Homemade machine for cutting plastic bottles. Machine for cutting plastic bottles - how to make

Plastic tape made of plastic bottles used in homestead farming. Thanks to it, you can strengthen a wooden fence or tie it up berry bushes. This rope can withstand up to 50 kg. It depends on its thickness and length. It is mainly used as a fixative.

There are two cutting methods plastic bottles: manual and machine. You can make transparent tape yourself at home. To do this you will need sharp scissors and proper markings.

Agree that the production of such material manually quite a labor-intensive process. Makes cutting transparent tape easier special device.

What can a bottle cutting device be made from? What materials will be needed to build such a structure? The answers to these questions are presented in our article. Advice from experienced craftsmen will help you cope with the task.

Advantages of plastic tape

There are several positive qualities transparent tape in household. These include:

• does not deteriorate when exposed to sunlight;
• long service life;
• resists low temperatures;
• can withstand up to 80 kg;
• low cost of material;
• no odor;
• decorativeness.

How to make equipment for cutting plastic tape?

The device for cutting plastic bottles consists of simple details and elements. For this you will need:

• wooden base. Its width must be at least 30 cm;
• medium size washers 10 pcs.;
• small diameter washer 4 pcs.;
• drill 2 pcs. Its diameter must correspond to the size of the washer;
• a small part of a stationery knife 10 cm;
• screwdriver and wrench;
• simple pencil.

Thanks to this machine, cutting plastic bottles with your own hands is fast and efficient, and the thread has a uniform texture. The process of creating equipment includes several stages:

Markings are made on a wooden base to fix the washers. different diameters. For this you will need a simple pencil. Using a screwdriver, make through holes at the marks.

The width of the plastic tape can be adjusted by moving the washers to the desired distance. Basically, this gap is 1 cm. Use a stationery knife to make through hole. It is placed on top of metal parts.

An additional nut will help connect the knife to the machine structure. In this case, you should not tighten it too much. This will create discomfort during the work process.

When the equipment is ready, it is checked for functionality. To do this, the bottom of the bottle is cut off and secured between the nuts. Now one edge is cut with a sharp knife blade, and the other is turned clockwise. The result is a plastic tape the right size. The photo of cutting plastic bottles shows the work process.

Metal cutting machine for plastic bottles

We bring to your attention another idea on how to make a device for cutting bottles. For this you will need:

• a small piece of construction corner;
• stationery blade 10 cm long;
• small nuts 2 pcs.;
• metal drill;
• electric drill;
• hacksaw.

Manufacturing process:

A small through hole is made on the surface of the metal corner. Do the same with a stationery blade.

Having measured the width of the fixing nut with a hacksaw, make notches on the surface of the angle. In the future, they will help adjust the width of the plastic strip. The distance between each mark will be 1.5 cm.

The knife is fixed in the corner part of the metal base using an additional nut.

Note!

Next, the entire structure must be secured to a solid surface. The production of tape from bottles is carried out by rotation plastic product clockwise. You should not make sudden movements. This may cause damage to the plastic thread.

Photo of cutting plastic bottles

Note!

Note!

How to cut a bottle straight. 2. On both sides, plastic bottle bases can be placed in the cone parts and secured plastic rivets(Fig. 4). Required: bottle, skein of thread, cologne, matches and cold water. We wind the thread thickly in the desired place of the bottle, moisten it generously with cologne and set it on fire.

New amazing property PLASTIC BOTTLE - heat shrink. And how to make panicles and brushes from these ribbons. They persuade me to buy these machines. If you need an even stronger rope, several ribbons can be woven together, for example with a pigtail. In this simple way you can get out of a difficult situation.

One of the global problems of modern society is waste disposal. We would like to give you one of these useful tips on how to properly recycle plastic bottles and what can be made from them.

Idea: Machines for extracting rope from plastic bottles

Everything is done very simply, you just need to cut the bottle and pass it through the blade. Then you just need to pull the extended edge. Attention, the plastic bottle itself can also cut you, I recommend working with protective gloves and being extremely careful.

How to properly cut a 5 liter plastic bottle.

Find out in our new video life hack. We all know how easy it is to cut a plastic bottle, many of us have done it hundreds of times. And if you need to cut not plastic, but glass bottle, can you do it?

Rotating the bottle around its axis parallel to the ground, wait 2-3 minutes and pour water onto the flame. The bottle will burst smoothly.

HOW TO CUT A BOTTLE AND WHAT CAN BE MADE FROM IT

A thin ribbon can be cut even from a corrugated bottle of complex shape, while achieving high degree plastic bottle recycling. 1. Two plastic bottles of arbitrary volume for the reel. 2. Plastic bottles for cutting the ribbon, the longer the ribbon you want to get, the more bottles you will need.

If there is no suitable reel, then you can simply make it yourself from two neck parts of plastic bottles. The covers are connected using plastic rivets.

The number of connection points is at least 3, this is necessary for “non-rotation” when screwing in the conical parts of the bottles. The method for making such a strong braid has been known for a long time - spiral cutting of a tape of the required width with scissors from a plastic bottle.

This reel can be used to wind not only plastic braid but also, for example, stranded wire. 4. A plastic reel is also convenient in that enameled electrical winding wires can be wound onto it.

The operator’s work will consist only of installing the bottle and removing the finished coils of tape from the collapsible reels. I wish there was a machine for it that would weave something out of these ribbons, for example, nets for hammocks. Good fit, but there are not so many bottles with a smooth cylindrical part of the same thickness, and with corrugated and curved walls, the machine is always worse than hands and scissors.

And in Once again An ordinary plastic bottle helps us with this. Well, you decide for yourself what to make from such plastic tape. For example, you can weave something (a keychain or an animal).

Mesh fence

The knot can be melted, and this tape itself also has excellent heat-shrink properties. Next, we put three washers on the bolts (in the future, we will use these washers to adjust the thickness of the tape), put a blade on top, put one more washer each and clamp it with the thumbs.

You can store the cut tape on a special reel, which is very easy to make. Someone “completed the task and forgot,” but zealous housewives continue to delight their family with fresh herbs “from the windowsill.”

Read also:

And you can cut such a tape not only with scissors, I recommend making you a special device, a machine for cutting tape from a plastic bottle.

Other site visitors are currently reading:

This entry was posted in Prevention and tagged pregnancy by Nikitin. Bookmark the permalink.

How to cut a bottle at home lengthwise or into strips

Sometimes even the most ordinary thing can become excellent material for a spectacular and unusual decoration. This is, for example, a bottle. It's hard to believe, but it can really serve you well. So, now we will tell you how to cut a bottle at home.

Cut a plastic bottle lengthwise

The simplest example of a cut plastic bottle is a container bed. Making such a cut is absolutely not difficult.

1. To begin, choose a bottle that suits your size, color and shape.

   How to cut twine from a plastic bottle

   Then remove the wrapper and rinse thoroughly.

2. Next, use sharp working scissors to remove the neck (under the thread).
3. Now take a marker and draw a line for the future cut along the entire bottle (along its long circumference).
4. Well, all that remains is to cut your plastic brainchild along the intended line. In the same way, you can cut out only a certain longitudinal part of the bottle, obtaining the following usefulness in the household:

Cutting a plastic bottle into ribbon

There is another interesting technique for “cutting” plastic bottles - using tape.

To work, you will need a bottle, adhesive tape, a sharp knife (or scissors) and a little attention.

1. So, we wash and dry the bottle so that not a drop of old glue from the former label remains on it. It must be said that the adhesive plaster in this regard is an almost ideal remedy, because it does not move off the bottle and sticks to it quite tightly.
2. We begin to stick the patch above a level surface, since when initially pierced with scissors, the strip deteriorates a little. When it is completely ready, you will only need to cut off all the uneven areas.
3. We glue the tape further to see the width of our strip. Here you can see another advantage of the patch - it can be adjusted at any time, thereby changing the width of the tape.
4. When the strip is marked, we begin to slowly cut with scissors along the resulting spiral, in other words, along the edge of the adhesive strip. By the way, you can just as well use duct tape for windows. The result will be the same!
5. In this way, the tape can continue to be glued, but if your eye is 100% sharp, then you can do this without gluing.
6. Having cut the even part, we simply remove the bottom of the bottle.
7. This is what we ended up with:
8. You can make a lot of useful and unusual things from cut out ribbons. For example, you can weave a candy bowl or a bowl for cookies.

Is it possible to cut a glass bottle at home?

Of course you can. And for this you don’t need any complicated men’s tools. It is enough to prepare:

• glass bottle of your choice and color;
• strong wool threads;
• any solvent (alcohol, kerosene, acetone, etc.);
• scissors or a sharp stationery knife;
• protective gloves and glasses;
• matches or lighter;
• deep basin with cold water.

1. We take the prepared woolen thread, measure and cut off such a piece of it that it is enough for about three to four turns around our bottle. Next, we immerse this piece of thread in the solvent and immediately wrap it around the bottle. Of course, we do the winding where it is planned to make the “cut”. If you want, you can simply wrap the thread, or tie it in a knot for security.
2. Next, set fire to this thread using a match or lighter. Please note that at this moment it is recommended to keep the bottle in an inclined position, that is, strictly horizontal to the ground. While the thread is burning, carefully rotate the bottle around its axis.
3. The light will burn for no more than 40 seconds. As soon as it goes out, immediately lower the bottle into a bowl of cold water.
4. Immediately after this, you will hear the sound of cracking glass, very characteristic of the human ear. At that very moment your bottle will split into two parts. As you probably guessed, the described method is based on banal school knowledge of physics, which states that with a sharp change in temperature, glass first expands and then contracts, which is why a fracture occurs.
5. Now all that remains is to grind off the sharp edges of the cut using a regular sandpaper or whetstone.

By adding a little imagination, you can make, for example, very nice vases from such half-bottles.

Video on the topic:

So, now you know how to easily and simply cut a bottle, be it plastic or glass. Finally, we offer you a few interesting videos on the same topic

The most interesting articles:

Machine for cutting tape from a plastic bottle

Machine for cutting tape from a plastic bottle

Machine for cutting tape from a plastic bottle

We'll tell you how to make a machine for cutting durable tape from Pet bottles. It's no secret that a polyethylene bottle has the ability to shrink when heated. Many people use it as heat shrink material. To do this you will need a bottle cutter.

Material: corner 100 x 50, a piece of square pipe, a pin with a diameter of 8 mm, the remains of a sheet 3 millimeters thick, a tube with internal diameter 9 mm, two M5 bolts with square nuts, the same studs with a diameter of 8 millimeters and a length of 60 mm, cutting tool.

See what comes out of this on the video of the “Homemade Vitmana” channel. The master will make the machine from an ordinary square pipe 25 x 50. It is better to use a U-shaped aluminum profile, the master did not find one. Therefore, it is used as a workpiece square pipe. It will have to be cut in half. A corner cut from a 160 x 80 pipe will be welded to it. There will be a hole around the perimeter to secure it to the table. I made the machine stand from a square tube and cut the slots with a hacksaw. This was the hardest part of making the jig. I welded a corner at the bottom. Drilled a hole for mounting to a wall or other place. I put a pin with a diameter of 8 mm to put on the tube.

I screwed the blade onto the bolt. I drilled a hole with a diameter of M5 and clamped it with a bolt so that the blade did not vibrate. I screwed the mount under the drum through the gasket to the side. M6 bolts. A drum made of two plates 3 millimeters thick. I drilled holes in them for the studs and screwed them together.

I made a handle from a sheet of C grade, bent it, tightened the pin and nut, and put on the tube so that it could be rotated well.

From 4 minutes on, the video shows how a machine for producing plastic rope works.

Bottle tape winding machine

Today we will show you how to modernize manual bottle cutters and demonstrate a prototype of the machine. Principle winding machine simple and obvious - this is winding the resulting PET tape from plastic bottles directly onto reels. This is more relevant for obtaining a larger number of plastic strips and the most popular ones are not wide up to 3 mm, which is long, tedious and still needs to be rolled by hand.

The solution is simple and obvious - you need to use a stand or frame for both the reel and the bottle cutter itself, or simply fix it separately. I quickly made a prototype. Use a stool as a frame. A sharpener cutter with side cuts, the width of the tape at different cuts is approximately from 1 mm to 3 mm. You can use any bottle cutter to cut easily, accurately and without breaks.

The pin shaft rotates through improvised bushings in stationery clips, which is convenient for quickly replacing coils. We use the necks of the plastic bottles themselves. Removable handle and you can connect a screwdriver.

Some nuances have emerged that need to be taken into account in the future. A reel of necks is not very suitable; it is advisable to make the diameter larger than that of bottles, otherwise the wide tape will unwind itself. It is also necessary to select the distance from the reel to the cutter, it is convenient for winding, it weakens jerks, improves accuracy and quality. Connecting the drill should be done through a reduction gear. If you take this issue seriously, you need to increase the dimensions of the frame and coil itself, replace the bushings with bearings, add a laying mechanism, select the type of cutter and allocate space for all this.

Let's sketch out a few simple ones quick options machine tools TO cutting table, deck or stump, screw the bottle cutter itself and two slats or corners for the reel. Attach a bottle cutter and two slats to the board, secure it to the base, say, on the table with clamps. You can make a frame with slats alone and even reinforce it with jumpers and a cross-shaped truss; attach the frame to the table with clamps. Use as a frame for trestles, furniture (stool, chair, table), etc. Use an inertial fishing reel and attach a bottle cutter directly to the spinning rod.

There are many options, but the meaning is the same. In total, with a little effort and ingenuity, it is easy to simplify and speed up the process of dissolving bottles into ribbons and coiling, as well as winding and rewinding ropes or twines, etc. There is room to turn around...

For now this is a simple prototype and in this case There are plans to further develop the topic more qualitatively. Vitaly and the Master Bobrov channel were with you.

Device for cutting tape from plastic bottles

Radik943 24-03-2014, 14:26 68 805 Devices / Machines

Device for cutting tape from plastic bottles. I saw a video on the Internet where a kind of ribbon was made from an ordinary plastic bottle. The scope of its use is of course very limited.
I saw a video on the Internet where a kind of ribbon was made from an ordinary plastic bottle. The scope of its use is of course very limited.
Used during construction wooden fence, where he strengthened by tightening the place of the nailed board nail to a horizontal bar. In winter, this section of the fence was constantly covered with a large amount of snow, as a result, many boards flew off the fence, so to speak. I used ordinary iron wire before, but it quickly rusted and became unusable. Buying galvanized is expensive. The tension in the twine weakened over time. As a result, I began to tighten plastic bottles using tape and partially melt them after tying them to secure the connection. This design stood successfully for one winter. The method of producing tape from plastic bottles is surprisingly simple and accessible. You only need two M5 bolts (no longer needed) with a length of at least 30 mm, two nuts and washers for them, a wooden block or board, a blade of a stationery knife, and also a few washers bigger size, for example, with a hole of 8 mm (their number depends on the thickness of the tape being cut). First, install the washers large diameter in this case, on the block close to each other and mark the holes with a pencil.
We drill holes with a drill using a 5 mm drill bit. Insert the bolts.
We insert large diameter washers in two pieces (the number depends on the thickness of the tape you need) so that there is a gap between them.
We insert the stationery knife as shown in the photo.
We put small washers in the bolts and tighten them with nuts (do not overtighten, otherwise the blade will burst).
Cutting it off bottom part bottles and make a small narrow cut in the form of a strip counterclockwise. We insert the strip into the hole between the large washers of the cutting device and pull without jerking while holding the bottle with the other hand. Wood block I first secured it with a clamp on the table.
The tape did not always turn out to be uniform in width, but for me this was not so significant. Become the author of the site, publish your own articles, descriptions of homemade products and pay for the text. Read more here.

To write a comment you must log in to the site via social media. networks (or register): Regular registration

Information

Visitors in the Guests group cannot leave comments on this post.

Machine for cutting tape from a plastic bottle

One of the global problems of modern society is waste disposal. Proper use of household waste will help you not only make the environment much cleaner, but also solve many problems without special effort and costs. We would like to give you one of these useful tips on how to properly recycle plastic bottles and what can be made from them.

Plastic bottle tape:

You can make many useful things from a plastic bottle, and one of these simple crafts is a very strong ribbon.

Figure No. 1 – Tape from a plastic bottle

One plastic bottle will yield about ten meters of such tape (depending on thickness). And you can cut such a tape not only with scissors, I recommend making you a special device, a machine for cutting tape from a plastic bottle.

Figure No. 2 – Machine for cutting tape from a plastic bottle

In order to make it you will need a blade from a paper knife, wooden stand, two bolts, two nuts and about fourteen wide washers.

First you need to mark your platform, to do this, attach two washers (leave a gap of about two millimeters between them) and drill holes with a suitable drill.

Figure No. 3 – Marking the workpiece Figure No. 4 – Drilling two holes

Then we insert the bolts into the hole and put on a couple of washers (by the number of washers you put on you adjust the height of the knife and thereby the width of the resulting plastic tape).

Figure No. 5 – Insert bolts into holes Figure No. 6 – We put washers on the bolts

Figure No. 7 – Putting the blade on the bolt

Be careful, the blade is very sharp, don't cut yourself! Having put on the blade and installed it in such a way that it can be clamped with washers, put several washers on top of each bolt (five pieces)

Figure No. 8 – Fix the blade with washers and tighten the nuts tightly

I had washers of a narrow diameter, and I didn’t want to break the blade of the knife, but in general I recommend taking a narrow blade and wide washers so that it would be well hidden there and you wouldn’t cut yourself on the blade. And also remember that the nuts must be tightened very tightly so that your blade does not tear out!

Everything is done very simply, you just need to cut the bottle and pass it through the blade.

Figure No. 9 – Passing the bottle through the blade

Figure No. 10 – Pulling a bottle through the machine Figure No. 11 – Thin tape cut from a plastic bottle

Well, you decide for yourself what to make from such plastic tape. For example, you can weave something (a keychain or an animal).

Figure No. 12 – Braided keychain

Another useful tip! Using a ribbon made from a plastic bottle, you can tie something very tightly and reliably. The knot can be melted, and this tape itself also has excellent heat-shrink properties.

Figure No. 13 – We tighten two pieces of wood using heat-shrinkable plastic tape Figure No. 14 - An example of what happens

We hope that you will be prudent environment and apply useful tips taken from bip-mip.com

DIY plastic bottle cutter

There are many devices on the Internet to cut from bottles plastic tapes and ropes or even fishing line. Among them there are many complex devices and simple ones. But this cutter is distinguished by its ingenious simplicity and elegance. Well, you don’t need to grind any parts for it, everything is at home or can be bought very cheaply. The main thing is that you can make it yourself in literally minutes. With it you can adjust the width of the tape and make it in different sizes.

Just look what this Chinese store has for the garden.

What tools and parts are needed to make this simple cutter?

This is the blade that will perform the actions. A utility knife or, as in this case, a pencil sharpener will do. You need washers and 2 screws. All you need is a screwdriver.

Using a screwdriver, remove the blade from the sharpener. And now we need to decide what width the tape will be cut from PET bottles. By combining washers, the height and width of the rope are adjusted.

For the product you will need a table into which you don’t mind driving a couple of screws. Although, you can place a board under the machine and fasten it to the table with clamps.

When a place for the cutting machine has been found, screw in two self-tapping screws with washers at a distance from each other. Set the blade to the desired height and tighten it with self-tapping screws.

Now we prepare a blank for cutting rope from a plastic bottle.

how to cut ribbon from a plastic bottle

Carefully separate the bottom using a stationery knife. The cut should be smooth. We fill the workpiece into the cutter. We process the one and a half rack with our own hands and a simple machine. To make the thread even, press a little from above. We pull the finished tape from the machine with a cutter.

There are many devices on the Internet to cut plastic tapes and ropes or even fishing line from bottles. Among them there are many complex devices and simple ones. But this cutter is distinguished by its ingenious simplicity and elegance. Well, you don’t need to grind any parts for it, everything is at home or can be bought very cheaply. The main thing is that you can make it yourself in literally minutes. With it you can adjust the width of the tape and make it in different sizes.

Just look what this Chinese store has for the garden.

What tools and parts are needed to make this simple cutter?

This is the blade that will perform the actions. A utility knife or, as in this case, a pencil sharpener will do. You need washers and 2 screws. All you need is a screwdriver.

Progress

Using a screwdriver, remove the blade from the sharpener. And now we need to decide what width the tape will be cut from PET bottles. By combining washers, the height and width of the rope are adjusted.

For the product you will need a table into which you don’t mind driving a couple of screws. Although, you can place a board under the machine and fasten it to the table with clamps.

When a place for the cutting machine has been found, screw in two self-tapping screws with washers at a distance from each other. Set the blade to the desired height and tighten it with self-tapping screws.

Now we prepare a blank for cutting rope from a plastic bottle. Carefully separate the bottom using a stationery knife. The cut should be smooth. We feed the workpiece into the cutter.
We process one and a half racks with our own hands and a simple machine. To make the thread even, press a little from above. We pull the finished tape from the machine.

The material from which PET bottles are made contracts when heated. Thanks to this, a tape made from it can be used instead of rope or clothesline for a strong connection various materials makes it possible to produce various. Cutting ribbons with scissors is almost impossible - I made a special device for this.

Assembling a machine for cutting tape from a plastic bottle

You will need: several large washers 2 bolts with solid threads, nuts and washers a utility knife blade with a hole a piece of plywood (boards, laminate).

On the plywood platform we place 2 large washers pressed against each other (photo 1), mark their centers. We drill holes in them according to the diameter of the bolts. Then with reverse side we make a recess in the platform according to the shape of the head so that they “sink” and the bolts do not rotate around their axis (photo 2). To cut a tape of a certain width, we place so many large washers on the leg protruding from the back side of each bolt so that their total thickness is this width. For example, to cut a 5 mm tape you will need 3 washers with a thickness of 1.58 mm.

Place a knife blade on top and place at least one more large washer on it (photo 3). Align them and tighten the bolts with nuts. The machine is ready. We fix the platform on the table with self-tapping screws or a clamp.

Cutting tape from a plastic bottle

Remove the bottom, cut a strip and insert it under the knife. With one hand we hold the bottle and press on the cork, with the other we pull out the tape to be cut.

A two-liter bottle yields more than 25 m of tape

Important!
We position the knife blade so that the protruding part of its cutting edge is in the area shortest distance between the washers.

How to cut tape from a plastic bottle video

First, watch how to use a simple tool to cut a plastic bottle into neat strips in this video from the Science Vetal channel. Alternative developments are shown below.

Smooth strips from a PVC bottle

It is shown how to make a cutter from a block using the example of an original product presented on the SergeyTron v2.0 channel. The mechanism of operation is considered. You will need: a utility knife, a block of approximately 50 x 50 x 150 mm, a pin of at least 350 mm, two screws, two washers and a piece plastic pipe 200 mm.
Available material is true.

Saw the block into two parts 100 millimeters and 50 millimeters long. The first will go to the cutter, and the second to the ribs.

Let's start with the pin. First, a little about its tilt. The wider the strip, the more actively the bottle moves away from the cutter. The pin should be tilted. Don't overdo it, the strip will have to be pulled with difficulty, and the cut will be bored out. If you don’t make a slope, the strip will fall on the bottom of the cut and will not become straight and will break.

You can drill the hole at an angle, straight and make a bent 4. This angle 4 trick is a must for those who want to cut a straight strip on a block cutter. This device has a slope of 7 degrees. Plastic pipe nozzle. A strip 5–10 mm wide is cut. 10 – 15 mm without nozzle. If you don’t want to suffer with the pin, then you need to make the cutters sound like bars so that you can replace the bored cuts.

This video tutorial shows how to cut a plastic bottle into even strips using a reliable tool. This cutter is about 1 year old. I made it in his master as an experimental one, but it cuts perfectly smooth and there is no need to redo it. The secrets of this miracle are that the blade is located in the middle of the cut, so that it will or will not jump before the cut. It's kind of like a guide.

I cut at an angle and adjusted the blade with nootropil to the desired tape size. The strip was cut at one end 10 mm. And on the other 9 mm.

The author made this design by accident, without calculations. But the main thing for leveling the strip is not the cutter, but the preparation of the plastic bottle before it. Take a regular A4 sheet. On one side, draw into a tape of the required size 9.5 mm. Another cutter option.