How to build a washbasin in the country. Do-it-yourself washbasin for your dacha: from bottles and canisters, “moidodyr” and portable

After the stuffy and dusty city, it’s so nice to find yourself in the countryside, fresh air and bright sunshine. But outdoor recreation, family dinner in the gazebo, work in the garden - all these ordinary summer cottage activities are impossible without the presence of water. And no matter how the site is equipped, a washbasin in the country remains an essential item. It will allow you not only to wash your face, but also to wash vegetables or dishes. The lack of constant access to water on the site can spoil your rest and create certain inconveniences at work. A natural question arises: how to build a washbasin in the country?

Types of washbasins

Installing a sink is not such a difficult process. The main thing is to decide which washbasin would be better suited for the dacha. Depending on the design, the following types can be roughly distinguished:

Self-leveling washbasin . The most common type. Usually this is a container with a water tap and a lid into which water is poured manually. According to the method of fastening, such models are divided into:

Hanging. Gazebos are attached to any vertical surface, most often to the wall of a house. A tree trunk or fence will also work.

On the counter. It could be finished design, which is easy to install anywhere on the site.

The main advantages of this model are mobility, ease of use and maintenance. And also the fact that such a washbasin does not require running water. The disadvantage is the limited volume of the filling tank, which will have to be constantly replenished.

Stationary washbasin. This design is installed in the same way as it is done indoors, that is, with water supply and sewerage. The undeniable advantage of the model is the constant availability of water.

Heated washbasin. How to make a washbasin in the country that will provide a certain level of comfort? Regardless of the material of manufacture, the design is a container in which a a heating element.

How to build a washbasin in the country with your own hands

If you decide not to spend money on a ready-made washbasin, then a few will come in handy simple ways How to make a washbasin in the country with your own hands. Any available materials will be useful, for example, cans and even plastic bottles.

Wall-hung washbasin made from a water cylinder. For this budget option you will need the following materials:

Empty cylinder for drinking water(a plastic bottle will do).

Ball valve

Flexible hose from 1 to 3 meters long.

Spruce cutter attachment for water.

Silicone sealant.

Installation steps:

The bottom of the cylinder is cut off.

A hole is made in the lid of the cylinder according to the diameter of the hose.

A small piece of flexible hose is cut off. One end of it is threaded into the hole in the lid, and a tap is connected to the other.

Treat the entry point of the tap with sealant.

Connect another piece of flexible hose to ball valve on the other hand, and install a divider on its free end, which can be used as a shower head.

The cylinder can be mounted upside down on the wall of a barn or on a tree. Interesting solution– place the balloon in an old basketball hoop.

A plastic canister or zinc bucket is also used as a container. This convenient design does not require any costs and will be a great help in conditions where the dacha is an uninhabited piece of land.

Washbasin on counter. To build such a washbasin in the country, you need to complete several steps:

First of all, the frame is made. This will require metallic profile, bolts or screws, welding machine. The blanks cut from the profile according to a preliminary sketch are connected by welding, and in the absence of welding, they are fastened with self-tapping screws.

Water drainage is organized. For his successful work needed: sink, corrugated pipe for drainage, seal, container for dirty water, for example, a bucket. If desired, the drainage system can be improved by organizing a small drain hole, or use a sewer pipe.

A water barrel is installed. You can use a canister or any other container with a tap installed in it.

To make the washbasin more modern, you can add a water heating function, which will be provided by a simple heating element. You can sheathe the frame and think about making a countertop for a washbasin.

How to decorate a washbasin in the country

In addition to functionality, the washbasin can also perform decorative functions. To turn personal plot In order to find a cozy and comfortable place to stay, you need to think about how to decorate a washbasin for your dacha and show a little imagination.

A washstand made from a barrel looks unusual and beautiful. This design, in addition to practicality, creates special style. Great opportunities for the manifestation of design ideas are provided by the use of such interesting objects as galvanized buckets and vessels, tubs, elements made in the form of original figures. Wood, stone, plastic and metal are often used to decorate washbasins.

Where to buy a washbasin for your dacha?

Do not forget that a washbasin is a specialized product, the production of which has certain requirements. If you don't have original idea How to make a washbasin for a summer house, then there is no point in starting this labor-intensive process.

Today in the hitsad.ru store you can buy a decorative washbasin for your dacha, which will not only perfectly cope with its intended purpose, but will also become a real decoration of the site. Presented here big choice interesting models made of modern fiberglass, imitating natural materials and subtly conveying the natural shades of bronze or stone. Particularly popular are models made in antique and rustic style. There are worthy offers for those who do not know where to buy a zinc washbasin for their summer house.

In addition to their decorative qualities, such washbasins are easy to carry and install, have increased durability and do not require special care.

Network water and sewerage are not always available at the dacha.

But this is where a washstand is most needed.

When doing gardening work, every now and then you need to wash your hands, fruits, berries, vegetables, dishes after eating also need bath procedures.

Their main difference is functionality.

The most common types of washbasins:

• A simple washbasin. It is a small hinged tank with a pressure spout. The container has a small volume - 3-5 liters. It is easy to attach - all you need is a suitable vertical stand. It could be a tree, a fence, a wall of a country house. Water is poured into the container manually, and drainage can be done into a bucket or basin and the waste can be poured into cesspool as it accumulates. If it is rarely used, there is no need to substitute anything - the wastewater will go into the soil. For their better absorption You should pour some gravel under the washbasin. It is suitable for washing, but this volume of water is not enough to wash dishes.
• Large volume washbasins. This is a vessel with a capacity of 10 to 18 liters - rectangular, round or oval in shape with a built-in tap at the bottom of the wall. Its convenience lies in the fact that you need to fill it with water less often, and the use of a faucet allows you to open the water and use it without doing any more manipulations. The container can be made of stainless steel or plastic. Large washbasins can be hung on a vertical base: a wall or a stand, both outside and indoors.
• Washstand on the counter. The water tank is fixed to a metal support at the top. This type of washbasin is only used outdoors. There is a crossbar at the bottom of the stand; to install it, just press it with your foot and the support arms will be firmly driven into the soil. This washbasin is easy to install in any convenient place in the garden. There is a valve mounted on the wall at the bottom of the container, and the volume of water containers ranges from 8 to 15 liters.
• Washstand with cabinet. It consists of a cabinet, sink and tank. This is a multifunctional design, it can be placed outdoors and indoors. Under the sink, inside the cabinet, there is a bucket for waste. The presence of a sink in the design makes it possible not only to wash, but also to wash dishes and garden products. The water tank is also equipped with a valve, which allows you to wash greens and berries under running water. It can be equipped with a mirror, a towel rack, and a soap stand. The cabinet is a convenient place to store cleaning supplies and products.
• Heated washbasin. This is an improved model of a washbasin with a cabinet. The difference is that a heating element is installed in the tank, which heats the water, everything else is the same. Heating water makes it possible comfortable stay at the dacha: hygiene procedures warm water, washing dishes hot and so on. Using a thermostat, you can heat water to temperatures from 30 to 70 degrees. The volume of dishes usually ranges from 10 to 20 liters. And it is made of durable plastic, used for the manufacture of electric kettles. Sometimes it is welded from stainless steel.

All types of washstands can be purchased ready-made in the store, but not everyone can afford this. Therefore, making a washbasin at the dacha yourself is not difficult, and even economical. Moreover, this way you can spend time with your child and teach him a lot.

We do it ourselves and have fun

To build a country washbasin you will need to purchase:

• Water tank and plumbing fittings. You can fit a canister, bucket, or barrel under the tank - this will save money for the washbasin.
• Sink the right size and shapes. Any old sink will do; an old, Soviet-era plumbing accessory is especially convenient.
• Materials for the frame and connection of the sink and container. Can also be used under a cabinet old bedside table, chest of drawers, secretary desk.
• Special materials for connecting water and discharging waste into the sewer system. You can use a garbage can or drain the waste pipe into a cesspool.

An old teapot with a spout will do just fine.

Attach it to a vertical surface by nailing long nails to it so that the kettle rests on them.

Pour water into the kettle, close the lid tightly and tilt it slightly.

After washing your hands, place the kettle so that it does not spill.

You can place a bucket or basin under the drain; if you use it infrequently, the waste will simply be absorbed into the ground.

Plywood is in use!

To make this washbasin, you need to prepare some materials and tools:

• rectangular plywood sheet
• protective impregnation for wood
• tank, preferably galvanized
• faucet
• hose
• device for draining waste water;
• frame-stand, can be from an old table or bedside table
• ceramic tile
• screws, metal drill
• brush, tile adhesive

The canister is not only for gasoline

A water tank can be made not only from plastic canister, but also an old large saucepan or tank. It is important that they have a lid - after filling the container with water, it must be closed to avoid contamination of the water.

The selected container must be equipped with a tap; to do this, drill or cut a hole at the bottom. To ensure tightness, it is necessary to install a squeegee in the hole, securing it with rubber gaskets on both sides.

The drive is fixed from the internal and outside nuts, and then a tap is installed on it.

When installing drainage from a washbasin, the main thing is to seal the joints. Drainage can be done in several ways: place a bucket under the sink, dig drainage ditch, make a channel with a pipe to the sewer pit.

Lead selection Wastewater depends on the intensity of use of the washbasin and the volume of these drains. If they are small, you can fill the soil under the manufactured structure using crushed stone or gravel so that the drainage goes into the ground.

Racks? Very durable!

It is not difficult to make a washstand on stands. For the frame it is taken steel pipe any cross-section shape and small. You will need tools: a grinder for cutting pieces of pipe and a welding machine.

For stability, make the frame on two supports located at a distance of 20-25 cm.

A water tank can be made from any suitable container or purchased ready-made. The support is mounted as follows:

• Measure the required length of supports and cut two pieces of pipe.
• To easily bury the supports into the ground, cut off their ends at an angle.
• Cut a piece of pipe for the jumper at the bottom and another for the bar on which the water dish will be attached.
• Weld the jumper at the bottom of the supports, and the bar for the tank at the top.

Now a container is attached to the supports at the top, on the bar; if it is metal, then it can simply be welded. Equip it with a faucet and place the washstand in the right place, pressing the jumper with your foot so that the support fits well into the soil. Fill a container with water and you can use it.

How to make heating

You can heat the water in washbasins with large capacity, “moidodyr” type or on supports. The main thing is that there is an electrical outlet nearby.

You can heat the water an ordinary boiler, but it is more convenient and safer to use a heating element with a thermostat. It must be installed in a container 3-5 cm above the bottom, then it will work and the water will immediately flow warm. It is installed by inserting into the body.

In this case, the block with the thermostat remains on the outer wall, which makes it difficult to seal the tank. You can simply immerse the heating element into the tank through the lid and not think about the integrity of the tank.

A little about capacity

When planning the construction of a country washbasin, you should think through in advance some issues regarding the choice of a water tank so that it is durable, easy to clean and provides normal pressure.

If you make an accessory with a cabinet, then you need to take large capacity, at least 10-20 liters - a smaller volume of water does not make sense. The material from which the tank is made is also important. They are usually made from stainless steel.

The choice remains with the owner, and he is guided, as a rule, by the cost of the item. It is better to take a container for a country washstand from stainless steel, because it is durable and reliable. The plastic may burst, crack or splinter if the structure suddenly falls.

In order not to regret it later, it is better to spend money once and be confident in the strength of the container.

The shape of the tank is also very important. The higher the water level in the tank, the stronger the pressure from the tap. From flat and horizontal tank the water is flowing in a thin stream. The container should be selected with an elongated shape and so that its bottom slopes towards the tap.

The location of the tap also plays a role in the jet pressure. The lower the faucet is embedded, the stronger the pressure. This is especially true for valve taps, in which the pressure is lost even when it is opened.

In addition, the tap located below makes it possible full use water filled into the tank. There will be no need to constantly add additional portions of water to the still empty container.

It’s not at all difficult to choose a washbasin model, a place to install it, and even make your own washbasin for your summer cottage. Without this attribute, no work in the garden or garden is possible. Even rest will be uncomfortable if you constantly ask someone to pour water just to wash your hands.

How to make a country washbasin with your own hands - on video:

The dacha has long been a vacation spot for city residents. Here you can grow beautiful flowers and organic vegetables, as well as relax with company. Washbasins for the garden and cottage not only provide minimal comfort, but can also become excellent decor garden plot.

What types of garden washbasins are there?

Washbasins for the garden and cottage are street structures, in which there is no provision for connection to a water supply system and. All of them have a reservoir for storing water. They can be installed in any corner of the site.

The choice of outdoor washbasins on the market is very diverse. These are the simplest suspended structures, and real works of art designed by famous designers.

Do-it-yourself washbasin for a summer house

Garden washbasins can be:

• hanging;
• on the counter;
• with a cabinet;
• heated.

For those who want to show their individuality, making an outdoor washstand with your own hands is also not difficult. You will be able to show your imagination and find the most unexpected solutions.

Hanging washbasins

The most simple designs washbasins - hanging. They can be mounted anywhere, be it a wall, a tree, a fence, or just a stick dug into the ground. The main thing is to find a vertical surface where you can drive a nail or screw in a self-tapping screw.

Hanging washbasin

Portable washbasins are designed for small volumes, up to 5 liters. They are made of plastic. They come in oval, round or conical shape. Instead of a tap, there is a movable spout-shutter. They pressed it and water began to flow; when they released it, the water stopped. They are very easy to install - just hang them on a nail. Moreover, they are mobile; they can be moved to another place at any time without any effort.

There are also more advanced models of hanging washbasins. More voluminous plastic tank(10-15 l), often rectangular in shape, has two lids for pouring water. The spout is equipped with a magnet and can be fixed for ease of use. Some models are equipped with a simple valve.

Galvanized washbasin

Another option for a wall-mounted washbasin is an oval tank made of galvanized steel with a tap. Outwardly, it certainly outperforms its plastic counterparts. But the service life of such a washbasin will be shorter, since steel rusts when exposed to water, and over time the tank will leak.

When using wall-mounted washbasins, water is usually drained into a supported bucket or other container.

Washbasins on counter

Sometimes, for convenience, you need to install a washbasin in a place where there are no supports (for example, in the middle of a vegetable garden). Great solution in this case there will be washbasins equipped with a metal stand.

Washbasin on counter

The stand is made of lightweight metal. Its design is simple: legs, bottom bar and tripod. When you press the bar with your foot, under the influence of a person’s weight, the legs easily go deeper into the ground. The tank is installed on a tripod and, after pouring water into it, the washbasin can be used.

Due to their mobility, lightness and simplicity, such models are very convenient in remote areas. open areas, be it a potato field or a raspberry field.

Washbasins with cabinet

More advanced models are washbasins with a cabinet or sinks. They are equipped with a sink, a water tank with a tap, and a cabinet. The cabinet is made of wood, metal or plastic.

Washbasin with chipboard cabinet

This washbasin can be used both outdoors and indoors (for example, on country veranda). These models are no longer so mobile and are considered more stationary.

Advice. On the street, it is better to install a cabinet with a washbasin under a canopy, since the materials from which the cabinet is made may not withstand the effects of precipitation and temperature changes.

Depending on the model, moydodyrs are equipped with a mirror, soap dish, and towel hanger. Inside the cabinet, either buckets are installed to drain the water, or a corrugated pipe is used to drain the drain into. Tanks in moydodyrs are designed for a larger volume (up to 32 liters), which is also important for convenience.

The presence of a sink makes using the washbasin more comfortable. Here you can calmly wash fruits or dishes.

Washbasin with cabinet made of plastic will do for both indoor and outdoor installation

The design of washbasins with a cabinet can be different. Some models no longer only have functional value, but also become an integral element of garden decor.

Heated washbasin

IN summer heat Few people think about water temperature, but with the onset of autumn or simply on cool days, wash your face cold water it becomes uncomfortable. Manufacturers found a way out and developed washbasins with a built-in element for heating water.

A heated washbasin should be placed near electrical wiring.

These washbasins can be used both outdoors and indoors. country house, provided that there is a power supply. The tank is often made of translucent plastic, through which the remaining water level can be seen. Some high-tech models are equipped with a sensor that automatically heats the water to a certain temperature.

DIY garden washbasin

An owner with “golden hands” can make a washbasin for his dacha with his own hands. Even a child can do some options, but a real master can create a design that will become his pride.

The simplest option is a five-liter plastic bottle mounted on a support with the neck down. The bottom of the bottle needs to be cut off - water will be poured here. The water flow will be regulated by unscrewing the plug on the neck. Such a washbasin can be built in spartan conditions in an uninhabited area; this does not require special tools or raw materials.

Homemade washbasin from a plastic bottle

A more complicated option is a hanging tank made from a bucket. Any bucket will do – plastic, nylon, metal. For the tap, you need to drill a hole in the bottom of the container or on the side. A squeegee is installed in the hole, which is fixed with locknuts from the outer and inside. A crane is attached to the squeegee. The structure is ready. For convenience, you can install a sink under the container. These washbasins can be decorated to suit your taste. They will fit perfectly into the country style of decorating a summer cottage. Using the same principle, you can arrange Summer shower Location on.

If you want to make a washbasin with a cabinet with your own hands, then the flight of imagination can be limitless. Under the cabinet you can use:

• old secretary desk
• a stand from an old sewing machine,
• dresser,
• rare buffet, etc.

A decorated barrel looks very original as a cabinet.

Washbasin with drain to septic tank

The cabinet can be made from wooden blocks, and the design can be folding and portable.

Already used apartment options are usually used as sinks. Often they still look decent, but fashion dictates its own rules, and old shells are sent to the country. Aluminum or copper basins look impressive as sinks.

Any non-leakage container can serve as a tank:

• bucket;
• barrel;
• old manual washing machine;
• plastic canister.

Used water can be drained into a bucket under the sink. The drain can be improved by running drain pipes to a dug hole at the end of the site.

Once you have decided on the materials, you can begin assembly.

1. Attach the tap to the tank.
2. Install and secure the tank to the support.
3. Prepare a hole in the cabinet or countertop to match the size of the existing sink. If a basin is used, a drain hole will be sufficient.
4. Place the cabinet firmly and secure the sink to it.
5. Arrange for drainage of used water.
6. Decorate the entire structure at your discretion.

Having a washbasin in your dacha or garden will make your stay there more comfortable. You can always wash your hands and freshly picked vegetables from the garden. If you take a creative approach to choosing a washbasin, it will simply perform its main function, but will also become the highlight of the entire summer cottage.

Beautiful washbasin for your dacha with your own hands: video

Washbasin for the garden and cottage: photo

They almost cannot afford to install a properly functioning water supply system. And water is very necessary for summer cottage. There is a need to wash food or you need to wash dirty hands.

Fortunately, for these purposes, people came up with a washbasin that every summer resident can make or install.

It can be installed both outdoors and at home. There are several types of washbasins that have various designs and functions. Today you can buy a washbasin on the market for no more price than making it yourself.

But something made by yourself will not only be beautiful and well made, but you can also implement many necessary functions.

Simple type hanging washbasin.

This washbasin is the simplest, which consists of a container and is filled with water, and a container is placed at the bottom for draining. It is easy to carry and install in any desired place.

Depending on where the washbasin is installed, the water is drained different ways. If installed in a garden, then the water is drained into the garden, or into a hole, and if inside the house, then it is drained into special containers, usually this is an ordinary bucket.

To prevent water from collecting in the garden under the washbasin, crushed stone is placed underneath it. Wall-hung washbasins have gained immense popularity due to their low cost and ease of use.

There are also large-capacity washbasins for filling with water. They have a large number of advantages: you need to add water less often, the capacity of the container lasts for a long time, it has a tap valve. They are made from plastics and stainless steel.

Washbasins mounted on a counter

This option is very often used, since almost all novice summer residents made this design on their site, this is a washbasin on a counter.
Braziers and barbecues in assortment and to order, forged.

The water tank is mounted on a counter, and this washbasin can be installed in any corner of the summer cottage.

This design can be made with your own hands and it will not take much time and material. All you need are pipes, a welding machine and a grinder for cutting metal.

First, measure the required lengths of pipes and cut them. The ends of the posts are cut at an angle so that they can be easily driven into the ground. A mount for a water container is welded on the top of the rack.

Washbasin with a moidodyr-type bedside table.

This washbasin consists of a bedside table, a sink installed on it and a washbasin. This structure can also be installed at home and in the garden.

Under the bedside table there is a container for drainage or other household appliances. The presence of a sink allows you to wash vegetables and dishes, as they can be placed on the sink.

In addition, on the top of the washbasin you can attach a mirror, towel holders and other stands for various things.

How to make a washbasin yourself?

Washbasins for summer cottages They don't cost a lot of money. The price depends on the design and type of washbasin, as well as its function. In addition, anyone can make a washbasin.

Choosing a washbasin

When choosing, you should pay attention to the shape and size of the water container. The selection of a washbasin begins from these criteria.

It is also very important where you want to use it, at home or on the site. The shapes of the containers play a very important role; the pressure of flowing water from the tap depends on their shape.

You also need to consider how and where the faucet or valve of the washbasin is located. The amount of water will depend on this.

Washbasin cabinet frame

If you want to make a cabinet and washbasin with your own hands, then you need to consider some points. For example, will you need space under the sink for household utensils, the size of the washbasin, the presence of hooks and a mirror.

85 cm to 1 m is the most convenient height for the sink; these values ​​are taken from the height and proportions of the family members who will use the sink.

The frame is welded from metal corners or profiles, which are marked according to the size of the washbasin. You can also make the frame from boards or bars, but nothing can resist the strength of metal.

Also, if the washbasin is installed at home, you can attach a countertop to it, on which you can cut food and cook.

Photos of washbasins for the dacha

In this article we will tell you how to make a washbasin for your dacha with your own hands, we will look at various options, and also show photos and video instructions for creating an outdoor washbasin.

The washbasin should be:

• simple;
• multifunctional (so you can not only wash your hands);
• convenient.

If your dacha does not yet have a washbasin, then please read this article carefully. In fact, there are more than enough ways to make a homemade washstand.

From a plastic bottle

Simplest, a budget option. This could be a 1.5 liter bottle or a 5 liter bottle. First you need to cut off the bottom. Then, using a clamp or aluminum wire, secure it to some vertical plane. The role of the dispenser in in this case the lid itself will play. We put some water in the container, and it will flow in a thin stream when we slightly open the lid. The result is the simplest – and it couldn’t be simpler – wall-mounted washbasin. That's all the wisdom of this washstand.

With faucet

This permanent structure is more complex, so its manufacture will require at least basic knowledge of plumbing. It will be good if in your household by chance there will be a small 6-liter plastic (soft plastic) can with a wide neck or any other suitable container. This time we will have to spend money on purchasing accessories for the future washbasin. You will need:

• drive;
• water supply tap;
• two rubber gaskets;
• two nuts;
• two washers.

The work will not require professional skills. It's simple: drill a hole in the bottom of the can to match the diameter of the drive (the lower, the better). We insert the drive itself into the hole with the side where there are more threads, install washers on both sides, and then gaskets and clamp them with nuts on both sides. After this, we screw on the faucet, having previously wound a linen winding coated with a special impregnation onto the squeegee clockwise and that’s it, the washbasin is ready.

All that remains is to choose a suitable cabinet for it or a stand pre-attached from four wooden blocks. Having secured the can to this structure, fill it with water. And now you have a more civilized option for a larger volume of liquid in the country washbasin and, moreover, with a tap for water supply.

In that simple version You can do without a washbasin without flushing. For example, take a 10-liter galvanized bucket. We will need:

• two rubber gaskets;
• screw;
• brass pin-type water tap;
• drill attachment.

The work is simple: in the lower part of the bucket, using a nozzle, we drill a diameter for a brass tap. Place a gasket on it and insert it into the finished hole. On the other side we also insert the gasket and tighten it with a nut. Top part The washbasin is ready.

It would not be out of place to say that outdoor washbasin must be equipped with a drain. This can be an ordinary container where used water is collected or a ready-made sink with a corrugated tube inserted into the drain (from three meters). With the help of such a tube, water can simply be drained into the garden and absorbed into the ground. Some people do not install a drain at all, and the water flows directly onto the ground. And so that dirty slurry does not form under your feet (two buckets are enough). As they say, cheap and cheerful.

For indoors

If we are talking about homemade washbasins outdoors, then it is definitely worth mentioning indoor washbasins. The indoor washbasin is much more complex in design than its outdoor counterparts. It is clear that here you need to take care not only of its functionality, but also of its beauty. In other words, it should fit harmoniously into the general surroundings of simple country life. Most likely, this will be the most common type of internal washbasins - “moidodyr”. How to make this washbasin out of wood? We will need boards 25x150 mm.

In vertical blanks, it is necessary to cut out recesses in advance (depth 20 mm, width 8 mm). This can be done using hand router. In horizontal workpieces, using a regular hacksaw, tenons are cut accordingly.

The hacksaw should be sharp enough and have fine teeth. Canvas length: 25–30 cm.

The size of the future washbasin is largely determined by the dimensions of the water container that we plan to use for it. It is also important for us to know for sure the dimensions of the sink that we will mount on the cabinet. After everything is cut to size and the technological recesses along with the spikes are cut, the washbasin is assembled like a construction set. However, it would be better to secure the connection points with wood screws.

The upper (or side) part of the structure has a niche where we should insert the finished water container.

For such a washbasin, a 20-liter galvanized tank (width: 490 mm, height: 360 mm, thickness: 140 mm) is better suited.

We reinforce the bottom of the washbasin cabinet with slats (20×45 mm) at the same distance from each other. Rear wall We cover the upper part of the “moidhole” with plywood - from 3 mm and secure it with self-tapping screws. Of course, it’s better to use moisture-resistant plywood for this kind of thing in case the water container leaks, but if it doesn’t, don’t worry.

As for the cabinet door, everything is simple here: to the frame of four small interconnected wooden planks On the back side we glue a square of 3 mm plywood using PVA glue. All that remains is to embed the lock with curly pen. All, wooden frame"Moydodyra" is assembled. Now finishing touch- This means sanding, painting the product, and then installing the sink. It will turn out very nice.

There are a lot of options for washbasins and they are all good in themselves. The question is which design you will prefer. Much, of course, depends on the functions you assign to it. One way or another, a washstand/sink is convenient in all respects. And if it’s at the dacha, then even more so. Therefore, we hope that this article was useful to you.

Video

This video is about creating an exclusive washbasin for a summer house:

See how you can make a homemade washstand from a five-liter plastic bottle:

Photo