Installation of tire fitting machines. Tire fitting equipment

home

Repair

In our online store AvtoRemTech you can buy tire fitting equipment in Moscow at the most low prices, with high reliability, warranty, delivery and long service life. Our range includes equipment for all types of wheels, with manual and automatic control. With its help, the main tasks of changing tires in the spring from winter to summer and in the fall from summer to winter and repairing bending and defects of tires such as punctures are solved. Our Company cooperates with almost all well-known manufacturers in Europe, Italy, Russia, Asia, and the USA - any equipment can be ordered from us without leaving your home! Our company guarantees the availability of products with high reliability, warranty and long service life. The entire range is intended for installation in specialized tire repair centers; we provide quality certificates and warranty cards. The main selection parameters are the presence of manual or automated control, specifications power, pressure and of course reliable manufacturer. Managers will help you decide on the type of equipment, order the product you have chosen, and our transport department will deliver everything exactly on time!

Tire fitting equipment is an eternal dilemma for the pioneers of this business. What equipment to buy, what brands and at what prices - these are the questions that budding entrepreneurs ask themselves. The solution to these problems is in our article!

Nowadays, when traffic jams have become a normal part of our lives, when every second resident of Russia receives a license, it would be a sin not to think about creating your own business.

It becomes clear that with due effort and availability material resources. If you are that person, this article is for you.

One of the first questions that comes to the mind of a novice businessman is purchasing the necessary equipment. The second very important issue is the cost of this equipment.

Prices for tire fitting equipment vary greatly, it all depends on the size of your business. If you are planning to open a small workshop, then you will probably allocate a fairly modest budget for it.

But businessmen almost always start small, so why not give it a try?

Everything for tire fitting: infographics

Equipment: minimum program

We will offer you a minimum set of equipment that will allow you to achieve.

So, here is a list of the most necessary equipment for tire fitting:

Tire changer;
balancing machine;
disc stand (preferably two: for alloy wheels and for metal disks);
piston compressor;
rolling jack (minimum two);
vulcanizer;
oil change unit or oil pump;
side expander;
booster for explosive tire inflation;
wheel bath;
a set of small tools and Supplies.

Nice and useful additions

At your discretion, you can add to the above equipment:

installation for the production of nitrogen mixture (if you offer tire inflation with liquid nitrogen);
"third hand" for the machine (if you choose a budget option without a built-in “third hand” - it is needed to service low-profile tires);
a tread resurfacing machine (if you plan to restore the tread pattern).

Small tools and consumables

With large equipment everything is clear, but consumables usually raise questions. About what tools we're talking about, what “small things” should I buy?

List of tools and consumables:

pneumatic impact wrench;
balancing weights;
pressure gauges;
hoses of different pressures and sizes;
retractable extension spool;
pneumatic connectors;
air preparation unit with lubricator and pressure regulator;
wires and cables;
a set of impact sockets for a wrench;
blow gun;
tire inflation gun;
mounts;
mounting blades;
raw rubber;
wheel repair harnesses;
fungi;
plasters for wheel repair;
rubber valves;
valve insertion tool;
screwdriver for valves;
nipples and caps on them;
extractors for removing and installing nipples;
rollers;
glue for vulcanization;
mounting paste;
tire bead sealant;
scrapers;
wire cutters;
mites;
rolling roller;
knife for removing weights;
awl for harnesses;
cross key;
adapters;
cleaners.

Truck tire service

Equipment for truck tire fitting differs from passenger equipment mainly only in the ability to work with large-sized tires. Accordingly, it will be more powerful and will require more space to accommodate it.

But be careful: open a cargo workshop, without the possibility of repair passenger cars, may turn out to be unprofitable. The main flow of cars is still passenger cars. At the same time, “cargo” equipment is more expensive.

Automatic or semi-automatic?

If you cannot decide which equipment to buy - manual or automatic - then we advise you to immediately buy automatic, especially if you are going to work with a small team at first.

With automatic equipment, tire replacement and repair can be done by one or two workers. Of course, an automatic machine will cost you more than a semi-automatic one, but the price will pay for itself with a large turnover of work.

Types of tire changing machines

Equipment prices, solutions

We come to the money issue. Experts strongly recommend not saving on equipment and, if possible, buying imported machines - for example, German or American.

Chinese equipment is least preferable (AE&T, Nordberg, Trommelberg), because, according to the experience of professionals, it often breaks down, is assembled from unsatisfactory raw materials and is not made to last.

Of course, German and American equipment - for example, Hofmann, HUNTER equipment - may seem too expensive for a beginner in this business, and therefore we suggest taking a closer look at Italian tire fitting equipment (Sicam, M&B, OMA-Werther). It is worse than German, but better than Chinese.

Russian equipment also has good endurance (SOROKIN, STORM, Sivik). Many novice entrepreneurs buy Russian equipment if their wallet does not allow them to acquire Italian or German equipment.

Let's show how much equipment for tire fitting from different manufacturing countries costs, using the example of an automatic 220V machine.

Tire changing machine, automatic (220V):

Germany, Hofmann – RUB 369,985.
USA, HUNTER – RUB 325,044.
Italy, M&B – RUB 170,583.
China, Trommelberg – RUB 104,555.
Russia, SOROKIN – 99,199 rub.

Which tire changer should I buy?

The saying “the miser pays twice” is as old as time because it is true. Chinese equipment will last a year or two, and you will have to buy new ones. It is unknown under what conditions it is made, what kind of people monitor its assembly.

You can trust Chinese manufacturers only if you yourself went to China and went to the factory to check the equipment.

If you don't have enough funds for full set good equipment, buy what you need for now:

Tire changer;
balancing machine;
compressor;
rolling jack;
vulcanizer;
tools and consumables.

You can work with this equipment and earn income from it. Of course, you won’t be able to offer clients the entire list of traditional services, but for a start, the very simple repair tires

As soon as you start making a profit, you will have the opportunity to purchase additional equipment. Right down to the nitrogen production plant, which, by the way, brings a good profit.

Smart cost savings

It is not recommended to buy used tire fitting equipment, because it is unknown what will happen to it in a week. Outwardly, it may look acceptable, but if it breaks, you will be exhausted in dealing with the seller and in the end you will simply waste your nerves.

It is also better not to buy complete sets of equipment for tire fitting. Choosing your own equipment will save you money.

Fixed capital should go to machines; you really can’t skimp on them. All other equipment can be chosen cheaper.

Kits usually offer equipment of the same brand, and the cost varies by different types In this case, there is no equipment.

Watch the video: The right business, step-by-step overview and necessary equipment

Equipment and human factor

You should also remember one very important rule: That appearance, which has new equipment, needs to be supported. It is clear that it will no longer be perfectly clean after the first orders, but you need to try to keep it clean.

For this you need to buy tools such as, for example, a blow gun. The dirtier your equipment, the less trust your client will have in you. Golden Rule not only business, but also life: you are greeted by your clothes.

You can justify a dirty environment by saying that it’s “the season” and you don’t have time to keep it clean, but in reality it’s not that difficult to blow out and wash the tools after each order.

This is a point that not all owners of domestic centers understand. But you, as a smart businessman, will directly benefit from your workshop. By the way, carefully operated equipment will last you longer.

We come to another subtle issue.

Don’t use your brand new, just purchased equipment with people you don’t know.

In our country you can find such magicians who at one time rewatched the program “Crazy Hands”.

They are not used to working with professional equipment.

There are people who simply do not know how to work with tires. There are also those who come for a month, damage the equipment and then leave for another owner.

If you don’t want to lose your business by damaging the equipment, study it yourself and test it yourself, at least for the first time. Hire one or two employees you trust.

The best option would be to hire young and attentive assistants to your instructions, who may not have previously worked at machines. According to the experience of professionals, it is precisely such young personnel who will faithfully serve their work for years.

If you do not control the actions of the workers and are not present in the workshop, then there is no guarantee that you will not have to buy new equipment in a year and start from scratch.

Equipment and place for its placement

The question of quality of work raises the question of where to locate your business. That's exactly how it is, and not the other way around.

There is a prejudice that a stable income can only be generated by a workshop that is located in a popular location, for example, in the city center, where there is a large flow of cars.

Nevertheless, practice shows: people go not to places that are close, but to places where tires are repaired efficiently and quickly. A reputable center, even if it stands on the outskirts of the city, will attract clients based on the “word of mouth” principle.

As a rule, he has his own regular customers. Therefore, if you cannot afford to set up a workshop at an advantageous point, do not be discouraged: your reputation will rise due to the quality of the mercenaries’ work. Which, as we said, must operate the equipment correctly.

If the wheel repair is small, keep an eye on the dimensions of your equipment. You should not buy equipment that is too bulky, because it will not be easy to operate.

People need to have space not only for themselves, but also for small tools, hoses and other materials that need to be on hand. It would be ideal if you set aside a special room for clients and place a small TV, a table and a kettle there.

In modern centers, it is customary to arrange such recreation areas so that buyers of your services do not even notice what is happening around them. After drinking coffee, the client will drive away on brand new wheels, leaving only pleasant impressions about your business.

Tire fitting equipment is necessary for working with the chassis of cars and other wheeled vehicles. Performs the following functions:

Changing tires from winter to summer and back;
Balancing and eliminating wheel imbalance;
Elimination of defects in tires (punctures) and wheels (curvatures).

An additional function is washing the wheels. It’s always convenient, and even mandatory when balancing.

Equipment

The set of equipment for tire fitting includes:

balancing stand. It reveals wheel imbalance (static, dynamic). The imbalance is eliminated by gluing weights to the disc in certain places. Power supply - from the mains;
tire changing machine. On it, the wheel is disassembled - the tire and tire are removed from the disk, and then they are installed back. A number of models are still inflating the tire. Power supply - from an electric or pneumatic network;
car lift or jack. It is not directly involved in tire fitting work, but without it it is impossible to remove the wheel from the car;
compressor. Its function is to make tire changing machines, as well as other pneumatic equipment, work.

An additional tire mounting kit makes the job easier. In addition, it allows you to repair individual wheel assemblies. It includes:

wheel washing unit. When eliminating imbalance, a washing operation is mandatory. Because dirt affects balance;
bath for checking tire tightness. When the tire is pressurized, bubbles appearing in the water indicate the location of the puncture. The device is primitive. But if it is missing, it cannot be said that the car service has everything for tire fitting;
vulcanizer. Seals a puncture by welding a patch of raw rubber onto the hole;
bead expander. Allows you to remove a tire stuck to the rim. Often necessary in the case of tubeless models;
stand for straightening discs. Form defects are corrected on it by grinding off excess bulges;
nitrogen generator. Produces nitrogen - for the pneumatic system or tire inflation;
tire inflation unit. In this case, it is not necessary to dismantle the wheel;
impact wrench Makes it easier to loosen or tighten nuts. And it speeds up.

Tire fitting equipment kits and prices

The most budget and cheap option starts from 21,000 rub. A standard car service kit will cost from 74,000 rubles per kit.

Have you decided to buy tire fitting equipment? Contact Weisberg and we can offer you the full range

Enters trading companies a large number of requests for equipment, one of the most common is a request for equipment for organizing a tire service station. Moreover, the organization of a tire service station can be within the framework of an existing car service center or the organization of a new line of business individual entrepreneur or organizations. This article will discuss each type of equipment that is necessary for the operation of a tire shop.

Tire stand

The machine for mounting and dismantling wheels is one of the most important components of a wheel repair site. Their main differences are that they differ in type - automatic or semi-automatic, of course the difference is in manufacturer and price. It doesn't always happen that very famous manufacturer provides sufficient product quality and a set of necessary functions. It often happens that without overpaying for the cost of equipment, the client can get a very large number of necessary functions of the machine - this applies to machines for passenger wheels and for truck tire fitting. Low-cost manufacturers for Russian car services and tire repair specialists are Chinese manufacturers (UNITE, Bright, Trommelberg, etc.) and Russian manufacturers (Avtotekhsnab, NovGARO, Civic, Avtospetsoborudovanie plant, etc.), more privileged are the products of German and Italian manufacturers: Sice, CEMB, Sicam, Hoffman, M&B, Ravagliolli, Nussbaum, Beisbarth. Each manufacturer is good in its own way, both in terms of functionality and build quality, and in many regions of Russia there is a so-called regional factor, in which the “Gypsy Post” has a very serious impact on the decision to purchase a particular brand for your tire shop: if my neighbors have such and such a brand, then you need to install exactly the same one, because everything else is not tested and may break. For some reason, it is very difficult for our Russian tire repair specialist to trust the seller and the organization that will service this equipment, he sleeps and sees that they want to deceive him and “sell” absolutely non-working equipment with low quality, but this is our mentality, with which we simply need to live and work, and only with the help of professional advice from managers and competent service prove to the client the performance and quality of a particular tire changing machine.

Balancing machine

Another stand, the presence of which is simply necessary at a tire shop, because... the importance of precise balancing is certainly relevant and there is no need to prove this importance. The accuracy of wheel balancing is, first of all, the safety of our road movement.

There are no special differences between balancing, there is manual entry of all data and automatic entry of all wheel data into the machine memory for making the necessary settings. Some balancing stands have vibration control functions, for example, the American manufacturer HUNTER was the first to make this function, and now HUNTER with vibration control functions are in demand among Russian car services - for example, the GSP9700 model. For trucks, especially modern imported trucks, wheel balancing has become a vital necessity. Legend and most popular model Russian production is the balancing stand SBMP-200, which is characterized by its low cost, high quality, time-tested and already established reputation among tire fitters. Among the imported analogues, Italians and Germans can be distinguished. For cargo balancing, a very convenient function is an elevator or lift, which is located nearby or built into the stand itself.

The accuracy of balancing is also affected by the use of professional adapters and adapters - in Russia and throughout the world, the German manufacturer HAWEKA is probably the recognized leader in this segment. Nowadays it is considered bad form NOT to use these devices. The use of which firstly gives quality work tire workshop, secondly, it saves the owner and technician from dissatisfied customers, and thirdly, it shows the professionalism of the tire service. HAWEKA adapters can be purchased separately for a specific type car wheels, and entire tool boards with a conveniently selected set of adapters.

Vulcanizer

Wheel vulcanization has long been considered a mandatory function of any tire repair. Both the tubes and the tires themselves are subject to vulcanization, because... modern vulcanization equipment allows this to be done in compliance with all quality or restoration requirements rubber coating. The device that performs the vulcanization function is called a vulcanizer. The most popular in Russia are the Chelyabinsk manufacturer Thermopress. The main difference from other manufacturers is that Thermopress no longer produces any other products, and all its developments are focused only on this product. Although there are still vulcanizers ETNA and SIBEK - which are also known to Russian users of tire repair products. They differ from each other: they can be with or without a timer, for tubes and tires, for cars and trucks, for special equipment.

Compressor

Life without air is not possible! The use of a well-designed and mounted pneumatic system allows the operation of a lot of equipment in a tire workshop - this, by the way, some models of which now only operate on air, and which differs in the force applied to the wheel nut, the recommended force is from 500 to 600 Nm - it is for passenger cars; and various stripping machines used for gluing tubes or tires when installing patches.

Most often for normal operation For tire fitting, a receiver with a volume of at least 100 liters and a capacity of at least 400 liters is enough. Probably the most famous and popular manufacturer on the market compressor equipment is REMEZA. Belarusian ones are distinguished by their high reliability, unpretentiousness in operation, and low price - which cannot but captivate Russian users.

Wheel wash

This type of equipment, unfortunately, has not yet become popular among tire fitters in Russia; this is probably due to the fairly high cost of the equipment. The minimum price for an imported car wash starts from 200,000 rubles; the most famous are WULKAN wheel washes from the Polish manufacturer KART. Although the presence of a wheel wash at any tire shop or car service center is, first of all, a production culture, it is the accuracy of the results when balancing wheels, this is an additional service to customers who have now become very demanding about the equipment and capabilities of the service where their car is serviced. And probably every car owner will be pleased when his old wheels are washed and packed in special bags and neatly placed in the trunk. And since we still strive for perfection and try to make all areas of the car service center modern, then buying a wheel wash is only a matter of time.

Auxiliary equipment

First of all, auxiliary equipment for tire fitting includes those already mentioned earlier, they can be pneumatic and electric. The most popular are pneumatic impact wrenches; when connected to a pneumatic line, they allow you to effectively and, most importantly, quickly unscrew or tighten wheel nuts. Electric impact wrenches are not used in passenger tire service.

There are generally three types of impact wrenches used in truck tire service:

Manual. First of all, it has found popularity among drivers who are on the road, and for whom it can really help if the car is parked on the highway with a flat tire.
Pneumatic. It is used in tire shops of any size; it can be manual or roll-on.
Electric. Electric impact wrenches are used only in truck tire fitting.

Tire service bath– is a convenient way to check a wheel or tube for a puncture.

– the main purpose of which is to quickly raise and hold the car at the desired height while a tire repair specialist performs the removal and installation of wheels. They vary by tonnage, manufacturer, and price. But at tire shops you can also find bottle jacks, which are mostly suitable for private tire repair, as well as pneumatic ones, which are connected to the air line and are very convenient to work with.

Installations for inflating tires with nitrogen- still occupying space auxiliary equipment, but have already found their main place in many services. They are very profitable for their owners: the cost of gas is low, but the cost of the service is quite expensive and the markup is 2 or 3 times the purchase price. And the payback on such installations is quite fast. Inflating tires with nitrogen is easy required service for owners of expensive foreign cars with good tires, where the functions provided by nitrogen play a big role in driving safety.

AdaptersHAWEKA – necessary tools, adapters and cones for high-precision wheel balancing. Essential for the safety of any vehicle!

Disc straightening machine

Wheel rolling is a fairly popular service among those offered by tire shops. Our roads, in many regions of Russia, leave much to be desired - holes, potholes, stones, road repairs - all this leads to disruption of the evenness of the disc diameter. Main types of stands for disk repair:

To repair stamped discs, so-called roller stands are used; they come in 6- and 8-roller types. The essence of their work is to apply a uniform force on the wheel rim to adjust the surface of the disk and level it to the ideal diameter.
To repair cast wheels, specialized machines for straightening cast wheels are used. They look like real machines with a turning group. When working with steel disks, the method of heating the area of the steel disk is used, in which, when heated and with the help of special attachments and rotation of the turning group, the area of the disk rim is slowly adjusted and the ideal diameter of the disk is determined.

In Russia, the most popular models are: roller stand for straightening wheels “Titan ST-16” from the Omsk manufacturer “CIVIC”; for cast wheels, Turkish machines ATEK, DORUK and the Russian manufacturer SIBEK.

Sections