How to properly sharpen scissors at home: quick and affordable ways. Sharpening scissors at home Scissors don't cut

07/30/2018 1 1 210 views

Sooner or later, the scissors become dull and begin to cut worse. Usually people prefer to buy new ones, because their cost is not very high. But some are interested in the question of how to properly sharpen scissors at home? It's quite simple and doesn't take much time. For this purpose, things that can be found in each apartment are used.

You can sharpen any scissors: manicure scissors, construction scissors, office scissors. Depending on the type, the methods of adding spice differ. Use sandpaper, a gypsy needle, and special sharpeners. It is important to be careful when working and carefully study the algorithm of actions. It is better to give preference to simple solutions to this problem.

How to prepare material for sharpening?

The easiest way to return sharpness is to hairdressing scissors and stationery scissors. The manicure option is much more difficult to put in order. Before you start sharpening, it is important to make sure that the reason is really that the tool is dull.

Sometimes the fastening axis is weakened where a regular rivet or bolt is used. In this case, they should be tightened. If after this the scissors do not cut well enough, you should sharpen the stop heel. It is located near the hole with the bolt. There is no need to try to close the blades, as this will only increase the problem.

If a rivet is used in the connection area, it should be tightened. First, the scissors should be opened and placed on any metal product.

Then, using a beard, flatten the rivet and check the closure of the blades. If the situation has not changed and the tool still does not cut, it needs to be sharpened.

What is the best thing not to do in the process?

Nail scissors must not be sharpened with foil or sandpaper. The method will give the tool sharpness for a short time, but it will deteriorate and the sharpening angle will change. Even an experienced specialist cannot repair the product.

Also, a regular grain stone or sharpening stone will not work for a manicure set. There will be marks on the coating. It is important to understand that individual methods are suitable for each type of scissors.

How to sharpen scissors with your own hands?

You will be able to sharpen the tool yourself if you have the following equipment at home:

1. Diamond wheel. It is chosen for any scissors, but it is especially effective for large products. For example, a tool for shearing sheep or gardening. For a manicure device, you should use a rounded stone or a diamond file.
2. Sharpening stone. The main difficulty lies in the selection of grain size. If you need to sharpen very sharply, the fine-grained part is used, in other cases the coarse-grained part is used. Hairdressing products are sharpened with a coarse-grained bar, otherwise they will be very sharp, but it will not be possible to cut curls normally. The hair will begin to slip from the blade.
3. File. It allows you to cope with difficult tasks. For example, with metal cutting products that have teeth. The main difficulty is choosing the size.

When using kitchen scissors privately, it is worth purchasing a special device to change their sharpness. You can buy a device that is both a knife and a sharpener for scissors; it will be indispensable in the household.

If there are no devices, it is worth using improvised means. Sharpening will be quick and easy. It is important to understand that the result will not be durable.

The sandpaper method is effective if the scissors are not very dull. We need to act as follows:

• Place the sandpaper with the abrasive part.
• Cut the paper into long strips so that the action takes place over the entire area of ​​the blade. There should be about twenty movements.
• Wipe the blades to remove any crumbs.
• Do a check.

The method is suitable for zigzag scissors. It is difficult to sharpen such products using a bar due to the specific edge.

Foil is used from improvised means. For maximum spiciness, slice large number thin stripes. If you need a light point, you can make 2-3 wide lines.

Sharpen as follows:

• Prepare a sheet of 25 cm. Fold it lengthwise several times to form a dense strip.
• Cut the foil along the lines.
• It is important that the blade is fully involved in the process.

When using metal sponge Remnants are flying from it. There are a lot of them, so cleaning can be difficult. It is better for the process to take place over a bucket. Algorithm of actions:

• Prepare a kitchen sponge. If possible, you should give preference to a softer option.
• Cut it with the whole blade. The sharpness of the scissors depends on the number of cuts.

The gypsy needle is suitable for small tools, for example, for cuticles. You can use it to sharpen nail clippers.

To use this method you will need:

1. Cutting a needle. Close the scissors and try to guide the needle along the blades.
2. There is no need to put in a lot of effort; it is better to carry out the procedure with light movements.
3. Continue the process until you get the result.

The needle can be replaced with a screwdriver, sewing pin, or knitting needle. It is important to cut metal.

When using glass jar you need to choose an unnecessary option, as there will be scratches on it. For small scissors, use a bottle with a narrow neck.

Algorithm of actions:

• Cut the can. It should move backwards and the blade should slide.
• The actions are repeated until the effect is noticeable.
• Wipe the blades as there will be some invisible dust on them.

It is important to understand that traditional methods designed for immediate results. To keep the tool sharp, you will need to constantly return to them. Therefore, it is worth using whenever possible professional methods.

1. Pay attention to the factory sharpening angle. The procedure must take place at the angle specified by the manufacturer. Otherwise, the device will be hopelessly damaged.
2. Sharpen "at yourself." It is important to monitor your own movements and not act “back and forth.” Scissors are sharpened from the end to the rings.
3. Remove burrs. They are removed with fine-grained abrasive. It should not be used for hairdressing scissors, as it acquires unnecessary sharpness.
4. Check the work. Cut surfaces for which a specific type of tool is created. To test the tailor's scissors, you need to cut the material. A thin flap is taken, hung, and cut. If the cuts are smooth, then the scissors are sharpened.

If possible, disassemble the tool by removing the securing bolt. Sharpening blades separately is more convenient and efficient.

Manicure

Experienced manicure specialists give scissors to professionals for sharpening. The rough method using large abrasive particles will damage cuticle nippers and tools. Therefore, it is better not to sharpen an expensive device yourself. Sharpening is often done using a laser.

Algorithm of actions:

1. Prepare a diamond file.
2. Lightly move the file towards the ends.
3. Make sure that the sharpening angle does not change.

Standard methods can be used, but must be done very carefully. Nail scissors with curved blades are easier to buy than to sharpen. But you are allowed to adjust the bolt if it helps.

For haircut

It is better not to sharpen it yourself, otherwise the tool will be damaged. To create these products, hard and durable steel is used. It is hardened, so you can do without sharpening for a long time. When it is required, special equipment is used - a machine with a laser sight that has replaceable disks.

Products for thinning are more difficult to put in order than others. They are non-standard, multi-blade. There are two blades - one is straight, the other is serrated. The sharpening angle of the teeth is 70 degrees. At the top of the corner there are grooves that hold the curls. Therefore, a special device is required. You need to contact a professional to use a sharpener with an angle adjustment.

Sheep shearing shears are unusual. They are sharp to cut fur precisely. Needle and sandpaper won't help here. You need to use wheels with small abrasive particles.

Algorithm of actions:

• Open the tool and place them on the circle.
• Turn on sharpening machine, sharpen to maximum results.
• Repeat the procedure for the other blade.

For metal cutting

In this case, such popular methods as sharpening with a needle, sandpaper or file are suitable.

Have your old scissors left over from your grandmother stopped cutting? It would seem like such a small thing. You can throw them in the trash and go buy new ones. But will you be able to buy good replacement damaged scissors, because nowadays the market is oversaturated with Chinese goods, which usually last a week in everyday life? You will have to sweat a lot and run around hardware stores to find a suitable cutting tool. Isn't it easier to tidy up your old scissors and use them for many more years? In this article we will tell you how to properly sharpen scissors at home.

If you've never encountered this problem and don't know which end to start repairing or sharpening, don't worry. We will teach you!

First, let's inspect the scissors and evaluate their working condition. Perhaps the problem is due to the fact that the knives on the axle are simply loose. The axis for the knives is usually either a bolt that is screwed into one of the knives, or a screw with a nut, or a special rivet. If a bolt and a screw can simply be tightened tighter, and the scissors will again look like they just came from the store, then with a rivet things are worse. You'll have to put in a little effort and ingenuity. To rivet the scissors, you need to place them open on a metal anvil and use a hammer and nail to flatten the rivet cap. Please note that the scissors must be open. Otherwise, after riveting, most likely, the blades will open with difficulty or will not open at all.

Read How to choose an ironing board

If the problem is not in weakened knives, then most likely the scissors are simply dull. This means they will have to be sharpened.

Preparation

For sharpening we need a file or a special whetstone for sharpening knives. It is best to use a coarse-grained stone so that after sharpening, small oblique teeth will form on the blades of the scissors. With this sharpening, the blades do not slip and cut the material perfectly.

Of course, you can sharpen scissors on an electric sharpening machine, but you should not take on this task if you are new to working with this power tool.

In fact, there is nothing complicated about the sharpening procedure. It is only important to remember some important points.

• Scissors should be sharpened by moving towards you, that is, from the ends to the rings.
• You must not violate the factory sharpening angle, which is usually 60-75 degrees.

Read Microwave ovens - benefits and harms

So, let's proceed directly to sharpening. Take open scissors and a sharpening tool. We hold the scissors by the rings. The tips of the blades point upward. It is more convenient to hold the scissors by tilting them at the desired angle (as mentioned above, the sharpening angle should be 60-75 degrees). We run a file or a block along the blades several times from the tips to the axis.

Quick ways

If you need scissors very urgently and you simply don’t have time to fuss with their repair and sharpening, you can use two quick methods.

• Take a piece of sandpaper and make cuts in several places with scissors.
• If you have a gypsy needle on hand (aka a bag needle - a long and thick needle), then you can use it. We take the needle, place it between the knives, as close to the axis as possible, and slowly close the blades. The needle should move towards the ends of the blades.

High-quality scissors allow you not to think about everyday details and quickly solve problems that arise. But pick up handy tool It’s not always easy or possible, and the old one tends to become dull. A video will help you best understand how to sharpen scissors at home, but we also offer you in this article detailed instructions several ways. After reading the above guide, you will not have any problems sharpening scissors and you can easily cope with such a simple task at home, without turning to specialists.

What scissors can be sharpened?

At home, you can restore the sharpness of any scissors:

• manicure;
• stationery;
• construction

The only caveat: depending on the size of the tool and the thickness of the metal of the working element, you will have to choose suitable way, since not all options are suitable, for example, for scissors, with which you add beauty to your hands.

Why don't scissors cut?

There are several reasons why the tool no longer cuts the material you need as it should:

• the fasteners connecting the 2 running gears are loose;
• the blades themselves became dull.

Each problem is solved differently. How to properly sharpen scissors at home in each of these cases, read below.

The easiest ways to sharpen

If the reason for the malfunction of the tool lies in the loosening of the lock, proceed as follows:

1. Tighten the bolt well with pliers or a screwdriver. The choice of a suitable device depends on the type of head of the retainer.
2. If the blades are connected with a rivet, open them, place them on a solid surface and use a hammer to slightly flatten the surface of the plug on one side.

Important! If these steps did not help solve the problem, then the reason is that the cutting edge of the blades has become dull. In this case, select the appropriate method from those suggested below. This video will help you better understand how to sharpen scissors at home.

How to quickly sharpen scissors?

If you need to use the tool right now, and special device or you don’t have a sharpener, use alternative ways to solve the problem, like how to sharpen scissors at home.

Method 1

See if you have sandpaper available. Material of any grain size is suitable. Your actions will be very simple and will take no more than 2 minutes:

1. Cut through the sandpaper several times.
2. Make sure it helps.
3. Use the tool for its intended purpose.

Method 2

Another absolutely inexpensive and quick option how to sharpen scissors at home - a gypsy needle. Use it as follows:

1. Insert the needle between the legs, positioning it as close to the axis as possible.
2. Slowly close the blades. At this moment the needle will move along the legs.
3. Repeat this sequence several times.
4. Make sure that the required blade sharpness is achieved.

Important! If the cutting device large size, you can replace the needle with a regular one glass bottle. The principle of application will be the same - several cutting movements on the surface. The only thing you need to consider if you chose these options in order to solve the problem of how to sharpen scissors is that the effect will be temporary. More thorough steps will be required if you use this tool quite often.

How to sharpen scissors correctly?

If you have thoroughly decided to approach restoring the sharpness of the blades and are even willing to spend a little time or money on it, take one of the options below into your arsenal.

Method 1

Purchase from a hardware store or household appliances) a special sharpener. With its help, you can restore the sharpness of the blades not only on scissors, but also on knives.

Method 2

If you have a special sharpening machine, you are unlikely to need a video to properly sharpen scissors at home. Most likely, when you bought it or made it yourself, you were already familiar with the technology.

Let us recall a few rules that cannot be ignored during the restoration process:

1. Pass the working elements along the sharpening disk towards you.
2. Sharpen the blades from the ends to the joint.
3. Maintain a sharpening angle of 60-75 degrees.

Important! If you don’t have an electric sharpener, you can replace it with a special stone. The steps will be the same, but you will need to hold the stone in your other hand yourself or fix it on a convenient surface.

1. Handle any sharp objects carefully.
2. Try to use the most simple solutions problems with a faulty tool.
3. Do not attempt sharpening on a power tool if you do not have the skills to do such work. You may not only damage your hands, but you are unlikely to be able to withstand desired angle tilt

How to sharpen scissors at home - this question often arises in everyday life. With frequent use, this tool may require sharpening even once every six months. Although it would seem that you can throw away the old ones and buy new ones, the modern market is flooded with low-quality Chinese products, and high-quality scissors are expensive.

Tools for professional cutting or cutting hair should be sharpened in a special workshop, but sometimes, when the scissors stop cutting, you need to straighten them immediately and there is no time to go to a specialist. You can solve this problem at home in the following ways for a wide variety of scissors: stationery, tailor's, hair cutting, manicure, gardening and even construction. The simplest reason for the deterioration of the tool’s performance may be the presence of dirt on the blades, for example, after cutting off the tape; in this case, it is enough to simply remove the deposit.

Lift

All kinds of scissors, for example, for paper, when they are in order, should cut the fabric, and the cutter's tool should cope with even the thinnest, for example, silk or chiffon, and not only the entire surface, but also the ends. If the blades individually seem sharp, but in fact do not cut the material, but chew it, then the reason may lie in the fact that the fastening of the blades has become loose. When the distance between the cutting surfaces becomes larger, the thin material is not cut, but is clamped. So before you start sharpening, you should try tightening the fastening and then try cutting the fabric again. It may turn out that this is where the problem ends.

The axis of the scissor wings is either a screw screwed into one of the halves, or a bolt with a nut, or a rivet. In the first and second cases, you should use a screwdriver (in the second option, pliers can also help, depending on the shape of the fastener) to tighten the fastening more tightly, having first opened the tool; if this is not done, then after tightening too hard, there is a risk of not being able to open the scissors in general, or the knives will move very slowly. In any case, you need to tighten it carefully and smoothly. It is permissible to turn the screw by a maximum of 0.5 mm, then you should check how the blades close, otherwise you can jam the tool so that it can no longer be repaired.

In the case of scissors with permanent fasteners, the situation is more complicated. The retainer consists of a rivet, a cap, on one side, and a small limiter, a plug made of soldered metal or plastic, on the other side. The tool should be opened, placed with the head down on an anvil or other strong flat metal object and fix it. Then, using a hammer, you need to slightly flatten the latch stop. After checking the cutting ability, repeat the operation if necessary.

If the movement of the scissors turns out to be difficult, they should be lubricated. A thin lubricant is suitable for this purpose. sewing machines or any oil. You just need to drop a little on the axle and the blades will move easier.

High-quality sharpening

If tightening does not help and the tool still does not cut well, it needs to be sharpened. The ideal sharpening can be achieved using an electric sharpening machine, which you can not only purchase, but also assemble and master yourself, but you will not need to start with scissors. It can even upgrade the tool used to cut electrical wires to such a state that it will cut the finest matter even with its very tips. Before you start sharpening, it is better to unwind the collapsible scissors, since it is more convenient to sharpen the knives separately, and the working surfaces must be prepared by cleaning them from dirt with a cotton pad with an alcohol-containing liquid. For your safety, you should wear leather gloves for rough work.

The angle of inclination of the cutting edges of scissors varies depending on their purpose. For most it is 60-75 degrees, and for stationery ones it is about 90 degrees. It is necessary to sharpen the blade, holding it by the ring, evenly along the entire length of the edge, strictly maintaining the appropriate angle. Sharpening the other side, the inner side, like a regular knife, is strictly prohibited, otherwise the gap between the halves will only increase and the tool will stop cutting altogether. Each knife should be moved along the disk slowly towards you, from the axis to the tips, or in the opposite direction, the main thing is not to move back and forth and not to tear the edge from the disk. It is better to sharpen the blades of scissors that do not unwind from the axis, so as not to accidentally damage the second sash.

The procedure must be repeated several times, from time to time removing emerging burrs by lightly running the plane of the cutting edge along the disk. Usually no more than 20 approaches are required. After 30-60 minutes, depending on the effort applied to the knives and the quality of the grinding wheel, you can get a perfectly sharpened tool. Anyone who has not sharpened scissors in this way before will find it difficult at first to determine whether the blade has already sharpened enough. To help you with this, you can paint the inclined cutting edge with a felt-tip pen before sharpening. When traces of paint completely disappear during the sharpening process, it can be considered complete.

Sharpening must be done by a person with a steady hand, capable of firmly fixing the direction. Even the slightest deviation in the angle of inclination will lead to the appearance of irregularities; some areas of the blades will no longer function correctly and because of this, the material will be cut unevenly, wrinkled and torn, or the cutting edges will quickly become dull. If you have old scissors you don't need, practice on them first to get a feel for how to sharpen correctly. Upon completion of sharpening the tool, both halves of the scissors need to be twisted again and checked how they move, cut a piece of material that matches the profile of this tool. If the resulting degree of spiciness is not satisfactory, you will have to repeat all the steps again.

If a special sharpening apparatus is not available, you can imitate it by using a file or a whetstone, the same one used to sharpen knives and other cutting tools. The stone usually has one side fine-grained and the other rougher. Severely dull scissors must first be processed on a rough surface to obtain small oblique teeth on the edges, thanks to which their wings will not slide over the material and will cut perfectly. After rough processing, the blades need to be brought down on the fine-grained side. You can also use only a medium-grained stone. The sharpener must first be prepared by covering the currently needed side with a special sharpening oil; if there is none, any oil will do, and in extreme cases, even water. You will need to make the same movements, but you will also have to hold the sharpener in your other hand or somehow secure it to a suitable surface.

You can also use a universal sharpener for knives and scissors. To achieve the goal with this device, 5-7 movements may be enough. But there is only one angle of inclination of the cutting edge. If it does not match that of your tool, effective sharpening will not work. And also in the role whetstone you can use sandpaper.

Features of sharpening manicure, garden, metal and hair scissors

Nail scissors have a different cutting edge than most scissors; they are very small and require delicate work. Tools with straight blades can be sharpened on a sharpening machine with a diamond wheel if you have the proper skill. The speed of the circle must be set to the lowest. Move each blade from the tip to the axis, without applying strong pressure.

An electric tool removes too much metal at a time; without proper experience, there is a risk of permanent damage. nail scissors, so to be on the safe side, you can use needle files instead, small needle files for minor works. First, a coarse-grained file is used, and then a fine one. You can also sharpen nail scissors on a small, fine-grained abrasive stone. It can be used to sharpen even tools with curved ends! To do this, you will need to give one of the edges of the sharpener a rounded shape with a radius of 0.4-0.5 cm.

To sharpen large curved branch scissors, you must first unwind them so that you can sharpen the entire length of the blades. To process the lower concave blade, you should use a sharpening wheel with a radius not exceeding 3.5 cm. To sharpen the tool for metal, they should also be unscrewed first, so that during sharpening, notches do not appear on the edges, which will prevent the smooth sliding of the metal along the blades, this is especially true for sheets thicker than 0.3 mm. Before reassembly it is necessary to lubricate the fastening with lithol or other lubricant.

If scissors used for cutting hair are sharpened on a fine-grained stone, the blades will be very sharp, but the tool will no longer cut. This will happen because the hair is very thin and it will begin to slide along the blades. So, to adjust such tools, you need to take only a coarse-grained stone and not fine-tune it. Make movements from the tips to the axis.

Quick ways

When you need to cut something right away or you don’t even have a file or a whetstone at hand, simple traditional methods using improvised means. These techniques are suitable for minor sharpening, when the tool has not yet become completely dull. But we must not forget that similar methods are significantly inferior in quality and duration of effect, and after 2-3 times of using them, you should still sharpen them conscientiously.

1. Cutting sandpaper. This procedure will only take a couple of minutes. 150-200 sandpaper is preferable, although it is acceptable to use coarser-grained sandpaper, and fine-grained sandpaper will do in a pinch. Take a sheet of such paper and fold it in half with the rubbing side up so that the abrasive processes the edges of the blades when cutting. The sandpaper also removes burrs and steps from the edges. For a noticeable effect, you should cut about 10-20 strips, using the entire length of the edges. You can also cut abrasive cloth on a fabric basis, steel wool or a kitchen sponge made of steel fibers with the same result.
2. Cutting aluminum foil. Take a sheet 20-25 cm long and fold it lengthwise into an accordion or fold it inward to form a thick strip. The more layers, the stronger the sharpening effect per cut. You need to cut the entire length of the edges. The more foil strips are cut, the better the sharpening will be.
3. Cutting a glass jar or bottle. If the scissors are small, it is better to use a bottle neck with a uniform width. The container, held with one hand, must be placed in fully open scissors, held with the other, and the rings must be slowly brought together, applying a slight force, as if wanting to cut it, until it is completely pushed out. This action should be repeated until the edges of the scissors become smooth and have the required sharpness. It’s better to take a container that you don’t mind, as scratches may form on it.
4. Threading with a sewing pin or large sewing needle. Everything is done the same way as cutting a jar. This method is best suited for small scissors, such as nail scissors.

After any sharpening, you need to wipe the doors with a dampened cloth to remove abrasive fragments.

How to properly use scissors to keep them sharp

If certain rules are followed, the tool may not require sharpening for years. Scissors used for cutting fabric should be used only for this purpose and should not be used to cut, say, fish fins, cardboard or even paper. In sewing, it is not uncommon to have to cut zippers or metal threads. For these operations it is better to have other scissors.

Some scissors require regular disinfection, such as those used for cooking, trimming plants, or trimming nails. For these purposes, you should not boil them, this leads to rapid dulling and rusting; it is better to treat them with an antiseptic, which can be found in a pharmacy, or with another alcohol-containing liquid.

The axes of all scissors should be lubricated every six months to ensure smooth operation and avoid corrosion.

Methods for sharpening manicure, household and sewing scissors.

Many girls who do their own manicures, some time after purchasing scissors, wonder how to sharpen them? Indeed, any scissors, whether they are for manicure, hairdressing or sewing, need periodic sharpening. In this article we will show you how to sharpen scissors.

This option is suitable if you need to sharpen household scissors. They are usually used to make appliqués with babies, or to cut thread. At the same time, there are no special requirements for the quality of sharpening. We can say that sharpening with a needle is considered the simplest, but not very in an efficient way. But for home scissors it is quite suitable.

Instructions:

• Take a thin needle, which is made from good metal, and you have a few more to replace
• The most interesting thing is that nothing will happen during manipulation with the needle.
• Open the scissors as wide as possible and insert the needle at the junction of the blades
• Now just try to cut the needle. Gradually it will move from the closure of the blades to their end
• The manipulation must be repeated for quite a long time. After a few minutes of cutting the needle with scissors, you will be able to sharpen the blades well

How to sharpen homemade scissors on a sharpener: instructions

There is a special sharpener for sharpening scissors. With its help you can make the blades sharp enough. This option is also suitable for scissors that are used in everyday life. The result after the procedure is not bad, but is not suitable for sharpening sewing tools.

VIDEO: Sharpening scissors on a sharpener

You can use a whetstone to sharpen household scissors. This is a piece of stone that is covered with fine abrasive chips. The effectiveness of the procedure is not the best, but it allows you to make the scissors sharper.

Instructions:

• Open the blades as wide as possible and place them on the block
• First move the blade from top to bottom, and then only in one direction
• This stage is the most effective and important, as it allows you to remove small nicks
• Move the blade in the direction of sharpening to the right
• Repeat the procedure with the second blade

Sharpening is carried out only at a certain angle, otherwise you risk damaging the scissors. Below is a table with sharpening angles for different cutting objects.

In general, experienced manicurists have their tools sharpened. It is worth noting that rough sharpening using large abrasive particles can damage cuticle tweezers and scissors. Therefore, if you have an expensive and professional instrument, we recommend giving it to a professional. Such tools are often sharpened using a laser.

Instructions:

• The operation is performed with a diamond file
• It is necessary to move the file with gentle pressure towards the tips of the scissors
• In this case, under no circumstances should the sharpening angle be violated.

It is better not to carry out such manipulations at home. You'll just ruin the scissors. The thing is that very strong and tough steel is used to make such items. It is hardened, which allows you to avoid sharpening the scissors for a long time. That is why it is used for sharpening special equipment. This is a machine with a laser sight and replaceable sharpening discs.

How to sharpen thinning scissors?

It is worth noting that these scissors are the most difficult to sharpen. They are unusual, but consist of two blades. One of the blades is straight, and the second is serrated. In this case, the sharpening angle of the teeth is 70 degrees. At the top of the corner are grooves that hold the hair. Accordingly, professional equipment is required to sharpen such a tool. As is the case with manicure accessories, thinning scissors should be sharpened by a specialist on a sharpening machine with laser angle adjustment.

VIDEO: Sharpening thinning scissors

This kind of tool also requires careful and very precise sharpening. Otherwise, you risk ruining them, or even worse, wasting expensive fabric for sewing clothes. But if you are very careful, you can try sharpening yourself.

Sharpening options:

• Foil. Fold regular baking foil into layers and cut it with scissors until you get the desired result.
• Sandpaper. Just cut the paper with a dull tool
• Bottle. Exactly the same as in the previous options, cut the bottle

Gardeners recommend tidying up at the end of the season. gardening tools. This also applies to scissors and pruners. Sharpening can be done using sharpening machine, if you have one. Otherwise, you can sharpen it with ordinary whetstones, which are sold in gardening stores.

Instructions:

• Clean scissors from rust and dried soil
• Place the blade on the block and move it back and forth
• Once one blade has been sharpened sufficiently, move on to the next one.

How to sharpen metal scissors?

There are many ways to sharpen metal scissors. The most common ones will also work:

• File
• Sandpaper
• With a needle

The video describes in more detail how to sharpen scissors for cutting metal.

VIDEO: Sharpening scissors for metal

This tool is special, it is quite sharp and must cut the wool as accurately as possible. That is why sharpening with a needle or sandpaper will not work. Basically, wheels with small abrasive particles are used for such purposes.

Instructions:

• Open the scissors and apply them to the circle
• Turn on the sharpening machine and sharpen until you are satisfied with the quality of the blade sharpening
• Sharpen the second blade in this way.

How to sharpen non-separable scissors?

IN in this case It will not be possible to separate the blades. Therefore, you will have to use a more primitive method, abandoning the sharpening machine. Needles, foil and sandpaper are suitable for sharpening. About methods of sharpening non-separable scissors in the video.

VIDEO: Sharpening non-separable scissors

As you can see, sharpening scissors is not difficult at all. The main thing is not to overestimate your capabilities. It is best to sharpen a professional tool using special equipment.

VIDEO: Features of sharpening scissors