How to set the time on the starline a91 key fob. How to correctly set the time on a Starline alarm key fob

home

Security systems

"Starline A93" is a car security complex with modern and convenient function remote start engine. Car alarm functions are configured using the Valet service button, which is mounted in the car interior, and a key fob with an LCD display and control buttons.

Setting the time on the key fob

To use all the functionality of the Starline A93 car alarm, you need to correctly set the time on the key fob. To do this, press button No. 4 until three signals are heard: one melodic and two short. At this moment, the clock icon will start flashing.

REFERENCE. After entering the function menu, the user needs to immediately begin setting the clock. If this is not done within 8 seconds, the key fob will automatically exit the function menu

The user sets the hours and minutes using buttons No. 2-3. After setting the hours, the transition to minutes is carried out using button No. 4.

Another light press on button No. 4 puts the key fob into alarm setting mode. The alarm clock is set according to the same principle as the current time. Exit the alarm clock setting mode using button No. 4. If there is no activity for 8 seconds, you will be logged out automatically.

Factory reset

To reset the settings to factory settings, you need to turn on the ignition and press the Valet button 9 times. The car will notify you that the alarm is in the mode of resetting all user settings with 9 siren signals.

To exit the reset mode, you need to turn off the ignition, or wait until the system exits automatically. The vehicle will emit three beeps to confirm exit.

Automatic engine start

Using the Starline A93 alarm system, you can program the following parameters:

starting the car engine on an alarm clock;
periodic autostart of the engine;
launch car engine by temperature.

It is not possible to start the engine automatically if the vehicle's ignition is turned on, the brake pedal is pressed, the hood is slightly open or the parking brake is applied, and on vehicles with a manual transmission the "soft neutral" procedure has not been performed.

Starting the engine on an alarm clock

When this function is activated, the car engine will automatically start at the specified time. To activate the function, perform the following steps:

the key fob cursor is moved to the icon with the image of a clock and button No. 1 is briefly pressed, after which the car emits one light signal, and the key fob emits one melodic sound;
the key fob display shows the time after which the engine will automatically start according to the alarm clock;
after 5 sec. The current time display on the key fob resumes.

The engine autostart function using an alarm clock is activated for one start cycle. The fact that the mode has been successfully enabled is indicated by active icons depicting a clock and a bell on the key fob display.

Periodic engine starting

The Starline A93 alarm system allows you to regularly start the car engine at regular intervals. The start period can be set from 2 hours to 24 hours with a minimum increment of 2 hours.

To activate the mode, you must:

place the key fob cursor on the icon with the image of an hourglass and briefly press button No. 1 - the car will respond with one light signal, and the key fob with one melodic sound;
the current value of the car engine autostart period will be displayed on the key fob display for 4 seconds (for example, “4H” means that the engine will start every 4 hours).

To change the engine autostart period, you need to lightly press button No. 1 until the display shows desired value. Each press of button No. 1 increases the automatic start period by 2 hours.

After the desired autorun period value is displayed on the display, press button No. 1 and hold it until a melodic trill sounds, or wait until the selected autorun period is automatically saved, which will occur 4 seconds after selecting the desired parameter. At the same time, two short melodic signals will sound on the key fob, and an icon with an hourglass will begin to appear on its display. A few seconds after setting the selected parameters, the engine will automatically start and warm up.

Engine start based on temperature

This feature monitors the outside air temperature and, if necessary, starts the car engine to warm up. The starting temperature is set within the range from -3 o C to -27 o C, the minimum step is 3 o C. The minimum period of time between repeated starts (excluding the time spent warming up the engine) is 60 minutes. Once the user activates the temperature-based engine start function, the number of temperature starts is not limited.

To enable engine autostart mode based on temperature, perform the following steps:

press the icon with the image of a key and button No. 1 - the car reacts with one light signal, and the key fob emits a melodic trill once;
over the next 4 sec. the key fob display shows the current value of the starting temperature;
to change the temperature value, you need to press button No. 1 (1 press = 3 o C);
after selecting the desired temperature parameters, hold down button No. 1 until a sound signal is heard, or wait for automatic saving, which occurs after 4 seconds.

If the engine autostart function based on temperature is successfully activated, the key fob emits two short melodic signals, and the icon with the image of a key on the key fob display becomes active.

How to register a key fob

You can register up to 4 key fobs in the memory of the Starline A93 car alarm remote control. To do this you need:

disable security mode;
press the Valet button seven times;
turn on the ignition - the car will emit seven siren signals;
briefly press buttons No. 1-2 - the car will emit one siren signal, and the key fob will emit one sound signal;
turn off the ignition - the car will respond with three light signals.

If there are several key fobs, then the second point is repeated for each of them. In this case, the interval between recording key fobs should not exceed 5 seconds.

IMPORTANT! When registering key fobs, all information about the previous key fobs is deleted from the system memory. Therefore, all new and old key fobs must be registered within one programming cycle

Setting the sensitivity of the shock sensor

The vehicle impact sensor is located in the transceiver. Its sensitivity is determined on a 14-point scale, where the value “01” corresponds to the minimum sensitivity, and the value “14” corresponds to the maximum. A value of "0" disables the selected shock sensor level.

Setting the sensitivity of the sensor warning level

To adjust the sensitivity of the shock sensor warning level, you must do the following:

disable security mode;
turn off the ignition;
press button No. 3 on the alarm key fob, first for a long time, until a sound signal is heard, and then once, while the car will emit three light signals and two beeps of the siren, and the key fob will make a melodious sound and an indication of the warning level of the shock sensor will appear on its display;
Short presses on buttons No. 2-3 select the required value of the sensor sensitivity level.

The factory setting for this parameter is 10.

Setting the sensitivity of the sensor alarm level

To adjust the sensitivity of the alarm level of the shock sensor, you need to press button No. 3 on the alarm key fob, first for a long time until a sound signal is heard, and then once - the car will respond with one light signal, and the key fob will make a melodic sound. After this, an indication of the alarm level of the shock sensor will appear on the display.

The factory value of the sensitivity of the alarm level of the signal sensor is 5. To correct this value, you need to use buttons No. 2 and No. 3. It should be taken into account that the sensitivity value of the alarm level of the shock sensor cannot be higher than the sensitivity value of the warning level.

To exit the mode of adjusting the sensitivity of the shock sensor, press button No. 3 first for a long time until a sound signal is heard, and then briefly. The car reacts with three light signals and two siren signals. The keychain makes a melodic sound.

Disabling the alarm

If the battery in the key fob is dead or the button is broken, the alarm can be turned off in an emergency way or using secret code.

Emergency shutdown of alarm without key fob

For emergency shutdown for the Starline A93 alarm system without a key fob, you need to use the Valet service button. They work like this:

open the door with the key - an alarm sounds;
turn on the ignition;
press the service button four times within 20 seconds;
turn off the ignition.

After this, the alarm system is turned off. You can start the car.

Emergency alarm shutdown using a secret code

To disable burglar alarm using your personal secret code, you need to do the following:

open the door with the key;
turn on the ignition;
within 20 seconds, press the Valet button the number of times corresponding to the first digit of the secret code;
turn off the ignition;
turn the ignition back on;
press the Valet button, but this time the number of presses must correspond to the second digit of the secret code;
turn off the ignition.

The car notifies you when the alarm is turned off. sound signals and flashing emergency lights.

The StarLine A91 security system belongs to the class of budget alarms. Despite this fact, it provides all the necessary functions to protect the car, and the anti-theft complex itself meets all current requirements. The data flow in Starline A91 passes through eight changing channels with a 128-bit encryption code.

In addition, the system provides an option for intelligent engine start. Thanks to such features, intercept the signal security system extremely difficult, because the alarm independently selects the frequency for communication between the key fob and the main unit in the car. This feature, in the city and higher level radio interference plays a key role.

How to start the engine from the remote control

As noted above, the StarLine A91 alarm system provides a remote engine starting function. But before setting up autorun, follow a few steps:

Move the gearshift knob to neutral (disengage all gears).
Turn the key in the ignition and remove it. The engine must be turned off.
Apply the handbrake.
Close all doors, trunk lid and hood well.

To successfully set up autorun, it is important to strictly follow the given algorithm. Otherwise, remote startup will not be possible. If the car is properly prepared (the engine is turned off by the Starline A91 alarm), it can be started from the key fob in various ways:

Press and hold the 1st button for three seconds. As soon as you hear the beep, press the 3rd key.
Set up periodic engine start from the remote control.

This option is especially relevant in winter, when it is necessary to warm up the engine from time to time. The StarLine A91 control panel is capable of automatically starting the engine and ensuring its warm-up, with the required frequency - once every two, three, four hours or once a day.

Setting up automatic start based on temperature and time

The peculiarity of the Starline A91 Dialog security system is the ease of setting up autorun. The latter can be adjusted so that the function will start the engine when the temperature drops to a certain level, or at a specific time period.

Enabling autostart based on temperature

To configure autostart based on temperature, take into account some conditions for the correct operation of this option - the installation location, the presence of a temperature sensor, and its serviceability. To activate the function, follow these steps:

For a long time, press the 3rd key (with the star icon).
Wait for the sound signal from the remote control to appear (the sound should be a single sound).
Look at the display - the icon located on the left side at the bottom of the display will blink.
Briefly press the 3rd button, then move through the menu to the thermometer icon (third from the left).

Once you are sure that the required function is set on the alarm, press the 1st button to activate the mode. If you need to turn it off, press the 2nd key on the key fob body. Now look at the display - in place of the clock, the motor temperature parameter should appear, at which the autostart will work.

After the temperature is displayed, you don’t need to do anything - after 8-10 seconds, the Starline A91 key fob will give a signal and a clock will appear on the screen. At the same time, the 3rd icon with a thermometer remains darkened. By appearance images, you can control the correct autorun settings based on temperature. If the icon is light, the function is disabled, and if it is dark, the option is activated.

Configuring autorun by time

To enable this option on the StarLine A91 alarm system, select the 2nd icon on the display. At the same time, the car’s headlights should blink once, and the security system key fob should give a signal in the form of a melody. This completes the timed autorun setup. The system will independently give a command to start the engine at a certain time.

If the car does not start on the first try, a second attempt is made. In this case, the starter operating time is automatically extended by 0.2 seconds. The device timer includes four attempts to start the engine. If all of them are used up, but the engine still does not start, a sound signal will sound on the Starline A91 remote control.

To configure autorun by time, take the following steps:

If the above manipulations are done correctly, then the autorun setup is complete. Now the StarLine A91 alarm system will issue a command to start the engine at a certain interval.

Disabling the option is carried out using a similar algorithm. The only thing is that confirmation of the choice is made using the 2nd button, which shows open lock. If the engine started successfully, an icon depicting exhaust gases appears on the display. The car's headlights should flash three times and the horn sound three times.

Why autorun does not work - the main reasons

During the operation of the car, situations are possible when the Starline A91 autostart does not work from the key fob. The reason for this phenomenon, as a rule, is not associated with the failure of one of the parts, but with errors in operation or configuration. If the automatic start fails, problems may arise with setting up the vehicle software.

The main signs of failure include:

The car doors cannot be closed using the key fob. Here it is better to contact the specialists at the service station. To eliminate the malfunction, it is necessary to check and calculate the location of the break in the chain between the main unit and the door, the compliance of the actuator wires with the declared technical requirements, as well as the correct setting of the door closing impulse.
Commands from the StarLine A91 key fob do not receive a response from the main unit installed in the car. Such a malfunction can usually be explained by a low battery or stuck control keys. The solution to the problem is to completely replace the remote control and register it in the alarm system.
The shock sensor does not work. Here the right decision is its reconfiguration.
Autostart of Starline A91 is not activated. A common cause is faulty wiring that can become damaged. In addition, the cause of the breakdown may be an incorrectly installed immobilizer bypass (most often an antenna). Also check that autorun is configured correctly.
The alarm is activated excessively. There are two possible reasons for this - over-sensitivity of the sensor or the appearance of rust on the limit switches.
The car siren does not work. There may be several reasons - the siren itself has failed, or the car’s wiring has been damaged. To eliminate the breakdown, it may be necessary to replace the signal source or repair the vehicle wiring.

Video: Setup autostart Starline A91, by temperature (by timer, by alarm)

Liberal legislation aimed at protecting the rights of car thieves does not allow the car owner to use such effective means in the fight against this evil, like bear traps, electricity and explosives.

Therefore, every car enthusiast cannot do without installing an electronic security system on his movable property. There are a huge number of models of such devices, for proper operation which require not only professional installation, but also correct configuration during operation vehicle.

All radio technical parameters of the device are clearly recorded during the manufacturing of the alarm control elements and cannot be changed, but such user settings as the exact time setting must be set correctly.

How to set the time on the Starline A91 key fob will be discussed in detail in the article, but first you need to figure out why you need to carry out such actions.

Why do you need to set the time on the key fob?

A modern car is not a luxury, but a means of transportation that can be controlled from a distance. Setting the Starline key fob time is necessary, first of all, in order to correctly set the moment for automatic engine start.

Despite the fact that there is no need to warm up the engine to start driving, due to the presence of minimal thermal clearances in the engines of modern cars, winter time This feature will be very useful. In order to pre-program the car for certain actions, you will need to perform a simple setup of the security alarm pager.

Setting the time: step-by-step instructions

In order to set the time on the Starline A91 key fob correctly, you must follow the following instructions step by step:

1. Button number 3 (star drawn) is held until 3 beeps sound. After completing the steps described above, the clock icon will start blinking. Now you can set the time using buttons 1 and 2. Button 1 increases the number of hours, and using button 2 the time value decreases accordingly.

2. After setting the clock, briefly press button 3 and set the minutes. By analogy with adjusting the clock, minutes are set by pressing buttons 1 and 2.

3. At the next stage, the alarm clock is adjusted. For this purpose, briefly press button 3. After the icon starts flashing, the indications for this mode can also be set by pressing buttons 1 and 2.

As you can see, there is nothing complicated in adjusting the time on the Starline A91 key fob, but when making settings you should be very careful not to confuse the modes. Flashing the corresponding icon on the display helps to configure the key fob correctly.

Reasons for frequent alarm settings being lost

If time adjustment has to be done quite often, then it is necessary to determine the cause of unstable operation electronic system. The most common reasons for the temporary settings on the Starline A91 key fob being lost:

Low battery charge.
Lack of reliable contact between the battery and the terminals of the device.
Factory defect or malfunction software devices.

In the first case, the problem of frequently changing time settings is solved by replacing the battery. To carry out this operation, it is enough to disassemble the key fob, remove the dead battery and install a new battery.

The new battery must be completely identical to the element being replaced in terms of size and current ratings. If it is possible to purchase a more expensive battery, then this must be done. When using a high-quality battery, the frequency of replacement will be significantly reduced.

If the unstable operation of the key fob is caused by bending or destruction of the contacts, then this problem can also be solved on our own. In the first case, it is enough to straighten the elastic contacts to increase their pressure on the contact part of the battery. If the contact is broken, then this part can be soldered using a low-power soldering iron with a thin tip.

A key fob malfunction caused by a manufacturing defect must be corrected at the manufacturer's expense. If the functionality of the device is impaired due to the fault of the motorist, then repair or replacement of the device is carried out at personal expense.

If malfunctions occur that cannot be eliminated with your own hands, you should contact specialized workshops, where professionals will determine the exact cause of the device’s inoperability and repair it. high-quality repairs or replacing the key fob auto Alarm Starline A91.

P.S. How to set the time on the Starline A91 key fob is described in the article. If the device has a high-quality battery, then this procedure will rarely be necessary. Over time, the sequence of actions is forgotten, so it is recommended to bookmark this article in your browser for quick search if necessary.

The Starline alarm key fob displays not only useful system information, but also the time, which can be manually adjusted.

Most key fobs car alarm, which have a screen, can also display the time. This is not only practical in terms of controlling your schedule and time awareness, but also convenient when implementing additional features automatic start. Starline does not lag behind its competitors and also uses the watch function in its arsenal. Setting them up is not difficult; you need to know the main principles of controlling the alarm key fob.

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline!

Despite the fact that Starline has simplified the time setting procedure to the maximum, some issues related to unsuccessful installation attempts continue to arise.

Possible reasons for time settings failure

If you find that your Starline key fob no longer displays the time correctly, then you should check the condition of the battery. This is quite easy to do, thanks to the built-in low battery indicator function. If the battery loses the necessary quality work energy, a corresponding picture appears on the display, accompanied by a sound signal. And although this reason is extremely rare, especially for Starline, check any possible options necessary.

The second reason could be changing the battery. After installing a new battery, the time is automatically reset.

Be careful, replacing the battery inevitably entails resetting the anti-burglary protection, so the first thing you should do is not set a new indicator, but set the car to the Starline alarm system.

Another reason is incorrectly adjusted clock indicators or incorrect procedure for setting.

Debugg

Regardless of the conditions that caused the crash or reset, you will have to restore the watch. This can be done in two ways:

Classic. The time is set using service commands on the alarm key fob;
Radical. Replace the battery at zero hours zero minutes. The temporary values will be reset to zero and the countdown will begin from the specified point.

Setting new indicators on the Starline alarm display has general principles for most models. They are carried out using a specific algorithm of actions, which can be divided into three types, depending on the generation of the Starline alarm and some of its features.

Making settings for series E, D, B

Starline car alarms are marked , D and allow you to set the time period by performing the following actions:

Press the fourth button on the control panel and hold it until three signals count down - one long and two short. After this, 4 menu functions will appear on the screen. Select the one you are looking for by pressing the fourth key again. You can set the date and time using the first function. It is designated F-1. After this, hold down the fourth button again, wait for two signals and start setting the time using the first two service keys.

Making settings for the A series

Setting the necessary parameters on the Starline Series A alarm system depends on the model number.

And it provides for the presence of four service keys, which determine the features of the commands produced.

You can set the time parameters on these devices by long pressing the fourth key. After three consecutive beeps, the hour digits will flash, and changing the values will be possible using the second and third keys. To set the minutes, press the fourth button again and repeat the steps described.

And they have a simplified appearance and are content with the presence of three service buttons.

To carry out this procedure on the key fobs of these models, you will need to press and hold the third button with the image of an asterisk until three characteristic signals occur. After this, you can adjust the hours and minutes. The opening and closing keys of the lock allow you to decrease or increase the numbers, and the asterisk button allows you to move between hours and minutes.

What happens if you don't configure it?

The least that can happen in this case is that you will lose additional information. More than that, such autorun parameters as starting by alarm clock, by a specified interval or by timer, for models a91 and b9, will be lost.

The consequences of this may be an unheated engine and increased collection time, failure of the starter due to high loads during standard starting in the cold season, as well as the need to replace the battery when the vehicle is not used for a long time at low temperatures.

The Starline A91 alarm system is in deserved demand among consumers. It operates at an impressive distance, is able to ignore radio interference, and is simple and reliable to operate. Before using this handy anti-theft tool, you need to understand its basic features and functions.

Setting the time on the key fob

To set the time on the key fob, you need to press and hold button No. 3 with the image of a snowflake until sound signals follow:

one melodic;
one short;
two more short ones.

Sound signals notify the user that the key fob is ready to adjust the time.

Current time. First, set the “clock” field, which flashes on the display. Each press on button No. 1 with the image of a closed lock increases the time by one hour, and each press on button No. 2 with the image open lock reduces it.

When the “hours” field is filled in, proceed to setting the “minutes” field. To do this, briefly press button No. 3 (snowflake) - the “minutes” field begins to blink. Again, use button No. 1 (lock) to increase the time by one minute, and use button No. 2 (open lock) to decrease it.

Alarm. After the minutes are set, press button No. 3 (snowflake) and proceed to setting the alarm clock. When the “alarm clock” field flashes, use button No. 1 to increase the time again, and use button No. 2 to decrease it, if necessary.

The next short press on button No. 3 (snowflake) allows you to turn the alarm on or off. Button No. 1 (lock) turns on the alarm, button No. 2 (open lock) turns it off.

Timer. If you press button No. 3 (snowflake) again, a field for setting the timer will appear on the display. Just like the clock and alarm clock, the timer is set using buttons No. 1 and No. 2.

By pressing button No. 3 again, you can switch to the mode of enabling or disabling the timer. Button No. 1 (lock) turns on the timer, button No. 2 (open lock) turns it off.

Autorun programming

The Starline A91 alarm system allows you to program engine auto-start based on temperature, timer or alarm clock.

Autostart based on engine temperature

Press button No. 3 (snowflake) on the key fob and hold it until you hear first one melodic and then one short signal. Then, also pressing the third button, move the cursor along the icons located at the bottom of the display until it stops at the icon with the image of a thermometer. Press button No. 1 (lock) – a melodic signal sounds. The system is activated. As soon as the temperature drops below the programmed value, the engine will start to warm up.

In order to disable this function, you need to press button No. 3 (snowflake) again and hold it until the second sound (melodic sound, then a single signal). After that, using the same third button, move the cursor to the thermometer icon and press button No. 2 (open lock). The key fob notifies the user with a melodious signal that the function has been disabled.

Autorun by timer

To activate the engine autostart function using a timer every 2, 3, 4 or 24 hours, do the following. Press button No. 3 (snowflake) and hold it until you hear first one melodic and then one short signal. Then, using the same third button, move the cursor along the icons located at the bottom of the display until it stops at the icon with the image of a fan. Press button No. 1 (lock) – a melodic signal sounds. The system is activated.

To disable the autorun function by timer, you need to press button No. 3 (snowflake) and hold it until the second sound (melodic sound, then a single signal). Then, using button No. 3 (snowflake), move the cursor to the fan icon and press button No. 2 (open lock). A melodic signal from the key fob will notify the user that the auto-start function by timer is deactivated.

Auto start on alarm clock

First, you need to make sure that the clock on the key fob is set correctly and the alarm is set at the right time.

To activate the engine auto-start function on an alarm clock, you need to press and hold button No. 3 (star) until the remote control emits three beeps and the corresponding icon appears on the display. The display will show set time alarm, which will then change to the current time. The LED indicator will flash in a series of two flashes.

To turn off the auto-start function on an alarm clock, you need to place the cursor on the icon again and press button No. 2 on the key fob (open lock). After two flashes of size and a melodic signal, the icons will disappear. This function is activated for one startup cycle. To start the engine next time with an alarm, you will need to activate this function again from the key fob.

Setting the sensitivity of the shock sensor

To adjust the sensitivity of the shock sensor of the Starline A91 system, you need to perform the following steps:

disconnect the battery terminals (as an alternative, remove the fuse that controls the interior lighting);
find the location where the shock sensor is attached (as a rule, it is located under the front panel, in the area of the steering column and pedals);
disable the security mode, switch to programming mode and use the buttons on the remote control to make the necessary changes.

The sensitivity level has 10 values (0 – minimum, 10 – maximum). Factory settings assume 4-5 levels of protection. When adjusting the alarm sensitivity, you need to take into account the vehicle load level. The operation of the alarm should be considered correct if there are no false alarms.

After setting up the system, you need to wait 2-3 minutes, and then turn the alarm on and off several times to ensure its stable operation.

How to “register” a keychain

If you have lost your key fob or it has broken down, don’t worry, you can purchase a similar original or compatible device in auto stores. The new key fob must be “registered” in the system. To do this you need:

turn off the car ignition;
Press the programming button (Valet) seven times;
turn on the car ignition;
listen to 7 sound signals that warn that the user has activated the key fob recording mode;
pick up new keychain, simultaneously press and hold buttons No. 2 (open lock) and No. 3 (snowflake);
After the siren sounds once, the buttons can be released.

The new key fob is “registered”.

To exit the “registration” mode for new key fobs, you need to turn off the car’s ignition. The parking lights will flash 5 times to confirm.

How to turn off the alarm without a key fob

The skills to turn off an alarm without a key fob will come in handy if the remote control is faulty or its battery is dead. To deactivate the system, there is a programming button (Valet), located in an inconspicuous but accessible place in the cabin.

Deactivation without a key fob: if the personal code has not been set:

We open the car door with the key, and the alarm signals are turned off. If the key fob was not used to activate the alarm, the turn signals will flash 4 times.
Turn on the ignition for 20 seconds and press the service button three times.
The ignition turns off. The siren sounds twice. Security mode is disabled. You can start the car.

Deactivation without a key fob: if a personal code has been set:

Open the car door with the key. The alarms sound and the turn signals flash 4 times.
Turn on the ignition and press the service button a number of times identical to the number of the set personal code.
The ignition turns off. The turn indicators flash 2 times. If the personal code had one digit, the security mode is disabled. You can start the car.

If the personal code had 2 or 3 digits, the user should carry out the second and third deactivation in the same order.

Factory reset

To reset the Starline A91 alarm settings, use the following algorithm:

turn on the ignition and press the service button located in the car 10 times in a row;
turn off the ignition, and the siren will emit 10 short signals, notifying the user that he has switched the alarm to reset mode;
press the service button once, after which one siren signal sounds;
press button No. 1 (lock) on the key fob, after which the system notifies with a short single signal that the factory settings have been reset;
To exit the reset mode, turn on the ignition or wait until the system automatically exits this mode. As confirmation, the side lights flash five times and the key fob emits a melodic signal.

All. The alarm has been reset to factory settings.

Thus, the Starline A91 alarm system can perform automatic functions, or it can perform mechanical functions, configured by pressing buttons. A significant part of its functions are changed by programming. Therefore, by customizing the system you can create a convenient and reliable anti-theft system, which will serve you for a long time and without failure.

Sections