How to make a stork with your own hands for the garden: a master class on making a garden figure. Stork from plastic bottles master class What you can use to make a stork with your own hands

A decorative stork made of plywood with your own hands will decorate any local area. Children's playgrounds and summer cottages look a bit boring without any kind of decoration. A well-groomed flowerbed will attract attention and please the eye even more if you complement it with a fake bird, shown in the photo. There are many variations in production artificial birds, made from all sorts of available materials, which sometimes you can’t even imagine in the form of crafts.

Some animals require special skills and abilities and take up a lot of precious time, so it is better to take on work that is sure to be productive without painstaking efforts. One of these creations is a stork made from plywood by hand.

Why the stork? The answer is quite reasoned. Even small child it is known that this noble bird personifies peace, tranquility, family well-being, fidelity, and constancy. Many beliefs and signs are associated with the location of the stork’s nest, their annual return and offspring.

Where to start making decor

It has been proven and tested in practice that all ingenious inventions are simple and accessible to everyone. This simple composition is acceptable in terms of material costs and complexity for people seeking to embellish and ennoble not only their territory, but also the surrounding space.

You will have to work with plywood. Quite suitable material for those who are trying to master the lessons carpentry. The material is easy to cut, although quite strong and dense. It can be processed without grinder, by using sandpaper. After covering with several layers of drying oil or varnish, it is not at all susceptible to swelling, delamination, or cracking due to external influences of precipitation and temperature changes.

Garden plywood storks are made from medium grades and thickness wood board. Eliminate exposure to factors external environment It’s absolutely impossible, but looking for the most expensive and high-quality plywood for outdoor display is an unwise decision. Therefore, it is pointless to describe the characteristics of the material in detail. Whatever they get, a superb creature from the feathered family will be molded from there.

You need to start by roughly imagining actual size birds to know the specific parameters of consumables. There are plywood sheets different sizes, but there is no need to cut out a two-meter bird. If a stork settles in the front garden, then a small bird will fit into this space, perhaps more than one. And if you attach it to the gable of the house, clear example in the photo, it is advisable to make a larger-scale decor so that it is visible from afar and does not get lost.

How can such beauty be lost, even if the color scheme is simple and at the same time bright? Looking ahead a little, we will have to stipulate that the color of the finished stork, cut and assembled with your own hands, includes only three colors: gray, red, black.

Based on the description of the stork for the dacha or garden, you can already make an estimate of materials for its production:

• plywood sheet;
• paper or finished sketch;
• pencil, scissors;
• jigsaw;
• paint with brush;
• ship varnish.

Work sequence

You can cut a stork from plywood in a matter of hours. Sleight of hand and imagination will speed up the process without hindrance. The first step is to draw it. Everyone imagines what a stork looks like, but not everyone will be able to portray it.

The plywood stork drawings in the photo make the first step easier. All that remains is to project them onto a large paper format. As can be seen in the proposed sketch, a pattern, compass and other technical tools are not useful. Anyone can draw two ovals and connect them with smooth lines. Try to depict a bird with a long neck, beak and wings in such a way that the silhouette resembles a representative of the stork order. The better the proportions are maintained relative to the template, the greater the chances of getting something similar to the source.

Next, the drawn silhouette must be cut out. The plywood stork stencil is ready. Even a schoolchild can do all the stages of creating a symbol of devotion and good luck, so the participation of children will not hurt. The paper stork must be placed on a plywood sheet and lightly attached with buttons, a stapler, or tape, whatever comes handy. Trace the outlines with a pencil. The lines must be clear so that when cutting, all the smooth curves of the body and the sharp angles of the beak, tail and wings are preserved. Now you can start cutting. At this stage, there is no need to rush and put strong pressure on the jigsaw. You need to work slowly.

The plywood stork template will be completely ready after careful sanding on all sides. The first sanding is done with coarse sandpaper, after which it is necessary to go through fine-grained sandpaper a couple of times, including cuts. When the surface becomes smooth, without burrs, the most beautiful stage of creating a creation with your own hands begins: assembling all the parts into a single product.

Screwing the legs and gluing the wings is quick and easy. If the stork takes up residence in the garden, it must be placed on a base. Take a small one wooden block, drill holes in it, generously coat them with wood glue and insert the legs. It will take a little time for the wings and support to dry. It is advisable to press it with a clamp and fix the wings with the body.

After which it’s time to paint the bird. The most popular and suitable paint is acrylic. The color pattern is shown in the photo: the beak and legs are red (can be dark orange), the body is light gray, the plumage of the tips of the wings and tail is black, the eyes are marked with small black circles. Apply varnish when the paint is dry.

That's the whole procedure! A video with a lesson on how to make a magic bird is attached.

Arrangement of crafts

It’s not enough to make a stork out of plywood. Regardless of the location of the plywood stork, you still need to make a nest for it. It will even resemble the real thing, because it will have to be built from thin branches. On a horizontal surface, the nest should become like a stork's. Just as wide and deep. On the roof gable, the nest can also be imitated. Make it voluminous so that the composition looks complete.

If desired, the stork is given a pair. Then he is not alone. “Producing” miracle birds is inexpensive, so after several training sculptures, you can take on more complex and labor-intensive designs.

A well-groomed and attractive garden will always please the eye. To make your garden more cozy, you can decorate it with various hand-made ones. Today we will talk about how to make a stork for the garden and what materials can be used for this.

Let's start with the simplest thing - PET bottles.

Option #1. Making a stork from plastic bottles

Before you start working, you need to take a small sheet of plywood and make templates from it. Templates need to be made in the form of the body and wings of a bird, as shown in the image. You will also need opaque plastic bottles (preferably white or black), red electrical tape and self-tapping screws. The procedure is as follows.

Step 1. First, you need to connect the previously made templates with each other using self-tapping screws. Plastic milk bottles will be used as feathers. The bottles should be cut into strips of equal width, and then a fringe should be made on the edges of each of them.

Step 2. Next, the finished feathers must be secured to the “body” of the stork using glue gun. It is typical that black PET bottles will be used for the lower body and tail (usually shampoo containers are used for this).

Step 3. The beak should be wrapped with red insulating tape.

Step 4. To make the legs, ordinary wire is used. Eyes for the bird can be purchased at any craft store. That's it, the stork is ready with your own hands!

Option #2. Making a stork from polyurethane foam

Now let's talk about another option for making a stork for the garden with your own hands. Now you need to pre-prepare plastic container for 5 liters, polyurethane foam, polystyrene foam and tape. The algorithm of actions should be as follows.

Step 1. First, the body parts are attached to the bottle using a container. For the neck, ordinary wire is used, lined with pieces of foam. The thighs need to be made in a similar way (using foam and wire). An ordinary large-diameter nail is quite suitable as a key.

Step 2. The workpiece will look at the preliminary stage as shown in the image below.

Step 3. For the bird's legs (at least in this implementation) used electrodes are used. In the absence of electrodes, you can select a similar material - for example, thick wire twisted into several turns, or metal rods from thin reinforcement.

Step 4. So, all parts of the stork’s “body” have been assembled, but before proceeding to the next step, you need to carefully check the strength and reliability of the fasteners.

Step 5. After this, the entire layout must be covered with polyurethane foam.

Step 6. All excess is carefully trimmed off.

Step 7 Now the sculpture is almost ready. If the polyurethane foam has already completely dried, then the bird needs to be painted acrylic paint.

Step 9 Natural feathers are inserted into the wings and tail to make the stork look as realistic as possible. Look what a wonderful garden stork you will make (if you do everything right, of course).

Option #3. Making a stork for the garden from a canister

Before you begin, make sure you have the following: Supplies:

· five liter canisters;

· plastic bottles(black and white);

· plastic tubes;

· thick wire;

· foam plastic;

After this, you need to perform the following sequence of actions.

Step 1. Cut out the foam blanks and use a knife to shape the head. Cut out the eye sockets and make the beak flatter.

Step 2. Use sandpaper to make the surface as smooth as possible. Place toy eyes in the eye sockets (we’ve already talked about where you can get them).

Step 3. Cut a beak from a plastic bottle and secure it with glue.

Step 4. Make a bird's body from a plastic canister and cut off the handle.

Step 5. Cut a piece of mesh large enough to wrap around the canister. Round the mesh a little so that it looks more like wings.

Step 6. A thick metal rod must be bent and legs made from it.

Step 7 Feathers for the stork are cut from white bottles.

Step 8 After this, you can proceed directly to assembling all the elements. Work should start from the “tail”.

Step 9 For the “neck”, a corrugation (for example, from a vacuum cleaner) or something similar is put on the wire. The feathers are attached using self-tapping screws. Due to the fact that our bird’s wings are folded, feathers can only be attached to the belly and slightly on the sides.

Step 10 White bottles are cut in half, and a fringe is formed at the cut sites. The bottles are attached to the “neck” using tape.

Step 11“Wings” must be made from one edge of the prepared mesh. It is important that the second row covers the first by 1/3. On the third row, white plastic is used.

Step 12 For the “legs” of the stork, corresponding blanks are cut out from 0.5-liter bottles.

Step 13 All that remains is to paint the bird’s “beak” and “legs” red. That's it, your DIY garden stork is ready!

For a more detailed introduction to this manufacturing method, we recommend watching the thematic video material.

Video – DIY stork

Have you ever imagined, dear readers, that it could be used as...a material for making art objects. Although it may not be art as such, in its literal sense, it is quite possible to make a decoration for the garden - a small sculpture. In fact, polyurethane foam is unusually plastic, hardens quickly and is easy to process - why not a material for creativity?

Today I will tell you how to make polyurethane foam stork sculpture to decorate your garden or summer cottage. You need very few materials, and they are very cheap. If you pay attention to how much they cost garden sculptures in hardware stores, you will understand that the price of a pair of foam cylinders is not commensurate with their cost. Besides, our stork will turn out much better. So let's get started.

Stork frame

To begin with, we will select a suitable body for the stork - a frame on which the foam will be sprayed. Plastic canister from under water with a capacity of 5 liters is perfect. We make the stork’s neck from wire, and to add volume, you can attach strips of foam plastic to the wire. The stork's legs can also be made from wire, and the nose and head can be cut out either from foam plastic or wood - whichever is more convenient and preferable.

Making a sculpture

After production simple frame Let's start spraying foam on our sculpture - we do it carefully, imagining the contours of the finished stork. To make it easier, print out a large bird. If the foam does not lie as you intended, no problem - after drying, the excess can be easily removed with a knife. By the way, if you wish, you can use real bird feathers for the tail - who knows, maybe you will make a peacock instead of a stork. After the foam has dried and been fine-tuned with a knife, paint the sculpture with regular acrylic paint, fix it in place in the garden, and invite your friends to appreciate your creative genius. Good luck!

An ancient legend says that God gathered all the reptiles from the Garden of Eden into one bag and ordered the man to throw it into the sea with his own hands. And the curious Homo sapiens wanted to look at the creatures, untied the bag, and, of course, let them all go. The Lord became angry and turned this man into a stork so that he would protect other people from all kinds of toads and snakes. Since then, storks always settle near humans, feed on reptiles and bring us happiness.

On many old pictures depicts a stork with a baby. Among the Slavic peoples, it is generally accepted that this bird is responsible for childbirth and well-being. If storks have settled on the roof, the house will be full of happiness and children's laughter. And if you haven’t settled yet, then a wonderful stork with a baby can be made with your own hands from scrap material and installed on a ridge or on an apple tree in the center of the garden.

Happiness from bottles

Will need

To make a stork from plastic bottles for the garden, we need to prepare the following materials:

• empty bottles;
• thick wide board for the base;
• rod or thick wire for legs;
• a piece of foam plastic 10 cm thick;
• corrugated hose from a vacuum cleaner;
• 2 plastic canisters with a volume of 5 l;
• metal mesh for wings;
• stapler

Master class on making happiness

In order for almost real storks to appear on the paths of your garden, you will only need a few hours of passionate DIY work.

• Cut out a head with a beak from a piece of foam plastic, draw eyes or glue in black beads with your own hands.

• Cut a beak out of a dark bottle in two parts and glue it in place.

• We begin the master class on making a body by cutting off the handle in the canister. Then you need to bend the mesh with your own hands to the shape of the canister and trim off the excess.

• To make the legs, bend the rod and secure its ends to the board.

• We are conducting a master class on making plastic feathers.

• Attach the feathers to the canister, starting from the tail.

• The master class on attaching a neck begins with attaching the reinforcement wire. Then a hose is put on it.

• Attach small “feathers” to the neck with tape.

• Secure the feathers to the mesh.

• The stork for our garden will stand with its wings folded, so we simply attach all the feathers with a stapler with our own hands, overlapping each previous row by a third.

• We finish the master class by connecting all the details and decorative tinting of the eyes, beak and legs. You can install this bird with your own hands in the depths of the garden for the whole summer. It will not be damaged by rain and will not fly away.

Fashionable toys today, hand-sewn from ordinary fabric using simple patterns. We will not fully describe the master class on their manufacture.

• Cut out the details of the craft from fabric, sew and stuff with any filling.

• Separately, you need to make a beak (can be made of cardboard) and attach it to the head. All that remains is to make the clothes, glue the eyes, wrap the baby and hand it to the stork.

Of course, such a wet bird cannot be placed on the branches of a garden, but flower pot She can decorate the windowsill.

Another way to make your home rich and happy is to make a stork on the nest. You can use tilde bird patterns as a basis. Cut feathers from white plastic milk bottles, staple them together and make wings, decorating the ends with real feathers. Place a few white feathers on the top of your head. Form a tail out of real feathers, sew or glue on eyes and a tie, and place the bird in the nest.

It can be made from ordinary rods, fastened with wire. To make a stork with a baby, put any doll in its wings. The master class on making a lucky amulet is over.

These two rag birds cannot be left on the garden paths, and a master class on making the first stork requires a lot of time and materials. Don’t be upset and just build a nest and cut out a flat bird from PCB or plywood. Color it, put a string bag with a baby in its beak and that’s it, the stork and the baby have already settled on your roof.

Almost every person has heard that storks bring children. Yes, that's not true. But only if we consider direct meaning this sign. But legends are not born just like that, without some kind of justification, right? And it’s not just that you can often find children near maternity hospitals, on the territory of children’s institutions and on active play areas.

And is this only where the mysterious power of the beautiful bird lies? What else can a stork figurine bring to the owner’s home and why is it believed that a stork sculpture is great gift for everyone to whom the donor wishes goodness and prosperity?

Symbolism of a bird and a stork figurine

Storks are indeed associated with a huge number of beliefs and legends that have come to us since ancient times. In ancient times, people believed in this majestic bird, considered it sacred and endowed it with enormous magical power. Even then, during the times of hunting for food, killing a stork or causing any harm was considered very bad omen, because such an attitude towards the “deity” entailed misfortunes and even death of the culprit or members of his family, and for the rest of the people it led to problems with the harvest associated with hurricanes, floods, and drought. That is why, from time immemorial, residents of many countries protected storks, rescued them, helped build nests and waited for their return every spring.

By the way, the stork was not immediately called a stork, and there is no authentic version of how exactly and why the bird got its name. In the Old Russian, Slavic, Sanskrit, and German languages ​​there are indeed consonant words, but that is why it is so difficult to establish the truth. Today, the most plausible version is that the name “stork” comes from the German magpie “Heister”, and the word first sounded like “geister” and much later became what we hear now. And, again, in different regions countries of the post-Soviet space, you can hear other names for the same bird: busel, blackgut, leleka, busko, bociun, toad-eater, etc.

Pagan beliefs show that people in ancient times firmly believed that the white stork carried the souls of people who later “turned” into newborns. This is probably where the proverb came from that storks bring babies, but not in a literal sense, but only play the role of a mediator between God and people, helping souls come to earth.

They say that the first stork figurines were created in order to protect from evil spirits and evil spirits, from bad weather and lightning striking the house. Besides, in different countries they were considered assistants to the gods: in Rome - Juno (motherhood), in Greece - Hera (nurse), in Germany - Holda (awakening of nature), in the Baltics - Potrimpos (spring), etc.

And, of course, the stork sculpture symbolizes the love of children for their parents. In ancient times, the Romans and Greeks were confident that grown-up stork babies took care of their elderly parents and provided them with food. Then even the “Stork Law” appeared, which prescribed care for parents until the end of their days.

These birds are the key family happiness, because they always break into pairs, take turns incubating eggs and taking care of the babies together, and after a forced flight for the winter, they return to their nests. To this day, storks are the only birds that never leave their family, because even after the chicks become adults, they try to stay somewhere nearby.

Why are garden figures of storks so popular in Ukraine?

If we turn again to the legends, we can recall the legend that tells how storks brought bunches of grapes to the Cossacks in the Tatar prison so that they would not die of hunger. And yes, this is what saved the Ukrainians, who were subsequently freed from captivity. Legends from Moldova, where the stork became a symbol of viticulture, speak of a similar case in the distant past.

It is difficult to say whether this is actually true or fiction. But it is a fact that they enjoy great love not only in Ukraine, but also in neighboring countries. Such garden decor more and more often you can see not only near some institutions, but also in courtyards own houses, in dachas, in cities and remote villages. A well-groomed and interestingly designed area always helps to create a cozy, comfortable and peaceful environment, and if it is also a bird that brings happiness and joy to the owner, if it is beautiful and gives the area a special chic and individuality...

Moreover, unlike most garden figures made of polymer, each future owner he decides how best to install the statue: on the ground or on the roof of the house, buy storks in a nest for the garden or make one with your own hands, choose a single bird, a pair, a family of storks, or if you prefer a traditional stork with a baby. Here, as they say, to each his own, and you can give free rein to your imagination, solving not only the aesthetic problems of the house’s exterior, but also, perhaps, realizing your personal dreams and desires in reality.

Where can I install the stork figure?

Can be installed anywhere and will look great everywhere. The ideal option is lawns and flower beds, especially if you have a stork with a child. A figurine of a stork with a baby can also be installed in a nest on the roof of a house or a tree, if it holds a bundle in its beak and stands on straight legs, because in a sitting position the bird simply will not be visible.

Doubles garden storks They can also be either in a nest on a hill or on the ground. But where there are several of them, for example, a whole family of parents and children, you can only place them on the ground, since the roof of a house “strewn” with a large number of large birds will look a little ridiculous.

Now a few words about how you can install a decorative stork and where it is better to place the nest if it is to be used. In nature, storks can build their nests not only at high elevations, but also on stumps, even in thickets on the ground. Therefore, if you decide, for example, to cut down an old tree, then you can leave a stump slightly taller than the average height of a person and install it there. This material is light enough to be installed “in all winds” with reliable fastening and at the same time not subject to negative influences. natural factors such as snow, rain or changes in air temperature.

If you don’t want to raise it somewhere at all, then you can choose a place for it on the surface of the earth, but in order to give it some naturalness, it is advisable to choose slightly shaded places and place it next to bushes or lush green vegetation.

And, of course, they can also be used for home decoration if installed on the roof or nearby standing pillar. They always look amazing, and from afar it will seem like they are actually alive.

How to make a decorative nest for a stork

This interesting and very simple piece of garden decor is quite simple to make and does not require any special skills. Yes, if you want to make something truly beautiful and reliable, you will have to spend a little time, especially if you want to give it the most natural look. But it's worth it. And, of course, it will look much more interesting than a ready-made composition of a stork in a nest, bought in a store, because “live” branches will be used here, and a few drops of light gray paint on the nest itself will help to add even more naturalness. The work involves collecting, cutting and laying out the branches, but once the process begins, such a pastime will give a lot of pleasure and allow creativity to emerge.

For the base, you can take any light trough, basin or other container, which will later be decorated with twigs. It is advisable not to take old tree branches, because during the installation process they will break or will have to be screwed in with self-tapping screws. If you take something younger and more flexible, it will be much easier to work, and such branches can simply be tied together, sometimes making attachments to the base.

In addition, you can buy a ready-made one and wind the vine onto it, giving completeness and naturalness. What is convenient about this option? The fact that this base initially contains rings into which the standing legs are attached. This perfect option for placing a stork's nest on a roof or other elevation, because it is reliable and ergonomic, and you can also strengthen the fastening if you not just insert the metal leg into the ring, but also weld it.

Now let’s talk about where you can place a decorative nest for a stork and how to fasten it so that the structure is preserved for a long time.

• Roofs. Almost any is suitable gable roofs houses, garages, extensions, gazebos, on which a durable platform is installed (X-shaped plates connected by a board). The structure can be secured to the rafters using self-tapping screws or nails. Flat roof You shouldn’t even consider it, because the nest won’t be visible, but if the goal is exclusively a stork figurine, then you can try.
• Tall stumps, trees. This is exactly the case when you don’t have to completely cut down an old tree, but use it as a stunning decoration for the garden, making it the main focus of the entire design of the site. Here the garden figure of a stork in a nest will look simply magnificent and will become the best decoration. Also, here you can place a standing garden figurine, if you attach the metal leg of a stork to a tree with staples or any other method.
• Pipe, chimney. Decorative storks will look great above the chimney, but you should remember that if it is working, then the smoke should come out unhindered. This means that it is necessary to either raise it above the chimney by at least a meter, using metal rods, or place it nearby. In any of these cases, when the chimney is running, protection from sparks will be required, so it is advisable to fence off