DIY chandeliers in a wooden house. Wooden chandeliers

home

Security systems

Since ancient times, people have valued what was created by nature. In the old days, almost all household items were made from wood. And this is no coincidence. More environmentally friendly and safe material difficult to find. And the natural beauty of the unique texture amazes with its exquisite outlines. That is why modern design interior design is incomplete without this valuable material. Wood can be used not only for decorating a room or for making furniture. Wooden lighting fixtures look unique, original and inimitable, especially if it is homemade lamps made of wood. Often such an element in the interior is used to emphasize a certain style. Therefore, the configurations can be very diverse.

Simplicity and sophistication. Driftwood chandelier

Making a lamp from wood with your own hands is not that difficult. Moreover, some products do not even require a special type of wood. You can even use driftwood found in the forest. Moreover, each of them has a unique shape, each of its curves is perfect, since it is a creation of nature itself. Now the main thing is not to spoil it natural beauty during processing. A lamp made of wood (driftwood) will become not only a source of light, but also a wonderful ceiling decoration.

Manufacturing technology

Preparatory work consists of cleaning the driftwood from bark and unsuitable wood, as well as thoroughly drying it. Then the driftwood is thoroughly sanded using sandpaper. Based on the type of lamp, the necessary components are purchased. It should be remembered that wood is highly flammable, so a lamp made of wood requires the use of energy-saving lamps. LED ones are also suitable.

Holes for wiring should be drilled in special places. On the side of the branches that will be located closer to the ceiling, you can use a narrow blade to make grooves for the wire. After laying the wire, all holes must be filled with putty. At the ends of the driftwood, sockets are installed on which lamps and shades are attached. The driftwood is attached with chains to the ceiling. All wooden elements must be opened with varnish. The wooden ceiling lamp is ready.

Japanese style. Desk lamp

Table lamps can be an excellent interior decoration. Wood is the best choice for making such a miracle. To ensure that the work does not cause unnecessary trouble, you should prepare all materials and tools in advance. To make it, you will need a processed piece of board, square (preferably the wood is the same), light veneer, wooden tenons, PVA glue, and a drill with a disk attachment. For such a lamp, a lamp with a small base is used. Electrical components also require a cartridge and a wire.

Manufacturing process

Table lamp It is very easy to make from wood with your own hands, especially if you have the appropriate skills.

First you need to drill holes in the corners of the wooden plank. To do this, measure one and a half centimeters from each edge and outline the squares on which the vertical bars will be installed. Marks are made for holes in the center of each square. If the tenons are made by hand, then their size should be adjusted to the diameter of the drill. Otherwise, the drill should be selected according to the size of the dowels. There is no need to drill holes all the way through. Up to half the thickness will be enough. It is also necessary to drill holes in the bars and glue spikes there. In the center of the base board you need to make big hole for the cartridge. If difficulties arise, you can simply drill a hole for the wire. Shallow cuts should be made between the holes on the base for the veneer. You also need a deep enough channel for the wire. The wire cord must be secured in the cut. A table lamp made of wood, created with your own hands, is almost ready. Remained final stage- assembly. The bars are glued to the stand, the cut veneer plates are inserted into the cuts. The original wooden lamp is ready.

Lamp made of wood and coffee service

Making so original lamp is done quite simply. To do this, you need to take a suitable size board made of valuable wood, pre-treated with stain and varnished. You will also need three coffee cups and saucers with holes in the bottoms (you can drill them to enhance decorative effect It is best to use cups made from thin glass. The wires connected to the sockets are passed through the holes in the lampshades (saucers and cups) and attached to the board. All wires are brought out to the part of the board that will be hidden, connected to each other and to the main wire. This design can be mounted on the wall or hung on the ceiling with chains or a twisted cord. Option c is more modern. But with the help of such a lamp you can create the effect of antiquity. To do this, instead of cups and saucers, you can use clay pots, and wipe down the board itself sandpaper. This wooden lamp will fit perfectly into the kitchen design. country house.

Original arrow lamp

Dimensions are selected individually based on the characteristics of the interior. It looks quite impressive when the arrow lamp occupies the entire wall vertically. One such device is enough to illuminate the entire room.

When making such a miracle you will need imagination. The most simple solution will take long board for the base of the arrow and several small strips for the tip and fletching. All parts must first be fastened together with glue. For reliability, you can additionally connect them with wooden plates and screws. It is best to use an outdoor garland as a lighting element. Based on its size, holes should be drilled in the wooden structure and light bulbs should be inserted there. On back side It is necessary to secure the wires well with tape and glue. It will not look very neat, but all this will be hidden when installing the lamp.

With a little imagination, you can make such original lamps from wood. Photos may give some ideas.

Plank lamp

Every carpenter retains many valuable wood scraps, which, as a rule, are difficult to find a use for, but you shouldn’t rush to throw them away either. You can make an unusual one from them. Moreover, for this design you won’t even need nails, but a lamp like this will come out of wood. The photo cannot even convey all its beauty and effectiveness.

To make it you will need seventeen identical sized boards. Multi-colored and different textured boards look more impressive. Each plank must be given a wedge shape. To attach the blades to the base you will need wooden pins. A hole is made in the base into which a cartridge with a wire is placed. The design is extremely simple to manufacture, but it looks amazing in any interior.

Log floor lamp

A real masterpiece of LED lighting technology is quite easy to make with your own hands. Create original LED lamp can be done using an ordinary log, the dimensions of which depend solely on the idea.

To make a lamp you will need wood glue, a transparent tube, varnish wooden products, LED Strip Light, brush, hammer, saw and drill.

Manufacturing sequence

A well-cleaned and dried log must be cut into uniform rings of approximately 5 cm. A hole should be made in the center of each ring, corresponding in diameter to the tube with LEDs. It should fit tightly there. Holes are made in the lower and upper rings to cover half the thickness of the log. A small hole is made in the base for the wire. Each ring is varnished. Then a tube with diodes is inserted into the holes of each of the rings.

To make the interior modern apartment or in a country house in an original, interesting and effective way, you can make lamps from wood with your own hands. Photos of the most unusual specimens made from branches, clothespins and other wooden elements are shown below. There are simply a huge number of options.

In order to create wooden lamps with your own hands, you need to use your imagination. Floor lamps made from clothespins are simple, cheap and original. Such a lamp requires a frame made of metal rods and wooden clothespins. Its external outline depends on the bending of the frame.

A chic chandelier made of branches will transform any room. It's very easy to make it yourself. Thin branches of some trees do not even need to be treated. The wire is drawn from the main source, wrapping around each branch, and approaches the lighting socket.

Having imagination and certain skills, you can make your own wooden lamps with your own hands. The photos given in the article are only a small part of what you can come up with. Moreover, wood is the most environmentally friendly material.

When planning the interior of your home, you need to pay a lot of attention to little things, such as paintings on the walls, curtains, sconces, and so on, because it depends on them how stylish and cozy the room will look. Not last place The lamp is central to the design of the apartment. With its help you can increase or narrow the space, as well as give a special charm to the room. The stores offer a wide range of lighting fixtures in the most different variations– these can be floor sconces, miniature spotlights or a classic pompous design that occupies a significant part of the ceiling, but they are often quite expensive. To make the interior more unusual and exclusive, you can make carved wood chandeliers with your own hands. They will, without a doubt, become the main highlight of any space.

Advantages and disadvantages of wooden ceiling lamps

DIY wooden chandeliers will decorate absolutely any home. Such designs look especially good in apartments with a rustic and brutal style, but by decorating the natural material with dark or bright paint, you can get a lamp that is suitable for high-tech or modern interiors. You can make your own lamps from plywood or from a single piece of wood.

Before deciding whether to hang a wooden chandelier on the ceiling, you need to familiarize yourself with all the pros and cons of such an item.

Advantages of wooden chandeliers:

Wood is easy to process, so it can take on completely different shapes.
Wood is the most environmentally friendly material; it not only does not emit harmful compounds, but also helps improve immunity.
Wooden lamps make the room more comfortable and create the impression of unity with nature for the people in it.
Hand-made wooden chandeliers do not require large investments, but at the same time they look very expensive.
A large number of wood species allow you to choose the desired color of the lamp without using paint.
A wooden ceiling lamp can be decorated with metal, glass or even stones.

A DIY chandelier made of wood is quite simple to make and looks very decent, but this material also has some disadvantages.

Disadvantages of wooden chandeliers:

Wood used in tandem with heating devices (which includes most light bulbs) must be treated by special means, protecting this material from fire and damage by insects.
Exclusive species such as oak and mahogany are quite expensive. Therefore, in order to decorate your home with chandeliers from them, you will have to spend an impressive amount of money.
If you use untreated or poorly dried wood, the finished lamp may crack or change its shape after a few weeks.

Of course, wooden chandeliers have their drawbacks, but with proper processing and care, such accessories will serve you for many years.

Simple wooden chandelier

This hand-made wooden chandelier will fit perfectly into modern interior kitchens in high-tech or modern style. It is a bar with several spotlights implanted into the cups.

To make a strip chandelier you will need:

jigsaw or hacksaw;
pliers and wire cutters;
screwdriver;
hammer;
construction pencil;
special protective compounds for wood;
stain or brown paint;
wooden board 20-25 cm wide;
tape measure or centimeter;
drill;
drill for working with tiles;
medium-width paint brush;
cups and saucers 3 pcs.;
rubber gaskets;
wires;
small light bulbs with sockets 3 pcs.

Before you begin work on the manufacture of such a chandelier, the wood must be treated with special compounds and allowed to dry completely. When choosing a material, it is advisable to inspect the board for knots and traces of insects.

Manufacturing

Master class on making a simple strip lamp for the kitchen:

We measure out 50-60 cm of boards and saw off the excess parts with a jigsaw.
We drill three holes in the places where the lamps will be located. The distance between saucers should be at least 10 cm.
We process the board with sandpaper. First you need to use coarse-grained sandpaper, and then fine-grained sandpaper.
Now you can cover the plank with stain. If oak or mahogany was used, then this step can be skipped.
We drill a hole in the center of each saucer and each cup.
First insert the cartridge with the wire into the cup and then into the saucer. Repeat this operation with the remaining cups and saucers.
Connect the structure of dishes and cartridges to the bar by threading the wires into the pre-made holes, and then secure it on the back side.
Mount the resulting chandelier on the ceiling.

A chandelier-bar will look perfect in the kitchen above work surface, it is also ideal for dividing the room into a cooking and relaxation area.

Wooden wheel chandelier

This chandelier is more difficult to manufacture than the previous one, but it also looks more noble and impressive. The wheel-shaped lamp will fit perfectly into a rustic interior or a loft-style room.

For this type of chandelier you will need following materials and tools:

a little wooden square assembled from boards bigger size than the future wheel.
protractor;
large compass;
metal ruler or building level;
construction pencil;
jigsaw or circular saw;
glue;
self-tapping screws;
plywood sheet;
narrow wooden boards;
hammer;
nails;
iron rim;
stain;
metal chain;
drill with a round attachment and drill;
wires, sockets and light bulbs 4 pcs.;

Master class on making a wheel chandelier:

The finished wheel chandelier can be attached to the wall or hung from a chain on the ceiling. It is perfect for lighting a dining room or living room.

Such a wooden chandelier will become the main decoration of the interior of a country house, and will undoubtedly attract the attention of every guest.

All photos from the article

Over the past few decades, there has been virtually no design direction left that does not use wood products to one degree or another. A lamp in general and a chandelier in particular are objectively one of the most noticeable interior items, therefore hanging chandeliers made of wood are deservedly considered perhaps the most popular trend at the moment.

Features of wooden ceiling lamps

Any wooden object in the interior of a room is associated on a subconscious level with warmth and comfort. Traditionally, homemade wooden chandeliers are used in all areas of oriental themes, where geometric regularity of lines and at the same time warmth natural wood promote peaceful relaxation.

A trend like country music is generally impossible without using natural materials. The rural style has always been characterized by the use of slightly rough, unusual shapes. The massive appearance of such lamps creates a feeling of reliability.

An antique wood chandelier is associated with medieval romance and knightly tournaments. Forged inclusions metal elements They give this design an exquisite lightness and unique flavor.

Advantages of wooden lamps

The first thing that catches your eye is the naturalness of such a chandelier. It is difficult to find a more environmentally friendly material. Moreover, being constantly near a heat source, wood releases health benefits into the atmosphere. essential oils and microelements.
Processing technology of this material, as a rule, is not very complex. Assembly is relatively simple wooden structures accessible even to children.

Wooden dacha chandeliers are deservedly considered to be perhaps the most the best solution . After all, the dacha itself is intended for countryside holiday closer to nature.
The price of the structure plays an important role. Even if you use, the total cost of a homemade chandelier will be affordable for almost any budget. But as a rule, all costs end with the purchase of cartridges, light bulbs and wires, and a few planks or branches can always be found at any dacha.

What are the disadvantages of such lamps

Opponents will immediately point out to you the fire hazard of such a chandelier. There is, of course, some truth in these statements, but with proper installation and use of LED or other low-heating light sources, you are in virtually no danger. In addition, there are a lot of natural impregnations on sale that prevent fire.

Important: such homemade lamps, no matter what you impregnate them with and no matter how competently you assemble them, are highly undesirable to place near sources of open fire. For example, next to the fireplace or in the barbecue area.

Whatever one may say, wood is a living material and very hygroscopic. Wooden chandeliers for a bathhouse look great, but it is better to install them away from showers and steam rooms. Constant temperature change and high humidity are far from conducive to the preservation of the array. IN in this case A wood-look chandelier would be more suitable.
Another serious problem with this material is the high probability of damage to the array by various types of pests. But as mentioned above, no one is stopping you from impregnating your chandelier with natural protective compounds.

A few words about self-assembly

A do-it-yourself antique chandelier made of wood is a very real thing. In essence, all you need is a great desire and a standard set of carpentry tools, which is found in almost every home.

Nature has given humanity a unique construction material- tree. One has only to think about how many things can be made from this universal material: from a tiny match to a gigantic log house. In the interior, it has found active use in country and eco-style. Despite the fact that modernity gravitates towards synthetic, artificial materials, interior elements made of wood do not lose their popularity and universal love.

An antique lamp (chandelier) can give the interior a noble and unique look.

An antique lamp can be made not only from wood. Having worked a little magic on old chandelier with a metal body, you can create a unique masterpiece that will harmoniously fit into Gothic style home and will become the highlight of the interior. Modern dyes age so realistically metal surfaces that there is no doubt that the piece of furniture has a long history and keeps family secrets.

Artificial aging of a metal lamp

To artificially age objects you will need metal wool.

If you already have a lamp that does not have enough attractiveness and color, you can use it. Since there is no need to assemble parts, this makes the work simple and accessible even for novice craftsmen and lovers of unique homemade things.

Tools and materials:

metal wool;
Toothbrush;
flat brush;
dispersion paint;
flat synthetic brush;
round trim brush.

Clean the surface of the lamp thoroughly with steel wool. For better cleaning, soak it in a concentrated soap solution. If such manipulations are not enough to thoroughly clean the lamp, use an old toothbrush. It will help deal with dirt in the recesses. After completing surface preparation, remove moisture with a soft, absorbent cloth. All further work can only be performed after the lamp has completely dried.

Choose dispersion paint Brown. Using a flat art brush, apply it to the light fixture. If it becomes necessary to re-paint, wait until the first layer has completely dried.

To artificially age a lamp, it is necessary to apply brown paint as the first layer.

After finishing working with chocolate-colored paint, pour light green paint into a small convenient container. To work with this shade you will need a round crosscut brush with maximum hardness. Typing on a brush required amount paint, blot it thoroughly on a piece of paper. Using an almost dry brush, walk over the surface of the floor lamp. When painting, do not aim to thoroughly fill in recesses and grooves. As a result of your creative efforts, the chandelier should take on the appearance of a product with a slight touch.

Apply a small amount of wax into some of the indentations; preference should be given to a golden yellow color. The procedure is most conveniently performed with your fingers.

You can decorate a new lamp with paper grape leaves, the surface of which is treated using the verdigris method. Decorative pendants for a chandelier can be made from glass beads strung on gold wire. Try to choose the thinnest wire so that its presence in the decor is minimally noticeable.

Return to contents

A cart wheel is enough interesting solution to create a lamp.

In a big city, finding a wheel from an old cart is not easy, but in the rural outback such a rarity is not uncommon. Before you start creating unique chandelier, prepare necessary materials and tools:

drill;
an old cart wheel;
decorative chain;
drying oil;
turpentine;
dowels;
pliers;
lamps;
screwdriver

Carefully treat the surface of the wheel with a drill and iron brush.

This will help get rid of decayed wood and road dirt. In a small container, mix turpentine and drying oil, apply the resulting mixture in several layers to the wood. Metal parts Treat the wheels with rust solvent. When choosing the latter, give preference to a product with an anti-corrosion effect.

To secure the light sources, the role of which will be played by 6 E14 lamps, and the exit of the wires in the wheel, it is necessary to drill blind holes. Screw the adapters into the sockets. Nylon dowels with a diameter of 1 cm are suitable for their manufacture. Screw the cartridge itself onto the dowel, do the work so that when screwing the counter grooves coincide. Pull the wires into an inclined channel and connect the sockets in parallel.

Can be decorated with a chain. To artificially age it, place the chain in a preheated oven. To secure the chains, you will need rings, the role of which can be played by steel wire with a diameter of at least 4 mm. Place the extreme links of the chain into rings and connect them to the forged elements.

The topic of our article is wooden ceiling lamps. We will analyze the advantages and disadvantages of this material both from the point of view of design and from all other aspects; We will find out where these lamps can be used, and where it is better to use other materials.

Finally, we will learn how you can make a wooden lamp with your own hands with little effort and time.

What is wood associated with in room design? First of all, with antiquity, with the Middle Ages. With time, when people woke up to the singing of birds, and not the noise of cars outside the window; when men were courageous, women did not know the word “emancipation”, they were punched in the face for meanness, and life was much simpler and clearer.

That is why wooden lamps most often have deliberately ancient shapes. For example, chandeliers in the shape of a cart wheel are very popular.

After all, this is what real, let’s say, indoor lighting systems looked like several centuries ago: an old wheel on chains or ropes was suspended from the ceiling, and candles were placed on it.

Why is a wheel with spokes convenient as a stand?

Why did the ancestors settle on this form?

When the candles were placed evenly, it gave equal illumination to all parts of the room;
The spokes created minimal obstruction to the light, unlike a solid rim.

They have the same advantages modern stylizations; of course, instead of wax candles or rays lamps are used. Most often, of course, also in the form of a candle.

However, we digress. What's good and what's good about wood? ceiling chandeliers?

Features of the material

Advantages

Wood is not just environmentally friendly. Wood not only does not emit harmful substances; against, for a long time it saturates the air with aromatic resins, which make breathing easier for asthma patients and relieve inflammation of the respiratory tract...
What can I say - you probably remember how easy it is to breathe in a recently felled wooden house!
Wood is easy to process, which opens up wide scope for creativity. If the manufacture of a lamp made of plastic or chromed metal requires devices that are not available in a standard city apartment, then lamps made of wood require a minimum set of hand tools for manufacturing.

However, alas, not all features of wood as a material for a lamp are as pleasant:

Flaws

A tree is still flammable material . Placing wooden elements close to incandescent lamps that are going out of fashion is an extremely bad idea; a burnt contact in the lamp socket can also lead to a fire.

Wooden chandeliers are susceptible to attacks by bloodthirsty bugs- woodworms, fungus and other evil spirits.

Note: conifers wood suffers from insects and rot to a much lesser extent.

In addition, for deciduous species there are antiseptic impregnations, which at the same time reduce the flammability of wood.

Wood - hygroscopic material . It absorbs moisture from the air; when drying, it can change volume, deform and crack.
If we want our lamp to retain its functionality for a long time appearance- we will have to provide it with more or less constant temperature and humidity.

conclusions

The negative features of wood are not given to dissuade you from purchasing or making wooden lamp, not at all. Let us repeat, this is a wonderful, very beautiful and easy to process material.

However, you need to use it wisely:

Wooden lamps must be shaped in such a way that all heating elements (sockets and lamps themselves) are as far as possible from the wooden structural elements.
It is better for the lamps to point upward: then the upward flow of heated air will not cause deformation of the wood.
Standing apart are the lamps, the very style of which involves the use of natural cracks in dried wood. For example, a log with lamps suspended on chains looks great both dried out and cracked.

For reasons fire safety It is undesirable to place wooden chandeliers under flammable ceiling elements.
Yes, the same log on chains will look amazing under an equally old-looking one; however, if it catches fire, the fire will spread very quickly.
Wooden lamps are perfect for a bedroom or living room. But in the kitchen with its abundance of steam when cooking or in a damp bathroom, wood is inappropriate.
It will crack quickly; besides raw wood- is no longer a dielectric at all.

If a phase is shorted to the wooden elements of the lamp, it is quite possible to receive an electric shock. If at this moment you hold on to a grounded pipe or bathtub, troubles can be very serious...

Homemade products

Need I say that something made with your own hands is much more pleasing than something purchased? Yes, your lamp may not be as neatly made as a store-bought one; but the joy of creativity is worth coming to terms with the small shortcomings of the product.

In addition, you will know absolutely for sure that your lamp was made in one copy. Not a single guest, coming to you, will see exactly the same chandelier as at home. Homemade ceiling chandeliers are always exclusive.

Coffee service

We will need:

Dry board from any wood. The texture of ash is very beautiful; oak does not need to be stained or varnished. But ordinary pine, spruce or birch will also work.
Three translucent coffee cups and three saucers to go with them.
Three cartridges for a small base with fastenings for them.
Three matching light bulbs. Preferably LED lights: remember the fire safety recommendations outlined just above.
Three or six rubber pads. The quantity depends on the method of attaching the cartridges.
Meter - two two-wire copper wire minimum section. 0.75 mm is enough for the eyes.
A thin chain or twisted cord to hang a structure from, for example.
Four screws for the ring instead of the cap. It is for them that our lamp will be hung.

In addition, you need to stock up on a drill with drill bits for wood and tiles, pliers and a screwdriver.

Let's get started:

We process the planed board with sandpaper - first coarse, then finer.
We drill three holes where the cartridges will be located.
If noble types of wood are used, then the processing of the board ends there. If the wood is simpler, we cover it with stain and after drying, varnish it twice.
The nitro varnish only dries in the air for a couple of hours, so you won’t have to wait long.
Then comes the most dangerous step: we need to drill holes in the coffee cups and saucers without breaking them.
We use only and exclusively drill bits for glass and tiles. Great efforts are unacceptable; We drill slowly, without distortions. The key moment is when the tip of the drill goes through: pressing the drill a little harder at this moment will split the cup or saucer.

We attach wires to each cartridge. Until we fasten them to each other.
We screw the entire future lamp into a single whole. If our chucks use platforms with holes for screws, we pull them to the board directly through the holes in the saucer and cup.
If there is a hollow threaded tube and a nut at the end of the cartridge, we again pass them through the cup, saucer and board. A rubber gasket is placed between the metal and glass.
You can cut it yourself from an unnecessary bicycle or car tube; You can use a ready-made gasket of a suitable size from any plumbing repair kit.
We screw screws with rings into the back side of the board.
We connect the cartridges in parallel. You shouldn’t leave the twists wrapped in electrical tape: we’ll carefully even do the side of the lamp that no one will see. Use a block to connect the wires.

The block is fixed on the back side of the board in any way - a drop of glue or a screw. A piece of wire that will be connected to the wiring is clamped in it.
We attach chains or cords to the rings on the back side; their other end is attached to a hook in the ceiling. The wire runs along one of the chains. Light bulbs are screwed in.

Press the switch and enjoy.

As you understand, the shapes that wooden chandeliers can take are limited only by your imagination. Let's show a few more original designs.

Sailboat made from driftwood and TV packaging

This original lamp made from oddly shaped driftwood picked from the forest. The author kindly posted a photo of his creation online.

The structure, of course, is not a fire safety monument. However, remember that LED lamps are extremely economical and practically do not heat up. If so, the risk of fire is reduced to nothing.

Chandelier made of dry boards and rope

Here, two ready-made matte lampshades are used as light sources. The simplest and most inexpensive. Everything else is the author's improvisation.

What is most striking is not that the lamp was made by hand: as you can see, there is nothing structurally complex about it. It is surprising that the author of the work was able to see beauty in such a seemingly worthless thing as old board. And show this beauty to others.

Please note: in this design it is also worth using only and exclusively energy-saving or LED lamps.

Incandescent lamps, especially high-power ones, create a very real fire hazard.

Timber with pots

And such ceiling lamps are not mass produced. Looks very original. To drill the bottoms of pots, you also need to use only and exclusively tile drills. In addition, you should not use incandescent lamps here either. Even low-power ones.

Hollowed out log with soffits

Another fire inspector's nightmare come to life. However, here too the use of light sources with minimal heat generation reduces the risk of fire to nothing.

Despite the exaggerated and simple appearance of the lamp, it can hardly be called made in five minutes on the knee: it was probably difficult to hollow out the log inside.

Conclusion

If you liked the wooden ceiling lamps described and shown, great. Even better if you have your own, original ideas. As you can see, they can be the most unexpected. Good luck with your creativity!

Sections