows of the same size. In this case, the canvas will naturally grow in height without increasing in diameter. Only at the end, when there is a slight increase in the diameter of the container, you can also add required amount loops The main thing in such crafts is to make them strong enough so that, if necessary, you can hang or form vertical landscaping elements, as is the case with DIY macrame flower pots, diagrams which you can find on the net. It is also important that knitted covers can be easily removed if you need to wash or clean them.

If knitting and complex types of needlework are not yet available to you, then flowerpot covers can be made even more in a simple way, for this you will need several knitted pullovers with a classic pattern or ornament. Several pieces will be needed because it is desirable that such covers are not single, but represent a series, then the composition will look more harmonious. In the photo you see an example of such a craft, which is performed using a ready-made base. It can be any ready-made vase, which you can significantly decorate in this simple way.

As for DIY hanging flower pots, photo with an example of the creation of which you see, then they belong to a glorious family or apartment. The beauty of such works is that, in addition to the ease of creation and availability (read, free) of source materials, they will work great for decorating flower beds, balconies, and open spaces, because they are not afraid of snow and rain, bright sun and strong wind. As you can see, one single bottle of dark plastic is enough for you to place one flower pot, however, the bottle changes beyond recognition during the process. If you can’t draw a template for the faces of a bunny and a bear yourself, you can find suitable images on the Internet.

DIY flower pots for the garden

The next big section is dedicated to creating DIY flower pots for the garden. Increasingly, besides summer residents, they are also interested in other methods of placement on the site flowering plants, because the more such beauty there is around, the more you will be inspired by being at the dacha.

The method for disposing of old beach slippers, which is proposed above, is suitable for all lovers. In addition to the flip-flops themselves, you will also need ceramic tea cups, preferably matched to the color of the shoes. Thanks to the design of the elastic bands on the flip-flops, the cup will be securely fixed inside, provided that the plant and the soil do not weigh too much. By the way, in this case the cup can be turned from an integral part of the flowerpot into independent capacity, if you use a suitable drill to make several drainage holes in its bottom.

can also be born on the basis of global design trends. If earlier you could simply knock down a box for seedlings using boards, now a flowerpot, which is a beam with a cut out middle, is already a fashionable designer pot for plants. Moreover, it is recommended to artificially age such a box a little; to do this, it is impregnated with stain, tinder sandpaper or other similar materials, and then covered with a protective glaze, so that the decor can safely remain outdoors in any weather conditions.

Often at the dacha there is enough a large number of old baskets, wicker stands, which individually have a completely unpresentable appearance. However, if you use them in combination with each other, making, for example, complex vertical landscaping of a fence, then such a composition will immediately look not old, but vintage, adding appearance The site has many advantages.

Exactly the same principle is used as the basis for the next idea, only instead of boring pots and baskets, pot-bellied ones are used in this composition. ceramic teapots, some of which you can find on your farm, and the other part you can buy at the flea market. When they form one common row, it looks creative and certainly attracts attention.

DIY hanging flower pot

There is also nothing complicated about the part of the site that is occupied by trees. You just simply need hanging flower pot. With your own hands it can be made using available materials, or you can weave it yourself using the macrame needlework technique.

The main task of any such suspension system– create fastenings that would keep the entire system in balance so that the pot is in a level position and the plant can feel comfortable. There can be three or more fastenings, since the system can be kept in balance with two ropes only if there are special lugs exactly on the sides, and even then, the reliability of such a craft will be questionable.

As we can see from the photographs decorating this section, the material for the flowerpot itself can be an old basketball ball or floral flax, which is used for eco-crafts.

DIY macrame flower pots

Always look beautiful DIY macrame flower pots, this ancient handicraft allows you to create reliable structures, in which, in addition, thanks to various combinations of knots and loops, you can add various decorative elements: stone and wooden beads, flowers made of plastic or clay.

For such elegant DIY flower pots diagrams You can find them in magazines devoted to this type of needlework, and you can either buy materials in a specialized store or order them using online resources. In any case, the cost of such a craft will even allow you to spend a certain amount of materials during the period of mastering the technique; in any case, the flowerpot will look like a fashionable designer decoration.

A popular topic among landscape and interior designers has become the idea of creating interesting flower pots with your own hands, since primitive plastic pots It's been a long time since anyone was surprised. Today we’ll look at how to make a flowerpot yourself without special effort and material costs.

Materials for flowerpots

The most commonly used materials for making decorative items are:

wood is natural and beautiful, you need to choose it high quality and resistance to moisture;
ceramic pots for indoor flowers are very diverse and can be painted or glazed;

Stainless steel is characteristic of hi-tech style;

metal products can be made multi-tiered or forged;
plastic flowerpots are practical and lightweight, so they are often used outdoors;

Polystone is very plastic, so you can use it to make flower pots for the wall or floor of any shape, and it is also absolutely harmless.

Pots made of mirror tiles

Often, small mirror tiles are used to decorate walls, but they also make decorative pots look beautiful and stylish.

To create one product you will need 5 tiles and a hot glue gun.
Place one tile on a flat table surface with the mirror part down - this will be the base of the figure.
Apply the remaining 4 tiles perpendicularly to its sides, one by one, fastening the joints with hot glue.
As soon as the glue has completely set, place a light pot with a plant in the resulting box. All is ready.
The ability to reflect surrounding objects makes this interior detail quite interesting to contemplate.

Wooden model made of timber

It is better to make outdoor flower pots from timber, as the material is quite wear-resistant. This option will do for home amateur carpenters who love to tinker with wood.

For a natural product you will need 24 blocks of 15-20 cm each (depending on how tall the flower pots are).
It is necessary to lay the beams like a well, forming a square box with through openings, attaching a couple of boards as the bottom.
It is better to connect pieces of wood to one another using self-tapping screws.
Suspension ropes are tied to the corners of the top row of bars.
Such flower pots are hung from any tree in the garden or on the veranda.

Coconut planter

You can make an exotic flowerpot from the shell of an ordinary coconut. They look especially interesting and harmonious in such products.

In the part of the nut where the three dark “eyes” are located, carefully make holes with a knife or screwdriver. Drain the juice through them.
Using a grinder (metal hacksaw), cut the dense shell crosswise.
When the nut is dry, cut off all the inner flesh with a knife.
Use a drill to make 3 holes near the top edge of the shell for hanging.
Thread wire, ropes, chains or special metal hangers through the holes.

"Clothes for the potty" made of burlap

If you are interested in how to make a flower pot to decorate a fence, pay attention to the seasonal fabric model.

To make a flowerpot in rustic style country, any thick fabric will do.
Cut out two blanks in the form of semicircles or squares like a pocket, and hang it on the fence.
In order to strengthen the pot into it, you should sew a strip of fabric or a wire threaded into the fabric to the upper edge.

Vinyl planter made from an old record

It’s impossible to find intricately curved pots or stands in a store, so by spending just 20 minutes of your time, you’ll get a unique piece. Required materials:

old gramophone record;
pan or jar for molding;
acrylic paint;
Tight work gloves to prevent burns.

A decorative stand for a pot is created according to the following plan.

Place the record on a plate.
Place a jar of the diameter you need later on on top.
Place the entire structure in an oven preheated to 150 degrees for a couple of minutes.
Very soon the plate will begin to soften and melt. As soon as you notice this process, immediately put on gloves and remove the structure from the oven.
Immediately begin shaping the product around the pan or jar.
While the material remains soft, use a screwdriver to make 3 holes in the walls to subsequently install the suspension.
Complete the design of the cooled product by painting acrylic paints outside, and optionally inside.

Flower pots made from branches or sticks

Wooden flowerpots fit most harmoniously into garden interior. Note that large flowerpots are decorated with long branches, so prepare the required amount of material in advance.

sticks or branches;
thick twine;
a piece of burlap;
hot glue;
simple plastic pot.

Weaving pots for indoor plants from wooden sticks is done as follows:

Even twigs or sticks are cut into equal pieces of about 20 cm.
The branches are tied together from below and above to form a single canvas. Tie a knot on the first branch, lay the next branch, and tie the knot again. Continue this way until you have tied all the branches together.
On the right pot Wrap a piece of burlap out of plastic, securing it with a glue gun.
Wrap a wooden cloth around a flower pot and tie the ends of the ropes together.

Wicker macrame plant pot

Hanging macrame flower pots are suitable if there is no more space left on the window sills. Need to:

8 m of natural fiber rope;
pot with a diameter of 10 cm;
4 large and 4 small balls (a rope folded in half should fit freely into their holes);
wooden ring for curtains;
masking tape;
acrylic paint with brush.

Before you weave a flowerpot with your own hands, familiarize yourself with the technology:

Paint the balls and wooden ring. Glue tape onto the pot, forming a pattern, paint on top, and tear off the tape until the paint layer is completely dry.
Cut the rope into 4 equal pieces of 2 m each.
Fold them in half, thread them through the ring, and fasten them so that a loop is formed.
Pass each pair of ropes first through a small and then through a large wooden ball.
Measure 40 cm on each pair of ropes and tie a knot on them. You will end up with 4 knots at the same height.
Separate the pairs of ropes, and tie each of them to the adjacent one. You will end up with some kind of zigzags. The distance between the bottom and top rows of knots should be 6 cm.
Now tie the rightmost rope to the leftmost rope. This will give you a circle.
Repeat the procedure. Divide the ropes again and tie a series of knots, departing 6 cm from the previous one.
Finally, collect all the strings and tie them into a large knot. Step back 6 cm from the previous row of knots, cut the ropes, leaving a small tassel.
Take the pot and insert it into the resulting cocoon.

The resulting wall planter can be hung in a room or used to decorate the façade of a house. For clarity, below is a training video.

Swan made of putty

This is a floor planter under flowers will do for garden decoration. An artificial swan looks expensive and interesting, but the cost of such an idea is cheap. You will need:

5 liter plastic bottle;
small pieces of reinforcing mesh;
metal rod;
gypsum starting putty;
water;
bandage;
Oil paint;
sand.

Manufacturing instructions:

Turn the bottle on its side.
Cut off top part bottles, screw on the cap.
Place on a flat surface and fill with wet sand.
Bend the rod in the form of a two, securing it in the cork.
Mix the plaster according to the instructions on the pack. Place it on a sheet of film work surface. Place a bottle of sand on top of the plaster. Shape the swan's body and the beginning of the neck.
Apply plaster to the walls of the bottle too, leveling it with a wet brush.
Bend the wing mesh slightly and attach it to the putty on the sides.
With wet hands, form the “feather” and neck, wrapping the plaster layer by layer with a bandage.
Make a tail from a piece of twig and putty.
Eliminate all defects, and after 2-3 days clean the product with sandpaper.
Apply a layer of primer for painting, after drying, cover the bird with white enamel, decorate the eyes and beak.

As you can see, making an original and modern flowerpot with your own hands is as easy as shelling pears, and the result will not only decorate your home and yard, but will also inspire you to new ideas. What decor options do you like best? Share your experience in the comments.

Video: Weaving macrame flower pots

Even the brightest ones need a frame - “outfits” that will further emphasize their beauty. Street flower pots are rightfully considered the most spectacular and at the same time simple “outfits”. Making them with your own hands will not be difficult. Do you want hanging planters made from bottles, wicker from wicker, or ground-mounted from a tree stump? No problem! Read the instructions on how to make flowerpots from these and other materials, and also watch educational photos and videos - they will help you transform your garden beyond recognition.

Making flower pots from rags and cement

To make such a flowerpot, you will need:

cement;
old tablecloth;
vase, pot or other vessel for form;
water;
bucket;
“mixer” – attachment for a drill;
dye.

The procedure for creating a flowerpot is very simple. First you need to prepare cement mixture. To accurately determine its volume, take a tablecloth, place it in a bucket and mark on the walls how much space it takes up - according to this mark, pour water for the solution. Add cement to the water and mix them with a “mixer”. The result should be cement laitance, reminiscent of slightly runny sour cream in consistency.

Then, when the mixture is ready, place the tablecloth in it and leave for a couple of minutes until it is completely soaked. After this, remove the material and make sure that there are no dry areas left on it.

Next, take the prepared container for the mold and hang a wet tablecloth on it. Gently straighten the material and leave to dry. When cement mortar completely hardens, remove the product from the container-form and paint. Use special paints for concrete - they are stronger and more durable. Once the paint has dried, you can use the pots for their intended purpose.

Making flower pots from plastic bottles with your own hands

Plastic containers are a universal material for flower pots, since several models of “outfits” can be built from them at once.

The first option is a classic flowerpot. Take a plastic bottle, two CDs, sandpaper, scissors, glue and paint. Cut the bottle into two equal parts using a wavy line. Sand both discs with sandpaper. Take the bottom of the bottle and glue it to the stripped first disc. Then take the top part: first unscrew the cap and glue it to the second disk, and as soon as the glue dries, screw the plastic part of the bottle back to the cap. When finished, coat the pieces with paint.

The second option is a hanging planter. Here you will need: bottle, rope, paints, scissors. First, cut off the neck of the bottle - only a straight line will be used in this work. Bottom part containers. Then cut small holes on the sides for the rope. Then decorate the structure: paint, cut out patterns, draw an animal, trim the top edge - whatever you can do carefully. And then thread a rope through the holes, place a flower pot in the flowerpot and hang the structure on strong nails.

We make wooden flower pots

The easiest way to make a flower pot is from a stump or log. Take:

wood;
drill: drill length – at least 25 cm, diameter – at least 20 cm;
chisel;
protective impregnation for wood.

Select a log or stump of the required diameter. Measure a piece to the height of the flower pot or flowerpot and cut it off - this is again a flowerpot.
Drill a series of holes into the top plane of the wood to destroy the core.
Use a chisel to remove the wood - you should be left with an empty container. The edges need to be aligned.
Treat the inner walls of the pots protective composition and place a flower pot in it.

Advice. The wooden planter itself can also serve as a pot, but to do this, you need to put durable polyethylene in the container and cover it with drainage on top. And only after that you can place the soil mixture with the flower.

More difficult option- flower pots made of boards and timber. You will need:

beams with a section of 25x25 mm;
boards 15 m thick;
self-tapping screws;
wood glue;
drill;
protective impregnation for wood.

The algorithm for making pots is as follows:

Assemble a cube-shaped frame from the beams.
Cut out parts for the bottom and walls from the boards. Sand the panels on all sides.
Drill several holes in the bottom for drainage.
Assemble the design of the flowerpots together: attach the side and bottom panels to the cubic frame using self-tapping screws. In order to give the product even greater reliability, carefully glue all joints.
Cover the surface finished design protective composition.

We weave flower pots from wicker

Another simple one, but interesting option flower “outfit” - a flowerpot made of vines. Prepare for work:

flexible vine - it can be either fresh or dried;
plywood sheet;
moisture-proof impregnation;
drill;
awl;

First, soak the vine in water - this will give it the extra flexibility needed for easy weaving. Cut an oval or round shape for the bottom from a plywood sheet. Along the edge of the resulting bottom, drill identical holes with a diameter slightly smaller than the diameter of the vine. All holes should be at the same distance from the edge of the bottom. Then insert a strong twig into each hole - this will be a blank for the frame of the flowerpot.

The next step is direct weaving: lay the vine between the rods, carefully pressing each new row with an awl. Wrap the twigs until the product reaches the height you require. Laying methods can and even need to be changed after a row - this way you will achieve a different textured surface of the pots.

At the end of the weaving, either cut the rods or weave them into the main rows of the vine. Then let the structure dry a little and get stronger. Final stage– treatment of flowerpots with moisture-proof impregnation and varnishing.

We make plant pots from plaster

To make such a pot, prepare:

gypsum;
wire;
textile strips no more than 10 cm wide;
paint;
bucket;
protective varnish.

The first step is preparing the frame. Turn the bucket upside down and braid its surface with wire. Tuck the edges and hide. Carefully remove the finished frame from the bucket.

The second step is diluting the gypsum solution. Take gypsum and mix it with water until the mixture begins to resemble sour cream.

The third step is the construction of the “body” of the flowerpot. Dip all textile strips into the plaster solution and soak for 3 minutes. Then take out the tapes one by one and place them on the frame layer by layer. The wall thickness should be at least 2 cm. Then carefully treat the walls of the structure with the remaining gypsum mortar. After this, the pot should dry completely - set it aside for 10-12 hours.

The fourth step is design design. Flowerpots can not only be painted, but also decorated with various pieces of glass, beads, pebbles - any small details that you like.

Advice. After drying, the walls of the pots will not be completely smooth, so the paint will not apply well. To avoid this, carefully clean the surface with sandpaper and treat the structure with white water-based composition, and then apply paint of the required color to the flower pots in the second layer.

Now you know that you can make a beautiful flower pot from almost any material without spending a lot of time or a lot of money. The main thing is to turn on your imagination and be smart. So if you want to effectively decorate your garden, don’t rush to buy store-bought pots – take the initiative into your own hands and don’t be afraid to experiment.

How to make a flowerpot: video

Planters for the garden: photo

Flower pots or unusual pot can highlight the unique charm of the plant in it, add zest to a mini-garden on the windowsill, or become an interior decoration both inside the house and in the garden. However, the question of material that should be preferred when choosing a container for flowers often arises. The article will discuss how to choose or make flower pots with your own hands.

Material selection

Depending on your needs and budget, you can choose from a wide range of pots. Before you decide to buy, it's worth comparing different variants, and weigh the pros and cons.

A few points to consider:

finance. There are a lot of options on the market - from inexpensive flowerpots to exclusive handmade ones;
purpose. Will the flower pot be part of a temporary project? In this case, there is no point in spending a lot of money on it. If it will be an element of interior decor, then it is worth investing in the long term;
self-production. Often, to save time, a ready-made flowerpot is purchased, however, nothing compares to your own unique creation;
advantages and disadvantages. Before purchasing, it will be useful to consider the advantages and disadvantages different types pots.

Types of materials for pots

Plastic flower pots

A cheap, universal material from which both small pots and large flower pots are made.

The color of the pot is preferably light; it will not heat up quickly in the sun, and the plants in it will be less susceptible to the spread of microorganisms.
If necessary, you can always make additional drainage holes for the root system in such a pot.
Among the disadvantages of the material, it is worth noting its fragility, especially if it is used outdoors; over time, the material becomes thinner and becomes brittle.

Clay pot

Traditionally popular material for flowerpots.

In terms of design, clay pots offer many attractive options.
However, for plants clay pot is not always best place life, since it is almost impossible to provide adequate drainage.

Pots made of natural stone

Most often used in making outdoor flower pots for flowers, as an element of landscape design.

They are very beautiful, monumental and, of course, durable.
In addition, stone can be called perhaps the most environmentally friendly material.
Its main drawback is its heavy weight.

Wooden flower pot

Wooden pots are very attractive and distinctive.

They provide excellent thermal insulation for the soil. Where necessary, they help insulate plant roots from excessive solar heat.
However, due to the fact that wood is a natural material, pests can grow in it, and wooden bottoms rot over time. To avoid this, it is recommended to combine the tree with other types of flowerpots, for example, put several plastic pots in a wooden pallet.

Metal planter

Metal containers will add a touch of austerity to the design.

They are strong and durable, but have a very high thermal conductivity, so they, like wooden pots, are recommended to be used in tandem with an insulating pot, for example, made of clay.

Nylon threads

They are used to weave flower pots in the macrame style. These are inexpensive, but at the same time exclusive flowerpots that will fit perfectly into the interior not only country house in a rustic style, but also suitable for a modern city apartment.

Six ideas on how to make flower pots with your own hands

In spring and autumn, gardeners traditionally put things in order in their gardens, both regular and mini-gardens on the windowsill: they replant plants and get rid of unnecessary things. Why buy a new expensive flowerpot if you can make it yourself from scrap materials? Surprisingly, such simple things as baskets, shoes, dishes, furniture make amazing, unique flowerpots that will undoubtedly decorate any garden.

Old drawers cabinet or chest of drawers will look very interesting as a flowerpot. To prolong their life, it is better not to pour soil directly into the box, but to place smaller pots with plants in it.

Helpful Tips:

It is better to remove the pots from the box during watering, so its life will be noticeably extended;

To camouflage pots in a box, they are covered with coconut fiber or moss.

Sackcloth. This material, rough at first glance, in capable hands becomes an excellent design tool. The fabric can be dyed and simply wrapped around the pot. Thus, even pots of different shapes and quality will turn into a single ensemble.

Helpful Tips:

in order to securely fix the fabric on the pot and simplify the process of creating a flowerpot, it is recommended to use a glue gun;

Alternatively, you can create a removable cover for the pot, in which case it is sewn together with thread.

Multi-level design made of baskets. This technique will not only help optimize space for plants, but will also make watering easier. In addition, this is an excellent option for pots for hanging flowers.

Helpful Tips:

to extend the life of the baskets, a layer of coconut fiber (peat) is first laid on the bottom, and then soil is poured;

Before planting, it is necessary to calculate the height of the baskets and the height of future plants in them.

Bright plastic sand buckets. Only for children to play in the sandbox? Not at all! It is enough to make drainage holes in the bottom, and bright plastic buckets will lift the mood in your summer cottage.

Helpful Tips:

with the help of such flowerpots you can create kindergarten, planting your baby’s favorite plants in them so that he learns to care for them on his own.

Looks unusually stylish old shoes as a flowerpot. It can be rubber boots or leather boots. The undoubted advantage of this type of pots is the ability to replace them regularly. And old bags can also be used as hanging flower pots.

Wooden box. You can leave the tree untouched, adding brutality to its appearance, or paint it to match the overall landscape.

Helpful Tips:

Using boxes you can create themed corners, for example: medicinal or culinary herbs, spring and summer flowers, etc.

DIY flower pots with self-watering system

A flower pot with a self-watering system consists of the following elements:

the actual pot. Any old plastic one will do, just make sure it has the necessary drainage holes;
a moisture-absorbing area; any plastic bottle is suitable for these purposes;
The tube for filling the tank with water is wide enough to make it convenient and easy to fill the water. You can use a plastic tube or hose;
barrier ( mosquito net, plastic bag, etc.);
stones (for example, large river pebbles);
land (in which the plant will be planted);

Step one: preparation

In a self-watering pot system, the heart is the area that is responsible for transferring moisture to the roots of the plant. Therefore, the manufacture of the pot begins with this element.
To make it, take any plastic bottle, the bottom of which must be cut off and many small holes made in it (through which the soil will be saturated with moisture).
The height of this plastic part depends on the height of the pot, and should be at least a quarter of it.

Step 2: Prepare the tube and drain hole

The tube must be installed in a flowerpot and cut to height. It can be 2-4 cm above the ground surface.
Then the level at which the hole will be made to drain the water is measured. It should be flush with the top of the plastic part that was made to saturate the soil with moisture.
The drainage hole is responsible for preventing excess water from reaching the roots of the plant to prevent them from rotting.

Step 3: Filling with Soil and Installing Absorbent Area

At this stage, you will need a mesh or film, the size is determined by the diameter of the pot, the fabric should be 2-2.5 times larger.
The middle of the cut is marked, which is inserted into a plastic drainage cup.
Then the mesh must be straightened and earth must be poured into the cup. It is important to ensure that it lies evenly along the edges and that the earth is thoroughly compacted.
After which the glass can be placed in the center of the flowerpot.

Step 4: installing the watering tube and filling with stones

A glass with soil was placed in the center of the pot, a tube (or hose for supplying water) was installed on one side and then stones were poured to the height of the plastic cup.

Important: the protective barrier (mesh) must be held at this moment; then it will be carefully laid on top of the layer of stones. Its function to separate is to separate stones from the soil. There is no need to cover the cup itself with material.

Step 5: filling the soil and planting the plant

Filling the soil begins from the middle of the pot, from the place where the plastic glass is placed, which performs the function of saturating with moisture, moving from the center to the edges.
When pouring soil, the mesh can be gradually pressed down. When most of it is covered with soil, the plant itself is planted to the required depth. Then the soil is added to the top of the pot.

Step 6: watering and finishing work

Now that the plant is planted and the soil has been filled, it’s time to water.
Water for the first time after transplantation upper layer soil, and then water is added through a tube into the bottom layer.
The plant will now be able to take the necessary moisture with the help of its roots through a moistened area of soil in a plastic cup.
You can also feed the plant by adding fertilizers to the water, which is poured through a tube.

A flower pot made in this way can be used as a wall-mounted one if it is woven using the macrame technique, or as a floor-mounted one for large-sized plants.

Flowers are always beautiful. And when these beautiful plants are situated in original pots and a flowerpot, it looks just great. Of course, you can go to a specialized store and buy everything you need to decorate your garden there. But it’s much more interesting to make a flowerpot with your own hands. We have plenty great ideas, which will be useful to all those who want to do their own landscaping in the garden.

What can it be made from?

For those who like to come up with original ideas on their own decorative ornaments for interior decoration, of course, it will not be difficult to make something original and useful for the garden.

Pots can be bought at any flower shop. But you must admit, when you do this or that thing yourself, putting your soul into it, you get something special. As a result, it will not only be original, but also dear to you.

You can make an original pendant, where you can then place pots with your favorite flowers, from absolutely any materials. You can safely use everything that is in the barn of your country house. From improvised means you can get quite original things.

You can use large plastic bottles. You can make outdoor hanging flower pots yourself from fabric or any other materials. The main thing is that all this does not require any large expenses or special skills.

We have prepared several for you unusual ideas that will help you decorate your garden in an original way.

By the way, all this can be done with the whole family, including children in the exciting process.

Available materials

Perhaps the simplest option is a cement product using various fabrics and rags. All you need is cement, a cloth (such as a tablecloth or a large, medium towel), large capacity to prepare the mixture, any object for shaping, for example, an old bucket. You can take any bucket: wide, narrow, elongated.

The shape of the future product will depend on this.

So, you need to prepare a cement mixture in a container; it should not be too thick and homogeneous. Then you need to completely immerse the fabric in this mixture. Leave it there for ten minutes. This is necessary so that the fabric is saturated with the cement mixture as best as possible.

Then take out the fabric and hang it on the upside down bucket. The fabric should be carefully straightened, if desired, make folds, an asymmetrical shape, and so on. You need to leave everything in this form until completely dry. Then remove the blank from the bucket and feel free to paint it in any color you like. By the way, use paints that are suitable for concrete. As a result, the concrete product turns out to be of an original shape and quite durable, thanks to which it will delight you for many days.

You can also make an original hanging planter from plastic bottles, in which the plants will look quite impressive and unusual. In order to make it yourself, you will need: rope, sharp scissors and several 5 liter bottles made of plastic. Of course, it is quite possible to take 3-liter ones. It all depends on what flower pots you plan to put in this product.

So, carefully cut off the part of the bottle with the neck, since in your work you will only need the lower, straight part of the bottle. By the way, here you can also adjust the height of the product based on your own preferences. Some people decide to make a high pot, and some decide to make a low one.

It all depends on your taste.

Then you can decorate the product as you please. You can use a special retractable knife to cut out original patterns around the perimeter of the bottle, you can simply draw patterns or entire pictures on its surface, you can cut off the top part in a wave-like manner, and so on. It all depends on your imagination and individual preferences. As a result, all you have to do is thread the rope, strengthen it and safely hang the product in the chosen place.

By the way, plastic bottles It is quite possible to replace, for example, plastic buckets of mayonnaise or delicious ice cream. In this case, the rope will no longer be needed, since they have a strong handle.

A wooden flowerpot will also look original and unusual in your garden. Wood products always harmonize perfectly with plants. In such an item you can safely place a pot with ordinary flowers that resemble vines.

So, for making wooden product you will need 20-22 identical bars. Their length can be 10 or 20 centimeters. Lay the bars in a checkerboard pattern, fastening them together with nails or screws. As a result, you will get an original lattice product. You can leave it this way, or you can paint it in your favorite color.

Completely suitable and ready-made wooden boxes, which usually sell fruits or vegetables. They are different sizes, and all you need to do is carefully treat the surface and paint it in any color. With the help of boxes, you can safely create entire compositions, arranging them on top of each other in an original way.

Also, a wooden planter can be made using a large log. True, to make such a product you will need brute male strength.

If your spouse is busy, then you and your children can easily make a product from plaster. It can be made in any shape: round, square, high and low. Take as a basis the product that you like best in shape. For example, a vase or bucket. Turn over and start making a frame using wire. It's easy to do. It is enough to completely braid the entire surface and then remove the frame from the product.

Next, prepare the gypsum mixture. Gently soak pre-prepared fabric strips in the solution for literally two to three minutes, no more. Next, take out one strip at a time and place them on the prepared frame. This must be done carefully, evenly, layer by layer. As a result, you should have a product thickness of at least two centimeters.

The walls of the resulting gypsum blank must be treated with the remaining mixture to level the product. Leave it until completely dry, about 10 hours, maybe more. Then you can decorate it based on your own imagination. For example, paint with waterproof paints, decorate with original stones, shells, and so on.

There are still a lot of original ideas. It is quite possible to make a flowerpot using an unnecessary wicker basket. Such a product will always look original in the garden.

You can weave a product from a wicker yourself or knit it using strong threads.

Unusual ideas

We offer you a few more ideas that will win your hearts with their unusualness and originality. In fact, the product in which the flower pots will be located can be made of anything. And this does not always require cutting, carving, planing, weaving, and so on. Sometimes you can just take something you don't need old thing and use it. The main thing is to arrange everything beautifully.

An old kettle or saucepan can very well act as a flowerpot. It is enough to rid the product of rust, the old, peeling layer of paint and everything that might interfere. Register unnecessary kitchen utensils possible in any way. Of course, the simplest one is painting. Here you can safely show your imagination, draw any patterns, drawings. Such a product can also serve as an independent pot in which you can plant favorite plant. Typically, such products are bright and cheerful and look quite unusual in the garden.

Many brave summer residents use this to decorate their garden. old item like a suitcase. If you still have an old grandmother's or grandfather's suitcase, then it is quite possible to make a original flowerpot, in which the plants will feel great.

To make caring for flowers easier, place rectangular pots of plants in your suitcase. This way, you can swap them out every time, constantly creating a new original look.

Old tires are often used as available material to embody original design ideas for the garden or vegetable garden. You can simply paint them in bright colors, lay them out on the lawn in an original way, and place containers with plants inside. But you can do something else too.

Sections