Installing mosquito nets: step-by-step instructions. How to install a mosquito net on a window - step-by-step instructions Hang mosquito nets

The design of a mosquito net usually includes:

• frame profile;
• mullion profile;
• special connecting corners;
• fastening cord;
• corner profile;
• 4 plastic or metal holders (z-mounts).

After attaching the mosquito net to balcony door, window in the room or on the balcony, you can completely forget about annoying insects. This will help you avoid using fumigators and other health hazards. chemicals for insect control. In addition, the device protects against dirt, dust, and the penetration of allergens into the house - plant particles, poplar fluff. It also ensures the safety of pets when the window is open.

Among the main advantages of this design:

1. Ease of use. How to remove mosquito net from the window? - you won’t have such a question, since the nets are easy to install and just as easy to remove if necessary - for washing, for example.
2. You can wash the mesh with regular soap and a sponge.
3. Aesthetics and attractive appearance - the installed mesh will not spoil even the elaborate design of the room.
4. The mesh has tiny holes that can protect not only from insects, but also from raindrops. At the same time, the material does not block the view from the window in any way or impede access fresh air.
5. The design is durable because it includes metal (aluminum) frame elements and fiberglass.
6. The material is incredibly resistant to stretching, tearing, bending tension, and in addition, does not fade in the sun.
7. Due to its small thickness, the mesh is compact, which means it can be stored anywhere.

Types of mosquito nets

When deciding how to install a mosquito net on plastic windows, it is worth determining what type of structure you will use. The main varieties here are:

1. Framework It is considered the simplest and most affordable in terms of cost. It can be removable and extendable. This type is ideal when there is no need to constantly open the mesh. If the mesh is made large, then an additional reinforcing bar is installed in the middle.

   

2. One of the varieties of frame mesh is considered to be plunger mesh - it is not attached to special corners, but is mounted directly into the window opening.

   

3. Velcro design or tape is also elementary. It is mounted on inside window sash and can be easily removed if necessary.

   

4. The mosquito net can be attached to the balcony door type standard door . It is hinged and opens inward or outward - just like a regular door. In the closed position, the mesh is held by special magnets, and a handle is provided for convenient opening.

   

5. Roll considered one of the newest inventions. It includes a guide profile, a mesh roll and a special crossbar with handles. The principle of using the product is reminiscent of roller shutters - when open, the mesh is hidden in a box above the door. This perfect solution for large window openings and glazed balconies.
6. Pleated similar to a roll structure, but moves horizontally, gathering into an accordion. This mesh can decorate the interior with its original appearance. Designers often decorate pleated designs with drawings and other decorative elements, experimenting with colors.

More information about various types You will find mosquito nets for windows in our article. You will also learn about proper care for such designs.

We talked about the features of nets for balcony doors on how to make a net for a door with your own hands.

And about that, read here. In the warm season, this thing can be very useful, especially if your windows are on the sunny side.

Features of fastening mosquito nets

Attaching a mosquito net to plastic windows or doors can be done in 4 basic types fasteners:

1. The plunger mount is considered the most expensive, but also the most reliable and resistant to wind. The plunger is a special metal part with length adjustment. It uses springs. The mesh with this fastening is easy to remove and put on. By the way, the plunger is suitable for windows of any type.
2. The most unreliable fastening is considered to be a “flag” fastening - fastening using small plastic hooks. However, it may break due to a strong gust of wind.
3. Metal corners (z-shaped fasteners) also make the fastening reliable. However, such corners must be tightly fitted to the frame, and also additionally secured to it from inside the room.
4. Popular types of fastening are also plastic corners. They are located on the outside without changing the design of the windows. The mesh can be easily removed if necessary. In addition, this design will not interfere with the normal closing of the window.

How to install a mesh on a balcony door

Work on installing a mosquito net on a balcony door should begin with the correct measurements - when open door from the outside and always close. After this, the method of fastening the structure is determined - it depends on the design features of the door and the location of the mesh.

Then the tools and components necessary for the work are prepared - these are self-tapping screws, a screwdriver, hinges and a clamping mechanism, magnets. Before installing the mosquito net, the attachment points for the hinges are marked, after which the hinges are fixed to the door profile with self-tapping screws. After the loops are inserted into the mosquito net, a clamping mechanism is installed. At the final stage, clamping magnets are installed, which are also secured with self-tapping screws.

Installing a mosquito net on a window

Installing a mosquito net with your own hands on plastic windows begins with assembling the structure.

Tip: Before you start installing and assembling the mesh with your own hands, you need to take the correct measurements.

As a rule, the size of the anti-mosquito structure practically corresponds to the dimensions of the window sash. This needs to be checked - the window sash is opened and measured along the light opening, after which 20-30 mm is added to the height and width.

The plastic frame profile is cut in strict accordance with the window opening. An additional crossbar can also be mounted here - it is designed to increase the rigidity of the structure, which is necessary with a large height-to-width ratio.

At the top and bottom, the frame profile is reinforced with an impost, usually made of aluminum. This guarantees the strength of the entire product.

After the profile is ready for assembly, it is connected with corners. These corners are made from special durable PVC(1-2 mm thicker than the profile) - therefore, the structure becomes resistant to deformation.

The mesh is pulled over a fastening cord, and then this cord is mounted from the inside into the frame profile, as a result of which the fabric is reliably stretched and completely secured.

After that they are mounted on the frame metal elements corner profile, which are needed to secure the structure in the window.

Lastly, 2 handle holders are attached to the mosquito net, thereby ensuring ease of installation. Then the fully assembled mosquito net is installed on the window.

If you are going to install an anti-mosquito net on a window, and you already have it in assembled form, then keep in mind that the width finished product should exceed the dimensions of the window opening by 2 cm, and the height - 3 cm. The mesh is also supplied with special fasteners in the amount of 4 pcs. (Two pairs). Each pair has an upper and a lower element, with the upper one being wider than the lower one.

These fasteners are placed on the frame and screwed - the main thing is not to confuse the sequence. So, the lower elements are attached first - so that the edge installed mesh shifted 1.5 cm below the window opening. And in order to determine the place of fastening of the upper element, add 1 cm to the height of the mesh and measure this distance from the fastenings below. The mesh is simply inserted into the grooves, being attracted to the frame and falling down.

As a result of simple manipulations, you will receive an effective barrier to insects and reliably protect your home from blood-sucking flies, wasps and moths. In addition, the mesh cells allow you to capture even small particles of dust and large debris - which means even the air in your room will become cleaner.

Installing a mosquito net on a plastic window video

And here you can watch a video that demonstrates the installation of a mosquito net on a PVC window using plastic fasteners.

When the warm season approaches, you immediately feel the desire to open the apartment windows wide in order to ensure an influx of fresh air throughout the day. However, the supply of life-giving coolness is overshadowed by annoying insects, which, under the cover of darkness, go out on the “warpath”. Moreover, as luck would have it, they choose the person as the victim.

In order not to become an object of attack, it is necessary and then install it on the window. However, what should those people do who have never seen how it is installed? Calling a specialist over such a trifle and paying him money is somehow rude. There is only one entrance - read this article to the end in order to remember once and for all how to install a mosquito net on plastic window.

Functional purpose.

The design of a typical mosquito net includes aluminum profile covered with plastic white with a fine-mesh gray mesh, which itself is quite fragile, because it is also made of aluminum.

The mosquito net is designed to perform several functions at once, it:

1. Protects the premises from various insects trying to enter it from the street;
2. It gets in the way of small particles of plant origin, which can serve as a source of allergies. It also protects the room from street dust and dirt.
3. Serves as a protective barrier for pets, preventing them from falling out.

It's not difficult. It is enough to wipe them with a damp cloth once a year. Dismantling is also effortless.

Removing the mesh must be carried out at least twice a year - once for wiping, another when cold weather sets in. Please note that the aluminum sheet with which the mosquito net is equipped is not designed for use at low temperatures - it may simply come apart.

The installation of the mesh itself does not require any special skills or tools. Even the hostess can handle it without anyone’s help.

If such a mosquito net is supplied along with new PVC windows, then when installing window construction specialists, ask them to show how the mosquito net is installed. Its removal will occur in the reverse order.

If there are already plastic windows in the apartment, then when purchasing a mesh, you need to check its completeness - it must include fastening elements, which are two pairs of fastenings - upper and lower. Install them correctly - with the wide bar facing up.

Installation process.

• The lower fastener is installed so that the position of the mosquito net relative to the window opening is 1.5 cm below it.
• The upper components of the fastener are fixed on the window frame at a distance that includes the height of the mesh plus 1 cm.
• Installation of the mesh frame is carried out in the following sequence: the product is completely taken out into the street, its upper part is inserted into the upper groove of the fastening element, and the lower part, respectively, into the lower one.

To properly install a mosquito net yourself, you should use one of the fastening methods. Consider each of them in more detail.

Internal fastenings.

The product is taken by the side handles, hooked from above by the window sill and the mesh rises up to the end. Then the lower hooks are inserted into the frame overhang from the bottom, and the product is placed on the fasteners from below. After that installed structure aligned in the window opening.

External fastenings.

This method is the most dangerous, however, it is also the most proven. It involves leaning outside the window to secure the corners with screws. If desired this work You can entrust the company's specialists to install window structures.

The installation of the mosquito net occurs in the following sequence:

• At a distance of 5 centimeters from each edge, the upper fastening elements are screwed with screws, the size of which should be limited to 2 cm due to the likelihood of them getting caught when tightened into the window frame.
• Having finished working with the upper ones, you need to continue installing the mosquito net with your own hands, using the lower fastenings.

Their fixation can be done in two ways:

1. This method optimal for accessing the window profile from the outside and is based on markings. Assumes the presence of two workers. One holds the product, the other marks the distance at which the fixing elements will be attached.
2. Second way. After securing the upper holders, measure the length of the mosquito net and add 2.7 cm to the resulting value. Measure the required length from the end of the upper fastener. Mark with a pencil. Screw the lower fastening element along the intended line.

Hide

Summer brings not only positive emotions and relaxation, because we shouldn’t forget about annoying flies and dangerous mosquitoes that try to fly into an open window. A mosquito net is inexpensive, but if you consider that there are several windows in the house, then the end result is quite a decent amount, which, if desired, can be saved. A DIY mosquito net can be made quickly and inexpensively.

What is better - a purchased mesh or a homemade one?

Buying a window mesh will cost you about 1,500-2,000 rubles, so to save money, you can make it yourself. Many people wonder how to make a mosquito net for a window? This is not difficult, especially since everything you need can be bought at a hardware store. If you are interested in the question of what mosquito nets are made of, then the answer is simple - the material is durable fiberglass with the addition of weather-resistant PVC. The higher the quality of the material, the higher the protection against insects.

Before making a mosquito net with your own hands, take careful measurements and do not forget about allowances. If you are going to attach the mesh using Velcro or glue, choose something that can be easily removed and will not damage the window.

Several simple ways to make a mosquito net with your own hands

There are two types of mosquito nets that you can make yourself:

1. Secured with fastening tape - simple and cheap way make your own mosquito net.
2. Frame.
3. Rolled.

One of the most simple ways Making a mosquito net with your own hands is done using special material and adhesive tape.

Take high-quality Velcro; the quality of fastening the protective mesh to the window opening will depend on this. You will also need special material with small cells. The smaller the cells, the better. Such material can be purchased at fabric stores, or you can use old products, for example, unnecessary tulle. It is best to purchase a special mosquito net - it reliably protects against insects and withstands weather conditions.

Mosquito net secured with adhesive tape

After all the measurements have been taken, take the material and cut it out, do not forget to leave small allowances. Divide the Velcro into two equal parts. Apply glue to one part and carefully glue it to the window opening. After the glue has dried, attach the mosquito net to the adhesive tape. Similar nets can be made for a car. It is done quickly and easily, with minimal costs. Instead of adhesive tape, you can use special magnets; this will significantly reduce the installation time of the mesh and simplify the process.

Frame window screens

A more expensive and complex method of making a mosquito net is the method with fastening to a frame. To do this you will need metal corners, plastic cable and blind rivets.

The first thing you need to do is measure the window from the outside, because this is where the mosquito net will be attached. Cut the cable to the required length, maintaining an angle of 45 degrees. Sand the sections and connect them using metal corners. Now make holes in the corners in which the rivets will be located. They should be on the outside, not inside the cord. Now all that remains is to attach the mosquito net itself to the frame. Do not pull the mosquito net too tightly, as this can deform or tear the fabric.

Frame window screens

You can make sliding mosquito nets with your own hands; they will fit well and protect the balcony opening or front door. A mosquito net on the balcony will help you prevent penetration dangerous insects indoors, will reliably protect even from street dust. The manufacturing technology is the same, the only difference is that the material is cut in the middle and the edges are processed. For convenience, you can attach magnets or rivets to the edges of the mesh, thus providing additional protection.

Rolled mosquito net

Rolled window mesh operates on the principle of roller shutters. It will reliably protect against insects, and it is convenient and easy to use. If you are interested in how to assemble a rolled mosquito net with your own hands, then there is nothing complicated here. You just need to be patient and have the appropriate materials.

You can make a mosquito net for a window of any size with your own hands. To make a rolled protective mesh, you only need a special box with a shaft and material. To attach the mesh to the window, use special magnetic latches. You can use screw fastening overlapping or at the end of the guide in the opening to the slope. It is more convenient to use a rolled mesh than a regular one, and it is much easier to care for.

Rolled mosquito net

A rolled-up mosquito net for a window is an excellent protection against annoying insects. Allergy sufferers will especially appreciate this design - after all, it will protect the room not only from mosquitoes, but also from plant pollen and poplar fluff. It is best to choose a fine-grained material for such a mesh, this will increase the level of protection.

Making a mosquito net with your own hands is not difficult. If you need a mosquito net for a balcony or window, you can make it yourself quickly and without extra costs. Give this process a few hours and enjoy a quiet life without annoying insects! A homemade mosquito net is quite inexpensive. After summer, you can remove it from the window and carefully pack it, and hang it on the window again next year.

Homemade and the most cheap option making a mosquito net without using a frame. This option involves attaching the mesh directly to plastic profile window.

Mosquito nets should be installed in calm weather.

To install (install fasteners) a mosquito net you will need: a tape measure, a pencil, a screwdriver or screwdriver, a set of fasteners and screws.

For your safety, it is advisable to have an assistant hold the mosquito net when you measure and screw the fasteners and use the open adjacent flap, if there is one.

Mosquito net fastenings are screwed with self-tapping screws onto the street side of the window, 2 pcs. on top and 2 pcs. below.

Recommendations: annually, before installing mosquito nets, visually inspect the fastenings (corners) for yellowing. You should also try to swing each of the brackets by hand. If you hear a characteristic cracking sound or feel significant deformation, the fasteners should be replaced. Otherwise, the mosquito net may simply fly away.

Important!!! if the window is installed metal grill, then installation of a mosquito net is possible only with the disassembly of the mosquito net and subsequent assembly at the installation site (outside the window).

There are several ways to install mosquito net fasteners (depending on the free width of the protruding profile on the street side of the frame).

Standard method.

Open the window sash where the mosquito net will be installed. On the outside of the window, install the mosquito net fastenings using self-tapping screws, as shown in the figure.

Important!!! The length of self-tapping screws or self-tapping screws should be less than 30 mm, since longer ones can rest against the reinforcement running inside the PVC window.

The top and bottom mounts are different. Longer fasteners are placed upward.

To the bottom of the window profile from the outside we apply 2 lower fasteners for the mosquito net profile (they are smaller in size than the upper ones) and either mark with a pencil the points for drilling for the fasteners and drill, or immediately tighten the screws with a drill, take the self-tapping size 3.9x16 or 3.9x19 mm.

To make the work easier, the fasteners can be glued to the profile with double-sided tape, just don’t forget about the screws!

Holding the mosquito net by the frame, apply it to outside windows, place them on the lower mounts and check the dimensions. We install the upper brackets at the top of the window profile; it is most convenient to attach them first with double-sided tape, then with hands free tighten the screws.

The location of their installation in height can be determined either by marking with a pencil the top of the mesh installed on the lower fastenings, or by calculating - the size from the supporting part of the lower bracket to the supporting part of the upper bracket should be 8 mm greater than the height of the mosquito net.

Having installed all the fastenings, take the mosquito net by the frame and stick it out the window, first insert it into the upper fastenings until it stops. When correct installed mounts the bottom of the mesh should pass almost flush over the lower fastenings. Then we lower the mesh down onto the lower fastenings and check how firmly it holds on the fastenings. If there is the slightest doubt, it is better to lower the top fastenings for a tighter fit of the mosquito net.

Take the mosquito net first by the frame in the middle on both sides and stick it out through the light opening of the window.

Not by the handles, as some would-be experts advise (the handles are rolled up with a rubber cord and with an awkward movement they will break out and simply remain in your hands), but by the frame.
Place the mosquito net (holding the frame on both sides) by the fasteners from above until it stops (picture below: position<1>), then grab one handle with one hand, then grab the other handle with the other hand, press bottom part mosquito net to the frame and place it in the lower mounts (position<2>).Be sure to check that the mosquito net is wrapped behind the lower fasteners and not standing on them. See the picture below. To remove the mosquito net, you need to repeat all the steps in reverse order. take hold by the handles, lift up as far as it will go. Then grab the frame with one and then the other hand, move the bottom of the net a little from the frame and lower it down (until the upper fasteners come out of engagement) and bring the mosquito net into the room.

If there is a sash nearby, then it will be more convenient to grab the bottom of the mesh frame through the adjacent sash and, lifting it up as far as it will go, move the bottom of the mesh away from the frame and, holding the frame with both hands, bring the mosquito net into the room.

Non-standard installation of mosquito net No. 1.

Unlike the standard installation of a mosquito net, the non-standard one differs only in the installation of the upper fasteners on the sides of the net (used when the top of the free frame profile is less than 5 cm):

The process of installing and removing the mosquito net is the same as with the standard installation method.

Non-standard installation of mosquito net No. 2.

It is used when there is 3-4 cm on top of the free profile. First, the upper fasteners are screwed (as with a standard installation) as high as possible. Then the mosquito net is placed against them all the way and we mark the bottom of the net with a pencil. We fasten the fasteners to 5 mm. below the mark.

The mosquito net will be inserted on the side. We take it by the frame, insert it first into the upper mount, then into the lower one. It is advisable to push the mosquito net in without distortion (try to keep it strictly vertical).

Non-standard installation of mosquito net No. 3.

PIt is used when there is less than 3 cm at the top and there are two opening doors nearby.

First, the upper fastening is screwed to the side on the vertical part of the frame profile (farthest from the adjacent sash). You can retreat 10-15 cm from the upper corner (it would be better to press the middle of the mosquito net).

Plastic double-glazed windows are found in almost every home today. Many owners have to deal with the need self-installation mosquito net - a protective device that prevents flying insects from entering the living space. Flies, bees, mosquitoes and wasps can deprive anyone of sleep, so protective mesh fabric - necessary measure with the onset of warm days. How to choose and install a mosquito net on a window?

A little about the design of mosquito nets

The traditional elements of a mosquito net are the following:

• frame profile and a reinforcing impost (plastic jumper with metal reinforcement inside);
• connection corners;
• fastening cord;
• corner profile;
• plastic or metal fasteners.

The mosquito net requires minimal maintenance.

1. It is easy to attach and remove.
2. All dirt can be washed off with a soap solution and a stream of water from the shower.
3. The mesh is lightweight, resistant to UV radiation and temperature changes.

Modern mesh fabrics are produced by the most different forms, but they have one function - protecting rooms from dust and insects.

Popular types of insert mesh for plastic windows

The choice of mesh sheets for protecting windows and doors from annoying mosquitoes is quite large. Of all the variety, the most popular models can be noted:

• frame design. It is the most affordable and simple, can be sliding or removable. If area window opening large, install a mosquito net with an additional reinforcing bar in the middle;
• mesh mounted on plungers directly into the window opening. Its advantage is higher resistance to factors external environment. For example, strong gusts of wind;
• Velcro mesh. A popular model among those buyers who do not require constant protection from flying insects. Such protection can be removed at any time without outside help;
• mosquito net mounted on hinges similar to the door opening. Closed position the design is provided with special magnets;
• roll type mesh. According to the principle of operation, it resembles roller curtains. The canvas is unwound and collected back into a box installed above the window opening;
• pleated mosquito net. This is also a roll type of construction, but it is assembled in a horizontal plane (by analogy with an accordion). The advantages of such meshes are a wide range of colors, the ability to decorate the canvas with decorative elements and patterns.

Varieties of mesh fabric - gallery

Velcro mosquito net - an excellent option for use in the countryside Hinged mosquito net used for plastic windows and doors Rolled mosquito net folds up, looks aesthetically pleasing and saves space Pleated mesh can be made in different colors

Mosquito protection fasteners

Installing a mosquito net on a plastic window involves using one of 4 possible types fastenings:

1. A plunger is a metal pin with a spring that can be adjusted in length. The most expensive and most reliable type of fastener.
2. "Flag". This type of fastening is considered the most short-lived. It's small plastic hook, easily blown away by gusts of wind.
3. Z-shaped metal corner. Attached to the frame from the inside, used for indoor installation mosquito net.
4. Corners made of plastic. Their main advantage is that the window opens and closes freely during the operation of the mosquito protection.

How to install insect protection on frame fasteners

If the mosquito net is already equipped with Z-shaped fasteners, the algorithm for installing it is as follows:

1. Align the mesh, positioning it so that the fastening is on the inside. Fasteners with a large hook are placed up, and fasteners with a small one are placed down.
2. Insert mosquito protection into the window opening.
3. Raise the net as high as possible.
4. Place a large hook on the top edge window frame.
5. Fasten the net tightly, lowering the lower hooks.

Fastening with plastic corners

The peculiarity of this method is the installation of the structure on the fasteners of the window opening. Procedure:

1. Produce necessary measurements window opening.
2. Make preliminary markings on the outside of the window frame for future fastening of the corners. The plastic corners are fixed from below 1.5 cm below the window opening.
3. Measure a distance equal to the height of the mosquito net + 1 cm. This is the location of the upper corner.
4. Secure the corners with self-tapping screws.
5. Install the structure according to the scheme: lifting it all the way up, inserting the corners into the grooves, attracting the mesh to the opening, lowering it down.

Mesh size for outdoor installation different from the plug-in design. The height should be 1 cm, the width should be 2 cm more sizes window opening.

How to attach a mesh to plastic corners made by yourself - video

Plunger option for installing mosquito structures

The peculiarity of plunger installation is that the mesh is installed in the window opening itself, and not inside or outside. To fix the plunger, a hole is drilled into which the pins are inserted.

Installation process for plunger screens:

1. As many holes are drilled on the window opening as there are plungers installed on the mosquito net profile.
2. The counters are fixed in the holes.
3. The plunger is inserted. To do this, you need to press its head towards the mosquito net.
4. When the pins are fixed on one side, the second side of the mesh is fixed in a similar way.
5. Finally, a seal is glued to the frame of the mosquito net, increasing the degree of protection against small insects.

Is it possible to install a ready-made mosquito net on a wooden window?

Installation of the finished mesh on wooden window possible if the dimensions of the structure and the opening match. In this case, the procedure is similar to that used for plastic windows.

If you choose a ready-made mosquito net for a window country house difficult, and ordering production according to individual project expensive, you can assemble mosquito protection yourself.

How to make a protective insect net yourself - video

When purchasing a mosquito net, you must carefully study the mechanism of its installation. For example, plunger structures must have the size of a window opening and are not always suitable for consumers with non-standard plastic windows. The owner must think through in advance all the issues regarding the upcoming installation of mosquito protection and choose the most suitable option.