How to open an intercom without a key (Vizit and others): professional and folk methods. Techniques and methods for opening an intercom without a key: how to do this? Codes and passwords

Almost everything apartment buildings are equipped with an intercom system. Getting into such a house is extremely problematic if you do not have a key reader or do not know the PIN code. What to do if you can’t get into your house late at night? In such cases, it is possible to open any device of well-known brands by entering a certain combination.

Methods for opening an intercom without a key

There are many manufacturers of intercom systems. But almost everyone has weak points in the system. How can you use the following techniques?

• Stun gun. Many people ask the question: is it possible to open any intercom with a stun gun? The door should be opened using the following steps. To the reader on external panel bring the stun gun and deliver a shock. There is a possibility that the system will think that this is a key and will open the lock, and there is also a possibility that the system will completely shut down, and then no one will be able to use this panel.

• Another way is to influence the device reader. This is a piezo element from a lighter. Bring it to the reader and click. The chances are small, but they still exist.
• Under the intercom panel there is magnetic lock. If you hit this area hard, the magnet's grip should loosen.
• How to open an intercom using force? First you need to press hard on the door, and then pull it sharply towards you.
• A simpler and more cunning way. It will work best during the daytime. Wait until someone leaves or comes in.
• Dial the number of any apartment and politely ask to open it. It is possible that some resident will believe that you are his neighbor, will enter into your position and open the door for you.
• Enter a special combination, a kind of key to all doors.

The last option seems to be the most effective. It is necessary to consider in more detail the combinations for the most common intercom systems.

How to open an intercom from Metakom without using a key

For products from Metacom, the procedure is as follows:

• press the calling key, then the apartment number, which begins the numbering of apartments;
• the first key again. “COD” will appear on the screen;
• You need to enter the numbers in sequence: 5, 7, 0, 2.

If it doesn't work, then:

• 65535 and press the first button;
• Next 1234, the bell key and the “8” key.

If the intercom does not open, then:

• enter 1234 and press the call button;
• 6, call button, 4568.

If you recognize the MK-20 M/T model, you can enter one of the following two combinations:

1. Call, 27, call, 5702.
2. Call, 1, call, 4526.

One method can definitely open the door.

Combination for Vizit devices

This company has many different models. For example, some have “*” instead of “C”, and “K” instead of “#”. This fact must be taken into account.

How to enter the settings menu? For this:

1. Press #.
2. 1234, the beep will sound.
3. If a signal consisting of two tones is heard, you can use one of the following combinations or alternately: “12345”, “3535”, “6767”, “9999”, “11639”.
4. The operation is completed by entering “2, pause, #, pause, 3535.”

Earlier models can be opened with short combinations: *#4230 or 12#345. New models require *#432 or 67#890.

The reception filmed by the guys on a phone camera:

Cyfral system

To log in using this system, you need to be patient and enter long combinations.

B0000. This combination is suitable for opening intercoms of the 2049.1M family. If entering such a sequence of buttons did not open the door, then ON should be displayed on the screen. Then press 2 and the door will open. If OFF is lit on the screen, then the program is protected from hacking.

0000CALL. This combination should open the doors of modification 2094M. COD should light up on the screen. Next, you need to enter 123456 and press the call button, or 4563 plus the call button, or 123400 and the call key. Did FO appear on the screen? You should press 601.

Open Eltis system without a key

This system is characterized by less protection than other brands of intercoms. Emergency opening can be done by dialing the following digital combinations. One of them must log in.

• Call key – 100 – call – 7-2-7-3.
• Call key – 100 – call – 2-3-2-3.
• Call key – APARTMENT NUMBER – call – intercom code. The code is suitable for systems that serve apartments with numbers that are multiples of a hundred. The intercom code is either 2323 or 7272, 7273.
• call key – 4-1 – call key -1-4-1-0.

How to get into the entrance protected by the Forward intercom?

This device must have a special hole in the reader area. If it is not sealed and is still accessible, then you can open the lock simply by inserting a thin wire or paper clip into the intercom. If opening with sharp objects is not possible, then you can, as with other models, try a number of digital combinations.

1. Call key – 5-5-7-7-9-8 – call.
2. 2-4-2-7-1-0-1.
3. 1-2-3-*-2-4-2-7-1-0-1.
4. Call button – 1-2-3-4.

If none of the combinations help, then you can try adding your key to the microcontroller database. To do this you need to do the following:

• 7-7-3-9-5-2-0-1 – * – 0 – *;
• Place the key on the reader and press the # key twice.

Attention! If the code for recording the key does not work, then you should try another one - 5755660.

Product discovery from Marshal

To open this device, you need to know the numbers of the last apartments in the entrance (hereinafter referred to as NPKVP) and use them in one of the combinations.

• NPKVP+1 – call – 5-5-5-5;
• NPKVP+1 – call – 1-9-5-8.

“NPKVP+1” means that you need to add one to the number.

Product from “Stroy Master”

Usually the installer forgets to change the factory codes. Therefore, you can successfully open the door by entering the following combinations in turn on the external panel.

1. 1-2-3-4, 6-7-6-7, 3-5-3-5, 9-9-9-9, 1-2-3-4-5, 0-0-0-0, 1-1-6-3-9. The call and cancel buttons pressed simultaneously complete the action.
2. Call button – 1234.

Door with intercom Laskomex

This manufacturer uses unique four-digit codes for each device. Therefore, if you recognize this code, you can use it in combination: call button - apartment number - unique code from the manufacturer.

Another method does not require a unique code for your home intercom, but only knowledge of simple combinations:

• alternately press the buttons with the image of the key and 0 four times, it looks like this: K-0-K-0-K-0-K-0 (where K is the key with the image of the key);
• then enter 6-6-6-6, wait for P to appear on the screen;
• press 8;
• the door from the entrance will open in a few seconds.

How to open an intercom without a chip from Techcom

The process of opening an intercom from Techcom involves entering a general code and a part consisting of a unique code for a specific sample. If the installers have not set the code, you can enter the following combination: 2-5-8 – 1-2-3-4 – call key – 3, “F3” will appear on the screen. This means that the key adding service has been entered. You need to enter the apartment number and attach the key to the reader. If there is already a cipher for this key in memory, then a double signal will sound, if not, then the cipher will be written, accompanied by a single signal. To exit the menu, you need to press “X”; if you do not do this, the device will not remember the settings.

Old models from this company can be opened using the following combination:

• 1-6-0, and while dialing numbers, you need to hold them;
• release in reverse order: 0-6-1;
• “- -“ should appear on the screen, press 4-3-2-1;
• The process will be completed by dialing B-3-B.

Opening the Factorial device

Installers can complicate the entire process of opening this device without a key. They usually change the factory settings. If this was not done, then you can open it with the following set of characters:

• 0-0-0-0-0-0 or 1-2-3-4-5-6;
• 5 – the entry “180180” will appear on the screen – call button – 4 – call button.

If the installers did not have time to change the service settings, then this decision will help you get into the entrance in an emergency.

“Safe-Service” is opened with the following combination

As in the previous copy, you can enter combinations of six zeros or in the order from one to six. If the settings have been changed, the following steps should help you:

• press and hold button 5;
• ON will appear on the screen;
• enter 1-8-0-1-8-0 – B – 5;

However, this combination does not guarantee success. The same applies to all intercom systems. None of the above combinations of symbols and actions guarantees the opening of the intercom. Installers and service companies They have long known a method that opens a door without a key.

It is worth remembering that using these methods to enter other people's entrances is a crime. They can only be used in emergency situations to enter your entrance.

An intercom, you see, is a very convenient thing to use and extremely necessary for increasing security at the entrance. Strangers will not just enter the house, will not litter, will not cut the doors simply because there is nothing to do, will not scare a child who is returning from school, will not turn the entrance into a public toilet. But in some cases the same useful thing can significantly complicate life - if you have lost your keys or forgotten them at home, if you come to visit and the owner does not hear the bell. And here the question becomes very pressing: without a key (Vizit, Cyfral, Metacom or Eltis - the company that made the device no longer plays a role here).

Codes and passwords

The easiest way to do this is with a special code from the device. In theory, when installing an intercom, such passwords should be set individually and not revealed to strangers (some installation companies, however, inform their residents of the entrance, but this is not a very common practice). In fact, people often forget about this or are simply too lazy to change the factory code. Then you're in luck, these codes aren't much of a secret. How to open an intercom without a key - Vizit is password protected with *#4230 or *#423, Metacom, in turn, is 6553512348, Eltis is B12342133123.

Impact of force

But let’s say the installers were caught in good faith and changed the password codes. You can try the forceful method. Many people recommend the Vizit method - suddenly and sharply yanking the door towards you. Ladies are unlikely to succeed; such a solution will not work even with a small, “not grippy” hand. Sometimes a blow to the door, ten centimeters below the intercom, is effective. It is doubtful that you will use these methods on your porch. Firstly, in this case it is easier to call one of your well-known neighbors, and secondly, if you do not calculate the force, you can damage the device. So what are the power options for how to open the intercom without Vizit key, are more suitable in someone else’s house, although even here you can get into trouble if you run into vigilant local residents.

Stun gun instead of a key

It will be less traumatic for the entrance to try to attract electrical appliances as a way to open Vizit intercom. If there is a shocker, they say, its discharge is quite capable of opening the treasured door. However, it is unlikely - manufacturers are also not so simple; most devices provide grounding.

How to open the "Visit" intercom without a key and without additional devices, have already been invented by inventors who found themselves in a similar situation. We checked it - it seems to work, although it sounds funny. Just take some foil (suitable from a cigarette pack) and wet it (the easiest way is to spit). True, the method only works if the intercom key is in the shape of a tablet.

Universal key

It is generally believed that the most reliable way open an intercom without a key - get a universal one that opens most intercom models.

This station wagon is sold by many manufacturing companies, although its versatility is questioned by a significant number of people.

Sometimes honesty is safer

Well, if all these methods did not produce results or you do not want to use them for your own reasons, try calling any apartment at random and honestly describe the situation. It is quite possible that your friend’s neighbors will be imbued with sympathy and open the entrance door to you.

Muravlenko sentenced to a hooligan, with tenacity worthy best use, who broke the intercoms of high-rise buildings. He was detained only thanks to the vigilance of the residents themselves. The amount of technical damage is more than one hundred thousand rubles. Previously, the young man amused himself by shooting cars with pneumatic guns; he was caught, but forgiven under an amnesty.

Last October in different points In the city, one after another, intercoms began to fail. The company's installation specialists immediately determined that it was the work of a hooligan. The police managed to detain the criminal only in December. Not without the help of city residents. The vigilant girl reported that in one of the entrances of house number 54 on Lenin Street the intercom broke down immediately after the young people’s visit. Within half an hour, the police patrol detained them. One of the guys had a stun gun, which he used to damage the intercoms. " This person familiar to police officers, because only in October 2013 the criminal case against him was completed; he was shooting at cars with an air pistol in the entrance. However, an amnesty came into force and the criminal case was dropped. It turns out that the young man thought that he would always be so lucky,” says Zulfiya Ilyina, investigator of the Russian Department of Internal Affairs for the city of Muravlenko.

In just a few months, the hooligan managed to damage the intercoms in the entrances of 46 houses. Domofon-Service eliminated the consequences of such looting for about six months. At many addresses, the electronic call unit had to be completely replaced. At the same time, the organization suffered not only material damage, but also moral damage. Clients refused to believe that the intercoms were damaged by an attacker and demanded a recalculation. Meanwhile, the intercom company had encountered similar cases of looting before, but for the first time on such a scale. “There is no protection against a stun gun yet. Released a new one the lineup intercoms, now, as far as possible, we are trying to replace them,” says Timur Makhyanov, head of the Domofon-Service section.

The case of damage to intercoms was heard in court in April. The young man did not deny guilt. The court's verdict has already entered into legal force. “The defendant was sentenced to 2 years of suspended imprisonment, with probationary period 2 years. And also with the use of compulsory measures of a medical nature in the form of compulsory observation and treatment by a psychiatrist on an outpatient basis,” explains senior assistant prosecutor of the city of Muravlenko Dmitry Morkovkin.

Meanwhile, the intercom company intends to go to court again. “We will re-sue for damages. And although he promised us in court that he would compensate us, this was done verbally and was not recorded anywhere. The amount of damage amounted to 113,500 thousand rubles,” says Timur Makhyanov, head of the Domofon-Service site.