How to quickly build a snow slide. How to fill a winter wooden slide

Many will agree that it is impossible to imagine winter without snowdrifts and ice slides. Of course, for about three months during the winter you can think about making a snow slide. Moreover, all work can be done with your own hands without outside help. Such a structure will be a real joy for your kids. But it will also please adults. Moreover, all work can be completed quickly and without much difficulty.

The easiest way to have a beautiful front lawn

You've certainly seen the perfect lawn in a movie, on an alley, or perhaps on your neighbor's lawn. Those who have ever tried to grow a green area on their site will no doubt say that this is a huge amount of work. The lawn requires careful planting, care, fertilization, and watering. However, only inexperienced gardeners think this way; professionals have long known about the innovative product - liquid lawn AquaGrazz.

In order to successfully build snow slide, we will need:

• a lot of snow;
• a pair of shovels;
• much water.

All are listed here necessary tools for the construction of our slide.

Choosing a place for the slide

First, every summer resident must take care of choosing a place where the slide can be located in the future. We choose a location based on maximum safety for children, that is, the structure should be located at a great distance from the roadway.

Then we check this area for spaciousness so that children can easily approach the slides. Moreover, than bigger slide and the better the ice on it, the more open area required. Only in this case will children be able to ride the slide freely.

Determining the height and length of the slide

In the marked area you need to make a huge snow mountain, to do this we throw a large number of snow. It follows that we choose the height and width based on your strengths. We make it as high as possible, but within reasonable limits. However, if you want to make a children’s slide, then you don’t need to get too carried away: in this option, we proceed from our convenience and the safety of the kids. It is clear that we carry out all the work in winter, when it’s outside subzero temperature.

The photo shows a slide with steps

Regarding the length, fans of this Russian fun for the winter advise making a slide no less than 5 m long; you can make a little more. However, keep in mind that you should not make a very long snow slide for children.

Shape and angle of the slide

Another important point When preparing a slide, it’s a matter of choosing its shape. There is no need to opt for an ordinary slide, that is, a classic form. You have the opportunity to make it with many turns in different directions. For example, such a slide can be seen on bobsleigh tracks. Or a slide with an arch is another current option. You can also try your own skills in making snow sculptures; you can make not just a skating rink, but fairy tale hero or a mythical figure.

The angle of inclination is also important. There is no need to do a very steep or, conversely, gentle option for children. The most acceptable angle of inclination should be at least 30, but not more than 50 degrees, and then the angle must be reduced over time. That is, the slide needs to be made flat. Well, for small children it is better to make a gentle slope out of snow with your own hands at the beginning of work.

Are steps necessary? Of course, if you are making a slope for young children. You can refrain from making steps if your kids are over 5 years old. And where exactly – definitely from the highest area of ​​the hill.

Don’t forget about making sides on the sides of the steps, approximately 30 centimeters high. Also keep in mind that you can make small sides along the edges of the slope so that the kids don’t fly off the slope when skating.

Stages of pouring a slide with your own hands

To begin the work, we first take buckets with cool water or a hose, go up the steps to our slope and start pouring - we don’t rush, we do all the work carefully so that the entire structure is not damaged. When pouring, you need to level the surface of our slope - only in this way can you get a perfectly flat surface. Areas where holes have appeared from the liquid must be densely filled with snow and watered again.

1. First of all, make sure that you have all the necessary items available. This includes shovels, watering cans and buckets. If you have all this at your disposal, then the next step is to find people who will agree to help you in this difficult matter. This is where you can motivate people. We can say that this “attraction” will be able to please everyone in the yard, and not only children, but also adults will be able to ride it. You will see, after an hour of active searching, you will find like-minded people.
2. The people have gathered, all the necessary items for organizing the labor process are available, which means we can begin. First, collect a large pile of snow in one place. You can clean the area and dump all the snow in one place. So the benefit will be great, since you will help the wipers in this case, and you will be able to collect a large pile of snow in order to create a slide.

3. Compact the collected snow very tightly. The height of the snow slide should be such that it is comfortable for both adults and children to ride on it. It is important that it is very comfortable not only for children, but also for adults in this case. If the snow slide cannot be assembled, ask a person to snow blower Can I help you. I think that he will not deny you this pleasure.

4. Having poured a certain amount of snow onto the hill, and then compacted it, level its future descent. It is important that it is as smooth as possible, so manually, or using a shovel, remove all unevenness visible to the eye. Don't forget to make a step for your slide. Otherwise, how will you climb it? The steps should be as level and gentle as possible. This is very important if you want to keep your health and the health of other people safe and sound.

5. At the same time as leveling the slide, compact its edges so that it does not crumble at the first contact with your hand. It is best to make a low side along the edges of the slope, which will prevent you from sliding down the hill in the wrong place. IN in this case, this will help prevent all kinds of injuries when biting and climbing a hill. Be careful!

6. After the slide has already been formed, you can start pouring it! It is important that the outside temperature remains below freezing while applying the final touch. It will be best if you water it at night. It is best to water from a watering can or bucket. But it’s better if you water the slide from a watering can, because it is this that will give the slide an even descent and create indelible impression from the process itself. Thus, by filling the slide at night, you will protect it from unauthorized persons. It’s unlikely that anyone would think of climbing a hill in the dark, much less riding it. After all, your neighbors are far from stupid people.

It is necessary to build and fill the slide at sub-zero temperatures

News of Tyumen and Tyumen region - 12/21/2015

The most pleasant memory from childhood is, of course, winter fun. Games in the snow, sledding, skating, skiing and slides. We will talk about the latter in more detail and describe how to make it from snow and how to fill it correctly.

How to build a slide with your own hands in Tyumen

In practice, many have encountered a serious problem when . It either disintegrates, collapses, or pits form on it after pouring. We will teach you how to make the right slide yourself without unnecessary physical effort.

So, let's begin. To build a slide yourself, you will need:

- Pure snow

- The water is cold)

- Shovel or stretcher

- Ladle, watering can

- Broom

To build a snow slide, you need to follow a few simple rules:

Choose a safe place

1) If you build it in kindergarten or in your yard, then you don't need to be careful of nearby roads. And if you are making a slide in an unfenced area, then you need to choose a safe place. Away from the roadway, away from various obstacles, bushes, trees, fences, etc., so as not to harm the child.

You need to build a slide from pure snow

2) After the place is determined, it is necessary to haul a lot of clean snow. The average and safest slide for children is from two to four meters. You can shovel snow either with a stretcher or with a large shovel. We used a shovel. Let's say in advance that it took us half an hour to build a meter-long slide. Most of the time it took to bring it to the place required amount snow. Then we collected the snow in one pile and formed a base from it - a slide.

How to make steps and sides for a snow slide

3) After the base we make steps. They are easy to make with a shovel. You need to compact it first with your feet and then shape it with a shovel. It is important to make them comfortable and small so that the child can easily climb to the top. By the way, the safe width of steps is from fifty centimeters. Don't forget about the sides. They can also be made with a shovel and your hands. Choose the height based on the height and weight of your child. On average, the sides are made 10-30 centimeters.

How to properly fill a snow slide

4) When the base of the slide is formed, we move on to the most difficult process: pouring. The slope is filled only with cool water from a watering can, hose with a spray nozzle or a ladle. It should be remembered that it is necessary to fill at a low temperature - on average from minus 10-20 degrees. Otherwise, all your efforts are down the drain. Important! You need to fill the slide in three to four stages. In order for the slide to be level, without holes and bumps, you need to use when pouring ordinary broom. Yes, yes, a broom! We use a broom to level the surface of the slide, and your children can easily slide down the slide with great pleasure!

When pouring a slide, you need to smack the surface with a broom.

5) The snow slide is filled with water several times. After the first, a thin and fragile crust forms, after the second, a rough frost forms, and the third time can be filled in for maximum strength and smoothness of the surface. When pouring a slide for the first time, smack the surface with a broom! If you follow all these rules, you will have a great homemade slide!

• Choose pure snow! If you neglect this rule, then when it gets significantly warmer outside, your children may get dirty!

• Try to make the slide more even, without holes, depressions and bumps. If there are sharp bumps on the slide, children may tear their clothes.

• The good and best height for children is two meters, and for older children - three, four meters or more. For small children, it is better to provide the necessary supports to avoid falls.

• You need to ride the slide on ice. You can buy ice cream in a store for an average of 100 rubles or make it yourself. You can make an ice cube from linoleum or use simple cardboard.

All children are looking forward to winter. After all, this time of year brings with it a lot of entertainment and fun. New Year holidays- not all that the cold season has to offer. Ice skating and skiing, throwing snowballs, exciting sleigh rides - all this and much more is given to us by the generous winter season. If you want to give joy to yourself and your loved ones, learn how to fill a slide.

You will need:

• Shovel;
• Bucket;
• Watering can;
• Warm gloves;
• Latex gloves;
• Wooden plank.

Show others

Engineering survey

• First, take a look at the area where you plan to place your homemade attraction. Of course, the longer the track, the more fun it is to slide down it.
• In order to fill correctly ice slide, remember: the slope should not be too steep. The ideal ratio of height and length is 1 to 4.
• In addition, it is necessary to equip the so-called “roll-out”. This is a flat area on which sliding will continue. It should be about one and a half times longer than the inclined surface.

Construction technology

1. When filling the slide, put on warm gloves and thick rubber gloves on top.
2. It is best to wait until it thaws, then it will be easier to work. Roll snow balls and lay out a base of them according to pre-prepared dimensions.
3. Before filling the slide, you need to take care of the ladder along which you will have to climb to the hill. It can also be made from similar lumps. Make and lay wide steps.
4. Thoroughly compact the surface with a shovel.
5. It is better to fill the ice slide when it starts to freeze again. This should be done warm water. You can use a garden watering can to distribute the liquid evenly.
6. You may notice some bumps and indentations appear. They need to be patched up. Use diluted snow cold water, apply it with a regular spatula.
7. You need to build curbs from the snow mass. This will make the entertainment safe.
8. Once you are able to properly fill the slide, take a flat board and run it across the surface to get rid of any remaining unevenness.

Now is the time to invite the neighborhood kids, who will be happy to test the device’s strength. It seems that it will not be difficult for you to fill the slide yourself. Of course, you will have to spend several hours at work. However, until spring you will be able to have a fun and active holiday without leaving your own yard.

Winter is just around the corner, and for kids it's school holidays. Any parent wants their child to have fun and useful time during this period. Of course, walks are also important for children and adults. fresh air and family leisure. To prevent them from turning into a boring pastime, you can entertain yourself. For example, build a snow slide together with your children, and then have fun sliding down it. We will tell you how to do this in this article.

snow Hill

Since ancient times in Rus' it was customary to ride down the hills on a sleigh. This was a favorite pastime for both old and young. Those who live in hilly or mountainous areas are lucky enough to just wait for snowy weather and the slide is ready. And most importantly, you don’t need to make any effort. Well, if there is no hillock near your house, or you live in apartment building You can build a slide yourself. We'll tell you how to do this later.

DIY snow slide

Making a slide with your own hands is not that difficult. For this you will need:

• prepared site;
• snow;
• several shovels;
• water.

First, you need to choose a place for the future slide. It is best to place it in an open area further from roads. This is primarily a matter of the safety of the children themselves. If necessary, clear the area of ​​debris. The size of the slide is also important; a small slide will be uncomfortable for children to ride, while a very large one may not be safe for children. The height should be comfortable and preferably below the height of an adult. This will make it more comfortable for you to monitor and help your child. It is best to make the length 5 m, this is the most optimal length. The shape of the slide is also important.

Show your imagination and make it with a twist, or decorate it with an arch at the top. Children will have a lot of fun riding on a custom slide. The place has been marked, now you need to throw the snow in the shape of a slide and compact it. Everything must be done evenly and in several stages. The angle of the slide should be from 30 to 50 degrees. The slope angle can be adjusted by adding material. If the slide is intended for small children, then it must be made flat from the very beginning of work. For convenience, it is necessary to provide steps along which children will climb the slide. To prevent them from slipping, you can lay them out with planks. Along the length of the slope itself, you can make a small side of snow to prevent children skating from falling. After completing the main work, it is recommended to fill the slide with water. To do this, you can take a bucket of water and gradually water it starting from the steps. Then let the water freeze and repeat the procedure several more times until the surface becomes smooth. If cracks and holes appear on the slope during the pouring process, they must be filled with snow and watered. After this, it is recommended to leave the slide overnight, during which time the water will freeze and in the morning the children will be able to slide down it.

How to make a snow slide

Making a snow slide is quite simple. This will require a minimum of equipment, just a couple of shovels, pieces of plywood and snow. The snow slide has a number of positive aspects:

1. Children can be involved in the work, regardless of age;
2. no material costs;
3. pliable material gives great scope for imagination;
4. the ability to add new elements at any time.

There is only one drawback - it's seasonality. The slide will delight everyone only throughout the winter. The main thing is that adults and children can show their imagination and create something original. To simplify the work, you can build a frame from pieces of plywood. Secure them firmly and cover them with snow. Having made the descent and steps, you should take care of safety. Make sides along the edges of the slope and provide small handrails for ease of climbing the slide. After which the entire slide must be covered with water to form an ice glaze. It will give strength to the entire structure. For convenience and safety, the uppermost platform of the structure can be covered with plywood. After which you need to wait until the next day and you can safely begin testing.

How to fill a snow slide

It would seem that it could be simpler to fill a snow slide with water. But, even here there are some nuances, the implementation of which will significantly simplify the work. For proper filling, the following rules must be observed:

• you need to protect your hands from cold and moisture, for this we wear warm gloves and rubber gloves on top;
• It is best to fill the surface in frosty weather;
• It is best to fill it with warm water, it will harden faster.

It's not all that difficult. For filling it is best to use regular garden watering can. With its help, the water will be more evenly distributed over the slide and the surface will be smoother. This process is quite labor-intensive. But a few hours of work are worth the happy children's eyes and ringing laughter. This will be the best reward for your efforts.

Snow slide

The snow slide can be made in different shapes and size. For example, you can build wooden frame with two descents. One steeper and longer for adults and older children, and the other with a lower angle and length of descent for children. After which the frame is filled with snow and the slide is ready. This structure will be strong and safe. And most importantly, it can be used in the warm season. Place sheets of tin or other sliding material on the slopes for the amusement of the children.

If you have imagination and free time, you can build a slide for children with arches in the form of a log cabin. This slide has several descents. It will be very interesting for children to ride down such a slide. The main thing is that they will have a fun and active time.

If desired, you can beautifully decorate even the most ordinary mountain. For this you will need paints and brushes. On the side surfaces of the slide you can draw Christmas trees, snowflakes and winter birds (for example, a bullfinch). Such simple patterns will appeal not only to children, but also to adults. Kids will enjoy sliding down the slide and admiring the drawings on the way up. As you can see, making a slide is quite simple, and with a little imagination you can make even the simplest model beautiful.

This article talks about snow slides and how you can build them with your own hands. Advice is given on filling the resulting structure with water. Describes how you can arrange appearance structures. Using the advice in the article, you can quickly build a safe slide for children using available materials. Fill it with water correctly and, if desired, decorate it in an original way. Good luck with your work.